Stepwise Debromination Research Articles

Polybrominated diphenyl ethers (PBDEs) in breast milk of Korea in 2011: Current contamination, time course variation, influencing factors and health risks

Breast milk is a valuable biological specimen to assess maternal and infant exposure to polybrominated diphenyl ethers (PBDEs). In this study, 208 breast milk samples were collected from 89 participants during lactation period, at <7, 15, 30, and 90 days postpartum, in four cities in Korea, and were determined for 19 PBDE congeners. The total PBDE concentrations (ΣPBDE) ranged from 0.23 to 68.4 (mean: 2.73) ng/g lipid weight, and were within the ranges reported for European and Asian countries. Within a month of lactation after delivery, no significant changes were found in the PBDE concentrations. The predominance of BDE 153 rather than BDE 47 was found in the most samples that BDE 153 was detected, and was likely to be associated with stepwise debromination of BDE 209. No associations were found between PBDE concentrations in breast milk and demographic parameters, except for ΣPBDE with maternal age and delivery mode. Certain types of diet such as corn, seafood and nut correlated significantly with PBDE levels in breast milk. The estimated daily intakes of ΣPBDE for breast-feeding infants were lower than the guidelines proposed by the US EPA, indicating limited health risk from PBDEs through breast feeding.

Mass balance evaluation of polybrominated diphenyl ethers in landfill leachate and potential for transfer from e-waste

Previous research on brominated flame retardants (BFRs), including polybrominated diphenyl ethers (PBDEs) has largely focussed on their concentrations in the environment and their adverse effects on human health. This paper explores their transfer from waste streams to water and soil. A comprehensive mass balance model is developed to track polybrominated diphenyl ethers (PBDEs), originating from e-waste and non-e-waste solids leaching from a landfill. Stepwise debromination is assumed to occur in three sub-systems (e-waste, aqueous leachate phase, and non-e-waste solids). Analysis of landfill samples and laboratory results from a solid-liquid contacting chamber are used to estimate model parameters to simulate an urban landfill system, for past and future scenarios. Sensitivity tests to key model parameters were conducted. Lower BDEs require more time to disappear than high-molecular weight PBDEs, since debromination takes place in a stepwise manner, according to the simplified reaction scheme. Interphase mass transfer causes the decay pattern to be similar in all three sub-systems. The aqueous phase is predicted to be the first sub-system to eliminate PBDEs if their input to the landfill were to be stopped. The non-e-waste solids would be next, followed by the e-waste sub-system. The model shows that mass transfer is not rate-limiting, but the evolution over time depends on the kinetic degradation parameters. Experimental scatter makes model testing difficult. Nevertheless, the model provides qualitative understanding of the influence of key variables.

Rapid and Extensive Debromination of Decabromodiphenyl Ether by Smectite Clay-Templated Subnanoscale Zero-Valent Iron

Subnanoscale zerovalent iron (ZVI) synthesized using smectite clay as a template was utilized to investigate reduction of decabromodiphenyl ether (DBDE). The results revealed that DBDE was rapidly debrominated by the prepared smectite-templated ZVI with a reaction rate 10 times greater than that by conventionally prepared nanoscale ZVI. This enhanced reduction is plausibly attributed to the smaller-sized smectite-templated ZVI clusters (∼0.5 nm) vs that of the conventional nanoscale ZVI (∼40 nm). The degradation of DBDE occurred in a stepwise debromination manner. Pentabromodiphenyl ethers were the terminal products in an alkaline suspension (pH 9.6) of smectite-templated ZVI, whereas di-, tri-, and tetrabromodiphenyl ethers formed at the neutral pH. The presence of tetrahydrofuran (THF) as a cosolvent at large volume fractions (e.g., >70%) in water reduced the debromination rates due to enhanced aggregation of clay particles and/or diminished adsorption of DBDE to smectite surfaces. Modification of clay surfaces with tetramethylammonium (TMA) attenuated the colsovent effect on the aggregation of clay particles, resulting in enhanced debromination rates. Smectite clay provides an ideal template to form subnanoscale ZVI, which demonstrated superior debromination reactivity with DBDE compared with other known forms of ZVIs. The ability to modify the nature of smectite clay surface by cation exchange reaction utilizing organic cations can be harnessed to create surface properties compatible with various contaminated sites.

