Streamer Blowout Coronal Mass Ejections Research Articles

Parker Solar Probe Observations of Energetic Particles in the Flank of a Coronal Mass Ejection Close to the Sun

We present an event observed by Parker Solar Probe (PSP) at ∼0.2 au on 2022 March 2 in which imaging and in situ measurements coincide. During this event, PSP passed through structures on the flank of a streamer blowout coronal mass ejection (CME) including an isolated flux tube in front of the CME, a turbulent sheath, and the CME itself. Imaging observations and in situ helicity and principal variance signatures consistently show the presence of flux ropes internal to the CME. In both the sheath and the CME interval, the distributions are more isotropic, the spectra are softer, and the abundance ratios of Fe/O and He/H are lower than those in the isolated flux tube, and yet elevated relative to typical plasma and solar energetic particle abundances. These signatures in the sheath and the CME indicate that both flare populations and those from the plasma are accelerated to form the observed energetic particle enhancements. In contrast, the isolated flux tube shows large streaming, hard spectra, and large Fe/O and He/H ratios, indicating flare sources. Energetic particle fluxes are most enhanced within the CME interval from suprathermal through energetic particle energies (∼keV to >10 MeV), indicating particle acceleration, as well as confinement local to the closed magnetic structure. The flux-rope morphology of the CME helps to enable local modulation and trapping of energetic particles, in particular along helicity channels and other plasma boundaries. Thus, the CME acts to build up energetic particle populations, allowing them to be fed into subsequent higher-energy particle acceleration throughout the inner heliosphere where a compression or shock forms on the CME front.

Magnetic flux rope structures associated with filament channels: Two case studies

We report on two case studies regarding the magnetic flux rope (MFR) structure of coronal mass ejections (CMEs) near the Sun and at 1 au. The event is a stealth streamer blow-out CME on 2011 March 25 from AR11176 showing a typical three-part bubble-like flux rope structure. No apparent eruptive signatures (e.g., two-ribbon flare, and post-eruption arcade (PEA)) were detected in the solar disk images; but a faint eruptive prominence (EP) was seen at the limb in STEREO EUV images along with a few confined flares before the eruption. The second event is a CME on 2018 August 20 originating from a quiescent filament region with clear two-ribbon flare and PEA observed; and the prolonged CME acceleration coincides with the GOES X-ray flare light curve and reconnected (RC) flux (Gopalswamy et al., 2022). In both cases, a well-defined magnetic cloud (MC) is detected at 1 au after ∼5 days. The two MCs have similar magnetic field magnitude and poloidal flux, however, the RC fluxes estimated from the associated solar source regions are significantly different. Our detailed analysis suggests the following. 1) The two events share a similar kinematic pattern consisting of a slow-rise phase and a main acceleration phase. 2) In the first case, the RC flux of the associated trigger flare at AR11176 is much smaller than the MC poloidal flux at 1au, and a significant amount of poloidal flux has been added through reconnection during the eruption. 3) Both cases show that the post-eruption flux rope has a lower twist at the core and a higher twist at the edge of the flux rope. In addition, we find that the MCs may deviate from a force-free state at the edge of flux rope. A non-force-free, varying-twist Gold-Hoyle (GH) model provides a better fit to the boundaries of the flux rope than the Lundquist (LQ) fit.

Eruption and Interplanetary Evolution of a Stealthy Streamer-Blowout CME Observed by PSP at ∼0.5 AU

Streamer-blowout coronal mass ejections (SBO-CMEs) are the dominant CME population during solar minimum. Although they are typically slow and lack clear low-coronal signatures, they can cause geomagnetic storms. With the aid of extrapolated coronal fields and remote observations of the off-limb low corona, we study the initiation of an SBO-CME preceded by consecutive CME eruptions consistent with a multi-stage sympathetic breakout scenario. From inner-heliospheric Parker Solar Probe (PSP) observations, it is evident that the SBO-CME is interacting with the heliospheric magnetic field and plasma sheet structures draped about the CME flux rope. We estimate that 18 ± 11% of the CME’s azimuthal magnetic flux has been eroded through magnetic reconnection and that this erosion began after a heliospheric distance of ∼0.35 AU from the Sun was reached. This observational study has important implications for understanding the initiation of SBO-CMEs and their interaction with the heliospheric surroundings.

