Stress Distribution Research Articles

Finite element analysis of proximal femur bionic nail for treating intertrochanteric fractures in osteoporotic bone.

This study compared the biomechanical characteristics of proximal femur bionic nail (PFBN) and proximal femoral nail antirotation (PFNA) in treating osteoporotic femoral intertrochanteric fractures using finite element analysis. Under similar bone density, the PFBN outperforms the PFNA in maximum femoral displacement, internal fixation displacement, stress distribution in the femoral head and internal fixation components, and femoral neck varus angle. As the bone density decreases, the PFBN's biomechanical advantages over PFNA become more pronounced. This finding suggests that the PFBN is superior for treating osteoporotic intertrochanteric femoral fractures.

Damage-Tolerant and Self-Repairing Web-Like Borate Type Binder Enable Stable Operation of Efficient Si-Based Anodes.

Novel binder designs are shown to be fruitful in improving the electrochemical performance of silicon (Si)-based anodes. However, issues with mechanical damage from dramatic volume change and poor lithium-ion (Li+) diffusion kinetics in Si-based materials still need to be addressed. Herein, an aqueous self-repairing borate-type binder (SBG) with a web-like architecture and high ionic conductivity is designed for Si and SiO electrodes. The 3D web-like architecture of the SBG binder enables uniform stress distribution, while its self-repairing ability promotes effective stress dissipation and mechanical damage repair, thereby enhancing the damage tolerance of the electrode. The tetracoordinate boron ions ( ) in the SBG binder boosts the Li transportation kinetics of Si-based electrodes. Based on dynamic covalent and ionic conductive boronic ester bonds, the diverse requirements of the binder, including uniform stress distribution, self-repairing ability, and high ionic conductivity, can be met by simple components. Consequently, the proposed straightforward multifunction design strategy for binders based on dynamic boron chemistry provides valuable insights into fabricating high-performance Si-based anodes.

Experimental investigation and simulation analysis of cast-steel joints under vertical pressure.

The joint made of cast steel is frequently utilized within a treelike column structure to ensure a smooth transition. It is of great significance in ensuring the overall structural safety, but currently, the mechanical property and bearing capacity of this type of joint cannot be fully understood. This study investigates the load characteristics of three-forked cast steel joints through concrete experiments, finite element analysis, and regression method formula derivation, filling the gap in mechanical properties and calculation formulas of forked cast steel joints. Initially, a comprehensive model of the cast-steel joint, sourced from a practical engineering, underwent vertical load testing. Detailed scrutiny of stress distribution and vertical displacement of the tested joint was conducted based on the experimental outcomes. Subsequently, a finite element model of the tested joint was constructed using SolidWorks and subjected to analysis via ANSYS. The numerical findings were juxtaposed with experimental data and extrapolated to encompass other parametric scenarios. Ultimately, a regression analysis method was employed to derive a calculation formula for the load-carrying capacity of branch-bearing cast-steel joints. The regression analysis method can accurately obtain the load-bearing capacity calculation formula for tree-shaped joint models and can be extended to determine corresponding branch and main pipe dimensions, as well as the deviation angle between branches and the main pipe, under known load conditions. This improves design efficiency and accuracy. Comparative analysis reveals a substantial concurrence among experimental, finite element analysis, and formula-based predictive outcomes. The maximum error between experimental results and those obtained from finite element analysis is 9.02%. The maximum error between the results calculated using the load-bearing capacity formula derived from regression methods and those from finite element analysis is only 1.9%.

Numerical study of pedicle screw construction and locking compression plate fixation in posterior pelvic ring injuries: Analyzed by finite element method.

