Catalytic Efficiency Research Articles

Copper-catalyzed plastic waste synthesized graphene nanosheets/polypyrrole nanocomposites for efficient thermoelectric applications

Presently, various catalysts have been reported for the synthesis of carbon nanomaterials from a variety of plastic waste, which needs to be removed at the end of the synthesis process by using chemical techniques and hence make the process more typical from the aspect of cost-benefit and circular economic aspects. Herewith, we report copper turnings as the cost-effective and greener catalytic templates for synthesizing highly conducting graphene nanosheets (GNs). The synthesis of the GNs from plastic waste was done as we previously reported in the steps of the pyrolytic process, where the copper turnings are used as catalytic templates in the present study. Because of the excellent catalytic efficiency towards breaking old carbon-carbon bonds and forming new carbon-carbon bonds, the copper turnings act as an excellent degradation catalyst and promote the growth of graphitic skeletons and, consequently, graphene nanosheets. The synthesized GNs showed a high conductivity of ∼ 1730 S/m. GNs thus synthesized is implemented for synthesizing GNs/polypyrrole nanocomposites, which is later investigated for the TE applications. The values of the Seebeck coefficient showed that the composite of GNs/polypyrrole performs as a p-type semiconductor. The TE figure of merit (ZT) for GNs/polypyrrole demonstrated good thermoelectric characteristics and showed a value of 3.75 × 10−6 at the temperature. Thus, the present method of synthesis of GNs showed a more convenient, industrial friendly technique for the production of plastic waste derived graphene nanosheets and its application for thermal energy conversion applications.

Ball milling of pyrite in air to significantly promote the Fenton reaction: A mechanistic study

Natural pyrite (FeS2) has been widely used as heterogenous Fenton catalyst due to the unique iron supplying and ferrous regeneration performance, however, natural pyrite has poor catalytic activity due to the low surface reactivity. Ball milling is commonly used to modify pyrite, but the mechanism has not been thoroughly studied. In our work, by optimizing the ball milling conditions, the catalytic efficiency of modified pyrite is increased by 60 times compared to natural pyrite, and the ball milled pyrite Fenton system was able to degrade dyes and a series of antibiotics within 30 min. Compared to ball milling in nitrogen and vacuum, ball milling in air increased the proportion of S2− and active iron sites on the surface of pyrite, which assisted and accelerated the regeneration of ferrous and enhanced the iron supplying performance. This work explored the mechanisms of ball milling to modify the properties of pyrite, reported a green and efficient ball milled pyrite Fenton system, and provided a new insight in regulating ball milling conditions for mechanochemical modification.

Photoelectrochemical response of tin iodide phosphide (SnIP) composites with MoSe2, MoS2, and h‐BN

For a future world fuelled by green energy it is invaluable to develop, test and maximise the catalytic efficiency of new effective water‐splitting materials. In this paper, we further explore the catalytic activity of double‐helical tin iodide phosphide (SnIP), as it features bandgaps in the ideal region for this process. We found that its photoelectrochemical response can be multiplied by forming composites of SnIP with selected 2D materials, focusing on hexagonal boron nitride and the transition metal dichalcogenides (TMDs) MoSe2 and MoS2. These nanocomposites were analysed with Powder‐X‐ray diffraction (P‐XRD), Raman, and UV/VIS bandgap determination. Their photo activity was assessed under simulated solar light through chrono amperometry and linear sweep voltammetry (CA, LSV). The high anisotropy of the involved materials enables efficient charge separation at the 1D/2D interfaces, increasing photoelectrochemical response four‐fold.

Insecticide binding mode analysis and biological effects of acetylcholinesterase target-site resistance mutations in Spodoptera frugiperda

It is urgent to solve insecticide resistance issues for fall armyworm (FAW), Spodoptera frugiperda. Some acetylcholinesterase-1 (Ace-1) mutations (A201S, G227A and F290V) have been identified as a cause of FAW resistance to organophosphates (OPs) and carbamates insecticides (CXs). However, the structural biological mechanisms on the relationship between the Ace-1 mutations and resistance to OPs and CXs still remain elusive. In this study, the A201S and F290V mutaions were found in eight fields populations of FAW except the G227A. Molecular docking revealed that the four Ace-1 proteins (Ace1-WT, Ace1-A201S, Ace1-G227A and Ace1-F290V) had the same binding modes and the same binding energies with acetylcholine (Ach), trichlorfon, chlorpyrifos, methomyl, carbaryl and chlorpyrifos oxide. The structural biological analysis revealed that the A201S mutations can enhance enzyme catalytic efficiency by introducing the hydroxyl group (-OH) from serine which performed the same function as the main-chain -NH and enhanced the interaction with the carboxy oxygen of acetylcholine (Ach), and the F290V mutation can effectively improve FAW resistance to insecticides by increasing the likelihood of Ach to enter the enzyme's active center for phenylalanine replaced by smaller valine under insecticide inhibition conditions. The bioassays and age-stage-specific life table analysis of FAW-SS and FAW-F290V populations revealed that F290V mutation effectively contributed to FAW resistance with a low fitness cost. This study provides a theoretical basis for future pest resistance management.

