Static Magnetic Field Research Articles

Synchrotron tomography of magnetoprimed soybean plant root system architecture grown in arsenic-polluted soil.

The present study evaluated the repercussions of magnetopriming on the root system architecture of soybean plants subjected to arsenic toxicity using synchrotron radiation source based micro-computed tomography (SR-µCT). This will be used evey where as abbreviation for the technique for three-dimensional imaging. Seeds of soybean were exposed to the static magnetic field (SMF) of strength (200 mT) for 1h prior to sowing. Magnetoprimed and non-primed seeds were grown for 1 month in a soil-sand mixture containing four different levels of sodium arsenate (0, 5, 10, and 50 mg As kg-1 soil). The results showed that arsenic adversely affects the root growth in non-primed plants by reducing their root length, root biomass, root hair, size and number of root nodules, where the damaging effect of As was observed maximum at higher concentrations (10 and 50 mg As kg-1 soil). However, a significant improvement in root morphology was detected in magnetoprimed plants where SMF pretreatment enhanced the root length, root biomass, pore diameter of cortical cells, root hair formation, lateral roots branching, and size of root nodules and girth of primary roots. Qualitative analysis of x-ray micro-CT images showed that arsenic toxicity damaged the epidermal and cortical layers of the root as well as reduced the pore diameter of the cortical cells. However, the diameter of cortical cells pores in magnetoprimed plants was observed higher as compared to plants emerged from non-primed seeds at all level of As toxicity. Thus, the study suggested that magnetopriming has the potential to attenuate the toxic effect of As and could be employed as a pre-sowing treatment to reduce the phytotoxic effects of metal ions in plants by improving root architecture and root tolerance index. This study is the very first exploration of the potential benefits of magnetopriming in mitigating the toxicity of metals (As) in plant roots utilizing the micro-CT technique.

Magnetic Resonance Imaging-Compatible Electromagnetic Actuator: Design and Tests

This paper presents the detailed design, construction and tests of a protype iron-free MRI-compatible electromagnetic actuator. The originality of this proposal lies in the use of the homogeneous static magnetic field B0, present in the MRI bore, to ensure the electromechanical energy conversion. The armature is composed of three rectangular coils in a three-phase arrangement, which makes the actuator very light-weight and compact. The operating principle is that of an AC synchronous motor with a rotating armature. In order to design the actuator, a 3D analytical electromagnetic model is developed to predict the magnetic field produced by the armature winding. Then, a 3D finite element (FE) computation is performed to validate the analytically calculated magnetic field. The developed analytical model is then inserted into an optimization routine based on Genetic Algorithms (GAs) to obtain the prototype dimensions to be realized. Finally, the prototype is constructed and tested inside an MRI research scanner. The results indicate that the reduction in the Signal-to-Noise Ratio (SNR) and the geometrical distortion are less than 5% when the actuator is powered with a current of 10 times the rated one and when it is located very close to the subject to be imaged.

Ultra-high static magnetic fields altered the embryonic division and development in Caenorhabditis elegans via multipolar spindles

IntroductionUltra-high static magnetic fields (SMFs) have unique advantages in improving medical and academic research. However, the research on the early embryo exposure of ultra-high SMFs is minimal, extensive exploration is indispensable in living organisms. ObjectivesThe present study was aimed to study the effects of ultra-high SMFs on the early embryonic division and development of Caenorhabditis elegans (C. elegans). MethodsEarly adult parents containing fertilized eggs in vivo were exposed to SMFs at intensities ranging from 4 T to 27 T. The number of mitotic cells in the reproductive glands of the P0 worms, early embryonic cell spindle localization, embryo hatching and the reproductive as well as developmental indicators of F1 and F2 nematodes were examined as endpoints. ResultsOur results indicated that ultra-high SMFs has no obvious effect on the germ cell cycle, while 14 T and 27 T SMFs significantly increased the proportion of multi-polar spindle formation in early embryonic cells, and reduced the developmental rate and lifespan of C. elegans exposed at the embryonic stage. Spindle abnormalities of early embryonic cells, as well as the down-regulation of genes related to asymmetric embryonic division and the abnormal expression of the non-muscle myosin NMY-2 in the division grooves played a critical role in the slowing down of embryonic development induced by ultra-high SMFs. ConclusionsThis study provided novel information and a new sight for evaluating the biosafety assessment by exposure to ultra-high SMFs at the early embryonic stage in vivo.

