Star Poly Ethylene Research Articles

Microphase Separation and Gelation through Polymerization-Induced Self-Assembly Using Star Polyethylene Glycols.

Polymerization-induced self-assembly (PISA) during the synthesis of diblock copolymers has garnered considerable interest; however, architectures beyond diblock copolymers have scarcely been explored. Here, we studied PISA using 4- and 8-arm star polyethylene glycol (PEG), as well as 2-arm (linear) PEG, wherein each terminus of PEG was functionalized with a chain-transfer agent, holding a constant molar mass for each arm. Styrene was polymerized from each PEG terminus through reversible addition-fragmentation chain-transfer (RAFT) polymerization in an ionic liquid (1-butyl-3-methylimidazolium hexafluorophosphate, [BMIM][PF6]), with a total solute concentration of 40 wt %. While the styrene monomer is soluble in [BMIM][PF6], polystyrene is not; thus, self-assembly and cross-linking (gelation) occur. Structural analysis by small-angle X-ray scattering revealed that a relatively ordered microphase-separated structure for PISA was observed. Two-arm PEG-PS formed hexagonally packed cylinders, whereas 4- and 8-arm PEG-PS exhibited hexagonal close-packed spheres and disordered spheres. The dynamics, studied by oscillatory rheology, were also influenced by the number of arms; the 4-arm star block copolymers showed the highest plateau modulus. This study demonstrates that the topology is an important factor in controlling the microphase-separated structure and mechanical properties when preparing gels through PISA.

Prostate-Specific Membrane Antigen Targeted StarPEG Nanocarrier for Imaging and Therapy of Prostate Cancer.

The tumor uptake of large non-targeted nanocarriers primarily occurs through passive extravasation, known as the enhanced permeability and retention (EPR) effect. Prior studies demonstrated improved tumor uptake and retention of 4-arm 40 kDa star polyethylene glycol (StarPEG) polymers for cancer imaging by adding prostate-specific membrane antigen (PSMA) targeting small molecule ligands. To test PSMA-targeted delivery and therapeutic efficacy, StarPEG nanodrugs with/without three copies of PSMA-targeting ligands, ACUPA, are designed and synthesized. For single-photon emission computed tomography (SPECT) imaging and therapy, each nanocarrier is labeled with 177Lu using DOTA radiometal chelator. The radiolabeled nanodrugs, [177Lu]PEG-(DOTA)1 and [177Lu]PEG-(DOTA)1(ACUPA)3, are evaluated in vitro and in vivo using PSMA+ PC3-Pip and/or PSMA- PC3-Flu cell lines, subcutaneous xenografts and disseminated metastatic models. The nanocarriers are efficiently radiolabeled with 177Lu with molar activities 10.8-15.8 MBq/nmol. Besides excellent in vitro PSMA binding affinity (kD = 51.7nM), the targeted nanocarrier, [177Lu]PEG-(DOTA)1(ACUPA)3, demonstrated excellent in vivo SPECT imaging contrast with 21.3% ID/g PC3-Pip tumors uptake at 192h. Single doses of 18.5MBq [177Lu]PEG-(DOTA)1(ACUPA)3 showed complete resolution of the PC3-Pip xenografts observed up to 138days. Along with PSMA-targeted excellent imaging contrast, these results demonstrated high treatment efficacy of [177Lu]PEG-(DOTA)1(ACUPA)3 for prostate cancer, with potential for clinical translation.

Molecular dynamics simulation of stretch-induced crystallization of star polymers as compared to their linear counterparts

Abstract The linear and star polyethylene during static crystallization and stretch-induced crystallization has been investigated by molecular dynamics simulations. The findings demonstrate that the branching point of the star polymer system does not participate in crystallization, and the crystallization ability of the segments near the branching point and at the end of the chains is inferior. Due to the existence of branching points, the mobility and conformational extension of chain segments are weak, and the entanglement degree is higher than that of linear systems. For stretch-induced crystallization, stretching promotes the extension of molecular chains and arranges them along the stretching direction. The crystal nucleation and growth in linear and star polymer systems are significantly faster than in static crystallization. The mobility of the chain segments close to the branching point is partially enhanced by stretching, while the branching point still substantially affects the chain conformation and segment orientation. It is worth mentioning that we have verified some crucial results that cannot be observed in the experiments at the microscopic scale.

