Stability Constants Research Articles

Accelerated de-chelation of EDTA-metal complexes: A novel and versatile approach for wastewater and solid waste remediation

Industrial waste, including wastewater and solid waste, often contains toxic heavy metals that necessitate extraction and separation prior to safe disposal or reusing them. Sewage sludge incineration ash (SSIA), a non-incinerable waste, holds significant amounts of heavy metals such as iron, zinc, copper, nickel, chromium, and lead. Recovery and reuse of heavy metals from SSIA and further application of treated SSIA sludge remain challenging. Ethylenediaminetetraacetic acid (EDTA) is widely used for heavy metals chelation in different applications. While its chelation with heavy metals is rapid and easy to achieve, the de-chelation of the metal complexes is otherwise slow (∼3 days) and challenging due to their high stability constants. In this study, we investigate the recovery of heavy metals from SSIA through chelation using EDTA, and develop, for the first time, a method to rapidly de-chelate the EDTA-metal complexes through the facile chilling process (1 – 3 h) that accelerates the separation of EDTA and metal ions. A sequential precipitation of high-purity heavy metals from the EDTA-metal complexes was demonstrated with and without de-chelation. This novel and versatile method allows the separation of many valuable compounds from the treated SSIA, including regenerated EDTA, potassium hexafluorosilicate, iron phosphate, iron(III) hydroxide, iron silicate, titanium phosphate, calcium phosphate, copper(I) thiocyanate, nickel bis(dimethylglyoximate), lead(II) sulfate, and zinc sulfide. This approach opens doors for more sustainable waste management and the recovery of valuable resources from industrial waste.

Capturing the perfluorobutane sulfonate by bambus[6], calix[6] and pillar[6] derivatives: Determination of stability constants by cellmetry method

Synthetic anion receptors are designed to increase the selectivity for anions. Neutral host ligands like bambus[6]uril or calix[6]cryptureas can ensure the stabilization of small anions by hydrogen bonds. The large and robust molecules have cavities in the form of tubes or baskets where the optimal size of the anion forms stable complexes. A new methodology was used to calculate the stability of some complexes, and based on the results, complexes of perfluorobutane sulfonate (PFBS–) were taken into consideration to analyze the stability of calix[6]arene and pillar[6]arene derivatives. The calculations showed reasonable logK values in some cases (logK ∼ 6–9) which can lead us to find a non-extreme way to extract the environmentally harmful species from nature.

Metal Complexes in Biology and Medicine: The System Cadmium (II)/ Iron (II)/ Zinc (II)- α- Aminobutyric Acid

Metal ions play an important role in biological systems. The importance of metal ions to essential functions of living systems and for wellbeing of living organisms is well known. Complexation reactions of α– aminobutyric acid with cadmium (II), iron (II) and zinc (II) have been studied in solution phase using paper ionophoretic technique. The present method is based upon the migration of a spot of metal ion on a paper strip at different pH values of background electrolyte containing 0.01M α -aminobutyric acid. A graph of pH against mobility was used to obtained information in the binary complexes and to calculate its stability constants. The logarithm stability constants of ML and ML2 complexes of α -aminobutyric acid were found to be (4.01 ± 0.02; 2.72 ± 0.01), (3.73 ± 0.03; 2.65 ± 0.09), (4.45 ± 0.02; 2.80 ± 0.03) for cadmium (II), iron (II) and zinc (II) complexes, respectively at ionic strength 0.1 molL-1 and a temperature of 35º C. Metal based drugs bioactivity can be increase by metal chelation, which in turn increase their absorbance and stability. Metal complexes can offer their action such as anti-inflammatory, anti-diabetic, antimicrobial, anticancer and ant thyroid compounds.

