Stem Diameter Measurements Research Articles

Differential determinants of growth rates in subtropical evergreen and deciduous juvenile trees: carbon gain, hydraulics and nutrient-use efficiencies.

Growth rate varies across plant species and represents an important ecological strategy for competition, resource-use and fitness. However, empirical studies often show a low predictability of functional traits to tree growth. We measured stem diameter and height growth rates (DGRs and HGRs) of 96 juvenile trees (2-5m tall) of eight evergreen and eight deciduous broadleaf tree species over three consecutive years in a subtropical forest in south-western China. We examined the relationships between tree growth rates and 20 leaf/stem traits that are associated with carbon gain, stem hydraulics and nutrient-use efficiency, as well as the difference between evergreen and deciduous trees. We found that cross-species variations of stem DGR/HGR can be predicted by leaf photosynthetic capacity, leaf mass per area, xylem-theoretical-specific hydraulic conductivity, wood density (WD) and photosynthetic-nutrient-use efficiencies. Higher leaf carbon assimilation and lower leaf/stem constructing costs facilitate deciduous species to be more resource acquisitive and consequently faster growth within a relatively shorter growing season, whereas evergreen species exhibit more conservative strategies and thus slower growth. Furthermore, stem growth rates of evergreen species showed were more dependence on leaf carbon gains, whereas stem hydraulic efficiency was more important for deciduous tree growth. Our results suggest that physiological traits (photosynthesis, hydraulics and nutrient-use efficiency) can predict tree diameter and height growth of subtropical tree species. The differential resource acquisition and use strategies and their associations with tree growth between evergreen and deciduous trees provide insights into explaining the coexistence of evergreen and deciduous tree species in subtropical forests.

An early exploration of the use of the Microsoft Azure Kinect for estimation of urban tree Diameter at Breast Height

ABSTRACT Forest and urban tree inventory measurements are increasingly adopting Remote Sensing (RS) techniques due to the accurate and rapid estimates available compared to conventional methods. The focus of this study is to assess the accuracy and potential application of the Microsoft Azure Kinect – a lightweight depth sensor – for outdoor measurement of tree stem Diameter at Breast Height (DBH). Individual urban trees (n = 51) were recorded from one viewing angle at a distance of 1 m to 5 m away using the various Field of View (FOV) settings on the depth sensor, from which resultant point clouds provided DBH estimates using a circle-fitting approach. The optimal capture method was observed at a distance of 2 m using the binned Near Field of View (NFOV) setting. Root Mean Square Error (RMSE) of DBH using this method was 8.43 cm; however, after removing trees with irregular or non-circular stems, this improved to 3.53 cm. Variations in ambient light were observed to have little effect on DBH estimates. The results of this study suggest when in an outdoor environment, the Azure Kinect should be used at a distance no greater than 3 m away, using the binned NFOV sensor setting, for DBH estimates.

The Dynamics of Annonaceae Plants Collection and Its Conservation Efforts in Purwodadi Botanic Garden

Plant species of Annonaceae family were collected in Purwodadi Botanic Garden (PBG) needs ex-situ conservation efforts to prevent threat of extinction. Annonaceae plants collection in PBG have experienced dynamics over the past of 12 years which affect to diversity and conservation efforts. This study aimed to determine the dynamics or development of Annonaceae plants collection in PBG for the past of 12 years and how their conservation efforts. The methods were used are primary and secondary data collections from Registration Unit, measurement of stem diameter, plant height, branch-free stem height (BFS) of Annonaceae plants collection and microclimatic data (temperature, humidity, soil pH and light intensity) in each block of Annonaceae plants collection. Data were analyzed descriptively and by Principal Component Analysis using the statistical program PAST 4.0. The Annonaceae plant collections in PBG have fluctuated in the number of plants, genera, species, specimens and unidentified species with the addition of 28, 10, 6, 58, and 7 plants respectively. There were also 81 times of species identity changes. Annonaceae plant collections in PBG was able to well adapt and develop based on the average of stem diameter and BFS, with humidity and light intensity became the most influential environmental factors for plant growth. The management of Annonaceae plant collections in PBG consisted of the maintenance activities and studies to support the conservation. By regulating and manipulating of humidity and light intensity in Annonaceae plant collections, plant growth will increase and well maintenance. Management efforts can be planned and developed properly by knowing the dynamics of plant collections.

