Strong Anion Research Articles

An Iridium Complex as Bidentate Halogen Bond-Based Anion Receptor Featuring an IncreasedOptical Response.

We present a luminescent Ir(III) complex featuring a bidentate halogen bond donor site capable of strong anion binding. The tailor-made Ir(III)(L)2 moiety offers a significantly higher emission quantum yield (8.4 %) compared to previous Ir(III)-based chemo-sensors (2.5 %). The successful binding of chloride, bromide and acetate is demonstrated using emission titrations. These experiments reveal association constants of up to 1.6×105 M-1. Furthermore, a new approach to evaluate the association constant by utilizing the shift of the emission was used for the first time. The experimentally observed characteristics are supported by quantum chemical simulations.

Uranium (VI) sorption from aqueous solution using commercial anion exchange resins; kinetics, isotherm, and thermodynamic investigations

Commercial strong anion exchange resins provided by Purolite, namely MTA4801PF, and MTA4601PFSO4, were utilized for extracting uranium from sulfate leach liquor. The study focused on investigating the kinetics, isotherms, and thermodynamics of the sorption process. Both resins demonstrated similar kinetics and isotherm performance, with sorption capacities of approximately 66 and 71 mg g−1 respectively. The sorption process was proven to be endothermic, feasible, and spontaneous, and U(VI) desorption of around 95% was achieved using 0.5 M sulfuric acid. Commercial resins showed excellent sorption performance when applied to sulfate leach liquor of Egyptian ores despite the complexity of the solution.

Abstract 1839: Proteomic and glycoproteomic differences associated with prostate cancer in urine

Abstract Background and Aims: Prostate cancer is one of the most common cancers affecting men in the United States, with ~288,300 new cases and 34,700 deaths in 2023 alone. Prostate-specific antigen (PSA), the most widely used prostate cancer biomarker, lacks specificity and sensitivity, leading to unnecessary biopsies, overdiagnosis, and overtreatment. There is an urgent unmet clinical need to find new biomarkers that can distinguish patients with benign disease from those with prostate cancer. Urine is an attractive source for these biomarkers as prostate-derived proteins are more highly concentrated in urine than in blood. To better understand both global proteomic and glycoproteomic molecular signatures that could lead to improved diagnostics for prostate cancer, we analyzed urine samples from unaffected men, men with benign prostatic hyperplasia (BPH), and men with prostate cancer. Methods: Urine samples (N = 58 total) were collected from unaffected men (N = 17), men with BPH (N = 24), and men with prostate cancer (N = 17). Samples were digested with trypsin and analyzed with high-resolution liquid chromatography-tandem mass spectrometry (LC-MS/MS) for shotgun proteomics analysis. Association with cancer was determined through supervised analysis using Pearson correlation. For glycoproteomics analysis, intact glycopeptides were enriched using strong anion exchange-electrostatic repulsion hydrophilic interaction chromatography, fractionated using high pH reversed-phase chromatography, and analyzed with LC-MS/MS. Association with the three conditions was determined through several rounds of supervised analysis using Pearson correlation. Results: In total, 3542 human proteins were identified, and 78 proteins (p < 0.01) were significantly associated with prostate cancer. The glycolysis pathway and lysosome pathway were enriched in samples from men with prostate cancer. In the glycoproteomics analysis, 36 proteins (p < 0.05) had altered glycan diversity in one of the three conditions, and the complement and coagulation cascade pathway and the lysosome pathway were highly enriched. Six proteins (p < 0.05) had significantly increased glycan diversity in the cancerous samples than in the BPH and normal samples. Conclusions: This study identifies a set of interesting proteomic and glycoproteomic differences in urine from men with prostate cancer compared to BPH and non-cancer samples, which warrant further investigation in additional sample cohorts as potential novel biomarkers. Citation Format: Nikhiya Shamsher, Fernando Garcia-Marques, Abel Bermudez, Mark R. Flory, Sharon J. Pitteri. Proteomic and glycoproteomic differences associated with prostate cancer in urine [abstract]. In: Proceedings of the American Association for Cancer Research Annual Meeting 2024; Part 1 (Regular Abstracts); 2024 Apr 5-10; San Diego, CA. Philadelphia (PA): AACR; Cancer Res 2024;84(6_Suppl):Abstract nr 1839.

