Spectrometer/Telescope For Imaging X-rays Research Articles

Variation of the electron flux spectrum along a solar flare loop as inferred from STIX hard X-ray observations

Context. Regularized imaging spectroscopy was introduced for the construction of electron flux images at different energies from count visibilities recorded by the Reuven Ramaty High Energy Solar Spectroscopic Imager (RHESSI). In this work we seek to extend this approach to data from the Spectrometer/Telescope for Imaging X-rays (STIX) on board the Solar Orbiter mission. Aims. Our aims are to demonstrate the feasibility of regularized imaging spectroscopy as a method for analysis of STIX data, and also to show how such an analysis can lead to insights into the physical processes affecting the nonthermal electrons responsible for the hard X-ray emission observed by STIX. Methods. STIX records imaging data in an intrinsically different manner from RHESSI. Rather than sweeping the angular frequency plane in a set of concentric circles (one circle per detector), STIX uses 30 collimators, each corresponding to a specific angular frequency. For this work, we derived an appropriate modification to the previous computational approach for the analysis of the visibilities observed by STIX. This approach also allows for the observed count data to be placed into nonuniformly spaced energy bins. Results. We show that the regularized imaging spectroscopy approach is not only feasible for an analysis of the visibilities observed by STIX, but also more reliable. The application of the regularized imaging spectroscopy technique to several well-observed flares reveals details of the variation of the electron flux spectrum throughout the flare sources. Conclusions. We conclude that the visibility-based regularized imaging spectroscopy approach is well suited for the analysis of STIX data. We also used STIX electron flux spectral images to track, for the first time, the behavior of the accelerated electrons during their path from the acceleration site in the solar corona toward the chromosphere.

Identifying synergies between VLBI and STIX imaging

Context. Reconstructing an image from noisy, sparsely sampled Fourier data is an ill-posed inverse problem that occurs in a variety of subjects within science, including data analysis for Very Long Baseline Interferometry (VLBI) and the Spectrometer/Telescope for Imaging X-rays (STIX) with respect to solar observations. The need for high-resolution, high-fidelity imaging fosters the active development of a range of novel imaging algorithms in a variety of different algorithmic settings. However, despite these ongoing, parallel developments, such synergies remain unexplored. Aims. We study, for the first time, the synergies between the data analysis for the STIX instrument and VLBI. In particular, we compare the methodologies that have been developed in both fields and evaluate their potential. In this way, we identify key trends in the performance of several algorithmic ideas and draw recommendations for the future spending of resources in the study and implementation of novel imaging algorithms. Methods. To this end, we organized a semi-blind imaging challenge with data sets and source structures that are typical for sparse VLBI, specifically in the context of the Event Horizon Telescope (EHT) as well as STIX observations. We used 17 different algorithms from both communities, from six different imaging frameworks, in the challenge, making this work the largest scale code comparison for STIX and VLBI to date. Results. We identified strong synergies between the two communities, as proven by the success of the imaging methods proposed for STIX in imaging VLBI data sets and vice versa. Novel imaging methods outperform the standard CLEAN algorithm significantly in every test case. Improvements over the performance of CLEAN offer deeper updates to the inverse modeling pipeline necessary or, consequently, the possibility to replace inverse modeling with forward modeling. Entropy-based methods and Bayesian methods perform best on STIX data. The more complex imaging algorithms utilizing multiple regularization terms (recently proposed for VLBI) add little to no additional improvements for STIX. However, they do outperform the other methods on EHT data, which correspond to a larger number of angular scales. Conclusions. This work demonstrates the great synergy between the STIX and VLBI imaging efforts and the great potential for common developments. The comparison identifies key trends on the efficacy of specific algorithmic ideas for the VLBI and the STIX setting that may evolve into a roadmap for future developments.

