Bone Research Articles

Impact of pharmacist-led interventions in a multidisciplinary consultation meeting for bone and joint infection

IntroductionManagement of bone and joint infections (BJI) requires prolonged and high-dose antibiotic therapy to achieve target concentrations in bone tissue. However, these therapies often lead to adverse effects in patients who are frequently fragile, with multiple comorbidities and associated medications. The decision to treat these complex cases is made during a multidisciplinary team meeting at the reference centre for complex osteoarticular infections (CRIOAC). Material and MethodsElaborated by a pharmacist during CRIOAC meetings, a single-centre before-and-after comparative study of drug-related issues observed during pharmaceutical interventions (PIs), was conducted. For each patient included, a retrospective case was added. PIs were independently evaluated by a committee of infectiologists and pharmacists to assess their criticality. ResultsSixty patients were included in the intervention group, with 59 controls. The population was homogeneous, with a median age of 65 years. Most BJI cases were complex (65.5 %), primarily involving prosthetic joint infections. Staphylococcus species were the predominant pathogens. Antibiotic therapy adapted to antibiograms was orally relayed for 74 % of patients, with 5.9 % requiring re-hospitalization due to adverse effects. Sixty-two PIs were performed, representing an average of 1.8 PIs per meeting or 34.4 % of patients. Dosage adjustment accounted for 42 % of PIs, drug interactions for 46 %, and treatment availability in community pharmacies for 8 %.Regarding criticality, three PIs were classified as vital, 22 as major, 22 as moderate, and 15 as minor in both groups, with the same distribution between the intervention and control groups. ConclusionThis study demonstrates that by collaborating with surgeons and infectiologists, pharmacists participating in CRIOAC meetings can strongly help to prevent drug-related problems in patients with BJIs.

Mechanobiological optimization of scaffolds for bone tissue engineering.

Synthetic bone graft scaffolds aim to generate new bone tissue and alleviate the limitations of autografts and allografts. To meet that aim, it is essential to have a design approach able to generate scaffold architectures that will promote bone formation. Here, we present a topology-varying design optimization method, the "mixed-topology" approach, that generates new designs from a set of starting structures. This approach was used with objective functions focusing on improving the scaffold's local mechanical microenvironments to mechanobiologically promote bone formation within the scaffold and constraints to ensure manufacturability and achieve desired macroscale properties. The results demonstrate that this approach can successfully generate scaffold designs with improved microenvironments, taking into account different combinations of relevant stimuli and constraints.

Rare radiological manifestation of enchondromatosis in children: Columnar pattern: A retrospective cohort study.

The columnar cartilage pattern is characterized by parallel aligned cartilage tissue columns related to the physis without matrix calcification separated by the surrounding osseous tissue. Usually, it is seen in patients with multiple enchondromas. The objective of this study was to elucidate the clinical and radiological features of this rare radiological pattern in the physis, which remains unfamiliar to most physician. We retrospectively evaluated the clinical features and imaging findings of 15 patients (9 men and 6 women) who have a columnar pattern with varied spectrum of enchondromatosis. On X-ray and computed tomography (CT) examination, all these lesions were seen as vertical or oblique oriented tubular zones, which have relatively low radiologic density compared with normal bone. The lesions have similar signal characteristics relative to epiphyseal cartilage plates, on T1W and T2W magnetic resonance images. Columnar pattern was observed in different appearances from one single column in one physis to multiple columns in multiple physis. The mean follow-up was 62 months (range: 36-96 months). The mean age was 9.7 (range: 4-14) years at the initial admission. Eight patients had 3 or less affected physis. Five patients had only one affected physis. We defined these patients' group who had up to 3 affected physis as "limited enchondromatosis with columnar pattern (LE-CP)." We observed that most of the columnar cartilage was turning into the normal bone via endochondral ossification. Based on our observations, the columnar pattern is a rare manifestation of the enchondromas. Columnar pattern, along with the related physis, acts as a normal endochondral ossification process, and surgery is not necessary unless there is a risk of fracture or severe deformity. Further awareness of this unique subset of patients may improve our understanding of the disease and lead to better patient outcomes. We have modified non-hereditarily enchondromatosis into 2 categories: limited enchondromatosis with the columnar pattern and multiple enchondromatosis. We believe that LE-CM reflects a developmental anomaly of the physis rather than a true neoplasia, and it acts as a normal endochondral ossification process. Level IV (case series).

