Stratigraphic Logs Research Articles

The volcanic architecture and tectono-magmatic framework of the Mount Grace carbonatites, southeastern Canadian Cordillera

The Mount Grace metamorphosed carbonatites (Late Devonian) outcrop as thin (0.5–4 m), laterally discontinuous, strata-bound mappable lenses within the Monashee complex of the southeastern Canadian Cordillera. The host stratigraphic sequence (Monashee cover gneiss) was metamorphosed and deformed in the Late Cretaceous to early Eocene followed immediately by exhumation of the Frenchman Cap and Thor Odin domes. We present seven stratigraphic logs for Mount Grace carbonatites including new and previously described outcroppings spanning ∼30 km. The Mount Grace carbonatite units were deposited regionally within or near the top of a shallow marine sedimentary sequence within miogeoclinal strata of the western margin of paleo-North America (Laurentia). The distribution of the Mount Grace carbonatite lithofacies and the preserved depositional structures and textures suggest that these are pyroclastic deposits resulting from phreatomagmatic eruptions. Our new data enhance the volcanological story with an eruption scenario involving phreatomagmatic reactions and deposition from pyroclastic density currents, sourced from multiple centers within a field of monogenetic maar volcanoes. The distribution of the Mount Grace carbonatites parallel to the western margin of the paleo-North American continent correlates well with regional Late Devonian alkaline magmatism associated with development of an extensional back-arc basin.

New details on the volcanic and tectonic evolution of the Mesoarchaean Dominion Group with special reference to the Syferfontein Formation in the Ottosdal area (South Africa)

Abstract The ca. 2.96 Ga Dominion Group (DG) preserves the first subaerial volcano-sedimentary succession on the Kaapvaal Craton. Based on field and core observations, this study provides revised stratigraphic logs and geological maps from the area around Ottosdal that refine the understanding of the stratigraphic and tectonic evolution of these ancient rocks. Fluvial sandstone and conglomerate of the Rhenosterspruit Formation (RsF) were deposited on granite basement, followed by andesitic to basaltic volcanic rocks of the Rhenosterhoek Formation (RhF). These amygdaloidal andesitic to basaltic lava units show fragmentation around lava flows that may represent an indication of prevalent subaerial environment. However, local hyaloclastite and pillow lava units indicate periodic aqueous conditions. The Syferfontein Formation (SF) has the most extensive exposures in the Ottosdal area and represents the youngest volcanic unit of the DG. The porphyritic and spherulitic volcanic rocks tell a story of subaerial volcanism interspersed with periods of lacustrine deposition of sandstone and shale. The Witwatersrand Supergroup (WSG) overlies the DG along an angular unconformity. Folding affected the succession of the DG, WSG and the Ventersdorp Supergroup (Rietgat Formation). This event is reflected in small-scale folds and mullion structures in the central part of the study area and by larger scale north-northwest–south-southeast-striking anticlines and synclines. Folding was accompanied by northwest-southeast-striking thrust faulting, either during or shortly after the formation of the Ventersdorp Supergroup. In the study area, post-Ventersdorp deformation is restricted to east-northeast–west-southwest-striking faults.

ERT-based experimental integrated approach for soil hydrological characterization in rainfall-induced shallow landslides prone areas

Shallow landslides triggered by heavy rainfalls are slope instabilities, developed in the most superficial eluvial layers, involving the first 2 m from the ground level. A crucial predisposing factor in shallow landslides occurrence is the soil water content, generally measured trough sensors installed in the first soil layers. However, despite being a very precise approach, this monitoring technique provides for a site-specific dataset. An integrated method to extend the hydrological characterization from site-specific to slope scale is presented, combining geotechnical analyses, field data monitoring, and geophysical investigations, in two experimental test sites located on Italian Apennines. Ten Electrical Resistivity Tomographies (ERT) of the first soil horizons were performed through different array geometries (2D-3D-Time-Lapse), calibrated and interpreted basing on stratigraphic logs, trenches, and monitored soil water content field data. The test sites colluvial covers composition was analyzed and compared to resistivity values to build conceptual hydrogeological models of the deep-water circulation. In addition, two time-lapse (4D) ERT surveys were performed in both test sites simulating very intense precipitations, to determine the resistivity variations at different soil drainage conditions, thus estimating the average bulk permeability. Bulk permeability can be also a useful input parameter for slope stability models, widely employed in engineering practices. This integrated method proved to be very useful for the hydrogeological characterization of the subsoil at slope scale, where it is susceptible to slope instability, improving the knowledge of water circulation, as well as the bulk permeability heterogeneities, which are shallow landslides triggering parameters.

