Stem In Total Hip Arthroplasty Research Articles

Subsidence of the Corail stem in total hip arthroplasty: no influence of bony contact

IntroductionThis study investigated stem subsidence following primary total hip arthroplasty (THA) with a Corail stem in patients who underwent two-staged bilateral THA. The second outcome of interest was to investigate whether a specific single cortical bone contact point might reduce postoperative stem subsidence.MethodsThe present study was conducted following the STROBE guidelines. The records of patients who underwent THA between 2016 and 2023 were accessed. All patients who underwent two-staged bilateral THA were retrieved. The direct contact between the stem and the cortical bone was assessed at various points in the metaphysis and the distal portion of the stem (diaphysis) in both anteroposterior radiographs of the pelvis (medial and lateral bone contact) and a Lauenstein view of the hip (anterior and posterior bone contact). The following parameters were measured and compared to assess stem subsidence: distance from the proximal femur at the stem bone interface and the tip of the lesser trochanter (distance A); distance from the tip of the lesser trochanter and the tip of the femoral stem (distance B).ResultsIn total, 250 patients were included, 45% (149 of 250 patients) were women and 61% (153 of 250 THAs) were implanted primarily on the right side. The mean age of patients at the time of the first THA was 64.3 ± 10.0 years and the mean body mass index (BMI) was 28.0 ± 4.9 kg/m2. The mean length of the follow-up was 14.1 ± 10.8 months. The overall stem subsidence following THA was 2.8 ± 0.7 mm (P < 0.006). A direct cortical bone-implant contact did not exert a statistically significant difference in subsidence of the THA stem at the metaphysis and diaphysis (P > 0.5). Stem subsidence following THA with a collarless cementless Corail stem was approximately 2.8 mm at 14 months.ConclusionsDirect cortical bone contact of the stem at diaphysis and metaphysis seems not to influence stem subsidence following THA using the Corail stem.

Is there a difference in pelvic and femoral morphology in early periprosthetic femoral fracture in cementless short stem total hip arthroplasty via an anterolateral approach?

BackgroundThe pelvic and femoral morphology are associated with the occurrence of early periprosthetic femoral fractures (PFFs) in cementless total hip arthroplasty (THA). Differences exist depending on the performed approach and implanted stem design. Therefore, this study was conducted to analyze the pelvic and femoral morphology in cementless short stem THA via a minimally-invasive (MIS) anterolateral approach.MethodsA retrospective, single-center, multi-surgeon, comparative propensity-score matched study of a cohort of 1826 short stem THAs was conducted. A total of 39 PFFs within the first 90 days after surgery was matched on a 2:1 ratio to non-fracture patients. The morphology of the proximal femur was analyzed with canal flare index (CFI), canal-calcar ratio (CCR), canal-bone ratio (CBR), morphological cortical index (MCI), and femoral cortical index (CI). The pelvic morphology was analyzed with ilium–ischial ratio (IR), distance anterior superior iliac spine to the tip of the greater trochanter (AGT). Both groups were analyzed regarding several parameters for femoral and pelvic morphology in non-parametric testing and univariate regression analysis.ResultsA significantly higher AGT was detected in the fracture group (104.5 mm ± 18 versus 97.4 mm ± 9.8; p = 0.016). All other femoral and pelvic parameters did not differ between both groups, also when compared depending on the Vancouver type of the PFF.ConclusionsThe morphology of the proximal femur and the pelvis do not differ in several radiological parameters in patients sustaining a PFF in cementless short stem THA via an anterolateral approach compared with matched non-fracture group. The findings are controversial to other studies with different stem types and approaches. Future studies should focus on analyzing the influence of the pelvic geometry and the shape of the proximal femur in the occurrence of PFFs in different approaches with the same stem type and vice versa.Level of Evidence Level III case-controlled study

Leg length discrepancy risk differs between fit-and-fill and taper wedge stems across Dorr types.

