Spectroscopic Techniques Research Articles

Supreme capture of Europium(ΙΙΙ) by silica-hyperbranched poly(ethylene imine) composites from aqueous solutions − A mechanistic study

Two bio-inspired variations of the sol–gel technique produced silica-hyperbranched poly (ethylene imine) (PEI) composite nanoparticles (NP) and xerogels (XG). Both methods are performed in ambient conditions and do not require toxic organic solvents or high temperatures. We have investigated the removal efficiency of trivalent europium by these two hybrid species in near-neutral aqueous solutions. The adsorption kinetics and isotherms, including data fitting with the pseudo-first and second order kinetic, and the Langmuir isotherm model are presented and discussed. Thermodynamic parameters indicate exothermic reaction (–180 kJ/mol for NP and –192 kJ/mol for XG, respectively) In addition, spectroscopic (Fourier Transform Infra-Red FTIR, Fluorescence Spectroscopy FS, X-ray Photoelectron Spectroscopy XPS) and microscopic techniques (Scanning Electron Microscopy SEM coupled with Energy Dispersive X-ray analysis EDX), as well as ζ-potential and Dynamic light scattering (DLS) measurements, have been employed to evaluate the interaction mechanism between the surface active moieties and Eu(III). The extremely high and homogeneous dispersion of the amino and silicate groups of the composites has led to the highest capacity value (22 mmol/g or 3343 mg/g and 14 mol/g or 2128 mg/g for the two distinct forms of the nanoparticles and the xerogels, respectively) reported up to today implying a potential application for lanthanide recovery. The adsorption data along with the spectroscopic and microscopic indicate that the adsorption is well described by the Langmuir isotherm model and is based on the formation of inner- and outer-sphere complexes between Eu(III) the amine and −Si-O− moieties.

Biodegradable and biocompatible nonisocyanate polyurethanes synthesized from bio-derived precursors

Despite the enormous use of polyurethanes (PUs) in multiple aspects of modern lifestyle, the industrial scale manufacturing of PUs uses toxic chemicals like isocyanates, phosgene till today. In addition, the non-biodegradability and non-biocompatibility of PUs and their debris are serious cause of concerns for the environment. To deal with these challenges, in the current work, a new approach is reported in which bio-derived non-isocyanate polyurethanes were synthesized by exploiting viable amino acid-based diamines and biscyclocarbonates from sebacoyl chloride and diglycerol derivatives in a readily doable process. The newly designed polyhydroxyurethanes (PHUs) exhibited remarkable biodegradability and biocompatibility (cell viability) in comparison with commercial diamine based PHUs. A series of PHUs were synthesized in bulk and solvent free green synthetic route by polycondensing library of amino acids (such as glycine, alanine, valine, and isoleucine etc.) based diamines consisting of varying alkyl chain lengths and biscyclocarbonates like sebacic biscyclocarbonate and diglycerol biscyclocarbonate etc. All the synthesized PHUs were thoroughly characterised by IR, NMR and HRMS spectroscopic techniques. The impact of chain length and molecular structure of the synthesized PHUs were also evaluated using DSC, TGA, SEC, water contact angle measurements and hydrolytic degradation studies. The molar masses of the PHUs obtained from the SEC analysis are in the range of ∼17,000–24,000 Da. The current study demonstrated that amino acids is one of the major degradation products and are biocompatible in in-vitro conditions. The PHUs and their degradable products showed excellent cell viability when studied in HEK293T cells that were carried out using microgram to milligram concentration of PHUs. The outcome of this work in comparison to conventional PHUs and polyurethanes clearly demonstrated good biocompatibility and hence drawing attention to potential applications in bio-adhesives, bio-implants, drug delivery, and green coatings etc. in the near future.