3D Melt-Extrusion Printing of Medium Chain Length Polyhydroxyalkanoates and Their Application as Antibiotic-Free Antibacterial Scaffolds for Bone Regeneration.

In this work, we investigated, for the first time, the possibility of developing scaffolds for bone tissue engineering through three-dimensional (3D) melt-extrusion printing of medium chain length polyhydroxyalkanoate (mcl-PHA) (i.e., poly(3-hydroxyoctanoate-co-hydroxydecanoate-co-hydroxydodecanoate), P(3HO-co-3HD-co-3HDD)). The process parameters were successfully optimized to produce well-defined and reproducible 3D P(3HO-co-3HD-co-3HDD) scaffolds, showing high cell viability (100%) toward both undifferentiated and differentiated MC3T3-E1 cells. To introduce antibacterial features in the developed scaffolds, two strategies were investigated. For the first strategy, P(3HO-co-3HD-co-3HDD) was combined with PHAs containing thioester groups in their side chains (i.e., PHACOS), inherently antibacterial PHAs. The 3D blend scaffolds were able to induce a 70% reduction of Staphylococcus aureus 6538P cells by direct contact testing, confirming their antibacterial properties. Additionally, the scaffolds were able to support the growth of MC3T3-E1 cells, showing the potential for bone regeneration. For the second strategy, composite materials were produced by the combination of P(3HO-co-3HD-co-HDD) with a novel antibacterial hydroxyapatite doped with selenium and strontium ions (Se-Sr-HA). The composite material with 10 wt % Se-Sr-HA as a filler showed high antibacterial activity against both Gram-positive (S. aureus 6538P) and Gram-negative bacteria (Escherichia coli 8739), through a dual mechanism: by direct contact (inducing 80% reduction of both bacterial strains) and through the release of active ions (leading to a 54% bacterial cell count reduction for S. aureus 6538P and 30% for E. coli 8739 after 24 h). Moreover, the composite scaffolds showed high viability of MC3T3-E1 cells through both indirect and direct testing, showing promising results for their application in bone tissue engineering.

Design of gelatin cryogel scaffolds with the ability to release simvastatin for potential bone tissue engineering applications

Tissue engineering aims to improve or restore damaged tissues by using scaffolds, cells and bioactive agents. In tissue engineering, one of the most important concepts is the scaffold because it has a key role in keeping up and promoting the growth of the cells. It is also desirable to be able to load these scaffolds with drugs that induce tissue regeneration/formation. Based on this, in our study, gelatin cryogel scaffolds were developed for potential bone tissue engineering applications and simvastatin loading and release studies were performed. Simvastatin is lipoliphic in nature and this form is called inactive simvastatin (SV). It is modified to be in hydrophilic form and converted to the active form (SVA). For our study's drug loading and release process, simvastatin was used in both inactive and active forms. The blank cryogels and drug-loaded cryogels were prepared at different glutaraldehyde concentrations (1, 2, and 3%). The effect of the crosslinking agent and the amount of drug loaded were discussed with morphological and physicochemical analysis. As the glutaraldehyde concentration increased gradually, the pores size of the cryogels decreased and the swelling ratio decreased. For the release profile of simvastatin in both forms, we can say that it depended on the form (lipophilic and hydrophilic) of the loaded simvastatin.

Assessment of geometrical variability in 3D printed ZrO2: Effects of printing and thermal post-processing

3D printing is developing rapidly and enables the production of parts manufactured using different materials. These includes zirconium dioxide (ZrO2), which can be of particular interest for bone tissue engineering and implantology. However, highly accurate part-dimensions are a must for these applications, which is why this study addresses geometrical deviations which occur during the printing process and thermal post-processing.Six sets of test geometries with 50 individual features were 3D printed with two different ZrO2 slurries (3 mol% yttria-stabilized ZrO2) and scanned with a profilometer. After debinding and sintering, the profilometer scan was repeated and the deviations and shrinkage factors were determined.A notable difference is observed when the same ceramic is processed using two different slurries. For instance, one used ceramic slurry, LithaCon 210, exhibits shrinkage factors of shrXY=21.2±3.4%(n=78) and shrZ=23.6±0.54%(n=24) for protruding structures, while the other ceramic slurry, LithaCon 280, shows shrinkage factors of shrXY=21.7±3.3%(n=78) and shrZ=24.5±0.55%(n=24).Geometric deviations differed for intruding (like holes and slots) and protruding (like pillars) geometries, being more pronounced in case of intruding geometries, especially where printing overhangs occur.Although the shrinkage during sintering needs further investigation, these experimental findings are a good starting point to validate and refine simulation models for shrinkage and improve production processes of 3D printed ceramics.