The comparison between the cementless taper wedge stem and fit-and-fill stem in total hip arthroplasty (THA) for various proximal femoral morphological types has not been thoroughly assessed. This study aimed to compare the risk of leg length discrepancy (LLD) ≥ 10mm between these two stem types in Dorr type A, B, and C femurs. From April 2015 through April 2021, we analyzed 1178 unilateral primary cementless THA procedures. We categorized all procedures into three groups: Dorr type A (N = 220, 18.7%), B (N = 875, 74.3%), and C (N = 83, 7.0%). Within each Dorr type, we compared the incidence and risk of postoperative LLD ≥ 10mm between the two stem types. The factors considered in the multivariate regression analyses included stem type, age, sex, body mass index, diagnosis, canal flare index, femoral cortical index and stem alignment. The taper wedge stem group had a higher overall incidence of LLD ≥ 10mm (12.8% vs. 7.4%, P = 0.012) and in Dorr type A femurs (22.2% vs. 7.6%, P = 0.014), compared with the fit-and-fill stem group. In multivariate analysis, the taper wedge stem exhibited an increased risk of LLD ≥ 10mm only in Dorr type A femurs (aOR: 3.449, 95% CI: 1.325-8.794). The incidence and risk of LLD ≥ 10mm were not different between the two stems in Dorr type B and C femurs. The taper wedge stem demonstrated an elevated risk of LLD ≥ 10mm in Dorr type A femurs compared with the fit-and-fill stem, necessitating meticulous preoperative templating and intraoperative femoral canal preparation.

Adjustment of stem anteversion using tapered cone stem in total hip arthroplasty.

The aim of this study was to evaluate the suitability of the tapered cone stem in total hip arthroplasty (THA) in patients with excessive femoral anteversion and after femoral osteotomy. We included patients who underwent THA using Wagner Cone due to proximal femur anatomical abnormalities between August 2014 and January 2019 at a single institution. We investigated implant survival time using the endpoint of dislocation and revision, and compared the prevalence of prosthetic impingements between the Wagner Cone, a tapered cone stem, and the Taperloc, a tapered wedge stem, through simulation. We also collected Oxford Hip Score (OHS), visual analogue scale (VAS) satisfaction, and VAS pain by postal survey in August 2023 and explored variables associated with those scores. Of the 58 patients (62 hips), two (two hips) presented with dislocation or reoperation, and Kaplan-Meier analysis indicated a five-year survival rate of 96.7% (95% CI 92.4 to 100). Mean stem anteversion was 35.2° (SD 18.2°) for the Taperloc stem and 29.8° (SD 7.9°) for the Wagner Cone stem; mean reduction from Taperloc to Wagner Cone was 5.4° (SD 18.8°). Overall, 55 hips (52 patients) were simulated, and the prevalence of prosthetic impingement was lower for the Wagner Cone (5.5%, 3/55) compared with the Taperloc (20.0%, 11/55) stem, with an odds ratio of 0.20 (p = 0.038). Among the 33 respondents to the postal survey (36 hips), the mean scores were VAS pain 10.9, VAS satisfaction 86.9, and OHS 44.7. A multivariable analysis revealed that reduction of stem anteversion from Taperloc to Wagner Cone was more favourable for VAS pain (p = 0.029) and VAS satisfaction (p = 0.002). The mid-term survival rate for THA using the Wagner Cone stem was high, which may be supported by a reduction in prosthetic impingement. The reduction in excessive stem anteversion by using a tapered cone stem was associated with reduced pain and increased patient satisfaction.

Single-Taper Conical Tapered Stem in Total Hip Arthroplasty for Primary Osteoarthritis: A Comparative Long-Term Registry Evaluation.

Background/Objectives: Single-taper conical tapered stems (STCTSs) are possible options for femoral reconstruction in THA performed for primary osteoarthritis, but outcomes are poorly ascertained. A specific STCTS in THA performed for primary osteoarthritis was investigated and compared to a control group including all the other cementless stems, aiming to assess the following: (1) the survival rates of the two cohorts and the hazard ratios for failure; (2) the survival rates and the hazard ratios for failures for stem failure, stem aseptic loosening, and periprosthetic fracture. Methods: A regional arthroplasty registry study evaluating a specific STCTS in THA performed for primary osteoarthritis was designed. A control group including all the other cementless stems was considered. Results: In total, 1773 STCTSs were compared to 37,944 cementless stems. The cumulative survivorship of the STCTS cohort was 95.6% at 10 years and 92.7% at 15 years, which was not different to the control group (p = 0.252). After age stratification, the hazard ratio for STCTS failure was not different to the control group. With stem revision as the endpoint, the STCTS cohort outperformed the control group (at 10 years, 98% versus 96.8%; p < 0.001). The STCTSs achieved better survival rates in females <65 years (p = 0.023). With stem aseptic loosening as the endpoint, the survival rates did not differ between the two cohorts (p = 0.085), as well as the adjusted hazard ratios (p = 0.264). With periprosthetic fracture as the endpoint, the survival rates were better for the STCTSs (p < 0.001). Conclusions: STCTSs in THA for primary osteoarthritis provided dependable long-term outcomes, not inferior to all the other cementless stems with various designs.

