Stationary Phase Gradients Research Articles

Continuous stationary phase gradient preparation on planar chromatographic media using vapor phase deposition of silane

A new, versatile, and straightforward vapor phase deposition (VPD) approach was used to prepare continuous stationary phase gradients (cSPGs) on silica thin-layer chromatography (TLC) plates using phenyldimethylchlorosilane (PDCS) as a precursor. A mixture of paraffin oil and PDCS was placed at the bottom of an open-ended rectangular chamber, allowing the reactive silanes to evaporate and freely diffuse under a controlled atmosphere. As the volatile silane diffused across the length of the TLC plate, it reacted with the surface silanol groups thus functionalizing the surface in a gradient fashion. Characterization of the gradient TLC plates was done through UV visualization and diffuse reflectance spectroscopy (DRS). Visualizing the fluorescent gradient plates under UV radiation shows the clear presence of a gradient with the side closest to the vapor source undergoing the most modification. More quantitative characterization of the shape of the gradient was provided by DRS. The DRS showed that the degree of modification and shape of the gradient was dependent on the concentration of silane, VPD time, and relative humidity. To evaluate the chromatographic performance, a mixture of three aromatic compounds (acetaminophen (A), aspirin (As), and 3-hydroxy-2-naphthoic acid (3H)) was spotted on the high (GHP) and low phenyl (GLP) ends of the gradient TLC plates and the results compared to the separations carried out on unmodified and uniformly modified plates. The GHP TLC plates showed retention factors (Rf) of 0.060 ± 0.006, 0.391 ± 0.006, and 0.544 ± 0.006, whereas the unmodified plate displayed Rf values of 0.059 ± 0.006, 0.092 ± 0.003, and 0.037 ± 0.002 for the analytes A, As, and 3H, respectively. From the Rf values, it was observed that each modified plate exhibited different selectivity for the analytes. The GHP TLC plates exhibited better separation performance, and improved resolution compared to the GLP, unmodified, and uniformly modified plates. Overall, VPD is a new, cost-effective method for creating a gradient on the stationary phase which has the potential to advance chromatographic separation capabilities.

Preparation and characterization of stationary phase gradients on C8 liquid chromatography columns

Continuous C8 stationary phase gradients are created on commercial Waters Symmetry Shield RP8 columns by strategically cleaving the C8 moieties in a time-dependent fashion. The method relies on the controlled infusion of a trifluoroacetic acid/water/acetonitrile solution through the column to cleave the organic functionality (e.g., C8) from the siloxane framework. The bond cleavage solution is reactive enough to cleave the functional groups, even with polar groups embedded within the stationary phase to protect the silica. Both the longitudinal and radial heterogeneity were evaluated by extruding the silica powder into polyethylene tubing and evaluating the percent carbon content in the different sections using thermogravimetric analysis (TGA). TGA analysis shows the presence of a stationary phase gradient in the longitudinal direction but not in the radial direction. Two different gradient profiles were formed with good reproducibility by modifying the infusion method: one exhibited an ‘S’-shaped gradient while the other exhibited a steep exponential-like gradient. The gradients were characterized chromatographically using test mixtures, and the results showed varied retention characteristics and an enhanced ability to resolve nicotine analytes.

Acoustic metascreen for broadband wavefront manipulation with stationary phase gradients

The development of an efficient acoustic metascreen utilizing artificial micro-structured metamaterials holds paramount importance for the manipulation of acoustic wavefronts. However, the expansive broadband capability of such metascreens is often compromised due to the variations in amplitude and phase profiles of the conceived structures at different frequencies. To address this issue, we introduce a broadband metascreen composed of several interconnected acoustic cavities. The concept is substantiated by the theoretical explication of the abrupt cross-section tube model. The resultant metascreen demonstrates high transmission efficiency and maintains a consistent phase profile over a wide frequency band, which implies that the relative phase disparities amongst neighboring pixels are retained at uniform intervals across the entire frequency spectrum, enabling the distinct broadband functionality of the metascreens developed. Through both simulations and experimental measurements, we exhibit the ability of the metascreen to manipulate the wavefront of transmitted waves, accomplishing acoustic focusing and self-bending across multiple frequencies. Our research paves the way for a novel and multifunctional method to manipulate broadband wavefronts through transmissive grooved acoustic metamaterial, offering a practical and promising methodology to develop advanced acoustic apparatuses.

