Emission Spectra Research Articles

Ecosystem service value and ecological compensation in Qilian Mountain National Park: Implications for ecological conservation strategies

Qilian Mountain National Park (QMNP) is a critical ecological barrier and water conservation area in northwestern China. Its diverse ecosystems provide significant ecosystem services, yet the valuation of these services and their dynamic responses to land use/cover (LULC) changes and ecological protection measures require detailed investigation. This study employs an improved equivalent factor method, tailored to the specific ecosystem types and LULC patterns of QMNP, to evaluate the ecosystem service value (ESV) across different LULC types. Using an elasticity analysis model, the sensitivity of ESV to LULC changes from 1990 to 2022 was quantitatively assessed. The results indicate that the ESV of QMNP increased from 46.13 billion RMB to 50.97 billion RMB between 1990 and 2022, mostly due to the growth of grassland and forest areas. The primary route for increasing the region’s ESV is the conversion of desert to grassland, and this should be a major area of emphasis for next ecological conservation initiatives. Regulating services form the core of the ESV in QMNP, with climate and hydrological regulation contributing significantly to the overall ESV. Maintaining the stability of forest, wetland, and water body areas is crucial for sustaining the total ESV of QMNP. Through the application of carbon emission coefficients and ESV methods, the average range for long-term ecological compensation standards in QMNP is expected to be between 3.78 billion RMB and 28.28 billion RMB annually. Additionally, we explore the impacts of ongoing ecological protection mechanisms on enhancing ESV. There is a pressing need to formulate integrated policy frameworks that balance ecological conservation with sustainable economic development. The study also highlights the necessity of strengthening the protection and foundational research of grasslands and water bodies to enhance the ESV of QMNP. These insights serve as a foundation for potential planning and management strategies in QMNP, aiming to maintain and enhance its ecosystem functions and services, thereby contributing to broader regional and global ecological stability.

The dark art of light curing in dentistry

ObjectiveThis study was designed to show that the commonly reported irradiance values that are quoted in most publications inadequately describe the light output from light curing units (LCUs). MethodsThe total spectral radiant power (mW) output from 12 contemporary LCUs was measured with a fiberoptic spectroradiometer and a calibrated integrating sphere. Five recordings were taken for each LCU and exposure mode. In addition, the irradiances (mW/cm²) delivered at 0-mm, 5-mm and 10-mm distances were recorded through a 6-mm diameter aperture and the radiant exposures (J/cm²) from the LCUs were calculated. Light beam profiles from the LCUs were recorded using a beam profiler, and the images were overlaid on a molar tooth to simulate a clinical setting. Data were analyzed using ANOVA followed by Tukey post-hoc test (α = 0.05). ResultsThe mean power outputs from the LCUs ranged from 380 to 2472 mW (p < 0.0001). The highest irradiance was recorded from the Cicada CV 215-G7 (3091 mW/cm² in its highest mode) and the lowest from the Radii Cal CX (731 mW/cm²). The emission spectra differed, even among the multi-peak and single-peak LCUs. Radiant exposures from the entire light tip ranged from 18.3 J/cm², Radii Cal CX, in its standard 25 s exposure mode to 3.9 J/cm² from the Monet Laser in a 3 s exposure setting. Half (50 %) of the measured irradiance values from the LCUs differed from the manufacturers' value by more than 10 %. There were significant differences in the impact of distance from the tip. The beam profiles visually highlighted the varying effects of distance from the LCU tip among different units. ConclusionThere were significant differences in the emission spectra, power outputs, tip diameters, irradiances, radiant exposures, and the effect distance from the light tips. These differences underline the importance of manufacturers and researchers correctly measuring and reporting the output from the LCU to ensure that research is reproducible and that patients receive acceptable dental restorations. Clinical SignificanceThis article alerts clinicians, researchers and journal editors that providing only the tip irradiance (radiant exitance) value from the LCU is no longer sufficient. Manufacturers and researchers should include information on the spectral radiant power, emission spectrum, tip diameters, and also the effect of distance on the irradiance and radiant exposure, beam profiles and tooth access information when describing an LCU.

