Strain Rate Research Articles

The relationship between crustal deformation characteristics and strong earthquakes in western China revealed by GNSS.

To clarify the relationship between GNSS (Global Navigation Satellite System) crustal deformation and the preparation of strong earthquakes in the western Chinese Mainland, a series of methods including velocity field, strain rate field, and strain parameter time series are adopted based on the GNSS observation data from the CMONOC (Crustal Movement Observation Network of China). The abnormal characteristics of crustal deformation movement before the M ≥ 5 earthquakes in the area since 1999 are studied. The corresponding variety of the crustal movement before earthquakes is discussed in combination with the seismogenic structure of earthquakes. The abnormalities of the GNSS velocity field, strain field, and strain parameter time series before earthquakes with different magnitudes are proposed. Finally, the anomaly criterion before medium-strong-large earthquakes in the western Chinese Mainland is proposed according to the GNSS and its combination with the characteristics of geological structure. The results can provide a basis for the forecasting of the trend and location of medium-strong-large earthquakes in the western Chinese Mainland.

Bending Strength of Glass Materials under Strong Dynamic Impact and Its Strain Rate Effects

Bending Strength of Glass Materials under Strong Dynamic Impact and Its Strain Rate Effects

Time-dependent deformation behaviours of two stainless steels at elevated temperature: Correlation between slow strain rate and creep testing

Time-dependent deformation behaviours of two stainless steels at elevated temperature: Correlation between slow strain rate and creep testing

Effects of Exercise Interventions on Cardiac Structure, Function, and Mechanics in Individuals with Chronic Motor-Complete Spinal Cord Injury: An Exploratory Randomized Clinical Trial

Background: Individuals with spinal cord injury (SCI) at or above T6 face increased cardiovascular disease (CVD) risks due to altered autonomic control and physical inactivity. Arm cycle ergometry training (ACET) or body weight-supported treadmill training (BWSTT) may improve cardiovascular health, but the impact on cardiac structure and function remains unclear. Objectives: The study aimed to compare the impact of two exercise interventions on cardiac measures in individuals with chronic SCI. Methods: Participants with motor-complete SCI (C4-T6, American Spinal Injury Association Impairment Scale [AIS] grade A or B) were randomly assigned to perform 72 ACET or BWSTT sessions. Left ventricular (LV) echocardiography assessments were performed pre and post training. Data were analyzed using a two-way repeated measures analysis of variance and effect sizes (Cohen’s d). Results: Twelve participants underwent analysis (6 per group), revealing significant Group (ACET, BWSTT) x Time (pre, post) interactions for global circumferential systolic and diastolic strain rate (SR) and early diastolic filling velocity (p ≤ .018; Cohen’s d > .8/ -.8). Within-group post hoc testing demonstrated a significant decrease in global circumferential systolic SR (p < .001, d = -4.00) and a significant increase in global circumferential diastolic SR (p = .025, d = 2.48) following ACET, with no significant differences following BWSTT. Although there were no statistically significant within-group post hoc changes (p > .58) for diastolic filling, there was a large effect size favoring ACET (d = 1.11). Conclusion: This exploratory study suggests that ACET alters LV mechanics and potentially diastolic function in a cohort of individuals with chronic, cervical or upper thoracic, motor-complete SCI. Conversely, no significant changes were observed following BWSTT. These findings indicate that ACET can improve cardiac function relative to BWSTT in individuals with SCI, though further studies are warranted.

Effect of annealing and strain rate on the microstructure and mechanical properties of austenitic stainless steel 316L manufactured by selective laser melting

Effect of annealing and strain rate on the microstructure and mechanical properties of austenitic stainless steel 316L manufactured by selective laser melting

Temperature anisotropy instabilities driven by intermittent velocity shears in the solar wind

Where and under what conditions the transfer of energy between electromagnetic fields and particles takes place in the solar wind remains an open question. We investigate the conditions that promote the growth of kinetic instabilities predicted by linear theory to infer how turbulence and temperature-anisotropy-driven instabilities are interrelated. Using a large dataset from Solar Orbiter, we introduce the radial rate of strain, a novel measure computed from single-spacecraft data, which we interpret as a proxy for the double-adiabatic strain rate. The solar wind exhibits high absolute values of the radial rate of strain at locations with large temperature anisotropy. We measure the kurtosis and skewness of the radial rate of strain from the statistical moments to show that it is non-Gaussian for unstable intervals and increasingly intermittent at smaller scales with a power-law scaling. We conclude that the velocity field fluctuations in the solar wind contribute to the presence of temperature anisotropy sufficient to create potentially unstable conditions.