On-column modification for the creation of temperature-responsive stationary phases

Temperature-responsive liquid chromatography (TRLC) offers an alternative for retention and selectivity optimisation in HPLC. This approach thereby exploits temperature gradients on stimuli-responsive stationary phases and forfeits the necessity for solvent gradients, allowing analyses to be performed using aqueous mobile phases. Consequently, it can be employed as a green alternative to reversed-phase separations. However, current production to obtain temperature-responsive columns inherently require dedicated column packing processes with polymer-modified particles. To facilitate the development of temperature-responsive phases, a flow-through modification procedure was developed allowing on-column modification of aminopropyl silica columns. Three columns were manufactured using this novel flow-through approach, which achieved identical column efficiencies compared to existing TRLC column. Demonstrating the possibility of bypassing the dedicated packing processes without losing efficiency. Additionally, it was observed that flow-through produced columns yielded higher retention at elevated temperatures despite their reduced carbon load. Further investigation of the carbon load revealed the presence of stationary phase gradients, whose influence was studied via novel developed retention experiments, which revealed a negligible change reduction in retention upon a change of polymer modification from 19.8% to 14.5%. However, further decrease from 14.5% to 12.3% resulted in a larger change. Interestingly, a further enhancement in apparent plate numbers was observed when operating the column under a reversed flow, yielding an increasing stationary phase gradient. This on-column modification procedure demonstrates the potential for modification of existing (commercial) packed columns to achieve temperature-responsive phases without loss of efficiency or retention. Thus, not only facilitating accessibility to temperature-responsive phases, but also aiding with development of further generations of temperature-responsive phases by removing the need for packing optimisation. Additionally, a novel experiment was set up to easily investigate the effect of inhomogeneous stationary phases retention.

Characterization and identification of chemical components in traditional Chinese medicine Psoraleae Fructus based on UHPLC-Q-TOF-MS

This study was designed to comprehensively characterize and identify the chemical components in traditional Chinese medicine Psoraleae Fructus by establishing an ultra-high performance liquid chromatography/quadrupole time-of-flight mass spectrometry(UHPLC-Q-TOF-MS) method in combination with in-house library. The chromatographic separation conditions(stationary phase, column temperature, mobile phase, and elution gradient) and key MS monitoring parameters(capillary voltage, nozzle voltage, and fragmentor) were sequentially optimized via single-factor experiments. A BEH C_(18) column(2.1 mm×100 mm, 1.7 μm) was finally adopted, with the mobile phase consisting of 0.1% formic acid in water(A) and acetonitrile(B) at the flow rate of 0.4 mL·min~(-1) and column temperature of 30 ℃. Auto MS/MS was utilized for data acquisition in both positive and negative ion modes. By comparison with reference compounds, analysis of the MS~2 fragments, in-house library retrieval and literature research, 83 compounds were identified or tentatively characterized from Psoraleae Fructus, including 58 flavonoids, 11 coumarins, 4 terpenoid phenols, and 10 others. Sixteen of them were identified by comparison with reference compounds, and ten compounds may have not been reported from Psoraleae Fructus. This study achieved a rapid qualitative analysis on the chemical components in Psoraleae Fructus, which provided useful reference for elucidating its material basis and promoting the quality control.

Studying the possibilities of dual stationary phase gradients to explore alternative selectivities in liquid chromatography

Previous studies on stationary phase gradients have inspired a new phase of theoretical work and an expansion of the concept to include multiple retention mechanisms. The theoretical work presented here corroborates previous reports that a stationary phase gradient can produce selectivity in a separation as effectively as careful adjustments to a mobile phase gradient program, especially when such column is operated in mobile phase gradient elution mode. In reality, no column is singularly based on one type of interaction mechanism, and many columns are nowadays designed to solicit multiple solute to stationary phase interactions. These mixed-mode columns inspired us to give more careful consideration to the idea of dual stationary phase gradients. With the theory applied here, it is suggested that the modulation of two unique interaction mechanisms across a chromatographic column has the potential to open up previously unseen selectivities. With the increasing prevalence of mixed-mode columns, we believe there will be ample opportunity to explore these new concepts in experimental work.