Structural features of steel pulsed laser treatment within a permanent magnetic field

Structural features of steel pulsed laser treatment within a permanent magnetic field

Enhanced current-carrying capability in YBCO coated conductor bilayers for high-field applications

We have investigated the impact of bilayer structures on the critical current density, J c, of YBa2Cu3O6+x (YBCO) coated conductor films, i.e. films grown on buffered metal substrates, under varying temperature and magnetic field conditions. The bilayers consisted of a YBCO layer free of artificial pinning centers and 8 wt% BaZrO3-added (BZO) layer on top, where the thickness percentage of the layers was varied from 0 to 100 %. The results reveal that the bilayer configuration enhances J c at temperatures below 60 K, with a significant improvement in high magnetic fields (5–8 T) and temperatures ≤20 K. The optimal BZO-added layer thickness was found to be approximately 70 %, reaching 80 % at 8 T. Structural examinations indicate improved growth of YBCO and BZO nanorods in the bilayer structure with BZO-added layer thickness ≤80 %. Theoretical model of the bilayer structure considering the layers as two parallel superconductors with different properties was developed. It was found that the model adequately explains all the experimentally observed tendencies, and thus the observed maximum in J c is due to better growth of the BZO-added layer. The study provides valuable insights for designing optimal bilayer structures for diverse applications operating in different temperature and magnetic field regimes.

Electronically controlled left-handed metamaterial based on memristor/ferrite multilayer at microwaves

The paper focuses on exploring the left-handed microwave properties of a double negative metamaterial formed by utilizing elements from two natural materials: (a) thin-layer ferrite, which exhibits effective negative permeability, and (b) thin-layer TiO2 (memristor), which exhibits effective negative permittivity. Both of these natural materials possess negative constitutive parameters within the frequency band where they exhibit left-handed properties. We have defined the conditions under which a backward wave appears in the double negative frequency band. We analyze a left-handed metamaterial (LHM) for the microwave frequency band formed by a multilayer structure from the above-mentioned materials. We have theoretically demonstrated the transparency of this LHM. Furthermore, we demonstrate the ability to control the electromagnetic properties of the metamaterial. This can be achieved not only by applying both static magnetic and static electric fields but also by solely using a static electric field. The latter is one of the main advantages of this structure for technological implementation. We discuss potential applications of the designed structure as a component of microwave electronics. The capability to control various resistance states of nanoscaled TiOX with low voltage offers further control over the properties of the left-handed metamaterial.

Armature Reaction Analysis and Suppression of Voice Coil Actuator Based on an Improved Magnetic Equivalent Circuit Model

The high thrust density voice coil actuator (VCA) is a key component for the deployers to determine the CubeSats' separation velocity in orbit directly. To improve the VCA's thrust density and power consumption, it is essential to analyze the armature reaction under heavy current work conditions. This paper proposes a dynamic splitting method of the magnetic equivalent circuit (MEC) model for analyzing the armature reaction of the VCA. This MEC model can effectively reveal the interaction mechanism between the dynamic winding field and the permanent magnet (PM) field, which provides an approach to readily and quickly analyze the armature reaction. Based on the understanding of the mechanism, we found an effective way to suppress the armature reaction and propose a new VCA with double PM flux circuits. The electromagnetic performances of the new configuration are evaluated by comparing it with the conventional one. Both the theoretical and experimental results show that the new structure achieves lower magnetic saturation, lower armature reaction, and higher thrust density. A research prototype was constructed and experimentally tested to verify the theoretical results of the armature reaction, magnetic field, thrust, separation velocity, and other performances. The new VCA realizes a wide and accurate modulation of separation velocity for the CubeSats.