Comparison of inelasticity creep failure evaluation codes for elevated-temperature non-nuclear pressure equipment

PurposeTo ensure the reliable and safe operation of elevated-temperature pipes and equipment in the long term, it is essential to thoroughly assess the creep rupture life. Nevertheless, there is currently no design code that specifies a creep rupture life evaluation method for non-nuclear elevated-temperature equipment. The paper aims to discuss this issue.Design/methodology/approachAn analysis was conducted to compare the differences and conservativeness in calculating creep strain using three major codes (ASME-CC-2843, API-579 and BS-7910) based on the results of the 316H creep constitutive model and creep strain prediction. In addition, the creep resistances of 316H, 304H and 347H were compared. Subsequently, the ANSYS Usercreep subroutine was developed to compare the discrepancies between different codes under multiaxial stress conditions using numerical simulations.FindingsBS-7910 employs the Norton creep model with calculation parameters for the average creep strain rate, which is not applicable for the engineering design stage. ASME-CC2843 code primarily focuses on the primary and secondary creep stages, making it more suitable for non-nuclear pipeline and equipment design. For 316H, the creep strain curves predicted by ASME-CC2843 and API-579 typically intersect at a specific point. By combining the creep strain predicted by ASME-CC2843 and API-579, 347H exhibits superior predicted creep resistance compared to 316H, whereas 316H exhibited better predicted creep resistance than 304H.Originality/valueThis study provides a guide for future evaluation methods and material choices for non-nuclear equipment and pipelines operating at elevated temperatures.

Axial mechanical properties of welded orthogonal trapezoidal aluminum honeycomb as filler material for nuclear equipment impact limiter.

Lightweight porous structural materials have excellent energy absorption performance, and their application are gradually appeared. This paper takes the shock-absorbing material of nuclear equipment transportation casks as the starting point, and manufactures an orthogonal trapezoidal aluminum honeycomb by welding (WOTAH). The mechanical properties with different cell thicknesses and cell size ratios under different impact loads are studied through experimental and simulation methods, and the deformation process and energy absorption performance of the materials are obtained. The energy absorption performance of materials under quasi-static loading was investigated using plastic deformation theory and compared with experimental results. Based on the experimental results, the least squares method was used for data fitting to obtain the C-S dynamic constitutive relationship of the material. The equivalent structure was used to replace the honeycomb structure for simulation, and the influence of strain rate effect and structural size on material properties was further studied. Through the above mechanical performance analysis and comparison with wood, it is shown that WOTHA has feasible for the application of nuclear equipment impact limiter.

Normalization of hot deformation parameters for activation energy analysis in metallic alloys

Abstract Depending on melting point of a given alloy, the temperature range for
hot deformation of alloys varies widely. Consequently, the apparent activation energy
of hot deformation, Q, is greatly influenced by the temperature range as well as strain
rate applied during hot deformation. The purpose of this investigation is to normalize
hot deformation parameters – temperature and strain rate – to study their effects on
activation energy. Seventy published hot-deformation data sets were used to investigate
the effects of normalized hot-deformation variables on Arrhenius-type constitutive
model parameters. Flow stress, strain rate, and temperature from sample datasets
were normalized to the range [0, 1] and fitted with an Arrhenius-type model. The
results showed that, for normalized parameters, the activation energy has exponential
relationships with a partial derivative of flow stress with strain rate and temperature.

