Stable Structure Research Articles

Rapid reactivation of long-term frozen preservation anammox granular sludge by biochar: Performance, mechanism and artificial neural network optimization

Anaerobic ammonia oxidation (Anammox) is an efficient nitrogen removal technology for wastewater, and has been successfully applied in practical wastewater treatment. The preservation and rapid reactivation of anammox bacteria (AnAOB) play an important role in the anammox application. Biochar has been widely used in the water treatment industry due to its stable structure, economic and environmental protection characteristics. Hence, this study used biochar to accelerate anammox granular sludge (AnGS) performance recovery after 60 d preservation under low-temperature frozen (−20 °C). The time of AnGS recovery in the group with biochar addition was shortened by 15 d than the natural recovery group. Meanwhile, biochar addition improved the shock loading resistance of the anammox system. EPS secretion, and the types and quantities of functional groups in EPS increased under biochar stimulation, especially tighter PN. The functional groups in biochar can act as electron shuttles during anammox process, accelerating the electron transfer rate. Biochar addition enhanced the relative abundance of AnAOB, especially Candidatus Brocadia. PICRUSt analysis indicated that biochar promoted key gene related to anammox process and accelerated the recovery of frozen sludge. In addition, the changes in effluent nitrogen removal efficiency were successfully predicted by artificial neural network modeling with R = 0.9895 and MSE = 0.0048. This result may provide a new technological idea for the rapid recovery of AnGS under long time frozen conditions.

Thermodynamic stability, electronic structure and mechanical properties of Mo-Re binary alloys: A first-principles calculations

Using first-principles calculations, we have systematically studied thermodynamic stability, electronic structure and mechanical properties of Mo-Re binary alloys. The alloying element Re prefers to occupy the substitution position with a formation energy of 0.10 eV in Mo rather than the tetrahedron/octahedron interstitial position. The charge transfers are obviously present between Re and Mo atoms, which can be confirmed by the Bader charge analysis. The density of states (DOS) demonstrates that the d orbitals of Re and Mo atoms are hybridized, revealing that Re and its adjacent Mo atoms can form the directional bond containing covalent components. On the basis of above studies on the most stable occupancy structure, the mechanical quantities (the elastic constants Cij, bulk modulus B, Young’s modulus E, shear modulus G, Poisson’s ratio v, and B/G) have been analyzed for three Mo-Re alloys with the low Re content, which are Mo127Re1, Mo53Re1 and Mo15Re1, respectively. All these mechanical quantities of both Mo127Re1 and Mo53Re1 alloys are nearly the same as that of perfect Mo, while all these mechanical quantities of Mo15Re1 alloy are obviously larger or smaller than that of perfect Mo. This demonstrates that Mo15Re1 alloy has significantly different mechanical characteristics from Mo127Re1 and Mo53Re1 alloys as well as perfect Mo. These results can provide a significant reference for the application of Mo-Re alloys in future fusion fields.

Silk nanoribbon films with enriched silk II structure and enhanced piezoelectricity for self-powered implantable and wearable devices

Piezoelectric biomaterials are intrinsically suitable to convert mechanical energy to electrical output and achieve electricity generation, in vivo/in vitro real-time monitoring, and sensing in biological systems. However, the inability to fabricate piezoelectric bio-materials with excellent piezoelectricity, full biodegradability, and good biocompatibility remains a challenge toward practical applications. As a solution, we present a bio-piezoelectric thin film with macroscopic piezoelectric output, high stability, fast response ability, flexibility, biocompatibility, and biodegradability based on nascent silk nanoribbons (SNRs) with high silk II-type structure. The solvent systems influence the meso/nanostructure and the piezoelectric performance of silk materials. Compared with other silk materials, the SNR fabricated by 2,2,6,6-tetramethylpiperidine-1-oxyl oxidation system (T-SNR) maintains higher silk II-type structure and more stable crystalline structure. The T-SNR film possesses electrostriction effect without electrical poling treatment. It presents an apparent piezoelectric constant (d33) of 7.7 pm/V and a piezoelectric voltage coefficient (g33) of 0.58 Vm/N, such values are superior to most reported bio-films. The piezoelectric T-SNR film can realize in vivo/in vitro real-time monitoring, sensing, and self-power ability. With its natural compatibility and degradability, the T-SNR film exhibits the potential for various implantable and wearable applications and may enable the development of fully biodegradable transient electromechanical devices.