Numerical analysis of three-dimensional magnetopause-like reconnection properties by Hall MHD simulation for SPERF-AREX

The ground-based device, the Space Plasma Environment Research Facility (SPERF), is established for experimentally simulating magnetosphere plasma processes, with one of its major components, asymmetric reconnection experiment (AREX), for three-dimensional physics relevant to dayside asymmetric magnetopause reconnection. As an outstanding property of fast magnetic reconnection in collisionless plasmas, the Hall effect and its geometric features can be experimentally investigated in SPERF-AREX with various magnetic configurations related to different driven scenarios for simulating interplanetary magnetic field (IMF) conditions. In this work, the Hall effect and its geometric characteristics in such proposed experiments are numerically studied based on a Hall MHD model. The simulation results reveal that in the X-line geometry relevant to southward IMFs, the Hall field features in cross section perpendicular to the X-line are mostly analogous to typical two-dimensional Hall quadrupole structures, clearly an “anti-parallel reconnection” feature. In the separator (A-B null-line) geometry relevant to arbitrary IMF orientations, along the separator between magnetic nulls, the magnetic field configuration near a magnetic null also demonstrates the typical quadrupolar pattern. However, the pattern is distorted away (>10di, here di=c/ωpi is the ion inertial length) from the nulls, in a way similar to that in “component reconnection.” Furthermore, the Hall effect induces a dawn-dusk asymmetry for both the X-line and the separator geometries.

Errata of "Alternative method to calculate the magnetic field of permanent magnets with azimuthal symmetry"

The magnetic field component By produced by a rectangular prism was corrected by using Mathematica.

Generation of the vortex terahertz radiation by the interaction of two-color Laguerre–Gaussian laser with plasmas in the presence of a static magnetic field

The generation of vortex terahertz (THz) radiation by the interaction of a two-color Laguerre–Gaussian (LG) laser with plasmas under an external magnetic field is investigated theoretically and numerically. It is found that the vortex THz radiation with good monoenergetic properties can be generated successfully, and the orbital angular momentum of the LG lasers can be transferred to the radiation. In this scheme, the external magnetic field can not only enhance the intensity but can also break the spatial distribution symmetry of the vortex THz radiation. With the increase in the initial plasma density, the intensity of the vortex THz radiation increases significantly before reaching saturation and the spatial period of the radiation decreases, which indicates the monoenergetic peak of the vortex THz radiation can be well controlled through the initial plasma density. The relevant conclusions are verified by two-dimensional particle-in-cell simulations.

Design of a Permanent Magnet Electromagnetic Acoustic Transducer (EMAT) for In-Situ Inspection of Metals at high Temperatures

In this proposed research, a permanent magnet longitudinal wave Electromagnetic Acoustic Transducer (EMAT) was designed for In-Situ inspection of metals at high temperatures. A permanent magnet EMAT generates Lorentz force inside metals by the interaction of magnetic fields and eddy currents. As temperature rises, various factors can influence the intensity of the Lorentz force, making it difficult to produce and detect ultrasonic waves. Thus, it is essential to optimize the sensor at ambient temperature before attempting to generate a reliable signal at elevated temperatures. The challenge highlighted has been addressed by optimizing the intensity of static field by varying the parameter like spacing between magnets that are being used. In order to minimize the effects of elevated temperatures, the sensor's stability has been enhanced by the implementation of efficient insulating measures. Furthermore, Finite Element (FE) simulations were conducted under on aluminium sample. These simulation results were then compared to experimental data to validate the efficiency of the designed sensor. Keywords: Permanent magnet, EMAT, Lorentz force, ultrasonic waves, high temperature, static magnetic field intensity.

Magnetoelectric effect of PZT/Ni50.5Mn27.9Ga21.6/PZT laminate composite: design and measurement

In this work we designed an experimental setup based on a double coil and an electromagnet to measure the magnetoelectric effect of a PZT/Ni50.5Mn27.9Ga21.6/PZT laminate composite, made of a bulk single crystal of Ni50.5Mn27.9Ga21.6 shape memory alloy. The shape memory alloy showed a martensitic transformation at 298 K, a Curie temperature at 368 K and room temperature magnetization of 2.87 uB/f.u. Strain response was found to be between 3% and 4% for magnetic fields greater than or equal to 4 kOe. As for the magnetoelectric effect, the induced voltages were moderate, increasing linearly with the frequency. There was a slight change in the magnetoelectric response with the DC applied magnetic field. For low frequencies, the magnetoelectric voltage was on the order of 10 mV and for higher frequencies about 50 mV. The best magnetoelectric coefficient (215 mV/cmOe) was obtained under an AC field of 1 Oe and a static magnetic field of 7 kOe.