Robotic Detection and Grasp of Maize and Sorghum: Stem Measurement with Contact

Frequent measurements of the plant phenotypes make it possible to monitor plant status during the growing season. Stem diameter is an important proxy for overall plant biomass and health. However, the manual measurement of stem diameter in plants is time consuming, error prone, and laborious. The use of agricultural robots to automatically collect plant phenotypic data for trait measurements can overcome many of the drawbacks of manual phenotyping. The objective of this research was to develop a robotic system that can automatically detect and grasp the stem, and measure its diameter of maize and sorghum plants. The robotic system comprises of a four degree of freedom robotic manipulator, a time-of-flight camera for vision system, and a linear potentiometer sensor to measure the stem diameter. Deep learning and conventional image processing were used to detect stem in images and find grasping point of stem, respectively. An experiment was conducted in a greenhouse using maize and sorghum plants to evaluate the performance of the robotic system. The system demonstrated successful grasping of stem and a high correlation between manual and robotic measurements of diameter depicting its ability to be used as a prototype to integrate other sensors to measure different physiological and chemical attributes of the stem.

Application of resistance drilling to genetic studies of growth, wood basic density and bark thickness in Eucalyptus globulus

ABSTRACT Tree breeders are increasingly using resistance drilling (RESI) for the non-destructive assessment of wood basic density, but its application to the measurement of stem diameter at breast height (DBH) and bark thickness is less reported. Using Eucalyptus globulus progeny trials established with open-pollinated families from native trees representing 13 subraces, and adjusting bark thickness for its inherent phenotypic relationship with DBH, we: (1) quantified the genetic correlation between RESI and analogous traditional measurements of these traits; and (2) studied their genetic architecture and associations with subrace home-site climate. Significant variation was detected for all traditional and RESI-derived traits at the family and subrace level. High family and subrace-level correlations (>0.90) were found between RESI and traditional methods for all three traits. Bark thickness exhibited among the highest subrace differentiation (QST > 0.63) reported to date for E. globulus, signalling divergent selection. Increasing bark thickness was positively associated with home-site temperature annual range and seasonality. Although subrace differentiation for wood density (RESI and traditional measures) was less (QST = 0.18–0.21), a similar climate association was detected, and the subrace-level correlation with bark thickness was positive and significant (0.61–0.75). However, the non-significant correlations between bark thickness and wood density at the family level suggest that selective covariance rather than pleiotropy have caused the correlated patterns of subrace variation. Variation in bark thickness (adjusted) and wood density was independent of DBH at the family and subrace level. Given the importance of these traits, RESI provides a useful approach for non-destructive assessments for silvicultural, genetics and ecological studies of forest trees.

Legacy of Amazonian Dark Earth soils on forest structure and species composition

AbstractAimAmazonian forests predominantly grow on highly weathered and nutrient poor soils. Anthropogenically enriched Amazonian Dark Earths (ADE), traditionally known as Terra Preta de Índio, were formed by pre‐Columbian populations. ADE soils are characterized by increased fertility and have continued to be exploited following European colonization. Here, we evaluated the legacy of land‐use and soil enrichment on the composition and structure in ADE and non‐ADE (NDE) forests.LocationEastern and southern Amazonia.Time periodPre‐Columbia – 2014.MethodsWe sampled nine pairs of ADE and adjacent NDE forest plots in eastern and southern Amazonia. In each plot, we collected soil samples at 0–10 and 10–20 cm depth and measured stem diameter, height, and identified all individual woody plants (palms, trees and lianas) with diameter ≥ 10 cm. We compared soil physicochemical properties, vegetation diversity, floristic composition, aboveground biomass, and percentage of useful species.ResultsIn the nine paired plots, soil fertility was significantly higher in ADE soil. We sampled 4,191 individual woody plants representing 404 species and 65 families. The floristic composition of ADE and NDE forests differed significantly at both local and regional levels. In southern Amazonia, ADE forests had, on average, higher aboveground biomass than other forests of the region, while in eastern Amazonia, biomass was similar to that of NDE forests. Species richness of both forest types did not differ and was within the range of existing regional studies. The differences in composition between large and small diameter tree recruits may indicate long‐term recovery and residual effects from historical land‐use. Additionally, the proportion of edible species tended to be higher in the ADE forests of eastern and southern Amazonia.Main conclusionsThe marked differences in soil fertility, floristic composition and aboveground biomass between ADE and NDE forests are consistent with a small‐scale long‐term land‐use legacy and a regional increase in tree diversity.

