Spectroscopy Analysis Research Articles

Combined Effect of Underlayer and Deposition Solution to Optimize the Alignment of Hematite Photoanodes.

This study investigates the optimization of hematite (α-Fe2O3) photoanodes for enhanced photoelectrochemical (PEC) performance and reproducibility, which are crucial for photocatalytic applications. Despite hematite's potential, hindered by inherent limitations, significant improvements were realized by introducing a titanium dioxide (TiO2) underlayer and ethanol-modified deposition. The influence of the deposition methods was understood by potential-dependent photoelectrochemical impedance spectroscopy analysis. The introduction of the TiO2 underlayer effectively increased the density of states, preferable for the electron transport in the bulk hematite, and the ethanol deposition on a TiO2 underlayer led to a stable surface state formation (S1 state) for the photoexcited hole transfer. This analysis illuminated the intricate interplay between electron transport in the bulk and photogenerated hole transfer at the solution interface, thereby facilitating smoother charge transfer. These findings underscore the viability of surface engineering and meticulous process optimization in addressing critical challenges in photocatalyst development.

Preparation and characterization of AChE immobilized magnetic bio-nanocomposites (Fe3O4@Cht/Au) for pesticide detection.

Free enzymes cause difficulties in many applications due to their insufficient stability, loss of activity in a short time, and most importantly, although they are costly, they are used only once in reactions, lose their effect and cannot be recovered from the environment. Magnetic nanoparticles coated with biocompatible polymeric material are potential candidates for promising enzyme carriers due to their multifunctional pore surfaces, easy removal from the environment provided by the magnetization, ability to main stability under various harsh conditions. This study prepared a biosensor candidate based on the inhibiting acetylcholinesterase enzyme by organophosphate pesticides from chitosan-coated magnetic nanoparticles doped with gold. Transmission electron microscopy, scanning electron microscopy, X-ray diffraction diffractometry, and Fourier transform infrared spectroscopy analysis confirmed the structure of synthesized nanocomposites. Magnetic characteristics of the nanocomposites were assessed using VSM. Bio-nanocomposite (Fe3O4@Cht/Au/AChE) was used to determine environmental pollutants qualitatively. Remediation of organophosphate-containing wastewater is an essential issue for environmental sustainability. In this work, Dichlorvos and Chlorpyrifos were selected as organic pollutants to assess the enzymatic activity of immobilized Fe3O4@Cht/Au/AChE. Optimum conditions for AChE enzyme were immobilized nanostructures (Fe3O4@Cht/Au/AChE) were determined. The optimum pH for the immobilized enzyme was found to be 8, and the optimum temperature was found to be 60 °C. Retained immobilized enzyme activity is found to be around 50% for the 20th reuse. In the presence of 150 µL pesticide, retained immobilized enzyme activity is found to be around 25%. Method validation was performed for pesticides. When using immobilized AChE, the LOD (limit of detection)-LOQ (limit of quantitation) values for Dichlorovos and Chlorpyrifos was obtained in the range of 0.0087-0.029 nM and 0.0014-0.0046 nM, respectively. The relative standard deviation (RSD%) values, which are indicators of precision, were found to be below 2%.

Evidence of microplastics in the polychaete worm (capitellids-Capitella capitata) (Fabricicus, 1780) along Thoothukudi region.

Research on the occurrence of microplastics in invertebrates of the Thoothukudi region is limited. Capitellids are non-selective suspension feeders and are usually used as bioindicator of water pollution. Hence, an investigation was carried out to identify the microplastic occurrence in the capitellids (Capitella capitata) (Fabricius, 1780) collected from the Vellapatti and Spic Nagar sites of the Thoothukudi region. Result from this investigation showed the occurrence of 0.21 ± 0.17 items/indiv and a mean abundance of 13.33% in Thoothukudi coast. The mean microplastic abundance in the capitellids was significantly higher in the Spic Nagar (0.26 ± 0.19 MPs/indiv), probably due to the dumping of plastic waste, fishing and recreational activities. However, no significant difference was observed between seasons. Only fragments (Vellapatti 66.66% and Spic Nagar 33.33%) and fibre-shaped microplastics (Vellapatti 50% and Spic Nagar 50%) were identified. The size and colour of the microplastics dominant in both sites were 1-2mm (Vellapatti 77.77% and Spic Nagar 75%) and blue (Vellapatti 88.88% and Spic Nagar 87.5%), respectively. The results of Attenuated Total Reflectance-Fourier Transform Infrared Spectroscopy (ATR-FTIR) analysis revealed the presence of polyethylene (PE) and polypropylene (PP) polymers in the capitellids. PE polymer is one of the most common sources of microplastics contamination globally and it is also frequently found in the coastal waters of Thoothukudi. This accounted for the high occurrence of PE polymers in the capitellids with the occurrence rate of 77% in Vellapatti and 58.52% in Spic Nagar. The present study provides baseline data on the occurrence, characterization (shapes, sizes and colours) and qualitative analysis of the microplastics in the capitellids, and their presence was influenced by their non-selective feeding habits. Further, future studies have to be conducted to identify the levels of microplastics in different polychaetes and other invertebrates to better understand the effects of microplastic pollution in invertebrate communities.