Design, Characterization, and DFT exploration of new mononuclear Fe(III) and Co(II) complexes based on Isatin-hydrazone derivative: Anti-inflammatory profiling and molecular docking insights

This research focuses on the synthesis and detailed analysis of novel compounds encompassing Fe(III) (C1) and Co(II) (C2) ions, featuring 4-(2-oxo-1,2-dihydro-3H-indol-3-ylidene)hydrazono]methylphenyl 4-methylbenzenesulfonate ligand. The structural elucidation of these freshly prepared compounds was meticulously pursued employing a battery of spectroscopic techniques including NMR, UV–vis, IR, mass spectroscopy, magnetic susceptibility, conductivity, and thermal analysis (TG, DTA). Furthermore, the determination of complex stoichiometry and identification of their octahedral structural configuration were facilitated through the application of Job's techniques and molar ratio analysis. Complementing the experimental analyses, computational investigations via Density Functional Theory (DFT) were conducted to garner deeper insights into the structural, orbital, and electronic attributes of the compounds. Moreover, the anti-inflammatory properties of these synthetic compounds were scrutinized through in vitro assays, notably highlighting the superior efficacy of the C1 complex among the examined compounds. To validate their therapeutic potential, a comparative assessment was made against established anti-inflammatory agents. The hierarchy of anti-inflammatory activity among the metal complexes is established as follows: C1 > C2 > L, with the C1 exhibiting the highest potency. Additionally, a molecular docking study was executed to elucidate the compounds' interaction with the cyclooxygenase-2 (COX-2) enzyme (PDB ID: 5IKT), further corroborating their potential pharmacological relevance.

Mechanistic Insights into Curvature Formation in Synthetic Vesicles.

The mimicking of natural lipid bilayers with synthetic amphiphilic systems is of great interest to researchers, as insights could lead to better understanding of the complexities of cell membranes, as well as new materials and healthcare technologies. Recapitulating natural lipid asymmetry across bilayer membranes has important implications for curvature in cell, vesicle, and organelle morphologies, but has been challenging to achieve with synthetic lipid combinations or standard amphiphilic block copolymers. In a recent article, Elizebath et al. report the synthesis of a new type of synthetic amphiphile able to dynamically induce asymmetry in an artificially bilayer membrane. The molecules were designed around an extended π-conjugated hydrophobic core with tertiary amine terminated oxyalkylene side chains. Protonation of the tertiary amines on the bilayer exterior leads to curvature induction, bilayer fission, and vesicle formation as monitored by time resolved spectroscopy techniques and microscopy. The results were further validated with density functional theory (DFT) calculations. The delicate balance between different molecular scale interactions in the supramolecular structures led to the dynamic transformation of the bilayer membranes. Insights described could be used to advance the assembly of hierarchical life-like materials.

Confinement of excited states in two-dimensional, in-plane, quantum heterostructures

Two-dimensional (2D) semiconductors are promising candidates for optoelectronic application and quantum information processes due to their inherent out-of-plane 2D confinement. In addition, they offer the possibility of achieving low-dimensional in-plane exciton confinement, similar to zero-dimensional quantum dots, with intriguing optical and electronic properties via strain or composition engineering. However, realizing such laterally confined 2D monolayers and systematically controlling size-dependent optical properties remain significant challenges. Here, we report the observation of lateral confinement of excitons in epitaxially grown in-plane MoSe2 quantum dots (~15-60 nm wide) inside a continuous matrix of WSe2 monolayer film via a sequential epitaxial growth process. Various optical spectroscopy techniques reveal the size-dependent exciton confinement in the MoSe2 monolayer quantum dots with exciton blue shift (12-40 meV) at a low temperature as compared to continuous monolayer MoSe2. Finally, single-photon emission (g2(0) ~ 0.4) was also observed from the smallest dots at 1.6 K. Our study opens the door to compositionally engineered, tunable, in-plane quantum light sources in 2D semiconductors.