Enhancing Methods for Under-Canopy Unmanned Aircraft System Based Photogrammetry in Complex Forests for Tree Diameter Measurement

The application of Unmanned Aircraft Systems (UAS) beneath the forest canopy provides a potentially valuable alternative to ground-based measurement techniques in areas of dense canopy cover and undergrowth. This research presents results from a study of a consumer-grade UAS flown under the forest canopy in challenging forest and terrain conditions. This UAS was deployed to assess under-canopy UAS photogrammetry as an alternative to field measurements for obtaining stem diameters as well as ultra-high-resolution (~400,000 points/m2) 3D models of forest study sites. There were 378 tape-based diameter measurements collected from 99 stems in a native, unmanaged eucalyptus pulchella forest with mixed understory conditions and steep terrain. These measurements were used as a baseline to evaluate the accuracy of diameter measurements from under-canopy UAS-based photogrammetric point clouds. The diameter measurement accuracy was evaluated without the influence of a digital terrain model using an innovative tape-based method. A practical and detailed methodology is presented for the creation of these point clouds. Lastly, a metric called the Circumferential Completeness Index (CCI) was defined to address the absence of a clearly defined measure of point coverage when measuring stem diameters from forest point clouds. The measurement of the mean CCI is suggested for use in future studies to enable a consistent comparison of the coverage of forest point clouds using different sensors, point densities, trajectories, and methodologies. It was found that root-mean-squared-errors of diameter measurements were 0.011 m in Site 1 and 0.021 m in the more challenging Site 2. The point clouds in this study had a mean validated CCI of 0.78 for Site 1 and 0.7 for Site 2, with a mean unvalidated CCI of 0.86 for Site 1 and 0.89 for Site 2. The results in this study demonstrate that under-canopy UAS photogrammetry shows promise in becoming a practical alternative to traditional field measurements, however, these results are currently reliant upon the operator’s knowledge of photogrammetry and his/her ability to fly manually in object-rich environments. Future work should pursue solutions to autonomous operation, more complete point clouds, and a method for providing scale to point clouds when global navigation satellite systems are unavailable.

Stem taper functions for Betula platyphylla in the Daxing\u2019an Mountains, northeast China

Accurate prediction of stem diameter is an important prerequisite of forest management. In this study, an appropriate stem taper function was developed for upper stem diameter estimation of white birch (Betula platyphylla Sukaczev) in ten sub-regions of the Daxing’an Mountains, northeast China. Three commonly used taper functions were assessed using a diameter and height dataset comprising 1344 trees. A first-order continuous-time error structure accounted for the inherent autocorrelation. The segmented model of Max and Burkhart (For Sci 22:283–289, 1976. https://doi.org/10.1093/forestscience/22.3.283) and the variable exponent taper function of Kozak (For Chron 80:507–515, 2004. https://doi.org/10.5558/tfc80507-4) described the data accurately. Owing to its lower multicollinearity, the Max and Burkhart (1976) model is recommended for diameter estimation at specific heights along the stem for the ten sub-regions. After comparison, the Max and Burkhart (1976) model was refitted using nonlinear mixed-effects techniques. Mixed-effects models would be used only when additional upper stem diameter measurements are available for calibration. Differences in region-specific taper functions were indicated by the method of the non-linear extra sum of squares. Therefore, the particular taper function should be adjusted accordingly for each sub-region in the Daxing’an Mountains.

Structural and compositional shifts in Cerrado fragments in up to 11 years monitoring

The Cerrado has a wide diversity of fauna and flora, and the knowledge of its horizontal structure, in different time intervals allows the prediction of its structural and floristic characteristics. The aim of this study was to evaluate the changes in structure and composition of tree community in three fragments of Cerrado with low anthropization, in an interval of 11 years at Minas Gerais state. Rectangular plots of fixed size were sampled, measuring stem diameter and height of all living arboreal individuals with diameter at 1.30 meters above ground (DBH) ≥ 5 cm. The tree vegetation dynamics study of the areas was performed, as well as the floristic analysis and the diametric structure. Considering all fragments and years of measurement, the recruitment of trees surpassed its mortality. The basal area varied between 3.67 and 13.07 m².ha-1. The studied areas, considering all fragments and years of measurement, showed a Shannon diversity index (H') from 3.43 to 3.87 nat.ind-1 and Pielou equitability index (J') ranged an interval between 0.77 and 0.82. The similarity calculated by the Jaccard index (J), when performed per plot considering the three fragments, showed a value of 0.2653. Also, related to the development and growth of the study areas, it can be inferred that all fragments and their respective years of measurement had a J-inverse pattern. In conclusion, it can be inferred that the three fragments maintained a representative growth in number of individuals and basal area.