Learning curve comparison between switching approach and switching implant in cementless short stem total hip arthroplasty.

Implementing new approaches or new implants is always related with a certain learning curve in total hip arthroplasty (THA). Currently, many surgeons are switching to minimally invasive approaches combined with short stems for performing THA. Therefore, we aimed to asses and compare the learning curve of switching from an anterolateral Watson Jones approach (ALA) to a direct anterior approach (DAA) with the learning curve of switching from a neck-resecting to a partially neck-sparing short stem in cementless THA. The first 150 consecutive THA performed through a DAA (Group A) and the first 150 consecutive THA using a partially neck-sparing short stem (Group B) performed by a single surgeon were evaluated within this retrospective cohort study. All cases were screened for surgery related adverse events (AE). Furthermore, the operative time of each surgery was evaluated and the learning curve assessed performing a cumulative sum (CUSUM) analysis. Overall, significantly more AE occurred in Group A compared to Group B (18.0% vs. 10.0%; p = 0.046). The sub-analysis of the AE revealed higher rates of periprosthetic joint infections (2.7% vs. 0.7%; p = 0.176), periprosthetic fractures (4.0% vs. 2.0%; p = 0.310) and overall revisions (4.7% vs. 1.3% p = 0.091) within Group A without statistical significance. The CUSUM analysis revealed a consistent reduction of operative time after 97 cases in Group A and 79 cases in Group B. A significantly higher overall rate of AE was detected while switching approach compared to switching implant for performing THA. However, according to the results of this study, surgeons should be aware of the learning curve of the adoption to a new implant with different fixation philosophy as well.

The medullary cavity morphology of the proximal femur influences the fixation pattern of the rectangular tapered short stem in total hip arthroplasty.

This study aimed to evaluate differences in the pattern of fixation with a rectangular tapered short stem (Fitmore stem) due to proximal femoral medullary cavity morphology based on periprosthetic bone mineral density (BMD) and radiological findings. We analyzed 105 consecutive patients (Dorr type A, 18; Dorr type B, 66; Dorr type C, 21) who underwent total hip arthroplasty using a Fitmore stem. Periprosthetic BMD was measured using dual-energy X-ray absorptiometry from 1 to 24months postoperatively and radiological analysis was performed. Clinical outcomes were evaluated using the Harris hip score (HHS) and the University of California Los Angeles (UCLA) activity score preoperatively and 24months postoperatively. At 24months postoperatively, Dorr type C had significantly decreased BMD changes in Gruen zones 2, 6, and 7 compared to Dorr types A and B, and conversely, significantly increased BMD changes in zone 4 (p < 0.05). Dorr type C had significantly greater subsidence than the other types (p < 0.01) and significantly higher cortical hypertrophy in zone 3 (p < 0.01). Stress shielding was not significantly different between Dorr types. The preoperative and postoperative HHS and UCLA activity scores showed no significant differences between the Dorr types. In Dorr type C, BMD significantly decreased in the proximal femur with a rectangular tapered short stem, suggesting that the stem was fixed at the distal part. Careful observation of this prosthesis over time is needed in patients with Dorr type C.

Cementless short stem total hip arthroplasty in patients older than 75 years: is it feasible?

