Total Length Research Articles

Length-weight relationship, condition factor, and diet analysis of thresher sharks (Family: Alopiidae) along the southern coast of India

Sharks are fascinating groups of elasmobranchs that are consistently threatened by commercial tuna fishing operations, as they share a common habitat with most scombrids. This raises ecological concerns to explore the vulnerability of the species in its prevailing ecosystem. The length-weight relationship of three known species of thresher sharks viz, the common thresher (Alopias vulpinus), bigeye thresher (A. superciliosus), and pelagic thresher (A. pelagicus) were estimated based on 771 specimens landed as bycatches from the commercial tuna gillnetter and multi-gear utilizing boats (MGUB) off Bay of Bengal between June 2022 and November 2023. The fork length (FL) ranged from a minimum of 51 cm to a maximum of 288 cm. The dominant fork length class for A. vulpinus, A. superciliosus, and A. pelagicus were 101–120, 101–140 cm, and 61–80 cm respectively. The estimated slope (b) values in the range between 2.48 and 2.66 reveal negative allometry for all three species. The coefficient of determination was highly significant with r2 values of 0.98–0.99. The male-to-female ratio for A. vulpinus (1.03:1) and A. superciliosus (1.07:1), were male-biased except for A. pelagicus, (1:1). We also present data on the foraging components of the bigeye thresher shark that typically comprised teleosts and cephalopods, with occasional crustacean prey. Biological data collection and constant surveillance would help better understand the population structure of this iconic marine species and preserve them from overexploitation.

Cypermethrin exposure: Implications for growth, phenotypic attributes, and biochemical responses in monosex tilapia (Oreochromis niloticus).

The present study was conducted to evaluate the effects of exposure to sublethal concentrations of cypermethrin on growth, phenotypic traits, and metabolic and antioxidant enzymes activities of monosex tilapia (Oreochromis niloticus). The median lethal concentration (LC50) of cypermethrin was initially ascertained to be 0.04 ppm after 12 h of exposure to three concentrations (0.04, 0.20, and 1.0 ppm) via the Probit analysis method. The sublethal exposures were obtained for 3 months at 0.0016, 0.008, and 0.04 ppm of cypermethrin. The growth performance, phenotypic traits, and enzymatic activity were analyzed. The research findings revealed a notable impact of cypermethrin on the growth performance of monosex tilapia, with a significant (p < 0.05) decrease in weight observed as the concentration increased. The experiment documented a significant change (p < 0.05) in the phenotypic traits of standard length, total length, tail length, trunk length, eye diameter, body area, and color patterns, but not dressing percentage. Furthermore, it was observed that the activities of amylase and protease in both the intestine and muscle decreased significantly (p < 0.05) with increasing concentrations of cypermethrin, except for amylase in the muscle, where no significant change was noted (p > 0.05). The results also demonstrated significant reductions (p < 0.05) in the activity of metabolic enzymes, specifically superoxide dismutase and catalase, following exposure to sublethal levels of cypermethrin. The study suggested that sublethal exposure of pyrethroid alters the growth, phenotypic traits, metabolic enzymes activities, and immunity of monosex tilapia.

DMR_Kmeans: Identifying Differentially Methylated Regions Based on k-means Clustering and Read Methylation Haplotype Filtering

Introduction:: Differentially methylated regions (DMRs), including tissue-specific DMRs and disease-specific DMRs, can be used in revealing the mechanisms of gene regulation and screening diseases. Up until now, many methods have been proposed to detect DMRs from bisulfite sequencing data. In these methods, differentially methylated CpG sites and DMRs are usually identified based on statistical tests or distribution models, which neglect the joint methylation statuses provided in each read and result in inaccurate boundaries of DMRs. Methods:: In this paper, a method, named DMR_Kmeans, is proposed to detect DMRs based on kmeans clustering and read methylation haplotype filtering. In DMR_Kmeans, for each CpG site, the k-means algorithm is used to cluster the methylation levels from two groups, and the methylation difference of the CpG is measured based on the different distributions in clusters. Methylation haplotypes of reads are employed to extract the methylation patterns in a candidate region. Finally, DMRs are identified based on the methylation differences and the methylation patterns in candidate regions. Result:: Comparing the performance of DMR_Kmeans and eight DMR detection methods on the whole genome bisulfite sequencing data of six pairs of tissues, the results show that DMR_Kmeans achieves higher Qn and Ql, and more overlapped promoters than other methods when given a certain threshold of methylation difference greater than 0.4, which indicates that the DMRs predicted by DMR_Kmeans with accurate boundaries contain less CpGs with small methylation differences than those by other methods. Conclusion:: Furthermore, it suggests that DMR_Kmeans can provide a DMR set with high quality for downstream analysis since the total length of DMRs predicted by DMR_Kmeans is longer and the total number of CpG sites in the DMRs is greater than those of other methods.