Development of cellulose-supported Pd-nanocatalyst for the heck coupling and michael addition reactions

The development of reusable, bio-resource based nanocatalysts with high turnover numbers (TONs) is essential for increased sustainability in the chemical sector. Herein, cellulose-supported bio-resourced poly(hydroxamic acid) is employed as a ligand in the synthesis of a palladium nanocomposite (PdNc-PHA) that exhibits higher TONs that previously reported similar systems for the Mizoroki-Heck and Michael addition reactions. The PdNc-PHA catalyst was characterised using Fourier transform infrared spectroscopy (FTIR), field-emission scanning electron microscopy (FE-SEM), energy dispersive X-ray spectrometry (EDX), high-resolution transmission electron microscopy (HR-TEM), X-ray photoelectron spectroscopy (XPS), and inductively coupled plasma-atomic emission spectroscopy (ICP-AES) analyses. Results showed that the PdNc-PHA catalyst exhibits excellent durability and high catalytic activity in the Mizoroki-Heck and Michael addition reactions, leading to high yields of the desired corresponding products. The Mizoroki-Heck reaction of aryl/heteroaryl chlorides with olefins resulted in the production of cross-coupled products, while the Michael addition reaction of phenol/thiophenol and aliphatic cyclic/alicyclic amines with a variety of olefins synthesised the corresponding O-, S-, and N-alkylated products. The recycle and reusability of the catalyst were tested using 4-nitrochlorobenzene and butyl acrylate. The results demonstrated that the catalyst maintained its catalytic activity effectively for up to ten cycles without any noticeable loss in performance. This research represents a promising strategy for efficient catalysis based on bio-waste as a wealth material.

Mn(I)-Catalyzed Site-Selective C-H Activation: Unlocking Access to 3-Arylated Succinimides from 2-Arylpyridines and Maleimides.

An efficient and cost-effective Mn(I)-catalyzed site-selective C-H activation of 2-arylpyridines with maleimides has been described. This approach facilitates the synthesis of 3-arylated succinimide derivatives with high site selectivity, chemoselectivity, catalytic efficiency, and outstanding tolerance to numerous functional groups. The practicality of this approach is further evidenced by its successful application in large-scale reactions and the conversion of the synthesized succinimide derivatives into other valuable compounds.

Continuous Flow Synthesis of Hexyl Laurate Using Immobilized Thermomyces Lanuginosus Lipase from Residual Babassu Mesocarp.

Brazil has one of the greatest biodiversities on the planet, where various crops play a strategic role in the country's economy. Among the highly appreciated biomasses is babassu, whose oil extraction generates residual babassu mesocarp (BM), which still needs new strategies for valorization. This work aimed to use BM as a support for the immobilization of Thermomyces lanuginosus lipase (TLL) in an 8.83 mL packed-bed reactor, followed by its application as a biocatalyst for the synthesis of hexyl laurate in an integrated process. Initially, the percolation of a solution containing 5 mg of TLL at 25 °C and flows ranging from 1.767 to 0.074 mL min-1 was investigated, where at the lowest flow rate tested (residence time of 2 h), it was possible to obtain an immobilized derivative with hydrolytic activity of 504.7 U g-1 and 31.7 % of recovered activity. Subsequent studies of treatment with n-hexane, as well as the effect of temperature on the immobilization process, were able to improve the activities of the final biocatalyst BM-TLLF, achieving a final hydrolysis activity of 7023 U g-1 and esterification activity of 430 U ⋅ g-1 against 142 U g-1 and 113.5 U g-1 respectively presented by the commercial TLIM biocatalyst. Desorption studies showed that the TL IM has 18 mg of protein per gram of support, compared to 4.92 mg presented by BM-TLL. Both biocatalysts were applied to synthesize hexyl laurate, achieving 98 % conversion at 40 °C within 2 h. Notably, BM-TLLF displayed exceptional recyclability, maintaining catalytic efficiency over 12 cycles. This reflects a productivity of 180 mg of product ⋅ h-1 U-1 of the enzyme, surpassing 46 mg h-1 U-1 obtained for TLIM. These results demonstrate the efficacy of continuous flow technology in creating a competitive and integrated process offering an exciting alternative for the valorization of residual lignocellulosic biomass.