Triphenylamine-Based Solid-State Emissive Fluorene Derivative with Aggregation-Induced Emission Enhancement Characteristics

Aggregation-induced emission (AIE) has garnered considerable attention in recent years. Understanding the mechanisms underlying AIE phenomena is crucial. Here, we present the design and synthesis of a novel fluorene derivative (4) based on triphenylamine, which exhibits typical AIE properties. The structure of it was totally characterized using FT-IR, MALDI-TOF mass analysis, elemental analysis, 1H, and 13C NMR spectroscopy. It displayed strong solid-state emission with diverse fluorescence characteristics. The AIE property of the compound was systematically studied using photoluminescence spectroscopy, revealing a distinct yellow light-emitting phenomenon. The solid-state luminescence showed a red shift of 148 nm compared to its luminescence in dilute dimethylformamide (DMF) solutions. Moreover, photophysical characteristics, including absorption and emission spectra, as well as fluorescence lifetime, were examined using UV–vis absorption and fluorescence emission spectroscopy. Compound (4) exhibited superior photosensitization abilities in both solid and solution states, with a notably enhanced effect observed in the solid state compared to the solution state.

Spectral analysis and emission properties of Ho3+:YLF in the visible-near infrared band

Spectral analysis and emission properties of Ho3+:YLF in the visible-near infrared band

Exploring the potential of epoxy nanocomposites infused with Alq3 for UV sensing applications

This research explores the morphological, molecular, and photoluminescent properties of epoxy-based nanocomposite sheets containing Alq3, as well as their response to UV irradiation. By analyzing the surface morphology via SEM, it is observed that the pristine epoxy sheets exhibit uniformity, while the nanocomposites display dispersed nanoparticles, influenced by the concentrations of dopants. Raman spectroscopy reveals changes in molecular structures and vibrational modes, with broadened peaks indicating potential interactions between the additives and epoxy matrix. The photoluminescence (PL) emission spectra show enhancements in intensity and shifts in peak wavelengths toward the green emission region, significantly influenced by the dopants. UV irradiation causes changes in both Raman and PL signals, with varying effects on different nanocomposite configurations. Linear regression analysis demonstrates strong correlations between signal changes and irradiation time, particularly pronounced in epoxy/Alq3 nanocomposite sheets, with marginal errors from Raman and PL signal-induced changes of 5% and 2%, respectively. Additionally, stability and reproducibility assessments reveal consistent signal trends over prolonged UV exposure and high reproducibility with minimal error of less than 5%. Overall, these epoxy nanocomposite sheets display promising results for UV sensing applications due to their sensitivity, linearity, stability, and reproducibility.

Mn-doped CsPbCl3 perovskite quantum dots: A dual-function probe for copper detection and temperature sensing

The low photoluminescence quantum yield (PLQY) of CsPbCl3 perovskite quantum dots (PQDs) poses a significant challenge to their application as ion detection probes. To address this issue, we enhanced the PLQY of CsPbCl3 PQDs through Mn doping. These enhanced PQDs were then employed as probes for the highly sensitive detection of Cu2+ ions and temperature. CsPbCl3:Mn PQDs with varying Mn/Pb ratios were synthesized via hot injection. The Mn doping introduced an emission band near 600 nm, with intensity increasing alongside doping concentration. At an Mn/Pb ratio of 2.0, the PLQY was enhanced nearly tenfold, from 5.46 % for undoped CsPbCl3 to 52.48 % for CsPbCl3:Mn. CsPbCl3:Mn PQDs with the highest PLQY were employed as luminescent probes, utilizing the fluorescence intensity ratio (FIR) technique for copper detection and temperature sensing. The experimental results demonstrated a linear relationship between the FIR and Cu2+ concentration over the range of 22.12 nM to 1600 nM, with 22.12 nM being the calculated limit of detection. Analysis of the emission spectra and fluorescence lifetimes at varying Cu2+ concentrations revealed that electron transfer from CsPbCl3 to Cu2+ induced fluorescence quenching. CsPbCl3:Mn exhibits a high relative sensitivity of 15.89 % K−1 at 298 K, along with excellent reversibility. These findings highlight the potential application of CsPbCl3:Mn PQDs in both temperature sensing and the analysis of wear metals in engine lubricating oils.