Efficient Recovery of Itaconic Acid Using Weak and Strong Anion Exchange Resins from Aqueous Solutions

Efficient Recovery of Itaconic Acid Using Weak and Strong Anion Exchange Resins from Aqueous Solutions

Solvent effects in anion recognition.

Anion recognition is pertinent to a range of environmental, medicinal and industrial applications. Recent progress in the field has relied on advances in synthetic host design to afford a broad range of potent recognition motifs and novel supramolecular structures capable of effective binding both in solution and at derived molecular films. However, performance in aqueous media remains a critical challenge. Understanding the effects of bulk and local solvent on anion recognition by host scaffolds is imperative if effective and selective detection in real-world media is to be viable. This Review seeks to provide a framework within which these effects can be considered both experimentally and theoretically. We highlight proposed models for solvation effects on anion binding and discuss approaches to retain strong anion binding in highly competitive (polar) solvents. The synthetic design principles for exploiting the aforementioned solvent effects are explored.

Scale-Up of the Fermentation Process for the Production and Purification of Serratiopeptidase Using Silkworm Pupae as a Substrate.

Serratiopeptidase, a bacterial metalloprotease known for its pain-relieving and anti-inflammatory properties, can be produced through fermentation with S. marcescens. This study aimed to identify key factors related to nutrient composition and physicochemical conditions for production in Erlenmeyer flasks and to scale up the mixture to a bioreactor to obtain the maximum proteolytic activity. A Plackett-Burman design was used to determine whether the presence of silkworm pupae (at 1.5%) was a significant parameter for serratiopeptidase production. Along with the variables pH, temperature, and time, they were optimized using a Taguchi experimental design, resulting in values of 7, 25 °C, and 36 h, respectively. Scaling up with a kLa of 25.45 ± 3.12 h-1 showed the highest serratiopeptidase production at 24 h. A factorial design was used for ultrafiltration, resulting in an LMH (liters per square meter per hour) of 960 L/m2h, a TMP (transmembrane pressure) of 15 psi, and a concentration factor of five, with a specific activity of 24,325.81 ± 1515.69 U/mg. Afterward, the retentate was purified using strong anion exchange chromatography and ultrafiltration, yielding a 19.94 ± 3.07% recovery and a purification factor of 1.59 ± 0.31. In conclusion, waste from the sericulture industry can be used for serratiopeptidase production.

Retention time prediction for post-translationally modified peptides: Ser, Thr, Tyr-phosphorylation

The development of a peptide retention prediction model for reversed-phase chromatography applications in proteomics is reported for peptides carrying phosphorylated Ser, Thr and Tyr-residues. The major retention features have been assessed using a collection of over 10,000 phosphorylated/non-phosphorylated peptide pairs identified in a series 1D and 2D LC-MS/MS acquisitions using formic acid as ion pairing modifier. Single modification event on average results in increased peptide retention for phosphorylation of Ser (+ 1.46), Thr (+1.33), Tyr (+0.93% acetonitrile, ACN) on gradient elution scale for Luna C18(2) stationary phase. We established several composition and sequence specific features, which drive deviations from these average values. Thus, single phosphorylation of serine results in retention shifts ranging from -2.4 to 5.5% ACN depending on position of the residue, nature of nearest neighbour residues, peptide length, hydrophobicity and pI value, and its propensity to form amphipathic helical structures. We established that the altered ion-pairing environment upon phosphorylation is detrimental for this variability. Hydrophobicity of ion-pairing modifier directly informs the magnitude of expected shifts: (most hydrophilic) 0.5 % acetic acid (larger positive shift upon phosphorylation) > 0.1 % formic acid (positive) > 0.1 % trifluoroacetic (negative) > 0.1 % heptafluorobutyric acid (larger negative shift). The effect of phosphorylation has been also evaluated for several separation conditions used in the first dimension of 2D LC applications: high pH reversed-phase (RP), hydrophilic interaction liquid chromatography (HILIC), strong cation- and strong anion exchange separations.

Specific anion effects on urease activity: A Hofmeister study

The effects of a range of electrolytes on the hydrolysis of urea by the enzyme urease is explored. The autocatalytic behavior of urease in unbuffered solutions and its pH clock reactions are studied. The concentration dependence of the experimental variables is analyzed in terms of specific ion-enzyme interactions and hydration. The results offer insights into the molecular mechanisms of the enzyme, and on the nature of its interactions with the electrolytes. We found that urease can tolerate mild electrolytes in its environment, while it is strongly inhibited by both strong kosmotropic and strong chaotropic anions. This study may cast light on an alternative therapy for Helicobacter pylori infections and contribute to the design of innovative materials and provide new approaches for the modulation of the enzymatic activity.