A novel non-aqueous tertiary amine system for low energy CO2 capture developed via molecular dynamics simulation

The current technology for capturing CO2 using alkanolamine aqueous solutions is known for its high energy and capital costs. As a result, developing new absorbents for low-energy CO2 removal remains a challenge. An additional activator can promote CO2 absorption performance. However, it is based on experimental screening. In this study, based on molecular dynamic simulation, we have successfully developed a novel and energy-efficient CO2 absorbent by combining N, N-Dimethylethanolamine (DMEA), and ethylene glycol (EG), with different activators, including ethanolamine (MEA), ethylenediamine (EDA), and piperazine (PZ). The addition of these activators significantly enhances the CO2 absorption performance of DMEA-based absorbents. Among them, DMEA-PZ-EG exhibits the maximum CO2 absorption rate and capacity, achieving 6.35 (g-CO2/(kg-soln.·min.)) and 96.5 (g-CO2/kg-soln.), respectively, representing a 230.1 % and 206.35 % improvement over 2M DMEA-EG absorbent. Moreover, compared to a 30 wt% MEA solution, the energy consumption of DMEA-based absorbents is reduced by 33.93–51.56 %. The reaction products were characterized using various spectroscopic techniques, including Attenuated Total Reflectance Fourier Transform Infrared spectroscopy (ATR-FTIR), and 1D and 2D Nuclear Magnetic Resonance spectroscopy (1H and 13C NMR). The NMR results confirmed that DMEA becomes protonated after CO2 absorption in the DMEA-EG mixture. The deprotonation of EG promote its reaction with CO2, resulting in the forming of EG carbonates. This assumption has been confirmed by the IR spectrum. Furthermore, the effect of activators on CO2 absorption has been analysed at the molecular level through molecular dynamics simulation and a new method is proposed to predict the CO2 absorption performance of non-aqueous solvents. Using non-aqueous DMEA absorbents presents a promising approach for improving CO2 capture efficiency, reducing energy consumption, and facilitating regeneration.

Characterization and detailed mapping of C by spectral sensor for soils of the Western Plateau of São Paulo

Soil mineralogy and texture are directly related to soil carbon due to the physical properties of the clay surface. Traditional techniques for quantifying carbon in soil are time-consuming and expensive, making large-scale quantification for mapping unfeasible. The alternative is the use of soil sensors, such as diffuse reflectance spectroscopy (DRS), an economical, fast, and accurate technique for predicting carbon stocks. In this sense, this study aimed to (a) investigate the relationship of C with different soil mineralogical, chemical, and physical attributes for different geological and geomorphological compartments; (b) understand which spectral bands are most important for estimating C content; (c) estimate C content from diffuse reflectance spectroscopy using different mathematical techniques and indicate which one is the best for tropical soil conditions; and (d) map C contents in detail. The study area was the Western Plateau of São Paulo (WPSP), which covers approximately 13 million hectares (~ 48% of the State of São Paulo, Brazil). A total of 265 samples were collected in this area. The attributes clay, silt, sand, crystalline and non-crystalline iron, base saturation, soil density, total pore volume, total C, C stock, kaolinite/(kaolinite + gibbsite) and hematite/(hematite + goethite), hematite and goethite contents, and spectral curves were evaluated. The spectra were recorded at 0.5-nm intervals, with an integration time of 2.43 nm s−1 over the 350 to 2500-nm range (350–800 nm—visible—VIS and 801–2500 nm—near-infrared—NIR). The data were subjected to descriptive statistics, Spearman correlation, stepwise analysis, and cluster grouping for characterization purposes; partial least squares regression (PLSR) and random forest (RF) for estimation purposes; and geostatistics analysis for creation of spatial maps. Our results indicate that the highest C contents are associated with more clayey soils, oxidic mineralogy, higher total pore volume, and lower soil density in highly dissected basalt compartments. The random forest algorithm associated with the Vis–NIR spectral range is more efficient for estimating and mapping C contents. This suggests that integrating diffuse reflectance spectroscopy with machine learning techniques holds promise for shaping public policies related to land use, mitigating CO2 emissions, and facilitating the implementation of carbon credit policies in a rapid and economically efficient manner.

Metal-Organic Framework on Fullerene (MOFOF) as a Hierarchical Composite by the Integration of Coordination Chemistry and Supramolecular Chemistry.