BackgroundIn recent years, the indication for cementless short stem total hip arthroplasty (THA) has been widened to elderly patients as they might profit by the advantages of the short-curved implant design as well. Therefore, this study was conducted to evaluate the clinical and radiological outcome of a cementless short stem in elderly patients (≥ 75 years) compared to a young control group (≤ 60 years).MethodsA retrospective cohort of 316 THAs performed between 2014 and 2017 was prospectively examined. In all patients a cementless, curved short stem and press-fit cup (Fitmore® stem; Allofit®/-S cup; both ZimmerBiomet, Warsaw, IN, USA) were implanted via a minimally-invasive anterolateral approach. Clinical and radiological outcome as well as rate of complications and revision were assessed.ResultsIn total, 292 patients have been included for analysis of complications and revisions (Øfollow-up: 4.5 years) and 208 patients for clinical and radiological outcome (Øfollow-up: 4.4 years). Complication rate was significantly increased in elderly patients (13.7% vs. 5.8%, p = 0.023), while the revision rate was increased without statistical significance (5.2% vs. 2.2%, p = 0.169). Periprosthetic fractures occurred significantly higher in the elderly patients (5.2% vs. 0.7%; p = 0.026). Both groups showed a comparable clinical outcome in the Harris Hip Score (93.7 vs. 91.9; p = 0.224), Oxford Hip Score (44.5 vs. 43.7; p = 0.350), Forgotten Joint Score (81.7 vs. 81.5; p = 0.952) and WOMAC (7.4 vs. 9.3; p = 0.334).ConclusionCementless short stem total hip arthroplasty shows a comparable clinical and radiological outcome in patients over 75 years of age compared to younger patients under 60 years of age. However, cementless shorts stem THA shows an increased rate of overall complications and periprosthetic fractures in elderly patients over 75 years of age. Cemented fixation of the femoral component should be considered in patients over 75 years of age.Level of evidenceIII Case-controlled study.Trial registrationObservational study without need for trial registration due to ICMJE criteria.

Increased stability of short femoral stem through customized distribution of coefficient of friction in porous coating

Stress shielding and aseptic loosening are complications of short stem total hip arthroplasty, which may lead to hardware failure. Stems with increased porosity toward the distal end were discovered to be effective in reducing stress shielding, however, there is a lack of research on optimized porous distribution in stem’s coating. This study aimed to optimize the distribution of the coefficient of friction of a metaphyseal femoral stem, aiming for reducing stress shielding in the proximal area. A finite element analysis model of an implanted, titanium alloy short-tapered wedge stem featuring a porous coating made of titanium was designed to simulate a static structural analysis of the femoral stem's behavior under axial loading in Analysis System Mechanical Software. For computational feasibility, 500 combinations of coefficients of friction were randomly sampled. Increased strains in proximal femur were found in 8.4% of the models, which had decreased coefficients of friction in middle medial areas of porous coating and increased in lateral proximal and lateral and medial distal areas. This study reported the importance of the interface between bone and middle medial and distal lateral areas of the porous coating in influencing the biomechanical behavior of the proximal femur, and potentially reducing stress shielding.

The cementless taper wedge vs. fit-and-fill stem in primary total hip arthroplasty: risk of stem-related complication differs across Dorr types.

The choice between a cementless taper wedge stem and a fit-and-fill stem in total Hip arthroplasty (THA) for various proximal femoral morphological types has not been thoroughly evaluated. This study aimed to compare the risk of stem-related complications between these two stem types in Dorr type A, B, and C femurs. From January 2015 through April 2021, we retrospectively reviewed 1995 cementless THA procedures. We stratified all procedures into three groups: Dorr type A (N = 360, 18.0%), B (N = 1489, 74.7%) and C (N = 146, 7.3%). The primary outcome domain was stem-related complications, including stem subsidence ≥ 3mm, intraoperative fracture, periprosthetic fracture and aseptic stem loosening. We performed multivariate regression analysis to compare the risk of stem-related complication between the two stem types. Other factors included age, sex, body mass index, diagnosis, age-adjusted Charlson comorbidity index, stem alignment and canal fill ratio. The incidence of stem-related complications in the taper wedge and fit-and-fill stem groups was 4.4% (N = 15) and 6.5% (N = 107), respectively. Fit-and-fill stems showed an increased risk of stem-related complications (aOR: 9.903, 95% CI: 1.567-62.597) only in Dorr type C femurs. No significant difference in risk was observed in Dorr type A and B femurs. Furthermore, the canal fill ratio at the lesser trochanter, 2cm and 7cm below the lesser trochanter, did not exhibit an association with stem-related complications in any Dorr type. Concerning the risk of stem-related complications, the taper wedge stem was a better choice in Dorr type C femurs. However, there was no difference in risk between the taper wedge stem and fit-and-fill stem in Dorr type A and B femurs.

