Strong Anion Research Articles

Label-Free Quantitative Phosphoproteomics in the Fission Yeast Schizosaccharomyces pombe.

Protein phosphorylation is a dynamic, reversible posttranslational modification that plays an important role in the regulation of cell signaling. Recently, label-free quantitative (LFQ) phosphoproteomics has become a powerful tool to analyze the phosphorylation of proteins within complex samples. In this chapter, we describe how to apply LFQ phosphoproteomics that is based on Fe-IMAC phosphopeptide enrichment followed by strong anion exchange (SAX) and porous graphitic carbon (PGC) fractionation strategies for identification and quantification of changes in the phosphoproteome in the fission yeast Schizosaccharomyces pombe.

Regeneration of a Fire‐Resistant Fluid‐Fouled Strong Base Anion Resin using a Caustic Solution with Citric Acid as a Surfactant

AbstractFire Resistant Fluid (FRF), used in turbine governing systems, transforms during operation, forming substituted phenol and phosphoric acid. The use of strong Base Anion Resin (SBA resin) to reduce the Total Acid Number (TAN) of FRF is widespread. However, the regeneration of these oil‐fouled resins is crucial due to their high cost and the challenges associated with their environmental disposal. In this study, we present a novel method for recovering exhausted resin by treating it with an aqueous solution of citric acid, followed by regeneration with a caustic soda solution. We optimized the recovery percentage in the ion exchange capacity by testing varying concentrations of the citric acid solution under different reaction conditions. The highest recovery of ion exchange capacity achieved was 55 % after soaking for 16 hours in a 5 % citric acid solution, followed by regeneration with a 5 % NaOH solution. The efficacy of citric acid in this research was further explored through a Density Functional Theory (DFT) study. This study is significant as it is the first to demonstrate the successful regeneration of oil‐fouled resins with high ion exchange capacity using citric acid, a more environmentally friendly and cost‐effective alternative.

Micro scale chromatography of human plasma proteins for nano LC-ESI-MS/MS

Organic precipitation of proteins with acetonitrile demonstrated complete protein recovery and improved chromatography of human plasma proteins. The separation of 25 μL of human plasma into 22 fractions on a QA SAX resin facilitated more effective protein discovery despite the limited sample size. Micro chromatography of plasma proteins over quaternary amine (QA) strong anion exchange (SAX) resins performed best, followed by diethylaminoethyl (DEAE), heparin (HEP), carboxymethyl cellulose (CMC), and propyl sulfate (PS) resins. Two independent statistical methods, Monte Carlo comparison with random MS/MS spectra and the rigorous X!TANDEM goodness of fit algorithm protein p-values corrected to false discovery rate q-values (q ≤ 0.01) agreed on at least 12,000 plasma proteins, each represented by at least three fully tryptic corrected peptide observations. There was qualitative agreement on 9393 protein/gene symbols between the linear quadrupole versus orbital ion trap but also quantitative agreement with a highly significant linear regression relationship between log observation frequency (F value 4,173, p-value 2.2e-16). The use of a QA resin showed nearly perfect replication of all the proteins that were also found using DEAE-, HEP-, CMC-, and PS-based chromatographic methods combined and together estimated the size of the size of the plasma proteome as ≥12,000 gene symbols.

Comprehensive chromatographic profiling and structural analysis of key anticoagulant components in enoxaparin

Heparin is the most widely used anticoagulant in clinical practice, with enoxaparin being one of the most important low molecular weight heparins (LMWHs). In this study, an antithrombin III (ATIII) affinity column was used. Enoxaparin and its oligosaccharides of varying sizes, prepared using preparative size exclusion chromatography (SEC), were fractionated through the ATIII affinity column. The different affinity fractions from each oligosaccharide size were profiled using strong anion exchange (SAX) chromatography. Each peak was automatically transferred to an SEC column for desalting prior to mass spectrometry (MS) analysis, which enabled structural identification using a multiple heart-cut (MHC) 2D LC-MS system (SAX-SEC-MS). The high-affinity fraction from enoxaparin was further analyzed using the MHC 2D LC system (SEC-SAX). SAX profiles of the high-affinity oligosaccharides, prepared by both size and affinity fractionation, were consistent with those obtained by direct SEC-SAX analysis. The possible sequences of several high-affinity hexasaccharides and the domain compositions of high-affinity octa- and decasaccharides in enoxaparin were further elucidated by disaccharide analysis after manual collection of the oligosaccharides. This work advances the understanding of enoxaparin's structural features and offers a potential approach to improve the quality of enoxaparin, as well as to identify key structural motifs in heparin/LMWHs that contribute to protein binding.