There is a synergy between coordination chemistry and supramolecular chemistry that has led to the development of innovative hierarchical composites with diverse functionalities. Here, we present a novel approach for the synthesis and characterization of a metal-organic framework on fullerene (MOFOF) composites, achieved through the integration of coordination chemistry and supramolecular chemistry principles. The hierarchical nature of the MOFOF harnesses the inherent properties of metal-organic frameworks and fullerenes. The two-step synthesis procedure involves controlled assembly of fullerenes as tube-like nanostructures (fullerene nanotube: FNT), their surface functionalization, and the on-surface growth of the MOF (in this case, ZIF-67). The method permits the precise tuning of morphology, effective distribution of MOF-on-FNT, and tight compositional control. The materials were comprehensively structurally characterized using electron microscopy, spectroscopic techniques, and other methods to elucidate the unique features and interactions within the MOFOF composites. The main findings reveal that the novel synthesis and characterization of MOFOF composites demonstrate the successful integration of coordination chemistry and supramolecular chemistry for the designing and fabricating of advanced hierarchical composites with tailored properties, including micro- and mesopore channels, interfacial facets, and defect sites. These properties are expected to lead to numerous potential applications such as gas storage and separation, catalysis, sensing, energy storage, and environmental remediation. However, only the capability of acid vapor sensing was tested and is described here.

A case study using spectroscopy and computational modelling for Co speciation in a deep eutectic solvent.

Cobalt has a vital role in the manufacturing of reliable and sustainable clean energy technologies. However, the forecasted supply deficit for cobalt is likely to reach values of 150 kT by 2030. Therefore, it is paramount to consider end-of-life devices as secondary resources for cobalt. Electrorecovery of cobalt from leached solutions has attracted attention due to the sustainability of the recovery process over solvent extraction followed by chemical precipitation. Recently, we reported Co electrorecovery from two different cobalt sources (CoCl2·6H2O and CoSO4·7H2O) using ethylene glycol : choline chloride (EG : ChCl) in a 4.5 : 1 molar ratio, leading to higher purity and easier electrodeposition when sulfate was present as an additive. Here, Co2+ speciation is reported for the two EG : ChCl systems depending on the cobalt source using several spectroscopic techniques (e.g. NMR, EPR, FTIR) in combination with molecular dynamics simulations. Monodentate coordination of SO42- to Co2+, forming the tetrahedral [CoCl3(SO4)]3- was observed as the dominant structure in the system containing CoSO4·7H2O, whereas the system comprising CoCl2·6H2O shows a homoleptic tetrahedral [CoCl4]2- as the dominant structure. This resulted in knowledge being gained regarding Co2+ speciation and the correlation with electrochemistry will contribute to the science required for designing safe electrolytes for efficient electrorecovery.

Synthesis, Biological Evaluation, Molecular Docking, MD Simulation and DFT Analysis of New 3-Hydroxypyridine-4-one Derivatives as Anti-tyrosinase and Antioxidant Agents

In the present study, ten new substituted 3-hydroxypyridine-4-one derivatives were synthesized in a four-step method, and their chemical structures were confirmed using various spectroscopic techniques. Subsequently, the inhibitory activities of these derivatives against tyrosinase enzyme and their antioxidant activities were evaluated. Amongest the synthesized compounds, 6b bearing a 4-OH-3-OCH3 substitution was found to be a promising tyrosinase inhibitor with an IC50 value of 25.82 μM, which is comparable to the activity of kojic acid as control drug. Kinetic study indicated that compound 6b is a competitive inhibitor of tyrosinase enzyme, which was confirmed by molecular docking results. The molecular docking study and MD simulation showed that compound 6b was properly placed within the tyrosinase binding pocket and interacted with key residues, which is consistent with its biological activity. The DFT analysis demonstrated that compound 6b is kinetically more stable than the other compounds. In addition, compounds 6a and 6b exhibited the best antioxidant activities. The findings indicate that compound 6b could be a promising lead for further studies.

Bio fabricated palladium nano particles using phytochemicals from aqueous cranberry fruit extract for anti-bacterial, cytotoxic activities and photocatalytic degradation of anionic dyes.