In-situ electret scaffolds with controllable electric fields printed by MEW for bone tissue regeneration

Physiologically relevant electrical microenvironments play an integral role in manipulating bone metabolism. Although implanted biomaterials using conductive or piezoelectric materials to mimic natural tissue electrical properties have been introduced into the field of bone regeneration, the use of electret materials to provide stable and durable electrical stimulation has rarely been studied in biomaterial design. In this study, the ZnO/PCL composite scaffolds with in-situ electret were fabricated using melt electro-writing to explore its efficacy in bone regeneration. By adjusting the electret concentration, the surface potential of the composite scaffolds could be tuned to the biopotential for promoting bone regeneration, and the prepared scaffolds exhibited good electrical stability over an observation period of up to 42 days. In vitro biological experiments showed that the in-situ electret scaffolds promoted the cell viability and osteogenic differentiation of mesenchymal stem cells. At the same time, the in-situ electret composite scaffolds can induce the phenotype transformation of RAW 264.7 cells from M1 to M2, creating a favorable microenvironment for bone tissue regeneration. The composite scaffolds significantly promoted bone regeneration in vivo through sustained endogenous electrical stimulation. These findings suggest that the in-situ electret scaffolds that maintain a stable and physiological electrical microenvironment are promising candidates for enhanced bone regeneration.

Tuning Mg Doping and Features of Bone-like Apatite Nanoparticles Obtained via Hydrothermal Synthesis.

Nanocrystalline apatites have been intensively studied for decades, not only for their well-known mimesis of bone apatite but also for applicative purposes, whether as biomaterials for skeletal repair or more recently for a variety of nanomedical applications enabled by their peculiar surface characteristics. Particularly, ion-doped apatites are of great interest because the incorporation of foreign ions in the composition of apatite (nano)crystals alters the bulk and surface properties, modifying their ability to interact with the external environment. This is clearly seen in the physiology of bone tissue, whose mineral phase, a low crystallinity apatitic phase, can dynamically exchange ions with cells, thus driving bone metabolism. Taking bone mineral as a model, the present work describes the development of Mg-doped hydroxyapatite nanoparticles, exploiting hydrothermal synthesis to achieve extents of Mg2+ doping hardly achieved before and using citrate to develop stable apatite colloidal dispersions. Morphological and physicochemical analyses, associated with in-depth investigation of ions populating the apatitic lattice and the nonapatitic surface layer, concurred to demonstrate the cooperative presence of Mg2+ and citrate ions, affecting the dynamic ion retention/release mechanisms. Achieving high Mg2+ doping rates and understanding how Mg doping translates into surface activation of apatite-based nanoparticles is expected to foster the design of novel smart and tunable devices, to adsorb and release ionic species and cargo molecules, with potential innovations in the biomedical field or even beyond, as in catalysis or for environmental remediation.

Enhancing orthopedic outcomes: A comparative analysis of gentamicin sulphate and nanosilver in bone cement

BackgroundOrthopedic surgeries frequently utilize bone cement, which can increase the risk of postoperative infections. Addressing this challenge, this study aims to enhance the mechanical, physical, and handling properties of bone cement by integrating gentamicin sulfate (GS) and nanosilver (nAg). The objective is to evaluate and compare the effects of these additives on properties such as compressive strength, flexural strength, doughing time, working time, setting time, and exothermic temperature. By doing so, the study seeks to identify a safer and more effective alternative to traditional antibiotics in bone cement formulations, thereby improving clinical outcomes in orthopedic procedures. MethodsThis research involved a comparative analysis of modified cements against standard cements, focusing on compressive strength, flexural strength, doughing time, working time, setting time, and exothermic temperature. Various bone cement samples with GS and nAg additives were prepared and tested in accordance with international standards (ISO 5833:2002 and ASTM F451). Statistical analysis, including one-way and two-way ANOVA tests, was used to assess the significance of the results. ResultsnAg-loaded cements exhibit mechanical and physical properties on par with or supe-rior to those of GS-loaded and standard cements. Notably, nAg incorporation leads to significantly lower exothermic temperatures, reducing the risk of thermal bone tissue damage. This finding highlights that nAg-loaded cement is a safer alternative. Alongside unaltered or enhanced strength, nAgs demonstrate promise for orthopedic applications, particularly in primary arthroplasty. Additionally, nAgs reduce doughing time, enhancing the practicality of these methods in surgical settings. ConclusionsIn conclusion, this study underscores the potential advantages of incorporating GSs and nAgs into bone cement. nAg-loaded cement offers improved properties and reduced infection risk, making it a valuable choice for orthopedic procedures. It enhances both mechanical performance and safety, addressing crucial concerns in orthopedic surgery.