Pre-collisional architecture of the European distal margin: Inferences from the high-pressure continental units of central Corsica (France)

Abstract The Lower Units of Alpine Corsica, France, are fragments of continental crust strongly deformed and metamorphosed under high-pressure metamorphic conditions. Three slices of Lower Units are well exposed in the area between the Asco and Tavignano valleys, Central Corsica. Despite their complex structural setting, they provide the opportunity for a reconstruction of the pristine stratigraphic setting of the Lower Units. In our reconstruction, these units consist of a Paleozoic basement topped by Triassic to Early Jurassic sedimentary rocks unconformably covered by Middle to Late Eocene foredeep deposits. However, the three units exposed in the study area display strong differences mainly in the thickness of the Mesozoic sequence. These differences are here interpreted as acquired during the first stage of the rifting process in a setting controlled by normal faults. During the collision-related tectonics and the accretion of the Lower Units to the Alpine orogenic wedge, these normal faults were probably reactivated with a reverse kinematics. The stratigraphic logs of the Lower Units strictly resemble those of the Pre-Piedmont Units from Western Alps. This similarity indicates a common origin of the Lower Units and the Pre-Piedmont Units from the same domain (i.e., the European distal continental margin).

Reconstruction of Fault Architecture in the Natural Thermal Spring Area of Daruvar Hydrothermal System Using Surface Geophysical Investigations (Croatia)

The sustainable utilization of geothermal energy mostly depends on the characteristics of the geothermal resource from which it is extracted. Among others, detailed geological modeling is a key factor for estimating the potential of a geothermal resource. This research focuses on the modeling and reconstruction of the geological setting of the Daruvar thermal spring area using geophysical techniques. An integrated geophysical approach based on electrical resistivity tomography (ERT) and both active and passive seismic (MASW and HVSR) methods was used. Based on ERT results and the stratigraphic logs of the wells in Daruvar, three resistivity layers/geological units were identified. The deepest layer with resistivity < 150 Ωm is the Triassic carbonate that constitutes the thermal aquifer. Sharp lateral variations in the resistivity distributions within the bedrock were interpreted as fault damage zones saturated with thermal waters. Integrating the results of the seismic methods, the thickness of the first seismic layer that corresponds to the Quaternary cover was estimated from 5 to 20 m. Here, results of the geophysical investigations were combined into a 3D geological model highlighting the occurrence of subvertical N-S and E-W trending faults in the Daruvar spring area. The N-S-trending fault was interpreted as a fault plane parallel to the regionally mapped Daruvar fault. This fault juxtaposes the Triassic carbonate complex of the thermal aquifer with a Neogene sedimentary sequence of significantly lower permeability. Neogene–Quaternary tectonic activity further increased the fracturing and the permeability field in the Daruvar spring area, as proven by the smaller scale E-W faults and the well logs. This fracture network permits a quick upwelling of thermal fluids resulting in thermal springs with temperatures up to 50 °C. This work proves that the construction of a detailed geological model is crucial for assessing the reservoir and fault geometries in thermal systems hosted in fractured carbonate rocks.

3D Modelling of Late Quaternary coastal evolution between Albenga and Loano (Western Liguria, Italy)

ABSTRACT Seismic lines and sediment cores collected along the shelf between Albenga and Loano (Liguria, NW Italy) allowed an unprecedented reconstruction of the characters and distribution of late Quaternary transgressive littoral deposits. Multiple seismic lines datasets and stratigraphic logs were managed within a single, GIS-based software. This approach allowed the merging, analysis, and interpretation of multimethodological datasets, greatly increasing the understanding of the study area. On seismic reflection lines, the identification of high-amplitude acoustic facies (i.e. coarse-grained deposits), coupled with the analyses of the identified paleo-morphologies, allowed the mapping of (at least) five paleo shorelines along the continental shelf at 30–40 40–60, 60–80, 80–90 and 90–100 m below sea level. Their retrogradiational geometry and terraced distribution likely indicate episodic, stepwise retreats of Late Quaternary coastal system (last 18–11 Ky), compatible with phases of fast sea level rise interspersed by long periods of sea level stillstand.