The low cost and ecological compatibility of green technology makes it superior to chemical approaches in the generation of metal nanoparticles. The current study shows the use of cranberry fruit extract in the environmentally friendly green production of palladium nanoparticles. It is well known that the fruit extract from cranberries has a rich phytochemical composition that makes it a useful bio reducing agent for the formation of PdNPs. Several spectroscopic techniques, including ultraviolet-visible spectroscopy (UV-vis), X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), and energy-dispersive X-ray spectroscopy (EDX), were used to characterize the palladium nanoparticles (PdNPs). The diffractogram of the XRD analysis shows significant reflections at 39.98° (111), 46.49° (200), and 67.95° (220), which indicate the face-centered cubic (FCC) structure of PdNPs and demonstrate the crystallinity of the produced nanoparticles from the green method. The SEM and TEM structural and morphological analyses reveal that the synthesized nanoparticles have a spherical shape with size ranging between 2 nm to 50 nm. In addition, the synthesized PdNPs demonstrated possible antibacterial activity on both Gram-positive and Gram-negative bacteria as well as a cytotoxic effect on the MCF-7 breast cancer cell line. The degradation of Indigo Carmine (IC) and Sunset Yellow (SY) dyes can be effectively catalyzed by biogenic PdNPs, according to the results.

Temporal Variations in Fire Impacts on Characteristics and Composition of Soil-Derived Dissolved Organic Matter at Qipan Mountain, China.

Dissolved organic matter (DOM), the most reactive fraction of forest soil organic matter, is increasingly impacted by wildfires worldwide. However, few studies have quantified the temporal changes in soil DOM quantity and quality after fire. Here, soil samples were collected after the Qipan Mountain Fire (3-36 months) from pairs of burned and unburned sites. DOM contents and characteristics were analyzed using carbon quantification and various spectroscopic and spectrometric techniques. Compared with the unburned sites, burned sites showed higher contents of bulk DOM and most DOM components 3 months after the fire but lower contents of them 6-36 months after the fire. During the sharp drop of DOM from 3 to 6 months after the fire, carboxyl-rich alicyclic molecule-like and highly unsaturated compounds had greater losses than condensed aromatics. Notably, the burned sites had consistently higher abundances of oxygen-poor dissolved black nitrogen and fluorescent DOM 3-36 months after the fire, particularly the abundance of pyrogenic C2 (excitation/emission maxima of <250/∼400 nm) that increased by 150% before gradually declining. This study advances the understanding of temporal variations in the effects of fire on different soil DOM components, which is crucial for future postfire environmental management.

The Effect of Reactive Oxygen Species on Respiratory Complex I Activity in Liposomes.

Respiratory complex I (R-CI) is an essential enzyme in the mitochondrial electron transport chain but also a major source of reactive oxygen species (ROS), which are implicated in neurodegenerative diseases and ageing. While the mechanism of ROS production by R-CI is well-established, the feedback of ROS on R-CI activity is poorly understood. Here, we perform EPR spectroscopy on R-CI incorporated in artificial membrane vesicles to reveal that ROS (particularly hydroxyl radicals) reduce R-CI activity by making the membrane more polar and by increasing its hydrogen bonding capability. Moreover, the mechanism that we have uncovered reveals that the feedback of ROS on R-CI activity via the membrane is transient and not permanent; lipid peroxidation is negligible for the levels of ROS generated under these conditions. Our successful use of modular proteoliposome systems in conjunction with EPR spectroscopy and other biophysical techniques is a powerful approach for investigating ROS effects on other membrane proteins.

Multidimensional fluorescence spectroscopy of wine using synchronous excitation/emission matrices and time-resolved fluorescence interferometric detection

Wines are complex mixtures of chemical compounds with broad and overlapping absorption and emission spectral features in the UV and visible spectral regions, making them challenging to study with conventional optical spectroscopic techniques. Multidimensional fluorescence spectroscopies correlate fluorescence spectra with other degrees of freedom, and have proven useful for studying complex molecular systems, offering a pathway for the analysis of wines utilising their inherent fluorescence. Here we employ steady-state excitation-emission matrix (EEM) and time-resolved fluorescence spectral measurements to investigate representative commercial white and red wine samples and a fluorescent ‘model’ wine base. Combining these multidimensional measurement methods provides information on the emission characteristics of the components that wines contain. This investigation illustrates the potential for multidimensional fluorescence techniques as diagnostic tools for the wine industry.