Novel insights into the isolation of extracellular vesicles by anion exchange chromatography.

Extracellular vesicles (EVs) are membrane structures enclosed by a lipid bilayer that are released into the extracellular space by all types of cells. EVs are involved in many physiological processes by transporting biologically active substances. Interest in EVs for diagnostic biomarker research and therapeutic drug delivery applications has increased in recent years. The realization of the full therapeutic potential of EVs is currently hampered by the lack of a suitable technology for the isolation and purification of EVs for downstream pharmaceutical applications. Anion Exchange Chromatography (AEX) is an established method in which specific charges on the AEX matrix can exploit charges on the surface of EVs and their interactions to provide a productive and scalable separation and purification method. The established AEX method using Eshmuno® Q, a strong tentacle anion exchange resin, was used to demonstrate the principal feasibility of AEX-based isolation and gain insight into isolated EV properties. Using several EV analysis techniques to provide a more detailed insight into EV populations during AEX isolation, we demonstrated that although the composition of CD9/63/81 remained constant for tetraspanin positive EVs, the size distribution and purity changed during elution. Higher salt concentrations eluted larger tetraspanin negative vesicles.

Holy Grail possibly made from clay.

The main goal of the work was to find biochemical protein markers specific for grapes and wine in ancient amphorae shards and fermentation pools. Grape-specific proteins are more reliable markers than tartaric acid and other small organic acids (tartaric acid natural source are not only grape but also apple, mango, and other plants). The Yavne winery (located in the Central District of Israel) is stated to be the largest known wine production complex from the Byzantine period (ca. 1500 years ago). The site has been excavated recently, and a number of wine jar have been recovered. We have applied our ethylene vinyl acetate (EVA) (EVA studded with strong cation and anion exchangers) diskettes to the inner surface of a number of jars, thus capturing residual grape proteins therein. Via mass spectrometry analyses, we have been able to identify four grape and three yeast proteins. This has been possible because the EVA films, applied to such surfaces, are able to harvest and concentrate any trace species, rendering them amenable to instrumental analysis. Our analysis makes it possible to propose an explanation for the Holy Grail phenomenon as a dish in which wine or water begins to smell pleasant. We attribute this to the slow release of terpenes, aldehydes, and ketones from the clay walls of pottery. After digital modeling, we identified that "scallop-shaped" niches in winery were used for the condensation of high percentage alcohol by passive evaporation from fermentation tanks.

Strong ion gap and anion gap corrected for albumin and lactate in patients with sepsis in the intensive care unit.

Metabolic acidosis is very common amongst critically ill sepsis patients partly due to the presence of unmeasured ions in serum. These ions can be detected by anion gap (AG) or strong ion gap (SIG) concentration values. The purpose of this study is to assess the correlation and potential agreement of the two methods in critically ill patients with sepsis. The present is a retrospective study including septic patients admitted to the Intensive Care Unit from December 2014 to July 2016. The [SIG] and the [AG] corrected for albumin and lactate ([AGcl]) were calculated on admission and on sepsis remission or deterioration. The correlation of the two parameters was assessed in all patient groups using the Pearson correlation coefficient and linear regression analysis and the agreement with Bland-Altman plots. ROC survival curves were also generated for the patients in relation to the values of [AGcl], [SIG] and inorganic [SIG] ([SIGi]) on admission. There was a strong correlation linking [AGcl] and [SIG] values (r>0.9, P<0.05) in all patient groups. The results from all three linear regression equations were statistically significant as the models predicted the [AGcl] value from the [SIG] value with high accuracy. The mean difference of the two methods (i.e. [AGcl] - [SIG] in every patient separately) in septic patients on admission was 11.75 mEq/l with 95% limits of agreement [9.7-13.8]; in patients with sepsis deterioration, it was 11.8 mEq/l with 95% limits of agreement [9.8-13.7] and in patients with sepsis remission, it was 11.5 mEq/l with 95% limits of agreement [10.4-12.7]. ROC survival curves demonstrated a small area under the curve (AUC): [SIG] AUC: 0.479, 95% CI [0.351, 0.606], [SIGi] AUC: 0.581, 95% CI [0.457, 0.705], [AGcl] AUC: 0.529, 95% CI [0.401, 0.656]. [AGcl] and [SIG] demonstrate excellent correlation in septic patients, with a mean difference of about 12 mEq/l. Both parameters failed to demonstrate any predictive ability regarding patient mortality.