Identifying Collapsible Soils from Seismic Cone (SCPT): A Qualitative Approach

Collapsible soils are unsaturated low-density soils that undergo abrupt settlement when flooded without any increase in the in-situ stress level. The first stage of the site characterization is identifying collapsible soils, since these are problematic soils. Seismic cone testing (SCPT) has been increasingly used for site characterization, because it allows combining stratigraphic logging with the maximum shear modulus (G0) determination. In this paper, laboratory and in-situ tests carried out at 21 sites with collapsible and non-collapsible soils are interpreted to differentiate between such soils, based on the seismic cone test (SCPT). Collapsible soils have G0/qc values greater than 23 and qc1 values less than 70, while non-collapsible soils have G0/qc values less than 23 and qc1 values greater than 70. The investigated collapsible soils have microstructure (bonding/cementation), but the classical approach cannot be sufficient to identify collapsible soils alone. An approach was used to identify collapsible soils based on maximum shear modulus (G0), normalized cone resistance (qc1), and cone resistance (qc). The chart G0/qc versus qc1 and boundaries is an alternative for distinguishing between collapsible and non-collapsible soils in the early stage of site investigation. This qualitative approach should be used in the preliminary investigation phase to select potentially collapsible soils and helps guide the sampling of potentially collapsible soils for laboratory testing. Further SCPT data from different soil types, particularly the collapsible ones, are valuable to adjust or confirm the boundary equations suggested.

Stratigraphic change in flow transformation processes recorded in early post‐rift deep‐marine intraslope lobe complexes

AbstractThe Early Jurassic Los Molles Formation in the Neuquén Basin of western Argentina is a rare example of well‐exposed syn‐rift to post‐rift stratigraphy. In the Chachil Graben, the onset of the early post‐rift stage is marked by drowning of a carbonate system and the development of two deep‐marine intraslope lobe complexes. This field‐based study in the Chachil Graben involved field mapping and correlating eleven stratigraphic logs, and petrographic analysis to document how grain size and texture within intraslope lobe sandstones change from the lobe centre to their frontal pinch‐out. Eight different bed‐scale facies are identified and inferred to be formed by turbulent (turbidites; Type A and B beds), transient turbulent–laminar (transitional flow deposits; Type C, D, E and F beds), laminar gravity flows (debrites; Type G) and post‐depositional clastic injections (injectites; Type H beds). Fifteen lobes form two stacked lobe complexes that show stratigraphic evolution from a lower argillaceous sandstone‐dominated lobe complex, built by transitional flow deposits, to an upper coarser‐grained, sandier lobe complex largely constructed by turbidites. Petrographic analysis quantified sandstone mineralogy, matrix content, grain size and sorting, revealing that both lobe complexes are volcanic arc‐sourced. This study proposes that the differences in the character of the two lobe complexes are due to maturation of sediment transport routes through progressive healing of the intraslope relief, with a concomitant decrease in substrate erosion and flow bulking. Also proposed here is a model for intraslope lobe complex development that accounts for the impact of flow‐confinement on flow behaviour and transformation induced by the inherited topography. Bed type distribution suggests that high‐density flows terminate more abruptly against confining slopes and produce greater depositional variability than lower‐density flows. This integrated petrographic, architectural and sedimentary process model provides new insights into how post‐rift intraslope lobe systems may act as hydrocarbon reservoirs, aquifers and carbon storage sites.