Reductive Degradation of Tetrabromobisphenol Using Iron–Silver and Iron–Nickel Bimetallic Nanoparticles with Microwave Energy

In this work, a novel combined system by Fe-Ag or Fe-Ni nanoparticles and microwave (MW) radiation were used for the debromination of tetrabromobisphenol A (TBBPA) in aqueous solutions. Core-shell structure bimetallic nanoparticles were prepared by replacement reaction in liquid phase and then characterized by X-ray diffraction, transmission electron microscopy, and X-ray photoelectron spectroscopy techniques. MW radiation can enhance the degradation of TBBPA by Fe-Ag or Fe-Ni observably. The rate of reduction reactions for bimetallic nanoparticles under MW were first compared with those under conventional heating conditions. Compared with nano-iron, the deposition of Ag or Ni also accelerated the debromination, and Fe-Ag was more reactive than Fe-Ni toward TBBPA reduction. Removal efficiencies increased with increasing Fe-Ag dosage and MW energy level. Major reduction products of TBBPA identified by liquid chromatography-mass spectrometry/mass spectrometry (LC-MS/MS) were tri-BBPA, di-BBPA, mono-BBPA, and BPA, which indicated a stepwise debromination process. It provides an effective technology for TBBPA laden wastewater treatment.

Improved debromination of polybrominated diphenyl ethers by bimetallic iron–silver nanoparticles coupled with microwave energy

This study focused on the enhanced debromination of decabromodiphenyl ether (BDE-209) and 2,2′,4,4′-tetrabromodiphenyl ether (BDE-47) by Fe–Ag nano-particles under microwave radiation (Fe–Ag/MW). Fe–Ag bimetallic nano-particles were synthesized by reductive deposition of Ag on nano-iron and characterized with a number of techniques, including BET, XRD, TEM and XPS. Approximately 97% of BDE-209 or 78% of BDE-47 were rapidly transformed to its degradation products within 8min in the Fe–Ag/MW system. The dehalogenation efficiency of polybrominated diphenyl ethers (PBDEs) was enhanced apparently by microwave radiation. Moreover, the microwave thermal energy played a significant role in accelerating the degradation reactions. Compared with nano-iron alone, the deposition of Ag also increased the rates of degradation. GC–MS and LC–MS/MS analyses of PBDEs' degradation products reveals that the possible degradation pathway proceeds through stepwise debromination from [n]-bromo- to [n-1]-bromo-DE, with bromine being substituted by hydrogen sequentially. Di- to nona-brominated congeners were formed during BDE-209 reduction, while diphenyl ether to tri-BDEs were observed during BDE-47 degradation. These results suggest that PBDEs can be debrominated rapidly by the innovative processes that may be environmentally friendly in applications.

Debromination of Polybrominated Diphenyl Ethers by Nanoscale Zerovalent Iron: Pathways, Kinetics, and Reactivity

The debromination of selected polybrominated diphenyl ethers (PBDEs) by nanoscale zerovalent iron particles (nZVI) was studied to investigate the degradation pathways and the reaction kinetics of the PBDEs. The primary PBDE investigated was 2,3,4-tribromodiphenyl ether (BDE 21) to assess degradation pathways. nZVI could effectively debrominate the selected PBDEs into lower brominated compounds and diphenyl ether, a completely debrominated form of PBDEs. The susceptibility of the meta-bromine by nZVI was observed from the debromination tests for PBDEs with single-flanked (2,3-diBDE and 3,4-diBDE) and unflanked (three mono-BDEs) bromines. The stepwise debromination from n-bromo- to (n-1)-bromodiphenyl ether was observed as the dominant reaction process, although simultaneous multistep debromination seemed to be plausible for di-BDEs having two bromines adjacent on the same phenyl ring. The reaction rate constants were estimated by assuming the reaction between PBDEs and nZVI was a pseudo-first-order reaction and the rates decreased with fewer bromine substituents. The reaction rate constants were correlated with the heat of formation and the energy of the lowest unoccupied molecular orbital of the corresponding compounds, and these appear to be useful descriptors of relative reaction rates among PBDE homologue groups.