Relative Yield of Thermal and Nonthermal Emission during Weak Flares Observed by STIX during 2021 September 20–25

The disparate nature of the thermal–nonthermal energy partition during flares, particularly during weak flares, is still an open issue. Following the Neupert effect, quantifying the relative yield of X-ray emission in different energy bands can enable the inferring of the underlying energy release mechanism. During 2021 September 20–25, the Solar Orbiter mission—being closer to the Sun (∼0.6 au) and having a moderate separation angle (<40°) from the Sun–Earth line—offered a unique opportunity to analyze multiwavelength emission from ∼200 (mostly weak) flares, commonly observed by the Spectrometer Telescope for Imaging X-rays (STIX), STEREO-A, GOES, and the Solar Dynamics Observatory. Associating the quotient (q f ) of hard X-ray fluence (12–20 keV) and soft X-ray flux (4–10 keV) with the peak soft X-ray flux enabled us to identify strongly nonthermal flares. A multiwavelength investigation of spectral and imaging-mode observations of the 20 strongly nonthermal weak flares reveals an inverse relationship of q f with the emission measure (and density), and a positive relationship with the flare plasma temperature. This indicates that the plasma in tenuous loops attains higher temperatures compared to that in the denser loops, in response to nonthermal energy deposition. This is in agreement with the plasma parameters of the coronal loops, as derived by applying the one-dimensional Palermo–Harvard hydrodynamical code to coronal loop plasma with different initial coronal loop base pressures when subjected to similar heating inputs. Our investigation, therefore, indicates that the plasma parameters of the flaring loop in the initial phase have a decisive role in the thermal–nonthermal energy partitioning.

A Modeling Investigation for Solar Flare X-Ray Stereoscopy with Solar Orbiter/STIX and Earth-orbiting Missions

The Spectrometer/Telescope for Imaging X-rays (STIX) on board Solar Orbiter (SolO) provides a unique opportunity to systematically perform stereoscopic X-ray observations of solar flares with current and upcoming X-ray missions at Earth. These observations will produce the first reliable measurements of hard X-ray (HXR) directivity in decades, providing a new diagnostic of the flare-accelerated electron angular distribution and helping to constrain the processes that accelerate electrons in flares. However, such observations must be compared to modeling, taking into account electron and X-ray transport effects and realistic plasma conditions, all of which can change the properties of the measured HXR directivity. Here, we show how HXR directivity, defined as the ratio of X-ray spectra at different spacecraft viewing angles, varies with different electron and flare properties (e.g., electron angular distribution, highest-energy electrons, and magnetic configuration), and how modeling can be used to extract these typically unknown properties from the data. Finally, we present a preliminary HXR directivity analysis of two flares, observed by the Fermi Gamma-ray Burst Monitor and SolO/STIX, demonstrating the feasibility and challenges associated with such observations, and how HXR directivity can be extracted by comparison with the modeling presented here.

Investigations of Flaring Plasma Parameters during an M-class Flare Using the Differential Evolution Method and XSM/Chandrayaan-2 Observations

We employ the differential evolution (DE) method to analyze observations from the Solar X-Ray Monitor on board the Chandrayaan-2 spacecraft. DE belongs to the family of evolutionary algorithms that find solutions using mechanisms inspired by biological processes. This approach enables us to simultaneously calculate the distribution of the differential emission measure and elemental abundances through an iterative process. We establish a model for the emission sources of flaring plasma, incorporating temperature, emission measure, and abundances of eight elements: Mg, Al, Si, S, Ar, Ca, Fe, and Ni, for an M3.9 GOES-class solar flare that occurred on 2021 May 7 (SOL2021-05-07T19:04). Our analysis covers various phases of the flare, determining the evolution of temperature, emission measure, and elemental abundances. Additionally, utilizing data from the Spectrometer Telescope for Imaging X-rays on board the Solar Orbiter, we investigate the evolution of hard X-ray source morphology, source volume, electron density, and thermal behavior of the flaring plasma throughout the event. The results reveal notable variations in elemental abundances between photospheric and coronal values during different flare phases. This emphasizes the significance of elemental abundance information in comprehending X-ray emissions during solar flares.