Paleogene evolution of the External Rif Zone (Morocco) and comparison with other western Tethyan margins

The Paleogene evolution of the NW margin of the African Plate (Western External Rif Zone) was studied by means of multidisciplinary analyses of twenty-one stratigraphic logs, including tectofacies recognition, petro-mineralogical results, and thicknesses analysis. Four stratigraphic intervals were recognized separated by three unconformities coarsely aligned with the Cretaceous–Paleogene, Eocene–Oligocene and Oligocene–Miocene boundaries, respectively. Tectofacies appear from the late Ypresian being more frequents from the Oligocene as the tectonic activity increases. The petrology of detrital suites indicates recycled orogen-derived sediments, with quartz supplied from metamorphic rocks of the Atlas orogen and/or the African craton. On the basis of Mesozoic clay mineral assemblages reported in the literature, the clay mineralogy of mudstones suggests upper Jurassic to upper Cretaceous terrains from the Internal Intrarif as the main source area of the Paleocene–Eocene successions, with sediment provenance reversion during the Oligocene and additional contribution of Paleocene to lower Eocene suites. The different displacement capability of the identified aluminic-magnesic clay mineralogy enabled to deduce the relative proximity of the source area. These findings point out a complex sedimentary evolution characterized by a mixture of different lithotypes dating back to upper Jurassic. X-ray parameters helped to identify evidences of synsedimentary tectonics overprinting the inherited mineralogy during some periods with weak burial diagenesis at most. During the Paleogene a foreland basin is formed mainly in the Mesorif and Prerif sub-domains. This foredeep was represented by two ‘sub-geosynclines’ separated by a relative bulge located in the External Mesorif. The Internal Intrarif could represent the relative orogenic front, advancing on the External Intrarif. The Eocene forebulge was located in the Ridges Domain, while the Gharb Basin was the backbulge of the system. During the Oligocene the depocentral area migrated southward and a homogeneization of thicknesses took also place in the whole margin. In this new configuration, the foredeep would be located in the External Mesorif (previously a relative bulge) while the Ridges Domain and the Gharb Basin continued to act as the system forebulge and backbulge, respectively. A comparison with the Paleogene evolution of other western Tethys external margins (Betic Chain, Tunisian Tell, Sicilian Maghrebids, and Apennines) has revealed more similarities than differences. The effects of the Eo-Alpine tectonics are recognized everywhere even if they decrease both from N to S, and from W to E in the different considered margins. The evolution of the compared margins shows a common pre-foredeed (Paleocene-Eocene) and beginning of foredeep (Oligocene) stages in the foreland basins.

Multimethod provenance analysis using detrital zircon and rutile U-Pb geochronology across Devonian basin systems in the Tasmanides of eastern Australia

The Devonian represents a period of transition for the accretionary orogens of the Australian Tasmanides where the largest and inboard Thomson Orogen became stabilised and orogenic processes became focused in the outboard and newly developing New England Orogen. The end of tectonic activity in the Thomson and the adjacent Delamerian and Lachlan orogens culminated with the development of several overlying intracratonic sedimentary basins. We examine the two largest cover basins, the Adavale and Darling, using stratigraphic logging, sandstone petrography, detrital zircon and rutile U-Pb geochronology to fingerprint sediment sources to test whether the basins were once connected and part of a much larger cover basin system. Sediment provenance in the Adavale Basin is characterised by (i) continuous input from a basement-derived Ordovician (∼480 Ma) igneous zircon source, (ii) reworking of metasedimentary basement rocks with a ‘Pacific-Gondwana’ age signature (iii) reworking of detrital rutile from Cambro-Ordovician sedimentary rocks in the Thomson Orogen ultimately sourced from the Musgrave Block and (iv) an addition of syn-depositional volcanic zircon from contemporary volcanism between ∼380 and 360 Ma. Sediment provenance of the Darling Basin is dominated by reworking of (meta)sedimentary basement, evident from large proportions of rounded zircons exhibiting a ‘Pacific-Gondwana’ age signature and detrital rutile with Peterman Orogeny ages. A much less significant age population of syn-depositional volcanic detrital zircons suggests input from contemporary volcanic sources which were more distal and extra-basinal.The comparison of sandstone compositions and detrital age information indicate both basins record similar provenance signals in terms of reworking of their respective hinterlands and receiving contributions from relatively distal syn-depositional volcanism. However, the comparison of sediment provenance proxies, suggests that the Adavale and Darling basins were not connected during the Devonian and that the basins are intracratonic or cover basins, recording the stabilisation of the Thomson and Lachlan orogens, respectively.