A fluorite bead from Bronze Age Tianshanbeilu cemetery, Xinjiang, Northwest China

The Tianshanbeilu cemetery is the largest Bronze Age cemetery in eastern Xinjiang, China, and plays important roles in connecting the Eurasian interior to the Hexi Corridor, and further to the Central Plains region. Utilizing micro-XRF and Raman spectroscopy techniques, we identified a fluorite bead at this cemetery. This barrel bead is the earliest record of such a fluorite bead in China, dating back to approximately 1385–1256 BCE. Comparing the unearthed records of fluorite beads in eastern China spanning from the Neolithic Age to the Western Zhou dynasty, we notice that in the early Western Zhou period, fluorite beads found in élite burials are only in barrel or biconical shapes, both of which first appeared in the eastern region of Xinjiang, such as the Tianshanbeilu cemetery in Hami and the Yanghai cemetery in the Turpan Basin. We proposed that the barrel fluorite bead drilled by metal tubular drill first appearing in the Tianshanbeilu cemetery might have spread eastward to the Central Plains region and finally constituted a component of the ritual revolutions during the Western Zhou dynasty.

Insights into Co (II)-based hybrid materials for photocatalytic and antioxidant applications

Metal-organic materials are widely used as scaffolds to create porous materials for various applications. However, research on solid compositions from hybrid materials (HB) is limited. This study examines two hybrid components using spectroscopic techniques and single crystal X-ray diffraction. The crystal structure analysis reveals a monoclinic system for compounds Co(HCO2)2·2H2O (I) and (C6H10N2)2[CoCl4]Cl2 (II) in the P21/c space group. Compound I features cobalt octahedra with coordinated formate ions and water molecules, while compound II contains organic cations, anions, and free chlorides with interconnected structural motifs. UV light at 400 nm induces high photocatalytic activity in both complexes, leading to significant degradation rates within 80 minutes. Trapping experiments identify activated species as h+ and •O2−. Antioxidant activity assessments highlight their antioxidative potentials.

Synthesis and molecular structure exploration of novel piperidin-4-one imine derivatives combined with DFT and X-ray: A new class of antioxidant and anti-inflammatory agents

Inflammation is one of the pertinent responses of the body, depending mainly on the process and factors involved in combating the oxidative species produced either by any infection or failure of the antioxidant pathways. In search of new compounds to exhibit antioxidant and anti-inflammatory activity here, we have successfully reported the synthesis of three novel compounds of Piperidin-4-one skeleton by adopting simple and convenient methods. Compound 1, (3, 3-dimethyl-2, 6-bis(3,4,5-trimethoxyphenyl) piperidin-4-one) was synthesized by one-pot Mannich condensation reaction having good yield (88 %). Furthermore in the next step highly functionalized imine derivatives, Compound 2 (3,3-dimethyl-2,6-bis (3,4,5-trimethoxyphenyl) piperidine-4-one) hydrazine carbothioamide) and Compound 3 (3,3-dimethyl-2,6-bis(3,4,5-trimethoxyphenyl) piperidin-4-one oxime) were prepared by the condensation reaction with thiosemicarbazide and hydroxylamine hydrochloride with compound 1, respectively. The structure of the compounds has been deduced by the combined use of modern spectroscopic and single crystal x-ray diffraction (XRD) techniques. in-silico ADMET studies predict pharmacokinetic properties and showed that compounds are non toxic on vital organs. The optimized geometry and reactivity parameters of compounds were further calculated based on the B3LYP/6-31G (d, p) density functional theory (DFT). The negative values of chemical potential follow the trend as 2 (−0.2101) >3 (−0.2198) >1(-0.2233) signifies that all compounds are reactive in nature as evident from in-vitro antioxidant and anti-inflammatory response were determined by using the DDPH assay and protein denaturation methods respectively. Compounds possess good radical scavenging activity having IC 50 values 30.392 μM (2), 37.802 (1) μM, and 72.285 (3) μM, and anti-inflammatory response in same manner indicating that 2 (71.3 %) is more active than compound 1 (43.5 %) and 3 (39.3 %) marking them as a potential antioxidant and anti-inflammatory agents.

