Stochastic Neighbor Embedding Research Articles

Feature extraction and fault diagnosis of photovoltaic array based on current–voltage conversion

Fault diagnosis plays a crucial role in the operation and maintenance (O&M) of photovoltaic (PV) arrays, and reasonable feature extraction is a prerequisite for effective fault diagnosis. In this paper, a feature extraction and fault diagnosis method based on current–voltage (I–V) conversion is proposed. First, the PV array modeling method based on the double diode model (DDM) and the reverse bias model (RBM) is proposed. This modeling method can simulate the I–V curves under different states and provide data foundation for feature extraction and fault diagnosis. Next, three procedures for correcting I–V curves and three feature enhancement methods are compared to select the optimal program for I–V conversion. The converted feature matrix is dimensionalized using T-distributed stochastic neighbor embedding (T-SNE) to achieve feature extraction. Finally, ten classification models for fault diagnosis are adopted to verify the effectiveness of the proposed feature extraction method. Experimental results demonstrate that the proposed methods perform well on simulation data and provide satisfactory fault diagnosis results for the measured I–V curves. Among the classification models tested, the variable prediction model (VPM) shows the optimal comprehensive performance, with the computational time of 0.17 s and the accuracy of 99.4%.

Unravelling the gait and balance: A novel approach for detecting depression in young healthy individuals

Depression is a prevalent mental health disorder that affects people of all ages and origins; therefore, early detection is essential for timely intervention and support. This investigation proposes a novel method for detecting melancholy in young, healthy individuals by analysing their gait and balance patterns. In order to accomplish this, a comprehensive system is designed that incorporates cutting-edge technologies such as a Barometric Pressure Sensor, Beck Depression Inventory (BDI), and t-Distributed Stochastic Neighbour Embedding (t-SNE) algorithm. The system intends to capitalize on the subtle motor and physiological changes associated with melancholy, which may manifest in a person’s gait and balance. The Barometric Pressure Sensor is used to estimate variations in altitude and vertical velocity, thereby adding context to the evaluation. The mood states of participants are evaluated using the BDI, a well-established psychological assessment instrument that provides insight into their emotional health. Integrated and pre-processed data from the Barometric Pressure Sensor, BDI responses, and gait and balance measurements. The t-SNE algorithm is then used to map the high-dimensional data into a lower-dimensional space while maintaining the local structure and identifying underlying patterns within the dataset. The t-SNE algorithm improves visualization and pattern recognition by reducing the dimensionality of the data, allowing for a more nuanced analysis of depression-related markers. As the proposed system combines objective physiological measurements

Novel immune-related gene signature for risk stratification and prognosis prediction in ovarian cancer

BackgroundThe immune system played a multifaceted role in ovarian cancer (OC) and was a significant mediator of ovarian carcinogenesis. Various immune cells and immune gene products played an integrated role in ovarian cancer (OC) progression, proved the significance of the immune microenvironment in prognosis. Therefore, we aimed to establish and validate an immune gene prognostic signature for OC patients’ prognosis prediction.MethodsDifferently expressed Immune-related genes (DEIRGs) were identified in 428 OC and 77 normal ovary tissue specimens from 9 independent GEO datasets. The Cancer Genome Atlas (TCGA) cohort was used as a training cohort, Univariate Cox analysis was used to identify prognostic DEIRGs in TCGA cohort. Then, an immune gene-based risk model for prognosis prediction was constructed using the LASSO regression analysis, and validated the accuracy and stability of the model in 374 and 93 OC patients in TCGA training cohort and International Cancer Genome Consortium (ICGC) validation cohort respectively. Finally, the correlation among risk score model, clinicopathological parameters, and immune cell infiltration were analyzed.ResultsFive DEIRGs were identified to establish the immune gene signature and divided OC patients into the low- and high-risk groups. In TCGA and ICGC datasets, patients in the low-risk group showed a substantially higher survival rate than high-risk group. Receiver operating characteristic (ROC) curves, t-distributed stochastic neighbor embedding (t-SNE) analysis and principal component analysis (PCA) showed the good performance of the risk model. Clinicopathological correlation analysis proved the risk score model could serve as an independent prognostic factor in 2 independent datasets.ConclusionsThe prognostic model based on immune-related genes can function as a superior prognostic indicator for OC patients, which could provide evidence for individualized treatment and clinical decision making.