Impact of dicarboxystilbene impurities on the properties of swift heavy ion latent tracks in PET films

We present a new hypothesis and supporting experimental evidence about the essential role played by small impurities of dicarboxystilbene in the process of UV treatment of PET films irradiated with swift heavy ions (SHI). This treatment both forms highly selective membranes with permeability values comparable to natural ones (the track-UV technique) and sharply accelerates the etching of latent tracks in membrane production (the track-etching technique). We hypothesize (1) that these high permeability value is due to the presence of a molecular motor of an Archimedes screw type in the central part of the latent track formed by photoinduced trans-cis isomerization of dicarboxystilbene molecules that are anchored in helical conformations in the latent track; and (2) that the acceleration of etching rates is due to the preferential accumulation of phenanthrene-type molecules in the central part of the latent track due to the existence of a cyclization channel for photoexcited molecules of cis-dicarboxystilbene. In the presence of alkali solution, phenanthrene molecules release electrons which behave as strong anions in aqueous solution, catalyzing alkaline hydrolysis of PET molecules in the central part of the track. We present experimental observations of photoinduced changes in transmission light intensity after track-UV light treatment of both pristine and SHI irradiated PET films that confirm the presence of trans-cis isomerization of dicarboxystilbene molecules and show their contribution to the formation of new helical conformations in SHI irradiated PET films during the light treatment.

An improved high-resolution method for quantitative separation of empty and filled AAV8 capsids by strong anion exchange HPLC.

Cell and gene therapy (CGT) is a field of therapeutic medicine that aims to treat, prevent, and cure diseases using engineered cells (stem cells, immune cells, and differentiated adult or fetal cells), vectors [Adeno Associated Virus (AAV), Adeno Virus (AV), Herpes Simplex Virus (HSV), Baculo Virus (BV), Lenti Virus (LV), Retro Virus (RV), etc.], and other carriers [non-viral vectors, virus-like particles (VLP), Lipid Nano-Particles (LNP), etc.]. Among viral CGT vectors, adeno-associated viruses and lentiviruses (AAV and LV) are the most widely applied vector platforms. The presence of non-functional (empty or non-infectious) vectors that carry null or partial genes in the final drug product is classified as an impurity by the FDA. These impurities impair dosage accuracy and induce non-specific immunogenicity and variability in drug efficacy. These non-functional viral vectors in the drug product need to be elucidated following International Conference on Harmonization (ICH) guidelines for clinical manufacturing of the final drug product. This article showcases an ion-exchange chromatography (IEX) high-resolution method supporting ICH guidelines using commercially available AAV8 filled and empty capsids as reference standards. Our method successfully separated empty to full capsids with a resolution of 15 and sustained a linearity greater than 0.98 even under a wide range of empty or full viral particle concentrations (E+9 to E+13 vp/mL), which is an upgrade to other IEX capsid separation methods. The medium-throughput capacity and shorter sample processing time improve testing efficiency and save costs while delivering quality as value. The discussed method is a reliable and reproducible platform to precisely evaluate the presence of non-functional viral particles in AAV8 samples. Aligned with other orthogonal results, the method is a powerful tool to improve the quality of rAAV analytics.

