Storage Tank Size Research Articles

Implementing a rainwater harvesting system in an arid region with an LCA approach

AbstractThe purpose of this study is to compare the life cycle assessment and reliability of different rainwater harvesting (RWH) systems in residential buildings in Tehran for a period of 50 years. Four main scenarios based on the number of stories (1, 2, 3, and 4) each including five sub-scenarios based on the size of the rainwater storage tank (2.5m3, 5m3, 7.5m3, 10m3, 12.5m3) and one using solely tap water were defined. Simapro software was used for life cycle assessment which was carried out using the endpoint and midpoint methods. The collected rainwater is assumed to be merely used to fill flush tanks and if it cannot satisfy this demand, tap water will be used. The results show that in an arid city like Tehran, collecting rainwater does not even come close to meeting non-potable water needs, and in most scenarios, tap water must be used for more than half of the days. Despite the low reliability of RWH systems, they perform better than tap water in most environmental impact categories because the processes used to produce tap water have the highest contribution to environmental damage. Among the sub-scenarios that use rainwater for flush tank demands, in almost all environmental impact categories, sub-scenarios that collect more rainwater (higher storage tank sizes) have better performance. The performance of sub-scenarios that use more rainwater is better in the endpoint environmental categories of ecosystems and human health; however, this trend is the opposite in the impact category of resources. Graphical abstract

Lignin extraction in chemical pulp mills: The role of flexible operation

Lignin extracted from black liquor in chemical pulp mills can potentially replace fossil carbon feedstocks in fuels and materials, thereby increasing the economic and environmental added values of woody biomass. However, since lignin extraction reduces the electricity generation of the mill, the added value depends on the characteristics of the electricity market in which the mill operates. In this study, a model mill is exposed to two different electricity price profiles: the low and steady prices of south-central Sweden in Year 2019; and the high and volatile prices of the same region in Year 2022. For the model mill, investments in lignin extraction designed to increase pulp production are economically viable and have low levels of sensitivity to electricity price levels and price volatility. The viability of lignin extraction without increased pulp production depends on the relationship between the electricity and lignin prices. With stable electricity prices, or steady mill operation, a rule-of-thumb holds that for lignin extraction to be viable, the lignin price (€/t) must be 1.8-times the average electricity price (€/MWh) plus 40 €/t for the supply of chemicals. With volatile electricity prices and flexible operation of the recovery boiler, the mill can shift the loss in electricity sales to low-price hours, thereby saving 15–70 % of the operational costs of lignin extraction, as compared to steady operation. This effect can be further enhanced by increasing the capacity of the lignin extraction process or extending the size of the black liquor storage tank. The proposed flexibility measures allow the market-integrated pulp mill to export lignin to replace fossil carbon supplies in other sectors, while supporting the electricity system during hours with high demand and low supply.

Optimization of Electrical and Thermal Storage in a High School Building in Central Greece

Nearly zero-emission buildings (nZEBs) are increasingly being constructed in Europe. There are also incentives to refurbish older buildings and transform them into nZEBs. However, permission is not always granted for their connection to the grid to infuse surplus photovoltaic electricity due to the grid being overloaded with a large number of renewables. In this study, the case of a refurbished school building in Central Greece is examined. After refurbishing it, a significant amount of photovoltaic electricity surplus is observed during the summer and neutral months, which cannot be exported to the grid. The absence of an adequate battery storage capacity resulted in the rejection of an application for exporting the school’s surplus to the network and the photovoltaic installation staying idle. An alternative approach is proposed in this work, involving a shift in the export of the photovoltaic electricity surplus to the evening hours, in order for the school to be granted permission to export it to the network. To this end, an optimal battery storage size is sought by employing a building energy system simulation. The mode of operation of the battery designed for this application is set to discharge daily, in order to export the electricity surplus in the afternoon hours to the evening hours, when it is favorable for the network. Additionally, the optimal size of the thermal energy storage of the heating system is studied to further improve its energy efficiency. Our battery and storage tank size optimization study shows that a significant battery capacity is required, with 12 kWh/kWp photovoltaic panels being recommended for installation. The ever-decreasing cost of battery installations results in the net present value (NPV) of the additional investment for the battery installation becoming positive. The solution proposed forms an alternative path to further increase the penetration of renewables in saturated networks in Greece by optimizing battery storage capacity.

Novel custom-made design and analysis of hydrogen PEM fuel cell for high endurance small UAV applications.