Microplastic Pollution in Surface Sediments of Coromandel Coastline, South-East Coast, India: Diversity Index, Carbonyl Index, Pollution Load Index, Risk Fraction and MPs Inventory.

The investigation along the Coromandel coastline of South-east India focused on assessing microplastics abundance using Simpson's diversity index , Degradation-carbonyl index (), Pollution load index and Ecological risk fraction ). These indices evaluated the dissemination and transportation of MPs across a 1076 km stretch divided into five zones from Chennai to Kanyakumari. During the wet season, average microplastics abundance (101 ± 36.6 items/kg dw) was lower compared to the dry season (143 ± 56.2 items/kg dw). Notably, 54% and 45% of microplastics were found in the 0.1 to 0.5 mm size range, with 45% and 64% being colored microplastics, and 80% and 71% being fibers during the wet and dry seasons respectively. Micro-Fourier-transform infrared spectroscopy (μFTIR) analysis showed rayon (34%) and PE (64%) dominance in ports and estuaries during both seasons. Kottaipattinam Port exhibited higher diversity indices ( compared to other zones, with an overall diversity index of 0.57. Notably, among the values (n=96), only 12 fell within the moderate photo-chemical oxidation range (0.16-0.35), while the majority (n=60) surpassed 0.35 indicating higher oxidation levels, with some (n=24) exceeding 0.50, signifying extreme oxidation. revealed that 42% of sampling stations had very low to negligible MP contamination levels in ports and estuaries. However, ecological risk fraction values ranged from 10.2 to 13,670, with 27% of values exceeding 1500, indicating higher coastal ecological risk in 13 sampling stations.

A comprehensive study of experimental and theoretical characterization and in silico toxicity analysis of new molecules.

In this study, for the first time in the literature, a 2-(3-methoxyphenylamino)-2-oxoethyl acrylate (3MPAEA) molecule was synthesized in two steps, and a 2-chloro-N-(3-methoxyphenyl)acetamide (m-acetamide) was obtained in the first step. Experimental results were obtained using FTIR, 1H, and 13C NMR spectroscopy methods for m-acetamide and 3MPAEA compounds created in the laboratory environment and compared with theoretical results. Band gap (BG) energy, chemical hardness, electronegativity, chemical potential, and electrophilicity index were calculated. With vibration spectroscopic analysis, atom-molecule vibrations of the theoretical and experimental peaks of the spectrum were observed. The locations of C and H atoms were determined by nuclear magnetic resonance spectroscopy. The green, blue, and red regions of the potential energy map (MEP) map were examined. Some observed that the energy thermal, heat capacity, and entropy graphs increased in direct proportion to increasing the temperature in Kelvin, which is known as thermochemistry. The changes in the rotation, translation, and vibration of the molecule as its temperature increased were examined. When the thermochemistry surface map was examined, some observed that the temperature was high in the middle binding site of the molecules. Covalent interactions were graphed using the non-covalent interactions (NCIs) calculation method. In silico toxicity studies were carried out for m-acetamide and 3MPAEA molecules: fathead minnow LC50 (96 h), Daphnia magna LC50 (48 h), Tetrahymena pyriformis IGC50 (48 h), oral rat LD50, water solubility, bioconcentration factor, developmental toxicity, mutation, normal boiling point, flash point, melting point, density, thermal conductivity, viscosity, vapor pressure, etc. parameters were investigated.

Harnessing the duality of bases toward controlled color and fluorescence.

