Abstract The susceptibility of aluminum alloy 7075 (AA7075 [UNS A97075]) to intergranular stress corrosion cracking (SCC) in the peak strength T6 temper is alleviated through the use of the T73, or over-aged temper, which provides improved SCC resistance with a 10% to 15% strength loss compared to the T6 temper. Previous research has indicated that retrogression and re-aging (RRA) heat treatments reduce the trade-off between T6 strength and T73 SCC resistance. The short-term heat treatment they used, however, limited the applicability of RRA to thin sections of material. The primary goals of this research effort were to determine if lower retrogression temperatures could be used in the RRA process to extend the applicability of this heat treatment to thick section aircraft components and to quantify any observed improvements. Alternate immersion (AI) and double-cantilever beam (DCB) tests were conducted in a 0.6-M sodium chloride (NaCl) solution to evaluate the SCC resistance of various tempers. Improveme...