The purpose of this paper is to propose a new methodology to devise a custom-made hydrogen-based proton-exchange membrane fuel cell (PEMFC) system for a class of experimental fixed-wing small unmanned aerial vehicles (SUAVs). The proposed fuel cell provides three times higher flight endurance than the conventional battery-based powertrain. The chosen SUAV represents a class of high-altitude UAVs, having an operational altitude of 4500m (14,760ft), cruising speed of 12-20m/s (39.4-65.6 ft/s), take-off weight of 4kg, wing-span of 1.61 m (5.28 ft) and battery-powered flight endurance of 1 h. The characteristic parameters and design configurations of the fuel cell are determined by employing the first principles of electrochemistry and thermodynamics. Corresponding simulations are performed using popular development tools like MATLAB/Simulink. The vital results in the form of - polarization and power curves for fuel cells, against the current density are obtained, which are further narrowed down to meet the target power requirements for determining the size of the hydrogen storage tank. The paper also comments on the auxiliary systems and fuel cell powertrain for SUAVs. Finally, the design efficiency of 54% for the fuel cell is achieved with respect to equivalent voltage for heating value with the calculated hydrogen storage tank size of 5.688ls. This yields three times higher flight endurance as compared to the flight time found in literature for the same class of SUAVs.

Solar Energy for Water Optimization: Advancing Clean Water Distribution at Universitas Samudra

The use of solar energy has become increasingly popular in recent years due to sustainability and environmental benefits. Universitas Samudra is designing the centralization of water distribution using solar energy as an energy resource. By using solar energy, universities can reduce their carbon footprint and energy costs while improving access to clean water for students, staff, and the surrounding community. This paper explores the benefits, challenges, design, and optimization of solar energy in pure water distribution, focusing on the technical and optimization of implementing such systems. The optimization is based on the water demand analysis and water source regarding the rainwater harvesting, then distribution points, including time patterns, peak demands, and seasonal fluctuation. The analyzing variables include the flow and residual head at each point distribution, pressure drop, pipe sizing, storage tank sizing, and water supply capacity input to each storage tank. The data is also based on the university's master plan and blueprint for the next 30 years of Development. Furthermore, the data will be analyzed and calculated to obtain optimum distribution pump capacity and pump working hours. The system was Analysed and calculated using Epanet hydraulic modeling software. The calculations result are that the distribution pump capacity is 16 L/s, the head is 30 M, the works for five hours a day, the power is 4.7 kW, the total energy is around 23.5 kWh per day, and The solar panel is eight kWp

Multi-Objective Optimization for Solar-Hydrogen-Battery-Integrated Electric Vehicle Charging Stations with Energy Exchange

The importance of electric vehicle charging stations (EVCS) is increasing as electric vehicles (EV) become more widely used. EVCS with multiple low-carbon energy sources can promote sustainable energy development. This paper presents an optimization methodology for direct energy exchange between multi-geographic dispersed EVCSs in London, UK. The charging stations (CSs) incorporate solar panels, hydrogen, battery energy storage systems, and grids to support their operations. EVs are used to allow the energy exchange of charging stations. The objective function of the solar-hydrogen-battery storage electric vehicle charging station (SHS-EVCS) includes the minimization of both capital and operation and maintenance (O&M) costs, as well as the reduction in greenhouse gas emissions. The system constraints encompass the power output limits of individual components and the need to maintain a power balance between the SHS-EVCSs and the EV charging demand. To evaluate and compare the proposed SHS-EVCSs, two multi-objective optimization algorithms, namely the Non-dominated Sorting Genetic Algorithm (NSGA-II) and the Multi-objective Evolutionary Algorithm Based on Decomposition (MOEA/D), are employed. The findings indicate that NSGA-II outperforms MOEA/D in terms of achieving higher-quality solutions. During the optimization process, various factors are considered, including the sizing of solar panels and hydrogen storage tanks, the capacity of electric vehicle chargers, and the volume of energy exchanged between the two stations. The application of the optimized SHS-EVCSs results in substantial cost savings, thereby emphasizing the practical benefits of the proposed approach.