Preparation of ion exchange columns with longitudinal stationary phase gradients

Preparation of columns using electrostatic attachment of anion exchange latex particles with charge density gradients is demonstrated. When such columns are oriented with the highest charge density at the column outlet, the chromatographic performance at low linear velocity is enhanced. When multiple successive charge density gradients are prepared along the length of the column with the highest capacity oriented at the inlet end of the column, significant improvement in chromatographic performance is observed during gradient elution chromatography.

Isolation of a High Antioxidant Non-Toxic Polar Fraction from Garcinia mangostana Fruit Pericarp by Reverse Phase Column Chromatography

The crude polar extract of mangosteen fruit pericarp not only has a moderate antioxidant activity of (55±4 μg/mL) but also has high cytotoxicity (16±0.5 μg/mL). The high cytotoxicity presumably is caused by the presence of complex cytotoxic compounds from the mangosteen pericarp. To obtain a non-toxic extract preparation with high antioxidant activity, polar crude 50% ethanol extracts of mangosteen pericarp were partially purified using reverse-phase column chromatography with Silica C18 as the stationary phase and acetonitrile-water gradient elution. Six of the ten fractions collected had high antioxidant activities, with IC50 2,2-diphenyl-1-picrylhydrazyl (DPPH) radical scavenging antioxidant levels <50 μg/mL. Three fractions (fractions 3, 5, and 7) with the highest antioxidant activities of (16.4 ± 0.6 µg/mL), (17.8 ± 2 µg/mL) and (17.4 ± 1.8 µg/mL) respectively, were chosen for further cytotoxicity, phenolic content and High-Performance Liquid Chromatography (HPLC) analysis. The cytotoxic tests were conducted with the Brine Shrimp Lethality Assay. Fraction 3 had low cytotoxicity (LC50 485 ± 96 µg/mL) and fraction 5 was non-toxic (LC50 ≥ 1000 µg/mL), while fraction 7 still had high cytotoxicity (LC50 2.8 ± 0.8 µg/mL). The chromatogram profiles of HPLC showed that fractions 3 and 5 contained more polar compounds than the compounds present in fraction 7. It can be concluded that the reverse phase method succeeded in the isolation of a non-toxic polar fraction, that is, fraction 5, with a significantly higher (p<0.05) antioxidant activity than in the original crude polar extracts. This fraction had a high total phenolic content of 43.3 ± 0.3 g GAE per 100 g extract.

A selective comprehensive reversed-phase×reversed-phase 2D-liquid chromatography approach with multiple complementary detectors as advanced generic method for the quality control of synthetic and therapeutic peptides.

There is a huge, still increasing market for synthetic and therapeutic peptides. Their quality control is commonly based on a generic reversed-phase liquid chromatography (RPLC) method with C18 stationary phase and acetonitrile gradient with 0.1% trifluoroacetic acid in the mobile phase. It performs exceptionally well for a wide variety of impurities, yet structurally closely related impurities with similar sequences, not resolved in preparative RPLC, may easily coelute in the corresponding QC run as well. To address this problem an advanced generic 2D-LC impurity profiling method was developed in this work. It employs a selective comprehensive (high resolution sampling) RP×RP 2D-LC separation using a 100×2.1mm ID column with the common acidic generic gradient in the first dimension, while RPLC under basic pH on a short 30×3mm ID column is used in the second dimension. Recording data with a UV detector at 215nm after 1D separation provides the common generic 1D chromatogram. However, after the 2D separation a flow splitter enabled recording of the signals of complementary detectors comprising a diode array detector (DAD) in-line with a charged aerosol detector (CAD) and a quadrupole-time-of-flight (QTOF) mass spectrometer (MS) with an electrospray ionization (ESI) source. Generic conditions of this 2D-LC method have been established through optimization of 2D stationary and mobile phase considering different pH values and buffer concentrations. The orthogonal separation principle has been documented by a number of therapeutic peptides including Exenatide, Octreotide, Cyclosporine A and Oxytocin as well as some other proprietary synthetic peptides. The information density can be further enhanced by using the QTOF-MS detector by data independent acquisition with SWATH. Through this sequential window acquisition of all theoretical fragment ion mass spectra it became possible to collect MS/MS data comprehensively in the high-resolution sampling window, thus enabling the extraction of 2D-EICs from fragment ions and the generation of 2D-contour plots of all product ions. Using Oxytocin as an example for an important therapeutic peptide, the ability of this advanced generic sRP-UV×RP-DAD-CAD-ESI-QTOF-MS/MS method with SWATH for peptide quality control is discussed.