. Comparison of sorption properties of zoocompost in relation to Cd2+, Zn2+, Cu2+ ions

The study of relationships between zoocompost containing humic acids and metal ions is of great importance not only for predicting the redistribution of humic compounds and heavy metals in the environment, but also for developing methods for controlling the processes of migration of pollutants in natural environments, creating new materials for protecting the environment and remediating soils contaminated with heavy metal ions. The article compares the sorption capacity of zoocompost cultivated by the Black Lionfly fly, containing humic acids and to Zn2+, Cd2+, Cu2+ ions. It was established that with an increase in the dose of zoocompost, the concentration of heavy metal ions in the solution decreases and the cleaning efficiency reaches 94.6% for Cd2+, 75.2% for Zn2+ and 70.4% for Cu2+. A comparison of the stability constants of complex ions of cadmium, zinc and copper showed that more stable metal-humic acid complexes are formed by Cd2+ and Zn2+, while Cu2+ is characterized by a lower degree of connectivity. The obtained sorption isotherms and values of the sorption capacity of zoocompost for Cd2+ (0.490 mmol/g), Zn2+ (0.225 mmol/g) and Cu2+ (0.145 mmol/g) indicate the specific interaction between the heavy metal ions and functional groups of humic acids included in the composition of zoocompost, and also confirm the theoretical series of stability of chelates Cd < Zn < Cu.

Effect of Electrolysis Conditions on Electrodeposition of Cobalt-Tin Alloys, Their Structure, and Wettability by Liquids.

The aim of this study was a systematic analysis of the influence of anions (chloride and sulfate) on the electrochemical behavior of the Co-Sn system during codeposition from gluconate baths. The pH-dependent multiple equilibria in cobalt-tin baths were calculated using stability constants. The codeposition of the metals was characterized thermodynamically considering the formation of various CoxSny intermetallic phases. The alloys obtained at different potentials were characterized in terms of their elemental (EDS and anodic stripping) and phase compositions (XRD), the development of preferred orientation planes (texture coefficients), surface morphology (SEM), and wettability (water; diiodomethane; surface energy). The mass of the deposits and cathodic current efficiencies were strongly dependent on both the deposition potential and the bath composition. The morphology and composition of the alloys were mainly dependent on the deposition potential, while the effect of the anions was less emphasized. Two-phase alloys were produced at potentials -0.9 V (Ag/AgCl) and lower, and they consisted of a mixture of tetragonal tin and an uncommon tetragonal CoSn phase. The preferential orientation planes of tin grains were dependent on the cobalt incorporation into the deposits and anion type in the bath, while the latter did not affect the preferential orientation plane of the CoSn phase. The surface wettability of the alloys displayed hydrophobicity and oleophilicity originating from the hierarchical porous surface topography rather than the elemental or phase composition. The codeposition of the metals occurs within the progressive nucleation model, but at more electronegative potentials and in the presence of sulfate ions, a transition from progressive to instantaneous nucleation can be possible. This correlated well with the partial polarization curves of the alloy deposition and the texture of the tin phase.

Understanding the Complexation of Alkyl-Substituted Nitrilotriacetamides with Uranium: A Study by Absorption Spectroscopy and Microcalorimetry.