Effective isolation of succinic acid from aqueous media with the use of anion exchange resins.

The primary objective of this study was to examine the isolation of succinic acid (SA) from aqueous-based solutions through the utilization of adsorption and ion exchange methods. Four kinds of anion exchange resins were employed, two of which were strong basic (Lewatit M-500 and Lewatit M-600), and the other two were weak basic (Lewatit MP-64 and Lewatit MP-62). The impacts of various variables on the efficiency of the process were examined. The aqueous pH strongly influenced the separation yield. Weak basic exchangers achieved the maximum yield at pH 2.1. However, the highest performance with Lewatit M-600 and Lewatit M-500 was obtained at pH 5 and 6, respectively. The SA separation with the tested resins reached equilibrium in about an hour. The recovery data revealed consistency with the Langmuir isotherm and pseudo-second-order kinetics. Efficiency improved with resin dosage and reduced with SA concentration. It was found that weak basic anion exchange resins were more efficient than strong basic exchangers for the recovery process. Among the resins tested, Lewatit MP-62 demonstrated the highest sorption capacity of 321 mg g-1 and 97.5% yield. The performance of the system decreased with temperature for all alternatives tested; however, its impact was not notable. The isolation process had an exergonic, exothermic, and favorable character based on the thermodynamic constants. Acid-loaded resins were successfully regenerated using trimethylamine and HCl for weak and strong anion exchange resins, respectively.

Unraveling hydrogen bond interactions between ketoconazole and imidazolium-based ionic liquids: An experimental and theoretical study

The solubility and solvation mechanism of the Biopharmaceutical Classification System class II insoluble drug, ketoconazole (KCZ), were investigated in eight different types of imidazolium-based ionic liquids (ILs). An in vitro cytotoxicity test was conducted on Human immortalized keratinocytes cells to evaluate the potential toxicity of these ILs. The results showed no cytotoxicity for any of the imidazolium-based ILs tested. The solubility of KCZ was then examined in the eight imidazolium-based ILs at temperatures ranging from 298.15 K to 338.15 K. The findings revealed that the solubility of KCZ followed a specific order among the imidazolium-based ILs tested. The imidazolium-based IL [BMIM][Tf2N] exhibited the highest solubility of KCZ, followed by [HMIM][PF6], [EMIM][Tf2N], [BMIM][TfO], [BMIM][PF6], [EMIM][TfO], [BMIM][BF4], and [EMIM][BF4] in decreasing order. To understand the interaction mechanism between the imidazolium-based ILs and KCZ, the cations, anions and KCZ were analyzed using σ-profiles computed from both the COSMO-RS model and quantum chemical calculations. The results indicated that KCZ had strong hydrogen bond (HB) acceptors, particularly the oxygen atom of the carbonyl group and the nitrogen atom of the imidazole ring. These HB acceptors contributed to the formation of stronger HBs with the hydrogen atoms of cations compared to the oxygen atoms of the anions. The trend of HB strength followed [Emim]+ > [Bmim]+ > [Hmim]+ > [Tf2N]− > [TfO]− > [PF6]− > [BF4]−. Based on these findings, it can be concluded that [BMIM][Tf2N], which has a strong HB donor cation and a strong HB acceptor anion, displayed the most effective dissolution of KCZ.