Ozone production in nanosecond pulsed dielectric barrier discharge in synthetic air: the Effect of Pulse Width

This work investigates the effect of pulse width on the characteristics of electrical discharge, optical emission spectra and ozone production in a water electrode DBD using a modulable nanosecond pulsed power supply. Results show that the increase of pulse width tpw slightly increases the spectral intensity and the rotational temperature Trot, with a typical Trot of 299 ± 5 K at an applied peak voltage Vp of 18.6 kV and a tpw of 400 ns. The electronic excitation temperature Texc increases linearly with Vp and gradually with tpw, while the electron density ne shows a non-linear relationship with tpw. Results also show that an increase in tpw slightly increases the energy density. At low energy densities (SIE < 50 J/L), increasing tpw can improve ozone generation efficiency, reaching a maximum of 99.64 ± 0.87 g/kWh at 33.60 ± 1.53 J/L at a tpw of 900 ns. This investigation provides substantial insight into the nanosecond pulsed ozone production.

Expanding the Molecular Spectrum of Carcinoma Ex Pleomorphic Adenoma: An Analysis of 84 Cases With a Novel HMGA2::LINC02389 Fusion.

Carcinoma ex pleomorphic adenoma (CXPA) is an aggressive epithelial and/or myoepithelial neoplasm that arises in association with a pleomorphic adenoma (PA). Its etiopathogenesis remains poorly understood, but it is believed that the development of this tumor is due to the accumulation of genetic, protein, metabolic, and epigenetic alterations in a PA. A retrospective review of the Salivary Gland Tumor Registry in Pilsen yielded 84 CXPA, namely 25/84 salivary duct carcinoma (SDC), 15/84 myoepithelial carcinoma (MC), 1/84 epithelial-myoepithelial carcinoma (EMC), and 1/84 adenoid cystic carcinoma (AdCC). All 84 CXPA cases were analyzed by next-generation sequencing (NGS) and/or fluorescence in situ hybridization (FISH). Forty-three tumors originally diagnosed as CXPA (43/84, 51.2%) showed some molecular alteration. Fusion transcripts were identified in 12/16 (75%) CXPA, including LIFR::PLAG1, CTNNB1::PLAG1, FGFR1::PLAG1, and a novel fusion, HMGA2::LINC02389. Most of the fusions were confirmed by FISH using PLAG1 (6/11) and HMGA2 (1/1) gene break probes. Split signals indicating gene break were identified by FISH for PLAG1 (12/17), HMGA2 (3/4), EWSR1 (7/22), and MYB (2/7). Concerning pathogenic mutations, only CXPA with epithelial differentiation (SDC) presented these alterations, including HRAS mutation (2/4), TP53 (1/4), PTEN (1/4), and ATK1 (1/4). In addition, amplifications in ERBB2 (17/35), MDM2 (1/4), and EWSR1 (1/7) were detected. A novel finding was the discovery of an HMGA2::LINC02389 fusion in 1 patient with EMC ex-PA. The present results indicate that molecular profiling of CXPA with myoepithelial differentiation (MC) tends to reveal chromosomal fusion events, whereas CXPA with epithelial differentiation (SDC) tends to have a higher frequency of pathogenic mutations and gene amplifications.

