AbstractSeveral efficient applications of ultrahigh‐performance fiber‐reinforced concrete (UHPFRC). Among them are UHPFRC jackets utilized for strengthening or permanent formworks of the steel reinforcing normal strength concrete (NSC) columns since UHPFRC jackets could enhance the compressive strength and other properties of the NSC column. However, the efficiency of a UHPFRC jacket simultaneously depends on its thickness and the added steel fiber volume fraction. The paper aims to explore the interaction effect of UHPFRC jacket thickness and steel fiber volume fraction on the behavior of UHPFRC jackets confining the NSC core under compressive load. The circular ultrahigh performance concrete jacket filled inside with the normal strength concrete, named NSC‐UHPFRC column specimen, is tested under loading on the NSC core. UHPFRC jacket thickness of 18‐49 mm with three adding steel fiber volume fractions was conducted for the experimental study. The investigation and analysis of the effect of the UHPFRC jacket and the steel fiber volume fraction on compression behaviors of NSC‐UHPFRC columns proceeded after the compressive strength test results were validated using Richart's model. This comprised a review of various parameters such as specimen failure pattern, stress–strain relationship, and ductile indices. The Weibull distribution was employed to explain the interaction effect on the variation in the experimental results. Finally, an interaction model was proposed and used to discuss the interaction effect of UHPFRC jacket thickness and steel fiber volume fraction and the optimum condition of the compressive strength of the NSC‐UHPFRC columns.