Environmental heterogeneity caused by large-scale cultivation of Pyropia haitanensis shapes multi-group biodiversity distribution in coastal areas

The response of marine biodiversity to mariculture has long been a research focus in marine ecology. However, the effects of seaweed cultivation on biological community assembly are poorly understood, especially in diverse communities with distinct ecological characteristics. In this study, we used environmental DNA metabarcoding to investigate the spatial distribution patterns of bacterial, protistan, and metazoan diversity, aiming to reveal the mechanisms of community assembly in the Pyropia haitanensis cultivation zone along the Fujian coast, China. We found that, compared with the biological communities in control zones, those in P. haitanensis cultivation zones exhibited stronger geographic distance-decay patterns and displayed more complex and stable network structures. Deterministic processes (environmental selection) played a more important role in the assembly of bacterial, protistan, and metazoan communities in P. haitanensis cultivation zones, especially metazoan communities. Variance partitioning analysis showed that environmental variables made greater contributions to the diversity of the three types of communities within the P. haitanensis cultivation zones than in the control zones. Partial least squares path modeling analysis identified nitrate‑nitrogen (NO3-N), pH, particulate organic carbon (POC), and dissolved organic carbon (DOC) as the key environmental variables affecting biodiversity. Overall, the environmental heterogeneity caused by the large-scale cultivation of P. haitanensis could be the crucial factor influencing the composition and structure of various biological communities. Our results highlight the importance of the responses of multi-group organisms to the cultivation of seaweed, and provide insights into the coexistence patterns of biodiversity at the spatial scale.

Dynamic simulation of 3D-printed foods

Simulation environments for 3D-printed structures are crucial to assess failure modes prior to printing. Multi-ingredient additive manufacturing (AM) of food is particularly susceptible to failure due to differences in ingredient viscoelasticity. Current simulation software handles objects in their final fabricated form. Here, we present a simulation framework that digitally replicates the deposition process of disparate material pastes using a physics-based simulator. Our simulator takes a digital recipe file (G-code) as input and uses Bifrost—a plug-in for Autodesk Maya—to generate a digital replica of the 3D printing process. We ground truth our print simulator by successfully reproducing a custom designed seven-ingredient dessert. Designs that are dynamically simulated prior to being printed develops user intuition for stable structures, mitigates material waste, and enables faster proofing of printable designs to achieve structural and aesthetic creations.

When an underdog becomes a major player: the role of protein structural disorder in the Atg8 conjugation system.

The noncanonical ubiquitin-like conjugation cascade involving the E1 (Atg7), E2 (Atg3, Atg10), and E3 (Atg12-Atg5-Atg16 complex) enzymes is essential for incorporation of Atg8 into the growing phagophore via covalent linkage to PE. This process is an indispensable step in autophagy. Atg8 and E1-E3 enzymes are the first subset from the core autophagy protein machinery structures that were investigated in earlier studies by crystallographic analyses of globular domains. However, research over the past decade shows that many important functions in the conjugation machinery are mediated by intrinsically disordered protein regions (IDPRs) - parts of the protein that do not adopt a stable secondary or tertiary structure, which are inherently dynamic and well suited for protein-membrane interactions but are invisible in protein crystals. Here, we summarize earlier and recent findings on the autophagy conjugation machinery by focusing on the IDPRs. This summary reveals that IDPRs, originally considered dispensable, are in fact major players and a driving force in the function of the autophagy conjugation system. Abbreviation: AD, activation domain of Atg7; AH, amphipathic helix; AIM, Atg8-family interacting motif; CL, catalytic loop (of Atg7); CTD, C-terminal domain; FR, flexible region (of Atg3 or Atg10); GUV, giant unilammelar vesicles; HR, handle region (of Atg3); IDPR, intrinsically disordered protein region; IDPs: intrinsically disordered proteins; LIR, LC3-interacting region; NHD: N-terminal helical domain; NMR, nuclear magnetic resonance; PE, phosphatidylethanolamine; UBL, ubiquitin like.