Qianggu Decoction Alleviated Osteoporosis by Promoting Osteogenesis of BMSCs through Mettl3-Mediated m6A Methylation.

Osteoporosis development is linked to abnormal bone marrow mesenchymal stem cells (BMSCs) differentiation. N6-methyladenosine (m6A), a prevalent mRNA modification, is known to influence BMSCs' osteogenic capacity. Qianggu decoction (QGD), a traditional Chinese medicine for osteoporosis, has unknown effects on BMSCs differentiation. This study investigates QGD's impact on BMSCs and its potential to ameliorate osteoporosis through m6A regulation. Using Sprague-Dawley (SD) rats with ovariectomy-induced osteoporosis, it is evaluated QGD's antiosteoporotic effects through micro-CT, histology, Western blotting, and osteoblastogenesis markers. QGD is found to enhance bone tissue growth and upregulate osteogenic markers Runx2, OPN, and OCN. It also promoted BMSCs osteogenic differentiation, as shown by increased calcium nodules and ALP activity. QGD treatment significantly increased m6A RNA levels and Mettl3 expression in BMSCs. Silencing Mettl3 with siRNA negated QGD's osteogenic effects. Collectively, QGD may improve BMSCs differentiation and mitigate osteoporosis, potentially through Mettl3-mediated m6A modification.

LL-37 and bisphosphonate co-delivery 3D-scaffold with antimicrobial and antiresorptive activities for bone regeneration

This study introduces a novel 3D scaffold for bone regeneration, composed of silk fibroin, chitosan, nano-hydroxyapatite, LL-37 antimicrobial peptide, and pamidronate. The scaffold addresses a critical need in bone tissue engineering by simultaneously combating bone infections and promoting bone growth. LL-37 was incorporated for its broad-spectrum antimicrobial properties, while pamidronate was included to inhibit bone resorption. The scaffold's porous structure, essential for cell infiltration and nutrient diffusion, was achieved through a freeze-drying process. In vitro assessments using SEM and FTIR confirmed the scaffold's morphology and chemical integrity. Antimicrobial efficacy was tested against pathogens of Staphylococcus aureus (S. aureus) and Pseudomonas aeruginosa (P. aeruginosa). In vivo studies in a murine model of infectious bone defect revealed the scaffold's effectiveness in reducing inflammation and bacterial load, and promoting bone regeneration. RNA sequencing of treated specimens provided insights into the molecular mechanisms underlying these observations, revealing significant gene expression changes related to bone healing and immune response modulation. The results indicate that the scaffold effectively inhibits bacterial growth and supports bone cell functions, making it a promising candidate for treating infectious bone defects. Future studies should focus on optimizing the release of therapeutic agents and evaluating the scaffold's clinical potential.

Decellularized Antler Cancellous Bone Matrix Material Can Serve as Potential Bone Tissue Scaffold

Decellularized Antler Cancellous Bone Matrix Material Can Serve as Potential Bone Tissue Scaffold

Successful completion of orthodontic therapy in a patient with osteopetrosis: Case Report.