Unbiased CLEAN for STIX in Solar Orbiter

CLEAN is an iterative deconvolution method for radio and hard-X-ray solar imaging. In a specific step of its pipeline, CLEAN requires the convolution between an idealized version of the instrumental point-spread function (PSF), and a map collecting point sources located at positions from where most of the flaring radiation is emitted. This step has highly heuristic motivations and the shape of the idealized PSF, which depends on the user’s choice, impacts the shape of the reconstruction. This study introduces a user-independent release of CLEAN for image reconstruction from observations recorded by the Spectrometer/Telescope for Imaging X-rays (STIX) on board Solar Orbiter. Specifically, we show here that this unbiased release of CLEAN outperforms the standard version of the algorithm, with reconstructions in line with the ones offered by other imaging methods developed in the STIX framework.

Multiple injections of energetic electrons associated with the flare and CME event on 9 October 2021

Context. We study the solar energetic particle (SEP) event observed on 9 October 2021 by multiple spacecraft, including Solar Orbiter. The event was associated with an M1.6 flare, a coronal mass ejection, and a shock wave. During the event, high-energy protons and electrons were recorded by multiple instruments located within a narrow longitudinal cone. Aims. An interesting aspect of the event was the multi-stage particle energisation during the flare impulsive phase and also what appears to be a separate phase of electron acceleration detected at Solar Orbiter after the flare maximum. We aim to investigate and identify the multiple sources of energetic electron acceleration. Methods. We utilised SEP electron observations from the Energetic Particle Detector (EPD) and hard X-ray (HXR) observations from the Spectrometer/Telescope for Imaging X-rays (STIX) on board Solar Orbiter, in combination with radio observations at a broad frequency range. We focused on establishing an association between the energetic electrons and the different HXR and radio emissions associated with the multiple acceleration episodes. Results. We find that the flare was able to accelerate electrons for at least 20 min during the non-thermal phase, observed in the form of five discrete HXR pulses. We also show evidence that the shock wave contributed to the electron acceleration during and after the impulsive flare phase. The detailed analysis of EPD electron data shows that there was a time difference in the release of low- and high-energy electrons, with the high-energy release delayed. Also, the observed electron anisotropy characteristics suggest a different connectivity during the two phases of acceleration.

Multi-point study of the energy release and impulsive CME dynamics in an eruptive C7 flare

Context. The energy release in eruptive flares and the kinematics of the associated coronal mass ejections (CMEs) are interlinked and require favorable observing positions as both on-disk and off–limb signatures are necessary to characterize these events. Aims. We combine observations from different vantage points to perform a detailed study of a long duration eruptive C7 class flare that occurred on 17 April 2021 and was partially occulted from Earth view. The dynamics and thermal properties of the flare-related plasma flows, the flaring arcade, and the energy releases and particle acceleration are studied together with the kinematic evolution of the associated CME in order to place this long duration event in context of previous eruptive flare studies. Methods. We use data from the Spectrometer-Telescope for Imaging X-rays (STIX) onboard the Solar Orbiter to analyze the spectral characteristics, timing, and spatial distribution of the flare X-ray emission. Data from the Extreme Ultraviolet Imager (EUVI) onboard the Solar TErrestrial RElations Observatory-Ahead (STEREO-A) spacecraft are used for context images as well as to track the ejected plasma close to the Sun. With Atmospheric Imaging Assembly extreme ultraviolet (EUV) images from the Solar Dynamics Observatory, the flare is observed off–limb and differential emission measure maps are reconstructed. The coronagraphs onboard STEREO-A are used to track the CME out to around 8 R⊙. Results. The flare showed hard X-ray (HXR) bursts over the duration of an hour in two phases lasting from 16:04 UT to 17:05 UT. During the first phase, a strong increase in emission from hot plasma and impulsive acceleration of the CME was observed. The CME acceleration profile shows a three-part evolution of slow rise, acceleration, and propagation in line with the first STIX HXR burst phase, which is triggered by a rising hot (14 MK) plasmoid. During the CME acceleration phase, we find signatures of ongoing magnetic reconnection behind the erupting structure, in agreement with the standard eruptive flare scenario. The subsequent HXR bursts that occur about 30 min after the primary CME acceleration show a spectral hardening (from δ ≈ 7 to δ ≈ 4) but do not correspond to further CME acceleration and chromospheric evaporation. Therefore, the CME-flare feedback relationship may only be of significance within the first 25 min. of the event under study, as thereafter the flare and the CME eruption evolve independently of each other.