Surface Encapsulation of Layered Oxide Cathode Material with NiTiO3 for Enhanced Cycling Stability of Na-Ion Batteries

Abstract In Na-ion batteries, O3-type layered oxide cathode materials encounter challenges such as particle cracking, oxygen loss, electrolyte side reactions, and multi-phase transitions during the charge/discharge process. This study focuses on surface coating with NiTiO3 achieved via secondary heat treatment using a coating precursor and the surface material. Through in-situ X-ray diffraction (XRD) and differential electrochemical mass spectrometry (DEMS), along with crystal structure characterizations of post-cycling materials, it was determined that the NiTiO3 coating layer facilitates the formation of a stable lattice structure, effectively inhibiting lattice oxygen loss and reducing side reaction with the electrolyte. This enhancement in cycling stability is evidenced by a capacity retention of approximately 74% over 300 cycles at 1C, marking a significant 30% improvement over the initial sample. Furthermore, notable advancements in rate performance were observed. Experimental results indicate that a stable and robust surface structure substantially enhances the overall stability of the bulk phase, presenting a novel approach for designing layered oxide cathodes with higher energy density.

Quantum barriers engineering toward radiative and stable perovskite photovoltaic devices

Efficient photovoltaic devices must be efficient light emitters to reach the thermodynamic efficiency limit. Here, we present a promising prospect of perovskite photovoltaics as bright emitters by harnessing the significant benefits of photon recycling, which can be practically achieved by suppressing interfacial quenching. We have achieved radiative and stable perovskite photovoltaic devices by the design of a multiple quantum well structure with long (∼3 nm) organic spacers with oleylammonium molecules at perovskite top interfaces. Our L-site exchange process (L: barrier molecule cation) enables the formation of stable interfacial structures with moderate conductivity despite the thick barriers. Compared to popular short (∼1 nm) Ls, our approach results in enhanced radiation efficiency through the recursive process of photon recycling. This leads to the realization of radiative perovskite photovoltaics with both high photovoltaic efficiency (in-lab 26.0%, certified to 25.2%) and electroluminescence quantum efficiency (19.7 % at peak, 17.8% at 1-sun equivalent condition). Furthermore, the stable crystallinity of oleylammonium-based quantum wells enables our devices to maintain high efficiencies for over 1000 h of operation and >2 years of storage.

Analysing the drivers of smart city implementation using DEMATEL method

<p>Indian cities are becoming more and more populated, and the technological, environmental, social, political and economic infrastructure of those cities is deteriorating, necessitating the development of more innovative methods to enhance public utilities and services. The growth of smart cities encourages the creation of a stable, networked, and sustainable metropolitan structure. The “100 Smart Cities Mission” was started by the Indian government to encourage planned development. However, there is also a literature of criticisms on the used indicators by the smart city mission. A thorough investigation is necessary to identify the critical infrastructure, important resources, and development patterns for smart city planning. The purpose of my study is to achieve and move towards Smart City Mission goals in a holistic framework. This research paper proposes a weighted criteria to assess the eligibility factors identified from the literature studies of Smart City Mission, to analyze the complex relationships among the indicators, to develop a holistic approach and classify factors based on the drivers of dependence and implementation. The findings of this study shed light on the key drivers and barriers to the implementation of smart city initiatives. The DEMATEL method provided a valuable tool for analysing the complex interrelationships between different factors and identifying the most influential drivers. The results can guide policymakers, city managers, and other stakeholders in developing more effective strategies for smart city implementation. However, the study also highlights the need for further research to explore the context-specific factors that may affect the drivers of smart city implementation in different regions and cities. Overall, this study contributes to the growing body of literature on smart cities and provides practical insights for decision-makers seeking to promote sustainable and inclusive urban development.</p>

