Strategy For Synthesis Research Articles

Improved Operation of Chloralkaline Reversible Cells with Mixed Metal Oxide Electrodes Made Using Microwaves.

This study focuses on the synthesis of mixed metal oxide anodes (MMOs) with the composition Ti/RuO2Sb2O4Ptx (where x = 0, 5, 10 mol) using hybrid microwave irradiation heating. The synthesized electrodes were characterized using scanning electron microscopy, X-ray energy-dispersive analysis, X-ray diffraction, cyclic voltammetry, and electrochemical impedance spectroscopy. These electrodes were then evaluated in both bulk electrolytic and fuel cell tests within a reversible chloralkaline electrochemical cell. The configurations using the electrodes Ti/(RuO2)0.7-(Sb2O4)0.3 and Ti/(RuO2)66.5-(Sb2O4)28.5-Pt5 presented lower onset potential for oxygen and chlorine evolution reactions and reduced resistance to charge transfer compared to the Ti/(RuO2)63-(Sb2O4)27-Pt10 variant. These electrodes demonstrated notable performance in reversible electrochemical cells, achieving Coulombic efficiencies of up to 60% when operating in the electrolytic mode at current densities of 150 mA cm-2. They also reached maximum power densities of 1.2 mW cm-2 in the fuel cell. In both scenarios, the presence of platinum in the MMO coating positively influenced the process. Furthermore, a significant challenge encountered was crossover through the membranes, primarily associated with gaseous Cl2. This study advances our understanding of reversible electrochemical cells and presents possibilities for further exploration and refinement. It demonstrated that the synergy of innovative electrode synthesis strategies and electrochemical engineering can lead to promising and sustainable technologies for energy conversion.

Modernizations of graphene nanocomposites using synthesis strategies—State-of-the-art

Graphene has been ranked among one of the most remarkable nanostructure of the carbon world. Graphene modification and nanocomposite formation have been used to expand the practical potential of graphene nanostructure. The overview is an effort to highpoint the indispensable synthesis strategies towards the formation of graphene nanocomposites. Consequently, graphene has been combined with useful matrices (thermoplastic, conducting, or others) to attain the desired end material. Common fabrication approaches like in-situ method, solution processing, and melt extrusion have been widely involved to form the graphene nanocomposites. Moreover, advanced sophisticated methods such as three or four dimensional printing, electrospinning, and others have been used to synthesize the graphene nanocomposites. Focus of all synthesis strategies has remained with the standardized graphene dispersion, physical properties, and applications. However, continuous future efforts are required to resolve the challenges in synthesis strategies and optimization of the parameters behind each technique. As the graphene nanocomposite design and properties directly depend upon the fabrication techniques used, there is obvious need for the development of advanced methods having better control over process parameters. Here, main challenging factors may involve the precise parameter control of the advanced techniques used for graphene nanocomposite manufacturing. Hence, there is not only need of current and future research to resolve the field challenges related to material fabrication but also reporting compiled review articles can be useful for interested field researchers towards challenge solving and future developments in graphene manufacturing.

Modernizations of graphene nanocomposites using synthesis strategies—State-of-the-art

Graphene has been ranked among one of the most remarkable nanostructure of the carbon world. Graphene modification and nanocomposite formation have been used to expand the practical potential of graphene nanostructure. The overview is an effort to highpoint the indispensable synthesis strategies towards the formation of graphene nanocomposites. Consequently, graphene has been combined with useful matrices (thermoplastic, conducting, or others) to attain the desired end material. Common fabrication approaches like in-situ method, solution processing, and melt extrusion have been widely involved to form the graphene nanocomposites. Moreover, advanced sophisticated methods such as three or four dimensional printing, electrospinning, and others have been used to synthesize the graphene nanocomposites. Focus of all synthesis strategies has remained with the standardized graphene dispersion, physical properties, and applications. However, continuous future efforts are required to resolve the challenges in synthesis strategies and optimization of the parameters behind each technique. As the graphene nanocomposite design and properties directly depend upon the fabrication techniques used, there is obvious need for the development of advanced methods having better control over process parameters. Here, main challenging factors may involve the precise parameter control of the advanced techniques used for graphene nanocomposite manufacturing. Hence, there is not only need of current and future research to resolve the field challenges related to material fabrication but also reporting compiled review articles can be useful for interested field researchers towards challenge solving and future developments in graphene manufacturing.