Effect of Annealing Time on Grain Structure Evolution and Superplastic Response of Al-Mg 5xxx Alloys

The impact of annealing on the recrystallized grain structure and superplastic behavior of two Al-Mg 5xxx alloys used for high-speed blow forming (HSBF) was studied. The results revealed that both alloys demonstrated rapid static recrystallization after only a few minutes of annealing at 520 °C, forming fine and equiaxed grain structures. After four min of annealing, Alloy 2 (Al-4.0Mg-1.18Mn) exhibited a higher fraction of small grains (<10 µm) compared to Alloy 1 (Al-4.5Mg-0.74Mn). Moreover, Alloy 2 displayed enhanced resistance to grain coarsening with increasing annealing times, which was attributed to its higher amount of Al6(Mn,Fe) intermetallic particles and a higher number density of Mn dispersoids. Optimizing the annealing time can effectively develop a fine and stable grain structure in Al-Mg 5xxx alloys. During tensile deformation, Alloy 2 consistently showed higher ductility compared to Alloy 1 at low strain rates (170% vs. 138% at 0.001 s−1 and 163% vs. 134% at 0.01 s−1), whereas at a high strain rate of 1 s−1, both alloys displayed comparable tensile elongation. The high superplastic response of Alloy 2 at low strain rates renders it a superior superplastic alloy for HSBF applications.

Effects of Strain Rate and Temperature on Plastic Deformation Behavior of Molybdenum-Based High-Speed Tool Steel HS-6-5-2

Effects of Strain Rate and Temperature on Plastic Deformation Behavior of Molybdenum-Based High-Speed Tool Steel HS-6-5-2

MYH6 Variants Are Associated with Atrial Dysfunction in Neonates with Hypoplastic Left Heart Syndrome

Background: MYH6 variants are the most well-known genetic risk factor (10%) for hypoplastic left heart syndrome (HLHS) and are associated with decreased cardiac transplant-free survival. MYH6 encodes for α-myosin heavy chain (α-MHC), a contractile protein expressed in the neonatal atria. We therefore assessed atrial function in HLHS patients with MYH6 variants. Methods: We performed a retrospective, blinded assessment of pre-stage I atrial function using 2D speckle-tracking echocardiography (2D-STE). Variant carriers were control-matched based on AV valve anatomy, sex, and birth year. Studies were obtained postnatally from awake patients prior to surgical intervention. Right atrial (RA) and right ventricular (RV) strain and strain rate (SR) were measured from the apical four-chamber view. Results: A total of 19 HLHS patients with MYH6 variants had echocardiograms available; 18 were matched to two controls each, and one had a single control. RA active strain (ASct) was decreased in variant carriers (−1.41%, IQR −2.13, −0.25) vs. controls (−3.53%, IQR −5.53, −1.28; p = 0.008). No significant differences were identified in RV strain between the groups. RA reservoir strain (ASr) and conduit strain (AScd) positively correlated with heart rate (HR) in MYH6 variant carriers only (ASr R = 0.499, p = 0.029; AScd R = 0.469, p = 0.043). RV global longitudinal strain (GLS) as well as RV systolic strain (VSs) and strain rate (VSRs) correlated with HR in controls only (GLS R = 0.325, p = 0.050; VSs R = 0.419, p = 0.010; VSRs R = 0.410, p = 0.012). Conclusions: We identified functional consequences associated with MYH6 variants, a known risk factor for poor outcomes in HLHS. MYH6 variant carriers exhibit impaired RA contractility despite there being no differences in RV function between variant carriers and controls. MYH6 variants are also associated with an ineffective RA reservoir and conduit function at high heart rates, despite preserved RV diastolic function. RA dysfunction and reduced atrial “kick” may therefore be a significant contributor to RV failure and worse clinical outcomes in HLHS patients with MYH6 variants.

Influence of experimental conditions on some in-vitro biomechanical properties of the sow’s perineum

The aim of this work was to develop an experimental protocol that takes into account the influence of experimental conditions on these perineal tissues, before determining their mechanical properties. Samples of each perineal tissue layer were obtained from the skin, the vagina, the external anal sphincter (EAS), the internal anal sphincter (IAS) and anal mucosa of freshly dead sows. They were tested in quasi-static uniaxial tension using the Mach-1 testing machine. Stress-strain curves of each perineal tissue layer before the first damage for each sow were obtained and modeled by hyperelastic laws described by three coefficients: C1, C2, and C3 (Yeoh model). The influence of sample preparation conditions such as tissue freezing, hygrometry and sample orientation were evaluated, and the conditions under which the tests were performed such as the displacement velocity during testing were also evaluated by analysing C1-coefficient. This study suggested that sample preparation conditions such as tissue freezing for 24 h, storage in cellophane paper for two hours and the strain rate did not statistically affect the C1-hyperelastic coefficient for each perineal layer (p > 0.05). Samples should not be stored in saline for 2 h (p < 0.05). Sample orientation did not influence C1-hyperelastic coefficient (p > 0.05). This experimental protocol could be used to study in vitro biomechanical properties of perineal tissues in order to better understand perineal tears during delivery.

