Sterilization Time Research Articles

Physician variation in adopting prophylactic salpingectomy at the time of postpartum sterilization for ovarian cancer risk reduction

Physician variation in adopting prophylactic salpingectomy at the time of postpartum sterilization for ovarian cancer risk reduction

OPTIMASI MEDIA DAN TEKNIK STERILISASI UNTUK MENINGKATKAN KUALITAS MISELIUM BIBIT F2 JAMUR TIRAM (Pleurotus ostreotus)

F2 seeds are a derivative of F1 cultivation grown in a medium containing cellulose. Sorghum seeds and corn seeds contain cellulose, hemicellulose, and lignin that can be used as innovative media for F2 seedling development and the growth of oyster mushroom mycelium. The purpose of this research is to determine the growth of F2 oyster mushroom mycelium on media of sorghum seeds and corn seeds that have been sterilized for 40 minutes and 60 minutes. The type of research used is an experiment with a Completely Randomized Design (CRD) in a factorial pattern consisting of 2 factors. Factor 1 is the media type: Sorghum Seeds, and corn Seeds. Factor 2 is the Sterilization Time: 60 minutes and 40 minutes. The parameters measured are the length of the mycelium, the spread of the mycelium, and the thickness of the mycelium in F2 oyster mushroom seedlings. Technical analysis uses quantitative descriptive data. Based on the results obtained regarding the growth of the F2 oyster mushroom mycelium, the highest growth was observed on sorghum seed media, measuring 13.81 cm, with a very thick and dense spread. The cellulose content affects the growth of the mycelium. Meanwhile, the lowest growth of the F2 oyster mushroom mycelium was found on corn seed media, measuring 11.27 cm, with a thin and uneven spread, and a density or thickness that is thin and sparse.

Coral-like AgNPs hybrided MOFs modulated with biopolymer polydopamine for synergistic antibacterial and biofilm eradication

Bacterial contamination is an intractable challenge in food safety, environments and biomedicine fields, and places a heavy burden on society. Polydopamine (PDA), a high molecular biopolymer, is considered as a promising candidate to participate in the design of novel antibacterial agents with unique contributions in biocompatibility, adherence, photothermal and metal coordination ability. In this study, coral-like ZIFL-PDA@AgNPs with excellent antibacterial properties and biocompatibility were prepared by embedding AgNPs into the biopolymer PDA-modulated ZIFL-PDA nanostructures by green reduction method to solve the problem with poor stability of AgNPs. Based on the plasma resonance effect of AgNPs, coral-like ZIFL-PDA@AgNPs had enhanced photothermal properties compared with ZIFL-PDA. Due to the synergistic effect between antibacterial metal ions mainly Ag+ and the photothermal effect, coral-like ZIFL-PDA@AgNPs showed enhanced anti-mature biofilm and antibacterial properties, which was dependent on its concentration and sterilization time. In addition, regulated by the ZIFL-PDA nanostructure, coral-like ZIFL-PDA@AgNPs demonstrated a unique Ag+ long-time sustained release behavior, giving it an extended antibacterial validity period and good biocompatibility. Antibacterial mechanism experiments indicated that coral-like ZIFL-PDA@AgNPs can significantly damage the integrity of bacterial cell membrane, reduce the content of ATP in bacterial by affecting the activity of succinate dehydrogenase, and induce the accumulation of reactive oxygen species, ultimately leading to bacterial death.

Changes in whey protein produced by different sterilization processes and lactose content: Effects on glycosylation degree and whey protein structure

In this study, the interaction patterns between whey protein and lactose were investigated after different ratios of whey protein and lactose (1:2.5; 1:3.0; 1:3.5; 1:4.0; 1:4.5) were treated with two typical sterilization process parameters in powdered products (68 °C, 20 min; 72 °C, 15 min) and two typical sterilization process parameters in liquid products (121 °C, 10 min and 121 °C, 15 min). It was found that the degree of the Maillard reaction of whey protein-lactose solution increased with increasing lactose content, increasing sterilization temperature, or extending sterilization time, which was accompanied by changes in the protein structure of whey protein. In addition, glycosylation accelerates the decrease in free sulfhydryl content, decreasing surface hydrophobicity and decreasing fluorescence intensity. These findings highlight the advantages of designing protein-carbohydrate formulations with a high ratio of whey protein-lactose (1:2.5) to meet the requirements of the product standards for preterm/low-birth-weight infant formulas. When comparing only the sterilization processes of powder and liquid products, the pasteurization process of powder products significantly reduced the degree of the Maillard reaction caused by heat treatment and reduced protein denaturation.