Research advances in nucleic acid drugs developed based on circular RNAs

The development and clinical application of nucleic acid drugs has been a trendy field. One of the notable examples is mRNA vaccines, which have been used in the fighting against SARS-CoV-2. With short development cycles and mature preparation processes, mRNA vaccines demonstrate advantages in the global supply and in response to virus mutations. Circular RNAs (circRNAs) are a group of nucleic acid molecules with more stable structure, longer half-life, and weaker immunogenicity than mRNAs. Studies have proven that circRNAs can efficiently express protein products, indicating their potential in drug development. Despite extensive studies on the biogenesis and biological functions of circRNAs, there is limited research on developing nucleic acid drugs based on circRNAs. This article provides an overview of circRNAs, including their basic information, synthesis routes, and mechanisms, and discusses the future development directions of this field, hoping to provide inspiration for the research and development of drugs based on circRNAs.

From Collagen Mimetics to Collagen Hybridization and Back.

ConspectusFacilitated by the unique triple-helical protein structure, fibrous collagens, the principal proteins in animals, demonstrate a dual function of serving as building blocks for tissue scaffolds and as a bioactive material capable of swift renewal in response to environmental changes. While studies of triple-helical collagen mimetic peptides (CMPs) have been instrumental in understanding the molecular forces responsible for the folding and assembly of triple helices, as well as identifying bioactive regions of fibrous collagen molecules, single-strand CMPs that can specifically target and hybridize to denatured collagens (i.e., collagen hybridizing peptides, CHPs) have proven useful in identifying the remodeling activity of collagen-rich tissues related to development, homeostasis, and pathology. Efforts to improve the utility of CHPs have resulted in the development of new skeletal structures, such as dimeric and cyclic CHPs, as well as the incorporation of artificial amino acids, including fluorinated proline and N-substituted glycines (peptoid residues). In particular, dimeric CHPs were used to capture collagen fragments from biological fluid for biomarker study, and the introduction of peptoid-based collagen mimetics has sparked renewed interest in peptidomimetic research because peptoids enable a stable triple-helical structure and the presentation of an extensive array of side chain structures offering a versatile platform for the development of new collagen mimetics.This Account will cover the evolution of our research from CMPs as biomaterials to ongoing efforts in developing triple-helical peptides with practical theranostic potential in targeting denatured and damaged collagens. Our early efforts in functionalizing natural collagen scaffolds via noncovalent modifications led to the discovery of an entirely new use of CMPs. This discovery resulted in the development of CHPs that are now used by many different laboratories for the investigation of pathologies associated with changes in the structures of extracellular matrices including fibrosis, cancer, and mechanical damage to collagen-rich, load-bearing tissues. Here, we delve into the essential design features of CHPs contributing to their collagen binding properties and practical usage and explore the necessity for further mechanistic understanding of not only the binding processes (e.g., binding domain and stoichiometry of the hybridized complex) but also the biology of collagen degradation, from proteolytic digestion of fibrils to cellular processing of collagen fragments. We also discuss the strengths and weaknesses of peptoid-based triple-helical peptides as applied to collagen hybridization touching on thermodynamic and kinetic aspects of triple-helical folding. Finally, we highlight current limitations and future directions in the use of peptoid building blocks to develop bioactive collagen mimetics as new functional biomaterials.