MBC-Net: long-range enhanced feature fusion for classifying remote sensing images

PurposeClassification of remote sensing images (RSI) is a challenging task in computer vision. Recently, researchers have proposed a variety of creative methods for automatic recognition of RSI, and feature fusion is a research hotspot for its great potential to boost performance. However, RSI has a unique imaging condition and cluttered scenes with complicated backgrounds. This larger difference from nature images has made the previous feature fusion methods present insignificant performance improvements.Design/methodology/approachThis work proposed a two-convolutional neural network (CNN) fusion method named main and branch CNN fusion network (MBC-Net) as an improved solution for classifying RSI. In detail, the MBC-Net employs an EfficientNet-B3 as its main CNN stream and an EfficientNet-B0 as a branch, named MC-B3 and BC-B0, respectively. In particular, MBC-Net includes a long-range derivation (LRD) module, which is specially designed to learn the dependence of different features. Meanwhile, MBC-Net also uses some unique ideas to tackle the problems coming from the two-CNN fusion and the inherent nature of RSI.FindingsExtensive experiments on three RSI sets prove that MBC-Net outperforms the other 38 state-of-the-art (STOA) methods published from 2020 to 2023, with a noticeable increase in overall accuracy (OA) values. MBC-Net not only presents a 0.7% increased OA value on the most confusing NWPU set but also has 62% fewer parameters compared to the leading approach that ranks first in the literature.Originality/valueMBC-Net is a more effective and efficient feature fusion approach compared to other STOA methods in the literature. Given the visualizations of grad class activation mapping (Grad-CAM), it reveals that MBC-Net can learn the long-range dependence of features that a single CNN cannot. Based on the tendency stochastic neighbor embedding (t-SNE) results, it demonstrates that the feature representation of MBC-Net is more effective than other methods. In addition, the ablation tests indicate that MBC-Net is effective and efficient for fusing features from two CNNs.

Ballastless track arching recognition based on one-dimensional residual convolutional neural network and vehicle response

In the long-term service process, high-temperature load will lead to ballastless track arching. The ballastless track arching will reduce the structural integrity, affect the smoothness of the line, and even endanger the safety of driving. Existing detection methods are costly, complex and not suitable for large-scale. This study proposes a low-cost, simple detection method based on one-dimensional residual convolutional neural network and vehicle response to recognize the arching. The vehicle responses in the simulation model are used as inputs to compare the recognition accuracies of different algorithms for the arching, and the vehicle response features extracted by the optimal algorithm are visualized in 3D using t-Distributed Stochastic Neighbor Embedding. The results show that the vehicle vertical acceleration is sensitive to the arching amplitude, and the influence of the arching on the vehicle vertical acceleration ranges from about 40 m, and, the vehicle vertical acceleration in the range of 40 m is chosen as the input. The Network 2–2 containing two residual blocks 2 has the highest recognition accuracy. The accuracy at different vehicle speeds ranged from 96.5 % to 97.5 %, and the average accuracy at a single arching magnitude ranged from 95.0 % to 100 %. The original vehicle response features under different arching magnitudes are very complexly distributed in 3D space with more overlapping. After Network 2–2 processing, the vehicle response features corresponding to different arching magnitudes are basically separated in 3D space, and only very few features overlap. It shows that Network 2–2 has strong robustness and vehicle response feature extraction capability.

High-Dimensional Feature Space for Diabetes Diagnosis and Identification of Diabetic-Sensitive Features in Ayurvedic Nadi Signals

Nadi-based disease diagnosis is a traditional art in Ayurvedic medicine that is an inquisitive yet not widely comprehended subject. A collection of higher dimensional features from a preprocessed Nadi dataset was extracted and analyzed to diagnose diabetes. The t-distributed Stochastic Neighbor Embedding was used to visualize the higher dimensional feature space in 2-D. The linear dimensionality reduction method of Principal Component Analysis and several linear and nonlinear classifiers were tested on the reduced feature space in identifying diabetes. The key outcomes of this paper are the ability to reduce the feature space by 73.33% while retaining a classification accuracy of 95.4%, identifying age as a compounding factor in diagnosis, and extracting the diabetes-sensitive features with eigenvalue loading.