High-resolution X-ray spectra of the compact binary supersoft X-ray source CAL 87

In this study we present an analysis of the archival X-ray data of the eclipsing supersoft X-ray binary CAL 87 observed with the Chandra Advanced CCD Imaging Spectrometer (ACIS) camera and Low Energy Transmission Grating (LETG) in 2001 August and with XMM-Newton in 2003 April. The high-resolution X-ray spectra are almost unchanged on the two different dates. The average unabsorbed X-ray luminosity during the exposure was 4.64 − 5.46 × 1036 ergs s−1 in 2001 and 4.54 − 4.82 × 1036 ergs s−1 in 2003, with prominent and redshifted emission lines, mostly of nitrogen, oxygen, iron, and argon, contributing to at least 30% of the X-ray flux. The continuum X-ray flux is at least an order of magnitude too low for a hot hydrogen-burning white dwarf (WD). However, the continuum flux is consistent with Thomson-scattering reflecting about 5% of the light of a hydrogen-burning WD with effective temperature of 800 000 K and a mass of ∼1.2 M⊙. It has been noted that a large Thomson-scattering corona explains the X-ray eclipse of CAL 87, in which the size of the eclipsed region is found to be on the order of a solar radius. The emission lines originate in an even more extended region beyond the eclipsed central X-ray source; the emission spectrum is very complex, with unusual line ratios.

The luminescent behaviors and J-O theory analysis of red phosphor Ca1-xGeO3:xEu3+

The luminescent material Eu3+-doped CaGeO3 has been synthesized using a high-temperature solid-state reaction technique. The crystal structure was analyzed using X-ray diffraction (XRD). The results showed that the samples belonged to the triclinic crystal system with the space group P1̅. The luminescent properties including photoluminescence excitation (PLE), Photoluminescence emission (PL) spectra, and lifetime, thermal stability, and diffuse reflectance spectroscopy (DRS) have been investigated. Under near-ultraviolet excitation at 390nm, the phosphor emits red light with the highest intensity around 611nm, which is dominated by the 5D0→7F2 electric dipole transitions. It indicates that Eu3+ is in the inversion center of the crystal. The concentration quenching occurs at about 6% doping from the concentration-dependent luminescence behavior. The energy transfer mechanism was analyzed to be mainly the energy transfer between neighboring ions. The thermal stability was 82.16% at 423K. The chromaticity coordinates are in the red area and the color purity approaches 99%. Furthermore, the J-O theoretical results are used to confirm the experimental result. It suggests that Ca1-xGeO3:xEu3+ is an effective red luminescent material for illumination and backlight display applications.

Structural and luminescence properties of Y2O3:Ho3+ phosphor: Potential applications in plant cultivation LEDs and thermoluminescent dosimetry

Current research on Y2O3:Ho3+ phosphors highlight their promising luminescence properties, but often lacks an environmentally friendly synthesis method and comprehensive analysis of their applications. In this study, we address these gaps by successfully synthesizing Y2O3:Ho3+ phosphors using a green synthesis route with varying concentrations of Ho3+. Our work provides detailed characterization of their photoluminescence (PL) and thermoluminescent (TL) properties. The PL excitation (PLE) spectra reveal a distinct peak at 439 nm, attributed to the 5I8→(5K5; 5G5) transition of Ho3+ions. Upon excitation at 439 nm, the emission spectra show a sharp emission peak around 660 nm from the 5F5→5I8 transition, with the 0.1 mol% Ho3+ phosphors exhibiting particularly strong red emission, indicating their suitability for indoor plant cultivation under LED lighting. Additionally, TL properties were evaluated after gamma-ray exposure, with the highest emission intensity at 0.1 mol% Ho3+ concentration. TL glow curves were analyzed for various radiation doses using the Computerized Glow Curve Deconvolution (CGCD) method, and TL trapping parameters were determined through Chen's peak shape and the Initial Rise methods. This work demonstrates significant potential for using these phosphors to enhance indoor plant growth and for applications in thermoluminescent dosimetry (TLD).