Simultaneous determination of glyphosate, glufosinate and their metabolites in soybeans using solid-phase analytical derivatization and LC-MS/MS determination

Glyphosate and glufosinate are the most widely used herbicides worldwide. We developed a simple and rapid analytical method for detecting glyphosate, glufosinate, and their metabolites (N-acetyl glyphosate: Gly-A, N-acetyl glufosinate: Glu-A, and 3-(hydroxymethylphosphinyl)propanoic acid: MPPA) in soybeans. The method involved extraction with water, trapping in a mini-column containing polymer-based resin with strong anion exchange groups, dehydration with acetonitrile, and solid-phase analytical derivatization at ambient temperature for 1 min using N-(tert-butyldimethylsilyl)-N-methyl trifluoroacetamide (MTBSTFA), followed by Liquid chromatography-tandem mass spectrometry (LC-MS/MS) determination. This method offers a straightforward and rapid analysis, using on-solid phase dehydration and rapid derivatization at an ambient temperature with MTBSTFA, yielding reliable results for glyphosate, glufosinate, and their metabolites. The method was applied to both domestic and imported soybean samples. Glyphosate, glufosinate, and Glu-A were detected in imported feed soybeans and processed soybean meal for feed use, reflecting the current conditions of GM soybean cultivation.

Observation of monotonic surface charging at polycrystalline platinum-electrolyte interface using streaming current method

Surface charging characteristics at polycrystalline Pt-electrolyte interfaces were studied using a novel combination of electrochemical techniques and electrokinetic streaming current methods developed by our group [Saha et al., 2019]. Surface charge typically increases with increasing electric potential on a metal, and this trend is commonly referred to as monotonic charging. Based on theoretical models, it was suggested that the Pt-electrolyte interface might deviate from this trend and have negative charge above the potential of zero charge (PZC) due to the metal's strong chemisorption properties [Huang et al., 2016]. We attempted to experimentally determine the validity of this claim using our method. In addition to the surface charging relations, we also quantified the effect of anion adsorption (oxide, chloride, sulfate) on surface charging. The experimental method also allowed us to observe the slow time-dependent growth of oxides on Pt surface. Since our first publication in 2019 [Saha et al., 2019], we were able to develop the setup to be more efficient that enabled us to apply higher potential on the metal, observe stronger ion adsorption effects on surface charging, and obtain more reliable data. Our recent experimental study shows that Pt charging remains monotonic and does not reverse due to chemisorption of oxides nor strong anion adsorption in the potential window where the charge reversal was theoretically shown to occur.

Accurate non-ceruloplasmin bound copper: a new biomarker for the assessment and monitoring of Wilson disease patients using HPLC coupled to ICP-MS/MS.

Assessment of Wilson disease is complicated, with neither ceruloplasmin, nor serum or urine copper, being reliable. Two new indices, accurate non-ceruloplasmin copper (ANCC) and relative ANCC were developed and applied to a cohort of 71 patients, as part of a Wilson Disease Registry Study. Elemental copper-protein speciation was developed for holo-ceruloplasmin quantitation using strong anion exchange chromatography coupled to triple quadrupole inductively coupled plasma mass spectrometry. The serum proteins were separated using gradient elution and measured at m/z 63 (63Cu+) and 48 (32S16O+) using oxygen reaction mode and Cu-EDTA as calibration standard. The ANCC was calculated by subtraction of the ceruloplasmin bound copper from the total serum copper and the RelANCC was the percentage of total copper present as the ANCC. The accuracy of the holo-ceruloplasmin measurement was established using two certified reference materials, giving a mean recovery of 94.2 %. Regression analysis between the sum of the copper containing species and total copper concentration in the patient samples was acceptable (slope=0.964, intercept=0, r=0.987) and a difference plot, gave a mean difference for copper of 0.38 μmol/L. Intra-day precision for holo-ceruloplasmin at serum copper concentrations of 0.48 and 3.20 μmol/L were 5.2 and 5.6 % CVand the intermediate precision at concentrations of 0.80 and 5.99 μmol/L were 6.4 and 6.4 % CV, respectively. The limit of detection (LOD) and lower limit of quantification (LLOQ) for holo-ceruloplasmin were 0.08 and 0.27 μmol/L as copper, respectively. ANCC and Relative ANCC are important new diagnostic and monitoring biomarker indices for Wilson disease (WD).

Facile Synthesis of Donor-Acceptor Heterocycloarenes Based on Pyrazine Derivatives Possessing Intriguing Iodide Ion Capture Properties.