Techno-economic feasibility of various types of solar collectors for solar water heating systems in hot and semi-arid climates: A case study

The pursuit for sustainability and a reduction in reliance on non-renewable energy sources has fueled the growing use of solar energy systems worldwide. This study assesses the feasibility of using domestic solar heating systems in Kirkuk, Iraq. The study utilized T*SOL software focused on three different solar collector systems: Thermital, Eraslan, and Apricus, chosen based on their type of collector loop (open loop or closed loop), type of collector (flat plate or evacuated tube), and collector size. The impact of varying the size of the hot water storage tank was also analyzed. The aim was to find a cost-effective solution that maximizes energy efficiency, reduces initial and maintenance costs, and cuts CO2 emissions. The results of the economic analysis showed that the energy demand for the case study was 1430 kWh. Both open loop and closed loop systems were found to achieve a solar fraction of 86% using evacuated tube collectors, but the open loop system required a smaller storage tank. The amount of CO2 emissions avoided was estimated to be between 689.5 and 1316 kg/year. The study concludes that domestic solar heating systems in Kirkuk, Iraq offer a sustainable and cost-effective energy solution, eliminating the need for an electrical water heater and resulting in substantial energy savings.

Conceptual design of floating storage and regasification unit (FSRU) for Eastern Part Indonesia

Liquefied Natural Gas (LNG) can be used as an alternative fuel with environmentally friendly solutions. In general, the domestic distribution of natural gas in LNG is more cost-effective than transporting gas through underwater pipelines considering Indonesia as archipelagic country. According to Indonesia’s Minister of Energy and Mineral Resources Regulation Number 13 of 2020, the government supports converting 52 power plants to LNG. However, the current challenge in the LNG industry is the lack of supporting facilities. Storage and regasification facilities are among the infrastructure that requires optimization. Floating Storage and Regasification Unit (FSRU) are viable options for energy distribution that offer opportunities and competitiveness compared to onshore terminals. Small and medium-scale FSRU can serve as an alternative solution due to their relatively fast, flexible, and affordable development process. Therefore, this research will develop a small-medium FSRU design with a capacity of 60 MW − 70 MW in Eastern Indonesia. FSRU design should consist of four segments including location considerations and environmental conditions, powerplants gas requirements, LNG storage tank sizing and LNG regasification process. Calculations for various supporting FSRU components, seakeeping analysis, loading-offloading processes, 3D modelling and the integration of solar panels were discussed. The results obtained include the principal dimension, technical aspects of FSRU design, and the technology for LNG regasification processes used.

Flow batteries for net zero in New Zealand

AbstractFlow batteries (FBs) are characterized by relatively high round trip efficiencies and benefit from high scalability. The storable energy and the power of charging and discharging the battery can be increased by increasing the size of the electrolyte storage tanks and the electrodes. Charge and discharge cycles covering many hours may be designed with flow batteries. This makes flow batteries a better choice than lithium‐ion batteries for large‐scale energy storage systems, particularly for non‐dispatchable renewable energy systems such as wind and solar, where the energy generated is highly variable and requires effective energy storage solutions. However, flow batteries also have some disadvantages, including a higher cost per unit of energy stored compared with other batteries, as well as the use of materials that in some cases are toxic, expensive, or scarce. Additionally, flow batteries cannot solve the energy storage issues over long times of a grid only supplied by non‐dispatchable electricity such as wind or solar, namely intermittency and summer to winter variability of solar, or low wind days of wind. Despite these limitations, the potential benefits of flow batteries in terms of their scalability and long cycle life, and cost‐effectiveness in case their design could be improved, making them one of the key contributors progressing towards net zero. Specifically in New Zealand, in the progress toward net‐zero the total energy supply (TES) cannot be covered by only expanding wind energy production and pumped hydro energy storage (PHES). Solar photovoltaic and likely nuclear energy supply will have to be introduced. Not all of the TES will be electrified, part of the TES will need coverage by green hydrogen fuel. Hydrogen energy storage (HES) will have to grow much more than PHES, energy storage by FBs as well as lithium‐ion batteries (LIBs) will also have to be included, given their complementarity to the other energy storage systems.

Reliability and availability modelling of a retrofitted Diesel-based cogeneration system for heat and hot water demand of an isolated Antarctic base

The reduction of greenhouse gas emissions is a relevant challenge for a sustainable development. Waste heat could be used to produce hot water by using a recovery system. This article studies the availability of a combined heat and power systems (CHP) in extreme area (Antarctic) through the integration of a waste heat recovery system with a diesel generator to produce hot water. The reliability and availability principles are incorporated to explore how the profile of hot water consumption and the hot water storage tank size affect system availability. Different combined heat and power systems are thus classified, and their availability indexes modelled by adopting the continuous Markov approach and the state space model. The results indicate that the CHP systems availability is strongly influenced by the daily hot water demand profile. As a useful recommendation, one of the considerations for increasing availability, reducing costs and greenhouse gas emissions with the CHP system is to include a hot water tank in the analysis.