Silver-M-Phathalocyanine (M= Co,Fe,Cu) Electrocatalysts for Oxygen Reduction Reaction in H2/O2 Anion Exchange Membrane Fuel Cells

In the transition from fossil fuels to clean energy sources, H2 plays a key role due to its high energy density, and direct conversion to electricity in fuel cells (FCs). FCs are devices that allow the clean conversion of chemical energy into electrical energy. In H2/O2 fuel cell the hydrogen oxidation reaction (HOR) occurs at the anodic electrode, while at the cathodic side oxygen is reduced into water (ORR). The electrodes are separated by a conductive membrane, that could exchange protons (Proton Exchange Membrane, PEM) or anions (Anion Exchange Membrane, AEM) to maintain the electro-neutrality of the system. AEMFCs are an attractive alternative to PEMFCs, thanks to the alkaline noncorrosive enviroment that allows the use of cheaper structural materials such as non-noble metal electrocatalysts. This work is centred on the study of silver (Ag) nanostructured electrocatalysts in ORR for the realization of a platinum-free AEMFCs. Ag nanoparticles promote, in alkaline media, a 4e- pathway of the ORR, optimizing the conversion of oxygen into water at the expense of hydrogen peroxide.1 However, the activity of Ag is limited by the strong hydroxide anion (OH-) binding energy, which reduces the free active sites destined to oxygen adsorption.1 To overcome this, Ag electrocatalysts were modified with metal-phthalocyanines (M-Pc M=Co, Fe, Cu) and supported on Ketjen-black carbon and on Ceria/Ketjen black (CeO2/C) supports. The synergistic effect between M-Pc and Ag NPs optimizes the OH- binding energy enhancing the ORR performances.2,3 The employment of ceria, thanks to its high oxophylicity, improves the transfer of OH- to the metal surface.4,5 The dispersion and size of nanoparticles (5-15 nm) was controlled through the Turkevich synthesis method, in order to maximize the interaction between Ag and Me-Pc. Physical characterization has been realized by High Resolution Trasmission Electron Microscopy (HR-TEM), X-ray diffraction (XRD), Scanning Electron Microscopy (SEM) and X-ray photoelectron spectroscopy (XPS) while electrochemical behaviour has been explored in half cells and in complete AEMFCs. References Erikson, H., Sarapuu, A., & Tammeveski, K. (2019). Oxygen reduction reaction on silver catalysts in alkaline media: a minireview. ChemElectroChem, 6(1), 73-86.. Miller, H. A., Bevilacqua, M., Filippi, J., Lavacchi, A., Marchionni, A., Marelli, M., ... & Vizza, F. (2013). Nanostructured Fe–Ag electrocatalysts for the oxygen reduction reaction in alkaline media. Journal of Materials Chemistry A, 1(42), 13337-13347. Miller, H. A., Bellini, M., Oberhauser, W., Deng, X., Chen, H., He, Q., ... & Vizza, F. (2016). Heat treated carbon supported iron (ii) phthalocyanine oxygen reduction catalysts: elucidation of the structure–activity relationship using X-ray absorption spectroscopy. Physical Chemistry Chemical Physics, 18(48), 33142-33151. Miller, H. A., Bellini, M., Dekel, D. R., & Vizza, F. (2022). Recent developments in Pd-CeO2 nano-composite electrocatalysts for anodic reactions in anion exchange membrane fuel cells. Electrochemistry Communications, 135, 107219. Bellini, M., Pagliaro, M. V., Marchionni, A., Filippi, J., Miller, H. A., Bevilacqua, M., ... & Vizza, F. (2021). Hydrogen and chemicals from alcohols through electrochemical reforming by Pd-CeO2/C electrocatalyst. Inorganica Chimica Acta, 518, 120245. Figure 1

Highly efficient iodide adsorption from medical radioactive wastewater by strong alkaline anion exchange fiber

The conventional decay cell technology faces challenges in addressing the growing demand for medical isotopes and the increasing volume of radioactive wastewater. To overcome this, a kind of strongly alkaline anion-exchange fiber (N-AF) was employed in this study for the treatment of radioactive wastewater containing iodine, specifically from nuclear medicine applications in hospitals. A series of adsorption experiments were conducted to assess the potential of N-AF as an adsorbent for removing iodide ions. The static and dynamic adsorption capacities of N-AF for iodide ions were determined to be 347.0 and 288.4 mg g−1, respectively. Characterization techniques such as SEM/EDS, FT-IR, and XPS confirmed the successful capture of iodide ions by N-AF. Furthermore, N-AF demonstrated effective purification of radioactive wastewater containing iodine from actual nuclear medical treatment, reducing the gross-activity from 563.50 to 0.29 Bq L−1. This achievement enables the total activity of radioactive wastewater to comply with the water pollutant discharge standard for medical institutions (GB18466–2005). This outcome holds significant importance in mitigating the risk of radioactive contamination and enhancing treatment rate.