On the utility of flux rope models for CME magnetic structure below 30 [formula omitted

We present a comprehensive analysis of the three-dimensional magnetic flux rope structure generated during the Lynch et al. (2019, ApJ 880:97) magnetohydrodynamic (MHD) simulation of a global-scale, 360°-wide streamer blowout coronal mass ejection (CME) eruption. We create both fixed and moving synthetic spacecraft to generate time series of the MHD variables through different regions of the flux rope CME. Our moving spacecraft trajectories are derived from the spatial coordinates of Parker Solar Probe’s past encounters 7 and 9 and future encounter 23. Each synthetic time series through the simulation flux rope ejecta is fit with three different in situ flux rope models commonly used to characterize the large-scale, coherent magnetic field rotations observed in a significant fraction of interplanetary CMEs (ICMEs). We present each of the in situ flux rope model fits to the simulation data and discuss the similarities and differences between the model fits and the MHD simulation’s flux rope spatial orientations, field strengths and rotations, expansion profiles, and magnetic flux content. We compare in situ model properties to those calculated with the MHD data for both classic bipolar and unipolar ICME flux rope configurations as well as more problematic profiles such as those with a significant radial component to the flux rope axis orientation or profiles obtained with large impact parameters. We find general agreement among the in situ flux rope fitting results for the classic profiles and much more variation among results for the problematic profiles. We also examine the force-free assumption for a subset of the flux rope models and quantify properties of the Lorentz force within MHD ejecta intervals. We conclude that the in situ flux rope models are generally a decent approximation to the field structure, but all the caveats associated with in situ flux rope models will still apply (and perhaps moreso) at distances below 30R⊙. We discuss our results in the context of future PSP observations of CMEs in the extended corona.

PSP/IS⊙IS Observation of a Solar Energetic Particle Event Associated with a Streamer Blowout Coronal Mass Ejection during Encounter 6

Abstract In this paper we examine a low-energy solar energetic particle (SEP) event observed by IS⊙IS’s Energetic Particle Instrument-Low (EPI-Lo) inside 0.18 au on 2020 September 30. This small SEP event has a very interesting time profile and ion composition. Our results show that the maximum energy and peak in intensity are observed mainly along the open radial magnetic field. The event shows velocity dispersion, and strong particle anisotropies are observed throughout the event, showing that more particles are streaming outward from the Sun. We do not see a shock in the in situ plasma or magnetic field data throughout the event. Heavy ions, such as O and Fe, were detected in addition to protons and 4He, but without significant enhancements in 3He or energetic electrons. Our analysis shows that this event is associated with a slow streamer blowout coronal mass ejection (SBO-CME), and the signatures of this small CME event are consistent with those typical of larger CME events. The time–intensity profile of this event shows that the Parker Solar Probe encountered the western flank of the SBO-CME. The anisotropic and dispersive nature of this event in a shockless local plasma gives indications that these particles are most likely accelerated remotely near the Sun by a weak shock or compression wave ahead of the SBO-CME. This event may represent direct observations of the source of the low-energy SEP seed particle population.

Modeling a Coronal Mass Ejection from an Extended Filament Channel. I. Eruption and Early Evolution

Abstract We present observations and modeling of the magnetic field configuration, morphology, and dynamics of a large-scale, high-latitude filament eruption observed by the Solar Dynamics Observatory. We analyze the 2015 July 9–10 filament eruption and the evolution of the resulting coronal mass ejection (CME) through the solar corona. The slow streamer-blowout CME leaves behind an elongated post-eruption arcade above the extended polarity inversion line that is only poorly visible in extreme ultraviolet (EUV) disk observations and does not resemble a typical bright flare-loop system. Magnetohydrodynamic (MHD) simulation results from our data-inspired modeling of this eruption compare favorably with the EUV and white-light coronagraph observations. We estimate the reconnection flux from the simulation’s flare-arcade growth and examine the magnetic-field orientation and evolution of the erupting prominence, highlighting the transition from an erupting sheared-arcade filament channel into a streamer-blowout flux-rope CME. Our results represent the first numerical modeling of a global-scale filament eruption where multiple ambiguous and complex observational signatures in EUV and white light can be fully understood and explained with the MHD simulation. In this context, our findings also suggest that the so-called stealth CME classification, as a driver of unexpected or “problem” geomagnetic storms, belongs more to a continuum of observable/nonobservable signatures than to separate or distinct eruption processes.