Performance evaluation of an enhanced self-storing evacuated tube solar collector in residential water heating application

Phase change materials (PCMs) offer higher levels energy storage density than conventional hot water tanks commonly used with solar hot water systems. The present study aims at investigating the integration of a selected PCM within the structure of an evacuated tube solar hot water system to create some compact thermal storage capacity. Then conventional solar water heater is compared with this novel PCM-based self-storing design. The results show that the proposed self-storing design can maintain the collector output temperature at around 63 °C after 15 h of not receiving any sunlight. That is whilst the output temperature of the normal collector drops down to ambient temperature in the same period. The obtained energy storage efficiency is 57 % and 75 %, and overall thermal efficiency is 49 % and 72 %, for the normal and the self-storing collectors, respectively. For the small-scale system used in this study, the proposed design helps reduce the size of the hot water storage tank required to supply the hot water demand by 55 %. The study also shows that the same design can even yield better performance at larger scales used in practical applications.

A Knowledge-Based Engineering System for the Planning of Networked Rainwater Harvesting and Distribution Systems

Rainwater harvesting attracts growing interest from the field of municipal planning. When considering a rainwater harvesting system as a design object, questions include whether the system is designed for a single property or for a local water network serving multiple properties, what allows for the inclusion of buffer tanks and resource balancing among participants in the network, how to size the tanks, and how robust the system is in the face of changing demands. Knowledge-based engineering provides methods and a tool set for such planning objects. For this article, the authors applied techniques based on model-based and resource-based configuration and Bayesian decision networks to propose a knowledge-based engineering system for residential, networked rainwater harvesting and distribution systems. This enables designers to investigate the effects of different catchment areas, adjust or minimize the storage tank sizes in the grid and evaluate their effect on the individual harvest and the exchange with a central network buffer, evaluate the demands within a neighborhood based on a detailed consumer model also over time, and test the sensitivities of the single sinks and sources to the water grid. For urban planners, this offers the possibility, for example, to make design obligations for housing construction or for the refurbishment of settlements.

On-site solar PV generation and use: Self-consumption and self-sufficiency

As energy storage systems are typically not installed with residential solar photovoltaic (PV) systems, any “excess” solar energy exceeding the house load remains unharvested or is exported to the grid. This paper introduces an approach towards a system design for improved PV self-consumption and self-sufficiency. As a result, a polyvalent heat pump, offering heating, cooling and domestic hot water, is considered alongside water storage tanks and batteries. Our method of system analysis begins with annual hourly thermal loads for heating and cooling a typical Australian house in Geelong, Victoria. These hourly heating and cooling loads are determined using Transient System Simulation (TRNSYS) software. The house’s annual hourly electricity consumption is analysed using smart meter data downloaded from the power supplier and PV generation data measured with a PV system controller. The results reveal that the proposed system could increase PV self-consumption and self-sufficiency to 41.96% and 86.34%, respectively, resulting in the annual imported energy being reduced by about 74%. The paper also provides sensitivity analyses for the hot and cold storage tank sizes, the coefficient of performance of the heat pump, solar PV and battery sizes. After establishing the limits of thermal storage size, a significant impact on self-efficiency can be realised through battery storage. This study demonstrates the feasibility of using a polyvalent heat pump together with water storage tanks and, ultimately, batteries to increase PV self-consumption and self-sufficiency. Future work will concentrate on determining a best-fit approach to system sizing embedded within the TRNSYS simulation tool.

Techno-economic analysis of a combined heat and power system integrating hybrid photovoltaic-thermal collectors, a Stirling engine and energy storage

This paper presents a comprehensive analysis of the energetic, economic and environmental performance of a micro-combined heat and power (CHP) system that comprises 29.5 m2 of hybrid photovoltaic-thermal (PVT) collectors, a 1-kWe Stirling engine (SE) and energy storage. First, a model for the solar micro-CHP system, which includes a validated transient model for the SE micro-CHP unit, is developed. Parametric analyses are performed throughout a year to evaluate the effects of key component sizes and operating parameters, including collector flow rate, storage tank size, SE micro-CHP flow rate, and battery capacity, on the energetic, economic and environmental performance of the proposed system using real hourly weather data, and thermal and electrical energy demand profiles of a detached house located in London (UK). The optimum component sizes and operating parameters are determined accordingly. The daily and monthly operating characteristics of the system are evaluated, and its annual performance is compared to those of a reference system (gas boiler plus grid electricity), as well as of other alternative solar-CHP systems including a PVT-assisted heat pump system and a standalone PVT system. The results indicate that the installation of such a system can achieve an annual electricity self-sufficiency of 87% and an annual thermal energy demand coverage of 99%, along with annual primary energy savings and carbon emission reduction rate of 35% and 37% relative to the reference system. Over 30 years of operation, the net present value (NPV) of the proposed system is £1990 and the discounted payback period is 28 years. The economics of the proposed system is very sensitive to utility prices, especially the electricity purchase price. Relative to the alternative solar systems, the proposed system offers greater environmental benefits but has a longer payback period. This implies that although the energy saving and emission reduction potential of the proposed system is significant, the initial/capital investment, especially of the SE CHP unit and the PVT collector array, are currently high, so efforts should focus on the cost reduction of these technologies.