Characterising fast-time variations in the hard X-ray time profiles of solar flares using Solar Orbiter’s STIX

Aims. The aim of this work is to develop a method to systematically detect and characterise fast-time variations (≳1 s) in the non-thermal hard X-ray (HXR) time profiles of solar flares using high-resolution data from Solar Orbiter’s Spectrometer/Telescope for Imaging X-rays (STIX). Methods. The HXR time profiles were smoothed using Gaussian Process (GP) regression. The time profiles were then fitted with a linear combination of Gaussians to decompose the time profile. From the Gaussian decomposition, key characteristics such as the periodicity, full width at half maximum, time evolution, and amplitude can be derived. Results. We present the outcome of applying this method to four M and X GOES-class flares from the first year of Solar Orbiter science operations. The HXR time profiles of these flares were decomposed into individual Gaussians and their periods were derived. The quality of fit is quantified by the standard deviation of the residuals (difference between observed and fitted curve, normalised by the error on the observed data), for which we obtain ≤1.8 for all flares presented. In this work, the first detection of fast-time variations with Solar Orbiter’s STIX instrument has been made on timescales across the range of 4−128 s. Conclusions. A new method for identifying and characterising fast-time variations in the non-thermal HXR profiles of solar flares has been developed, in which the time profiles are fit with a linear combination of Gaussian bursts. The opportunity to study time variations in flares has greatly improved with the new observations from STIX on Solar Orbiter.

Solar flare hard X-rays from the anchor points of an eruptive filament

Context. We present an analysis of a GOES M1.8 flare with excellent observational coverage in UV, extreme-UV (EUV), and X-ray, including observations from the Interface Region Imaging Spectrograph (IRIS), from the Solar Dynamics Observatory (SDO) with the Atmospheric Imaging Assembly (AIA), from the Hinode/EUV Imaging Spectrometer (EIS), from the Hinode/X-ray Telescope (XRT), and from Solar Orbiter with the Spectrometer/Telescope for Imaging X-rays (STIX). Hard X-ray emission is often observed at the footpoints of flare loops and is occasionally observed in the corona. In this flare, four nonthermal hard X-ray sources are seen. Aims. Our aim is to understand why we can observe four individual nonthermal sources in this flare and how we can characterize the physical properties of these four sources. Methods. We used the multiwavelength approach to analyze the flare and characterize the four sources. To do this, we combined imaging at different wavelengths and spectroscopic fitting in the EUV and X-ray range. Results. The flare is eruptive with an associated coronal mass ejection, and it shows the classical flare picture of a heated flare loop seen in EUV and X-rays, and two nonthermal hard X-ray footpoints at the loop ends. In addition to the main flare sources, we observed two outer sources in the UV, EUV, and nonthermal X-ray range located away from the main flare loop to the east and west. The two outer sources are clearly correlated in time, and they are only seen during the first two minutes of the impulsive phase, which lasts a total of about four minutes. Conclusions. Based on the analysis, we determine that the outer sources are the anchor points of an erupting filament. The hard X-ray emission is interpreted as flare-accelerated electrons that are injected upward into the filament and then precipitate along the filament toward the chromosphere, producing Bremsstrahlung. While sources like this have been speculated to exist, this is the first report of their detection.

First Hard X-Ray Imaging Results by Solar Orbiter STIX

The Spectrometer/Telescope for Imaging X-rays (STIX) is one of six remote sensing instruments on-board Solar Orbiter. The telescope applies an indirect imaging technique that uses the measurement of 30 visibilities, i.e., angular Fourier components of the solar flare X-ray source. Hence, the imaging problem for STIX consists of the Fourier inversion of the data measured by the instrument. In this work, we show that the visibility amplitude and phase calibration of 24 out of 30 STIX sub-collimators has reached a satisfactory level for scientific data exploitation and that a set of imaging methods is able to provide the first hard X-ray images of solar flares from Solar Orbiter. Four visibility-based image reconstruction methods and one count-based are applied to calibrated STIX observations of six events with GOES class between C4 and M4 that occurred in May 2021. The resulting reconstructions are compared to those provided by an optimization algorithm used for fitting the amplitudes of STIX visibilities. We show that the five imaging methods produce results morphologically consistent with the ones provided by the Atmospheric Imaging Assembly on board the Solar Dynamic Observatory (SDO/AIA) in UV wavelengths. The chi ^{2} values and the parameters of the reconstructed sources are comparable between methods, thus confirming their robustness.