Burial stylolites enhance karst dissolution and control cave geometry in heterolithic carbonates, Salitre Formation, Brazil

Understanding the karstification process in fractured carbonates is a key factor in developing and exploiting fractured and karstified reservoirs. This study documents the relationship among the 2D geometry, stratigraphy and petrophysical properties of a cave system developed in a Neoproterozoic mixed carbonate-siliciclastic sequence. We applied a multidisciplinary and multiscale approach that combined structural geological surveys, cave imaging by Laser Detecting and Ranging (LiDAR), linear scanlines, stratigraphic logs, uniaxial compressive strength (UCS), mercury-intrusion porosimetry, and 2D image analysis. We found that bedding-parallel stylolites in dolomitic limestone consist of mm-to cm-thick high-porosity zones (up to 20% measured via 2D image analysis). They acted as fluid conduits that enhanced bedding-parallel dissolution. Field and thin section analyses showed that beds with close spacing and thicker stylolites are more karstified and dissolved than beds showing greater spacing or completely devoid of stylolites, indicating that stylolitic zones act as flow pathways in low porosity-permeability carbonates. Primary porosity, pore size distribution, density and capillary pressure of host rocks have no direct relationship with karstification intensity. We conclude that clusters of burial stylolites may control the hypogenic cave geometry. These findings have direct implications for subsurface permeability prediction in karstified carbonate reservoirs.

Hydrogeological parameterization of the landslide of Lamosano, (Eastern Italian Alps)

The area of the village of Lamosano, in the province of Belluno (North-East Italy), has been critically affected for several decades by a landslide that has caused significant damages to buildings and infrastructures. This instability process, involving almost the whole village, is set in a 30-meter thin layer of Quaternary deposits and marls. Groundwater flow within these deposits has been identified as one of the primary causes of the slope movement.With the purpose of identifying fundamental and useful parameters for the intelligent design of landslide countermeasures, a series of geological and hydrogeological investigations have been carried out.Through the analysis of 18 stratigraphic logs, a geological model for the subsoil was provided.The hydrogeological characterization concerned the realization of slug tests and point dilution tests to properly estimate the hydraulic conductivity (K) and the groundwater flow velocity (vd), respectively. Both investigations have been conducted on the five piezometers available in the study area. A satisfactory agreement has been detected between the K values and vd.The data provided in this study can be used as a basis for the efficient implementation of a coupled hydrogeological-mechanical model, which would considerably contribute to the mitigation of the landslide risk.

Evolution of a single incised valley related to inherited geology, sea level rise and climate changes during the Holocene (Tirso river, Sardinia, western Mediterranean Sea)

We performed a morpho-stratigraphic study of the Tirso River incised valley (Sardinia Island, western Mediterranean Sea), an erosional feature crossing the Sinis fault, a major normal fault bordering the Campidano basin between the Gulf of Oristano and the western Sardinia shelf. High-resolution seismic reflection profiles and multibeam echosounder data, integrated by age-constrained stratigraphic logs derived from 9 sediment cores enabled us to reconstruct the valley evolution during the Holocene. We found that the Tirso valley is the result of a single event of incision and infill during the last eustatic cycle, strongly controlled by the presence of the Sinis fault. In fact, this structure represents a geological threshold that marks an abrupt change in substrate lithology and seabed slope, which controlled the valley morphology, narrow when downcutting early Pliocene formations along the steeper open shelf, and wider inside the Gulf, in the Pleistocene alluvial deposits of the flatter Gulf of Oristano. The sedimentary record starts with alluvial sediments filling the valley along the shelf during the initial phase of sea level rise, i.e., over 10 ka. During the last ~9.0 ka, a bay head delta developed, with the formation of barriers at the gulf entrance. In the mid-late Holocene, the progressive sea-level rise led to rapid drowning of the barrier system, recorded by marine and estuarine sediments filling the valley. Analysis of ecological associations in the cores, collected along a valley-normal transect, allowed for a detailed reconstruction of the paleo-environmental conditions during the latest phase of the incised valley filling controlled by global climatic variations in the Mediterranean region between ~9.0 and ~ 4.5 ka. Together with eustasy, our work reveals that the evolution and sedimentary infill of the Tirso incised valley was strongly controlled by inherited geological constraints, which influenced the morphology of the valley and the stratigraphic pattern.