Effect of Compressive Strain Rates on Viscoelasticity and Water Content in Intact Porcine Stomach Wall Tissues.

Laparoscopic staplers are used extensively to seal and transect tissue. These devices compress tissue between the stapler jaws to achieve a desired compressed tissue thickness in preparation for stapling. The extent and rate of compression are dependent on surgeon technique, tissue characteristics, and stapler type, all of which can impact stapling outcomes such as bleeding, staple line leaks, and tissue healing. Historically, surgeons have relied on their experience, training, and tactile feedback from the device to optimize stapling. In recent years, the transition to electromechanical and robotic staplers has greatly impacted the tactile feedback available to the surgeon. This raises new questions about the optimal rates of tissue compression and the resultant tissue forces. This study quantifies the transmural biomechanics of the porcine stomach wall. Multi-rate indentation tests were used to observe the effects of indentation rate on the viscoelastic behavior of the stomach tissue during indentation, stress relaxation, and unconstrained recovery. Results show that the stomach wall demonstrates higher stress relaxation (88% vs 80%) and greater strain recovery (52% vs 47%) when indented at high rates (37.5%/s) vs slow rates (7.5%/s). Additionally, water content analysis was used to study fluid flow away from indented regions. Unindented regions were found to have greater water content compared to indented regions (78% compared to 75%). This data generated in this study may be used to enable the development of constitutive models of stomach tissue, which in turn may inform the control algorithms that drive compressive surgical devices.

Dynamic Strain Rate Effect and Macro–Micro-Fracture Mechanism of Raw Coal Under True Triaxial Conditions

Dynamic Strain Rate Effect and Macro–Micro-Fracture Mechanism of Raw Coal Under True Triaxial Conditions

On the dynamic failure mechanism of Vit-1 bulk metallic glass: Coupling effects of pre-made damage and strain rate

To clarify the two distinct effects and the underlying physical mechanisms of pre-made damage on the failure strength of bulk metallic glass (BMG), i.e. strengthening or weakening, the influence of axial pre-compression on the dynamic failure of Vit-1 BMG are investigated experimentally. Quasi-static and dynamic compression tests were conducted on pre-compressed BMG specimens for a wide range of nominal strain rates between 0.001 s−1 to 6000 s−1. The focus is on the coupled effects of pre-compression and strain rate on the dynamic failure stress. Two contrasting mechanisms were identified that influence how the pre-made shear bands affect the propagation of cracks under different strain rates. It will be shown that the dynamic failure stress exhibits a transition from strengthening to knockdown with increasing strain rate; and, that the extent of these strengthening and knockdown effects depends on the pre-compression strain level. Finally, a failure model that captures the effects of both strain rate and pre-made damage is proposed.

Hot Deformation Behavior and Microstructure Evolution of the Maraging Stainless Steel

Hot deformation behavior of the maraging stainless steel is studied in temperature range from 900 to 1150 °C and strain rate from 0.1 to 10 s−1. When the deformation temperature is 900−950 °C, the abnormal stress increase is observed at the end of the flow curves. Transmission electron micrographs reveal that the Laves phase at the interface between prior austenitic (γ) and high‐temperature ferrite (δ) impedes hot deformation. The microstructure analysis shows that the dynamic recrystallization (DRX) mechanism of γ and δ is discontinuous DRX and continuous DRX, respectively. When the specimens are deformed at 950 °C, the extent of DRX at a strain rate of 5 s−1 is higher than at 0.1 s−1. This anomaly is due to adiabatic heating causing the actual deformation temperature at high strain rate () to be higher than at low , indicating that DRX is more influenced by temperature compared to . The influences of adiabatic heating and friction are corrected. Strain‐dependent constitutive equation is developed based on the revised flow curves, yielding an average absolute relative error of 4.69% and a correlation coefficient of 0.99; the prediction accuracy exceeds 90% when the relative error is within 10%.