Pregnancy after Tubal Sterilization in the United States, 2002 to 2015

BackgroundTubal sterilization is the most commonly used method of contraception in the United States. Because contraceptive effectiveness influences contraceptive selection, we examined typical use failure rates after tubal sterilization in the United States.MethodsWe estimated rates of pregnancy after tubal sterilization using data from four waves of the National Survey of Family Growth (NSFG), representative samples of U.S. women aged 15 to 44 years, collected in 2002, 2006 to 2010, 2011 to 2013, and 2013 to 2015. Survey weighting was used in survival analysis to examine time to first pregnancy after tubal sterilization. Data from these participants were censored after a tubal reversal procedure, infertility treatment, hysterectomy, or bilateral oophorectomy. Reported pregnancy rates after tubal sterilization procedures were examined by using Kaplan–Meier curves and then multivariable Cox proportional-hazards models to examine the effects of age at tubal sterilization, race/ethnicity, education, Medicaid funding, and postpartum versus interval procedures.ResultsPregnancy after tubal sterilization was reported by 2.9 to 5.2% of participants across NSFG waves. In the most recent survey wave (2013 to 2015), the estimated percentage of participants with pregnancies within the first 12 months after a tubal sterilization procedure was 2.9%; at 120 months after tubal sterilization, the estimated percentage with a pregnancy was 8.4%. At all the time points examined, pregnancy after tubal sterilization was less common after postpartum procedures than after interval procedures; however, this difference was not evident in multivariable models. In multivariable models, chance of pregnancy decreased with age at time of tubal sterilization. Race/ethnicity, education, and Medicaid funding were not consistently associated with pregnancy after tubal sterilization.ConclusionsThese data suggest that there may be nontrivial rates of pregnancy after tubal sterilization.

Research on the rapid tissue breeding technology of the endangered plant Cibotium barometz (L.) J. Sm.

Cibotium barometz (L.) J. Sm., a fern, holds significant value in traditional Chinese medicine. This research aimed to establish a rapid tissue breeding technology for Cibotium barometz (L.) and provide a theoretical basis for its artificial breeding and industrial planting. The optimum conditions for spores germination were selected, including both the best sterilization time and the ideal spore germination medium. Subsequently, the optimal medium for proliferation and differentiation were chosen, and the optimal concentration of plant hormones was screened to determine the optimal medium. The rooting experiment was performed in two single-factor experiments by using differentiated sporophytes as materials. These experiments showed that the optimal sterilization time was 11 min and the best medium for germination was 1/8MS + 0.02 mg/L IAA. MS medium was suitable for proliferation, while WPM medium was suitable for sporophyte differentiation. The best medium for growth was MS + 1.0 mg/L IAA + 0.5 mg/L 6-BA. In the absence of sucrose, the seedlings barely grew and failed to differentiate into sporophytes. They showed optimal growth and differentiation at a sucrose concentration of 20 g/L. The plant growth regulators plant growth regulators used, including IAA, NAA, 6-BA, and GA3, showed more effective differentiation, wherease KT had a slightly weaker effect. The rooting rate reached the maximum when the concentrations of ABT and IBA were at 1.5 mg•L− 1 and IAA was at 1.0 mg•L− 1. The IBA had a significant effect on the average and the longest root length, while the three PGRs had no obvious effect on the average or maximum diameter. Plant tissue culture seedlings still have good genetic stability after subsequent generation. In this study, the optimal cultivation conditions for rapid breeding technology in tissue culture, covering stages from germination and growth to differentiation and rooting, were obtained. Moreover, sporophytes were successfully transplanted to the external environment. This study provided a theoretical reference for the industrial planting of C. barometz.

Innovative plasma treatment of orange juice to improve bioactive concentration: The effects of various parameters using response surface analysis.