Environmental reconstruction potentials of Loess-Paleosol-Sequences in Kashmir through high-resolution proxy data

Loess Paleosol Sequences (LPS) are valuable archives of climatic and environmental change in terrestrial systems and contribute to local and global dust systems. Due to their widespread occurrence across continents, LPS are well suited to study the interface of climate subsystems, on different time scales. Yet, high-resolution investigations of LPS have been mainly performed in Europe, East Asia and North America. In contrast, other loess-covered areas are less intensively studied, and low sampling resolution often limits the assessment of the full potential of these paleo-environmental archives. This is particularly true for LPS in the Kashmir region, where competing monsoonal- and continental climate subsystems in Southern Asia interact. In this study, we test the potential of the Wanihama LPS in the northern fringe of the Kashmir Valley to reflect climatic- and paleo-environmental variability between- and within stratigraphic units. For this, we present the stratigraphic log of the section and contribute a high-resolution (2 cm interval) dataset comprising rock-magnetic parameters, grain size- and colorimetric data for the Wanihama LPS in Kashmir. Overall, our multi-proxy-study supports the stratigraphy to different degrees. Classic climate-driven magnetic enhancement in paleosols is evident, despite possible waterlogging effects through monsoonal influences. Our results highlight the potential of LPS in Kashmir and illustrate the need for reliably dated logs with proxy data in a high resolution, to i) validate the LPS in the context of paleo-environmental and climatic studies, and to ii) establish a correlative framework for LPS across Kashmir and beyond. Once high-resolution proxy data are available for long and continuous LPS in Kashmir, we will be able to gain a better understanding of interactions between climate sub-systems in the context of oscillating supra-regional climate systems in Southern Asia.

Proterozoic-Mesozoic development of the Quanji block from northern Tibet and the cratonic assembly of eastern Asia

Unraveling the timing, location, and mechanisms of cratonic aggregation in Earth9s continental jigsaw puzzle is a key factor for plate tectonic reconstructions. The Quanji Block (QB) is a sliver of anomalously old and well-preserved continental crust embedded within the Paleozoic-Mesozoic tectonic collage of the northeastern Tibetan Plateau and has played a critical role in Proto-/Paleotethys paleogeographic reconstructions. New geological mapping, stratigraphic logging, and geochronological analysis lead to a refined understanding of QB9s history from Paleoproterozoic to present. Deposited atop a largely Paleoproterozoic basement, the Quanji Group records rifting and epicratonic cover at 1.7 to 1.6 Ga. The Quanji Group is unconformably overlain by the Xiaogaolu Group, which preserves black shale, Ediacaran-type <i>Charnia</i>, ribbon-shaped fossils and a late Ediacaran glaciation. U-Pb detrital zircon ages from Cambrian Olongbuluke Group marine platform deposits are quite different from ages in underlying units, with a minor component of Neoproterozoic (880–815 Ma) ages. The apparent change in detrital zircon sources coincides with a regionally expressed Great Unconformity during the Precambrian–Cambrian transition. The new stratigraphy and U-Pb geochronology of QB suggest that the late Paleoproterozoic to Cambrian history of QB has a remarkable similarity to that of the southern margin of North China Block (NCB), indicating that the QB has been displaced dextrally from an initial location adjacent to NCB. The transform motion occurred in stages between <i>ca.</i> 350 and 200 Ma, which suggests that transform tectonism appears to be an essential element of any viable model for kinematic development of the Paleo-Tethyan oceanic domains and the ultimate cratonic assembly of eastern Asia.

Late Cenozoic Extensional Formation of the Antofalla Depression, Southern Puna Plateau, Argentina: An Effect of Lithospheric Foundering?