Modelling bark thickness variation in stems of cork oak in south-western Portugal

The thickness of bark (cork) is of utmost importance for its industrial processing and, therefore, for the sustainable management of cork oak (Quercus suber L.) woodlands. Cork thickness has been reported to decrease from the stem base upwards but, to our knowledge, prediction models have not yet been presented. This study intended to develop reliable models to predict stem profiles of cork thickness. We addressed the relationship between bark thickness and stem height by measuring stem diameters and cork thickness at various stem heights in 76 trees. Through a repeated measure ANOVA, we selected the bark thickness response variables, cork-ring width and cork thickness. A mixed-effect modelling approach was used to fit linear bark thickness curves with stem height. Our results showed that the equations that performed better for cork thickness were functions of the stem relative height and cross-sectional cork area increment. The decreasing trend upwards the stem might lead to underestimation of cork thickness at the base, more than overestimate it at upper stem parts, in relation to the values at breast height, which are generally used to estimate the thickness of the whole cork plank. Furthermore, cork thickness curves were tree size-related, with larger trees exhibiting a steeper reduction in cork thickness upwards the stem.

Allometric Relationships for Predicting Aboveground Biomass and Sapwood Area of Oneseed Juniper (Juniperus monosperma) Trees.

Across the semiarid ecosystems of the southwestern USA, there has been widespread encroachment of woody shrubs and trees including Juniperus species into former grasslands. Quantifying vegetation biomass in such ecosystems is important because semiarid ecosystems are thought to play an important role in the global land carbon (C) sink, and changes in plant biomass also have implications for primary consumers and potential bioenergy feedstock. Oneseed juniper (Juniperus monosperma) is common in desert grasslands and pinyon–juniper rangelands across the intermountain region of southwestern North America; however, there is limited information about the aboveground biomass (AGB) and sapwood area (SWA) for this species, causing uncertainties in estimates of C stock and transpiration fluxes. In this study, we report on canopy area (CA), stem diameter, maximum height, and biomass measurements from J. monosperma trees sampled from central New Mexico. Dry biomass ranged between 0.4 kg and 625 kg, and cross-sectional SWA was measured on n = 200 stems using image analysis. We found a strong linear relationship between CA and AGB (r2 = 0.96), with a similar slope to that observed in other juniper species, suggesting that this readily measured attribute is well suited for upscaling studies. There was a 9% bias between different approaches to measuring CA, indicating care should be taken to account for these differences to avoid systematic biases. We found equivalent stem diameter (ESD) was a strong predictor of biomass, but that existing allometric models underpredicted biomass in larger trees. We found SWA could be predicted from individual stem diameter with a power relationship, and that tree-level SWA should be estimated by summing the SWA predictions from individual stems rather than ESD. Our improved allometric models for J. monosperma support more accurate and robust measurements of C storage and transpiration fluxes in Juniperus-dominated ecosystems.

How should we measure the DBH of multi-stemmed urban trees?