Uncovering the lignin-degrading potential of Serratia quinivorans AORB19: insights from genomic analyses and alkaline lignin degradation

BackgroundLignin is an intricate phenolic polymer found in plant cell walls that has tremendous potential for being converted into value-added products with the possibility of significantly increasing the economics of bio-refineries. Although lignin in nature is bio-degradable, its biocatalytic conversion is challenging due to its stable complex structure and recalcitrance. In this context, an understanding of strain's genomics, enzymes, and degradation pathways can provide a solution for breaking down lignin to unlock the full potential of lignin as a dominant valuable bioresource. A gammaproteobacterial strain AORB19 has been isolated previously from decomposed wood based on its high laccase production. This work then focused on the detailed genomic and functional characterization of this strain based on whole genome sequencing, the identification of lignin degradation products, and the strain’s laccase production capabilities on various agro-industrial residues.ResultsLignin degrading bacterial strain AORB19 was identified as Serratia quinivorans based on whole genome sequencing and core genome phylogeny. The strain comprised a total of 123 annotated CAZyme genes, including ten cellulases, four hemicellulases, five predicted carbohydrate esterase genes, and eight lignin-degrading enzyme genes. Strain AORB19 was also found to possess genes associated with metabolic pathways such as the β-ketoadipate, gentisate, anthranilate, homogentisic, and phenylacetate CoA pathways. LC–UV analysis demonstrated the presence of p-hydroxybenzaldehyde and vanillin in the culture media which constitutes potent biosignatures indicating the strain’s capability to degrade lignin. Finally, the study evaluated the laccase production of Serratia AORB19 grown with various industrial raw materials, with the highest activity detected on flax seed meal (257.71 U/L), followed by pea hull (230.11 U/L), canola meal (209.56 U/L), okara (187.67 U/L), and barley malt sprouts (169.27 U/L).ConclusionsThe whole genome analysis of Serratia quinivorans AORB19, elucidated a repertoire of genes, pathways and enzymes vital for lignin degradation that widens the understanding of ligninolytic metabolism among bacterial lignin degraders. The LC-UV analysis of the lignin degradation products coupled with the ability of S. quinivorans AORB19 to produce laccase on diverse agro-industrial residues underscores its versatility and its potential to contribute to the economic viability of bio-refineries.

A Spatially Stable Crystal-Particle Gel to Trap Patchouli Oil for Efficient Colonic Drug Delivery.

Patchouli oil has exhibited remarkable efficacy in the treatment of colitis. However, its volatility and potential irritancy are often drawbacks when extensively used in clinical applications. Oil gel is a semisolid and thermoreversible system that has received extensive interest for its solubility enhancement, inhibition of bioactive component recrystallization, and the facilitation of controlled bioactive release. Therefore, we present a strategy to develop an oil gel formulation that addresses this multifaceted problem. Notably, a patchouli oil gel formulation was designed to solidify and trap patchouli oil into a spatially stable crystal-particle structure and colonic released delivery, which has an advantage of the stable structure and viscosity. The patchouli oil gel treatment of zebrafish with colitis improved goblet cells and decreased macrophages. Additionally, patchouli oil gel showed superior advantages for restoring the tissue barrier. Furthermore, our investigative efforts unveiled patchouli oil's influence on TRP channels, providing evidence for its potential role in mechanisms of anti-inflammatory action. While the journey continues, these preliminary revelations provide a robust foundation for considering the adoption of patchouli oil gel as a pragmatic intervention for managing colitis.

Pressure-induced evolution of structures and phase transition of technetium diboride

Using the particle swarm optimization algorithm, we conducted an extensive search for the high-pressure stable structure of technetium diboride (TcB2) within the pressure range of 0–400 GPa. At zero pressure, the P63/mmc (hP6-TcB2) structure is considered the ground state configuration. As the pressure increases, a structural transition from hP6-TcB2 to P6/mmm (hP3-TcB2) occurs at approximately 174.9 GPa. We discuss the bonding between the two distinct phases and analyze the contribution of different atomic bonds to maintaining their structural stability. Meanwhile, the temperature–pressure phase diagram of TcB2 was successfully determined for the first time through the quasi-harmonic approximation method. It is predicted that the transition pressure from hP6-TcB2 to hP3-TcB2 can be reduced to about 164 GPa at a room temperature of 300 K. These results provide valuable insights into the behavior of TcB2 under different temperature and pressure conditions and open up new possibilities for exploring its potential applications in a variety of environments.