Detection of Ocean Internal Waves Based on Modified Deep Convolutional Generative Adversarial Network and WaveNet in Moderate Resolution Imaging Spectroradiometer Images

The generation and propagation of internal waves in the ocean are a common phenomenon that plays a pivotal role in the transport of mass, momentum, and energy, as well as in global climate change. Internal waves serve as a critical component of oceanic processes, contributing to the redistribution of heat and nutrients in the ocean, which, in turn, has implications for global climate regulation. However, the automatic identification of internal waves in oceanic regions from remote sensing images has presented a significant challenge. In this research paper, we address this challenge by designing a data augmentation approach grounded in a modified deep convolutional generative adversarial network (DCGAN) to enrich MODIS remote sensing image data for the automated detection of internal waves in the ocean. Utilizing t-distributed stochastic neighbor embedding (t-SNE) technology, we demonstrate that the feature distribution of the images produced by the modified DCGAN closely resembles that of the original images. By using t-SNE dimensionality reduction technology to map high-dimensional remote sensing data into a two-dimensional space, we can better understand, visualize, and analyze the quality of data generated by the modified DCGAN. The images generated by the modified DCGAN not only expand the dataset’s size but also exhibit diverse characteristics, enhancing the model’s generalization performance. Furthermore, we have developed a deep neural network named “WaveNet,” which incorporates a channel-wise attention mechanism to effectively handle complex remote sensing images, resulting in high classification accuracy and robustness. It is important to note that this study has limitations, such as the reliance on specific remote sensing data sources and the need for further validation across various oceanic regions. These limitations are essential to consider in the broader context of oceanic research and remote sensing applications. We initially pre-train WaveNet using the EuroSAT remote sensing dataset and subsequently employ it to identify internal waves in MODIS remote sensing images. Experiments show the highest average recognition accuracy achieved is an impressive 98.625%. When compared to traditional data augmentation training sets, utilizing the training set generated by the modified DCGAN leads to a 5.437% enhancement in WaveNet’s recognition rate.

Automatic identification and morphological comparison of bivalve and brachiopod fossils based on deep learning.

Fossil identification is an essential and fundamental task for conducting palaeontological research. Because the manual identification of fossils requires extensive experience and is time-consuming, automatic identification methods are proposed. However, these studies are limited to a few or dozens of species, which is hardly adequate for the needs of research. This study enabled the automatic identification of hundreds of species based on a newly established fossil dataset. An available "bivalve and brachiopod fossil image dataset" (BBFID, containing >16,000 "image-label" data pairs, taxonomic determination completed) was created. The bivalves and brachiopods contained in BBFID are closely related in morphology, ecology and evolution that have long attracted the interest of researchers. We achieved >80% identification accuracy at 22 genera and ∼64% accuracy at 343 species using EfficientNetV2s architecture. The intermediate output of the model was extracted and downscaled to obtain the morphological feature space of fossils using t-distributed stochastic neighbor embedding (t-SNE). We found a distinctive boundary between the morphological feature points of bivalves and brachiopods in fossil morphological feature distribution maps. This study provides a possible method for studying the morphological evolution of fossil clades using computer vision in the future.

Dimensionality reduction for detection of anomalies in the IoT traffic data

This paper concerns cybersecurity issues in one of the fastest growing fields of modern computer systems the Internet-of-Things (IoT). In this field, intrusion detection plays a significant role in allowing IoT systems’ safe functioning and continuous operation. Visualizing the IoT data using dimensionality reduction allows for an easy and straightforward traffic analysis based on a graphical data representation, eligible for interpretation even by non-experts. We present a study on IoT network intrusion detection using three dimensionality reduction methods, namely, the Self-Organizing Map (SOM), the t-distributed Stochastic Neighbor Embedding (t-SNE), and the Neighborhood Retrieval Visualizer (NeRV). We show that applying them to the IoT traffic allows for reducing the original traffic feature space to a 2-D one, where anomalies may be noticed visually as outliers. The purpose of our study and its original contribution is conducting a comparative analysis of the t-SNE versus NeRV dimensionality reduction approaches in both: theoretical and empirical aspects. We notice and point out specific significant differences between these methods, which, as we claim, are responsible for their different performance in the IoT field, which is validated by our empirical study on real-world IoT traffic datasets. The results of our experimental research provide an interesting insight into the behavior of the investigated techniques and confirm their effectiveness and usability in IoT anomalies detection.