Orange juice is a highly nutritious beverage. Traditional pasteurization methods cause nutrient loss and taste changes. Plasma treatment (PT) is an emerging method with a high sterilization rate. This study investigated the effects of corona discharge plasma on the sterilization of orange juice by changes in color difference, total phenol content, and pH value. Single-factor experiments revealed that higher voltage (40kV) and longer sterilization time (25min) had better sterilization effects. Response surface analysis indicated that frequency had the greatest impact on sterilization rates, and the optimal sterilization conditions were a voltage of 44.75kV, a frequency of 9.46kHz, and a sterilization time of 25min. Under these conditions, the sterilization rate reached 97.9%, meeting the national standard of 104 colony-forming units/mL (GB7101-2022). Compared to untreated juices, the color difference value was 16.32, the pH value decreased by 0.12, and the total phenol content increased by 0.669mg/mL. However, the evaporation of water plays an important role in increasing the total phenol co. Moreover, the comparative analysis showed that PT was comparable to pasteurization in terms of sterilization effects, flavor preservation, and the concentration of bioactive components. This study provides a theoretical basis for industrial applications of PT.

Efficacy Of Ultraviolet Irradiation For Sterilization Of Dental Instrumen Against Oral Microbiome Growth

Background: Oral microbiome bacteria can attach to a variety of surfaces including oral diagnostic devices. Oral diagnostic tools that are not properly cleaned and sterilized can be used as a place for bacteria to multiply and cause cross-infection. Objective: This research aims to test the success of sterilization equipment using Ultraviolet light to sterilize dental instruments when used for dental examination activities in the field. Methods: Randomized Experimental laboratory Pretest Posttest with Control Group Design. The subject of the study was the mouth glasses used after dental examination at UKGS. The intervention of the mouth glass was sterilized using Ultraviolet-c at three different times, namely 20 minutes, 25 minutes, and 30 minutes. Results: The results of Ultraviolet-c with One Way Anova test results showed a p-value of 0.000 (p0.05) indicating a significant difference in the number of oral microbiome bacteria between sterilization time and the number of oral microbiome bacterial colonies. Pearson correlation test p-value (p0.05) it can be concluded that there is a significant relationship between sterilization time and the number of oral microbiome colonies with a correlation coefficient of -0.850 which means that the longer the sterilization time, the number of oral microbiome bacteria decreases. Conclusion: Ultraviolet-c for 30 minutes is effective for sterilization of oral microbiome bacteria.

Modelling the Color and Microbial Properties of Canned Ngu by Response Surface Method

Background: Ngu is an African salad dressing used to improve the stability and shelf life of African salad. The aim of this study was to produce canned Ngu using three stabilizers at various concentrations, constant sterilization temperature, and varied sterilization times. Methods: Ngu (50 L) was prepared from potash using three stabilizers at various concentrations. A three-level factorial response surface design was applied to generate the experimental runs for the production of the canned Ngu. The Ngu emulsion was filled inside 250 ml bottle jars, sterilized at 121 oC at various times, and canned. The color of the canned Ngu was evaluated using the Comission Internationale de l'Eclairage color scale, and its microbiological attributes, Total Viable Count (TVC) and Total Fungal Count was determined with standard procedures. The effect of the stabilizers (Akparata, Ofo, and Carboxyl Methyl Cellulose), stabilizer concentration, and sterilization time on the color and microbial properties of the canned Ngu was assessed. The Statistical Software Design Expert version 8.0.7 was utilized for response surface analysis and derivation of model equation. Results: Increase in sterilization time increased the a* value and decreased the b* value of the canned Ngu. The quadratic effect of stabilizer, stabilizer concentration, and sterilization time indicated that the alteration of stabilizer from Carboxyl Methyl Cellulose to Akparata and then to Ofo increased the L* value, of the canned Ngu. An increase in the quadratic effect of stabilizer concentration increased the a* value but decreased the L* and b* values of the canned Ngu. However, the TVC and b* value of the canned Ngu reduced as the quadratic effects of the sterilization time increased. Conclusion: Total Fungal Count and TVC value of all the canned Ngu samples were within acceptable limits, ensuring the samples safe for human consumption.

Does Perioperative Administration of Rabies Vaccine in Dogs Undergoing Surgical Sterilization Induce an Adequate Antibody Response?