Synthesis Strategies, Preparation Methods, and Applications of Chiral Metal-Organic Frameworks.

Chiral metal-organic framework (CMOFs) is a kind of material with great application value in recent years. Formed by the coordination of metal ions or metal clusters with organic ligands. It is widely used in chemistry, biology, medicine and materials science because of its ordered and adjustable pores, multi-dimensional network structure, large specific surface area and excellent adsorption properties. In this paper, the synthesis strategies and preparation methods of chiral metal-organic frameworks are reviewed. In addition, the applications of chiral metal-organic framework materials in enantiomer recognition and separation, circularly polarized luminescence and asymmetric catalysis are systematically summarized. Finally, the challenges and prospects of the development of chiral metal-organic frame materials are analyzed in detail.

Preparation of nanodiamonds modified hard carbon with uniform spherical feature for improving sodium-ion storage performances

Sodium-ion batteries (SIBs) have received remarkable attention due to their abundant sodium (Na) content and low resources cost. However, the absence of high-performance anode materials make carbon-based SIBs still a challenge. Herein, nano-diamonds (NDs) modified gleditsia japonica shell carbon to form a uniform carbon microsphere, which improves the graphitization degree and Na ion adsorption, NDs also act as a strong scaffold to maintain its stability. This spherical carbon-based material exhibits superior performances including the enhanced capacity (270 mA h g−1 at 0.2C after 100 cycles) and long-cycle stability (155 mA h g−1 at 2C after 1000 cycles) when incorporated into SIBs. This work provides a green and simple synthesis strategy for fabricating high performance porous spherical carbon used for SIBs anode.

Application of machine learning in the study of cobalt-based oxide catalysts for antibiotic degradation: An innovative reverse synthesis strategy

This study addresses antibiotic pollution in global water bodies by integrating machine learning and optimization algorithms to develop a novel reverse synthesis strategy for inorganic catalysts. We meticulously analyzed data from 96 studies, ensuring quality through preprocessing steps. Employing the AdaBoost model, we achieved 90.57% accuracy in classification and an R²value of 0.93 in regression, showcasing strong predictive power. A key innovation is the Sparrow Search Algorithm (SSA), which optimizes catalyst selection and experimental setup tailored to specific antibiotics. Empirical experiments validated SSA's efficacy, with degradation rates of 94% for Levofloxacin and 97% for Norfloxacin, aligning closely with predictions within a 2% margin of error. This research advances theoretical understanding and offers practical applications in material science and environmental engineering, significantly enhancing catalyst design efficiency and accuracy through the fusion of advanced machine learning techniques and optimization algorithms.

Steering the Selective Production of Glycolic Acid by Electrocatalytic Oxidation of Ethylene Glycol with Nanoengineered PdBi-Based Heterodimers.

Heterodimers of metal nanocrystals (NCs) with tailored elemental distribution have emerged as promising candidates in the field of electrocatalysis, owing to their unique structures featuring heterogeneous interfaces with distinct components. Despite this, the rational synthesis of heterodimer NCs with similar elemental composition remains a formidable challenge, and their impact on electrocatalysis has remained largely elusive. In this study, Pd@Bi-PdBi heterodimer NCs are synthesized through an underpotential deposition (UPD)-directed growth pathway. In this pathway, the UPD of Bi promotes a Volmer-Weber growth mode, allowing for judicious modulation of core-satellite to heterodimer structures through careful control of supersaturation and growth kinetics. Significantly, the heterodimer NCs are employed in the electrocatalytic process of ethylene glycol (EG) with high activity and selectivity. Compared with pristine Pd octahedra and common PdBi alloy NC, the unique heterodimer structure of the Pd@Bi-PdBi heterodimer NCs endows them with the highest electrocatalytic performance of EG and the best selectivity (≈93%) in oxidizing EG to glycolic acid (GA). Taken together, this work not only heralds a new strategy for UPD-directed synthesis of bimetallic NCs, but also provides a new design paradigm for steering the selectivity of electrocatalysts.

Continuous and Scalable Synthesis of Prussian Blue Analogues with Tunable Structure and Composition in Surfactant-Free Microreactor for Stable Zinc-Ion Storage.