DOES AN INTRAOPERATIVE FEMORAL FRACTURE IMPACT ONE-YEAR PATIENT-REPORTED OUTCOME MEASURES WHEN USING A CEMENTLESS CORAIL STEM?

The significance of periprosthetic fractures about a total hip arthroplasty (THA) is becoming increasingly important. Recent studies have demonstrated post-operative periprosthetic fracture rates are higher amongst cemented polished taper slip (PTS) stem designs compared to collared cementless (CC) designs.However, in the National Joint Registry, the rate of intra-operative periprosthetic femoral fractures (IOPFF) with cementless implant systems remains higher (0.87% vs 0.42%. p &lt;0.001) potentially leading to more post-operative complications.This study identifies the incidence of IOPFF, the fracture subtype and compares functional outcomes and revision rates of CC femoral implants with an IOPFF to CC stems and PTS stems without a fracture.5376 consecutive CC stem THA, carried out through a posterior approach were reviewed for IOPFF. Each fracture was subdivided into calcar fracture, greater trochanter (GT) fracture or shaft fracture.1:1:1 matched analysis was carried out to compare Oxford scores at one year. Matching criteria included; sex (exact), age (± 1 year), American Society of Anaesthesiologists (ASA) grade (exact), and date of surgery (± 6 months).Electronic records were used to review revision rates.Following review of the CC stems, 44 (0.8%) were identified as having an IOPFF. Of these 30 (0.6%) were calcar fractures, 11 (0.2%) GT fractures and 3 (0.06%) were shaft fractures. There were no shaft penetrations.Overall, no significant difference in Oxford scores at one year were observed when comparing the CC IOPFF, CC non-IOPFF and PTS groups.There were no CC stems revised for any reason with either a calcar fracture or trochanteric fracture within the period of 8 years follow-up.IOPFF do occur more frequently in cementless systems than cemented. The majority are calcar and GT fractures. These fractures, when identified and managed intra-operatively, do not have worse functional outcomes or revision rates compared to matched non-IOPFF cases.

Effects of Abaloparatide on Bone Mineral Density in Proximal Femoral Regions Corresponding to Arthroplasty Gruen Zones: A Study of Postmenopausal Women with Osteoporosis.

Low hip bone mineral density (BMD) in patients who undergo total hip arthroplasty (THA) increases the risk of periprosthetic fractures, implant instability, and other complications. Recently, emphasis has been placed on bone health optimization: treating low BMD prior to a planned orthopaedic implant procedure in an effort to normalize BMD and reduce the potential risk of future complications. Abaloparatide is a U.S. Food and Drug Administration-approved osteoanabolic agent for men and postmenopausal women with osteoporosis and a candidate drug for bone health optimization that, in addition to benefits at the spine, increases hip BMD and reduces nonvertebral fracture risk. We hypothesized that abaloparatide would improve BMD in proximal femoral regions surrounding a virtual THA stem. This post hoc analysis obtained dual x-ray absorptiometry (DXA) hip scans from 500 randomly selected postmenopausal women with osteoporosis from the Phase-3 Abaloparatide Comparator Trial in Vertebral Endpoints (ACTIVE, NCT01343004) study after 0, 6, and 18 months of abaloparatide (250 patients) or placebo (250 patients). Hip DXA scans underwent 3-dimensional (3D) modeling via 3D-Shaper, followed by virtual resection of the proximal femur and simulated placement of a tapered, flat-wedge hip stem that guided delineation of the Gruen zones that were fully (zones 1 and 7) or largely (zones 2 and 6) captured in the scanning region. Integral, cortical, and trabecular volumetric BMD, cortical thickness, and cortical surface BMD (the product of cortical volumetric BMD and cortical thickness) were determined for each zone. Compared with placebo, the abaloparatide group showed greater increases in integral volumetric BMD in all zones at months 6 and 18; cortical surface BMD in zones 1, 6, and 7 at month 6; cortical thickness, cortical volumetric BMD, and cortical surface BMD in all zones at month 18; and trabecular volumetric BMD in zones 1 and 7 at months 6 and 18. Abaloparatide increases BMD in proximal femoral regions that interact with and support femoral stems, suggesting that abaloparatide may have value for preoperative or potentially perioperative bone health optimization in patients with osteoporosis undergoing THA. Therapeutic Level III . See Instructions for Authors for a complete description of levels of evidence.