Optimal design of water reuse networks in cities through decision support tool development and testing

Water scarcity and droughts are an increasing issue in many parts of the world. In the context of urban water systems, the transition to circularity may imply wastewater treatment and reuse. Planning and assessment of water reuse projects require decision-makers evaluating the cost and benefits of alternative scenarios. Manual or semi-automatic approaches are still common practice for planning both drinking and reclaimed water distribution networks. This work illustrates a decision support tool that, based on open data sources and graph theory coupled to greedy optimization algorithms, is able to automatically compute the optimal reclaimed water network for a given scenario. The tool provides not only the maximum amount of served reclaimed water per unit of invested cost, but also the length and diameters of the pipes required, the location and size of storage tanks, the population served, and the construction costs, i.e., everything under the same architecture. The usefulness of the tool is illustrated in two different but complementary cities in terms of size, density, and topography. The construction cost of the optimal water reclaimed network for a city of approximately 100,000 inhabitants is estimated to be in the range of €0.17–0.22/m3 (for a payback period of 30 years).

Analytical modelling of food storage cooling with solar ammonia-water absorption system, powered by parabolic trough collectors. Method

The study presents a new analytical model capable to reveal the thermal behaviour of all the components of the solar ammonia-water absorption system, powered by parabolic trough collectors, serving different types of food storages: refrigeration chamber, refrigerated food storage, freezing chamber and frozen food storage. The heat inputs, that determine the total cooling load, for each food storage spaces consist of: heat gains through walls, heat gains through ventilation (fresh air), heat that must be dissipated from the stored products (technological cooling load required to cool down the products) and heat gains through operation. The influence of the number of solar parabolic trough collectors and of the storage tank size on different parameters of the refrigeration plant are investigated under low and high storage temperatures.•Food cooling with solar absorption refrigeration system.•Hourly based variation of NH3-H2O solar absorption system performances.•Long term simulation of solar absorption cooling for refrigeration and cooling.

Assessment of Rainwater Harvesting Facilities Tank Size Based on a Daily Water Balance Model: The Case of Korea

Factors affecting rainwater resource management for the present and future include population growth, urbanization, and climate change. Rainwater harvesting (RWH) allows multiple urban water-related issues to be mitigated. In this study, a spreadsheet-based daily water balance model was developed to analyze the existing laws and regulations regarding the storage tank size of RWH facilities. Six buildings at different locations were selected for this study. Two are office buildings, two are school buildings, and two are sports buildings. The term “RWH facility evaluation criteria” is collectively used for rainwater supply satisfaction rate, rainwater guarantee rate, and rainwater utilization rate. A green roof can hold the rainwater for some time, reducing the peak flow and runoff volume. The results provide evidence that, among the selected studied buildings, buildings having a combination of a green roof and RWH facility score the highest in terms of RWH facility evaluation criteria, even though the actual tank size is much smaller than the standard tank size. This is the case with the Yesan County Office, in which a green roof connected to a small (66 m3) rainwater storage tank is installed. As a green roof can decrease the runoff volume, the rainwater can be managed efficiently with less pumping energy and only a small storage tank.

