Standard Transmission Protocols Research Articles

Field Test Method and Equivalence Analysis of Delay Characteristics of DC Electronic Current Transformer

DC electronic current transformer is the data source of the system control and protection device, so its measurement delay has always been concerned. In this paper, the DC current transformer is modelled equivalently and the key factors affecting the delay of shunt and the remote module are analyzed. A field test method for the delay characteristics of the DC electronic current transformer is proposed. Moreover, a complex multi-state large current generator and integrated test system are developed. On the basis of the IEC 60044-8 standard transmission protocol, the accuracy of standard signal acquisition with the shunt is better than 0.2%. The maximum output current of the established testing system is 600 A. Based on the field test in an actual HVDC project, transient step and various frequency signal components are applied for analyzing.

Multiplexed, data structure-based enriched physiological event marker system

Event Abstract Back to Event Multiplexed, data structure-based enriched physiological event marker system Derek Rollend1* and Marcos Osorno1 1 JHU/APL, United States "As has been stressed by international scientific standards committees, event markers allow for the alignment of experiment events with their associated physiological data in the post-processing phase of an experiment and are crucial for providing context in recorded measurements [1]. Current physiological data file formats only afford rudimentary event encoding schemes, including hexadecimal event codes with a separate user-defined lookup table file, and time-stamped experiment annotations [2, 3]. The latter requires synchronizing the data acquisition system and annotation-generating software. It becomes desirable then to simultaneously generate and record both experiment events and metadata (annotations) from multiple subjects in a unified form that is compatible with existing physiological data file formats. To meet these goals, an alternative event marker method was developed. A data structure, loosely based on standard transmission protocol structures, was used in order to contain both an event description and a payload of associated event metadata or experiment behavioral data. This event marker system has been successfully demonstrated in an ongoing psychophysiological experiment where the total expected number of participants is between 100-200 volunteers. To alleviate the bookkeeping burden during the analysis phase of the experiment, participant identification, experiment identification, participant roles, and behavioral metadata have been packaged within event markers. This has enabled 1) human-readable, meaningful event descriptions to be overlaid on recorded EEG, ECG, EOG, and GSR signals, 2) quantifiable behavioral data for post-processing and machine learning based analysis, and 3) backup participant meta-data contained within the data file for information consistency checking during analysis. 1. Nuwer, Marc R. et al. "FCN Standards IFCN standards for digital recording of clinical EEG." Electroencephalography and Clinical Neurophysiology, Volume 106, Issue 3, 1998, Pages 259-261, ISSN 0168-5597. 2. Velde, Maarten van de et al. "Digital archival and exchange of events in a simple format for polygraphic recordings with application in event related potential studies." ISSN 0013-4694, http://dx.doi.org/10.1016/S0013-4694 (98)00029-7. 3. Kemp, B. Olivan, J. "European data format 'plus' (EDF+)." ISSN 1388-2457, 10.1016/S1388-2457(03)00123-8." Keywords: Electrophysiology, method development, event marker system, Software Development, computational neuroscience Conference: 5th INCF Congress of Neuroinformatics, Munich, Germany, 10 Sep - 12 Sep, 2012. Presentation Type: Poster Topic: Neuroinformatics Citation: Rollend D and Osorno M (2014). Multiplexed, data structure-based enriched physiological event marker system. Front. Neuroinform. Conference Abstract: 5th INCF Congress of Neuroinformatics. doi: 10.3389/conf.fninf.2014.08.00096 Copyright: The abstracts in this collection have not been subject to any Frontiers peer review or checks, and are not endorsed by Frontiers. They are made available through the Frontiers publishing platform as a service to conference organizers and presenters. The copyright in the individual abstracts is owned by the author of each abstract or his/her employer unless otherwise stated. Each abstract, as well as the collection of abstracts, are published under a Creative Commons CC-BY 4.0 (attribution) licence (https://creativecommons.org/licenses/by/4.0/) and may thus be reproduced, translated, adapted and be the subject of derivative works provided the authors and Frontiers are attributed. For Frontiers’ terms and conditions please see https://www.frontiersin.org/legal/terms-and-conditions. Received: 21 Mar 2013; Published Online: 27 Feb 2014. * Correspondence: Dr. Derek Rollend, JHU/APL, Laurel, United States, derek.rollend@jhuapl.edu Login Required This action requires you to be registered with Frontiers and logged in. To register or login click here. Abstract Info Abstract The Authors in Frontiers Derek Rollend Marcos Osorno Google Derek Rollend Marcos Osorno Google Scholar Derek Rollend Marcos Osorno PubMed Derek Rollend Marcos Osorno Related Article in Frontiers Google Scholar PubMed Abstract Close Back to top Javascript is disabled. Please enable Javascript in your browser settings in order to see all the content on this page.

Photonics-oriented data transmission network for the KM3NeT prototype detector

The design of the readout and data acquisition system of the future KM3NeT neutrino telescope employs 10Gbps photonic technologies for data transmission to shore. The photonic architecture can handle standard transmission protocols. The generic scheme is based on DWDM technology using lasers on shore and optical modulators in each of the 12,800 Digital Optical Modules arranged on several hundred vertical detection units anchored to the seabed. Each module will house 31 photomultipliers together with auxiliary instrumentation and readout electronics. A 100km electro-optical fibre cable will connect the optical modules to the store. The readout system will guarantee an individual optical connection between each optical module and the shore. A small-scale prototype of a detection unit with four optical modules is in a realization phase and will allow for in situ testing of the data transmission network. We will present results of laboratory tests of the photonics-oriented transmission layer of the network that have been realized for the prototype detection unit.

Determination of best shortened linear codes

The quality of a block code is determined by its capability to protect data against undetectable errors and by the number of check bits that are required for that purpose. For a given number of check bits there are codes with optimum bit error detecting capability in shortened block lengths. These codes are determined and tabulated. The residual error characteristics of some of the tabulated codes are compared with those specified in ISO/CCITT or IEC standard data transmission protocols. For block lengths and bit error rates that are typical in process control applications, the residual error rate of the determined codes is more than six orders of magnitude smaller than that of codes specified by widely used standard transmission protocols.