The aim of this study was to compare the biomechanical performance of pedicle screw construction and locking compression plate fixation in posterior pelvic ring injuries analyzed by finite element method. A 3-dimensional finite element model of the spine-pelvis-femur complex with ligaments was reconstructed from computed tomography images. An unstable posterior pelvic ring injury was created, which was fixed with a pedicle screw construction or locking compression plate. A follower load of 400 N was applied to the upper surface of the vertebrae to simulate the upper body weight, while the ends of the proximal femurs were fixed. The construct stiffness, the maximum vertical displacement, the maximum posterior displacement, the maximum right displacement, and the overall maximum displacement of the sacrum, and stress distributions of the implants and pelvises were assessed. The construct stiffness of the pedicle screw model (435.14 N/mm) was 2 times that of the plate model (217.01 N/mm). The maximum vertical displacement, the maximum posterior displacement, the maximum right displacement, and the overall maximum displacement of the sacrum in the pedicle screw model were smaller than those in the plate model (0.919, 1.299, 0.259, and 1.413 mm in the pedicle screw model, and 1.843, 2.300, 1.053, and 2.895 mm in the plate model, respectively). The peak stresses of the implant and pelvis in the pedicle screw model decreased by 80.4% and 25% when compared with the plate model (44.57 and 34.48 MPa in the pedicle screw model, and 227.47 and 45.97 MPa in the plate model, respectively). The study suggested that the pedicle screw construction could provide better fixation stability than the locking compression plate and serves as the recommended fixation method for the treatment of posterior pelvic ring injuries.

Finite element analysis of the effect of framework material and thickness on the biomechanical performance of 'All‑on‑Four' full-arch prosthesis.

The aim of this research was to evaluate the stress distribution in the 'All-on-Four' prosthesis and the surrounding bone, with different framework materials and thicknesses. Five frameworks (alumina, zirconia, titanium, fiberglass reinforced resin (FRR), and polyether ether ketone (PEEK)) with two thicknesses (3.5 &5.5 mm) were stimulated in this research. A vertical force of 200 N was applied on a 1 mm circular area, at the cantilever, and at the region of the incisors, simulating different mastication mechanisms. The results illustrated that the 5.5 mm framework reduced the stresses on most parts, mucosa, and bone tissues, compared to 3.5 mm.

Analysis and Reflection on the Green, Low-Carbon, and Energy-Saving Design of the Super High-Rise Building

Shanghai Tower has become a new landmark of Shanghai. In the current trend advocating green building and energy efficiency, considerations of wind loads and thermal characteristics of the perimeter structure of Shanghai Tower are crucial. This paper conducts comparative simulation studies on the wind environment of Shanghai Tower using Ecotect software, and stress analyses and thermal simulations of the perimeter structure using ANSYS software. The study compared three buildings’ surface wind pressure distributions using models with equal-volume and circular cross-sections. We found that the unique exterior design of the Shanghai Tower results in a more regular and uniform distribution of wind pressure on its surface compared to both circular and square planar models, with a lower average wind pressure value. In addition, the stress analysis results indicate significant differences in deformation and stress distribution between the windward and leeward sides. Enhancing the bending moment detection of the peripheral structure and optimizing the layout of detection points are recommended. Thermal simulation results show excessive heat conduction flux in winter conditions, suggesting optimization using passive energy-saving methods such as light-sensitive thermal insulation materials during winter. This research is a reference for designing other super-tall buildings prioritizing low-carbon energy efficiency and structural safety.

Enhancing surface strength of tungsten by gradient nano-grained structure

A gradient nano-grained (GNG) structure demonstrates satisfactory surface strength. However, the underlying mechanism responsible for its strengthening lacks sufficient research. To explain how gradient nano-grained structures improve surface strength in detail, large-scale parallel molecular dynamics simulations are utilized in this study to investigate the mechanical deformation behavior of BCC tungsten with varying grain sizes during spherical nanoindentation. The findings suggest that a well-designed gradient structure can promote rational plasticity and an appropriate distribution of internal atomic stress. The critical point of maximum stress and hardness is observed when the initial grain size is 4.5 nm, with an average grain size of 7.1 nm. The interaction between grain boundary slip and migration in small grains, along with the enhanced activity of grain boundary dislocations in large grains, collectively contributes to the enhancement of the strength and hardness of the GNG structure. Compared with a homogeneous nano-grained structure, the gradient nano-grained structure exhibits a more rational distribution of dislocations and stress relaxation effects to enhance strength. The present work utilizes the molecular dynamics nanoindentation method to study GNG materials, providing a methodology for investigating the surface strengthening effects of GNG structures at the atomic scale and effectively revealing potential mechanisms for resisting surface deformation in GNG structures.