Donor-acceptor (D-A) conjugated systems have been extensively investigated and play important roles in organic electronics. Incorporating D-A structures into (hetero)cycloarenes endows them tunable electronic properties, while the well-defined cavity remains. However, the synthetic complexity of introducing electron-acceptor moieties into (hetero)cycloarenes limits their development and applications. In this paper, the first family of electronically tunable D-A heterocycloarenes (DAHCn, n = 1-5) based on pyrazine derivatives was facilely synthesized through cyclocondensation reaction from a tetraketone-functionalized heterocycloarene precursor prepared using the ketal-protection strategy. The effect of expanded conjugation and the inserted electron-withdrawing group on the electronic structures of the D-A heterocycloarenes was studied systematically by X-ray crystallographic analysis, various spectroscopic measurements, and theoretical calculations. Interestingly, the presence of an electron-withdrawing group polarizes the inner C(sp2)-H and significantly increases the binding affinities of D-A heterocycloarenes to the iodide anion. Meanwhile, the anion affinity can be further modulated by the type of attached substituents and the distance of polarization. More importantly, the dicyanopyrazine derivative DAHC3 shows the highest binding strength to the iodide ion as a 2:1 sandwich complex (log β2 = 12.3 and ΔG = -69.1 kJ mol-1), which is the strongest iodide receptor using C(sp2)-H hydrogen bonding interactions reported to date. Our finding provides a new strategy to design and synthesize D-A heterocycloarenes and strong anion receptors.

Small sized of anion doping effect on semiconducting single-walled carbon nanotube network for field-effect transistors

Carbon nanotubes have shown great promise for high-performance, large-area, solution processable field-effect transistors due to their exceptional charge transport properties. In this study, we utilize the spin-coating method to form networks from selectively sorted semiconducting single-walled carbon nanotubes (s-SWNTs), aiming for scalable electronic device fabrication. The one-dimensional nature of s-SWNTs, however, introduces significant roughness and charge trap sites, hindering charge transport due to the van der Waals gap (∼0.32 nm) between nanotubes. Addressing this, we explored the effects of anion doping on the spin-coated s-SWNT random network, with a focus on the influence of the small size of halogen anions (0.13–0.22 nm) on these electronic properties. Raman and ultraviolet–visible–near-infrared optical spectroscopy results indicate that smaller anions significantly enhance doping effects through strong non-covalent anion–π interactions, improving charge transport and carrier injection efficiency in s-SWNTs, especially for n-type operation. This improvement is inversely proportional to the size of the halogen anions, with the smallest anion (fluorine) effectively transitioning the electrical characteristics of the s-SWNT network from ambipolar to n-type by reducing both junction and contact resistances through anion doping, based on anion–π interaction.

Separation of weak acids, neutral compounds, and permanent anions using sequential elution liquid chromatography with tandem columns

This paper discusses the development of an analytical method by an alternative separation approach, sequential elution liquid chromatography (SE-LC), to separate permanently charged ions (anions), weak acids, and neutral compounds using anion exchange and reversed-phase columns in tandem. SE-LC separates classes of compounds by group by employing two or more elution modes. Advantages to using SE-LC over conventional HPLC are a greater peak capacity and a reduced separation disorder. Importantly, the same HPLC as used for a conventional HPLC separation may be used to afford a successful SE-LC separation. Mobile phase selection and gradient optimization are integral for a successful SE-LC class separation of permanent anions, weak acids, and neutral compounds and will be discussed in detail in this paper. The most successful (best resolution and repeatability) SE-LC separation was achieved by applying isocratic elution at low pH to elute the weak acids, followed by an acetonitrile gradient to elute the neutral compounds, and last a sodium methanesulfonate gradient to elute the anionic compounds using a superficially porous C18 column coupled with a strong anion exchange (SAX) column. Repeatability (RSD) in the retention times and peak areas of the analytes was less than 0.25 % and 1.5 %, respectively.

