In this study, possibility of solidification crack-free welding of directionally solidified CM247LC and single crystal CMSX-4 superalloys was metallurgically investigated using single-mode fiber laser scanning. The key metallurgical factors of solidification cracking have been identified as the formation of highly misoriented solidification grain boundaries (low level of epitaxial growth behavior) at the fusion zone that affects the repulsive force between two adjacent dendrites and dendrite coalescence undercooling at the terminal stage of weld solidification. In particular, under extremely low heat input and ultra-high-speed laser beam scan conditions (welding speed: 1,000 mm/s, heat input: 2 J/mm, and energy density: 65 J/mm<sup>2</sup>), an effective fusion zone could be achieved within a single directionally solidified grain of CM247LC alloy owing to the characteristics of single-mode fiber laser. The fusion zone successfully showed a 99.9% of epitaxial growth achievement ratio (that is, low fraction of highly misoriented solidification grain boundaries at the fusion zone) without solidification cracking. Based on these results on CM247LC alloy, solidification crack-free welds could be successfully achieved using quadruple-pass and square-type weld geometries.