Foresters use diameter at breast height (DBH) to estimate timber volumes, quantify ecosystem services, and predict other biometrics that would be difficult to directly measure. But DBH has numerous problems, including a range of “breast heights” and challenges with applying this standard to divergent tree forms. Our study focuses on street trees that fork between 30 and 137 cm of height (hereafter “multi-stemmed trees”), which researchers have identified as particularly challenging in the ongoing development of urban allometric models, as well as consistency in measurements across space and time. Using a mixed methods approach, we surveyed 25 urban forestry practitioners in twelve cities in the northeastern United States (US) about the measurement and management of multi-stemmed street trees, and intensively measured 569 trees of three frequently planted and commonly multi-stemmed genera (Malus, Prunus, and Zelkova) in Philadelphia, PA, US. Specifically, we measured stem diameter at several distances above the ground: at the root collar, at 30 cm, just below the fork (which occurred between 30 and 137 cm), and at 137 cm (up to six stems following established protocols). Survey responses indicated that current mensuration practices are burdensome, that practitioners employ alternatives to the current protocols for measuring at 137 cm, and that small-statured, frequently multi-stemmed trees are an increasing proportion of street tree populations. Analysis of field data did not find substantial differences between methods of measurement with regard to predictive power for total height and average crown width. Alternatives to the current protocols for measuring at 137 cm have other advantages, including time required, ease of measurement, simplicity, and capacity to compare measurements between trees and over time. For trees that fork between 30 and 137 cm, we recommend taking a single diameter measurement at a lower height—either just below the fork or at 30 cm. Diameter measurements at 30 cm better serve researchers seeking to consistently measure radial growth over time, whereas diameter below the fork may suit practitioners who do not need fine resolution in trunk measurements.

Potential of mangrove stands carbon deposits in the north part Pannikang islands, Barru Regency, South Sulawesi province

Global warming is one of the world’s issues today. Global warming is a result of the greenhouse effect because it absorbs infrared light reflected by the earth from the sun. CO2 gas contributes the most to the greenhouse effect. The solution to the problem of global warming is the presence of forests. One type of forest ecosystem is the mangrove forest ecosystem. This study aims to determine the carbon storage of mangrove stands found on Pannikiang Island in the northern part of Barru Regency, South Sulawesi Province. Biomass measurement uses the allometric method performed on mangrove stems by measuring stem diameter in a circle-shaped sample plot of 12.62 m. The results showed that there were ten species found in the study locations: Avicennia alba, Avicennia marina, Bruguiera gymnorrhiza, Bruguiera sexangula, Ceriops decandra, Rhizophora apiculata, Rhizophora mucronata, Rhizophora stilosa, Scyphiphora hydrophyllaceae, and Soneratia alba. The total value of the total stem carbon deposits in the mangrove stands on Pannikiang Island in the northern part of Barru Regency reached a total carbon stem portion of 640,512 tons with a maximum range of 859,174 tons and a minimum of 421,871 tons.

Mobile Terrestrial Photogrammetry for Street Tree Mapping and Measurements

Urban forests are often heavily populated by street trees along right-of-ways (ROW), and monitoring efforts can enhance municipal tree management. Terrestrial photogrammetric techniques have been used to measure tree biometry, but have typically used images from various angles around individual trees or forest plots to capture the entire stem while also utilizing local coordinate systems (i.e., non-georeferenced data). We proposed the mobile collection of georeferenced imagery along 100 m sections of urban roadway to create photogrammetric point cloud datasets suitable for measuring stem diameters and attaining positional x and y coordinates of street trees. In a comparison between stationary and mobile photogrammetry, diameter measurements of urban street trees (N = 88) showed a slightly lower error (RMSE = 8.02%) relative to non-mobile stem measurements (RMSE = 10.37%). Tree Y-coordinates throughout urban sites for mobile photogrammetric data showed a lower standard deviation of 1.70 m relative to 2.38 m for a handheld GPS, which was similar for X-coordinates where photogrammetry and handheld GPS coordinates showed standard deviations of 1.59 m and the handheld GPS 2.36 m, respectively—suggesting higher precision for the mobile photogrammetric models. The mobile photogrammetric system used in this study to create georeferenced models for measuring stem diameters and mapping tree positions can also be potentially expanded for more wide-scale applications related to tree inventory and monitoring of roadside infrastructure.

Evaluation of potential modeling approaches for Scots pine stem diameter prediction in north-eastern Turkey