Morphology engineering of nanofibrous poly(acrylonitrile)-based strong anion exchange membranes for enhanced protein adsorption and recovery

The (bio)pharmaceutical and food industries are transitioning towards circular economy to minimise waste and foster sustainability in the supply chain of biomolecule-based drugs and supplements. Membrane chromatography is expected to play a crucial role in this transition, with the potential to maximize recovery and reduce operating costs. The development of chromatographical membranes is however impeded by the lack of understanding on the membrane structure – chemistry – performance relationship. Here a one-pot synthesis of anion exchange membranes with engineered nanofibrous morphology was studied by electrospinning the blend of polyacrylonitrile (PAN) and tailored quaternized poly(acrylonitrile)-co-poly(2-(dimethylamino)ethyl acrylate) copolymer containing 15 mol% of functional groups, namely PAN-pAQ membranes. Comprehensive evaluations were conducted on the influence of the electrospinning parameters on the nanofibre morphology, surface properties and binding capacity of model protein bovine serum albumin (BSA). The fibre alignment was shown to play a significant role, i.e., membrane with anisotropic fibres obtained by increasing the drum rotational speed to 2000 rpm allowed a high BSA binding capacity of 166 mg∙g−1, i.e., 45–66 % higher than other membranes with randomly-oriented nanofibres. This study is expected to contribute towards the design of future membranes for effective purification and recovery of biomolecules from natural and waste streams, promoting circular bio-economy.

Highly sensitive two-dimensional ion chromatography mass spectrometry method for nitrite determination in hydroxypropyl methylcellulose

Due to their potential adverse health effects, some N-nitrosamines in drug products are strictly regulated with very low maximum daily intake limits. Nitrosamines can be formed from the reaction of nitrite and secondary or tertiary amines when both species co-exist in the drug synthesis or formulation process. One key strategy to mitigate nitrosamine risk in drugs is to select low-nitrite containing pharma excipients for formulation. It is necessary to develop a sensitive method for trace nitrite determination in pharma excipients as it enables drug producers to study nitrosamine formation kinetics and select excipient suppliers. This study details the development and validation of a two-dimensional ion chromatography mass spectrometry (2D-IC/MS) method for trace nitrite determination in hydroxypropyl methylcellulose (HPMC), one of the most important pharmaceutical excipients used in many drug formulations. The 2D-IC system was operated in heart-cutting mode with a concentrator column coupling the two dimensions. A standard bore anion-exchange column was used in the first dimension (1D) to enable a large volume injection for increased sensitivity and provide improved resolution between nitrite and the interfering chloride peak. A high efficiency microbore anion-exchange column with different selectivity was used in the second dimension (2D) to resolve nitrite from other interfering species. The use of 2D-IC resulted in significantly improved resolution, solving the sensitivity loss issue due to ion suppression from an otherwise 1D separation. MS detection with selective ion monitoring and isotope labeled nitrite internal standard further improve the method specificity, accuracy, and ruggedness, as compared with conductivity detection. For trace determination, it is also extremely important to have a clean blank. For this purpose, a novel cleaning procedure using a strong anion wash was developed to remove nitrite contamination from labware. The optimized method was validated with linearity of nitrite in the concentration range of 18.5–5005.8 ng/g having a regression coefficient of >0.9999, precision with RSD at 3.5–10.1 % and recovery of 90.5–102.4 %. The limit of detection and limit of quantitation were 8.9 and 29.6 ng/g relative to the HPMC sample, or equivalent to 89 and 296 pg/g in the sample solution, respectively.

Site-specific identification and quantitation of endogenous SUMOylation based on SUMO-specific protease and strong anion exchange chromatography

Small ubiquitin-like modifier (SUMO) modification regulates various eukaryotic cellular processes and plays a pivotal role in interferon (IFN)-mediated antiviral defense. While immunoprecipitation enrichment method is widely used for proteome-wide analysis of endogenous SUMOylation, the inability to target all SUMO forms and high cost of antibodies limited its further application. Herein, we proposed an antibody-free enrichment method based on SUMO-specific protease and strong anion exchange chromatography (SPAX) to globally profile the endogenous SUMOylation. The SUMO1/2/3-modified peptides could be simultaneously enriched by SAX chromatography by utilizing its electrostatic interaction with SUMO1/2/3 remnants, which contained multiple aspartic acids (D) and glutamic acids (E). To remove the co-enriched D/E-containing peptides which might interfere with the detection of low-abundance SUMOylated peptides, SUMO-specific protease was used to cleave the SUMO1/2/3 remnants from enriched SUMOylated peptides. As the deSUMOylated peptides lost SUMO remnants, their interaction with SAX materials became weaker, and the D/E-containing peptides could thus be depleted through the second SAX separation. The SPAX method identified over twice the SUMOylated sites than using SAX method only, greatly improving the identification coverage of endogenous SUMOylated sites. Our strategy was then applied to the site-specific identification and quantification of endogenous SUMOylation in A549 cells stimulated by IFN-γ for the first time. A total of 226 SUMOylated sites on 146 proteins were confidently identified, among which multiple up-regulated sites were involved in IFN-mediated antiviral defense, demonstrating the great promise of SPAX to globally profile and discover endogenous SUMOylation with significant biological functions.

