Stress-modified Fracture Strain Research Articles

파괴변형률모델에 기초한 결함이 존재하는 API X65 배관의 연성파괴 해석

A local failure criterion for the API X65 steel is applied to predict ductile failure of full-scale API X65 pipes with simulated corrosion and gouge defects under internal pressure. The local failure criterion is the stress-modified fracture strain for the API X65 steel as a function of the stress triaxiality (defined by the ratio of the hydrostatic stress to the effective stress). Based on detailed FE analyses with the proposed local failure criteria, burst pressures of defective pipes are estimated and compared with experimental data. The predicted burst pressures are in good agreement with experimental data. Noting that an assessment equation against the gouge defect is not yet available, parametric study is performed, from which a simple equation is proposed to predict burst pressure for API X65 pipes with gouge defects.

API X65 강의 연성파괴 해석을 위한 삼축응력 영향을 고려한 파괴변형률 기준 개발

This paper presents a stress-modified fracture strain for API X65 steel used for gas pipeline, as a function of stress triaxiality. To determine the stress-modified fracture strain, tension test of bars with four different notch radii, made of API X65 steel, is firstly performed, from which true fracture strains are determined as a function of notch radius. Then detailed elastic-plastic, large strain finite element (FE) analyses are performed to estimate variations of stress triaxiality in the notched bars with load. Combining experimental with FE results provides the true fracture strain as a function of stress triaxiality, which is regarded as a criterion of ductile fracture. Application of the developed stress-modified fracture strain to failure prediction of gas pipes made of API X65 steel with various types of defects is discussed.

Critical fracture stress and fracture strain models for the prediction of lower and upper shelf toughness in nuclear pressure vessel steels

Critical fracture stress and stress modified fracture strain models are utilized to describe the variation of lower and upper shelf fracture toughness with temperature and strain rate for two alloy steels used in the manufacture of nuclear pressure vessels, namely SA533B-1 (HSST Plate 02) and SA302B (Surveillance correlation heat). Both steels have been well characterized with regard to static and dynamic fracture toughness over a wide range of temperatures (−190 to 200°C), although validJIc measurements at upper shelf temperatures are still somewhat scarce. The present work utilizes simple models for the relevant fracture micromechanisms and local failure criteria to predict these variations in toughness from uniaxial tensile properties. Procedures are discussed for modelling the influence of neutron fluence on toughness in irradiated steel, and predictions are derived for the effect of increasing fluence on the variation of lower shelf fracture toughness with temperature in SA533B-1.