Critical forest management decisions are strongly supported by the knowledge of forest ecosystems and their features. There is a growing trend towards using models to predict the most accurate yield projections for forest management. In this research area, features of standing trees, such as diameters along the tree bole, are of much interest. This paper is focused on the construction and evaluation of potential modeling approaches for Scots pine stem diameter prediction in north-eastern Turkey, including (1) fixed-effects, (2) mixed-effects, (3) three and five quantile regression, and (4) an artificial neural network modeling techniques. Nonlinear fixed-effects, mixed-effects, and both quantile regression models were based on a variable exponent taper equation, while the Levenberg-Marquardt algorithm was investigated for the artificial neural network (LMANN) models construction. Parameters of the tested models were calibrated by the use of several stem diameter measurements obtained at relative height positions, with models’ superior performances in diameter predictions when the information of the additional diameter measured at 60% of total height, was included. Evaluation statistics show that both quantile regression and mixed-effects models improved results as compared to fixed-effects model. Overall, LMANN models achieved the best performance with higher accuracy for the Scots pine stem diameter prediction for the whole tree as well as for sections within the tree based on the ten relative height classes. Similarly to previous findings, the results of this study support that the use of mixed-effects modeling increases flexibility and efficiency of taper equations for stem diameter prediction. Moreover, the LMANN modeling approach was evaluated as superior according to its adequacy in predicting diameters along the tree stem. Therefore, the usage of the LMANNs for the tree stem diameter prediction can be a very useful tool in forest management practice and thus worth consideration.

The Relationship between Stem Diameter Shrinkage and Tree Bole Moisture Loss Due to Transpiration

The responsiveness of four types of stem diameter shrinkage indicators to sap flow changes was compared under four air temperature and cloudiness conditions: above 0 °C below 80% cloud cover days; above 0 °C large percentage cloud cover days; low temperature below 80% cloud cover days; and low temperature large percentage cloud cover days. In this study, we investigated the effects of indicative functions of relatively easy-to-access stem diameter shrinkage on variation characteristics of sap flow. High-resolution-based stem diameter shrinkage is related to changes in tree moisture content. Stem diameter shrinkage indicators are adopted to confirm sap flow changes resulting from transpiration pull, which may enhance the power of stem diameter shrinkage as an index for tree bole moisture loss. After measuring stem diameter variations, the following stem diameter shrinkage indicators were calculated: maximum daily shrinkage, daily stem diameter increment, daily stem diameter variation, and tree water deficit-induced stem shrinkage (TWD). Sap flow was measured synchronously, and stem diameter shrinkage indicators were analyzed to confirm their responses to sap flow. TWD was positively correlated (r ≥ 0.317) with daily variations in sap flow and reached extremely significant levels (p ≤ 0.001) under all conditions. TWD and maximum daily shrinkage were able to better reflect the correlation between changes in stem diameter and sap flow on a daily scale, except large percentage cloud cover days with low temperatures. Changes in stem diameter had no correlation with sap flow during low temperature and large percentage cloud cover days. Among all stem diameter shrinkage indicators, TWD showed the highest correlation (r ≥ 0.601 and p ≤ 0.001) with sap flow under all conditions, except during large percentage cloud cover days with low temperatures. The stem diameter shrinkage indicators did not reflect sap flow changes during large percentage cloud cover days with low temperatures. The indicator that best reflected moisture loss of trees was TWD.

FITOGEOGRAFI PASAK BUMI (Eurycoma longifolia, Jack) PADA KAWASAN HUTAN LINDUNG GUNUNG AMBAWANG BUKIT BENDERA KABUPATEN KUBU RAYA KALIMANTAN BARAT

Pasak Bumi (Eurycoma longifolia, Jack.) It is a rare medicinal plant commonly found in Indonesian forests. The purpose of the study was to determine the phytogeography of pasak Bumi in Mount Ambawang Bukit Bendera, Kubu Raya Regency. The study was conducted by survey method with data collection techniques using the census method. The conditions observed included conditions, slope, altitude, and wind direction aspects (North, South, West, East). Then map the census results by measuring stem diameter (cm), tree height (m), slope (%), altitude (m asl), wind direction aspects, and coordinate points. Then true value, with the literature on habitat and phytogeography of pasak Bumi. Based on the results of the study found a total of 91 individuals scattered starting from an altitude of 98-200 m above sea level, the southernmost most found amounted to 45 individuals, the eastern part numbered 17 individuals, the western part amounted to 18 individuals while in the north with the number 11 individuals. This is because growth is covered by a canopy of dense trees that cover the pasak Bumi plant.Keywords: Eurycoma longifolia, Gunung Ambawang, Kubu Ray, pasak Bumi, phytogeography.