AbstractDeformation within orogenic plateaus functions to establish a dynamic equilibrium between tectonic boundary stresses and plateau gravitational potential energy. Temporal changes in deformation kinematics record perturbations to boundary stresses or internal plateau processes, such as lithospheric foundering. We integrate new mapping, field observations, and geochronologic ages with published data to document complex late Cenozoic upper crustal deformation in the region of the Antofalla depression, a ∼125 km long, sublinear basin within the southern Puna orogenic plateau, Argentina. The juxtaposition of stratal ages across the depression requires &gt;900 m vertical offset on a surface‐breaking fault. Regional geologic structure, basin geomorphology, and our observation of a breccia paralleling the depression margin suggest formation of the depression by normal faulting. We interpret published stratigraphic logs to suggest that the depression formed between ca. 16 and 11 Ma following Andean shortening. Folded Late Miocene to Quaternary strata on the eastern depression margin indicate that extension ended and shortening resumed before present, revealing toggling between extensional and contractional kinematic regimes. The kinematic evolution of the Antofalla depression contrasts with the rest of the southern Puna plateau, which underwent shortening until latest Miocene to Quaternary time, followed by extension and strike‐slip deformation. Taken together, the spatial and temporal variations in late Cenozoic deformation of the southern Puna plateau are inconsistent with mechanisms that would affect the entire orogen, such as slowing convergence, but are compatible with lithospheric foundering.

Resedimented limestones in fault-controlled basins (Zorzino Limestone, Southern Alps, Norian, Italy): Facies types and depositional model

The Norian succession of the Southern Alps of Italy stores thick successions of resedimented basinal carbonates (Zorzino Limestone) that were deposited in fault-controlled, anoxic, intraplatform basins developed within a vast inner platform domain (Dolomia Principale). To characterise the basinal facies, to define their distribution within these basins and to identify depositional processes, four stratigraphic logs covering about 2000 m of total stratigraphic thickness from proximal to distal basinal settings were described bed by bed. Eight different lithofacies organised in 11 bed types were identified according to sedimentary structures, texture, and composition: each bed (about 4500 beds in total) was measured individually at cm scale and classified in one of the 11 bed types.Distribution of bed types in terms of events (i.e. number of beds) and cumulative thickness (i.e. volume of sediments produced by the different depositional processes) in the four selected logs change from the proximal to the distal parts of the basin, reflecting the existence of diverse dominant depositional processes at different places within the intraplatform basins. Bed by bed analyses of thick stratigraphic logs provide important hints about the distribution of different types of depositional processes, from proximal to distal basin. Frequent slump folds and mass flow deposits, with clasts mostly deriving from the slope facies itself, indicate instability of the slope. Sediment composition and facies types document a major role played by the reworking of primary deposits formed along the slope: basinal facies mostly consist of resedimented slope deposits, produced by sliding of sediments, rich in lime mud, accumulated along the slope and low-angle proximal basin, whose instability (likely enhanced by seismic activity related to the Norian extensional tectonics) produced most of the recognised facies types. The two-step depositional processes as well as the facies associations and bed types clearly indicate a different behaviour (in terms of prevailing depositional processes and facies associations) of the studied resedimented limestone with respect to siliciclastic deposits.The distribution of facies and the detailed analyses of bed types, recording the distribution of depositional processes at basinal scale, provide a tool for the interpretation of basin morphology, from the study of stratigraphic logs, that can be applied both to outcrop and to subsurface successions.

Late Paleozoic glacial to postglacial stratigraphic evolution of the Rio do Sul depocenter, Itararé and Guatá groups, Pennsylvanian-Cisuralian, southern Brazil