Evolution of a streamer-blowout CME as observed by imagers on Parker Solar Probe and the Solar Terrestrial Relations Observatory

Context. On 26–27 January 2020, the Wide-field Imager for Solar Probe on Parker Solar Probe (PSP) observed a coronal mass ejection (CME) from a distance of approximately 30 R⊙ as it passed through the instrument’s 95° field-of-view, providing an unprecedented view of the flux rope morphology of the CME’s internal structure. The same CME was seen by Solar Terrestrial Relations Observatory-Ahead (STEREO-A), beginning on 25 January. Aims. Our goal is to understand the origin and determine the trajectory of this CME. Methods. We analyzed data from three well-placed spacecrafts: PSP, STEREO-A, and Solar Dynamics Observatory (SDO). The CME trajectory was determined using a tracking-and-fitting technique and verified using simultaneous images of the CME propagation from STEREO-A. The fortuitous alignment with STEREO-A also provided views of coronal activity leading up to the eruption. Observations from SDO, in conjunction with potential magnetic field models of the corona, were used to analyze the coronal magnetic evolution for the three days leading up to the flux rope ejection from the corona on 25 January. Results. We found that the 25 January CME is likely the end result of a slow magnetic flux rope eruption that began on 23 January and was observed by STEREO-A/Extreme Ultraviolet Imager. The analysis of these observations suggest that the flux rope was apparently constrained in the corona for more than a day before its final ejection on 25 January. STEREO-A/COR2 observations of swelling and brightening of the overlying streamer for several hours prior to eruption on 25 January led us to classify this as a streamer-blowout CME. The analysis of the SDO data suggests that restructuring of the coronal magnetic fields caused by an emerging active region led to the final ejection of the flux rope.

A Model for the Coupled Eruption of a Pseudostreamer and Helmet Streamer

Abstract A highly important aspect of solar activity is the coupling between eruptions and the surrounding coronal magnetic field topology, which determines the trajectory and morphology of the event and can even lead to sympathetic eruptions from multiple sources. In this paper, we report on a numerical simulation of a new type of coupled eruption, in which a coronal jet initiated by a large pseudostreamer filament eruption triggers a streamer-blowout coronal mass ejection (CME) from the neighboring helmet streamer. Our configuration has a large opposite-polarity region positioned between the polar coronal hole and a small equatorial coronal hole, forming a pseudostreamer flanked by the coronal holes and the helmet streamer. Further out, the pseudostreamer stalk takes the shape of an extended arc in the heliosphere. We energize the system by applying photospheric shear along a section of the polarity inversion line within the pseudostreamer. The resulting sheared-arcade filament channel develops a flux rope that eventually erupts as a classic coronal-hole-type jet. However, the enhanced breakout reconnection above the channel as the jet is launched progresses into the neighboring helmet streamer, partially launching the jet along closed helmet streamer field lines and blowing out the streamer top to produce a classic bubble-like CME. This CME is strongly deflected from the jet’s initial trajectory and contains a mixture of open and closed magnetic field lines. We present the detailed dynamics of this new type of coupled eruption, its underlying mechanisms, and the implications of this work for the interpretation of in situ and remote-sensing observations.