Star polyethylenes by coordinative polymerization

AbstractWith their distinct star architecture, star polymers show some desirable materials properties and have received extensive research interest. To date, the advancements in living anionic and controlled radical polymerization techniques have empowered the versatile synthesis of a variety of star polymers from several groups of monomers that are amenable to these polymerization techniques. Despite the fact that polyethylene is the largest produced commodity polymer worldwide, the synthesis of star polyethylenes as a unique polyethylene grade has somehow lagged due to the limited availability of powerful transition metal catalysts that can effectively facilitate ‘living’ ethylene polymerization for the construction of star architectures. Nevertheless, some progress had been made over the past two decades. In this review, we attempt to summarize the developments in the area, with an emphasis on synthesis strategies.

Quantitative Luminescence Photography of a Swellable Hydrogel Dressing with a Traffic-Light Response to Oxygen.

Sensor-integrated wound dressings are emerging tools applicable to a wide variety of medical applications from emergency triage to at-home monitoring. Uncomfortable, unnecessary wound dressing changes may be avoided by providing quantitative insight into tissue characteristics related to wound healing such as tissue oxygenation, pH, and exudate/transudate volume. Here, a simple cost-effective methodology for quantifying oxygen and pH in a swellable hydrogel dressing using a single photograph is presented. The red and green luminescence of a novel dendritic polyamine Pt-porphyrin and fluorescein conjugate quantitatively responds to oxygen and pH, respectively, and enables robust sensing. The porphyrin conjugate, when combined with a four-arm star polyethylene glycol (PEG) amine polymer, rapidly crosslinks at room temperature with an N-hydroxysuccinimide (NHS)-PEG crosslinker to form a color-changing hydrogel dressing with tunable swelling capabilities applicable to a variety of wound environments. An inexpensive digital single-lens reflex (DSLR) camera modified with bandpass filters captures the hydrogel luminescence using simple macroscopic photography, and conversion to HSB colorspace allows for intensity-independent image analysis of the hydrogels' dual modality response. The hydrogel formulation exhibits a robust and validated visible red-orange-green "traffic light" spectrum in response to oxygen changes, regardless of swelling state, pH, or autofluorescence from skin, thereby enabling the clinician friendly naked-eyefeedback.

Estimation of linear, ring, and star polyethylene viscosity through proper orthogonal decomposition and Voronoi tessellation analysis of molecular dynamics data

AbstractWe carried out molecular dynamics (MD) simulations on polyethylene (PE) with linear, ring, and four‐arm symmetrical star structures at various molecular weights (420 − 5700 g ⋅ mol−1) and temperatures (410−450 K). We then analyzed the MD data using the technique of proper orthogonal decomposition (POD) to obtain the time correlation functions of different eigenmodes, thereby calculating the viscosity of the aforementioned macromolecules. The time correlation functions show that the ring and star PEs relax much faster than their linear counterpart. Free volume size distributions and the mean fractional free volume of the equilibrated PE melts were determined by Voronoi tessellation (VT). The mean fractional free volume and the corresponding effective pressure were then used to calculate viscosity using a polymer free volume theory recently developed in our lab. The POD and VT approaches yielded similar viscosity values. Furthermore, they both successfully predicted the crossover in the molecular weight dependence of viscosity. It is interesting to note that the difference in the free volume parameters (ϕ+ − F) of various structures always fall within the range of 0.02−0.06. Here, F and ϕ+ signify the probability of a bead having enough free volume for the activation of diffusive motion or momentum transfer and the minimum required fraction of such beads, respectively. The temperature dependence of viscosity as obtained from the POD and VT approaches gave comparable apparent activation energy () values of 5.8−6.4 and 5.4−6.4 kcal ⋅ mol−1, respectively, for the three structures.