Multi-instrument STIX microflare study

Context. During its commissioning phase in 2020, the Spectrometer/Telescope for Imaging X-rays (STIX) on board the Solar Orbiter spacecraft observed 69 microflares. The two most significant events from this set (of GOES class B2 and B6) were observed on-disk from the spacecraft as well as from Earth and analysed in terms of the spatial, temporal, and spectral characteristics. Aims. We complement the observations from the STIX instrument with EUV imagery from SDO/AIA and GOES soft X-ray data by adding imaging and plasma diagnostics over different temperature ranges for a detailed microflare case study that is focussed on energy release and transport. Methods. We used data from the GOES for SXR plasma diagnostics and SDO/AIA for carrying out high-cadence EUV imaging and reconstruction of differential emission measure (DEM) maps of the thermal flare plasma. The reconstructed DEM profiles were used to study the temporal evolution of thermal flare plasma in the kernels and loops independently. We derived the time evolution of the flare plasma parameters (EM, T) and thermal energy from STIX, GOES, and AIA observations. In particular, we studied the STIX spectra to determine the nonthermal emission from accelerated electrons. Results. A spectral fitting of the STIX data shows clear nonthermal emission for both microflares studied here. For both events, the plasma temperature and EM derived from STIX and GOES as well as the reconstructed DEM maps differ in absolute values and timing, with AIA (which is sensitive to lower plasma temperatures) lagging behind. The deduced plasma parameters from either method roughly agree with the values in the literature for microflares as do the nonthermal fit parameters from STIX. This finding is corroborated by the Neupert effect exhibited between the time derivative of the GOES SXR emission and the STIX HXR profiles. For the B6 event, for which such an analysis was possible, the non-thermal energy deduced from STIX roughly coincides with the lower estimates of the thermal energy requirement deduced from the SXR and EUV emissions. Conclusions. The observed Neupert effects and impulsive and gradual phases indicate that both events covered in this study are consistent with the standard chromospheric evaporation flare scenario. For the B6 event on 7 June 2020, this interpretation is further supported by the temporal evolution seen in the DEM profiles of the flare ribbons and loops. For this event, we also find that accelerated electrons can roughly account for the required thermal energy. The 6 June 2020 event demonstrates that STIX can detect nonthermal emission for GOES class B2 events that is nonetheless smaller than the background rate level. We demonstrate for the first time how detailed multi-instrument studies of solar flares can be performed with STIX.

STIX X-ray microflare observations during the Solar Orbiter commissioning phase

Context. The Spectrometer/Telescope for Imaging X-rays (STIX) is the hard X-ray instrument onboard Solar Orbiter designed to observe solar flares over a broad range of flare sizes. Aims. We report the first STIX observations of solar microflares recorded during the instrument commissioning phase in order to investigate the STIX performance at its detection limit. Methods. STIX uses hard X-ray imaging spectroscopy in the range between 4–150 keV to diagnose the hottest flare plasma and related nonthermal electrons. This first result paper focuses on the temporal and spectral evolution of STIX microflares occuring in the Active Region (AR) AR12765 in June 2020, and compares the STIX measurements with Earth-orbiting observatories such as the X-ray Sensor of the Geostationary Operational Environmental Satellite (GOES/XRS), the Atmospheric Imaging Assembly of the Solar Dynamics Observatory, and the X-ray Telescope of the Hinode mission. Results. For the observed microflares of the GOES A and B class, the STIX peak time at lowest energies is located in the impulsive phase of the flares, well before the GOES peak time. Such a behavior can either be explained by the higher sensitivity of STIX to higher temperatures compared to GOES, or due to the existence of a nonthermal component reaching down to low energies. The interpretation is inconclusive due to limited counting statistics for all but the largest flare in our sample. For this largest flare, the low-energy peak time is clearly due to thermal emission, and the nonthermal component seen at higher energies occurs even earlier. This suggests that the classic thermal explanation might also be favored for the majority of the smaller flares. In combination with EUV and soft X-ray observations, STIX corroborates earlier findings that an isothermal assumption is of limited validity. Future diagnostic efforts should focus on multi-wavelength studies to derive differential emission measure distributions over a wide range of temperatures to accurately describe the energetics of solar flares. Conclusions. Commissioning observations confirm that STIX is working as designed. As a rule of thumb, STIX detects flares as small as the GOES A class. For flares above the GOES B class, detailed spectral and imaging analyses can be performed.