We represent a segmented flow surfactant-free microfluidic strategy for continuous synthesis of Prussian blue analogues (PBAs) with high dispersity and high crystallization. Representative zinc hexacyanoferrate (ZnHCF) nanocubes were successfully synthesized in a microfluidic reactor within a few minutes via the cooperation method and possessed lower contents of crystal water and Fe(CN)63- vacancies than that of synthesis in bulk solution. The nucleation and particle growth process can be precisely controlled by the exploration of different flow rates and reaction temperatures during the formation of ZnHCF nanocubes in segmented flow microfluidic reactors. High crystallinity, low crystal water and vacancies in the ZnHCF structure were presented at relatively high temperatures for the crystal growth process. High-quality ZnHCF with a low content of crystal water showed excellent electrochemical activity and stability towards zinc-ion storage. The continuous and scalable synthesis approach can be extended to the fabrication of other PBAs such as NiHCF, CoHCF, MnHCF, and CuHCF with high dispersity without using any surfactants. The controllable construction of PBAs with tunable properties in microfluidic reactors provides a promising direction to minimize the gap between commercial reality and laboratory research.

Donor Preactivation-Based Glycan Assembly: from Manual to Automated Synthesis.

ConspectusCarbohydrates are called the third chain of life. Carbohydrates participate in many important biochemical functions in living species, and the biological information carried by them is several orders of magnitude larger than that of nucleic acids and proteins. However, due to the intrinsic complexity and heterogeneity of carbohydrate structures, furnishing pure and structurally well-defined glycans for functional studies is a formidable task, especially for homogeneous large-size glycans. To address this issue, we have developed a donor preactivation-based one-pot glycosylation strategy enabling multiple sequential glycosylations in a single reaction vessel.The donor preactivation-based one-pot glycosylation refers to the strategy in which the glycosyl donor is activated in the absence of a glycosyl acceptor to generate a reactive intermediate. Subsequently, the glycosyl acceptor with the same anomeric leaving group is added, leading to a glycosyl coupling reaction, which is then iterated to rapidly achieve the desired glycan in the same reactor. The advantages of this strategy include the following: (1) unique chemoselectivity is obtained after preactivation; (2) it is independent of the reactivity of glycosyl donors; (3) multiple-step glycosylations are enabled without the need for intermediate purification; (4) only stoichiometric building blocks are required without complex protecting group manipulations. Using this protocol, a range of glycans including tumor-associated carbohydrate antigens, various glycosaminoglycans, complex N-glycans, and diverse bacterial glycans have been synthesized manually. Gratifyingly, the synthesis of mycobacterial arabinogalactan containing 92 monosaccharide units has been achieved, which created a precedent in the field of polysaccharide synthesis. Recently, the synthesis of a highly branched arabinogalactan from traditional Chinese medicine featuring 140 monosaccharide units has been also accomplished to evaluate its anti-pancreatic-cancer activity. In the spirit of green and sustainable chemistry, this strategy can also be applied to light-driven glycosylation reactions, where either UV or visible light can be used for the activation of glycosyl donors.Automated synthesis is an advanced approach to the construction of complex glycans. Based on the two preactivation modes (general promoter activation mode and light-induced activation mode), a universal and highly efficient automated solution-phase synthesizer was further developed to drive glycan assembly from manual to automated synthesis. Using this synthesizer, a library of oligosaccharides covering various glycoforms and glycosidic linkages was assembled rapidly, either in a general promoter-activation mode or in a light-induced-activation mode. The automated synthesis of a fully protected fondaparinux pentasaccharide was realized on a gram scale. Furthermore, the automated synthesis of large-size polysaccharides was performed, allowing the assembly of arabinans up to an astonishing 1080-mer using the automated multiplicative synthesis strategy, taking glycan synthesis to a new height far beyond the synthesis of nucleic acids (up to 200-mer) and proteins (up to 472-mer).

Enabling Logistics Automation in Nanofactory: Cobalt Phosphide Embedded Metal-Organic Frameworks for Efficient Electrocatalytic Nitrate Reduction to Ammonia.