Interpretation of Frequency Effect for High-Strength Steels with Three Different Strength Levels via Crystal Plasticity Finite Element Method

The fatigue behavior of a high-strength bearing steel tempered under three different temperatures was investigated with ultrasonic frequency and conventional frequency loading. Three kinds of specimens with various yield strengths exhibited obvious higher fatigue strengths under ultrasonic frequency loading. Then, a 2D crystal plasticity finite element method was adopted to simulate the local stress distribution under different applied loads and loading frequencies. Simulations showed that the maximum residual local stress was much smaller under ultrasonic frequency loading in contrast to that under conventional frequency at the same applied load. It was also revealed that the maximum local stress increases with the applied load under both loading frequencies. The accumulated plastic strain was adopted as a fatigue indicator parameter to characterize the frequency effect, which was several orders smaller than that obtained under conventional loading frequencies when the applied load was fixed. The increment of accumulated plastic strain and the load stress amplitude exhibited a linear relationship in the double logarithmic coordinate system, and an improved fatigue life prediction model was established.

Finite Element Analysis of Anterior Implant-Supported Restorations with Different CAD-CAM Restorative Materials.

Due to the lack of literature concerning the selection of crown materials for the restoration of anterior teeth, this study aimed to investigate the effects of six distinct computer-aided design and computer-aided manufacturing (CAD-CAM) crown materials on stress and strain distribution within implant-supported maxillary central incisor restorations, employing finite element analysis (FEA). Furthermore, a comparative analysis was conducted between models that incorporated adjacent natural teeth and those that did not, intending to guide the selection of the most suitable modeling approach. Crown materials, including Lava Ultimate, Enamic, Emax CAD, Suprinity, Celtra Duo, and Cercon xt ML, were the subjects of the investigation. FEA models incorporating Coulomb friction were developed. These models were subjected to an oblique load, simulating the average maximum bite force experienced by anterior teeth. The potential for failure in titanium implant components and the prosthesis crown was evaluated through von Mises and principal stress, respectively. Furthermore, the failure of crestal bone was assessed through principal strain values. Stress values for each implant component and strain values of the bone were extracted from the models. To assess the impact of the six groups of crown materials, Kruskal-Wallis analysis of variance and post-hoc comparisons were conducted. Additionally, a statistical comparison between the two groups with Lava Ultimate and Cercon xt ML was performed using the Mann-Whitney U test to determine the difference in the two modeling approaches. Higher crown material stiffness led to decreased stress in the abutment, fixture, and retaining screw, along with reduced strain in the surrounding bone. However, the decrease in stress and strain values became less significant with increasing crown stiffness. Additionally, the model with adjacent teeth showed significantly lower stress and strain concentrations compared to the model without adjacent teeth. Crowns with a high elastic modulus were the optimal choice for anterior teeth restoration. Constructing FEA models with adjacent teeth was highly recommended to gain a deeper understanding of the mechanical behavior of dental implant restorations.

Biomechanical impact of different isthmus positions in mandibular first molar root canals: a finite element analysis.