Predicting a Fall Based on Gait Anomaly Detection: A Comparative Study of Wrist-Worn Three-Axis and Mobile Phone-Based Accelerometer Sensors.

Falls by the elderly pose considerable health hazards, leading not only to physical harm but a number of other related problems. A timely alert about a deteriorating gait, as an indication of an impending fall, can assist in fall prevention. In this investigation, a comprehensive comparative analysis was conducted between a commercially available mobile phone system and two wristband systems: one commercially available and another representing a novel approach. Each system was equipped with a singular three-axis accelerometer. The walk suggestive of a potential fall was induced by special glasses worn by the participants. The same standard machine-learning techniques were employed for the classification with all three systems based on a single three-axis accelerometer, yielding a best average accuracy of 86%, a specificity of 88%, and a sensitivity of 86% via the support vector machine (SVM) method using a wristband. A smartphone, on the other hand, achieved a best average accuracy of 73% also with an SVM using only a three-axis accelerometer sensor. The significance analysis of the mean accuracy, sensitivity, and specificity between the innovative wristband and the smartphone yielded a p-value of 0.000. Furthermore, the study applied unsupervised and semi-supervised learning methods, incorporating principal component analysis and t-distributed stochastic neighbor embedding. To sum up, both wristbands demonstrated the usability of wearable sensors in the early detection and mitigation of falls in the elderly, outperforming the smartphone.

Noise‐robust gas path fault detection and isolation for a power generation gas turbine based on deep residual compensation extreme learning machine

AbstractOne of the major challenges facing fault diagnosis tools is their exposure to noise. The presence of noise may cause false alarms or the inability to detect a progressive fault in the early stages of its occurrence. Continuing previous efforts to address such a problem, in this paper, a noise‐robust diagnosis system for an industrial gas turbine is presented. The proposed structure employs a set of deep residual compensation extreme learning machines (DRCELMs). In this model, an optimal number of compensating blocks are trained to recover some of the lost useful information in the face of noise. Training and testing data required to develop the fault diagnosis model are generated by a performance model of the studied gas turbine. The t‐distributed stochastic neighbor embedding algorithm is employed for visualizing the gas path faults. Furthermore, the performance of the DRCELM is evaluated by comparing it with six other diagnosis models. The results indicate higher robustness of the DRCELM compared to other fault diagnosis systems. The proposed model presents a classification accuracy of >97% in noisy data and an accuracy of >98% in noise‐free data and combined data, while the average of fault positive rate and fault negative rate in noisy data is less than 2.5%.

Manifold Explorer: Satellite Image Labelling and Clustering Tool with Using Deep Convolutional Autoencoders

We present a novel approach to providing greater insight into the characteristics of an unlabelled dataset, increasing the efficiency with which labelled datasets can be created. We leverage dimension-reduction techniques in combination with autoencoders to create an efficient feature representation for image tiles derived from remote sensing satellite imagery. The proposed methodology consists of two main stages. Firstly, an autoencoder network is utilised to reduce the high-dimensional image tile data into a compact and expressive latentfeature representation. Subsequently, features are further reduced to a two-dimensional embedding space using the manifold learning algorithm Uniform Manifold Approximation and Projection (UMAP) and t-distributed Stochastic Neighbour Embedding (t-SNE). This step enables the visualization of the image tile clusters in a 2D plot, providing an intuitive and interactive representation that can be used to aid rapid and geographically distributed image labelling. To facilitate the labelling process, our approach allows users to interact with the 2D visualization and label clusters based on their domain knowledge. In cases where certain classes are not effectively separated, users can re-apply dimension reduction to interactively refine subsets of clusters and achieve better class separation, enabling a comprehensively labelled dataset. We evaluate the proposed approach on real-world remote sensing satellite image datasets and demonstrate its effectiveness in achieving accurate and efficient image tile clustering and labelling. Users actively participate in the labelling process through our interactive approach, leading to enhanced relevance of the labelled data, by allowing domain experts to contribute their expertise and enrich the dataset for improved downstream analysis and applications.