Orthodontic therapy in patients with osteopetrosis (OP) of the jaws has typically been contraindicated owing to the presence of poorly perfused and extremely compact bone, and the potential risk for infection and osteomyelitis. As such, completed orthodontic cases in association with OP have rarely been published. A patient aged 14 years 6 months, with no known diagnosis of OP, sought orthodontic assessment for anterior crowding. The patient exhibited a straight facial profile and increased mandibular facial height, competent lips, shallow mentolabial sulcus with mild mentalis strain, flat/reverse smile arc and wide buccal corridors on smiling. The patient had a Class I incisor relationship on Class I skeletal bases with bilateral Class I molars and Class II canine relationships. This was complicated by a crossbite involving the lateral incisors and a Bolton discrepancy due to small maxillary lateral incisors. A radiologic assessment revealed polyostotic OP of the oromaxillofacial complex. Treatment consisted of maxillary and mandibular fixed orthodontic therapy, bite turbos and elastics to level and align the dentition. Extractions of permanent teeth were not needed. At the conclusion of treatment, there was a slight left Class II malocclusion, with incomplete intercuspation on the left side due to tooth size discrepancy, possibly attributed to inadequate elastics compliance and the presence of osteopetrotic bone. The treatment was completed in 3 years, 1 year longer than anticipated. This report represents the second published account of a patient with OP successfully managed with comprehensive orthodontic care and without osseous complications. Obtaining cephalometric measurements on OP-affected patients may be imprecise owing to the presence of extremely dense bone and difficulty to identify bony landmarks. To reduce osteopetrotic sequelae, attending clinicians should consider reduced exertional orthodontic forces and closely monitor patients for adverse alveolar events.

Magnetic Substrates for Tissue Engineering—A Review

Tissue engineering is based on combining cells with suitable scaffolds and growth factors. Recently, bone tissue engineering has been especially investigated deeply due to a large number of bone-related diseases. One approach to improve scaffolds is based on using piezoelectric materials as a way to influence the growing bone tissue by mechanical stress. Another method to stimulate tissue growth is by applying an external magnetic field to composites of magnetostrictive and piezoelectric materials, as well as the possibility to prepare oriented surfaces by orienting embedded magnetic fibers or nanoparticles. In addition, magnetic scaffolds without other special properties have also been reported to show improved properties for bone tissue and other tissue engineering. Here, we provide an overview of recent research on magnetic scaffolds for tissue engineering, differentiating between bone and other tissue engineering. We show the advantages of magnetic scaffolds, especially related to cell guidance and differentiation, and report recent progress in the production and application of such magnetic substrates for different areas of tissue engineering.

Additive manufacturing of bioactive and biodegradable poly (lactic acid)-tricalcium phosphate scaffolds modified with zinc oxide for guided bone tissue repair

Bioactive and biodegradable scaffolds that mimic the natural extracellular matrix of bone serve as temporary structures to guide new bone tissue growth. In this study, 3D-printed scaffolds composed of poly (lactic acid) (PLA)-tricalcium phosphate (TCP) (90-10 wt.%) were modified with 1%, 5%, and 10 wt.% of ZnO to enhance bone tissue regeneration. A commercial chain extender named Joncryl was incorporated alongside ZnO to ensure the printability of the composites. Filaments were manufactured using a twin-screw extruder and subsequently used to print 3D scaffolds via fused filament fabrication (FFF). The scaffolds exhibited a homogeneous distribution of ZnO and TCP particles, a reproducible structure with 300 μm pores, and mechanical properties suitable for bone tissue engineering, with an elastic modulus around 100 MPa. The addition of ZnO resulted in enhanced surface roughness on the scaffolds, particularly for ZnO microparticles, achieving values up to 241 nm. This rougher topography was responsible for enhancing protein adsorption on the scaffolds, with an increase of up to 85% compared to the PLA-TCP matrix. Biological analyses demonstrated that the presence of ZnO promotes mesenchymal stem cell (MSC) proliferation and differentiation into osteoblasts. Alkaline phosphatase (ALP) activity, an important indicator of early osteogenic differentiation, increased up to 29%. The PLA-TCP composite containing 5% ZnO microparticles exhibited an optimized degradation rate and enhanced bioactivity, indicating its promising potential for bone repair applications.

Mechanical and in vitro study of 3D printed silk fibroin and bone-based composites biomaterials for bone implant application.