Multi‐step heating strategy during thermal stabilization of polyacrylonitrile multi‐filament bundle before carbonization

AbstractA polyacrylonitrile (PAN) multi‐filament bundle underwent a multi‐step heat treatment following impregnation with a solution of ammonium bromide, phosphoric acid and urea (A‐P‐U). The multi‐step thermal stabilization process was conducted in an air atmosphere at temperatures ranging from 200 to 245 °C for various stabilization times spanning from 10 to 70 min. Comprehensive analysis of physical and mechanical properties, infrared (IR) spectroscopy, X‐ray diffraction (XRD) and thermal analysis (DSC and TGA) revealed the significant influence of stabilization time on the structure and properties of thermally stabilized PAN multi‐filament bundle. The fiber thickness and linear density of the stabilized fibers decreased by approximately 29.5% and 10.6%, respectively, after 70 min of heat treatment. However, the fiber density value increased from 1.18 to 1.38 g cm−3 during the same stabilization time. Additionally, the carbon yield value obtained using TGA increased from 31% to 73% at 850 °C. The presence of A‐P‐U markedly reduced the time needed for the conversion of the PAN polymer into a cyclized structure through its nitrile groups, thereby accelerating the stabilization reactions. Furthermore, the IR spectra exhibited the appearance of CC bonds, signaling the creation of a crosslinked ladder‐like structure. The XRD traces confirmed the decrease in crystallinity with increasing stabilization time, consistent with the findings from IR spectra. The findings showed that the A‐P‐U integrated system is notably successful and proficient in promoting the cyclization of nitrile groups, thereby decreasing the time needed to establish a thermally stable structure capable of withstanding elevated carbonization temperatures. © 2024 The Author(s). Polymer International published by John Wiley & Sons Ltd on behalf of Society of Chemical Industry.

Comparison of Novel 3D-printed Stepped Porous Metal Cones and Metaphyseal Sleeves for Reconstruction of Severe Knee Bone Defects: Short-term Clinical Outcomes.

Both porous metal cones and metaphyseal sleeves are excellent implants for reconstructing severe bone defects in the knee joint, but they both exhibit design limitations. The porous metal cone, especially, has significant room for improvement in its shape design. The existing porous metal cones often feature a conical external surface with a relatively small taper, potentially compromising both rotational and axial stability. To improve both axial and rotational stability in porous metal cones, we developed a 3D-printed stepped porous metal cone. This study aimed to assess the short-term clinical outcome of the 3D-printed stepped porous metal cone and to compare it with the clinical outcome of patients who underwent revision total knee arthroplasty (rTKA) with the metaphyseal sleeves during the same period. Patients who underwent total knee arthroplasty revision with metaphyseal bone defect reconstruction from 2019 to 2021 were retrospectively analyzed. A total of 61 patients were enrolled in the study, including 15 patients using 3D-printed stepped porous metal cones and 46 patients using metaphyseal metal sleeves. Thirty patients using metaphyseal sleeves were screened by propensity score matching method and compared with those using stepped cones. Analysis included the American Knee Society Score, the Hospital for Special Surgery knee score, the Western Ontario and McMaster Universities Arthritis index, the Short Form 12 (SF-12) health survey, and radiographic assessment with a mean follow-up of 28.5 ± 8.3 months. To conduct comparative analyses, unpaired Student's t-tests were employed for continuous variables, while categorical variables were analyzed using the appropriate Fisher exact or chi-squared test. In this study, the survival rates of both the stepped cone and metaphyseal sleeve were 100%. There was no statistically significant difference in postoperative knee function scores between the two groups (p > 0.05). However, patients in the cone group had significantly higher mental component summary scores on the SF-12 scale (p < 0.05) and higher increases in mean postoperative physical component summary scores than patients in the sleeve group (p < 0.05). In addition, patients in the cone group experienced fewer intraoperative and postoperative complications compared to the sleeve group. The 3D-printed stepped porous metal cone can effectively reconstruct bone defects in complex rTKA and provide satisfactory early clinical and radiographic results. The 3D-printed stepped cone provides a more stable structure similar to the sleeve while maintaining the original benefits of the cone making it a promising choice for rTKA.