Complexation thermodynamics of UO22+ ions with a series of alkyl-substituted nitrilotriacetamides (NTA) was investigated by absorption spectroscopy and microcalorimetry. The hexamethyl derivative of NTA (HMNTA) forms the weakest two successive complexes with UO22+ ions with stability constants of log β11 = 3.5 ± 0.1 and log β12 = 6.1 ± 0.1. The formation constant values increased linearly with increasing alkyl chain length of the substituents from hexamethyl NTA to hexabutyl NTA (HBNTA) and to hexahexyl NTA (HHNTA). The complexation with each ligand was both enthalpy and entropy driven with exothermic enthalpy changes of ΔH11 = -14.7 ± 1.0 kJ/mol, ΔH12 = -10.2 ± 0.8 kJ/mol for HMNTA, ΔH11 = -19.2 ± 1.2 kJ/mol, ΔH12 = -16.4 ± 1.1 kJ/mol for HBNTA, and ΔH11 = -21.3 ± 1.4 kJ/mol, ΔH12 = -19.4 ± 2.3 kJ/mol for HHNTA. Similarly, the positive entropy changes with each ligand were ΔS11 = 18.1 ± 2.7 J/mol/K, ΔS12 = 82.9 ± 3.8 J/mol/K for HMNTA, ΔS11 = 14.4 ± 1.2 J/mol/K, ΔS12 = 87.2 ± 4.2 J/mol/K for HBNTA, and ΔS11 = 16.1 ± 2.4 J/mol/K, ΔS12 = 92.6 ± 3.1 J/mol/K for HHNTA. Structural features of the complex suggest the participation of two ligands coordinating in a bidentate mode via the carbonyl oxygens. The [UO2L2]2+ complexes appear to be noncentrosymmetric with two ligands and one water molecule occupying the equatorial plane of the dioxo uranyl cation. The structure of the complex was confirmed by 1H NMR titration, EXAFS measurements, and DFT calculations.

2,6-Bis(5-(tert-butyl)-1H-pyrazol-3-yl)pyridine: Effects of the Peripheral Aliphatic Side Chain on the Coordination of Actinides(III) and Lanthanides(III).

To improve our understanding of the interaction mechanism in trivalent lanthanide and actinide complexes, studies with structurally different hard and soft donor ligands are of great interest. For that reason, the coordination chemistry of An(III) and Ln(III) with 2,6-bis(5-(tert-butyl)-1H-pyrazol-3-yl)pyridine (C4-BPP) has been explored. Time-resolved laser fluorescence spectroscopy (TRLFS) studies have revealed the formation of [Cm(C4-BPP)n]3+ (n = 1-3) (log β1' = 7.2 ± 0.4, log β2' = 10.1 ± 0.5, and log β3' = 11.8 ± 0.6) and [Eu(C4-BPP)m]3+ (m = 1-2) (log β1' = 4.9 ± 0.2 and log β2' = 8.0 ± 0.4). The absence of the [Eu(C4-BPP)3]3+ complex shows a more favorable complexation of Cm(III) over that of Eu(III). Additionally, complementary NMR measurements have been conducted to examine the M(III)-N bond in Ln(III) and Am(III) C4-BPP complexes. 15N NMR data have revealed notable differences in the chemical shifts of the coordinating nitrogen atoms between the Am(III) and Ln(III) complexes. In the Am(III) complex, the coordinating nitrogen atoms have shown a shift by 260 ppm, indicating a higher fraction of covalent bonding in the Am(III)-N bond compared with the Ln(III)-N bond. This observation aligns excellently with the differences in the stability constants obtained from TRLFS studies.

Seasonal studies of aquatic humic substances from Amazon rivers: characterization and interaction with Cu (II), Fe (II), and Al (III) using EEM-PARAFAC and 2D FTIR correlation analyses.

Aquatic humic substances (AHS) are defined asan important components of organic matter, being composed as small molecules in a supramolecular structure and can interact with metallic ions, thereby altering the bioavailability of these species. To better understand this behavior, AHS were extracted and characterized from Negro River, located near Manaus city and Carú River, that is situated in Itacoatiara city, an area experiencing increasing anthropogenic actions; both were characterized as blackwater rivers. The AHS were characterized by 13C nuclear magnetic ressonance and thermochemolysis GC-MS to obtain structural characteristics. Interaction studies with Cu (II), Al (III), and Fe (III) were investigated using fluorescence spectroscopy applied to parallel factor analysis (PARAFAC) and two-dimensional correlation spectroscopy with Fourier transform infrared spectroscopy (2D-COS FTIR). The AHS from dry season had more aromatic fractions not derived from lignin and had higher content of alkyls moities from microbial sources and vegetal tissues of autochthonous origin, while AHS isolated in the rainy season showed more metals in its molecular architecture, lignin units, and polysacharide structures. The study showed that AHS composition from rainy season were able to interact with Al (III), Fe (III), and Cu (II). Two fluorescent components were identified as responsible for interaction: C1 (blue-shifted) and C2 (red-shifted). C1 showed higher complexation capacities but with lower complexation stability constants (KML ranged from 0.3 to 7.9 × 105) than C2 (KML ranged from 3.1 to 10.0 × 105). 2D-COS FTIR showed that the COO- and C-O in phenolic were the most important functional groups for interaction with studied metallic ions.