Revisi Peta Distribusi Ikan Padi (Adrianichthyidae: Oryzias spp.) Berdasarkan Identifikasi Morfologi di Paparan Sunda Indonesia

Members of the Adrianichthyidae family share typical distributions, as does the javanicus group, which inhabits western parts of Southeast Asia. Javanicus group members, specifically Oryzias javanicus and Oryzias hubbsi, is the only Adrianichthyidae species that can be spotted in Sundaland Indonesia. Morphological identification and the species distribution mapping of Oryzias specimens from Sundaland in this study were interpreted using ecoregional and dendogram tree approach. Specimens were collected from 11 areas representing five ecoregions in Sundaland Indonesia. Specimens were collected from islands of Java, Sumatra, Belitung and Kalimantan. Six individuals from each population of Oryzias were sampled for morphological identification. Specimens collected from estuaries were morphologically identified as O. javanicus and specimens from freshwater identified as O. hubbsi. Distribution of O. hubbsi from Salatiga is the first record from Central East Java (CEJ) ecoregion, which was previously only distributed in Southern Sumatra-Western Java (SWJ) ecoregion. Morphology of O. hubbsi from Sundaland Indonesia has mean of Standard Length (SL) 1.56 cm, Total Length (TL) 1.94 cm, Anal rays (A) 16, Pectoral rays (P) 8, and Dorsal rays (D) 6. Meanwhile, morphology of O. javanicus from Sundaland has mean of SL 2.07 cm, TL 2.56 cm, A 22, P 11, and D 6.

Prediction of slug length distribution in horizontal large-diameter gas/liquid pipeline systems

Large-diameter (ID ≥ 0.1524 m) pipeline network systems are widely used in the food industry for grain transportation, in the chemical and nuclear industries for steam/water thermal distribution systems, in the oil and gas industry for crude oil transportation and exploitation, and in urban water supply and drainage systems. Due to the favorable operational and geometrical conditions in surface gas/liquid pipelines, slug flow often prevails, dominating the horizontal and slightly inclined flow pattern map. Formed liquid slugs at large-diameter pipeline entrances and dip can grow, accelerate, and overtake other slugs, resulting in high-momentum and long slugs ranging in length from a few meters to a few hundred meters. The discrepancy of current mechanistic models to predict slug length in large diameter pipes, and the scarcity of large diameter slug length data motivated this work to propose a combined mechanistic and empirical approach to predict full slug length distribution in large diameter surface pipeline systems. A first-principle mechanistic mean slug length model is improved by optimizing its closure relationships using a large-diameter lab and field slug length database. Furthermore, an empirical large-diameter slug length standard deviation dimensionless model is proposed and statistically validated. The proposed mean and standard deviation slug length models are combined to construct a probability distribution and maximum slug length models. Validation of the proposed model revealed an absolute average error of 27% and 31% for the mean and maximum slug lengths, respectively, vastly outperforming all existing models.

Biomechanical evaluation of a central collinear entry reconstruction nail for femoral neck fracture prophylaxis

IntroductionReconstruction nails are commonly used to treat proximal femur fractures, with cephalic screw placement for femoral neck “prophylaxis” becoming standard practice. These implants are traditionally introduced through piriformis fossa (PF) or greater trochanter (GT) entry portals. A third “central collinear” (CC) portal has been proposed that allows entry along the femoral anatomic axis and central placement of cephalic screws. The present study aimed to quantify and compare the CC portal femoral neck strength with the two traditional (PF and GT) entry portals. Materials and MethodsEighteen cadaveric femur specimens (nine matched pairs) were divided into three groups using a balanced incomplete block design to control for variations in age and sex: (1) GT, (2) CC, and (3) PF entry points. Specimens and implants were cut to a standard length and instrumented with straight or valgus bend nails of appropriate laterality and two cephalic screws. Specimens were mounted on a custom jig replicating load distribution along the mechanical axis. A 100 N compressive preload was applied to the femoral head, followed by loading to failure at a rate of 10 mm/s until fracture, indicated by 30 % drop in axial force. Results: The three entry points did not differ in load-to-failureGT (6378.7 ± 1494.9 N), P (6912.4 ± 4924.1 N) and CC (7044.2 ± 2911.4 N) (P = 0.948) or maximum displacement, stiffness, and toughness. Most PF specimens failed at the basicervical neck, whereas most GT specimens failed at the subcapital neck; these differences were not significant. CC specimens failed evenly split between subcapital and basicervical. ConclusionThere were no significant difference in femoral neck load-to-failure after placement of a reconstruction nail through a CC entry portal when compared to both GT and PF entry. Clinically, this suggests the CC entry portal is a viable option when clinical considerations warrant its use.