The transition from the Late Paleozoic Ice Age (LPIA) to fully postglacial conditions in SW Gondwana is under increasing discussion due to either the radiometric ages of its boundary or the stratigraphic nature of this transition. The record of this transition in the Paraná Basin is found in the glacial and glacially influenced deposits of the upper Mafra and Rio do Sul Formations (upper Itararé Group) and postglacial strata of the Rio Bonito Formation (Guatá Group). Here we address the depositional architecture and stratigraphic evolution of these deposits in the Rio do Sul depocenter, eastern Paraná Basin, Brazil, the main area of subsidence in the basin during this transition in Pennsylvanian-Cisuralian time, bringing an opportunity to examine the characteristics of glacial to postglacial transition. Analyses of facies, stratigraphic logs, stratigraphic correlations, and paleocurrent dispersal trends allowed us to define three evolutionary stages. The first stage registers glacial advance from the south-southwest represented by an erosive surface and subglacial tillites. Gravitational deposits covered the tillites in response to ice retreat (upper Mafra Formation), and the Lontras Shales (lower Rio do Sul Formation) correspond to the marine maximum flooding. The second stage comprises co-genetic deepwater (Rio do Sul Formation) to shallow (Rio Bonito Formation, Triunfo Member) progradational deposits after the Lontras Shale maximum flooding. Paleocurrent data and glacially related features point to glaciated source areas located to the NE, E, and SE for the Rio do Sul depocenter during this stage. The third stage corresponds to retrogradational stacking pattern upon a fluvial subaerial unconformity (incised valley), starting with fluvio-deltaic beds (Triunfo Member), followed by fine-grained deposits of the Paraguaçu Member of Rio Bonito Formation. No features related to glacial influence characterize this third stage. As previously suggested, tectonic uplift likely drove the additional NE source and created the space that allowed the transitional contact between Rio do Sul and Rio Bonito formations in the Rio do Sul depocenter.

The Stratigraphic Log drawing using GeoMS Software, Case Study: Semilir Formation, Ngoro-oro Area, Bantul, Yogyakarta

The stratigraphic log is the standard method used to display the vertical succession of rock layers from oldest to youngest. Stratigraphic sections can be constructed based on field data and drilling data. There are two stages when using field data to create a stratigraphic cross-section. The first stage is data correction and the second stage is stratigraphic log depiction. Data correction is done manually using trigonometric empirical formulas and the drawing was done using graphic software such as CorelDraw. These stages of course needs more time and effort. GeoMS is a simple software that was designed and built for drawing sedimentary and stratigraphic logs. The software focus on field data processing, although it can use core data or well logs, so the user can choose the data source correctly. The aim of using GeoMS is to simplify and speed up work with precise and detailed results so that it is more efficient and accurate. The research is explain the new technique of stratigraphic log drawing simpler with any type of data. Beside that, the result is still have an accuracy and detail as good as manually drawn. The stratigraphic log of Semilir Formation in the Ngoro-oro area was successfully drawn using GeoMS. The results of the stratigraphic logs are more detailed and precise due to computational work. However, additional columns such as lithological composition, fossil, facies, noted, photos, etc have been another advantages .GeoMS was proven to provide maximum results in a faster time.

Subsurface Geological Characterization of the Late Neogene–Quaternary Argive Basin, Peloponnese, Greece Using Transient Electromagnetic Data and Vintage Stratigraphic Logs

The onshore and offshore clastic deposits of the Argive Basin and the Argolic Gulf, respectively, in Peloponnese, Greece, form a Late Neogene–Quaternary half-graben that connects with the Aegean Sea. The onshore Late Neogene–Quaternary sequence, comprised of chaotically intercalated cohesive and granular clastic deposits, is in angular unconformity with bedrock comprised of Triassic–Upper Cretaceous strongly-weathered, highly-fractured karstic limestones thrusted against Paleogene flysch deposits. While the surface geology of the Argive Basin is well-known, the subsurface geology remains both poorly mapped and understood. We utilized transient electromagnetic (TEM) soundings coupled with 185 vintage stratigraphic logs, current surface geology knowledge, and insights from available geophysical surveys to characterize the subsurface conditions of this sedimentary basin. We estimated the thickness of the young deposits (the depth to bedrock) and detected potential subsurface tectonic structures. The TEM-FAST 48HPC data acquisition system with integrated inversion and visualization software package was used with a single-loop dimension of 50 m × 50 m to collect a total of 329 TEM soundings at 151 stations scattered throughout the basin. The TEM station spacing varied from 200 to 750 m allowing the mapping of 80 km2. The total depth of investigation with the inverted TEM data and the lithology logs was 130 m and 183 m, respectively. The joint interpretation produced several quasi-two-dimensional electrical resistivity profiles that traverse the sedimentary basin in various azimuths and depth slices of average electrical resistivity covering the basin. The depth slices and the vintage stratigraphic logs revealed an uneven bedrock topography overlain by an irregularly thick (over 180 m) Late Neogene–Quaternary heterolithic sediment cover.