Controlling the Solubility, Release Rate and Permeation of Riluzole with Cyclodextrins.

Riluzole (RLZ), a sodium channel-blocking benzothiazole anticonvulsant BCS class II drug, is very slightly soluble in aqueous medium. To improve aqueous solubility and modulate dissolution rate and membrane permeability, complex formation of RLZ with two cyclodextrin, α-cyclodextrin (α-CD) and sulfobutylether-β-cyclodextrin (SBE-β-CD), was studied. The stability constants demonstrated a greater affinity of SBE-β-CD towards RLZ compared to α-CD. A solubility growth of 1.7-fold and 3.7-fold with α-CD and SBE-β-CD, respectively, was detected in the solutions of 1% cyclodextrins and accompanied by the permeability reduction. For 1% CD solutions, several biopolymers (1% w/v) were tested for the membrane permeability under static conditions. The synergistic positive effect of α-CD and polymer on the solubility accompanied by unchanged permeability was revealed in RLZ/α-CD/PG, RLZ/α-CD/PEG400, and RLZ/α-CD/PEG1000 systems. Solid RLZ/CD complexes were prepared. Dynamic dissolution/permeation experiments for the solid samples disclosed the characteristic features of the release processes and permeation rate through different artificial membranes. The maximal permeation rate was determined across the hydrophilic semi-permeable cellulose membrane followed by the lipophilic PermeaPad barrier (model of intestinal and buccal absorption) and polydimethylsiloxane-polycarbonate membrane (simulating transdermal delivery way). Different mode of the permeation between the membranes was estimated and discussed.

Evaluating solubility, stability, and inclusion complexation of oxyresveratrol with various β-cyclodextrin derivatives using advanced computational techniques and experimental validation

Oxyresveratrol (OXY), a natural stilbenoid in mulberry fruits, is known for its diverse pharmacological properties. However, its clinical use is hindered by low water solubility and limited bioavailability. In the present study, the inclusion complexes of OXY with β-cyclodextrin (βCD) and its three analogs, dimethyl-β-cyclodextrin (DMβCD), hydroxypropyl-β-cyclodextrin (HPβCD) and sulfobutylether-β-cyclodextrin (SBEβCD), were investigated using in silico and in vitro studies. Molecular docking revealed two binding orientations of OXY, namely, 4′,6′-dihydroxyphenyl (A-form) and 5,7-benzenediol ring (B-form). Molecular Dynamics simulations suggested the formation of inclusion complexes with βCDs through two distinct orientations, with OXY/SBEβCD exhibiting maximum atom contacts and the lowest solvent-exposed area in the hydrophobic cavity. These results corresponded well with the highest binding affinity observed in OXY/SBEβCD when assessed using the MM/GBSA method. Beyond traditional simulation methods, Ligand-binding Parallel Cascade Selection Molecular Dynamics method was employed to investigate how the drug enters and accommodates within the hydrophobic cavity. The in silico results aligned with stability constants: SBEβCD (2060 M−1), HPβCD (1860 M−1), DMβCD (1700 M−1), and βCD (1420 M−1). All complexes exhibited a 1:1 binding mode (AL type), with SBEβCD enhancing OXY solubility (25-fold). SEM micrographs, DSC thermograms, FT-IR and 1H NMR spectra confirm the inclusion complex formation, revealing novel surface morphologies, distinctive thermal behaviors, and new peaks. Notably, the inhibitory impact on the proliferation of breast cancer cell lines, MCF-7, exhibited by inclusion complexes particularly OXY/DMβCD, OXY/HPβCD, and OXY/SBEβCD were markedly superior compared to that of OXY alone.