Versatile design of tunable Faraday rotator for terahertz band using graphene-InSb-graphene and 1D photonic crystal

A Faraday rotator, composed of graphene-InSb-graphene as magnetic floor and Si- SiO2 materials as the non-magnetic floor is designed to operate at 10 THz frequency, promising for realizing future communication devices. The height of the dielectric layers significantly influences the selection of the resonance frequency. Additionally, the structure can be tuned to operate at a desired frequency thanks to the adjustable surface conductivity of graphene. The findings reveal that variations in the strength of the applied magnetic field intricately modulate the Faraday rotation (FR) and subsequently alter the transmission spectrum. Specifically, values exceeding 40 degrees of FR and a transmission rate of 50% were attainedwhen the magnetic field strength (B) was set at 2 Tesla. Finally, we have proposed a design process for a Faraday rotator that can operate at any arbitrary frequency in the THz band. This innovative design has the potential to introduce a novel approach in ultrathin magneto-optical nanophotonic devices, enabling the realization of polarization rotators characterized by elevated transmittance and reduced reliance on applied static magnetic fields within the THz band.

Numerical simulation and mathematical modeling of biomechanical stress distribution in poroelastic tumor tissue via magnetic field and bio-ferro-fluid

Based on scientific evidence, it seems that bio-magnetic systems can change the process of cancer cell death by affecting the distribution of pressure and mechanical stress in the tumor tissue. Already most of the research has been done experimentally and few mathematical modeling and numerical simulations have been done to investigate the relationship between the magnetic parameters and the mechanical stress of the tumor tissue. This is despite the fact that in order to be able to make new equipment with the help of medical engineering methods, it is definitely necessary that the mathematics governing the problem and changes in the effective magnetic parameters (such as the shape of the magnetic source, magnetic flux density, magnetic source distance and ferro-fluid volume fraction) should be studied as much as possible. In this research, using numerical simulation and mathematical modeling, four common geometrical shapes (rectangular and circular) of the static magnetic field source were used to investigate the relationship between the change of the effective magnetic parameters and the mechanical stress created in the tumor tissue. The results of this research showed that when the magnetic flux density and ferro-fluid volume fraction and also the distance between the magnet and the tissue are kept constant, as well as without spending any extra energy, for a rectangular magnet, just by changing the way the source is placed on the tissue, the average biomechanical stress inside the tumor tissue causes a 25 % change. Also, for a circular magnet, just by doubling the radius of the magnet, the average biomechanical stress inside the tumor tissue causes a 73 % change.

Key factors governing the direction of SH0 mode guided waves generated by FeCo strip-based magnetostrictive sensor

Magnetostrictive sensors (MsS) are widely used to generate ultrasonic guided waves of SH0 mode for the purpose of detecting defects in plate-like structures. An MsS commonly employs a rectangular magnetostrictive strip and a sensor unit (including detection coil and magnet) to generate SH0 waves. However, the effect of coverage range of static magnetic field (Ls) and dynamic magnetic field (LD) on the SH0 wave generation direction has not been fully explored. So far, the cases of LS<<LD and LD>>LS are seldom discussed in the development of MsS for generating SH0 mode. In this study, the key factor governing the direction of SH0 mode generated by FeCo strip-based MsS was experimentally clarified. The transition phenomenon in the generation direction of SH0 wave was observed while the combination parameters crossing the control line of Ls≈LD. The phenomenon could be interpreted by the alterations in the operation mechanism of Wiedemann effect and reversed Wiedemann effect. As a result, the generation direction of SH0 mode could be tuned along the static magnetic field (Ls<<LD), the dynamic magnetic field (Ls>>LD) or the direction of both static and dynamic magnetic fields (Ls≈LD). The findings in this study is of benefit for guiding the design of MsS array with the tunable generation direction of SH0 mode.

On the future sustainable ultra-high-speed maglev: A superconductor magnet technology enabling high energy efficiency and robustness

The blooming ultrahigh-speed SC maglev (superconducting magnetically levitated train) prompts green travel worldwide. We utilized high-temperature superconductor (HTS) magnets and have developed an energy-economical SC maglev prototype (Energ. Convers. Manage. (291)117247). In this paper, as a continuation, we further improve and maximize the performance of its key part – the HTS magnets, especially in compact high magnetic field and energy density operating conditions, by innovating an HTS magnet technology named the Shunted Extreme-NI Concept. The operational energy-robustness, -density, and -economy of HTS magnets, compared to the conventional type, are improved by 96.8%, 66.7%, and 52.5%, respectively. For a full-scale maglev equipped with this technology, the estimated energy consumption per passenger kilometer can be further reduced to below 20% of that of airplanes under the same cruising speed of 1000 km/h. This work is dedicated to advancing the energy performances of HTS magnets, heading to the future sustainable maglev transportation.