Revision of Failed Short Stems in Total Hip Arthroplasty.

Background: The current literature lacks studies which evaluate the failure of short stems in total hip arthroplasty (THA). Therefore, the present clinical investigation reported our experience with the failure of short stems in THA, evaluating the causes of failure, survivorship, and the clinical outcomes of revision arthroplasty. Methods: The present study was performed according to the STROBE guidelines. This study was conducted at the Department of Orthopaedic Surgery of the Humanitas Clinical Institute, Milan, Italy, between 2017 and 2022. All patients who underwent revision surgery of a previously implanted THA using a short stem were prospectively included in the present study. Surgeries were performed with patients in lateral position, using a minimally invasive posterolateral approach. The outcomes of interest were to report information on the type and survivorship of implants used for the revision surgery and evaluate the clinical outcomes and the rate of complications. The following patient-reported outcome measures (PROMs) used for the clinical assessment were the Western Ontario McMaster Osteo-Arthritis Index (WOMAC) and related subscales of pain, stiffness, and function, and the visual analogue scale (VAS). Results: Data from 45 patients were retrieved. Of them, 31% (14 of 45 patients) were women. The mean age was 63.7 ± 13.9 years. The mean length of the implant survivorship was 6.2 ± 5.7 years. In total, 58% (26 of 45 patients) underwent revision of all components, 36% (16 of 45 patients) revised only the stem, and 1% (3 of 45 patients) received a two-stage revision. The mean length of the follow-up was 4.4 ± 1.5 years. The cup was revised in 58% (26 of 45) of patients. At 4.4 ± 1.5 years of follow-up, the WOMAC score was 3.5 ± 1.3 and the VAS was 1.2 ± 1.3. In total, 9% (4 of 45) of patients experienced minor complications. One patient used a walking aid because of reduced function. One patient evidenced muscular hypotrophy. Two patients experienced hip dislocations. All two dislocations were managed conservatively with repositioning in the emergency room under fluoroscopy. No patient needed additional revision surgery or experienced further dislocations. Conclusions: Revision surgery is effective and safe when a short stem THA fails. At approximately four years of follow-up, all patients were highly satisfied with their clinical outcomes. Despite the relatively high number (9%), complications were of a minor entity and were successfully managed conservatively.

Equivalent revision rates and patient reported outcomes with routine use of a short (125mm) cemented stem for total hip arthroplasty compared to a standard length (150mm) cemented stem. A two surgeon series of 1335 patients.

Routine total hip arthroplasty (THA) using a short cemented stem as compared with a standard length cemented stem may have benefits in terms of stress distribution, bone preservation, stem subsidence and ease of revision surgery. Two senior arthroplasty surgeons transitioned their routine femoral implant from a standard 150mm Exeter V40 cemented stem to a short 125mm Exeter V40 cemented stem for all patients over the course of several years. We analysed revision rates, adjusted survival, and PROMS scores for patients who received a standard stem and a short stem in routine THA. All THAs performed by the two surgeons between January 2011 and December 2021 were included. All procedures were performed using either a 150mm or 125mm Exeter V40 stem. Demographic data, acetabular implant type, and outcome data including implant survival, reason for revision, and post-operative Oxford Hip Scores were obtained from the New Zealand Joint Registry (NZJR), and detailed survival analyses were performed. Primary outcome was revision for any reason. Reason for revision, including femoral or acetabular failure, and time to revision were also recorded. 1335 THAs were included. 516 using the 150mm stem and 819 using the 125mm stem. There were 4055.5 and 3227.8 component years analysed in the standard stem and short stem groups respectively due to a longer mean follow up in the 150mm group. Patient reported outcomes were comparable across all groups. Revision rates were comparable between the standard 150mm stem (0.44 revisions/100 component years) and the short 125mm stem (0.56 revisions/100 component years) with no statistically significant difference found (p = 0.240). Routine use of a short 125mm stem had no statistically significant impact on revision rate or PROMS scores when compared to a standard 150mm stem. There may be benefits to routine use of a short cemented femoral implant.

Long-term follow-up of an uncemented proximally hydroxyapatite-coated femoral stem in total hip arthroplasty.