Thermal transfer rate is slower in bigger fish: How does body size affect response time of small, implantable temperature recording tags?

AbstractThe recent miniaturisation of implantable temperature recording tags has made measuring the water temperatures fish experience in the wild possible, but there may be a body size‐dependent delay in implanted tag response time to changes in external temperature. To determine whether fish body size affects the response rate of implanted temperature tags, we implanted 20 Salvelinus fontinalis (127–228 mm fork length (FL), 15.1–120.4 g) with temperature recording tags and subjected them to rapid temperature changes (±8°C in less than 2 seconds) in the laboratory. We found that thermal transfer rates, and the lag in temperature tag response rate, was positively correlated with fish size, but the direction of temperature change (colder or warmer) had no significant effect. In fish exposed to a slower rate of temperature change (2°C h−1) implanted tags did not show a response lag. Understanding the limitations of this important technology is crucial to determining the utility of the data it produces and its ability to accurately measure fish thermal experience in the wild.

Oxynoemacheilus fatmae, a new species from the Güzelhisar Stream in the Aegean Sea basin, Türkiye (Teleostei: Nemacheilidae).

Oxynoemacheilus fatmae, a new species, is found in the Güzelhisar Stream in the northern Aegean Sea basin. It is differentiated from all other species of Oxynoemacheilus in the northern Aegean Sea and adjacent basins by having four to eight irregularly shaped narrow black bars on the posterior part of flank, and anterior parts of the flank with a marbled pattern. O. fatmae is differentiated from the closest species Oxynoemacheilus theophilii by having 14 fixed diagnostic nucleotide substitution sites, and the pair-wise genetic distance is 2.22%. It further differs from O. theophilii by having a slenderer body (body at dorsal-fin origin: 15%-17% standard length [SL] vs. 17%-18%), a slenderer caudal peduncle (10%-12% SL vs. 12%-13%), a more forked caudal fin (length of middle caudal-fin lope: 16%-19% SL vs. 19%-23%), and the absence the dorsal and ventral adipose crests on the caudal peduncle behind the vertical of the posterior anal-fin base (vs. present). Three species delimitation tests (assemble species by automatic partitioning (ASAP), automatic barcode gap discovery (ABGD) and generalized mixed yule-coalescent (GMYC)) and phylogenetic analyses reinforce the validity of O. fatmae as a distinct species.

Cost Optimization in Cloud Computing: Capacity Reservation for Intermittent Random Demand Surges

The adoption of cloud computing has been accelerating over the last decade, while enterprise cloud users (“firms”) are struggling to manage their growing cloud expenditures in the face of intermittent digital demand surges caused by planned or random events. To deal with such challenges, a firm can employ reserved instances with the standard contract length (e.g., one year) to meet the stationary base demand, which we refer to as the base contracts, complemented by additional reserved instances with either standard or shorter contract lengths, which we refer to as the supplementary contracts, to cope with the demand surges. We first analyze a model whereby the surge and inter-surge durations are deterministic, demand magnitude is random, and cancellation of the reservations is allowed. We develop a capacity management plan for the firm including not only the optimal capacity levels, which follow a newsvendor-type solution, but also the optimal policy for managing the purchase, renewal, cancellation, or expiration of the supplementary contracts, which can be characterized as a two-threshold policy. Due to the complexity of the structure of the optimal policy, we also construct an effective heuristic policy by excluding the renewal option from the action space, which can be applied to a more general setting where the surge and inter-surge durations are random. We examine two model extensions: (1) when trades of reserved instances are allowed in a secondary marketplace; (2) when the firm does not have exact information about the distributions of the surge magnitude and duration while it can adjust the capacity levels as data unveils. Our analysis shows that the optimal policy for managing the supplementary contracts depends on the relative magnitude of the surge and inter-surge durations in relationship to the cancellation fee. Moreover, our numerical results show that cloud platforms that offer a secondary marketplace are more attractive to firms from a cost standpoint than those that allow cancellation only. The latter, without the secondary marketplace, however, can achieve parity with the former by offering a deeper discount rate for the reserved instances, thereby bypassing the cost of administering the secondary marketplace.