Parameters and Effects of Magnetic Field and Potassium Carbonate in Water. Applications

The polar water molecule has an angle between the two-hydroxyl O–H bonds of 104.5∘. The unequal sharing of electrons gives a slight negative charge near the oxygen atom and a slight positive charge near the hydrogen atoms of the water molecule. Water is a polar solvent. Hydrogen electromagnetic bonds are formed between water molecules. They involve hydrogen atoms from one water molecule and oxygen from another one. A permanent magnetic field influences the formation of hydrogen bonds between water molecules. Current research by Wu and Brant, 2020 illustrates that the water conductivity at the magnetic induction B = 13500 or 1.35 T increases from 100 to 250 μS · cm−1. The amount of protons in water (H+) decreases with the water alkalization and increasing pH. The work by Yap and co-authors’ indicates that stronger effects on pH, oxidation-reduction potential (ORP), and dissolved oxygen (DO) are observed in the non-reversed polarity of the magnets. Our study uses a constant magnet with the magnetic induction B = 3000 G or 0.3 T; eight permanent magnets are applied to 1000 L of water. Potassium carbonate (K2CO3) is also added, by increasing the alkalinity of water. The application is in livestock as drinking water for sheep and goats.

Design of guided wave magnetostrictive patch transducer with vertical static bias magnetic field for pipe inspection

Compared with electromagnetic acoustic transducer (EMAT), magnetostrictive patch transducer (MPT) has higher energy conversion efficiency. MPT is often used to excite and receive long-distance ultrasonic guided waves for defect detection or structural health monitoring of large industrial equipment. In this work, a new design method of permanent magnet MPT using the vertical static bias magnetic field to excite shear horizontal (SH) guided waves is proposed. First, the mathematical model of exciting ultrasonic guided waves by a vertical static bias magnetic field MPT is established, and the equivalent surface stress in the magnetostrictive patch is calculated. It is shown that the vertical static bias magnetic field MPT can excite SH guided waves in plates. Then, the influence of static bias magnetic field intensity on the amplitude of guided wave signal is analyzed. Compared with other traditional MPTs, the amplitude of SH guided wave signal excited by the vertical static bias magnetic field MPT is increased. Finally, a periodic permanent magnet (PPM)-MPT with a central frequency of 120 kHz is designed. The proposed PPM-MPT improves the energy conversion efficiency compared to the circumferential alternating permanent magnet array type MPT. The PPM-MPT can detect defects in a steel pipe with a wall thickness of 3.5 mm and an inner diameter of 100 mm. The results show that the PPM-MPT designed in this paper successfully detects the through hole with a diameter of 2 mm, and the cross-section loss rate of the defect is about 0.6 %.

Tunable quasi-bound states in the continuum in magneto-optical metasurfaces

The enhancement of electromagnetic field with high Q factor in metasurfaces has attracted extensive attention of researchers. Magneto-optical metasurfaces (MOMS) provide approaches with controllable magnetic fields to modulate the optical response, which contributes towards the magneto-optical Kerr effect in nanophotonic devices. However, it is challenging for MOMS to obtain narrow spectra peak with high Q factors. Here, we propose MOMS-supported quasi-bound states in the continuum (quasi-BIC) and theoretically investigate the evolution process from BIC to quasi-BIC. By applying an external magnetic field, the BIC in our proposed metasurface can be transformed into a quasi-BIC with finite Q factor up to 33 620. Meanwhile, the quasi-BIC shows magnetization-related circular dichroism with a vortex point in the polarization graph, based on time-reversal symmetry breaking in the magneto-optical material under the condition of external magnetic field. The quasi-BIC also maintains nearly unity reflection and almost zero absorption, showing a promising future in sensing. Our results enrich the light control mechanisms of MOMS and provide a unique opportunity for applications requiring flexible tunability and high Q factors, such as sensors, laser sources, filters and chiral-related elements.

Evaluating the Interaction Between Silicon Surface and Microorganisms in Various Solvents Under the Influence of a Static Magnetic Field Using Fractal Analysis

Evaluating the Interaction Between Silicon Surface and Microorganisms in Various Solvents Under the Influence of a Static Magnetic Field Using Fractal Analysis