Milk fat globule membrane proteins are crucial in regulating lipid digestion during simulated in vitro infant gastrointestinal digestion

Products of lipolysis released during digestion positively affect the metabolism of newborns. In contrast to the 3-layer biological membranes covering human milk (HM) fat, the lipid droplets in infant milk formula (IMF) are covered by a single membrane composed of casein and whey proteins. To reduce the differences in lipid structure between IMF and HM, studies have used milk fat globule membrane (MFGM) components such as milk polar lipids (MPL) to prepare emulsions mimicking HM fat globules However, few studies have elucidated the effect of membrane proteins (MP) on lipid digestion in infants. In this study, 3 kinds of emulsions were prepared: One with MPL as the interfaced of lipid droplets (RE-1), one with membrane protein concentrate (MPC) (RE-2) as the interface of lipid droplets, and one with both MPL and MPC (1:2) as the co-interface of lipid droplets (RE-3). The interfacial coverage of the emulsions was confirmed by measuring the contents of MPL and MPC at the lipid droplet interface, and by confocal laser scanning microscopy analyzed. By controlling the homogenization intensity, the specific surface area of lipid droplets was controlled at the same level among the 3 emulsions. The stability constants of the emulsions varied, and RE-1 was the most stable. During simulated in vitro infant gastrointestinal digestion, the amount of free fatty acids (FFA) released from the lipid droplets was significantly higher from those with MPC at the interface (RE-2, RE-3) than from that with MPL at the interface (RE-1). The amount of FFA released at the end of intestinal digestion of RE-1, RE-2, and RE-3 was 255.00 ± 3.54 µmol,328.75 ± 5.30 µmol, 298.50 ± 9.19 µmol, respectively. Compared with the lipid droplets in RE-2, those with MPL at the interface (RE-1, RE-3) released more unsaturated fatty acids (USFAs) during digestion. The emulsifying activity index was highest in RE-3 (MPL and MPC co-interface). The presence of MPL at the emulsion interface increased the release of USFAs, while the presence of MPC increased the release of FFA. These results show that both MPL and MP are indispensable in the construction of MFGM. Understanding their effects on digestion can provide new strategies for the development of infant foods.

Preparation, characterization, and in vitro cytogenotoxic evaluation of a novel dimenhydrinate-β-cyclodextrin inclusion complex.

Dimenhydrinate (DMH), used to alleviate motion sickness symptoms such as nausea, vomiting, dizziness, and vertigo, encounters limitations in oral pharmaceutical formulations due to its poor water solubility and bitter taste. Our research hypothesized that inclusion complexation with β-cyclodextrin (β-CD) might address these drawbacks while ensuring that the newly formed complexes exhibit no cytotoxic or genotoxic effects on peripheral blood mononuclear cells (PBMCs). Inclusion complexes were prepared using the kneading method and the solvent evaporation method. The phase solubility analysis, attenuated total reflectance-fourier transform infrared spectroscopy (ATR-FTIR), and differential scanning calorimetry (DSC) were conducted to evaluate the complexation efficacy and stability constant of the new binary systems. The results demonstrated that both methods provided complete and efficient complexation. Cytogenotoxic analysis, including the 3-[4,5-dimethylthiazol-2-yl]-2,5-diphenyl tetrazolium bromide (MTT) assay, alkaline comet assay, and cytokinesis-block micronucleus cytome (CBMN-cyt) assay, was conducted to assess the cytogenotoxic potential of DMH-β-CD inclusion complexes, a topic previously unexamined. No cytotoxic or genotoxic effects were observed within the concentration range of 36.36 to 109.09 ng/mL. Cell viability of treated PBMCs exceeded 85% for all tested concentrations. No significant increases in DNA strand breaks were observed at any dose, and tail intensity of all complexes remained lower or up to 2.2% higher than the negative control. Parameters indicating genotoxic effects, as well as cytotoxic and cytostatic potential in the CBMN-cyt assay, did not significantly differ from untreated controls. These results suggest that inclusion complexation with β-CD might be a safe and promising solution to overcome the limitations of poor solubility and unpleasant taste of DMH, potentially providing opportunities for new and improved oral pharmaceutical dosage forms.