Strategy for absolute quantification of phospho‐Tau epitopes in cerebrospinal fluid by mass spectrometry

AbstractBackgroundMass spectrometry is used as reference method for protein quantification by measuring tryptic peptides derived from the target protein relative to a stable isotope‐labeled standard. Existing targeted mass spectrometric methods to measure total tau (tTau) and phosphorylated tau (pTau) species in cerebrospinal fluid (CSF) rely either on immunoaffinity enrichment of the protein or exploit the unusual property of tau being soluble in 2.5% perchloric acid (PA), to precipitate abundant sample proteins. Both strategies, however, carry risk of introducing bias: immunoaffinity enrichment relies on the specificity of the used antibodies, which may not have equal affinity for all of the large number of processed or modified forms of tau, and PA may partially precipitate some tau forms. To address this problem, we have developed an antibody‐ and PA‐free method to measure tau and pTau epitopes in CSF by targeted mass spectrometry.MethodCSF samples (100 µl) from healthy individuals (HC) and Alzheimer’s disease (AD) patients were spiked with stable isotope‐labeled tau peptide standards containing the phospho‐epitopes pTau181, pTau231, pTau217, pTau205, and non‐phosphorylated Tau212‐221, and subjected to tryptic digestion. Desalted samples were fractionated by strong anion‐ and strong cation‐ exchange (SAX and SCX, respectively) solid phase extraction with step‐wise pH elution. The fractions were analyzed by parallel reaction monitoring on a nano‐flow LC‐MS on a Quadrupole‐Orbitrap hybrid mass spectrometer.ResultSeveral tau peptides were detected with both SAX and SCX, including pTau181, pTau217, pTau205, and Tau212‐221. The reproducibility of the new assay was assessed, and its performance was compared with PA‐based sample preparation and immunoassays for tau and pTau in a pilot study of AD patients and controls.ConclusionThe method described here allows for the detection of multiple tau/pTau peptides, while avoiding the need for selective protein isolation methods such as immunoaffinity enrichment or PA precipitation, thereby eliminating bias toward more/less soluble tau species.

Adsorption of Chromium (VI) from Aqueous Solution Using Nano TiO2 Doped Strong Base Anion Exchange Resin

Background: The evolution of environmentally-safe methods for treating hazardous chemicals in wastewater, particularly urban and industrial wastewater, has increased interest over recent years. The chromium-containing wastewater is produced by industries from steel, metallurgical, electroplating, chemical, refractory, leather tanning, dye manufacturing, mining, cementing, textiles, etc. Consequently, advanced techniques are essential for treating chromium-polluted water. Objective: The prime objective of this effort was to assess the adsorption performance of nanoTiO2 (nanoparticles of average crystallite size 19.15 nm) doped strong base anion exchange resin (TDTulsion) for Cr(VI)to that of the host Tulsion A-62 (MP). Methods: The tests were carried out in batches in the temperature-controlled water bath shaking unit, with 30 ml of the aqueous solution containing Cr(VI) and a certain amount of resin being stirred for 6 hours at 303 K. Using a standard diphenylcarbazide (DPC) procedure at 540 nm, the solution was spectrophotometrically analyzed for Cr(VI). Results: The majority of the Cr(VI) ions are adsorbed by the anion exchange resins Tulsion A- 62(MP), and TD-Tulsion is in the pH range of 4.0 to 5.0. The maximal sorption capacity of Cr (VI) was established to be 181.5 and 204.8 mg/g for Tulsion A-62(MP) and TD-Tulsion, respectively. Conclusion: The TD-Tulsion has a substantially better adsorption capacity than Tulsion A-62(MP) under similar conditions. The outcomes show that modifying anion-exchange resin with nano titanium dioxide improves adsorption performance in Cr(VI) removal from drinking water and contaminated water.

Knockout of the intellectual disability-linked gene Hs6st2 in mice decreases heparan sulfate 6-O-sulfation, impairs dendritic spines of hippocampal neurons, and affects memory.