This study used image-based finite element analysis (FEA) to assess the biomechanical changes in mandibular first molars resulting from alterations in the position of the root canal isthmus. A healthy mandibular first molar, characterized by two intact root canals and a cavity-free surface, was selected as the subject. A three-dimensional model for the molar was established using scanned images of the patient's mandibular teeth. Subsequently, four distinct finite element models were created, each representing varied root canal morphologies: non-isthmus (Group A), isthmus located at the upper 1/3 of the root (Group B), middle 1/3 of the root (Group C), and lower 1/3 of the root (Group D). A static load of 200 N was applied along the tooth's longitudinal axis on the occlusal surface to simulate regular chewing forces. The biomechanical assessment was conducted regarding the mechanical stress profile within the root dentin. The equivalent stress (Von Mises stress) was used to assess the biomechanical features of mandibular teeth under mechanical loading. In Group A (without an isthmus), the maximum stress was 22.2MPa, while experimental groups with an isthmus exhibited higher stresses, reaching up to 29.4MPa. All maximum stresses were concentrated near the apical foramen. The presence of the isthmus modified the stress distribution in the dentin wall of the tooth canal. Notably, dentin stresses at specific locations demonstrated differences: at 8mm from the root tip, Group B: 13.6MPa vs. Group A: 11.4MPa; at 3mm from the root tip, Group C: 14.2MPa vs. Group A: 4.5MPa; at 1mm from the root tip, Group D: 25.1MPa vs. Group A: 10.3MPa. The maximum stress in the root canal dentin within the isthmus region was located either at the top or bottom of the isthmus. A root canal isthmus modifies the stress profile within the dentin. The maximum stress occurs near the apical foramen and significantly increases when the isthmus is located closer to the apical foramina.

A new fatigue damage prediction model applicable to multi-slope S-N curves

The S-N curve methodology, deeply rooted in fatigue data derived from testing specimens, continues to be a prevalently utilized and foundational approach for fatigue evaluation within engineering disciplines. Nonetheless, the occurrence of fatigue limits frequently induces multi-segment patterns within S-N curves, thereby instigating discrepancies in both the slope and intercept values. This study introduces a fatigue damage prediction model tailored for multi-slope S-N curves. It employs a novel rainflow stress range distribution function, integrating two Rayleigh distributions to improve the accuracy of stress distribution moments while minimizing unknown parameters. Initially, the research delineates four bimodal power spectral density configurations and formulates a parameter search strategy for the identification of standard spectra that correspond with a wide array of bandwidth parameters. Subsequent to the parameter filtration process, a selection of 2241 standard spectra, encompassing a diverse range of bandwidth parameters, is made. Through the application of these meticulously selected standard spectra, a series of comparative analyses are executed amongst the predictive outcomes derived from the DK, ZB, JB, MN, ZL models, and the newly proposed model, across varied multi-slope S-N curves and differential fatigue limits. The insights gleaned from the relative error assessments underscore the commendable predictive precision of the novel model across multiple bandwidth processes. Notably, the model exhibits significant enhancements in predictive performance for processes delineated by a normalized spectral width parameter below 0.8.

Bone mineral density changes around the stem correlate with stress changes after total hip arthroplasty: A study using thermoelastic stress analysis.

Thermoelastic stress analysis (TSA) was used to evaluate stress changes over the entire surface of a specimen. This study aimed to assess the relationship between femoral stress distribution, analysed using TSA and changes in bone mineral density (BMD) after total hip arthroplasty (THA). Stress changes in the simulated bone before and after taper-wedge stem insertion were measured using the TSA. Stress changes were compared with BMD changes around the stem 1 year after surgery in a THA patient (58 hips) with the same taper-wedge stem. Subsequently, we compared the correlation between stress changes and BMD changes. TSA revealed significant stress changes before and after stem insertion, with prominent alterations in the proximal medial region. The BMD changes at 1 year post-THA exhibited a 15%-25% decrease in the proximal zones, while Zones 2-6 showed a -6% to 3% change. Notably, a strong positive correlation (0.886) was found between the stress change rate and BMD change rate. This study demonstrated a high correlation between femoral stress distribution assessed using TSA and subsequent BMD changes after THA. The TSA method offers the potential to predict stress distribution and BMD alterations postsurgery, aiding in implant development and clinical assessment. Combining TSA with finite element analysis could provide even more detailed insights into stress distribution. Case series (with or without comparison).