Bases can promote keto-enol tautomerism, a prevalent form of prototropic tautomerism, and facilitate the ring opening of anhydride ring structures. The intrinsic chemical distinctions between these processes provide an opportunity to modulate these seemingly parallel reactions. However, this potential remains largely unexplored. In this work, we report homophthalic anhydride, the first molecule exhibiting simultaneous halochromism, turn-on fluorescence (halofluorochromism), and subsequent self-destruction. Through comprehensive spectroscopic analysis and theoretical calculations, we unravel the mechanisms underlying these phenomena, revealing that the pivotal roles of the base's basicity and nucleophilicity specifically allow us to achieve controlled durations of color change and turn-on fluorescence. Capitalizing on these intriguing properties, we develop a highly dynamic CMY (cyan-magenta-yellow) palette ideal for entity encryption and anti-counterfeiting applications. Our work reshapes the understanding of the relationship between the basicity and nucleophilicity of bases, enriching the comprehension of keto-enol tautomerism and homophthalic anhydride chemistry, and unveils a spectrum of potential applications.

Bioassay-guided isolation of cycloartane-type triterpenes, their cytotoxic properties and identification of potential chemical markers from Geniotrigona thoracica propolis.

Phytochemical investigation through cytotoxicity bioassay-guided isolation of Geniotrigona thoracica propolis led to the identification of five cycloartane-type triterpenes, including mangiferonic acid 1, ambonic acid 2, mangiferolic acid 3, ambolic acid 4 and cycloartenol 5. Their structures were established based on detailed spectroscopic analysis and comparison with literature data. Compounds 1-5 were isolated for the first time in this species. From cytotoxicity MTT assay, compound 3 inhibited the growth of breast (MCF-7) and hepatocellular carcinoma (HepG2) cancer cell lines with IC50 of 5.08 and 4.82 µg/mL, respectively. Cytotoxicity of compounds 1-5 were reported for the first time against HepG2 cancer cell lines. Compounds 1-4 were suggested to serve as main and/or analytical markers for G. thoracica propolis based on HPLC analysis. To our knowledge, this is the first report on the isolation of bioactive constituents and identification of chemical markers for G. thoracica propolis.

Triterpenes from antler-shaped fruiting body of Ganoderma lucidum and their hepatoprotective activities.

Seven previously undescribed triterpenes (1-7), as well as one triterpene (8) previously described as a synthetic product, were isolated from the antler-shaped fruiting body of Ganoderma lucidum. Their structures were established based on comprehensive spectroscopy analysis. At a concentration of 10 μM, (24E)-3-oxo-15α-acetoxy-lanosta-7,9(11),24-trien-26-al (3) and (24R,25S)-3-oxo-lanosta-7,9(11)-dien-25-ethoxyl-24,26-diol (5) provided significant protection against acetaminophen-induced necrosis in human HepG2 liver cancer cells, and the cell survival rates were 69.7 and 76.1% respectively, similar to that of the positive control (glutathione, 72.1%). Based on the present results, these compounds could be potential hepatoprotective agents.

Elucidating the Role of Electron Transfer in the Photoluminescence of MoS2 Quantum Dots Synthesized by fs-Pulse Ablation.

Herein, MoS2 quantum dots (QDs) with controlled optical, structural, and electronic properties are synthesized using the femtosecond pulsed laser ablation in liquid (fs-PLAL) technique by varying the pulse width, ablation power, and ablation time to harness the potential for next-generation optoelectronics and quantum technology. Furthermore, this work elucidates key aspects of the mechanisms underlying the near-UV and blue emissions the accompanying large Stokes shift, and the consequent change in sample color with laser exposure parameters pertaining to MoS2 QDs. Through spectroscopic analysis, including UV-visible absorption, photoluminescence, and Raman spectroscopy, we successfully unraveled the mechanisms for the change in optoelectronic properties of MoS2 QDs with laser parameters. We realize that the occurrence of a secondary phase, specifically MoO3-x, is responsible for the significant Stokes shift and blue emission observed in this QD system. The primary factor influencing these activities is the electron transfer observed between these two phases, as validated by excitation-dependent photoluminescence and XPS and Raman spectroscopies.

Improved Compatibility of α-NaMnO2 Cathodes at the Interface with Safer and more Reliable Electrolytes.