Polyaromatic Hydrocarbon Inclusion Complexes with 2-Hydroxylpropyl-β/γ-Cyclodextrin: Molecular Dynamic Simulation and Spectroscopic Studies.

In aqueous and solid media, 2-HP-β/γ-CD inclusion complexes with poly aromatic hydrocarbon (PAH) Phenanthrene (PHN), Anthracene (ANT), Benz(a)pyrene (BaP), and Fluoranthene (FLT) were investigated for the first time. The inclusion complexes were characterized and investigated using fluorescence and 1HNMR spectroscopy. The most prevalent complexes consisting of both guests and hosts were those with a 1:1 guest-to-host ratio. The stability constants for the complexes of PHN with 2-HP-β-CD and 2-HP-γ-CD were 85 ± 12 M-1 and 49 ± 29 M-1, respectively. Moreover, the stability constants were found to be 502 ± 46 M-1 and 289 ± 44 M-1 for the complexes of ANT with both hosts. The stability constants for the complexes of BaP with 2-HP-β-CD and 2-HP-γ-CD were (1.5 ± 0.02) × 103 M-1 and (9.41 ± 0.03) × 103 M-1, respectively. The stability constant for the complexes of FLT with 2-HP-β-CD was (1.06 ± 0.06) × 103 M-1. However, FLT was observed to form a weak complex with 2-HP-γ-CD. Molecular dynamic (MD) simulations were used to investigate the mechanism and mode of inclusion processes, and to monitor the atomic-level stability of these complexes. The analysis of MD trajectories demonstrated that all guests formed stable inclusion complexes with both hosts throughout the duration of the simulation time, confirming the experimental findings. However, the flexible Hydroxypropyl arms prevented the PAHs from being encapsulated within the cavity; however, a stable exclusion complex was observed. The main forces that influenced the complexation included van der Waals interactions, hydrophobic forces, and C-H⋯π interaction, which contribute to the stability of these complexes.

Study on hydrolytic stability constant of U(IV) by titration

Study on hydrolytic stability constant of U(IV) by titration

17-β-Estradiol—β-Cyclodextrin complex as an aqueous solution: Structural and physicochemical characterization supported by MM and QM calculations

17-β-estradiol (EST) is an Active Pharmaceutical Ingredient characterized by a low water solubility. Complexation with β-cyclodextrin (βCD) enhances its bioavailability, hence such complex is an interesting research object from pharmaceutical point of view. However, basic facts like description of complex's structure and definition of its molar ratio, were debatable already for decades. This work for the first time justifies the EST:βCD molar ratio as 1:2 using the HRMS (high-resolution mass spectrometry) and phase solubility studies. The latter are used to define complex stability constant, as well. The structure and stability is analyzed using a variety of computational approaches: Quantum Mechanics (QM) based methods (DFT, semiempirical approaches) and MD/MMGBSA approach. In case of the QM, for the first time in the computational analysis of cyclodextrin complexes, a thorough benchmarking test is presented. Different computational parameters (solvent model, presence/absence of dispersion correction etc.) are used. Obtained results are compared with the experimental data.