Time shift between net and gross CO2 uptake and growth derived from tree rings in pine and spruce

Key messageA 6–9 month backward time shift of the carbon uptake gave the highest correlation between annual biomass increment and carbon uptake in this old even aged forest.Plants’ carbon uptake and allocation to different biomass compartments is an important process for both wood production and climate mitigation. Measurements of the net ecosystem carbon dioxide exchange between ecosystems and the atmosphere provide insights into the processes of photosynthesis, respiration and accumulation of carbon over time, and the increase in woody biomass can be assessed by allometric functions based on stem diameter measurements. The fraction of carbon allocated to radial stem growth varies over time, and a lag between carbon uptake and growth can be expected. The dynamics of non-structural carbohydrates and autotrophic and heterotrophic respiration are key mechanisms for understanding this lag effect. In this study, a 9-year record of carbon flux and tree-ring data from Norunda, Sweden was used to investigate the relationship between net and gross carbon uptake and carbon allocated to growth. The flux data were aggregated to monthly sums. When full 12-month periods of accumulated carbon exchange were successively shifted backwards in time, the highest correlation was found with a 6–9 month shift, showing that a large part of the previous growing season was important for explaining the biomass increment of the following year.

Measuring stem diameters with TLS in boreal forests by complementary fitting procedure

Point clouds generated by terrestrial laser scanners (TLS) have enabled new ways to measure stem diameters. A common method for diameter calculation is to fit cylindrical or circular shapes into the TLS point cloud, which can be based either on a single scan or a co-registered combination of several scans. However, as various defects in the point cloud may affect the final diameter results, we propose an automatized processing chain which takes advantage of complementing steps. Processing consists of two fitting phases and an additional taper curve calculation to define the final diameter measurements. First, stems are detected from co-registered data of several scans using surface normals and cylinder fitting. This provides a robust framework for localizing the stems and estimating diameters at various heights. Then, guided by the cylinders and their indicative diameters, another fitting round is performed by cutting the stems into thin horizontal slices and reassessing their diameters by circular shape. For each slice, the quality of the cylinder-modelled diameter is evaluated first with co-registered data and if it is found to be deficient, potentially due to modelling defects or co-registration errors, diameter is detected through single scans. Finally, slice diameters are applied to construct a spline-based taper curve model for each tree, which is used to calculate the final stem dimensions. This methodology was tested in southern Finland using a set of 505 trees. At the breast height level (1.3 m), the results indicate 5.2 mm mean difference (3.2%), −0.4 mm bias (-0.3%) and 7.3 mm root mean squared error (4.4%) to reference measurements, and at the height of 6.0 m, respective values are 6.5 mm (3.6%), +1.6 mm (0.9%) and 8.4 mm (4.8%). These values are smaller compared to most of the corresponding contemporary studies, and outperform the initial cylinder models. This indicates that the applied processing chain is capable of producing relatively accurate diameter measurements, which can, at the cost of computational heaviness, remove various defects and improve the modelling results.

Application of Arbuscular Mycorrhiza from Senaru Forest Rhizosphere for Gyrinops versteegii Germination and Growth

The aims of this research are to apply Senaru forest rhizosphere on Kabupaten Lombok Barat West Nusa Tenggara as Mycorrhiza inoculants for Gyrinops versteegii germination and growth. Rhizosphere sample was taken from ten sampling spot on Senaru forest between Latitude: 08o18.808’ S – 08o19.174’ S and Longitude: 116o24.138’ E – 116o24.181’E. This study employed Factorial Experiment Design with 2 Factor including: Medium Composition (M) and Mychorizza Inoculant (I). There were 5 media composition: M1 (sand), M2 (soil:sand = 1:2), M3 (soil:sand = 1:1), M4 (soil:sand = 2:1), M5 (soil). There were 2 types of Inoculation: I1 (without inoculant) and I2 (innoculant from senaru Rhizosphere). Growth parameters observed in this study were: germination percentage, stem length, stem diameter and root colonization. Germination percentage of G. versteegii seeds in all growth media are below 60 % which could be classified as low germination rate. Also germination from media without rhizosphere is higher than germination from media with rhizosphere. On the other hand, G. versteegii growth on rhizosphere media is slightly higher than growth of G. versteegii on media without rhizosphere based on stem diameter and length measurement. It tends that medium composition with higher sand proportion tended to gives better germination and growth rate of G. verteegii. Myorrhiza colonization on G. versteegii root was higher in media with rhizosphere addition. It could be concluded that Application of Senaru rhizosphere containing Mycorrhiza increases G. versteegii growth but not its germination percentage. This research enrich knowledge in biological science about asociation of mycorrhiza with G. versteegii especially on its growth and germination