High-volume spay/neuter events may facilitate access to free-roaming dogs to admi-nister rabies vaccination, but important questions remain regarding the effect of surgery and anesthesia on the immune response to a vaccine administered in the perioperative period. This study evaluated the immunogenicity of primary rabies vaccination in dogs when administered during the immediate perioperative period at the time of surgical sterilization (ovariohysterectomy/orchidectomy). Healthy dogs of both sexes presenting for surgical sterilization who had never been vaccinated against rabies virus were eligible for enrollment in the study. Fifty dogs ranging in age from 5 to 96 months were enrolled and were vaccinated against rabies virus during the recovery period following anesthesia and surgery. Rabies virus neutralizing antibody (RVNA) titers were measured preoperatively and 28 days postoperatively. This cohort was compared to a historical control cohort of 57 dogs who received primary rabies vaccination for travel purposes and had RVNA titers measured at the same laboratory as the study group 28-35 days post-vaccination. After controlling for age and sex, there was no statistically significant difference in immunogenicity of a rabies vaccine administered to dogs during the perioperative period in comparison to dogs that received the rabies vaccine for travel alone in the absence of surgery. Perioperative administration of a rabies vaccine in dogs under-going surgical sterilization induces an adequate antibody response. We recommend that rabies vaccine be administered perioperatively during spay/neuter campaigns in canine rabies endemic areas if other opportunities to ac-cess veterinary care and rabies vaccination are limited.

Bioactive Compounds and Nutrition of Thai Sauces in Retort Pouch and Physicochemical Properties Kinetics During Storage

The objectives of this study were to investigate the bioactive compounds, including carotenoids, flavonoids, total phenolics, antioxidant activity, and nutritional values of two ready-to-cook Thai sauces of stir-fry curry sauce (SCS) and spicy-sour sauce (SSS) in retort pouch and to investigate the kinetics of physicochemical properties, including lightness (L*), water activity, pH and total soluble solids, of the products during storage at 30°C and 55°C. The results showed that the temperature and time for sterilization of SCS (low acid foods) was 121°C for 43 minutes and SSS (acid foods) was 102°C for 31 minutes. The moisture content was between 57.9 and 63.2%. SCS had higher total fat, saturated fat, and calories because it contained soybean oil and chili paste, but SSS had higher sugar and sodium content than SCS. Trans fats and vitamin C were not detected in either product. SSS had a higher content of total phenols, carotenoids (especially capsanthin, zeaxanthin, and β-carotene) and antioxidants than SCS. The representation of the physicochemical properties of the products as a function of temperature and time resulted in a linear model (R2 = 0.7222 – 0.9772). L*, water activity, pH decreased, and TSS increased during the 90-day storage at both 30°C and 55°C. The change was more remarkable when stored at 55°C than 30°C.

Non-pyrogenicity and biocompatibility of parylene-coated magnetic bead implants.

Clinical grade magnetic bead implants have important applications in interfacing with the human body, providing contactless mechanical attachment or wireless communication through human tissue. We recently developed a new strategy, magnetomicrometry, that uses magnetic bead implants as passive communication devices to wirelessly sense muscle tissue lengths. We manufactured clinical-grade magnetic bead implants and verified their biocompatibility via intramuscular implantation, cytotoxicity, sensitization, and intracutaneous irritation testing. In this work, we test the pyrogenicity of the magnetic bead implants via a lagomorph model, and we test the biocompatibility of the magnetic bead implants via a full chemical characterization and toxicological risk assessment. Further, we test the cleaning, sterilization, and dry time of the devices that are used to deploy these magnetic bead implants. We find that the magnetic bead implants are non-pyrogenic and biocompatible, with the insertion device determined to be safe to clean, sterilize, and dry in a healthcare setting. These results provide confidence for the safe use of these magnetic bead implants in humans.

Conservation of Palm Wine Using Ultraviolet Radiation

Purpose
 This study investigated the conservation of palm wine using ultraviolet radiation.
 Research Methodology
 The palm wine was conserved by sterilization with ultraviolet rays sterilizer. The time of contact of the rays and the intensity of the rays with palm wine was varied. The microorganisms considered include mould, yeast and bacteria.
 Results
 Results obtained shows that the microbial load of sterilized palm wine decreased with time of contact with rays. The microbial loads of the wine before and after sterilization were determined. More so, the microbial load further decreased during storage of sterilized samples. In fact, sterilization time of 240 seconds (4 minutes) reduced the mould and yeast from to and then to zero after 10 days of preservation.
 Limitation
 This research did not consider the effect of stirring on the microbial load reduction.
 Contribution
 This research has established an ideal sterilization time of 240 seconds (4 minutes) for palm wine sterilization.

Application of a temperature and pressure detector to the preventive maintenance of hospital autoclaves

Pressure steam sterilization is the preferred sterilization method for damp-heat resistant medical devices. This study aims to reveal the risk of sterilization failure by using temperature and pressure detectors to detect changes in the performance of the sterilizer. Six autoclaves in a general hospital were selected as the research objects, and the key sterilization parameters such as sterilization temperature, sterilization time, sterilization pressure, and equilibration time were verified, and the performance of the sterilizer was evaluated. This paper provides a new way to monitor the sterilization process and to detect hidden dangers.