Quartz Clouds in the Dayside Atmosphere of the Quintessential Hot Jupiter HD 189733 b

Recent mid-infrared observations with JWST's Mid-Infrared Instrument Low Resolution Spectrometer (MIRI LRS) have resulted in the first direct detections of absorption features from silicate clouds in the transmission spectra of two transiting exoplanets, WASP-17 b and WASP-107 b. In this Letter, we measure the mid-infrared (5–12 μm) dayside emission spectrum of the benchmark hot Jupiter HD 189733 b with MIRI LRS by combining data from two secondary-eclipse observations. We confirm the previous detection of H2O absorption at 6.5 μm from Spitzer's Infrared Spectrograph (IRS) and additionally detect H2S as well as an absorption feature at 8.7 μm in both secondary-eclipse observations. The excess absorption at 8.7 μm can be explained by the presence of small (∼0.01 μm) grains of SiO2[s] in the uppermost layers of HD 189733 b’s dayside atmosphere. This is the first direct detection of silicate clouds in HD 189733 b’s atmosphere, and the first detection of a distinct absorption feature from silicate clouds on the dayside of any hot Jupiter. We find that models including SiO2[s] are preferred by 6–7σ over clear models and those with other potential cloud species. The high-altitude location of these silicate particles is best explained by formation in the hottest regions of HD 189733 b’s dayside atmosphere near the substellar point. We additionally find that HD 189733 b’s emission spectrum longward of 9 μm displays residual features not well captured by our current atmospheric models. When combined with other JWST observations of HD 189733 b’s transmission and emission spectra at shorter wavelengths, these observations will provide us with the most detailed picture to date of the atmospheric composition and cloud properties of this benchmark hot Jupiter.

Multicolor and multimode luminescent lanthanide-doped Cs2NaInCl6:Sb3+ from visible to near infrared for versatile applications

Double halide perovskites have shown admirable potential in promising optoelectronic applications due to simple synthesis, good stability and high structural tolerance. However, the poor optical properties caused by the parity-forbidden transitions posts a stringent limitation on their potential applications. Herein, we dope the lanthanide (Ln3+) ions with abundant energy levels into the Cs2NaInCl6:Sb3+ single crystals, which not only achieve multicolor visible emissions spectra from blue to red light, but also expand to the near infrared region from 800 to 1900 nm. In addition, the phosphors enable the multimode emissions with the up-conversion and down-conversion photoluminescence. Intriguingly, the excitation source, and the excitation light intensity also endow the multicolor emissions. Thus, combining with the multicolor and multimode luminescent properties, Cs2NaInCl6:Sb3+/Ln3+ could be applied to night vision imaging, substance detection, optical thermometry, white-light-emitting diodes (WLEDs) and anti-counterfeiting. The maximum value of relative temperature sensitivity reaches as high as 1.207 % K−1, which is relatively higher than those of most metal halide perovskites. Moreover, the single-source WLED displays Commission Internationale de L'Eclairage color coordinates (0.32, 0.31), a correlated color temperature of 6673 K, and color rendering index of 81.7. These results demonstrate the potential applications in the multifunctional photoelectric applications.

Highly energy-efficient degradation of simulated dye wastewater by array type underwater bubble discharge plasma: Key factors identification and degradation pathways

The extensive use of dyes presents a significant safety concern for the reuse of water resources, highlighting the critical need for a rapid and efficient degradation method for dye mixtures in wastewater. This study introduces a degradation system based on an array type underwater bubble discharge plasma specifically designed to treat a dye mixture wastewater containing methylene blue (MB) and methyl violet 2B (MV2B). Analysis of the optical and electrical characteristics reveals that the device experiences minimal temperature increase, with the highest intensity of the band associated with N2 in the emission spectra, and discharges occurring predominantly during the rising and falling edges of a pulse cycle. Experimental results demonstrate that the most effective degradation efficiencies (MB = 94.83%, MV2B = 93.48%) are achieved at an initial dye concentration of 50 mg/L, a power supply frequency of 6 kHz, an air flow rate of 2.5 SLM and an initial electrical conductivity of 50 μS/cm. The degradation of dyes is primarily attributed to the demethylation process of O3(aq) and other species. Toxicity analysis indicates that the plasma degradation process significantly reduces the toxicity of the intermediate products of dyes. This study not only presents a novel approach for treating high concentration mixed dye wastewater, but also provides valuable insights for future research in this area.