Injectable Drug Delivery System Based on In Situ Self‐Assembly of Liquid Star Polyethylene Glycol–Poly(lactic‐co‐glycolic acid)

Particulate systems are widely used in biomedical applications, yet current systems are limited by their stability, complicated production processes, and the use of toxic excipients and cosolvents. Here, a new concept for an injectable nanocarrier system based on the in situ self‐assembled star polyethylene glycol (PEG)– poly(lactic‐co‐glycolic acid) (PLGA)/drug mixture is presented. The new injectable material is based on a neat (solvent‐free) liquid copolymer that self‐assembles after it is injected along with the drug to form a particulate delivery system. The nanocarriers’ formation rate and encapsulation capabilities of hydrophobic drugs can be fine‐tuned by changing the molecular weight of the PLGA segment. Furthermore, the starPEG–PLGA‐based system demonstrates potential as a drug carrier for hydrophobic drugs and shows biocompatibility with cell line culture.

Analysis of Brownian Dynamics and Molecular Dynamics Data of Unentangled Polymer Melts Using Proper Orthogonal Decomposition

AbstractA non‐linear Brownian dynamics (BD) model based upon the Rouse model is developed for unentangled polymer melts. The essence of the model is that it includes an equilibrium spring length b, a non‐linear force term that is not present in the equation of motion of the Rouse model. The equation of motion is solved numerically with the technique of proper orthogonal decomposition (POD) to obtain the dynamics information. To illustrate that the BD model can be readily implemented on polymers with different molecular structures, it is applied to polyethylene with linear, ring, and star structures. For comparison purpose, the corresponding molecular dynamics (MD) simulation is also carried out on molecules with the same sizes (N = 30–73). To characterize the dynamics, time correlation functions of the end‐to‐end vector, the m‐to‐n vector, and the arm vector of the linear, ring, and star polyethylene are determined respectively. It is found that the longest relaxation times (τ1s), the relaxation times of the vectors (τv s), as well as zero‐shear viscosity (η0s) obtained from the BD and MD simulations agree well with each other. The time correlation functions can be reasonably described using the eigenmodes.

A Continuum Model of Mucosa with Glycan‐Ion Pairing

AbstractAdvances in the study of glycosoaminoglycan biohydrogels, label‐free electrokinetic analysis of soft‐diffuse layers in contact with saline solutions, and elucidation of ion‐specific behavior in many biochemical systems offer the opportunity to marry these principal features in a new mathematical model of the mucosal glycocalyx. The model is based on the electroquasistatic subset of Maxwell's equations in the form of the steady‐state continuum Poisson–Boltzmann equation for electrostatics with explicit incorporation of pairwise binding of ions to fixed charged‐groups in the hydrogel. The pairwise association is modeled using reversible bimolecular reactions via stoichiometric dissociation constants that represent the rule of matching water affinities—the observation that similar hydration structures of the pair results in less dissociation. Applications of the model to specific gels and salts, including a heparin star polyethylene glycol (starPEG) biohydrogel and the airway surface liquid layer in cystic fibrosis, are presented to postulate some quantitative consequences of glycocalyx ion partitioning.

Spatiotemporal release of BMP-2 and VEGF enhances osteogenic and vasculogenic differentiation of human mesenchymal stem cells and endothelial colony-forming cells co-encapsulated in a patterned hydrogel