Dry Heat Sterilization of a Pelleted, Natural Ingredient Rodent Diet.

Sterilization of rodent feed is recommended to eliminate potential murine pathogens and minimize microbial variability between batches. Most research institutions sterilize feed using steam/pressure (autoclave) or irradiation. Both methods have advantages and disadvantages that contribute to their suitability, including cost, maintenance, availability, and alterations to the exposed product. Dry heat sterilization, which has been in use for over 75 y, uses higher temperatures and longer sterilization times than steam autoclave and is most often used for delicate instruments or products that would be damaged by water such as powders or oil-based liquids. Dry heat sterilization in vivaria has been limited to date but is gaining popularity due to lower initial purchase and ongoing operational costs as compared with steam autoclaves. Little published information exists on the effects of dry heat sterilization on animal feed. We evaluated the sterility and chemical alterations of a natural ingredient, pelleted, rodent diet (NIH-31) after exposure to dry heat. Feed sterility was achieved using a dry heat exposure temperature of 160 °C (320 °F) for 4 h. This exposure resulted in a significant loss of heat-labile vitamins and significantly more acrylamide production as compared with the nonsterile, irradiated, and autoclaved feed.

A simulation study on enhancing sterilization efficiency in medical plastics through gamma radiation optimization

Gamma radiation is progressively emerging as an effective method to enhance the sterilization efficiency of medical plastics including Polyvinyl chloride (PVC). The parameters of the radiation facility will affect the efficiency of radiation sterilization. To investigate these effects, we simulate the gamma radiation sterilization performance of PVC material sample using Monte Carlo Method. The simulation results indicated that compared with the sterilization time of 20–90 min from high-temperature steam sterilization of medical waste, by optimizing the parameters of the model radiation facility, the radiation sterilization time can be reduced to 6.61 min. The optimized model facility parameters are as follows: the gamma photon energy is 1.25 MeV, the model space is 300 × 300 × 300 cm3, the reflective layer material is concrete and its thickness is 8 cm, the PVC sample layer area is 100 × 100 cm2, the distance between the radiation source and the PVC sample layer is 150 cm, the energy deposition in the bottom layer of the PVC sample layer is 1.31315 × 10–6 MeV/g. This study offers a potentially feasible way for PVC sterilization, while also providing a crucial reference for the further promotion and application of radiation sterilization technology.

Sustainable Janus lignin-based polyurethane biofoams with robust antibacterial activity and long-term biofilm resistance

Conventional antibiotic therapies have been becoming less efficient due to increasingly, and sometimes fully, antibiotic-resistant bacterial strains, sometimes known as “superbacteria” or “superbugs.” Thus, novel antibacterial materials to effectively inhibit or kill bacteria are crucial for humanity. As a broad-spectrum antimicrobial agent, silver nanoparticles (Ag NPs) have been the most widely commercialized of biomedical materials. However, long-term use of significant amounts of Ag NPs can be potentially harmful to human health through a condition known as argyria, in addition to being toxic to many environmental systems. It is, thus, highly necessary to reduce the amount of Ag NPs employed in medical treatments while also ensuring maintenance of antimicrobial properties, in addition to reducing the overall cost of treatment for humanitarian utilization. For this purpose, naturally sourced antimicrobial polylysine (PL) is used to partially replace Ag NPs within the materials composition. Accordingly, a series of PL, Ag NPs, and lignin-based polyurethane (LPU) composite biofoams (LPU-PL-Ag) were prepared. These proposed composite biofoams, containing at most only 2 % PL and 0.03 % Ag NPs, significantly inhibited the growth of both Gram-positive and Gram-negative bacteria within 1 h and caused irreversibly destructive bactericidal effects. Additionally, with a layer of polydimethylsiloxane (PDMS) on the surface, PDMS-LPU-PL(2 %)-Ag(0.03 %) can effectively prevent bacterial adhesion with a clearance rate of about 70 % for both bacterial biofilms within three days and a growth rate of more than 80 % for mouse fibroblasts NIH 3 T3. These lignin-based polyurethane biofoam dressings, with shorter antiseptic sterilization times and broad-spectrum antibacterial effects, are extremely advantageous for infected wound treatment and healing in clinical use.