Electrocatalytic nitrate reduction reaction (NitRR) in neutral condition offers a promising strategy for green ammonia synthesis and wastewater treatment, the rational design of electrocatalysts is the cornerstone. Inspired by modern factory design where both machines and logistics matter for manufacturing, it is reported that cobalt phosphide (CoP) nanoparticles embedded in zinc-based zeolite imidazole frameworks (Zn-ZIF) function as a nanofactory with high performance. By selective phosphorization of ZnCo bimetallic zeolite imidazole framework (ZnCo-ZIF), the generated CoP nanoparticles act as "machines" (active sites) for molecular manufacturing (NO3 - to NH4 + conversion). The purposely retained framework (Zn-ZIFs) with positive charge promotes logistics automation, i.e., the automatic delivery of NO3 - reactants and timely discharge of NH4 + products in-and-out the nanofactory due to electrostatic interaction. Moreover, the interaction between Zn-ZIF and CoP modulates the Co sites into electron insufficient state with upshifted d-band center, facilitating the reduction/hydrogenation of NO3 - to ammonia and restricting the competitive hydrogen evolution. Consequently, the assembled CoP/Zn-ZIF nanofactory exhibits superior NitRR performances with a high Faraday efficiency of ≈97% and a high ammonia yield of 0.89mmol cm-1 h-1 in neutral condition, among the best of reported electrocatalysts. The work provides new insights into the design principles of efficient NitRR electrocatalysts.

Protein Engineering of a Novel β-Galactosidase from Thermus scotoductus for Efficient Synthesis of Lacto-N-Neotetraose from Chitin Powder.

A novel β-galactosidase (TsGal48) from Thermus scotoductus was cloned, and the enzyme was biochemically characterized. TsGal48 catalyzed the synthesis of lacto-N-neotetraose (LNnT) from lactose via the transglycosylation reaction with a maximal yield of 20%, which is the highest yield for the synthesis of LNnT so far. To further improve the yield of LNnT, TsGal48 was successfully engineered by directed evolution and site-saturation mutagenesis. A mutated β-galactosidase (mTsGal48) was selected and characterized. mTsGal48 produced LNnT with a yield of 27.7 g/L, which is 1.4-fold higher than that of TsGal48 (19.7 g/L). Then, a developed strategy for LNnT synthesis from chitin powder was provided in a 30 L bioreactor. The reaction process included chitin powder hydrolysis, lacto-N-triose II (LNT2) synthesis, and LNnT synthesis. The reaction time was reduced from 44 to 17 h in chitin powder hydrolysis and LNT2 synthesis. The content of LNnT was up to 25 g/L in the multienzyme system. The green and efficient route may be suitable for large-scale production of LNnT from chitin powder.

Optimization of Desalination Efficiency and Exploratory Applications of TiO2 Active Site Electrode Enhanced by Activated Carbon and Tween 80 in Capacitive Deionization Technology.

Capacitive deionization (CDI) is an emerging desalination technology for seawater desalination. The development of high-desalination and long-life electrode materials is a research focus in the global water treatment field. In this experiment, Tween T80 was used as a surface activator, and a modified electrode was prepared by facilitating the deposition of TiO2 active sites onto the surface of activated carbon through a sol-gel/hydrothermal two-step synthesis strategy. The morphology and specific surface area of the composite material were analyzed through scanning electron microscopy, specific surface area measurements, and contact angle tests. The results indicated that the sol-gel/hydrothermal two-step synthesis strategy played a crucial role in the homogeneous combination and performance enhancement of the composite material. Under constant voltage mode, when the working voltage was 1.2 V, the desalination capacity of this composite material in a NaCl solution with an initial conductivity of 3000 μS·cm-1 reached 23.8 mg·g-1 (26% higher than materials prepared by conventional sol-gel methods). After 150 cycles, the capacity retention rate was 78%, and the retention capacity was significant (87%). Overall, the results demonstrate the potential of the sol-gel/hydrothermal two-step synthesis strategy in preparing high-performance CDI electrode materials. The modified electrode prepared using this method offers enhanced desalination capacity and durability, making it a promising candidate for seawater desalination and other water treatment applications.

Unlocking Heavy Metal Remediation Potential: A Review of Cellulose–Silica Composites

This comprehensive review explores recent advancements in heavy metal remediation techniques, focusing on the utilization of cellulose–silica composites and tailored surface modification techniques. We examine the synthesis strategies and properties of cellulose–silica adsorbents, highlighting their enhanced adsorption capacities and structural robustness for removing heavy metal pollutants from aqueous environments. The review investigates various surface modification approaches, including thiol functionalization, amino acid grafting, and silane coupling agents, for optimizing the surface chemistry and morphology of cellulose–silica composites. Mechanistic insights into the adsorption processes and kinetics of modified adsorbents are discussed, along with considerations for optimizing adsorption performance under different environmental conditions. This review provides valuable perspectives on the development of effective adsorbent materials for sustainable heavy metal remediation applications.