Development and validation of Nusselt number correlations for a helical coil based energy storage integrated with solar water heating system

Storage tanks based on helical coil heat exchangers are an integral part of solar water heating systems and require optimal design configuration to achieve maximum heat transfer and a longer storage period. This study is focused on thermal analysis of a vertical helical coil-based water storage tank and derivation of inner and outer Nusselt number correlations by considering the storage tank as well as helical coil and catering to both forced and natural convection effects. A fluid-fluid conjugate heat transfer transient state model is validated with experiments performed with 50/50 % water-glycol mixture as heat transfer fluid at flow rates of 2 and 3 L/min in a solar water heating system, while water remains at static flow condition inside the tank. To reduce the computational cost, a symmetrical downsized (50 % of the real storage tank size) model is also designed and validated, which showed a mean absolute percentage error of 3.25 %. In order to derive the mathematical correlations, alterations were made to the validated model by using coils with curvature ratios ranging from 0.09 to 0.184 with HTF flow rates in laminar flow regimes, ranging from 30 to 100 L h−1 at temperatures from 40 °C to 80 °C. Furthermore, inner Nusselt number mathematical correlations based on M number, curvature ratio, and Prandtl number showed good agreement with correlations derived by past investigators. Similarly, the outer Nusselt number of the coil was related to Rayleigh's number and the derived relations showed good agreement with the past studies, while Nuo = 0.1996 (Rado0.326) showed the least error of 2.06 %. Finally, thermal stratification analysis helped to understand that coil position and aspect ratio determine the thermocline developed inside the storage tank. Results show that extension of coil inside the tank up to 83.7 % of the tank height, ensured greater thermocline range, and tank with aspect ratio 3 turned to be better for thermal energy storage for longer period.

Influence of the water tank size and air source heat pump size on the energy saving potential of the energy storage heating system

“Clean heating” has become a national strategy for energy conservation and carbon reduction in China. The energy storage heating system with air source heat pump and water tank has been proven to be energy saving in the previous studies. However, how to determine the sizes of the water storage tank and the air source heat pump based on the building heating load profile has not been investigated comprehensively. In this paper, the model of the energy storage heating system is established on the TRNSYS platform and validated by long-term monitored data. The influence of the water storage tank size and the air source heat pump size on the energy saving potential of the energy storage heating system is investigated comprehensively. The results show that even a small water tank, i.e., 0.06 m3 ~ 0.5 m3, can reduce the start-stop loss of the air source heat pump effectively. When the water tank volume increases to 0.5 m3 and 1 m3, the start-stop loss is reduced from 12.5 % to 0.8 % and 0.2 %, respectively. When the water tank volume increases from 1 m3 to 4m3, the average operating temperature difference of the air source heat pump between the energy storage heating system and the baseline heating system increases from 0.7 to 3.3 °C, and the corresponding energy saving rates caused by the operating temperature difference is approximately 1.0 % ~ 6.3 %. When the ASHP size varies from 80 % to 100 % of the design heating load of the building, the energy saving rates change within 1 %. The ASHP size can be reduced to a certain extent to reduce the investment of the energy storage heating system.

Investigating the hybridisation of micro-scale concentrated solar trigeneration systems and wind turbines for residential applications using a dynamic model

Solar and wind energy sources are envisioned to play a key role in the transition towards fully renewable energy systems but both suffer from their intermittent nature, which can be relieved by hybridisation. Hence, the benefits of the complementarity of these sources are investigated hereunder by considering a small-scale hybrid trigenerative system consisting of a Linear Fresnel Reflector solar field with a 440 m2 collector area, a 20 kWe/100 kWt organic Rankine cycle unit combined with a latent heat thermal energy storage system, an absorption chiller, and a 20 kWe wind turbine for the provision of electricity, heating and cooling to 10 residential apartments. To this end, a dynamic model and suitable control logic are developed to assess and compare the performances of the proposed hybrid system concerning the solar plant and wind turbine separately.The results show that hybridisation can extend the annual thermal coverage by renewables by 3.7–6.1% for the investigated locations by increasing the operation of the organic Rankine cycle unit, especially in winter. In particular, the surplus electrical energy from the wind turbine is used to satisfy 6% and 4% more than the separate configuration of the annual thermal and electrical demands for Ancona. As a result of hybridisation, the annual thermal energy consumption of the boiler reduces by 8.3%, 9.9%, and 37.6% for Perugia, Ancona, and Messina respectively, which shows the impact of the profile of the energy sources. At the same time, hybridisation improves grid stability by reducing the excess electricity production 18.2%, 19.2%, and 26.3% for Perugia, Ancona, and Messina respectively.A sensitivity analysis for Ancona has revealed that the size of the water thermal energy storage tank does not have a significant impact on the electrical and thermal coverage of the hybrid system, while electrical and thermal coverages improve 11.1% and 6.7% respectively by doubling the wind turbine capacity along with a 14.8% drop in the thermal energy consumption by the boiler. In brief, the analysis has shown the complementarity of these energy sources and the benefits of hybridisation for trigenerative systems for residential buildings.