Reconstruction of large bone defects is limited by insufficient vascularization and slow bone regeneration. The objective of this work was to investigate the effect of spatial and temporal release of recombinant human bone morphogenetic protein-2 (BMP2) and vascular endothelial growth factor (VEGF) on the extent of osteogenic and vasculogenic differentiation of human mesenchymal stem cells (hMSCs) and endothelial colony-forming cells (ECFCs) encapsulated in a patterned hydrogel. Nanogels (NGs) based on polyethylene glycol (PEG) macromers chain-extended with short lactide (L) and glycolide (G) segments were used for grafting and timed-release of BMP2 and VEGF. NGs with 12kDa PEG molecular weight (MW), 24 LG segment length, and 60/40L/G ratio (P12-II, NG(10)) released the grafted VEGF in 10days. NGs with 8kDa PEG MW, 26 LG segment length, and 60/40L/G ratio (P8-I, NG(21)) released the grafted BMP2 in 21days. hMSCs and NG-BMP2 were encapsulated in a patterned matrix based on acrylate-functionalized lactide-chain-extended star polyethylene glycol (SPELA) hydrogel and microchannel patterns filled with a suspension of hMSCs+ECFCs and NG-VEGF in a crosslinked gelatin methacryloyl (GelMA) hydrogel. Groups included patterned constructs without BMP2/VEGF (None), with directly added BMP2/VEGF, and NG-BMP2/NG-VEGF. Based on the results, timed-release of VEGF in the microchannels in 10days from NG(10) and BMP2 in the matrix in 21days from NG(21) resulted in highest extent of osteogenic and vasculogenic differentiation of the encapsulated hMSCs and ECFCs compared to direct addition of VEGF and BMP2. Further, timed-release of VEGF from NG(10) in hMSC+ECFC encapsulating microchannels and BMP2 from NG(21) in hMSC encapsulating matrix sharply increased bFGF expression in the patterned constructs. The results suggest that mineralization and vascularization are coupled by localized secretion of paracrine signaling factors by the differentiating hMSCs and ECFCs.

Gelation characteristics, physico-mechanical properties and degradation kinetics of micellar hydrogels

Due to their high water content and diffusivity of nutrients and biomolecules, hydrogels are very attractive as a matrix for growth factor immobilization and in situ delivery of cells to the site of regeneration in tissue engineering. The formation of micellar structures at the nanoscale in hydrogels alters the spatial distribution of the reactive groups and affects the rate and extent of crosslinking and mechanical properties of the hydrogel. Further, the degradation rate of a hydrogel is strongly affected by the proximity of water molecules to the hydrolytically degradable segments at the nanoscale. The objective of this review is to summarize the unique properties of micellar hydrogels with a focus on our previous work on star polyethylene glycol (PEG) macromonomers chain extended with short aliphatic hydroxy acid (HA) segments (SPEXA hydrogels). Micellar SPEXA hydrogels have faster gelation rates and higher compressive moduli compared to their non-micellar counterpart. Owing to their micellar structure, SPEXA hydrogels have a wide range of degradation rates from a few days to many months as opposed to non-degradable PEG gels while both gels possess similar water contents. Furthermore, the viability and differentiation of mesenchymal stem cells (MSCs) is enhanced when the cells are encapsulated in degradable micellar SPEXA gels compared with those cells encapsulated in non-micellar PEG gels.

Time dependence of material properties of polyethylene glycol hydrogels chain extended with short hydroxy acid segments

The objective of this work was to investigate the effect of chemical composition and segment number (n) on gelation, stiffness, and degradation of hydroxy acid-chain-extended star polyethylene glycol acrylate (SPEXA) gels. The hydroxy acids included glycolide (G), L-lactide (L), p-dioxanone (D) and ɛ-caprolactone (C). Chain-extension generated water soluble macromers with faster gelation rates, lower sol fractions, higher compressive moduli, and a wide-ranging degradation times when crosslinked into a hydrogel. SPEGA gels with the highest fraction of inter-molecular crosslinks had the most increase in compressive modulus with n whereas SPELA and SPECA had the lowest increase in modulus. SPEXA gels exhibited a wide range of degradation times from a few days for SPEGA to a few weeks for SPELA, a few months for SPEDA, and many months for SPECA. Marrow stromal cells and endothelial progenitor cells had the highest expression of vasculogenic markers when co-encapsulated in the faster degrading SPELA gel.