When treating orthopaedic damage or illness and accidental fracture, bone grafting remains the gold standard of treatment. In cases where this approach doesn't seem achievable, bone tissue engineering can offer scaffolding as a substitute. Defective and fractured bone tissue is extracted and substituted with porous scaffold structures to aid in the process of tissue regeneration. 3D bioprinting has demonstrated enormous promise in recent years for producing scaffold structures with the necessary capabilities. In order to create composite biomaterial inks for 3D bioprinting, three different materials were combined such as silk fibroin, bone particles, and synthetic biopolymer poly (ε-caprolactone) (PCL). These biomaterials were used to fabricate the two composites scaffolds such as: silk fibroin + bovine bone (SFB) and silk fibroin + bovine bone + Polycaprolactone (SFBP). The biomechanical, structural, and biological elements of the manufactured composite scaffolds were characterized in order to determine their suitability as a possible biomaterial for the production of bone tissue. The in vitro bioactivity of the two composite scaffolds was assessed in the simulated body fluids, and the swelling and degradation characteristics of the two developed scaffolds were analyzed separately over time. The results showed that the mechanical durability of the composite scaffolds was enhanced by the bovine bone particles, up to a specific concentration in the silk fibroin matrix. Furthermore, the incorporation of bone particles improved the bioactive composite scaffolds' capacity to generate hydroxyapatite in vitro. The combined findings show that the two 3D printed bio-composites scaffolds have the required mechanical strength and may be applied to regeneration of bone tissue and restoration, since they resemble the characteristics of native bone.

Minimally Invasive Extraction System Benex—Clinical Evaluation and Comparison

Tooth extraction is one of the oldest and most well-known surgical procedures in dental medicine. It is still routinely performed by general practitioners and dental undergraduates. The Benex extraction system allows for the extraction of teeth in a vertical direction, which avoids most trauma against surrounding alveolar bone and soft tissues. The study included 56 patients who were recruited from the Department of Oral Surgery, Medical University—Plovdiv. The patients were split into two groups of 28 patients—Group I (control group) and Group II (study group). For each group, the success of the extraction, buccal cortical plate preservation, pain experience and early wound healing were assessed. There was no statistical significance between the success of the extractions in both groups. The Benex extractions preserved the buccal cortical plate in 95% of the cases, whereas the forceps extractions preserved it in only 71.8%, which is statistically significant. On the seventh day, patients in Group II reported less pain, without a significant difference. There was a significantly bigger number of completely healed extraction wounds on the 10th day. Atraumatic extractions allow for more hard and soft tissues to be preserved in the extraction site. This is essential for a successful outcome and the aesthetically pleasing results of the following dental restoration.

EVALUATION OF THE EFFECTIVENESS OF HIGH-INTENSITY MICROFOCUSED ULTRASOUND AS A NON-INVASIVE METHOD FOR REDUCING FAT LOCATED IN THE ABDOMINAL REGION: PILOT STUDY

The search for non-invasive techniques to reduce localized fat in the abdominal region has become increasingly popular in contemporary societies. Among these techniques is High Intensity Microfocused Ultrasound (HIFU), which, by delivering high intensities of energy in a focused manner, promotes the rupture of adipocyte membranes, destroying them. This study aims to evaluate the effectiveness of HIFU as a non-invasive intervention for reducing localized fat in the abdominal region. The research was based on an experimental, qualitative and quantitative pilot study with 7 volunteers who had localized adiposity, who underwent a HIFU session. The analysis took place using dermal ultrasound scans of the thickness of subcutaneous fat, carried out before the treatment, immediately after the session and also during a 4-week follow-up period. In order to assess the accuracy and consistency of the dermal ultrasound measurements, the mean and standard deviation of each set of data were calculated. The ultrasound analyses confirmed the reduction in adipose tissue, providing an objective assessment of the results. HIFU proved to be a promising non-invasive approach for reducing abdominal adipose tissue, regardless of whether it is malleable or more compact adipose tissue.

Vascularization and Innervation for Bone Tissue Engineering

Vascularization and Innervation for Bone Tissue Engineering

ATR-FTIR spectroscopy imaging of bone repair in mandibular laser-osteotomy.

The aim of this study was to verify the effectiveness of attenuated total reflectance-fourier transform infrared (ATR-FTIR) spectroscopy in the characterization of bone repair in mandibular osteotomy using erbium, chromium-doped yttrium, scandium, gallium and garnet (Er,Cr:YSGG) laser and multilaminate drill on each side. Two mandible bone fragments were removed from 30 rabbits, and the process of bone repair was studied immediately, 3, 7, 15, 21, and 28 days after the surgery. The histological analysis allowed detecting differences in the early stages of tissue repair after bone cutting performed with the Er,Cr:YSGG laser or multilaminate drill. The ATR-FTIR spectroscopy technique was sensitive to changes in the organic content of bone tissue repair process.