Fixed-bed column adsorption of Ge(IV) using catechol-based adsorbents and aqueous complexation modeling to understand Ge(IV) selectivity

An efficient production process that can selectively recover the critical element germanium (Ge) from dilute sources is necessary to address the criticality of Ge. In this study, functionalized polystyrenic beads with catechol (A-Cat), nitro-catechol (A-Cat-N), and pyrogallol (A-Py) were used in a fixed-bed column to recover Ge and the Ge selectivity in the presence of competing ions, the effect of flow rate and inlet concentration, breakthrough modeling, and regeneration and reuse were investigated. Additionally, the synthesized adsorbent A-Cat was compared with commercially available N-methylglucamine resin for recovering Ge from synthetic Zn refinery residues solution. All three adsorbents showed Ge adsorption (>25 mg/g) and good desorption in single-element solution. The adsorbents were selective for Ge(IV) in a multiple-element solution containing 15 elements, and concentrated Ge solution was obtained with A-Cat after elution. The Modified Dose-Response model best explained the breakthrough curve compared to the Thomas and Yoon-Nelson model. Lower flow rates and higher inflow concentration both resulted in higher Thomas adsorption capacity (30 mg/g at 9 bed volumes per hour (BVH) and 62.8 mg/g at 80 mg/L Co). The adsorbent A-Cat showed great regeneration while retaining >70 % capacity at the end of 5 adsorption–desorption cycles. A-Cat was also selective for Ge in synthetic Zn refinery residue solution containing 10 times Fe and 20 times Cu and Zn. Commercial N-methylglucamine resin showed low selectivity for Ge and reached saturation at very low bed volumes (BV) (<10BV). The current work shows that the A-Cat can be used for industrial applications to recover Ge selectively. A Linear Free Energy Relationship (LFER) was used to estimate log KML, followed by aqueous complexation modeling. The modeling showed the Ge(IV) selectivity but underestimated the extent of ion complexations, indicating that the apparent stability constants for grafted ligands are higher than solution log KML.

Biological and equilibrium studies of Co(II), Cu(II), Zn(II), and Cd(II) complexes of 1‐formyl‐3‐semicarbazide: Docking studies

1‐Formyl‐3‐semicarbazide (FSC, HL) and its metal complexes with Co(II), Cu(II), Zn(II), and Cd(II) ions have been synthesized and characterized by elemental analysis, liquid chromatography‐mass spectrometry (LC–MS), infrared (IR), electronic, nuclear magnetic resonance (NMR) and electron spin resonance (ESR) spectroscopy, thermogravimetric analysis (TGA), magnetic susceptibility, and conductivity measurements. The chelates are non‐electrolytic in nature with distorted octahedral geometry. The kinetic and thermodynamic properties were calculated using the Coats–Redfern relation results in positive enthalpy change values and negative entropy change values. The equilibrium studies of FSC with Co(II), Zn(II), and Cd(II) ion have been carried out by potentiometric pH titrations in 70% v/v DMF‐water medium at 303 K and 0.1 M (KNO3) ionic strength. The study revealed that FSC is monobasic acid with pKa value of 8.84. The stability constants suggested the formation of 1:1 Co(II)‐FSC complex, and Zn(II)‐FSC and Cd(II)‐FSC systems revealed the formation of both 1:1 and 1:2 complexes in the solution. DNA binding studies for the metal chelates have been carried out using electronic absorption spectra, fluorescence emission spectra, and viscosity measurements revealing groove binding for Co(II), and Zn(II) complexes, and intercalation mode of binding for Cu(II)‐FSC complex with CT‐DNA. The Kb values from absorption studies are Co(II)‐FSC = 0.9990 × 102, Cu(II)‐FSC = 2.433 × 104, and Zn(II)‐FSC = 8.277 × 102 M−1, and the KSV values from the competitive fluorescence emission studies are Co(II)‐FSC = 0.19212 and Cu(II)‐FSC = 0.11482 M−1. Molecular docking carried out for both ligand and its Co(II) and Zn(II) complexes also revealed groove mode of binding, and Cu(II) complex showed intercalative mode of binding. The inhibition constants for HL, Co(II), Cu(II), and Zn(II) are 1460, 0.478, 0.122, and 0.194 μM, respectively. The antimicrobial activity has been studied using agar disk diffusion method against Escherichia coli and Bacillus subtilis. FSC has been found to be more active against gram +ve and gram –ve bacteria than its metal chelates.