In Vitro Release from Reverse Poloxamine/α-Cyclodextrin Matrices: Modelling and Comparison of Dissolution Profiles

Gels obtained by complexation of octablock star polyethylene oxide/polypropylene oxide copolymers (Tetronic 90R4) with α-cyclodextrin (α-CD) were evaluated as matrices for drug release. Both molecules are biocompatible so they can be potentially applied to drug delivery systems. Two different types of matrices of Tetronic 90R4 and α-CD were evaluated: gels and tablets. These gels are capable to gelifying in situ and show sustained erosion kinetics in aqueous media. Tablets were prepared by freeze-drying and comprising the gels. Using these two different matrices, the release of two model molecules, L-tryptophan (Trp), and a protein, bovine serum albumin (BSA), was evaluated. The release profiles of these molecules from gels and tablets prove that they are suitable for sustained delivery. Mathematical models were applied to the release curves from tablets to elucidate the drug delivery mechanism. Good correlations were found for the fittings of the release curves to different equations. The results point that the release of Trp from different tablets is always governed by Fickian diffusion, whereas the release of BSA is governed by a combination of diffusion and tablet erosion. © 2013 Wiley Periodicals, Inc. and the American Pharmacists Association J Pharm Sci 103:197–206, 2014

Synthesis and rheological investigation of model symmetric 3-arm star polyethylene

A variety of linear and 3-arm star polyethylene (PE) model polymers covering a wide range of molecular weight are synthesized by the living polymerization of butadiene and the subsequent hydrogenation. Several rheological parameters of these model linear and 3-arm star PE samples are analyzed for detecting the long chain branching (LCB) structure. It is found that the analyses based on zero shear viscosity, vGP plot and flow activation energy are very sensitive to the 3-arm star PEs. The information on the presence of LCB can be obtained with these methods even for low molecular weight samples, which can not be determined by GPC-MALLS. However the information about the LCB structure can not be obtained by the rheological methods alone.

Convenient Pd‐Catalyzed Synthesis of Large Unimolecular Star Polyethylene Nanoparticles

A simplistic convenient "arm-first" catalytic synthesis method is demonstrated to render soft unimolecular star polyethylene nanoparticles. Low-dispersity polyethylene arms of controllable length and topology are first synthesized via Pd-catalyzed "living" ethylene poly-merization. The subsequent addition of norbornadiene as a unique cross-linker renders the block polymer containing a short polynorbornadiene (PNBD) sequence. Efficient and rapid catalytic cross-linking of the PNBD sequences occurs in the polymer precipitation and drying steps to give rise to star polyethylene nanoparticles. The star polymers are featured with tunable arm length and topology, high molecular weight (as high as 1770 kg mol⁻¹), high arm numbers (as high as 88), and desirable average nano-particle size (29-72 nm).

Polyethyleneimine‐poly(ethylene glycol)‐star‐copolymers as efficient and biodegradable vectors for mammalian cell transfection

High molecular weight (MW) polyethyleneimine (PEI) has been successfully used for the transfection of a broad variety of cell lines. In contrast to low MW PEI, which exhibits low transfection efficiencies but also low cytotoxicity, high MW PEI-mediated transfection achieves much higher efficiencies but at the cost of cell viability; therefore its use in commercial scale transfection and clinical application is limited. In this work we address this problem by constructing biodegradable high MW PEI mimics built from low MW PEI building blocks. The end-groups of small 5-arm star polyethylene glycol (PEG) prepolymers were decorated with linear oligo-ethyleneimine (OEI)/PEI arms of various MW via azomethine linkages. The resultant PEI-PEG-star-copolymers were investigated for their ability to complex plasmid DNA. Polymer/DNA complexes were characterized using techniques such as dynamic light scattering and transmission electron microscopy. Having established their cytotoxicity limits, they were tested as gene delivery vehicles for the transfection of suspension adapted Chinese hamster ovary (CHO-S) cells under serum-free conditions and adherent human embryonic kidney cells (HEK293T) in serum containing medium. Our PEI-PEG-star-copolymers showed a reduced cytotoxicity compared to high MW PEI while maintaining the ability to complex plasmid DNA and transfect mammalian cells, with significant transfection efficiencies. The effects of the optimum parameters on the transfection of mammalian cells using such novel polymers are discussed.