Medicinal-Chemistry-Driven Approach to 2-Substituted Benzoxazole-Estradiol Chimeras: Synthesis, Anticancer Activity, and Early ADME Profile.

The efficient synthesis of novel estradiol-based A-ring-fused oxazole derivatives, which can be considered as benzoxazole-steroid domain-integrated hybrids containing a common benzene structural motif, is described. The target compounds were prepared from steroidal 2-aminophenol precursors by heterocycle formation or functional group interconversion (FGI) strategies. According to 2D projection-based t-distributed stochastic neighbor embedding (t-SNE), the novel molecules were proved to represent a new chemical space among steroid drugs. They were characterized based on critical physicochemical parameters using in silico and experimental data. The performance of the compounds to inhibit cell proliferation was tested on four human cancer cell lines and non-cancerous cells. Further examinations were performed to reveal IC50 and lipophilic ligand efficiency (LLE) values, cancer cell selectivity, and apoptosis-triggering features. Pharmacological tests and LLE metric revealed that some derivatives, especially the 2-(4-ethylpiperazin-1-yl)oxazole derivative exhibit strong anticancer activity and trigger the apoptosis of cancer cells with relatively low promiscuity risk similarly to the structurally most closely-related and intensively studied anticancer agent, 2-methoxy-estradiol.

Exploration of RNA-Sequencing Data from Knee and Ankle Synovium using Machine Learning

Category: Ankle Arthritis; Basic Sciences/Biologics Introduction/Purpose: Osteoarthritis (OA) of the ankle is a debilitating condition that impacts millions of people. However, little is known about transcriptomic signatures associated with progression to OA, nor is the synovial contribution to the process established. Our prior work using RNA-sequencing (RNA-seq) has demonstrated unique differences between both ankle and knee OA, as well as ankle OA and non-OA ankles. In these analyses, we have shown visual clustering of ankle OA, ankle non-OA, and knee OA, with subtle transitional regions between each cohort. This study’s objective is to use demographic and patient factors that may contribute to differences in patients within each cohort and evaluate multiple machine learning (ML) clustering methods to better visualize OA subtypes of our complete ankle and knee synovium RNA-seq dataset. Methods: RNA-seq of synovium from ankle OA (n=30), knee OA (n=6), and ankle non-OA (n=30) were analyzed. Differential expression of genes and functional enrichments were determined using the Novomagic online platform (Novogene USA, Sacramento, CA) with DESeq2 software. ML methods were employed on the total gene read counts using Python coding language to perform data i) standardization via unit variance, ii) reduction via principal component analysis, t-distributed stochastic neighbor embedding, and uniform manifold approximation and projection (UMAP) techniques, and iii) clustering via k-means, fuzzy c-means, and gaussian mixture model. The number of principal components and clusters were determined via skree plot and elbow method, respectively. The technique with the highest silhouette score was chosen for subsequent analysis; a higher score indicates better separation of the dataset. Resulting data was plotted and color-coded to visualize the data based on original sample information (surgery, prior injury, sex, and age). Results: RNA-seq analysis of posttraumatic OA ankles compared to primary OA ankles identified decreased enrichment of MMP- 7, metalloproteinase associated with OA and fibrosis, and increased enrichment of IGKV2D-40, a less characterized gene. Significant reactome pathways in primary ankle OA included activation of matrix metalloproteinases, collagen formation and degradation, and extracellular matrix organization (Figure 1A). UMAP reduction with fuzzy C-means clustering (n=8 clusters) best separated the dataset. Qualitatively, the data appears separated by surgery type (ankle OA and ankle non-OA, knee OA), with a transitional region between distinct groupings (Figure 1B); a subtle but crucial difference between knee and ankle OA exists. Increased age appears associated with knee OA and some ankle OA, while patient sex did not display any clear separation in the data. Conclusion: Functional analysis of gene transcription displayed enrichment in genes and pathways related to fibrosis, further indicating ankle OA may be the result of a fibrotic signature. This study additionally demonstrated that ML provides unbiased visualization of multiple groups of RNA-seq data from knee and ankle synovium. A unique transitional group of patients who were deemed non-OA yet clustered with OA samples, suggesting some non-OA synovium that could be displaying signs of early OA progression. Ultimately, exploring the impact of patient demographics using multiple data reduction and ML can help identify unique subtype of patients within the context of OA.