Fabrication and Characterization of a Reversed-Phase/Strong Cation Exchange Stationary Phase Gradient

Continuous stationary phase gradients for liquid chromatography (LC) have been recently shown to be a promising method of altering selectivity. In this work, we present the first multicomponent continuous stationary phase gradient for separations involving both reversed-phase (RP) and strong cation exchange (SCX) mechanisms. These columns are fabricated using a two-step methodology based on controlled rate infusion (CRI). First, destructive CRI creates a gradient of excess silanol groups along a uniform C18 column. Next, these columns are infused with 3-mercaptopropyltrimethoxysilane (MPTMOS), which bonds to the excess silanol groups. The terminal thiols of the MPTMOS ligands are oxidized with H2O2 to create the sulfonate functionality (SO3−) needed for SCX separations. The success of the modification procedure is characterized by thermogravimetric analysis and X-ray photoelectron spectroscopy. The stability of the C18-SO3− gradients were found to have less than 5 % retention loss and the column-to-column reproducibility had a relative standard deviation under 9 %. The peak asymmetry factors for seven biogenic amines were found to be between 1.03 ± 0.04 to 1.30 ± 0.02, which illustrates minimal peak tailing due to poor packing and residual silanol groups. Characterization of the gradient columns using an isocratic mobile phase showed a unique elution order compared to a uniform C18 and SO3− columns. At lower counterion concentrations, more than 48 % of the overall retention on the gradient stationary phase is due to a SCX mechanism. Meanwhile, the RP mechanism was shown to predominate at higher counterion concentrations on the gradient columns (SCX retention contribution less than 40 %). Coupling the stationary phase gradient to a salt gradient in the mobile phase showed that the gradient phase provides a unique, intermediate selectivity to the uniform C18 and SO3− columns. Under an ACN mobile phase gradient, a significant increase (p < 0.003) in the retention times of three biogenic amines (15 – 16 %) was observed when the multicomponent gradient was oriented to have a high SO3− ligand density near the detector. This work serves as a proof-of-concept design for a multicomponent stationary phase gradient to continue fundamental studies into retention and encourage novel applications.

Experimental- and simulation-based investigations of coupling a mobile phase gradient with a continuous stationary phase gradient

This work seeks to explore and understand the effects of column orientation and degree of modification of continuous stationary phase gradient columns under a mobile phase gradient using both simulations and experiments. Peak parameters such as retention times, peak widths and resolution are obtained for five phenolic compounds on a C18-silica gradient stationary phase. Simulations show that peak widths for the solutes are dependent upon the fractional composition of C18 and orientation of the stationary phase gradient when coupled to a mobile phase gradient. Also, when compared to a simulated uniform mixed-mode column, peak widths reach a minimum on the gradient column with a coverage higher than 50% C18 where the column is oriented to have the C18 dense region at the end. Experimentally, continuous stationary phase gradients were fabricated to have a total C18 composition of 78% of the original uniform column with an exponential profile using a previously described destructive controlled rate infusion method. Under gradient mobile phase conditions, experimental retention times for the gradient column showed a significant increase compared to the original 100% C18 column. Simulations with a similar C18 composition, however, predicted decreased retention times from the original C18 column. A statistical increase in the retention time of protocatechuic acid and decrease in the peak width of tyrosol, caffeic acid, and coumaric acid were noted when the gradient column was oriented to have the C18 dense region located near the detector. Collectively, combining gradients in both the mobile and stationary phases can yield interesting neighboring ligand effects and peak broadening/focusing effects.