Understanding the NaxMnO2 System: A Thermodynamics and XPS Approach.

The NaxMnO2 system is an important class of materials with potential applications in rechargeable batteries, supercapacitors, catalysts, and gas sensors. This work reports the synthesis of NaxMnO2 (x = 0.39, 0.44, 0.48, 0.66, and 0.70) compounds and their characterization by powder X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), and impedance spectroscopy (IS) techniques. The compounds in this series exhibit a significant variation in their structures with the extent of Na-content. The change in the nature of bonding with increasing Na content was investigated, and its effect on material stability as well as electrotransport properties was investigated. A detailed thermodynamic evaluation of these materials was carried out employing calorimetric techniques, and the data were correlated with changes in the chemical environment around the Na ion. This analysis is crucial for predicting the thermodynamic stability of NaxMnO2 compounds under different environments for their applications in Na-ion batteries.

Structural Regulation of NiFe LDH under Spontaneous Corrosion to Enhance the Oxygen Evolution Properties.

Electrochemical water splitting holds promise for sustainable hydrogen production but restricted by the sluggish reaction kinetics at the anodic oxygen evolution. Herein, we present a room-temperature spontaneous corrosion strategy to convert inexpensive iron (Fe) on iron foam substrates into highly active and stable self-supporting nickel iron layered hydroxide (NiFe LDH) catalysts. The corrosion evolution mechanisms are elucidated combining ex-situ scanning electron microscopy (SEM) and X-ray photo electron spectroscopy (XPS) techniques, demonstrating precise control over the concentration of Ni2+ and reaction time to achieve controllable micro-structures of NiFe LDH. Taking advantage of the self-supporting morphology and hierarchical micro-/nano- structure, the NiFe LDH with optimized Ni2+ concentration and reaction time exhibits significant small overpotentials of 160 mV and 200 mV for the OER at current densities of 10 mA cm-2 and 100 mA cm-2 respectively, showcasing excellent OER activities. Furthermore, this catalyst demonstrates superior reaction kinetics, high electrochemical stability, and excellent integral water splitting performance when coupled with a commercial Pt/C cathode. The energy-efficient, cost-effective, and scalable spontaneous corrosion strategy opens new avenues for the development of high-electrochemical-interface catalysts.

NiFe2O4 nanoparticles grafted sulfonated melamine for rapid magnetic dispersive µ-solid phase extraction of pesticides in apple and pear samples: Greenness evaluation

In this research, a facile and rapid magnetic dispersive µ-solid-phase extraction technique based on novel and high-performance sulfonated melamine-modified NiFe2O4 nanoparticles was developed forsimultaneous extraction and separation of fifteen pesticides followed by gas chromatography-mass spectrometry. The characterization of the synthesized nano-adsorbent was carried out using scanning electron microscopy (SEM), vibrating sample magnetometry (VSM), and Fourier-transform infrared spectroscopy (FT-IR) techniques. The substantial factors including pH, the amount of nano-sorbent, ionic strength, sample volume, and desorption conditions (i.e. desorption solvent type and volume, and desorption time) on the extraction efficiencies of the interest pesticides from apple and pear samples were explored using the matrixed match method. Under the optimum conditions, the linear range of 0.2-500µg kg−1, LODs, and LOQs in the range of 0.065–0.077µg kg−1 and 0.22–0.26µg kg−1 for apple and 0.065–0.085µg kg−1 and 0.22–0.29µg kg−1 for pear were acquired. The intra-day and inter-day precisions were evaluated at three spiked concentration levels (10, 50, and 100 μg kg−1 of each analyte) on the same day and five distinct days, respectively. The RSD (%) values were ≤ 3.6 % for intra-day (n = 6) and ≤ 4.3 % for inter-day (5 days and n = 3) precisions. High relative recoveries of 92.5–98.9 % revealed high potential of the presented method for analysis of pesticides in complex matrixes. Moreover, Analytical Greenness metric approach was applied and consequently confirmed the greenness of the method which accompanied with the green analytical aspects.