Assessment of body metrics, weight, and carcass yields in dusky grouper (Epinephelus marginatus) through correlation and path analysis: Implications for optimizing genetic breeding programs

One of the objectives of aquaculture selective breeding programs is to enhance body conformation traits, often by using indirect criteria like correlation between live body measurements and carcass traits. This research investigated the relationship between live body measurements and carcass traits in dusky grouper (Epinephelus marginatus). We assessed the relationship between body measurements and carcass traits in 150 farmed dusky groupers with an average weight of 680 ± 221 g. The fish were measured for length, width, height, and length of head, and then processed to obtain weights (body, fillet, steaks, head, and residues) and yields (carcass, fillet, steaks, head, and residues). Path analysis was employed to estimate direct and indirect effects, with body part weight and yields as dependent variables and morphometric measurements and relationships as explanatory variables. The findings indicate that morphometric measurements can be used to estimate farmed dusky grouper body weights and carcass yields. Among the morphometric measurements and relationships examined, fish body height and standard length were identified as the main factors influencing variation in body weights and carcass yields.

Identification of Konosirus punctatus (Temminic and Schlegel, 1846) stocks in Korean waters via otolith shape analysis and comparison of growth parameters

Accurate identification of fish stocks is essential for the successful management of fishery resources. In this study, the populations of dotted gizzard shad, Konosirus punctatus, which is listed on the International Union for Conservation of Nature red list of the threatened species, were identified by combining two phenotypic methods: otolith shape analysis and comparison of growth parameters. Otolith shape analysis revealed two types of otoliths, pointing to the presence of two gizzard shad stocks in two areas along the Korean coast: the East Sea and the Yellow Sea + western Korean Strait. It is also supported by the result that the two stocks are significantly different in the shape indices (SI), and asymptotic fork length (FL∞). These results may be due to the influence of several environmental factors, such as temperature, salinity, and food availability. Overall, our findings suggest that there are two phenotypic stocks of K. punctatus in the Korean coastal waters and they should be managed differently.

New insights into the reproduction and migration of the porbeagle shark Lamna nasus (Bonnaterre 1788) in the Southwest Atlantic Ocean.

The objective of this study was to estimate the reproductive parameters of porbeagle shark in the Southwest Atlantic Ocean and thus characterize the adult fraction of this population. Therefore, 1012 specimens were measured by scientific observers on board the commercial trawl fleet operating south of 50° S. The size range of the specimens was from 77 to 292 cm fork length (LF). The mean size at maturity was estimated to be 153 cm LF for males and 172 cm LF for females. Porbeagle shark catches were recorded throughout the year, with the highest frequency occurring between November and June. The presence of pregnant females was observed from December to July, along with an increase in the average size of embryos in each litter. The information presented in this study improves the knowledge of the reproductive biology and allows to propose a migratory pattern of adult porbeagle females in the Southwest Atlantic Ocean. The likely seasonal increase in vulnerability of this shark to austral trawl fishery, despite all conservation management measures established in Argentina, underscores the importance of promoting its proper management and conservation given the need to improve understanding of porbeagle population dynamics in the Southern Hemisphere.

Prevention of malnutrition after one anastomosis gastric bypass: value of the common channel limb length

PurposeHypoalbuminemia and anemia are commonly observed indications for one anastomosis gastric bypass (OAGB) reversal and remain significant concerns following the procedure. Sufficient common channel limb length (CCLL) is crucial to minimize nutritional complications. However, limited literature exists regarding the impact of CCLL on OAGB outcomes. This study aimed to assess the effect of CCLL on weight loss and nutritional status in patients who underwent OAGB.MethodsA prospective cohort study was conducted from August 2021 to July 2022, involving 64 patients with a body mass index of 40–50 kg/m2. The standardized length of the biliopancreatic limb (BPLL) for all patients in this study was set at 175 cm. Additionally, the measurement of the common channel limb length (CCLL) was performed consistently by the same surgeon for all included patients.ResultsThe mean age and BMI of the patients were 39.91 ± 10.03 years and 43.13 ± 2.43 kg/m2, respectively, at the time of surgery. There was a statistically significant negative correlation between CCLL and percent total weight loss (%TWL) at the 12-month mark after OAGB (P = 0.02). Hypoalbuminemia was observed in one patient (1.6%), while anemia was present in 17 patients (26.6%) at the one-year follow-up. Statistical analysis revealed no significant difference in the incidence of anemia and hypoalbuminemia between patients with CCLL < 4 m and those with CCLL ≥ 4 m.ConclusionA CCLL of 4 m does not appear to completely prevent nutritional complications following OAGB. However, maintaining a CCLL of at least 4 m may be associated with a reduced risk of postoperative nutritional deficiencies.