Amino-Alkyl Group Dual-Functional Modification Synergistically Regulated Lipase-Carrier Interactions and Enhanced Phytosterol Ester Synthesis Efficiency.

Precisely controlling enzyme conformation to enhance catalytic performance is a highly sought-after yet challenging goal in the immobilization of biocatalysts. Excessively strong enzyme-carrier interactions can restrict enzyme dynamics and reduce catalytic efficiency, while excessively weak interactions may lead to enzyme leakage, thereby reducing reusability. In this study, we developed a novel strategy to finely regulate the interaction between the carrier and the enzyme through the adjustment of the ratio of amino and octadecyl functional groups. The expressed activity of the novel immobilized lipase, CRL@AOMR, was 1.32- and 2.34-fold higher than that of the monofunctional macroporous resin. Moreover, the synthesis of various phytosterol esters in solvent-free systems was conducted as a model reaction to investigate the utilization of CRL@AOMR in different reactions. Under optimized conditions, an impressive yield of 96.1% for phytosterol oleate was achieved and a yield of 76.2% was maintained even after six cycles of utilization (288 h). This study demonstrates the potential feasibility of developing immobilization strategies via dual modification of amino and alkyl groups, which is a potential general strategy for other enzymes with surface lysine.

Spirophosphine-Catalyzed Enantioselective [3 + 2] Cycloaddition of Allenoates and Unsaturated α-Ketimine Esters.

A novel chiral spiro-monophosphine, OUC-Phos, was synthesized and utilized for the first time in the asymmetric Lu's [3 + 2] cycloaddition reaction of β,γ-unsaturated α-ketimine ester with allenoate. OUC-Phos, featuring a 3,3'-diphenyl-modified spirobiindane skeleton, demonstrated exceptional catalytic efficiency in the [3 + 2] cycloaddition to achieve high yields, enantioselectivities, and diastereoselectivities for the targeted products. The broad substrate scope encompassing diverse functional groups demonstrated the versatility of this methodology. Furthermore, the reaction was successfully scaled up, and the products were easily converted into their corresponding functionalized derivatives.

Green Synthesis of New Derivatives of Iminothiazole Using Cefixime and Removing Organic Pollutants from Aqueous Environment by Employing Cu@KF/Clinoptilolite NPs.