The aim of this study was to evaluate the survival of a collarless, straight, hydroxyapatite-coated femoral stem in total hip arthroplasty (THA) at a minimum follow-up of 20 years. We reviewed the results of 165 THAs using the Omnifit HA system in 138 patients, performed between August 1993 and December 1999. The mean age of the patients at the time of surgery was 46 years (20 to 77). Avascular necrosis was the most common indication for THA, followed by ankylosing spondylitis and primary osteoarthritis. The mean follow-up was 22 years (20 to 31). At 20 and 25 years, 113 THAs in 91 patients and 63 THAs in 55 patients were available for review, respectively, while others died or were lost to follow-up. Kaplan-Meier analysis was performed to evaluate the survival of the stem. Radiographs were reviewed regularly, and the stability of the stem was evaluated using the Engh classification. A total of seven stems (4.2%) were revised during the study period: one for aseptic loosening, three for periprosthetic fracture, two for infection, and one for recurrent dislocation. At 20 years, survival with revision of the stem for any indication and for aseptic loosening as the endpoint was 96.0% (95% confidence interval (CI) 92.6 to 99.5) and 98.4% (95% CI 96.2 to 100), respectively. At 25 years, the corresponding rates of survival were 94.5% (95% CI 89.9 to 99.3) and 98.1% (95% CI 95.7 to 99.6), respectively. There was radiological evidence of stable bony fixation in 86 stems (76.1%) and evidence of loosening in four (3.5%) at 20 years. All patients with radiological evidence of loosening were asymptomatic. The Omnifit HA femoral stem offered promising long-term survival into the third decade.

Biomechanics of a collum-fixated short stem in total hip arthroplasty

BackgroundBiomechanical reconstruction of the hip significantly impacts the clinical outcome and implant survival. Our knowledge is limited of the ability of neck-stabilised prostheses to restore hip biomechanics. We hypothesised that hip biomechanics, specifically leg length and global offset (GO), may be restored to an acceptable range using the Primoris™ stem. Methods and materialIn this retrospective study, we analysed 152 patients who underwent total hip replacement (THA) using the short collum-fixated stem Primoris™.The primary outcomes were hip parameters measured by x-ray following THA using the Primoris™ stem. After surgery, the biomechanical parameters used were measured at the arthroplasty and the native contralateral side of the same x-ray. The X-rays were taken one year after the patient's surgery.1. GO.2. Leg length discrepancy (LLD).3. Neck shaft angle (NSA). ResultsWe recorded an average GO of −3.4 mm (standard deviation (SD) 7.2) and an average LLD of +3.8 mm (SD 6.4). Furthermore, we registered an average 14-degree NSA increase (SD 7.4). ConclusionThe Primoris™ neck-stabilised stem enabled hip anatomy restoration to a favourable range with respect to GO and LLD as the average difference fell within ±5 mm. However, the stem tended to be implanted in valgus.

Mid-term results of total hip arthroplasty with anatomical ultra-short cementless stem in patients with developmental dysplasia of the hip Crowe type II

The aim of this study was to present the mid-term results of ultra-short cementless stem total hip arthroplasty (THA) in patients with Crowe type II developmental dysplasia of the hip. The study consists of 68 patients (75 THAs) with a Proxima stem implanted between 2006 and 2015. The clinical results include Harris Hip Scores. Radiological follow-up reports on stem migration, bony trabecular development and radiolucent lines. Kaplan–Meier survival analysis was performed. The mean age of patients was 48.4 years, with a mean follow-up 114 months. The average Harris Hip Score improved significantly from 45.1 preoperatively to 97.6 at the final evaluation (p < 0.001). Stem migration was observed in five hips (in all of them up to the 6th postoperative month, without any further progression of migration or radiological loosening). Bony trabecular development was detected in modified Gruen zones (1, 2, 4, 6, 7 for Proxima stem): in zone 1 (0%), 2 (49.3.0%), 4 (38.7%), 6 (82.7%), 7 (0%). Radiolucent lines were observed around one cup (DeLee and Charnley zone I) and three stems (none was loose, all three with fibrous stable fixation). Complications were found in three hips (4.0%): intraoperative periprosthetic femoral fracture (threated with cerclage wire) in two hips and squeezing hip in one patient (with perioperative ceramic inlay breakage and exchange). No hip was revised. The implant survival was 100.0% both clinically and radiologically. Observations in the mean follow-up of 114 months show that the results (clinical and radiological) of the Proxima stem in patients with Crowe type II DDH are promising.