A new species of Liobagrus Hilgendorf, 1878 (Teleostei, Siluriformes, Amblycipitidae) from the lower Changjiang River basin in southeast China

A new catfish species, Liobagrus chenhaojuni Chen, Guo &amp; Wu, sp. nov., is described from the Tiaoxi River, a tributary of Taihu Lake, located in Zhejiang Province, China. This description is based on morphological characteristics and phylogenetic analysis. This species belongs to a group defined by the presence of a smooth posterior edge of the pectoral-fin spine and can be distinguished from other species in the group by a unique combination of characteristics, including: an upper jaw longer than the lower jaw; maxillary barbels reaching the middle of the pectoral fin; irregular blotches present on the lateral body; a rounded caudal-fin with a length ranging from 16.5% to 19.9% of the standard length; 39 to 41 post-Weberian vertebrae; and 15 to 17 anal-fin rays. The validity of this new species is further supported by the molecular phylogenetic analysis based on Cytb sequences.

Ecomorphology of yellowtail lambari (Characiformes: Characidae) in the neotropical semi-arid region, Brazil

The ecomorphological patterns of the Astyanax lacustris in different environments (lotic and lentic) of the semiarid region of Pernambuco were analyzed using 25 linear morphometric measurements on 240 specimens (120 males and 120 females), with standard lengths ranging from 24.25 to 91.50 mm. These data were converted into 16 ecomorphological attributes and correlated with environmental characteristics. The principal component analysis (PCA) explained 81.64% (first and second components) of the data variation, highlighting sexual dimorphism in specimen size and noticeable variation among individuals of the same sex in different environments. Specimens from lotic environments showed higher caudal peduncle compression index (CPCI) values, while the pectoral fin aspect ration (PFAR) was more pronounced in lentic environments. Overall, females exhibited a wide morphometric variation. Analysis of linear morphometry in different water bodies indicated an intrinsic variation related to hydrodynamics linked to sexual dimorphism and water flow speed. Further studies are suggested to investigate whether factors such as macrophytes and different levels of water depth and flow contribute to this morphometric variation of species in the semi-arid region.

Range extension of Blackstripe Lizardfish, Synodus nigrotaeniatus Allen, Erdmann &amp;amp; Peristiwady, 2017 (Actinopterygii, Aulopiformes, Synodontidae), from Jakarta Bay, Indonesia

Three specimens (194.4&amp;ndash;203.8 mm standard lengths) of the lizard&amp;#64257;sh Synodus nigrotaeniatus Allen, Erdmann &amp; Peristiwady, 2017, collected from Jakarta Bay, western Indonesia, represent a signi&amp;#64257;cant range extension for the species, which was previously known from only six specimens collected in Lembeh Strait, North Sulawesi, eastern Indonesia. Morphological comparisons with available data from the type specimens and molecular data from the mitochondrial cytochrome oxidase subunit I (COI) gene are presented. The COI sequence data show a 4% genetic difference from the related Synodus sageneus Waite, 1905.

Changes in Digestive Enzyme Activities during Larval Development of Spotted Seatrout (Cynoscion nebulosus)