Synthesis of Spiro Polycyclic N-Heterocycles and Indolecarbazoles via Merging Oxidative Coupling and Cascade Palladium-Catalyzed Intramolecular Oxidative Cyclization.

We report a step-economic strategy for the direct synthesis of spiro polycyclic N-heterocycles and indolecarbazole-fused naphthoquinones by merging oxidative coupling and cascade palladium-catalyzed intramolecular oxidative cyclization. In the protocol, bi-indolylnaphthoquinones were first synthesized by oxidative coupling of indoles and naphthoquinones. Subsequent cascade palladium-catalyzed intramolecular oxidative cyclization of bi-indolylnaphthoquinones gave spiro polycyclic N-heterocycles and indolecarbazoles. The intramolecular oxidative cyclization approach could also be realized by the presence or absence of iron catalysts under standard conditions. This protocol is featured with moderate to excellent yields, a wide substrate scope, and divergent structures of products.

Strategies for the efficient biosynthesis of β-carotene through microbial fermentation.

β-Carotene is an orange fat-soluble compound, which has been widely used in fields such as food, medicine and cosmetics owing to its anticancer, antioxidant and cardiovascular disease prevention properties. Currently, natural β-carotene is mainly extracted from plants and algae, which cannot meet the growing market demand, while chemical synthesis of β-carotene cannot satisfy the pursuit for natural products of consumers. The β-carotene production through microbial fermentation has become a promising alternative owing to its high efficiency and environmental friendliness. With the rapid development of synthetic biology and in-depth study on the synthesis pathway of β-carotene, microbial fermentation has shown promising applications in the β-carotene synthesis. Accordingly, this review aims to summarize the research progress and strategies of natural carotenoid producing strain and metabolic engineering strategies in the heterologous synthesis of β-carotene by engineered microorganisms. Moreover, it also summarizes the adoption of inexpensive carbon sources to synthesize β-carotene as well as proposes new strategies that can further improve the β-carotene production.

Real‐time dielectric monitoring of isothermal polymerization of methyl cyanoacetate and diethylene glycol dimethacrylate

AbstractDielectric spectroscopy (DS) was employed to monitor the isothermal polymerization processes of P(MCA‐DEGDMA) formed by the alternating copolymerization of methyl cyanoacetate (MCA) and diethylene glycol dimethacrylate (DEGDMA) at different temperatures in real time. P(MCA‐DEGDMA) is a polyether containing functional groups (O, CN, COOCH3) which can promote the transport of ions Li+, thereby having the potential to apply in polymer electrolytes. It is beneficial to investigate the effect of temperature and time on P(MCA‐DEGDMA) polymerization and choose a suitable synthesis strategy through dielectric monitoring. A time‐ and temperature‐dependent relaxation process induced by orientational polarization of the P(MCA‐DEGDMA) chain was observed over a frequency range from 10 kHz to 4 × 106 Hz. The time to reach polymerization equilibrium (tequ) and the dielectric conversion were determined through the time variations of the conductivity at low frequency (κl). The polymerization process shows the characteristic of “fast followed by slow,” and the tequ can be advanced by raising the polymerization temperature. In addition, by discussing the monitoring time dependence of relaxation time (τ) and permittivity (ε), it was concluded that the extent of polymerization (α) for P(MCA‐DEGDMA) at 40°C is the largest, and the optimal polymerization temperature is between 30 and 50°C. Furthermore, the free activation energy (ΔG), activation enthalpy (ΔH), and activation entropy (ΔS) of the relaxation process caused by the motion of the P(MCA‐DEGDMA) chain in three temperature ranges (10–20°C, 30–40°C, 50–60°C) were calculated by using Eyring's equation, from which the physical image of various structures and conformations of the P(MCA‐DEGDMA) chain during monitoring was proposed. Considering the effect of temperature on the generation and migration of free ions, and on the structure and conformation of the P(MCA‐DEGDMA) chain, some suggestions for the synthesis of P(MCA‐DEGDMA) are given: during the polymerization, the temperature is controlled at 10°C in the early stage and then gradually raised to 40°C, which may be beneficial to improving the extent of polymerization of P(MCA‐DEGDMA). Our work may be helpful to investigate the polymerization process of polyether obeying the same synthesis mechanism with P(MCA‐DEGDMA). It can be proven that DS is useful in detecting the inner information of the system changing over time through our work.