Unsupervised Cluster Analysis of Walking Activity Data for Healthy Individuals and Individuals with Lower Limb Amputation.

This is the first investigation to perform an unsupervised cluster analysis of activities performed by individuals with lower limb amputation (ILLAs) and individuals without gait impairment, in free-living conditions. Eight individuals with no gait impairments and four ILLAs wore a thigh-based accelerometer and walked on an improvised route across a variety of terrains in the vicinity of their homes. Their physical activity data were clustered to extract 'unique' groupings in a low-dimension feature space in an unsupervised learning approach, and an algorithm was created to automatically distinguish such activities. After testing three dimensionality reduction methods-namely, principal component analysis (PCA), t-distributed stochastic neighbor embedding (tSNE), and uniform manifold approximation and projection (UMAP)-we selected tSNE due to its performance and stable outputs. Cluster formation of activities via DBSCAN only occurred after the data were reduced to two dimensions via tSNE and contained only samples for a single individual. Additionally, through analysis of the t-SNE plots, appreciable clusters in walking-based activities were only apparent with ground walking and stair ambulation. Through a combination of density-based clustering and analysis of cluster distance and density, a novel algorithm inspired by the t-SNE plots, resulting in three proposed and validated hypotheses, was able to identify cluster formations that arose from ground walking and stair ambulation. Low dimensional clustering of activities has thus been found feasible when analyzing individual sets of data and can currently recognize stair and ground walking ambulation.

A physics-based machine learning technique rapidly reconstructs the wall-shear stress and pressure fields in coronary arteries.

With the global rise of cardiovascular disease including atherosclerosis, there is a high demand for accurate diagnostic tools that can be used during a short consultation. In view of pathology, abnormal blood flow patterns have been demonstrated to be strong predictors of atherosclerotic lesion incidence, location, progression, and rupture. Prediction of patient-specific blood flow patterns can hence enable fast clinical diagnosis. However, the current state of art for the technique is by employing 3D-imaging-based Computational Fluid Dynamics (CFD). The high computational cost renders these methods impractical. In this work, we present a novel method to expedite the reconstruction of 3D pressure and shear stress fields using a combination of a reduced-order CFD modelling technique together with non-linear regression tools from the Machine Learning (ML) paradigm. Specifically, we develop a proof-of-concept automated pipeline that uses randomised perturbations of an atherosclerotic pig coronary artery to produce a large dataset of unique mesh geometries with variable blood flow. A total of 1,407 geometries were generated from seven reference arteries and were used to simulate blood flow using the CFD solver Abaqus. This CFD dataset was then post-processed using the mesh-domain common-base Proper Orthogonal Decomposition (cPOD) method to obtain Eigen functions and principal coefficients, the latter of which is a product of the individual mesh flow solutions with the POD Eigenvectors. Being a data-reduction method, the POD enables the data to be represented using only the ten most significant modes, which captures cumulatively greater than 95% of variance of flow features due to mesh variations. Next, the node coordinate data of the meshes were embedded in a two-dimensional coordinate system using the t-distributed Stochastic Neighbor Embedding (-SNE) algorithm. The reduced dataset for -SNE coordinates and corresponding vector of POD coefficients were then used to train a Random Forest Regressor (RFR) model. The same methodology was applied to both the volumetric pressure solution and the wall shear stress. The predicted pattern of blood pressure, and shear stress in unseen arterial geometries were compared with the ground truth CFD solutions on "unseen" meshes. The new method was able to reliably reproduce the 3D coronary artery haemodynamics in less than 10 s.