Heparan sulfate (HS) is a linear polysaccharide that plays a key role in cellular signaling networks. HS functions are regulated by its 6-O-sulfation, which is catalyzed by three HS 6-O-sulfotransferases (HS6STs). Notably, HS6ST2 is mainly expressed in the brain and HS6ST2 mutations are linked to brain disorders, but the underlying mechanisms remain poorly understood. To determine the role of Hs6st2 in the brain, we carried out a series of molecular and behavioral assessments on Hs6st2 knockout mice. We first carried out strong anion exchange-high performance liquid chromatography and found that knockout of Hs6st2 moderately decreases HS 6-O-sulfation levels in the brain. We then assessed body weights and found that Hs6st2 knockout mice exhibit increased body weight, which is associated with abnormal metabolic pathways. We also performed behavioral tests and found that Hs6st2 knockout mice showed memory deficits, which recapitulate patient clinical symptoms. To determine the molecular mechanisms underlying the memory deficits, we used RNA sequencing to examine transcriptomes in two memory-related brain regions, the hippocampus and cerebral cortex. We found that knockout of Hs6st2 impairs transcriptome in the hippocampus, but only mildly in the cerebral cortex. Furthermore, the transcriptome changes in the hippocampus are enriched in dendrite and synapse pathways. We also found that knockout of Hs6st2 decreases HS levels and impairs dendritic spines in hippocampal CA1 pyramidal neurons. Taken together, our study provides novel molecular and behavioral insights into the role of Hs6st2 in the brain, which facilitates a better understanding of HS6ST2 and HS-linked brain disorders.

Strong Base Anion Exchange Selectivity of Nine Perfluoroalkyl Chemicals Relevant to Drinking Water.

Selectivity with respect to chloride () was determined for nine drinking water relevant perfluoroalkyl and polyfluoroalkyl substances (PFAS): perfluoro-2-propoxypropanoic acid (GenX), five perfluoroalkyl carboxylic acids (PFCAs), and three perfluoroalkyl sulfonic acids (PFSAs). Three single-use strong base anion exchange gel resins were investigated, targeting drinking water relevant equilibrium PFAS liquid concentrations (≤500 ng/L). Except for the longest carbon chain PFCA (perfluorodecanoic acid) and PFSA (perfluorooctanesulfonic acid) studied, PFAS followed traditional ion exchange theory (law of mass action), including increasing equilibrium PFAS liquid concentrations with increasing equilibrium chloride liquid concentrations. Overall, values were (i) similar among resins for a given PFAS, (ii) 1-5 orders of magnitude greater than the selectivity of inorganic anions (e.g., nitrate) previously studied, (iii) 2 orders of magnitude greater for the same carbon chain length PFSA versus PFCA, (iv) found to proportionally increase with carbon chain length for both PFSAs and PFCAs, and (v) similar for GenX and perfluorohexanoic acid (six-carbon PFCA). A multisolute competition experiment demonstrated binary isotherm-determined values could be applied to simulate a multisolute system, extending work previously done with only inorganic anions to PFAS. Ultimately, estimated values allow future extension and validation of an open-source anion exchange column model to PFAS.

Excellent adsorption properties of Mg/Al/Fe LDOs for Cr(VI) in water

Cr(VI), a common wastewater pollutant discharged from metallurgical, electroplating and other industries poses a threat to human health and the ecological environment. Layered double hydroxides (LDHs), which have a strong anion exchange capacity and memory effect, are excellent adsorbents that are widely used for heavy metal adsorption. In this study, we found that Mg-Al-Fe ternary metal oxides (MAF-LDOs) obtained by the calcination of Mg-Al-Fe hydrotalcite-like compounds (MAF-LDHs) had great potential for the treatment of Cr(VI)-containing wastewater. The influences of the adsorption time, Cr(VI) concentrations, pH value and coexisting metal ions were also considered. By using batch adsorption experiments and various characterization tools, it was found that the mechanism of Cr(VI) adsorbed by MAF-LDO involved the use of a memory effect that involved HCrO4- in the reconstruction of laminates. In addition, some laminate -OH groups were protonated to electrostatically attract HCrO4-. The -OH groups in the laminate acted as electron donors to reduce Cr(VI) to Cr(III) that then underwent complexation for the effective removal of Cr(VI). The maximum theoretical adsorption capacity of MAF/LDOs for Cr(VI) was 122.85 mg/g at 20 °C. Furthermore, the MAF-LDO demonstrated excellent stability and reusability. In conclusion, the MAF-LDO exhibited a simple synthesis process, superior adsorption capacity with a short contact time, and a wide pH range of application. Hence, it is well-suited for industrial wastewater treatment and provides new insights for treating Cr(VI)-containing wastewater.