Visibility Interpolation in Solar Hard X-Ray Imaging: Application to RHESSI and STIX

Abstract Space telescopes for solar hard X-ray imaging provide observations made of sampled Fourier components of the incoming photon flux. The aim of this study is to design an image reconstruction method relying on enhanced visibility interpolation in the Fourier domain. The interpolation-based method is applied to synthetic visibilities generated by means of the simulation software implemented within the framework of the Spectrometer/Telescope for Imaging X-rays (STIX) mission on board Solar Orbiter. An application to experimental visibilities observed by the Reuven Ramaty High Energy Solar Spectroscopic Imager (RHESSI) is also considered. In order to interpolate these visibility data, we have utilized an approach based on Variably Scaled Kernels (VSKs), which are able to realize feature augmentation by exploiting prior information on the flaring source and which are used here, for the first time, in the context of inverse problems. When compared to an interpolation-based reconstruction algorithm previously introduced for RHESSI, VSKs offer significantly better performance, particularly in the case of STIX imaging, which is characterized by a notably sparse sampling of the Fourier domain. In the case of RHESSI data, this novel approach is particularly reliable when the flaring sources are either characterized by narrow, ribbon-like shapes or high-resolution detectors are utilized for observations. The use of VSKs for interpolating hard X-ray visibilities allows remarkable image reconstruction accuracy when the information on the flaring source is encoded by a small set of scattered Fourier data and when the visibility surface is affected by significant oscillations in the frequency domain.

The Spectrometer/Telescope for Imaging X-rays (STIX)

Aims. The Spectrometer Telescope for Imaging X-rays (STIX) on Solar Orbiter is a hard X-ray imaging spectrometer, which covers the energy range from 4 to 150 keV. STIX observes hard X-ray bremsstrahlung emissions from solar flares and therefore provides diagnostics of the hottest (⪆10 MK) flare plasma while quantifying the location, spectrum, and energy content of flare-accelerated nonthermal electrons. Methods. To accomplish this, STIX applies an indirect bigrid Fourier imaging technique using a set of tungsten grids (at pitches from 0.038 to 1 mm) in front of 32 coarsely pixelated CdTe detectors to provide information on angular scales from 7 to 180 arcsec with 1 keV energy resolution (at 6 keV). The imaging concept of STIX has intrinsically low telemetry and it is therefore well-suited to the limited resources available to the Solar Orbiter payload. To further reduce the downlinked data volume, STIX data are binned on board into 32 selectable energy bins and dynamically-adjusted time bins with a typical duration of 1 s during flares. Results. Through hard X-ray diagnostics, STIX provides critical information for understanding the acceleration of electrons at the Sun and their transport into interplanetary space and for determining the magnetic connection of Solar Orbiter back to the Sun. In this way, STIX serves to link Solar Orbiter’s remote and in-situ measurements.

The STIX Aspect System (SAS): The Optical Aspect System of the Spectrometer/Telescope for Imaging X-Rays (STIX) on Solar Orbiter

The Spectrometer/Telescope for Imaging X-rays (STIX) is a remote sensing instrument on Solar Orbiter that observes the hard X-ray bremsstrahlung emission of solar flares. This paper describes the STIX Aspect System (SAS), a subunit that measures the pointing of STIX relative to the Sun with a precision of pm 4'', which is required to accurately localize the reconstructed X-ray images on the Sun. The operating principle of the SAS is based on an optical lens that images the Sun onto a plate that is perforated by small apertures arranged in a cross-shaped configuration of four radial arms. The light passing through the apertures of each arm is detected by a photodiode. Variations of spacecraft pointing and of distance from the Sun cause the solar image to move over different apertures, leading to a modulation of the measured lightcurves. These signals are used by ground analysis to calculate the locations of the solar limb, and hence the pointing of the telescope.