Destructive stationary phase gradients for reversed-phase/hydrophilic interaction liquid chromatography

The use of stationary phase gradients for liquid chromatography (LC) is a promising new strategy to allow for specific control over the selectivity of a separation by having a gradual change in the ligand density along the length of the column. Unfortunately, there have been very few, if any, methods to prepare continuous stationary phase gradients on traditional packed LC columns. In this work, destructive methodologies are used to create stationary phase gradients on commercial C18 columns by infusing trifluoroacetic acid (TFA) onto the column through controlled rate of infusion (CRI). The introduction of TFA via CRI while the column is heated at 80 °C promotes acid hydrolysis of the alkylsilane ligand in a gradient fashion. Characterization with scanning electron microscopy and Barrett-Joyner-Halenda pore size distributions of the stationary phase after fabrication of the destructive gradient establishes that the chromatographic support was not damaged during the procedure. The shape of the gradient was examined using thermogravimetric analysis (TGA) and attenuated total reflectance-Fourier transform infrared (ATR-FTIR) spectroscopy. TGA and ATR-FTIR showed an increase in the percent carbon loss along the length of the column, indicating that there was an increase in the C18 ligand from the front to the end of the column. Two selectivity tests demonstrated a decrease in the hydrophobicity and increase in the silanol activity of the stationary phase gradient from the uniform C18 counterpart. Additionally, the fabrication of the destructive stationary phase gradient resulted in two different surface functionalities allowing hydrophobic and hydrophilic interactions with analyte species depending on the mobile phase composition. Plots of the log of retention factor versus percent acetonitrile illustrated that these stationary phase gradients have two separation mechanisms: reversed-phase (RP) and hydrophilic interaction. Coupling the stationary phase gradient with a mobile phase gradient shows differences in the peak widths and the resolution of phenolic compounds, indicating that the orientation of the stationary phase gradient has the potential to enhance the resolution of a separation. With this methodology, stationary phase gradients can be fabricated on previously used RP columns, allowing for these columns to be repurposed.

Simulation of elution profiles in liquid chromatography – III. Stationary phase gradients

A previously developed liquid chromatographic simulator (see parts I and II) [1–3] is extended to allow for simulations of stationary phase gradients with isocratic and gradient mobile phases. Gradient stationary phases have recently been proposed as means of engineering unique chromatographic selectivities. In the present work, the simulator provides retention times and peak widths that agree with closed form theory for a linear gradient in retention factor and provides accurate retention time predictions for experimentally implemented continuous and discontinuous gradients. Calculation of discontinuous gradients implemented using the commercially available POPLC system have shown good agreement with experiment, with the largest deviation of the simulated retention time from experiment of 4.5%. In addition, simulations of a novel continuous amine gradient column show good agreement with experiment, and give insights into synergistic interactions on column. With the exception of solutes that show evidence of synergistic interactions, the simulated retention times are in agreement with the 95% confidence limits of the experimental values.

Development of Quality Control Method for Glucofarmaka Antidiabetic Jamu by HPLC Fingerprint Analysis

Herbal medicines become increasingly popular all over the world for preventive and therapeutic purposes. Quality control of herbal medicines is important to make sure their safety and efficacy. Chromatographic fingerprinting has been accepted by the World Health Organization as one reliable strategy for quality control method in herbal medicines. In this study, high-performance liquid chromatography fingerprint analysis was developed as a quality control method for glucofarmaka antidiabetic jamu. The optimum fingerprint chromatogram were obtained using C18 as the stationary phase and linear gradient elution using 10–95% acetonitrile:water as the mobile phase within 60 minutes of elution and detection at 210 nm. About 20 peaks were detected and could be used as fingerprint of glucofarmaka jamu. To evaluate the analytical performance of the method, we determined the precision, reproducibility, and stability. The result of the analytical performance showed reliable results. The proposed method could be used as a quality control method for glucofarmaka antidiabetic jamu and also for its raw materials.