Biomechanical analysis of a new cannulated screw for unstable femoral neck fractures

BackgroundThe treatment of unstable femoral neck fractures (FNFs) remains a challenge. In this study, a new cannulated screw for unstable FNFs was designed to provide a new approach for the clinical treatment of these injuries, and its biomechanical stability was analyzed using finite element analysis and mechanical tests.MethodsAn unstable FNF model was established. An internal fixation model with parallel inverted triangular cannulated screws (CSs) and a configuration with two superior cannulated screws and one inferior new cannulated screw (NCS) were used. The biomechanical properties of the two fixation methods were compared and analyzed by using finite element analysis and mechanical tests.ResultsThe NCS model outperformed the CSs model in terms of strain and stress distribution in computer-simulated reconstruction of the inverted triangular cannulated screw fixation model for unstable FNFs. In the biomechanical test, the NCS group showed significantly smaller average femoral deformation (1.08 ± 0.15 mm vs. 1.50 ± 0.37 mm) and fracture line displacement (1.43 ± 0.30 mm vs. 2.01 ± 0.47 mm). In the NCS group, the mean stiffness was significantly higher than that in the CSs group (729.37 ± 82.20 N/mm vs. 544.83 ± 116.07 N/mm), and the mean compression distance was significantly lower than that in the CSs group (2.87 ± 0.30 mm vs. 4.04 ± 1.09 mm).ConclusionThe NCS combined with two ordinary cannulated screws in an inverted triangle structure to fix unstable FNFs can provide better biomechanical stability than CSs and exhibit a length- and angle-stable construct to prevent significant femoral neck shortening.

Toxicity, Oxidative Stress, and Tissue Distribution of Butachlor in the Juvenile Chinese Mitten Crab (Eriocheir sinensis)

The Chinese mitten crab (Eriocheir sinensis) is one of the most commercially important crustacean species in China. The aim of this study was to characterize the toxic effects of butachlor (an herbicide of the acetanilide class) on juvenile E. sinensis crabs. The lethal effects and the acute toxicity of butachlor on juvenile E. sinensis specimens were assessed through a semi-static in vitro experiment. We determined the activities of superoxide dismutase (SOD) and catalase (CAT) as well as the levels of glutathione (GSH) and malondialdehyde (MDA) in the gills and the hepatopancreas of the juvenile crabs, at different time points over a 14-day short-term exposure to butachlor. Moreover, we measured the residual levels of butachlor in three different tissues (gills, hepatopancreas, and muscles) of the juvenile crabs over a longer period. Our findings revealed that butachlor is highly toxic for juvenile E. sinensis crabs. In fact, the median lethal concentration (LC50) values of butachlor at 24, 48, 72, and 96 h were found to be 4.22, 1.84, 0.34, and 0.14 mg/L, respectively, while the safe concentration was 0.014 mg/L. The antioxidant defense ability of the juvenile E. sinensis crabs against butachlor was induced after exposure to the herbicide at a concentration of 0.01 mg/L. After 14 days of exposure to butachlor at 0.04 and 0.16 mg/L, both SOD and CAT were found to be significantly inhibited (p < 0.05), the GSH levels were found to be significantly decreased (p < 0.05) and the MDA levels were identified as significantly increased (p < 0.05). Moreover, after 14 days of exposure to butachlor at 0.16 mg/L, the activities of SOD and CAT as well as the content of GSH in the hepatopancreas were found to be significantly decreased (p < 0.05). Our results revealed that a high concentration of butachlor was capable of inducing oxidative stress and damage in juvenile E. sinensis crabs. The maximal residual value of butachlor was obtained in the gills, with a content of 4.56 μg/kg. Butachlor was not detected after 24 days in the aforementioned three tissues of the juvenile crabs, thereby indicating that it was effectively metabolized.