Solubility product and total solubility in water of copper(II) nicotinate

A method for determining the solubility product of sparingly soluble copper (II) salts based on the data of precipitation potentiometric titration with a copper indicator electrode is proposed and substantiated. For the first time, a systematic study of the solubility in aqueous media of copper (II) nicotinate (pyridine-3-carboxylate, CuNic2) has been carried out. The solubility product KSP(CuNic2) was determined from the precipitation titration curves of Cu(NO3)2 solution with sodium nicotinate. The value of log10KSP(CuNic2) = –14.10 ± 0.31 was obtained, and it does not depend on temperature in the range of 14–45 °C. The total solubility of CuNic2 was estimated by atomic absorption spectroscopy; in aqueous solutions with pH 6.3–6.5 containing ∼ 0.07 mol kg−1 NaNic and ∼ 0.04 mol kg−1 NaNO3, it is equal to (1.63 ± 0.12) × 10–5 mol kg−1 at a temperature of 20–25 °C. The cumulative stability constant of the CuNic2(aq) complex was estimated from the values of the solubility product and total solubility: log10β2 = 9.31 ± 0.31 (20–25 °C).

Investigating the Suitability of Various Silver(I) Complexes for Use in a Cyanide-Free Silver Electrolyte

The suitability of various nitrogen, sulfur, oxygen, and phosphorus compounds as complexing agents in a silver electrolyte was examined by using potentiometric titration under practical conditions. The setup consisted of three electrodes to measure the pH and the activity of the silver ions simultaneously. Different ratios of silver to complexing agent from 1:10 to 1:1 at a constant ionic strength of 0.2 mol/L were investigated. The type of the complexes and their corresponding critical stability constants were evaluated by fitting the measured data using a self-developed algorithm. The pH and Nernst potential curve were calculated for the assumed complexes based on the law of mass action to find the best approximation. The correct definition of the occurring species is challenging and can lead to significant changes in the calculation of stability constants. For this reason, the measured silver potential curves were primarily used for the rating of the complexing agents. An evaluation of the measurements shows that the donor atom of the complexing agent and its ligand field strongly affected the stability and type of the complexes. Only a few complexing agents were found to be suitable for use in the cyanide-free silver electrolyte.

Enhanced solubility and oral bioavailability of niclosamide- sulfobutylether-β-cyclodextrin sodium inclusion complexes: An approach to improve its repurposing potential

Niclosamide monohydrate (NCL) displays promising efficacy across diverse medical conditions, but its limited solubility (1.6 µg/mL at 20°C) and oral bioavailability (10%) hinder its translational potential. In this study, we investigate the complexation of NCL with sulfobutylether-β-cyclodextrin sodium (SBECD) as a strategy to enhance its solubility, dissolution rate and oral bioavailability. Molecular docking studies revealed weak binding (∆Gbind < 2.0 kcal/mole) between NCl and SBECD. The nitrophenyl ring inserted into the SBECD cavity, while the phenyl ring, housing Cl and OH groups, prominently extended outside. Phase solubility studies confirmed a 1:1 inclusion complex formation with a stability constant of 186 M−1. Inclusion complexes, prepared via co-grinding, kneading, solvent evaporation, and spray drying, significantly improved NCL dissolution. Specifically, the spray dried and kneaded complexes achieved complete drug release within 60 min, unlike pure NCL exhibiting only 16% dissolution at 90 min. Microscopic analysis showcased reduced particle surface area in the spray dried complex. Oral bioavailability assessments demonstrated an approximately1.6-fold increase for the spray dried and kneaded complexes compared to pure NCL. Our findings support the scalability and efficacy of NCL-SBECD complexation as a strategic approach for enhancing the repurposing potential of NCL in therapeutic applications.