The Solar Origin of Particle Events Measured by Parker Solar Probe

Abstract During the second solar encounter phase of Parker Solar Probe (PSP), two small solar energetic particle (SEP) events were observed by the Integrated Science Investigation of the Sun, on 2019 April 2 and 4. At the time, PSP was approaching its second perihelion at a distance of ∼24.8 million kilometers from the solar center, it was in near-radial alignment with STEREO-A and in quadrature with Earth. During the two SEP events multiple narrow ejections and a streamer-blowout coronal mass ejection (SBO-CME) originated from a solar region situated eastward of PSP. We analyze remote-sensing observations of the solar corona, and model the different eruptions and how PSP was connected magnetically to the solar atmosphere to determine the possible origin of the two SEP events. We find that the SEP event on April 2 was associated with the two homologous ejections from active region 12738 that included two surges and EUV waves occurring in quick succession. The EUV waves appear to merge and were fast enough to form a shock in the low corona. We show that the April 4 SEP event originates in the SBO-CME. Our modeling work suggests that formation of a weak shock is likely for this CME.

The Initiation of a Solar Streamer Blowout Coronal Mass Ejection Arising from the Streamer Flank

Abstract Streamer blowout (SBO) coronal mass ejections (CMEs) represent a particular class of CMEs that are characterized by a gradual swelling of the overlying streamer and a slow CME containing a flux-rope structure. SBO CMEs arising from the streamer flank fall into a special category of SBO CMEs involving three lower arches under the higher streamer arcade. However, the initiation mechanism for this special category of SBO CMEs remains elusive, due to the observational limitations. Here we report critical observations of a SBO CME associated with the eruption of a polar crown filament that originated from the streamer flank. The filament slowly rose toward the solar equator with the writhing motion, and underwent a sudden acceleration before its eruption. Interestingly, during the rising, the filament fields experienced gradual external reconnections, which is evidenced by the dip-shaped bottom of the enveloping flux-rope structure changing from a smooth concave, the slow inflows (∼1.8 km s−1) from both the filament fields and the coronal loops beneath, and the persistent brightenings around the interface between the filament fields and the coronal loops beneath. The newly formed lower loops at the filament source and the Y-shaped structure in the stretched tail fields indicate the internal reconnections for the filament eruption. The clear signatures of external and internal reconnections shed light on the initiation mechanisms of SBO CMEs.

Source and Propagation of a Streamer Blowout Coronal Mass Ejection Observed by the Parker Solar Probe

Abstract In the first orbit of the Parker Solar Probe (PSP), in situ thermal plasma and magnetic field measurements were collected as close as 35 R Sun from the Sun, an environment that had not been previously explored. During the first orbit of PSP, the spacecraft flew through a streamer blowout coronal mass ejection (SBO-CME) on 2018 November 11 at 23:50 UT as it exited the science encounter. The SBO-CME on November 11 was directed away from the Earth and was not visible by L1 or Earth-based telescopes due to this geometric configuration. However, PSP and the STEREO -A spacecraft were able to make observations of this slow (v ≈ 380 km s−1) SBO-CME. Using the PSP data, STEREO-A images, and Wang–Sheeley–Arge model, the source region of the CME is found to be a helmet streamer formed between the northern polar coronal hole and a mid-latitude coronal hole. Using the YGUAZU-A model, the propagation of the CME is traced from the source at the Sun to PSP. This model predicts the travel time of the flux rope to the PSP spacecraft as 30 hr, which is within 0.33 hr of the actual measured arrival time. The in situ Solar Wind Electrons Alphas and Protons data were examined to determine that no shock was associated with this SBO-CME. Modeling of the SBO-CME shows that no shock was present at PSP; however, at other positions along the SBO-CME front, a shock could have formed. The geometry of the event requires in situ and remote sensing observations to characterize the SBO-CME and further understand its role in space weather.