Experimental and Numerical Study of Membrane Residual Stress in Q690 High-Strength Steel Welded Box Section Compressed Member

High-strength steel (HSS) members with welded sections exhibit a notably lower residual compressive stress ratio compared with common mild steel (CMS) members. Despite this difference, current codes often generalize the findings from CMS members to HSS members, and the previous unified residual stress models are generally conservative. This study focuses on the membrane residual stress distribution in Q690 steel welded box sections. By leveraging experimental results, the influence of section sizes and welding parameters on membrane residual stress was delved into. A larger plate size correlates with a decrease in the residual compressive stress across the section, with a more pronounced reduction observed in adjacent plates. Additionally, augmenting the number of welding passes tends to diminish residual stresses across the section. Results showed that membrane residual stress adhered to the section’s self-equilibrium, while the self-equilibrium in the plates was not a uniform pattern. A reliable residual stress simulation method for Q690 steel welded box sections was established using a three-dimensional thermal–elastic–plastic finite element model (3DTEFEM) grounded in experimental data. This method served as the cornerstone for parameter analysis in this study and set the stage for subsequent research. As a result, an accurate unified residual stress model for Q690 steel welded box sections was derived.

Mechanical Behaviour, Contact Pose Estimation, and Finite Element Analysis of Vision Based Tactile Sensors Fabricated by Molding and Direct Ink Writing: A Comparative Study

This work pioneers the application of direct ink writing (DIW) to fabricate elastomeric additively manufactured vision based tactile sensor (VBTS). DIW cuts down the fabrication time by 76%, allowing design precise control and reducing the complexities of the process compared to the state‐of‐the‐art (SOTA) molding techniques. Successful fabrication of DIW sensor is verified in three stages. Firstly, the mechanical characteristics of the DIW sensor are at par with those of SOTA molded Ecoflex in terms of depth of compression, compression rate, and the number of cycles. Secondly, using robotic pose estimation as a demonstration, the force enables deformation in the DIW sensor shows comparable normality estimation performance to that of the SOTA Ecoflex with a mean absolute error of less than 0.6°. Thirdly, finite element analysis (FEA) of DIW and SOTA Ecoflex sensors using Yeoh model shows similar stress and strain distributions as another evidence of DIW deformability and durability signaling sensor's successful fabrication.

Analysis of cartilage loading and injury correlation in knee varus deformity.

Knee varus (KV) deformity leads to abnormal forces in the different compartments of the joint cavity and abnormal mechanical loading thus leading to knee osteoarthritis (KOA). This study used computer-aided design to create 3-dimensional simulation models of KOA with varying varus angles to analyze stress distribution within the knee joint cavity using finite element analysis for different varus KOA models and to compare intra-articular loads among these models. Additionally, we developed a cartilage loading model of static KV deformity to correlate with dynamic clinical cases of cartilage injury. Different KV angle models were accurately simulated with computer-aided design, and the KV angles were divided into (0°, 3°, 6°, 9°, 12°, 15°, and 18°) 7 knee models, and then processed with finite element software, and the Von-Mises stress distribution and peak values of the cartilage of the femoral condyles, medial tibial plateau, and lateral plateau were obtained by simulating the human body weight in axial loading while performing the static extension position. Finally, intraoperative endoscopy visualization of cartilage injuries in clinical cases corresponding to KV deformity subgroups was combined to find cartilage loading and injury correlations. With increasing varus angle, there was a significant increase in lower limb mechanical axial inward excursion and peak Von-Mises stress in the medial interstitial compartment. Analysis of patients' clinical data demonstrated a significant correlation between varus deformity angle and cartilage damage in the knee, medial plateau, and patellofemoral intercompartment. Larger varus deformity angles could be associated with higher medial cartilage stress loads and increased cartilage damage in the corresponding peak stress area. When the varus angle exceeds 6°, there is an increased risk of cartilage damage, emphasizing the importance of early surgical correction to prevent further deformity and restore knee function.