Comparison between model-based RSA and an AI-based CT-RSA: an accuracy study of 30 patients.

Radiostereometry (RSA) is the current gold standard for evaluating early implant migration. CT-based migration analysis is a promising method, with fewer handling requirements compared with RSA and no need for implanted bone-markers. We aimed to evaluate agreement between a new artificial intelligence (AI)-based CT-RSA and model-based RSA (MBRSA) in measuring migration of cup and stem in total hip arthroplasty (THA). 30 patients with THA for primary osteoarthritis (OA) were included. RSA examinations were performed on the first postoperative day, and at 2 weeks, 3 months, 1, 2, and 5 years after surgery. A low-dose CT scan was done at 2 weeks and 5 years. The agreement between the migration results obtained from MBRSA and AI-based CT-RSA was assessed using Bland-Altman plots. Stem migration (y-translation) between 2 weeks and 5 years, for the primary outcome measure, was -0.18 (95% confidence interval [CI] -0.31 to -0.05) mm with MBRSA and -0.36 (CI -0.53 to -0.19) mm with AI-based CT-RSA. Corresponding proximal migration of the cup (y-translation) was 0.06 (CI 0.02-0.09) mm and 0.02 (CI -0.01 to 0.05) mm, respectively. The mean difference for all stem and cup comparisons was within the range of MBRSA precision. The AI-based CT-RSA showed no intra- or interobserver variability. We found good agreement between the AI-based CT-RSA and MBRSA in measuring postoperative implant migration. AI-based CT-RSA ensures user independence and delivers consistent results.

Gender differences in cementless short stem total hip arthroplasty: significantly higher femoral lengthening in female patients

Modern cementless short stems in total hip arthroplasty (THA) enable a precise reconstruction of the native pre-arthritic hip geometry. While gender differences have been reported for older generation straight hip stems, there are hardly reports regarding modern cementless short hip stems. Therefore, we aimed to evaluate the influence of gender differences in hip anatomy in cementless short stem THA. A total of 207 patients (109 females, 98 males) with unilateral THA and absence of contralateral joint space narrowing (Kellgren-Lawrence grade ≤ 2) were included. Acetabular height and offset as well as femoral height and offset were measured on pre- and 3-months-postoperative anteroposterior X-rays of the pelvis and compared to the contralateral hip. Additionally, implant position was evaluated on the postoperative radiograph. In male patients, the loss of acetabular offset was significantly greater than in females (p = 0.012), leading to a compensatory increase in femoral offset (p = 0.041). Femoral height discrepancy was significantly higher in females (p < 0.001), accounting for an increased global hip height discrepancy (p < 0.001). The mean acetabular anteversion was significantly greater in female patients (p < 0.001). Female patients are at higher risk of femoral lengthening in THA with a cementless short stem potentially caused by a further proximally conducted femoral neck osteotomy and show significantly higher cup anteversion angles. Therefore, surgeons should take special care to the level of neck resection and implant positioning in female patients.

Chronological Changes in Sagittal Femoral Bowing after Primary Cementless Total Hip Arthroplasty: A Comparative 3D CT Study.

Little is known about dynamic changes of femoral anatomy after total hip arthroplasty (THA), in particular about sagittal femoral bowing (SFB). A 3D CT study was designed to evaluate the chronological changes of SFB after cementless femoral stem implantation for primary THA. Ten patients who underwent unilateral primary THA with a cementless femoral stem, with 2 consecutive CT scans (extending from the fourth lumbar vertebra to the tibial plateaus), performed before THA and at least 3 years after THA, were enrolled. The 3D models of femurs were created using image segmentation software. Using the two CT scans, SFB values of the proximal and middle thirds were calculated on the replaced and untreated sides by two different observers. Eight anatomical stems and two conical stems were involved. The post-operative CT was performed at an average follow-up of 6.5 years after THA (range: 3-12.5). The measurements performed by the two observers did not differ in the proximal and middle regions. A significant difference between the pre-operative and post-operative SFB compared to the untreated side was found in the proximal femur segment (p = 0.004). Use of a cementless stem in THA induced chronological changes in SFB of the proximal femur, after a minimum timespan of 3 years.