Using t-distributed stochastic neighbor embedding for visualization and segmentation of 3D point clouds of plants

Using t-distributed stochastic neighbor embedding for visualization and segmentation of 3D point clouds of plants

From blocks to cities: Morphology structure rooted in 3D patterns and forming clusters at the block level

This article proposes a 35D form index system to quantitatively describe the 3D form of urban blocks. Utilizing the T-distributed stochastic neighbor (TSNE) embedding algorithm for cluster analysis, the visually complex and disordered urban 3D texture is translated into distinct form clusters, enabling the recognition of the overall urban form structure from the block perspective. The research methodology includes experiments conducted in the central area of Nanjing and comparative analysis in three neighboring cities: Shanghai, Hangzhou, and Suzhou. Results demonstrate the efficacy of form parameters and cluster analysis in achieving sound recognition. The four cities differ remarkably in the number and distribution structure of clusters. Shanghai has the fewest types of clusters with a compact distribution, Suzhou has the most types with a dispersed distribution, and Hangzhou and Nanjing exhibit similar characteristics, located between Shanghai and Suzhou. Correlation analysis reveals a negative relationship between the number of cluster types and the level of urban socioeconomic development in similar areas. This research implies that governments and urban planners can exploit neighborhood morphological types to devise customized spatial management and renewal strategies. The overall urban structure can be improved by strategically minimizing the quantity and distribution of neighborhood morphological types, fostering socioeconomic development.

Spontaneous Facial Behavior Analysis Using Deep Transformer-based Framework for Child–computer Interaction

A fascinating challenge in robotics-human interaction is imitating the emotion recognition capability of humans to robots with the aim to make human-robotics interaction natural, genuine and intuitive. To achieve the natural interaction in affective robots, human-machine interfaces, and autonomous vehicles, understanding our attitudes and opinions is very important, and it provides a practical and feasible path to realize the connection between machine and human. Multimodal interface that includes voice along with facial expression can manifest a large range of nuanced emotions compared to purely textual interfaces and provide a great value to improve the intelligence level of effective communication. Interfaces that fail to manifest or ignore user emotions may significantly impact the performance and risk being perceived as cold, socially inept, untrustworthy, and incompetent. To equip a child well for life, we need to help our children identify their feelings, manage them well, and express their needs in healthy, respectful, and direct ways. Early identification of emotional deficits can help to prevent low social functioning in children. In this work, we analyzed the child’s spontaneous behavior using multimodal facial expression and voice signal presenting multimodal transformer-based last feature fusion for facial behavior analysis in children to extract contextualized representations from RGB video sequence and Hematoxylin and eosin video sequence and then using these representations followed by pairwise concatenations of contextualized representations using cross-feature fusion technique to predict users emotions. To validate the performance of the proposed framework, we have performed experiments with the different pairwise concatenations of contextualized representations that showed significantly better performance than state-of-the-art method. Besides, we perform t-distributed stochastic neighbor embedding visualization to visualize the discriminative feature in lower dimension space and probability density estimation to visualize the prediction capability of our proposed model.

A Hybrid Deep Learning Approach: Integrating Short-Time Fourier Transform and Continuous Wavelet Transform for Improved Pipeline Leak Detection.

A hybrid deep learning approach was designed that combines deep learning with enhanced short-time Fourier transform (STFT) spectrograms and continuous wavelet transform (CWT) scalograms for pipeline leak detection. Such detection plays a crucial role in ensuring the safety and integrity of fluid transportation systems. The proposed model leverages the power of STFT and CWT to enhance detection capabilities. The pipeline's acoustic emission signals during normal and leak operating conditions undergo transformation using STFT and CWT, creating scalograms representing energy variations across time-frequency scales. To improve the signal quality and eliminate noise, Sobel and wavelet denoising filters are applied to the scalograms. These filtered scalograms are then fed into convolutional neural networks, extracting informative features that harness the distinct characteristics captured by both STFT and CWT. For enhanced computational efficiency and discriminatory power, principal component analysis is employed to reduce the feature space dimensionality. Subsequently, pipeline leaks are accurately detected and classified by categorizing the reduced dimensional features using t-distributed stochastic neighbor embedding and artificial neural networks. The hybrid approach achieves high accuracy and reliability in leak detection, demonstrating its effectiveness in capturing both spectral and temporal details. This research significantly contributes to pipeline monitoring and maintenance and offers a promising solution for real-time leak detection in diverse industrial applications.