The behaviour and compatibility of monoclinic sodium manganite, α-NaMnO2, cathodes at the interface with electrolytes based on the 1-ethyl-3-methylimidazolium bis(fluorosulfonyl)imide (EMIFSI) and N-trimethyl-N-butylammonium bis(fluorosulfonyl)imide (N1114FSI) ionic liquids is presented and discussed. The Na+ insertion process was analysed through cyclic voltammetry tests combined with impedance spectroscopy measurements and the cell performance was tested by charge-discharge cycles. XPS and FIB-SEM measurements allowed analysis of the surface composition and the morphology of post-mortem cathodes. Overall, the α-NaMnO2 cathode showed high reversibility in N1114FSI-based electrolyte, delivering 60 % of the initial capacity after 1200 cycles in conjunction with a Coulombic efficiency above 99%. To our knowledge, these very promising results are the best result obtained till now for monolithic α-NaMnO2 cathodes, are ascribable to the formation of a stable passive layer onto the electrode surface, as confirmed by spectroscopic analysis.

Unraveling the Phosphorus Adsorption Mechanisms in Three-dimensional Reduced Graphene Oxide Materials.

To prevent eutrophication, controlling the phosphate concentration levels is one of the most important issues in surface water management. One of the most utilized methods is phosphate adsorption. However, its application faces a bottleneck due to the unclear understanding of adsorption and interaction mechanisms. The present work unlocks the phosphorus adsorption mechanisms in three-dimensional reduced graphene oxide with different reduction levels and pore sizes to remove phosphate from water using experiments and multiscale simulations. Experiments were performed to evaluate the influence of pH, ionic strength, and temperature on the adsorption. Molecular Dynamics and Ab Initio simulations evaluated the influence of the pore size and oxidation degrees of the materials. We show that the adsorption capacity of the materials increases with increasing pH and ionic strength and decreasing temperature. It is observed that the more oxidized the material and the less compact the structure, the better the adsorption. These results are theoretically explained in terms of the interaction of functional groups and the clustering of phosphate ions, which results in better adsorption in materials with larger pores. The underlying mechanisms for the 3D-reduced graphene oxide performance were confirmed by spectroscopy analysis. All the results show that 3D-reduced graphene oxide can sorb phosphate in different complex water remediation systems with characteristics that can be modulated by changing the material synthesis method.

Deterministic positioning and alignment of a single-molecule exciton in plasmonic nanodimer for strong coupling.

Experimental realization of strong coupling between a single exciton and plasmons remains challenging as it requires deterministic positioning of the single exciton and alignment of its dipole moment with the plasmonic fields. This study aims to combine the host-guest chemistry approach with the cucurbit[7]uril-mediated active self-assembly to precisely integrate a single methylene blue molecule in an Au nanodimer at the deterministic position (gap center of the nanodimer) with the maximum electric field (EFmax) and perfectly align its transition dipole moment with the EFmax, yielding a large spectral Rabi splitting of 116 meV for a single-molecule exciton-matching the analytical model and numerical simulations. Statistical analysis of vibrational spectroscopy and dark-field scattering spectra confirm the realization of the single exciton strong coupling at room temperature. Our work may suggest an approach for achieving the strong coupling between a deterministic single exciton and plasmons, contributing to the development of room-temperature single-qubit quantum devices.

Two new jatrophane diterpenoids from Euphorbia helioscopia with activity towards autophagic flux.

Nine jatrophane diterpenoids were isolated from the whole plant Euphorbia helioscopia, including two new ones, helioscopnins A (1) and B (2). Comprehensive spectroscopic data analysis and ECD calculations elucidated their structures, including absolute configurations. All compounds were evaluated for bioactivity towards autophagic flux by flow cytometry using HM mCherry-GFP-LC3 cells. Compounds 1, 3, 4, 5, 8, and 9 significantly increased autophagic flux.

Insights into the impact of complex phosphates on acid-induced milk fan gel properties: Texture, rheological, microstructure, and molecular forces.

Milk fan cheese, a type of stretched -cheese, presents challenges in its stretch-forming. This study investigated the impacts of complex phosphates (sodium tripolyphosphate and sodium dihydrogen phosphate, STPP-DSP) on the gelling properties of acid-induced milk fan gel and the mechanisms contributing to its stretch-forming. The treatment of milk fan gel with STPP-DSP resulted in improved functional and textural properties compared with the control group. In particular, drawing length increased significantly from 69.67 nm to 80.33 nm, and adhesiveness increased from 1737.89 g/mm to 1969.79 g/mm. The addition of STPP-DSP also led to increased viscosity, elastic modulus (G'), and viscous modulus (G"). Microstructural analysis revealed the formation of a fibrous structure within the gel after STPP-DSP treatment, facilitating uniform embedding of fat globules and emulsification. Structural analysis showed that the addition of STPP-DSP increased β-fold and decreased random coiling of the gel, facilitating the unfolding of protein structures. Additionally, UV absorption spectroscopy and excitation-emission matrix spectroscopy results indicated the formation of a chelate between STPP-DSP and milk fan gel, increasing protein-protein molecular interactions. Evidence from differential scanning calorimetry and x-ray diffraction demonstrated the formation of sodium caseinate chelate. Fourier transform infrared spectroscopy and zeta potential analysis revealed that the sodium caseinate chelate formed through hydrophobicity, hydrogen bonding, and electrostatic forces. These findings provided theoretical insights into how phosphates can improve the stretch-forming of milk fan gel, facilitating the application of phosphate additives in stretched -cheese processing.