A new approach towards highly sensitive detection of endogenous N-acetylaspartic acid, N-acetylglutamic acid, and N-acetylaspartylglutamic acid in brain tissues based on strong anion exchange monolith microextraction coupled with UHPLC-MS/MS.

Anovel in-tube solid-phase microextraction coupled withan ultra-high performance liquid chromatography-mass spectrometry method has been established for simultaneous quantification of three crucial brain biomarkers N-acetylaspartic acid (NAA), N-acetylglutamic acid (NAG), and N-acetylaspartylglutamic acid (NAAG). A polymer monolith with quaternary ammonium as the functional group was designed and exhibited efficient enrichment of target analytes through strong anion exchange interaction. Under the optimized conditions, the proposed method displayed wide linear ranges (0.1-80 nM for NAA and NAG, 0.2-160 nM for NAAG) with good precision (RSDs were lower than 15%) and low limits of detection (0.019-0.052 nM), which is by far the most sensitive approach for NAA, NAG, and NAAG determination. Furthermore, this approach has been applied to measure the target analytes in mouse brain samples, and endogenous NAA, NAG, and NAAG were successfully detected and quantified from only around 5mg of cerebral cortex, cerebellum, and hippocampus. Compared with existing methods, the newly developed method in the current study provides highest sensitivity and lowest sample consumption for NAA, NAG, and NAAG measurements, which would potentially be utilized in determining and tracking these meaningful brain biomarkers in diseases or treatment processes, benefiting the investigations of pathophysiology and treatment of brain disorders.

Automated synthesis of [89Zr]ZrCl4, [89Zr]ZrDFOSquaramide-bisPh(PSMA) and [89Zr]ZrDFOSquaramide-TATE

BackgroundAutomated [89Zr]Zr-radiolabeling processes have the potential to streamline the production of [89Zr]Zr-labelled PET imaging agents. Most radiolabeling protocols use [89Zr][Zr(ox)4]4− as the starting material and oxalate is removed after radiolabeling. In some instances, radiolabeling with [89Zr]ZrCl4 as starting material gives better radiochemical yields at lower reaction temperatures. In this work, a fully-automated process for production of [89Zr]ZrCl4 is reported and its use for the synthesis of [89Zr]ZrDFOSq-bisPhPSMA and [89Zr]ZrDFOSq-TATE.ResultsA simple automated process for the isolation of [89Zr]ZrCl4 by trapping [89Zr][Zr(ox)4]4− on a bicarbonate-activated strong anion exchange cartridge followed by elution with 0.1 M HCl in 1 M NaCl was developed. [89Zr]ZrCl4 was routinely recovered from [89Zr][Zr(ox)4]4− in > 95% yield in mildly acidic solution of 0.1 M HCl in 1 M NaCl using a fully-automated process. The [89Zr]ZrCl4 was neutralized with sodium acetate buffer (0.25 M) removing the requirement for cumbersome manual neutralization with strong base. The mixture of [89Zr]ZrCl4 was used for direct automated radiolabeling reactions to produce [89Zr]Zr-DFOSquaramide-bisPhPSMA and [89Zr]ZrDFOSquaramide-TATE in 80–90% over all RCY in > 95% RCP.ConclusionsThis method for the production of [89Zr]ZrCl4 does not require removal of HCl by evaporation making this process relatively fast and efficient. The fully automated procedures for the production of [89Zr]ZrCl4 and its use in radiolabeling are well suited to support the centralized and standardized manufacture of multiple dose preparations of zirconium-89 based radiopharmaceuticals.