The spotted seatrout (Cynoscion nebulosus)—an important commercial species—has a high potential for aquaculture in the Gulf of Mexico. To optimize its feeding during larval rearing, this study aims to evaluate the primary gastric (pepsin), intestinal (leucine aminopeptidase and alkaline phosphatase), and pancreatic (alkaline protease, trypsin, chymotrypsin, amylase, and lipase) enzyme activities from hatching to day 30. A multivariate analysis identified three digestive enzyme development stages during the spotted seatrout larval transformation. The first stage occurred between 1 (mean ± standard error (SE) = 1.73 ± 0.14 millimeter (mm) standard length (SL)) and 3 (2.14 ± 0.07 mm SL) days after hatching (DAH); a period of digestive stability showed the highest activity in amylase and bile salt-dependent lipase. The second stage (from 4 (2.53 ± 0.09 mm SL) to 20 (10.92 ± 0.51 mm SL) DAH) was a period of digestive transition, during which leucine aminopeptidase, chymotrypsin, and alkaline proteases were identified as the predominant enzymes from 4 to 5 DAH. In the third stage—a period of digestive stability—pepsin was the major enzyme that occurred between 25 (16.51 ± 0.81 mm SL) and 30 (25.91 ± 0.82 mm SL) DAH. These results indicate that the spotted seatrout larvae have a digestive system adapted to lipids and carbohydrates at the onset of feeding, with an immediate transition to protein digestion when exogenous feeding begins. Additionally, the digestive system of the spotted seatrout may be considered mature at 25 DAH. Further research is needed to elucidate the mechanisms of digestive tract development in the spotted seatrout larvae.

Improved YOLOv8-Pose Algorithm for Albacore Tuna (Thunnus alalunga) Fork Length Extraction and Weight Estimation

Aiming at the problems of large statistical error and the poor real-time performance of catch weight in the ocean fishing tuna industry, an algorithm based on improved YOLOv8-Pose for albacore tuna (Thunnus alalunga) fork length extraction and weight estimation is proposed, with reference to the human body’s pose estimation algorithm. Firstly, a lightweight module constructed using a heavy parameterization technique is used to replace the backbone network, and secondly, a weighted bidirectional feature pyramid network BIFPN is utilized. Finally, the upper and lower jaw and tail feature points of the albacore tuna (Thunnus alalunga) were extracted using the key point detection algorithm, and the weight of the albacore tuna (Thunnus alalunga) was estimated based on the fitted relationship between fork length and weight. The experimental results show that the improved YOLOv8-Pose algorithm reduces the number of model parameters by 13.63% and the number of floating-point operations by 14.03% compared with the baseline model without decreasing the accuracy of the target detection and key point detection and improves the model inference speed by 374%. At the same time, it reduces the drift of the key point detection, and the error of the comparison with the actual albacore tuna (Thunnus alalunga) body weight is not more than 10%. The improved key point detection algorithm has high detection accuracy and inference speed, which provides accurate yield data for pelagic fishing and is expected to solve the existing statistical problems and improve the accuracy and real-time performance of data in the fishing industry.

Comparative evaluations on the canal-centering ability of novel heat-treated retreatment file system using nano-computed tomography

Abstract Introduction: The main goal of instrumentation during retreatment is to maintain the original curvature of the canal during retrieval of gutta-percha. The present study evaluates the canal-centering ability of two different retreatment file systems. Materials and Methods: Forty extracted single-rooted teeth were decoronated and obturated at the standardized root length of 16 mm. Samples were divided into two groups of each 20 single root teeth and they were instrumented using Solite RS3 Retreatment and ProTaper Retreatment files, respectively. Both pre- and postoperative nano-computed tomography scans were taken, and three-dimensional reconstruction was done for analysis. Sections of both the pre- and postoperative samples were taken at 7 mm, 5 mm, and 3 mm from the apex to calculate the canal-centering ratio. Independent t-test was used for statistical analysis between the two groups. Results: Solite RS3 retreatment files showed a significant difference at the 3 levels (P &lt; 0.000) compared to ProTaper retreatment files. Conclusion: From the above results, we can conclude that Solite RS3 caused minimal canal transportation and produced a relatively centered preparation in comparison to the ProTaper Retreatment system.

Interannual variability in dolphinfish Coryphaena hippurus Linnaeus, 1758 growth in the central-southeastern pacific ocean

The present research provides information on Coryphaena hippurus growth variability in the Central-Southeastern Pacific Ocean. For this purpose, fork length of 48 008 specimens obtained from artisanal fisheries (2006–2022) were used to analyze growth by the multi-model inference approach. According to the results, von Bertalanffy model best described species growth based on Akaike’s Information Criterion. Global growth parameters L∞ = 168.6 cm, k = 1.3, t0 = -0.04, indicated fast growth rates of dolphinfish during the study. This model presented growth and longevity values with greater biological coherence than the logistic and Gompertz models. Growth estimates between cohorts indicated that C. hippurus has interannual and decadal variations associated with the El Niño Southern Oscillation (ENSO) and decadal variation. The information in this study is essential for better understanding C. hippurus growth and serves as a basis for future actions on its management and conservation.