Shape-Persistent Conductive Nerve Guidance Conduits for Peripheral Nerve Regeneration.

To solve the problems of slow regeneration and mismatch of axon regeneration after peripheral nerve injury, nerve guidance conduits (NGCs) have been widely used to promote nerve regeneration. Multichannel NGCs have been widely studied to mimic the structure of natural nerve bundles. However, multichannel conduits are prone to structural instability. Thermo-responsive shape memory polymers (SMPs) can maintain a persistent initial structure over the body temperature range. Electrical stimulation (ES), utilized within nerve NGCs, serves as a biological signal to expedite damaged nerve regeneration. Here, an electrospun shape-persistent conductive NGC is designed to maintain the persistent tubular structure in the physiological temperature range and improve the conductivity. The physicochemical and biocompatibility of these P, P/G, P/G-GO, and P/G-RGO NGCs are conducted in vitro. Meanwhile, to evaluate biocompatibility and peripheral nerve regeneration, NGCs are implanted in subcutaneous parts of the back of rats and sciatic nerves assessed by histology and immunofluorescence analyses. The conductive NGC displays a stable structure, good biocompatibility, and promoted nerve regeneration. Collectively, the shape-persistent conductive NGC (P/G-RGO) is expected to promote peripheral nerve recovery, especially for long-gap and large-diameter nerves.

Revisiting High-energy Polarization from Leptonic and Hadronic Blazar Scenarios

X-ray and MeV polarization can be powerful diagnostics for leptonic and hadronic blazar models. Previous predictions are mostly based on a one-zone framework. However, recent IXPE observations of Mrk 421 and 501 strongly favor a multizone framework. Thus, the leptonic and hadronic polarization predictions need to be revisited. Here we identify two generic radiation transfer effects, namely, double depolarization and energy stratification, that can have an impact on the leptonic and hadronic polarization. We show how they are generalized from previously known multizone effects of the primary electron synchrotron radiation. Under our generic multizone model, the leptonic polarization degree is expected to be much lower than the one-zone prediction, unlikely detectable in most cases. The hadronic polarization degree can reach a value as high as the primary electron synchrotron polarization during simultaneous multiwavelength flares, consistent with the one-zone prediction. Therefore, IXPE and future X-ray and MeV polarimeters such as eXTP, COSI, and AMEGO-X, have good chances to detect hadronic polarization during flares. However, the hadronic polarization cannot be well constrained during the quiescent state. Nonetheless, if some blazar jets possess relatively stable large-scale magnetic structures, as suggested by radio observations, a nontrivial polarization degree may show up for the hadronic model after a very long exposure time (≳1 yr).

Stable Structure and Fast Ion Diffusion: A Flexible MoO2@Carbon Hollow Nanofiber Film as a Binder-Free Anode for Sodium-Ion Batteries with Superior Kinetics and Excellent Rate Capability

Stable Structure and Fast Ion Diffusion: A Flexible MoO2@Carbon Hollow Nanofiber Film as a Binder-Free Anode for Sodium-Ion Batteries with Superior Kinetics and Excellent Rate Capability

Dynamics of mature myelin.

Myelin, which is produced by oligodendrocytes, insulates axons to facilitate rapid and efficient action potential propagation in the central nervous system. Traditionally viewed as a stable structure, myelin is now known to undergo dynamic modulation throughout life. This Review examines these dynamics, focusing on two key aspects: (1) the turnover of myelin, involving not only the renewal of constituents but the continuous wholesale replacement of myelin membranes; and (2) the structural remodeling of pre-existing, mature myelin, a newly discovered form of neural plasticity that can be stimulated by external factors, including neuronal activity, behavioral experience and injury. We explore the mechanisms regulating these dynamics and speculate that myelin remodeling could be driven by an asymmetry in myelin turnover or reactivation of pathways involved in myelin formation. Finally, we outline how myelin remodeling could have profound impacts on neural function, serving as an integral component of behavioral adaptation.