Amine Gradient Stationary Phases on In-House Built Monolithic Columns for Liquid Chromatography.

Stationary phase gradients on monolithic silica columns have been successfully and reproducibly prepared and characterized with comparisons made to uniformly modified stationary phases. Stationary phase gradients hold great potential for use in liquid chromatography (LC), both in terms of simplifying analysis as well as providing novel selectivity. In this work, we demonstrate the creation of a continuous stationary phase gradient on in-house synthesized monolithic columns by infusing an aminoalkoxysilane solution through the silica monoliths via controlled rate infusion. The presence of amine and its distribution along the length of gradient and uniformly modified columns were assessed via X-ray photoelectron spectroscopy (XPS). XPS showed a clear gradient in surface coverage along the length of the column for the gradient stationary phases while a near uniform distribution on the uniformly modified stationary phases. To demonstrate the application of these gradient stationary phases, the separations of both nucleobases and weak acids/weak bases on these gradient stationary phases have been compared to uniformly modified and unmodified silica columns. Of particular note, the retention characteristics of 11 gradient columns, 5 uniformly modified columns, and 5 unmodified columns have been tested to establish the reproducibility of the synthetic procedures. Standard deviations of the retention factors were in the range from 0.06 to 0.5, depending on the analyte species. We show that selectivity is achieved with the stationary phase gradients that are significantly different from either uniformly modified amine or unmodified columns. These results indicate the significant promise of this strategy for creating novel stationary phases for LC.

Separation of transition and heavy metals using stationary phase gradients and thin layer chromatography

Stationary phase gradients for chelation thin layer chromatography (TLC) have been investigated as a tool to separate a mixture of metal ions. The gradient stationary phases were prepared using controlled rate infusion (CRI) from precursors containing mono-, bi-, and tri-dentate ligands, specifically 3-aminopropyltriethoxysilane, N-[3-(trimethoxysilyl)propyl] ethylenediamine, and N-[3-(trimethoxysilyl)propyl] diethylenetriamine. The presence and the extent of gradient formation were confirmed using N1s X-ray photoelectron spectroscopy (XPS). XPS results showed that the degree of modification was dependent on the aminosilane precursor, its concentration, and the rate of infusion. The separation of four transition and heavy metals (Co2+, Pb2+, Cu2+, and Fe3+) on gradient and uniformly modified plates was compared using a mobile phase containing a stronger chelating agent, ethylenediaminetetraacetic acid (EDTA). The retention of the metal ions was manipulated by varying the surface concentration of the chelating ligands. The order of retention on unmodified plates and on plates modified with a monodentate ligand was Fe3+>Cu2+∼Pb2+∼Co2+, while the order of retention on plates modified with bi- and tri-dentate ligands was Fe3+>Cu2+>Pb2+∼Co2+. Fe3+ and Cu2+ were much more sensitive to the concentration of chelating ligand on the surface (displaying lower Rf values with increasing ligand concentration) than Pb2+ and Co2+. Complete separation was achieved using a high concentration of the tridentate ligand coupled with a longer time for modification, yielding a retention order of Fe3+>Cu2+>Co2+>Pb2+.

Band broadening along gradient reversed phase columns: A potential gain in resolution factor

The advantages of using columns packed with stationary phases having a composition gradient so that retention factors increase toward the outlet and eluting them with an isocratic mobile phase may provide increased peak resolution in liquid chromatography. This approach is discussed from a theoretical viewpoint. The retention factor is assumed to increase linearly along the column. The peak width can be predicted under three different conditions: (1) the possible band compression is neglected (the Giddings model); (2) band compression is taken into account (the Poppe model); and (3) both band compression and extra-column effects are considered in the calculations. The impact of a stationary phase gradient on the resolution of a pair of compound difficult to separate (constant selectivity α=1.05) is illustrated for a 3mm×100mm silica monolithic column of the second generation (porosity ϵt=0.85, plate height H=6μm) operated with a new generation of liquid chromatograph (pre- and post-column volume variances of 10 and 5μL2, respectively). The results show that the resolution factor RS becomes optimum for a specific positive value of the retention gradient along the column. This optimum depends on the retention factor at the column inlet.