MEM_GE: A New Maximum Entropy Method for Image Reconstruction from Solar X-Ray Visibilities

Abstract Maximum Entropy is an image reconstruction method conceived to image a sparsely occupied field of view, therefore it is particularly effective at achieving super-resolution effects. Although widely used in image deconvolution, this method has been formulated in radio astronomy for the analysis of observations in the spatial frequency domain, and an Interactive Data Language code has been implemented for image reconstruction from solar X-ray Fourier data. However, this code relies on a non-convex formulation of the constrained optimization problem addressed by the Maximum Entropy approach, and this sometimes results in unreliable reconstructions characterized by unphysical shrinking effects. This paper introduces a new approach to Maximum Entropy based on the constrained minimization of a convex functional. In the case of observations recorded by the Reuven Ramaty High Energy Solar Spectroscopic Imager (RHESSI), the resulting code provides the same super-resolution effects of the previous algorithm, while also working properly when that code produces unphysical reconstructions. We also obtain results via testing the algorithm with synthetic data simulating observations of the Spectrometer/Telescope for Imaging X-rays (STIX) in Solar Orbiter. The new code is available in the HESSI folder of the Solar SoftWare (SSW) tree.

Joint hard X-ray observations with ASO-S/HXI and SO/STIX

This paper discusses the potential of future joint hard X-ray solar flare observations between the Hard X-ray Imager (HXI) onboard the Advanced Space-based Solar Observatory (ASO-S) mission and the Spectrometer/Telescope for Imaging X-rays (STIX) on Solar Orbiter. The different viewing perspectives of the two telescopes relative to the Sun will allow us for the first time to systematically study non-thermal hard X-ray emissions stereoscopically. During the 4-years of the nominal mission of ASO-S, we expect to jointly observe about 160 flares above GOES M1 class to systematically study hard X-ray directivity. For about 16 partially limb-occulted STIX flares, we will have observations of the entire flare by HXI. Such observations will enable us to simultaneously study the all-important coronal hard X-ray sources, which are generally lost in the instrument’s individual imaging dynamic range, in combination with the chromospheric footpoint emissions. The two different detector systems used in the two telescopes make the relative calibration between the two instruments a key task that needs to be addressed before creditable science results can be published. If an accurate inter-calibration can be achieved using jointly observed flares on the disk, observations with HXI and STIX will provide new and essential key diagnostics for solar flare physics.

Count-based imaging model for the Spectrometer/Telescope for Imaging X-rays (STIX) in Solar Orbiter

The Spectrometer/Telescope for Imaging X-rays (STIX) will study solar flares across the hard X-ray window provided by the Solar Orbiter cluster. Similarly to the Reuven Ramaty High Energy Solar Spectroscopic Imager (RHESSI), STIX is a visibility-based imaging instrument that will require Fourier-based image reconstruction methods. However, in this paper we show that as for RHESSI, count-based imaging is also possible for STIX. Specifically, we introduce and illustrate a mathematical model that mimics the STIX data formation process as a projection from the incoming photon flux into a vector consisting of 120 count components. Then we test the reliability of expectation maximization for image reconstruction in the case of several simulated configurations that are typical of flare morphology.

The expected fluxes observed by STIX during low solar activity

The Spectrometer Telescope for Imaging X-rays (STIX) is one of the instruments installed onboard Solar Orbiter mission which will be launched in February 2020. After 1.5 years of cruise phase it will start to gather scientific data from the orbit with perihelion distance about 0.28 au. It means that STIX will operate also during the next solar minimum. In the paper we estimate flux measured by the instrument during periods of low solar activity. For this purpose we used solar observations which were recorded by the Solar Photometer in X-rays (SphinX) during the last minimum of solar activity. The estimation was obtained for instruments overlapping energy range from 4 to 15 keV. Presented results indicate that STIX instrument will provide efficient imaging the solar emission even during low level of solar activity (B1 GOES class).