Standard Microfabrication Technologies Research Articles

A micromachined capillary electrophoresis chip with fully integrated electrodes for separation and electrochemical detection

A novel analytical microsystem with fully integrated electrodes for electrophoresis and amperometrical detection is described. With respect to the lab-on-a-chip concept a capillary electrophoresis (CE) microsystem has been fabricated with a total of six gold electrodes for sample injection, separation and electrochemical detection using standard microfabrication technologies. The device is a ready-to-use system that does not need any extra mechanical apparatus for electrode insertion. The CE-chip has successfully been tested by measuring hydrogen peroxide, ascorbic acid and uric acid simultaneously. All three oxidizable species could be detected in less than 70 s. Glucose was detected by performing an enzymatic reaction along the separation channel. The microsystem showed a very good reproducibility.

Patch-clamping of primary cardiac cells with micro-openings in polyimide films.

Patch-clamping is a powerful method for investigating the function and regulation of ionic channels. Currently, great efforts are being made to automate this method. As a step towards this goal, the feasibility of patch-clamping primary cells with a microscopic opening in a planar substrate was tested. Using standard microfabrication and ion beam technology, small-diameter openings (2 and 4 microm) were formed in polyimide films (thickness 6.5 microm). Single cells (sheep Purkinje heart cells, Chinese hamster ovary cells) in a suspension were positioned on top of the opening and sucked towards the opening to improve adhesion of the cell to the planar substrate, hence increasing the seal resistance. Voltage/current measurements yielded a median seal resistance of 1.3 Mohms with 4 microm openings (n=24) and 26.0 Mohms with 2 microm openings (n = 75), respectively. With 2 microm openings, successful loose-patch recordings of TTX-sensitive inward currents and action potentials in sheep Purkinje heart cells (n = 18) were made. In rare cases, gigaseals (n = 4) were also measured, and a whole-cell configuration (n = 1) could be established. It was concluded that the simple planar patch approach is suitable for automated loose-patch recordings from cells in suspension but will hardly be suitable for high-throughput whole-cell patch-clamping with high-resistance seals.

Gas detector with low-cost micromachined field ionization tips

This letter describes a low-cost fabrication of field ionization tips for gas detection application. The method addresses some of the most important aspects of micro gas detector technology; namely, manufacturing cost, sensitivity and reproducibility. The tips were designed and fabricated with standard microfabrication technologies: thermal oxidation, wet chemical etching and sputtering. However, the major achievement is the use of a low-resolution mask to position the tips very closely to a second electrode in a self-aligned process. In our investigation, the vaporized CH/sub 3/COOH was selected as the sample gas to measure the detector sensitivity. The minimum-measured sensitivity of the detector is 14 ppm and this was accomplished at an operating voltage of only 5 V.

Shear fatigue crack growth analysis in large-grain polycrystals: Chen, Q. Diss. Abstr. Int. (Dec. 1992) 53 (6), 269 pp

Present work describes the methylene blue tagged thiolated aptamer-modified gold micro-array based biosensor for specific detection of IFN-γ. The microchips with the microelectrode array were fabricated using standard silicon microfabrication technologies, and modified with methylene blue tagged aptamer using standard gold thiol chemistry. Electrodes were characterized and tested using Cyclic Voltammetric (CV) and Square Wave Voltammetry (SQW) measurements in a standard three-electrode format at room temperature. On an aptamer modified electrode, aptamer density was estimated to be about 4.4×1012 molecules/cm2. In IFN-γ studies, oxidation peak currents were found to decrease and more than 50% signal suppression was achieved at 500 ng/ml. Further, the magnitude of signal suppression was found to be logarithmically proportional to the IFN-γ in the concentration range of 1–500 ng/ml, with a detection limit of 1.3 ng/ml (i.e. 0.8 fmol in used sample volume of 10 µl). Biosensor showed negligible signal changes (5%) in a very high non-specific protein background, while still able to differentiate target protein IFN-γ at 5 ng/ml. The results indicated that our sensor binds selectively to target molecules, and the non-specific binding where adsorption of BSA protein molecules may be effectively omitted from consideration.