Streamer-blowout Coronal Mass Ejections: Their Properties and Relation to the Coronal Magnetic Field Structure

Abstract We present a comprehensive analysis of a particular class of coronal mass ejection (CME) event called streamer-blowout CMEs (SBOs). The events are characterized by a gradual swelling of the overlying streamer, lasting hours to days, followed by a slow, wide CME, generally exhibiting a three-part structure, which leaves the streamer significantly depleted in its wake. We identify 909 SBO events in the LASCO/C2 observations between 1996 and 2015. The average blowout lasts for 40.5 hr, but the evacuation can take days for some events. The SBO CMEs are wider and more massive than the average CME. Their properties generally vary during and between solar cycles. Their minimum (maximum) monthly occurrence rate of one (six) events in cycle 23 has doubled in cycle 24—a probable manifestation of the weaker global fields in the current cycle. The locations of SBOs follow the tilt of the global dipole (but not from 2014 onward), do not correlate with sunspot numbers, and exhibit flux rope morphology at a much higher rate (61%) than regular CMEs (40%). We propose that these characteristics are consistent with SBOs arising from extended polarity inversion lines outside active regions (e.g., quiet Sun and polar crown filaments) through the release via reconnection of magnetic energy, likely accumulated via differential rotation.

A model for stealth coronal mass ejections

AbstractStealth coronal mass ejections (CMEs) are events in which there are almost no observable signatures of the CME eruption in the low corona but often a well‐resolved slow flux rope CME observed in the coronagraph data. We present results from a three‐dimensional numerical magnetohydrodynamics (MHD) simulation of the 1–2 June 2008 slow streamer blowout CME that Robbrecht et al. (2009) called “the CME from nowhere.” We model the global coronal structure using a 1.4 MK isothermal solar wind and a low‐order potential field source surface representation of the Carrington Rotation 2070 magnetogram synoptic map. The bipolar streamer belt arcade is energized by simple shearing flows applied in the vicinity of the helmet streamer's polarity inversion line. The flows are large scale and impart a shear typical of that expected from the differential rotation. The slow expansion of the energized helmet streamer arcade results in the formation of a radial current sheet. The subsequent onset of expansion‐induced flare reconnection initiates the stealth CME while gradually releasing the stored magnetic energy. We present favorable comparisons between our simulation results and the multiviewpoint SOHO‐LASCO (Large Angle and Spectrometric Coronagraph) and STEREO‐SECCHI (Sun Earth Connection Coronal and Heliospheric Investigation) coronagraph observations of the preeruption streamer structure and the initiation and evolution of the stealth streamer blowout CME.

BREAKOUT CORONAL MASS EJECTION OR STREAMER BLOWOUT: THE BUGLE EFFECT

We present three-dimensional numerical magnetohydrodynamic (MHD) simulations of coronal mass ejections (CMEs) initiated by the breakout mechanism. The initial steady state consists of a bipolar active region embedded in the solar wind. The field orientation of the active region is opposite to that of the overarching helmet streamer, so that this pre-eruptive region consists of three arcades with a magnetic null line on the leading edge of the central arcade. By applying footpoint motion near the polarity inversion line of the central arcade, the breakout reconnection is turned on. During the eruption, the plasma in front of the breakout arcade gets swept up. The latter effect causes a pre-event swelling of the streamer. The width of the helmet streamer increases in time and follows a bugle pattern. In this paper, we will demonstrate that if this pre-event streamer swelling is insufficient, reconnection on the sides of the erupting breakout arcade/flux rope sets in. This will ultimately disconnect the helmet top, resulting in a streamer blowout CME. On the other hand, if this pre-event swelling is effective enough, the breakout reconnection will continue all the way to the top of the helmet streamer. The breakout mechanisms will then succeed in creating a breakout CME.

In/Out Pairs and the Detachment of Coronal Streamers

We previously described coronal events that originate in the 2-6 R☉ field of view of the LASCO white-light coronagraph and involve the simultaneous ejection of material inward toward the Sun and outward away from it. Now, in a study of more than 160 in/out pairs, we have found that these features are density enhancements at the leading and trailing edges of depletions that occur when slowly rising coronal structures separate from the Sun. The outward component is shaped like a large arch with both ends attached to the Sun, and the inward component is often resolved into loops. We also found about 60 additional events in which the outward components began near the edge of the occulting disk and inward components were not visible, as if these events were in/out pairs that originated below the 2 R☉ radius of the occulting disk. We conclude that in/out pairs belong to a broad class of detachments, which include streamer blowout coronal mass ejections, and we suppose that all of these events occur when rising magnetic loops reconnect to produce an outgoing helical flux rope and an ingoing arcade of collapsing loops.