An artificial neural network model for determining stress concentration factors for fatigue design of tubular T-joint under compressive loads

PurposeThe stress concentration factor (SCF) is commonly utilized to assess the fatigue life of a tubular T-joint in offshore structures. Parametric equations derived from experimental testing and finite element analysis (FEA) are utilized to estimate the SCF efficiently. The mathematical equations provide the SCF at the crown and saddle of tubular T-joints for various load scenarios. Offshore structures are subjected to a wide range of stresses from all directions, and the hotspot stress might occur anywhere along the brace. It is critical to incorporate stress distribution since using the single-point SCF equation can lead to inaccurate hotspot stress and fatigue life estimates. As far as we know, there are no equations available to determine the SCF around the axis of the brace.Design/methodology/approachA mathematical model based on the training weights and biases of artificial neural networks (ANNs) is presented to predict SCF. 625 FEA simulations were conducted to obtain SCF data to train the ANN.FindingsUsing real data, this ANN was used to create mathematical formulas for determining the SCF. The equations can calculate the SCF with a percentage error of less than 6%.Practical implicationsEngineers in practice can use the equations to compute the hotspot stress precisely and rapidly, thereby minimizing risks linked to fatigue failure of offshore structures and assuring their longevity and reliability. Our research contributes to enhancing the safety and reliability of offshore structures by facilitating more precise assessments of stress distribution.Originality/valuePrecisely determining the SCF for the fatigue life of offshore structures reduces the potential hazards associated with fatigue failure, thereby guaranteeing their longevity and reliability. The present study offers a systematic approach for using FEA and ANN to calculate the stress distribution along the weld toe and the SCF in T-joints since ANNs are better at approximating complex phenomena than standard data fitting techniques. Once a database of parametric equations is available, it can be used to rapidly approximate the SCF, unlike experimentation, which is costly and FEA, which is time consuming.

Static and dynamic stress analysis of different crown materials on a titanium base abutment in an implant-supported single crown: a 3D finite element analysis

BackgroundThis Finite Element Analysis was conducted to analyze the biomechanical behaviors of titanium base abutments and several crown materials with respect to fatigue lifetime and stress distribution in implants and prosthetic components.MethodsFive distinct designs of implant-supported single crowns were modeled, including a polyetheretherketone (PEEK), polymer-infiltrated ceramic network, monolithic lithium disilicate, and precrystallized and crystallized zirconia-reinforced lithium silicates supported by a titanium base abutment. For the static load, a 100 N oblique load was applied to the buccal incline of the palatal cusp of the maxillary right first premolar. The dynamic load was applied in the same way as in static loading with a frequency of 1 Hz. The principal stresses in the peripheral bone as well as the von Mises stresses and fatigue strength of the implants, abutments, prosthetic screws, and crowns were assessed.ResultsAll of the models had comparable von Mises stress values from the implants and abutments, as well as comparable maximum and minimum principal stress values from the cortical and trabecular bones. The PEEK crown showed the lowest stress (46.89 MPa) in the cervical region. The prosthetic screws and implants exhibited the highest von Mises stress among the models. The lithium disilicate crown model had approximately 9.5 times more cycles to fatique values for implants and 1.7 times more cycles to fatique values for abutments than for the lowest ones.ConclusionsWith the promise of at least ten years of clinical success and favorable stress distributions in implants and prosthetic components, clinicians can suggest using an implant-supported lithium disilicate crown with a titanium base abutment.

Three-Dimensional Finite Element Modeling of Ultrasonic Vibration-Assisted Milling of the Nomex Honeycomb Structure

Machining of Nomex honeycomb composite (NHC) structures is of critical importance in manufacturing parts to the specifications required in the aerospace industry. However, the special characteristics of the Nomex honeycomb structure, including its composite nature and complex geometry, require a specific machining approach to avoid cutting defects and ensure optimal surface quality. To overcome this problem, this research suggests the adoption of RUM technology, which involves the application of ultrasonic vibrations following the axis of revolution of the UCK cutting tool. To achieve this objective, a three-dimensional finite element numerical model of Nomex honeycomb structure machining is developed with the Abaqus/Explicit software, 2017 version. Based on this model, this research examines the impact of vibration amplitude on the machinability of this kind of structure, including cutting force components, stress and strain distribution, and surface quality as well as the size of the chips. In conclusion, the results highlight that the use of ultrasonic vibrations results in an important reduction in the components of the cutting force by up to 42%, improves the quality of the surface, and decreases the size of the chips.