Physicochemical control of solvation and molecular assembly of charged amphiphilic oligomers at air-aqueous interfaces

Hypothesis: Understanding the rules that control the assembly of nanostructured soft materials at interfaces is central to many applications. We hypothesize that electrolytes can be used to alter the hydration shell of amphiphilic oligomers at the air-aqueous interface of Langmuir films, thereby providing a means to control the formation of emergent nanostructures.Experiments: Three representative salts – (NaF, NaCl, NaSCN) were studied for mediating the self-assembly of oligodimethylsiloxane methylimidazolium (ODMS-MIM+) amphiphiles in Langmuir films. The effects of the different salts on the nanostructure assembly of these films were probed using vibrational sum frequency generation (SFG) spectroscopy and Langmuir trough techniques. Experimental data were supported by atomistic molecular dynamic simulations.Findings: Langmuir trough surface pressure – area isotherms suggested a surprising effect on oligomer assembly, whereby the presence of anions affects the stability of the interfacial layer irrespective of their surface propensities. In contrast, SFG results implied a strong anion effect that parallels the surface activity of anions. These seemingly contradictory trends are explained by anion driven tail dehydration resulting in increasingly heterogeneous systems with entangled ODMS tails and appreciable anion penetration into the complex interfacial layer comprised of headgroups, tails, and interfacial water molecules. These findings provide physical and chemical insight for tuning a wide range of interfacial assemblies.

Chromatographic purification of C-phycocyanin from Spirulina platensis: assessing antioxidant activity and stability.

The efficient separation and purification of proteins like C-phycocyanin (C-PC) from Spirulina platensis are essential for their commercialization, yet they remain challenging. This study investigated three chromatographic methods for C-PC purification: weak anion exchange chromatography (DEAE), strong anion exchange chromatography (Q Sepharose), and hydrophobic interaction chromatography (HIC). Weak anion exchange chromatography achieved a recovery of 36.80 mg unit (57.08%) with a purity of 3.23, outperforming Q Sepharose (yield: 23.21 mg unit means that 46.33%, purity: 2.76) and HIC (yield: 22.95 mg unit means that 17.57%, purity: 3.02). The purified C-PC consisted of α and β subunits with molecular masses of 16 kDa and 17 kDa, respectively. Further assessment revealed its antioxidant capacity through a 2,2'-Azino-bis(3-ethylbenzothiazoline-6-sulfonic acid) (ABTS) assay. The stability of C-phycocyanin was tested at different pH levels and temperatures. Maximum stability was observed at pH 7, and pH 4 showed the lowest stability. Glutaraldehyde-treated C-PC (GC-PC) demonstrated gradual degradation up to 50 °C, retaining 73.25% after 30 min. Notably, GC-PC exhibited stability even at higher temperatures, with degradation rates of 57.32% at 70 °C and 50.96% at 80 °C. Weak anion exchange chromatography proved superior for C-PC purification, offering higher yields and purity than Q Sepharose and HIC. The purified C-PC showed promising antioxidant capacity and stability, particularly GC-PC, which exhibited resistance to degradation, even at elevated temperatures. These findings underscore the potential of C-PC as a valuable compound for various applications, with DEAE chromatography being an efficient method for its production and commercialization. © 2024 Society of Chemical Industry.

An Iridium Complex as Bidentate Halogen Bond-Based Anion Receptor Featuring an IncreasedOptical Response.

We present a luminescent Ir(III) complex featuring a bidentate halogen bond donor site capable of strong anion binding. The tailor-made Ir(III)(L)2 moiety offers a significantly higher emission quantum yield (8.4 %) compared to previous Ir(III)-based chemo-sensors (2.5 %). The successful binding of chloride, bromide and acetate is demonstrated using emission titrations. These experiments reveal association constants of up to 1.6×105 M-1. Furthermore, a new approach to evaluate the association constant by utilizing the shift of the emission was used for the first time. The experimentally observed characteristics are supported by quantum chemical simulations.