Biodecolorization and biodegradation of Reactive Green 12 textile industry dye and their post-degradation phytotoxicity-genotoxicity assessments.

The employment of versatile bacterial strains for the efficient degradation of carcinogenic textile dyes is a sustainable technology of bioremediation for a neat, clean, and evergreen globe. The present study has explored the eco-friendly degradation of complex Reactive Green 12 azo dye to its non-toxic metabolites for safe disposal in an open environment. The bacterial degradation was performed with the variable concentrations (50, 100, 200, 400, and 500mg/L) of Reactive Green 12 dye. The degradation and toxicity of the dye were validated by high-performance liquid chromatography, Fourier infrared spectroscopy analysis, and phytotoxicity and genotoxicity assay, respectively. The highest 97.8% decolorization was achieved within 12h. Alternations in the peaks and retentions, thus, along with modifications in the functional groups and chemical bonds, confirmed the degradation of Reactive Green 12. The disappearance of a major peak at 1450cm-1 corresponding to the -N=N- azo link validated the breaking of azo bonds and degradation of the parent dye. The 100% germination of Triticum aestivum seed and healthy growth of plants verified the lost toxicity of degraded dye. Moreover, the chromosomal aberration of Allium cepa root cell treatment also validated the removal of toxicity through bacterial degradation. Thereafter, for efficient degradation of textile dye, the bacterium is recommended for adaptation to the sustainable degradation of dye and wastewater for further application of degraded metabolites in crop irrigation for sustainable agriculture.

A synergistic combination of 2D MXene and MoO3 nanoparticles for improved gas sensing at room temperature

MXene Ti3C2T x (30% HF-etched, named Ti3C2T x -30) plays a pivotal role in the substantial enhancement of the structural modification of molybdenum trioxide (MoO3). Additionally, as the surface MoO3 molecules come into contact with reducing gas moieties, they actively participate in gas sensing at room temperature. The percentage of Ti3C2T x -30 in the MoO3 matrix was varied at 10%, 20%, and 40%, denoted as MM-10, MM-20, and MM-40, respectively. Structural analysis confirmed the composition of the basic elements and evolution of TiO2 at a higher percentage of Ti3C2T x -30. Spectroscopy analysis showed the interactions between Ti3C2T x -30 and MoO3, showcasing work functions of 6.91 eV, 6.75 eV, and 7.21 eV for MM-10, MM-20, and MM-40, respectively, confirming MM-20 to be an optimum composition. When the samples were exposed to ammonia gas, MM-20 showed a high response (93% for 100 ppm) at room temperature, with a response time of ∼10 s. Compared to bare MoO3, these samples showed ten-fold improvement. The excess electrons on the surface of Ti3C2T x -30 facilitate the formation of O2− species, which also provides stability to the otherwise highly reactive MXene surface. These species actively react with ammonia molecules in the presence of adsorbed MoO3, thereby changing the resistance of the system. This can be a significant step towards imparting high gas sensitivity to metal oxides at room temperature via incorporation of an optimum percentage of optimized Ti3C2T x .

RamanSPy: An Open-Source Python Package for Integrative Raman Spectroscopy Data Analysis.

Raman spectroscopy is a nondestructive and label-free chemical analysis technique, which plays a key role in the analysis and discovery cycle of various branches of science. Nonetheless, progress in Raman spectroscopic analysis is still impeded by the lack of software, methodological and data standardization, and the ensuing fragmentation and lack of reproducibility of analysis workflows thereof. To address these issues, we introduce RamanSPy, an open-source Python package for Raman spectroscopic research and analysis. RamanSPy provides a comprehensive library of tools for spectroscopic analysis that supports day-to-day tasks, integrative analyses, the development of methods and protocols, and the integration of advanced data analytics. RamanSPy is modular and open source, not tied to a particular technology or data format, and can be readily interfaced with the burgeoning ecosystem for data science, statistical analysis, and machine learning in Python. RamanSPy is hosted at https://github.com/barahona-research-group/RamanSPy, supplemented with extended online documentation, available at https://ramanspy.readthedocs.io, that includes tutorials, example applications, and details about the real-world research applications presented in this paper.