Alternative strategies for the recombinant synthesis, DOPA modification and analysis of mussel foot proteins – A case study for Mefp-3 from Mytilus edulis

Mussel foot proteins (Mfps) possess unique binding properties to various surfaces due to the presence of L-3,4-dihydroxyphenylalanine (DOPA). Mytilus edulis foot protein-3 (Mefp-3) is one of several proteins in the byssal adhesive plaque. Its localization at the plaque-substrate interface approved that Mefp-3 plays a key role in adhesion. Therefore, the protein is suitable for the development of innovative bio-based binders. However, recombinant Mfp-3s are mainly purified from inclusion bodies under denaturing conditions. Here, we describe a robust and reproducible protocol for obtaining soluble and tag-free Mefp-3 using the SUMO-fusion technology. Additionally, a microbial tyrosinase from Verrucomicrobium spinosum was used for the in vitro hydroxylation of peptide-bound tyrosines in Mefp-3 for the first time. The highly hydroxylated Mefp-3, confirmed by MALDI-TOF-MS, exhibited excellent adhesive properties comparable to a commercial glue. These results demonstrate a concerted and simplified high yield production process for recombinant soluble and tag-free Mfp3-based proteins with on demand DOPA modification.

Chemical inertness conversion of carbon fraction in coal gangue via N-doping for efficient benzo(a)pyrene degradation

Efficient degradation of organic pollutants in complex media via advanced oxidation processes (AOPs) is still critical and challenging. Herein, nitrogen (N)-doped coal gangue (CG) catalysts (N-CG) with economic competitiveness and environmental friendliness were successfully synthesized to activate peroxymonosulfate (PMS), exhibiting ultrafast degradation performance toward benzo(a)pyrene (BaP) with 100.00 % and 93.21 % in contaminated solution and soil under optimized condition, respectively. In addition, 0.4 N-CG possessed excellent reusability toward BaP degradation with over 80.00 % after five cycles. However, BaP removal efficiency was significantly affected by some co-existing anions (HCO3− and SO42−) and humic acid (HA) in solution and soil, as well as inhibited under alkaline conditions, especially pH ≥ 9. According to the characterizations, N-doping could promote the generation of pyridinic N and graphitic N in N-CG via high-temperature calcination, which was conducive to produce hydroxyl radical (•OH), sulfate radical (SO4•−), superoxide radical (•O2−) and single oxygen (1O2). In 0.4 N-CG/PMS system, 1O2 and •O2− were proved to be the predominant reactive oxygen species (ROSs) in BaP degradation, as well as •OH and SO4•− made certain contributions. To sum up, this work provided a promising strategy for synthesis of CG-based catalysts by chemical inertness conversion of carbon fracture via N-doping for PMS activation and opened a novel perspective for environmental remediation of hydrophobic and hydrophilic contaminants pollution.

Bottom-Up Construction of Rhombic Lamellar CoNi-MOFs for the Electrochemical Sensing of H2S.

Lamellar metal-organic frameworks (MOFs) have attracted significant attention in the field of electrochemical sensing due to their abundant open active sites and specific electron conductivity. Herein, by employing a bottom-up synthesis strategy, rhombic lamellar heterometallic CoNi-MOFs with varying thicknesses are constructed. This is achieved by using 4-methylpyridine as a capping agent based on the (4,6)-linked Co2(azpy)2(bptc) (azpy = 4,4'-azopyridine, bptc = 3,3',5,5'-biphenyltetracarboxylic acid) structure with a fsc topology and by introducing Ni species simultaneously. To mitigate sulfur deposition on electrodes, the triple pulse amperometry (TPA) method is employed. Among the synthesized lamellar CoNi-MOFs, lamellar CoNi-MOF-3 with the minimum thickness exhibits an optimal electrochemical sensing performance toward hydrogen sulfide, with a sensitivity of 119.3 μA·mM-1·cm-2 in the linear range of 2-2000 μM. This study pioneers a new approach to the controlled construction and electrochemical activity modification of lamellar MOF materials.

Development of a Strategy for the Total Synthesis of Aspidosperma Alkaloids via the Cyclobutenone-Based PET-Initiated Cationic Radical-Driven [2+2]/Retro-Mannich Reaction.

A novel strategy for the synthesis of Aspidosperma alkaloids has been achieved via a photoredox-initiated [2+2]/retro-Mannich reaction of tryptamine-substituted enaminones as a key step. The developed chemistry has been applied to the construction of the core tetracycle of Aspidosperma alkaloids (±)-aspidospermidine and (±)-limaspermidine.