Opportunistic Salpingectomy Between 2017 and 2020: A Descriptive Analysis

ObjectivesOpportunistic salpingectomy (OS) is the removal of fallopian tubes during another pelvic surgery for the purpose of ovarian cancer prevention. Herein, we describe the rates of OS at the time of hysterectomy and tubal sterilization between 2017 and 2020. MethodsThis study uses the Canadian Institute of Health Information’s Discharge Abstract Database and National Ambulatory Care Reporting System for all Canadian provinces and territories except for Quebec between the fiscal years 2017 and 2020. A descriptive analysis on all people aged 15 years and older who had hysterectomies or tubal sterilizations was conducted to determine the proportion of hysterectomies that included bilateral salpingectomy (OS) and the proportion of tubal sterilizations that were OS compared to tubal ligation. ResultsThere were 174 006 people included in the study. The proportion of hysterectomies that included OS increased from 31.7% in 2017 to 39.9% by 2020. With respect to tubal sterilizations, rates of OS increased from 26.3% of all tubal sterilizations in 2017 to 42.5% in 2020. British Columbia remained the jurisdiction with the highest rates of OS, but rates increased significantly in many jurisdictions, particularly at the time of tubal sterilization. ConclusionThe rates of OS have continued to increase in all Canadian jurisdictions following the official Society of Obstetricians and Gynaecologists of Canada recommendation to consider OS in 2015. Assuming that all tubal ligations could have been OS and 75% of hysterectomies with ovarian conservation could have included OS, our data indicate 76 932 missed opportunities for ovarian cancer prevention.

Stegano-Purge: An integer wavelet transformation based adaptive universal image sterilizer for steganography removal

Sterilization is the method of annihilating steganographic data hidden in a cover media. This paper proposes a visual quality preserving image sterilization method that effectively modifies stego-data embedded by various steganography algorithms on random greyscale images. The method applies one-level Integer Wavelet Transform (IWT) on a suspected stego image to produce HH, HL, LH and LL sub-bands. The value of a sub-band coefficient is modified according to its agitation quotient. The coefficient agitation is computed using the proposed metric Unnormalized Hellinger Distance (UHD) between a specific sub-band coefficient and its neighbours. To mitigate the issue of variable noise tolerance of IWT sub-bands, the proposed method performs parameter-controlled adaptive modification. Purification of up to 3 bits is done in the most noise-resilient HH channel and up to 2 bits in moderately noise-sensitive HL and LH channels. The highly noise-susceptible LL channel is sterilized by adaptive bit-flipping. A parameter control algorithm balances the amount of channel-wise bit modification to optimize the visual quality. The stego images for evaluation have been prepared by applying eleven state-of-the-art steganography methods including UNIWARD and HUGO on benchmark datasets of USC-SIPI and BossBase 1.01. The proposed method achieves improved performance in comparison with the state-of-the-art sterilization techniques in terms of the visual quality of sterilized image, embedding scheme-wise percentage of sterilization and the sterilization time.

Does Perioperative Administration of Rabies Vaccine in Dogs Undergoing Surgical Sterilization Induce an Adequate Antibody Response?

High-volume spay/neuter events may facilitate access to free-roaming dogs to administer rabies vaccination, but important questions remain regarding the effect of surgery and anesthesia on the immune response to a vaccine administered in the perioperative period. This study evaluated the immunogenicity of primary rabies vaccination in dogs when administered during the immediate perioperative period at the time of surgical sterilization (ovariohysterectomy/orchidectomy). Healthy dogs of both sexes presenting for surgical sterilization who had never been vaccinated against rabies virus were eligible for enrollment in the study. Fifty dogs ranging in age from 5 to 96 months were enrolled and were vaccinated against rabies virus during the recovery period following anesthesia and surgery. Rabies virus neutralizing antibody (RVNA) titers were measured preoperatively and 28 days postoperatively. This cohort was compared to a historical control cohort of 57 dogs who received primary rabies vaccination for travel purposes and had RVNA titers measured at the same laboratory as the study group 28-35 days post-vaccination. After controlling for age and sex, there was no statistically significant difference in immunogenicity of a rabies vaccine administered to dogs during the perioperative period in comparison to dogs that received the rabies vaccine for travel alone in the absence of surgery. Perioperative administration of a rabies vaccine in dogs undergoing surgical sterilization induces an adequate antibody response. We recommend that rabies vaccine be administered perioperatively during spay/neuter campaigns in canine rabies endemic areas if other opportunities to access veterinary care and rabies vaccination are limited.