Multidimensional high‐temperature liquid chromatography: A new technique to characterize the chemical heterogeneity of Ziegler‐Natta‐based bimodal HDPE

AbstractHigh temperature two‐dimensional liquid chromatography (HT 2D‐LC) was recently introduced as a new technique to analyze the heterogeneities with regard to composition and molar mass present in model blends of polyolefins and various olefin copolymers. The method uses graphite as stationary phase and solvent gradients of 1‐decanol → 1,2,4‐trichlorobenzene as mobile phase for the compositional separation. With the aim to maximize the chromatographic resolution, the influence of the separation's temperature in the first dimension was evaluated: approaching the θ‐temperature of polyethylene (PE) in 1‐decanol selectively enhances the retention of higher molar mass PE standards while that of the lower molar mass ones is hardly affected. A bimodal ethylene/1‐butene copolymer and its temperature rising elution fraction (TREF) fractions were separated by HT 2D‐LC. For the first time, both axes of the contour plot were calibrated with regard to chemical composition and molar mass, respectively. Prefractionation of the bulk sample by TREF enhances the detectability of separated components of the 2D separation. The influence of the separation temperature, that is, working around the θ‐temperature of PE in 1‐decanol, can be used to enhance the chromatographic resolution of the 2D chromatography. © 2012 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013

Production of novel polymer monolithic columns, with stationary phase gradients, using cyclic olefin co-polymer (COC) optical filters

Polymer monolithic columns with controlled surface ligand density, providing stationary phase gradients within monolithic capillary columns, have been developed using photo-grafting through optical filters. Utilising commercially available cyclic olefin co-polymer (COC) films, the production of an optical filter capable of attenuating UV irradiation, in a tailored manner, was investigated. This novel optical filter was successfully applied to the surface modification of poly(BuMA-co-EDMA) monolithic columns in a multi-step grafting procedure. Fabricated columns were subjected to scanning capacitively coupled contactless conductivity (sC(4)D), to determine the distribution of the grafted functional groups, axially along the column. Further modification to produce a chelating stationary phase gradient of iminodiacetic acid (IDA) was demonstrated. To demonstrate the distribution of the IDA sites, a metal cation (Cu(2+)) was complexed to the IDA forming a chelate. Upon the formation of a complex of IDA with Cu(2+), an overall drop in conductive response was observed. The COC optical filter was also used in the fabrication of a grafted gradient of strong cation exchanger (SCX), sulphopropyl methacrylate (SPM) upon a polymer monolith, demonstrating the broader applicability of such a filter.

Thin-layer chromatography with stationary phase gradient as a method for separation of water-soluble vitamins

The group of hydrophilic vitamins play an important role in human health, and their lack or excess produces specific diseases. Therefore, the analysis of these compounds is indispensable for monitoring their content in pharmaceuticals and food in order to prevent some human diseases. TLC was successfully applied in the analysis of hydrophilic vitamins, but the most difficult problem in the simultaneous analysis of all these compounds is to find an optimum stationary phase-mobile phase system due to different chemical characteristics of analytes. Unfortunately structural analogues are difficult to separate in one chromatographic run, and this is the case in hydrophilic vitamins investigations. TLC gives the possibility to perform two-dimensional separations by using stationary phase gradient achieving the highest resolution by combining two systems with different selectivity. The goal of this work was to develop a method of analysis enabling separation of hydrophilic vitamins using TLC with adsorbent gradient. The developed method was used for identifying the water-soluble vitamins in alcoholic extracts of Hippophae rhamnoides and of Ribes nigrum.