Extreme ultraviolet emission spectra of a low-pressure microwave neon discharge

In this paper, in order to reveal the discharge mechanism and optimize the extreme ultraviolet (EUV) emission lines in intensity of a low-pressure microwave (MW) neon discharge, the EUV neon spectra is carefully characterized under varied MW powers and neon pressures. The corona balance is verified to be valid for the neon upper levels of the measured EUV lines, and the electron temperature T e is derived by the modified Boltzmann plot method and the line-ratio method. Both results of the methods present a decreasing trend of T e with growing neon pressure, but the values in a range of 1.87-5.77 eV deduced by the former method is in general lower than that calculated by the latter with a range of 2.23–5.58 eV in similar neon pressure range. It is also found that the increase of MW power from 90 to 135 W only leads to a slight increasing of T e . A global model is applied to estimate the electron density n e , which is found to lie in the order of magnitude of 1010 cm−3. The dependence of the plasma parameters on different discharge conditions is analysed in detail, which in turn provide a favourable basis for further optimization of the promising low-pressure MW discharge radiation source.

Enhanced hypersensitive (5D0→7F2) transition characteristics of Eu3+ doped β-Ga2O3 microrods

Exploring and realizing the luminescence characteristics of rare earth metal (RE) ions doped gallium oxide (Ga2O3) is crucial for developing optoelectronic device applications. The current research used the solid-state reaction approach to synthesize Ga2O3 microrods doped with various europium (Eu3+) concentrations (0.1, 0.2, 0.3, 0.5, 0.75, and 1 mol). X-ray diffraction (XRD) and Raman spectral analyses confirm the monoclinic structure of β-Ga2O3. The intensity of the Raman phonon modes decreased and a peak shift was observed for Eu:β-Ga2O3. The electron microscopy (SEM, TEM) images depicted a nearly uniform distribution of microrods for undoped and Eu:β-Ga2O3 samples. The interplanar distance (d = 0.290 nm, 0.561 nm, and 0.433 nm), from HR-TEM images, corresponding to (0 0 4), (1 0 0), and (1 0 2) crystallographic orientations confirm the monoclinic structure of β-Ga2O3. The elemental mapping images showed a nearly homogeneous Ga, O, and Eu distribution. The UV–visible diffuse reflectance spectroscopy (UV-DRS) showed a notable reduction in the bandgap as the Eu3+ concentration increased. The emission spectra of Eu: β-Ga2O3 microrods showed a narrow red emission at 612 nm (5D0 → 7F2), which relates to the 5D0 → 7Fj (j = 0, 1, 2, 3) energy level arising from an intra-4f transition of Eu3+ ions upon 394 and 465 nm excitation. The red emission was found to increase with Eu content up to 0.5 mol.%. A quenching of emission due to the multipole–multipole interactions was obtained beyond 0.5 mol.% of Eu. The absolute quantum yield (η) calculated for Eu: β-Ga2O3 (0.5 mol.%) was 3.82 %. The luminescence decay curve using the bi-exponential fit and the average lifetime (τ) of the Eu: β-Ga2O3 (0.5 mol.%) was found to be ∼0.172 ms. CIE chromaticity and correlated color temperature analyses of Eu:β-Ga2O3 microrods yielded a red emission with a superior color purity (93 %). The obtained results suggest that Eu:β-Ga2O3 (0.5 wt.%) microrods could be one of the potential candidates for red light sources.

Elucidating the Photophysics and Nonlinear Optical Properties of a Novel Azo Prototype for Possible Photonic Applications: A Quantum Chemical Analysis.