Influence of Flagella on Salmonella Enteritidis Sedimentation, Biofilm Formation, Disinfectant Resistance, and Interspecies Interactions.

Flagella are essential for bacterial motility and biofilm formation by aiding bacterial attachment to surfaces. However, the impact of flagella on bacterial behavior, particularly biofilm formation, remains unclear. This study constructed two flagellar mutation strains of Salmonella Enteritidis (SE), namely, SE-ΔflhD and SE-ΔflgE, and confirmed the loss of flagellar structures and motility in these strains. The mutant strains exhibited growth comparable with the wild-type (WT) strain but had higher sedimentation rates. Biofilm biomass did not differ significantly between the WT and mutant strains, except for SE-ΔflgE at 3 d. SE-ΔflgE showed increased susceptibility to sodium hypochlorite compared to the WT. The co-sedimentation rate of flagella-deficient strains was lower than the WT, and the biomass of dual-species biofilm formed by Bacillus paramycoides B5 with SE-ΔflhD or SE-ΔflgE was significantly lower than with the WT. These findings emphasize the significance of SE flagella in biofilm formation and interspecies interactions, offering insights into targeted biofilm prevention and control measures.

Investigating the influence of ferric oxide grade alumino‐silicate cenosphere particulates and heat treatment on the microstructural evolution and mechanical properties of Al6061/ferric oxide alumino‐silicate cenosphere (x weight %) composite

AbstractThe main aim of this investigation is to fabricate aluminum 6061 composites with three different weight percentages of ferric oxide grade alumino silicate cenosphere (1 wt.%, 3 wt.%, and wt.%) by the stir‐casting process. The fabricated cast composite and T6 heat‐treated composite is used to obtain a fundamental understanding of various weight percentages of the cenosphere and the influence of heat treatment on the microstructural changes, mechanical characteristics, the mechanism of fracture, and the interface between the aluminum‐matrix and ferric oxide grade alumino‐silicate cenosphere particulates. Tensile and compressive tests with a constant strain rate (0.5 mm ⋅ min−1) were carried out to study the strength and to find a correlation between the various weight fractions of cenosphere and heat treatment. Investigations of the changes in the microstructure of the aluminum ferric oxide grade alumino silicate cenosphere composite and the fractography of the fracture surface are investigated using optical and scanning electron microscope. X‐ray diffraction was utilized to confirm the results obtained from optical and scanning electron microscope analyses for phase characterization validation. A maximum of 30 % increase in hardness value, 20 % increase in tensile strength value, 33 % increase in maximum compressive strength value, and 2 % increase in elongation values are observed in heat‐treated composite when compared to cast composite.

Distinct Contributions of Particle Adsorption and Interfacial Compression to the Surface Pressure of a Fluid Interface.

Particle-laden interfaces stabilize emulsions and foams and can serve as a platform for multiscale materials. Favorable wetting of a particle to a fluid interface reduces the apparent interfacial tension through area replacement with a linear relationship between the apparent surface pressure and the particle area fraction. The area replacement model is widely employed, often up to particle area fraction reaching the maximum hexagonal packing. However, data directly supporting the area replacement model are limited, and the description ignores contributions from particle-particle interactions and does not describe the surface pressure during the compression of a particle-laden interface. This work reports on the direct validation of the area replacement model through the direct measurement of the adsorption energy, surface pressure, and area fraction of adsorbed particles. Experiments combining tensiometry and confocal imaging during the adsorption of colloidal particles to the oil-water interface confirm the area replacement model within the observed range of area fraction, but only when the drop area is kept constant. Results highlight the importance of keeping the droplet area constant during particle adsorption to extract the adsorbed amount from tensiometry experiments. As particles adsorb to the interface, the droplet area tends to change and compresses or expands the interface. This change in area is associated with an increase in area fraction at nearly constant surface pressure, which deviates from the area replacement model. In contrast to particle adsorption, slow compression of the fluid interface leads to a negligible change in surface pressure up to an area fraction of η ∼ 0.26 for the materials systems investigated. Increase in surface pressure during compression is due to particle-particle interactions, while compression at higher strain rates introduces additional contributions from interfacial rheology.