Coarse-grained simulations of moderately entangled star polyethylene melts

In this paper, a previous coarse-grain model [J. T. Padding and W. J. Briels, J. Chem. Phys. 117, 925 (2002)] to simulate melts of linear polymers has been adapted to simulate polymers with more complex hierarchies. Bond crossings between highly coarse-grained soft particles are prevented by applying an entanglement algorithm. We first test our method on a virtual branch point inside a linear chain to make sure it works effectively when linking two linear arms. Next, we apply our method to study the diffusive and rheological behaviors of a melt of three-armed stars. We find that the diffusive behavior of the three-armed star is very close to that of a linear polymer with the same molecular weight, while its rheological properties are close to those of a linear chain with molecular mass equal to that of the longest linear sub-chain in the star.

A Pd–diimine catalytic inimer for synthesis of polyethylenes of hyperbranched-on-hyperbranched and star architectures

A Pd-diimine catalytic inimer containing uniquely catalytic, initiating, and monomeric functionalities in one catalyst molecule is designed. It enables the first self-condensing vinyl copolymerization of ethylene, leading to polyethylenes of a hyperbranched-on-hyperbranched architecture. Meanwhile, it also facilitates the synthesis of star polyethylenes by tandem UV-coordinative polymerization.

Quantification of Branching in Model Three-Arm Star Polyethylene

The versatility of a novel scaling approach in quantifying the structure of model well-defined 3-arm star polyethylene molecules is presented. Many commercial polyethylenes have long side branches, and the nature and quantity of these branches varies widely among the various forms. For instance, low-density polyethylene (LDPE) is typically a highly branched structure with broad distributions in branch content, branch lengths and branch generation (in hyperbranched structures). This makes it difficult to accurately quantify the structure and the inherent structure–property relationships. To overcome this drawback, model well-defined hydrogenated polybutadiene (HPB) structures have been synthesized via anionic polymerization and hydrogenation to serve as model analogues to long-chain branched polyethylene. In this article, model 3-arm star polyethylene molecules are quantified using the scaling approach. Along with the long-chain branch content in polyethylene, the approach also provides unique measurements...

“Arm-First” Synthesis of Core-Cross-Linked Multiarm Star Polyethylenes by Coupling Palladium-Catalyzed Ethylene “Living” Polymerization with Atom-Transfer Radical Polymerization

We report in this article the “arm-first” synthesis of core–shell-structured multiarm polyethylene (PE) star polymers having multiple linear-but-branched PE arms joined at a cross-linked polydivinylbenzene (polyDVB) core. This synthesis is achieved in two steps by coupling two mechanistically incompatible polymerization techniques, Pd-catalyzed coordinative ethylene “living” polymerization and atom-transfer radical polymerization (ATRP). Ethylene “living” polymerization was first carried out using a functionalized Pd–diimine catalyst, [(ArN═C(Me)–(Me)C═NAr)Pd(CH2)3C(O)O(CH2)2OC(O)C(CH3)2Br]+SbF6– (Ar = 2,6-(iPr)2C6H3) (1), to directly synthesize narrow-distributed PE macroinitiators (MIs) containing an end-capping 2-bromoisobutyryl group active for initiating ATRP. Featured with controllable molecular weights at low polydispersity, the PE MIs are employed subsequently in the second step to initiate cross-linking polymerization of divinylbenzene (DVB) via ATRP to obtain the core-cross-linked star polymers. As a demonstration, three PE MIs at different lengths (number-average molecular weight of 7.3, 10.3, and 13.7 kg/mol, respectively) were specifically synthesized and employed for star construction. In the ATRP step, the effects of the various polymerization parameters, including MI concentration, the molar ratio of DVB to MI, and MI length, on the polymerization kinetics, star yield, average arm number, and average molecular weights of the star polymers were investigated systematically. By controlling the polymerization parameters, a range of PE star polymers having narrow-distributed arm lengths (7.3–13.7 kg/mol) and controllable average arm numbers (ca. 5–43 per star) have thus been successfully synthesized. A study on dilution solution properties of these star polymers having various structural parameters reveals their spherical chain conformation and resemblance of rigid spheres and high-generation dendrimers, with their intrinsic viscosity depending primarily on arm length while not on arm number or polymer molecular weight.