The photophysics and nonlinear optical responses of a novel nitrothiazol-methoxyphenol molecule were investigated using density functional theory (DFT) and time-dependent density functional theory (TD-DFT) methods with the polarizable continuum model to take the solvent effect into account. Special attention is paid to the description of the lowest absorption band, characterized as a strong π → π* state in the visible region of the spectrum. The TD-DFT emission spectrum analysis reveals a significant Stokes shift of more than 120 nm for the π → π* state in gas phase condition. The results show a great influence of the solvent polarity on the nonlinear optical (NLO) response of the molecule. Specifically, the second harmonic generation hyperpolarizability β(-2ω; ω, ω) shows a large variation from gas to aqueous solvent (82 × 10-30 to 162 × 10-30 esu), exhibiting notably higher values than those reported for standard compounds such as urea (0.34 × 10-30 esu) and p-nitroaniline (6.42 × 10-30 esu). Furthermore, a two-photon absorption analysis indicates a large cross-section (δ2PA = 77 GM) with superior performance compared to several dyes. These results make the molecule quite interesting for nonlinear optics.

Host Engineering of Deep‐Blue‐Fluorescent Organic Light‐Emitting Diodes with High Operational Stability and Narrowband Emission

AbstractThe realization of highly operationally stable blue organic light‐emitting diodes (OLEDs) is a challenge in both academia and industry. This paper describes the development of anthracene–dibenzofuran host materials, 2‐(10‐(naphthalen‐1‐yl)anthracen‐9‐yl)naphtho[2,3‐b]benzofuran (Host 1) and 2‐(10‐([1,1′‐biphenyl]‐2‐yl)anthracen‐9‐yl)naphtho[2,3‐b]benzofuran (Host 2), namely for use in the emissive layer of an OLED stack. A multiple‐resonance thermally activated delayed serves as the blue fluorescence emitter and exhibits an initial luminance of 1000 cd m−2 and long operational stability (i.e., time to decay to 90% of initial luminance) of 249 h. Furthermore, a deep‐blue OLED with an optimized top‐emitting architecture with a high current efficiency of 154.3 cd A−1, is fabricated and calibrated to a Commission International de l’Éclairage y chromaticity coordinate of 0.048. Moreover, the emission spectrum of this OLED has a narrowband peak at 476 nm with a full width at half maximum (FWHM) of 16 nm. This work provides valuable insights into the design of anthracene‐based host materials and highlights the importance of host optimization in improving the operational stability of OLEDs.

Enhancing silicon spectral emission in LIBS using Tesla coil discharge

Abstract Laser-induced breakdown spectroscopy (LIBS) is a powerful technique for elemental analysis, offering rapid analysis, minimal sample preparation, wide elemental coverage, and portability. To enhance the detection sensitivity of LIBS, increasing the spectral emission intensity is crucial. This paper explores the use of Tesla coil (TC) discharge as an alternative to spark discharge in silicon LIBS. The study examines the influence of TC discharge on both time-integrated and time-resolved spectra, with and without TC discharge; the corresponding electron temperature and density are obtained. The results show that TC discharge significantly amplifies the spectral intensity, improving signal sensitivity in LIBS analysis. Specifically, in the laser energy range from 7.4 to 24.0 mJ, TC discharge increased the average spectral line intensities of Si (II) 385.60 nm and Si (I) 390.55 nm by factors of 8.4 and 5.1, respectively. Additionally, the average electron temperature and density were enhanced by approximately 3.2% and 4.2%, respectively, under TC discharge. The advantages of TC discharge include higher energy deposition, extended discharge duration, reduced electrode erosion, and enhanced safety. This research contributes to advancing LIBS technology and expanding its applications in various fields.

Adiabatic spectrum of radio emission of plasma clouds, emitted by the Sun during solar flares, and inhomogeneities of the spectrum of radio emission of clouds

It is known that so-called solar flares systematically occur in the area of sunspots. They are accompanied by radiation in almost all frequency ranges and sometimes by the emission of hot plasma. Observations on the RATAN-600 radio telescope have shown that the radio emission spectrum of plasma clouds heated to values of the order of 106K erupted from the solar flare region turned out to be adiabatic. The high correlation of the inhomogeneities of the radio emission spectra of active formation over a group of sunspots indicates the stable presence of recombination radio lines in the radiation of active formation. However, the radio emission spectra of hot plasma clouds ejected from the region of solar flares occurring in this group of spots do not show any correlation.