Influence of aromatic brominated flame retardants on alkane photo-oxidation: A model and polymer study

Photochemical decomposition of decabromodiphenyl ether ( I) induced by 300–400 nm light is a radical process leading to the formation of hydrobromic acid (HBr) provided there is a hydrogen donor (RH) in the system. The stepwise debromination of the aromatic ring takes place giving rise to lower brominated diphenyl ethers with a number of by-products. The hydrogen donor is converted to a corresponding R–Br derivative in this process. Free HBr is prone to photolytic decomposition, particularly at more advanced stages of conversion of ( I). As shown in the polypropylene case, the radicals thus formed can actively participate in the initiation step of polyolefin chain oxidation. In the presence of HALS the HBr formation through photolysis of ( I) is enhanced while the formation of R–Br is totally suppressed. The rate of disappearance of ( I) is, however, not influenced by the HALS. The enhancement of HBr formation by HALS is thus attributed to a deeper stepwise debromination of ( I) allowing release of more than one bromine radical per molecule of ( I). The detrimental effect of brominated diphenyl ethers on the polymer UV resistance thus stems from three main reasons: HBr formation which ruins the stabiliser performance through the formation of inactive aminium salt with HALS; photolysis of HBr as well as of ( I) that enhance the photoinitiation of alkane polymer photo-degradation.

Reductive Debromination of Polybrominated Diphenyl Ethers by Zerovalent Iron

Polybrominated diphenyl ethers (PBDEs) are a new class of global, persistent, and toxic contaminants, which need proper remediation technologies. PBDE degradation in the environment is not well understood. In this study, degradation of PBDEs with zerovalent iron was investigated with six BDEs, substituted with one to 10 bromines. Within 40 days 92% of BDE congener 209 was transformed into lower bromo congeners. During the initial reaction period of BDE 209 (<5 days), hexa- to heptabromo BDEs were the most abundant products, but tetra- to pentabromo congeners were dominant after 2 weeks. The amount of mono- to tribromo BDEs was steadily increased during the experiments. BDEs 28, 47, 66, and 100 also showed a stepwise accumulation of lower bromo congeners. No oxidation products were detected in all experiments. The results showed that a stepwise debromination from n-bromoto (n-1)-bromodiphenyl ethers was the dominant reaction in all congeners. The reaction rate constants of lower bromo BDEs decreased as the number of bromines decreased. The initial reductive debromination rate constants were positively correlated with the heats of formation of BDEs. The preferential accumulation of specific congeners was observed in the experiment with BDEs 28, 47, 66, and 100, where the most abundant products were BDEs 15, 28, 37, and 47, respectively. Reactions proceeded to form more stable and less brominated products that have lower heats of formation. Almost all the possible isomers from a specific parent BDE were found in all the experiments, which was probably due to the small difference of heat of formation between the products (2-5 kcal/mol). Reactions of all congeners proceeded fast at the initial phase (<5 days) followed by a slow reaction. The rate of reductive debromination of BDE 209 was slower with environmentally relevant sulfide minerals (iron sulfide and sodium sulfide). However, the product congener pattern, produced by sulfide mineral catalysis, was nearly similar with that of zerovalent iron treatment. This may be a possible source of lower brominated BDEs in the environment. Debromination of PBDEs by zerovalent iron has high potential values for remediation of PBDEs in the environment.

DSM BIOLOGICS TO BUILD NEW PLANT IN MONTREAL

Highly active and visible light-driven Ag-loaded CdS photocatalysts were prepared via a hydrothermal synthesis and photodeposition method. The removal and debromination of 2,2ʹ,4,4ʹ-tetrabromodiphenyl ether was achieved efficiently using this Ag-loaded CdS under visible light, with a removal efficiency of 100% and a debromination ratio of 44.3% being achieved within 30 min. Both the reaction solvent and the water content were found to have a strong influence on the removal efficiency and the debromination ratio. In addition, the stepwise debromination preference was ortho ≫ para, thereby indicating that the main debromination pathway was electron reduction. The stability and efficiency of these Ag-loaded CdS photocatalysts for the removal of BDE47 were satisfactory, and so our results confirmed the development of a promising visible light-driven catalyst for the removal of polybrominated diphenyl ethers.