Zein/fucoidan-coated phytol nanoliposome: preparation, characterization, physicochemical stability, in vitro release, and antioxidant activity.

To improve phytol bioavailability, a novel method of magnetic stirring and high-pressure homogenization (HPH) combination was used to prepare zein/fucoidan-coated phytol nanoliposomes (P-NL-ZF). The characterization, the simulated in vitro digestion, and the antioxidant activity of these phytol nanoliposomes from the different processes have been studied. Based on the results of dynamic light scattering (DLS) and gas chromatography-mass spectrometer (GC-MS) analysis, P-NL-ZF prepared through the combination of magnetic stirring and HPH exhibited superior encapsulation efficiency at 76.19% and demonstrated exceptional physicochemical stability under a series of conditions, including storage, pH, and ionic in comparison to single method. It was further confirmed that P-NL-ZF by magnetic stirring and HPH displayed a uniform distribution and regular shape through transmission electron microscopy (TEM). Fourier-transform infrared (FTIR) spectroscopy and differential scanning calorimetry (DSC) analysis showed that electrostatic interactions and hydrogen bonding were the primary driving forces for the formation of composite nanoliposomes. Additionally, an in vitro digestion study revealed that multilayer composite nanoliposomes displayed significant and favorable slow-release properties (58.21%) under gastrointestinal conditions compared with traditional nanoliposomes (82.36%) and free phytol (89.73%). The assessments of chemical and cell-based antioxidant activities demonstrated that the coating of zein/fucoidan on phytol nanoliposomes resulted in enhanced effectiveness in scavenging activity of ABTS free radical and hydroxyl radical and mitigating oxidative damage to HepG2 cells. Based on our studies, the promising delivery carrier of zein/fucoidan-coated nanoliposomes is contributed to the encapsulation of hydrophobic natural products and enhancement of their biological activity. © 2024 Society of Chemical Industry.

Modification of transition pathways in polarized resonance Raman spectroscopy for carbon nanotubes by highly confined near-field light

We observed a modification of transition pathways in polarized resonance Raman spectroscopy during tip-enhanced Raman spectroscopy (TERS) analysis of metallic carbon nanotubes (CNTs). At a spatial resolution reaching up to the sub-nanometer regime, the signal intensity of the typical D-band is observed to be even higher than the intensity of the G-band all over the probed CNTs in TERS imaging. The measured D-band is attributed to the non-vertical transitions of electrons in k-space that are facilitated by highly confined near-field light at the tip–sample junction of our scanning tunneling microscope based TERS system. The D-band signal was observed even when the CNTs were excited by light polarized perpendicular to the tube axis that corresponds to electronic excitations between different cutting line numbers of a CNT. By combining the electron pathways brought about by both the near-field light and its polarization, we found a unique optical transition of electrons of CNTs in near-field Raman spectroscopy.

Lead Speciation, Bioaccessibility, and Sources for a Contaminated Subset of House Dust and Soils Collected from Similar United States Residences.

Residential lead (Pb) exposure is of critical concern to families globally as Pb promotes severe neurological effects in children, especially those less than 5 years old, and no blood lead level is deemed safe by the US Center for Disease Control. House dust and soils are commonly thought to be important sources of Pb exposure. Probing the relationship between house dust and soil Pb is critical to understanding residential exposure, as Pb bioavailability is highly influenced by Pb sources and/or species. We investigated paired house dust and soil collected from homes built before 1978 to determine Pb speciation, source, and bioaccessibility with the primary goal of assessing chemical factors driving Pb exposure in residential media. House dust was predominately found to contain (hydro)cerussite (i.e., Pb (hydroxy)carbonate) phases commonly used in Pb-based paint that, in-turn, promoted elevated bioaccessibility (>60%). Pb X-ray absorption spectroscopy, μ-XRF mapping, and Pb isotope ratio analysis for house dust and soils support house dust Pb as chemically unique compared to exterior soils, although paint Pb is expected to be a major source for both. Soil pedogenesis and increased protection from environmental conditions (e.g., weathering) in households is expected to greatly impact Pb phase differences between house dust and soils, subsequently dictating differences in Pb exposure.