In this research, multicomponent reactions of cefixime, isothiocyanates, and alkyl bromides were carried out for the synthesis of new iminothiazole derivatives with high yields in water as the solvent at room temperature in the presence of catalytic amounts of Cu@KF/CP NPs as catalysts. Also, the ability of Cu@KF/Clinoptilolite nanoparticles (NPs) to adsorb and remove 4-NP and cefixime from water was investigated. The Cu@KF/Clinoptilolite nanoparticles were synthesized by employing a water extract of Petasites hybridus rhizomes. For this experiment, all of the components obtained from Fluka and Merck were subjected to further purification. The antibiotic used in this investigation, cefixime, was obtained from a pharmaceutical facility situated in Sari, Mazandaran, Iran. The antibiotic factory is located in Sari City, Iran. All solutions were prepared using distilled water. The shape of Cu@KF/CP nanoparticles was analyzed using images obtained from a Holland Philips XL30 scanning electron microscope. An analysis was performed on the crystalline structure of Cu@KF/CP nanoparticles (NPs), and a room temperature X-ray diffraction (XRD) examination was carried out utilizing a Holland Philips Xpert X-ray powder diffractometer. The X-ray diffraction (XRD) examination was conducted using CuK radiation, which has a wavelength of 0.15406 nm. The analysis covered a 2ε angle range from 20 to 80°. The nanostructures that were produced were chemically analyzed using X-ray energy dispersive spectroscopy (EDS) with an S3700N equipment. The morphology and dimensions of Cu@KF/CP nanoparticles were characterized using a Philips EM208 transmission electron microscope operated at an acceleration voltage of 90 kV. The primary objective of this study was to develop a sustainable approach for producing new iminothiazole derivatives 4. This was achieved using a highly efficient three-component reaction combining cefixime 1, isothiocyanates 2, and alkyl bromides 3. The reaction was carried out in water at ambient temperature, using Cu@KF/CP NPs as a highly effective catalyst, leading to excellent yields. Moreover, the study findings showed that the synthesized compounds demonstrated a significant antioxidant activity compared to conventional antioxidants. The antibacterial efficacy of the synthesized compounds was evaluated against both Gram-positive and Gram-negative bacteria. Furthermore, Cu@KF/CP nanoparticles were utilized to adsorb CFX and 4-NP from water-based solutions. This study showcases the effective synthesis of innovative iminothiazole derivatives through the use of multicomponent reactions, involving the combination of cefixime, isothiocyanates, and alkyl bromides. The reactions were conducted in a water-based solvent. The reactions were carried out at room temperature, utilizing Cu@KF/CP NPs as catalysts. The Cu@KF/CP nanoparticles, a newly developed heterogeneous nanocatalyst, were synthesized and evaluated utilizing X-ray diffraction (XRD), fieldemission scanning electron microscopy (FESEM), energy-dispersive X-ray spectroscopy (EDX), and transmission electron microscopy (TEM) research techniques. Cu@KF/CP nanoparticles are utilized to adsorb CFX and 4-NP from water-based solutions. The objects were manufactured using a straightforward and uncomplicated approach. The BET surface area of Cu@KF/CP NPs was measured to be 201.8 m2/g. The experimental equilibrium data was evaluated by applying the isotherms of the Langmuir, Freundlich, Dubinin-Radushkevich, and Redlich-Peterson models. Additionally, we examined the catalytic efficiency of Cu@KF/CP nanoparticles (NPs) in reducing various colors in water.

Increasing Vitamin K2 Synthesis in Bacillus subtilis by Controlling the Expression of MenD and Stabilizing MenA.

As an indispensable member of the family of lipid vitamins, vitamin K2 (MK-7) plays an important role in blood coagulation, cardiovascular health, and kidney health. Microbial fermentation is favored due to its high utilization rate of raw materials, simple operation, and moderate conditions. However, the biosynthesis pathway of vitamin K2 in microorganisms is highly complex, which hinders its industrial production in microbial cell factories. One of the major challenges is the stable expression and deregulation of key enzymes in the vitamin K2 biosynthesis pathway, which remains unclear and has undergone little investigation. In this study, 2-succinyl-5-enolpyruvyl-6-hydroxy-3-cyclohexene-1-carboxylic-acid synthase (MenD) and 1,4-dihydroxy-2-naphthoate polyprenyltransferase (MenA) were identified as pivotal enzymes in the biosynthesis of vitamin K2. To investigate the catalytic efficiency of MenD in the biosynthesis pathway of vitamin K2, structure-based mutation design and site-directed mutagenesis were performed. Three mutation sites were identified in MenD: A115Y, R96 M, and R323M, which improve the expression level and protein stability. Meanwhile, the MenA mutant T290M, which exhibits improved protein stability, was obtained by modifying its hydrophobic stacking structure. Finally, an engineered strain noted ZQ13 that combinatorially overexpressed MenD (A115Y) and MenA (T290M) mutants was constructed and achieved 338.37 mg/L vitamin K2 production in a 3-L fermenter.

Energy‐Saving Hydrogen Production from Methanol Electrocatalysis Catalyzed by Molybdenum Phosphide/Nitrogen‐Doped Carbon Polyhedrons Supported Pt Nanoparticles

Comprehensive SummaryImproving the catalytic efficiency and anti‐poisoning ability of Pt‐based catalysts is very critical in methanol electrolysis technology for high‐purity hydrogen generation. Herein, the nitrogen‐doped carbon polyhedrons‐encapsulated MoP (MoP@NC) supported Pt nanoparticles were demonstrated to be effective for methanol electrolysis resulting from the combined advantages. The nitrogen‐doped carbon polyhedrons not only greatly enhanced the conductivity but also effectively prevented the aggregation of MoP to offer Pt anchoring sites. The electronic structure modification of Pt from their interaction reduced the adsorption energy of CO*, resulting in good CO‐poisoning resistance and accelerated reaction kinetics. Specifically, Pt‐MoP@NC exhibited the highest peak current density of 106.4 mA·cm–2 for methanol oxidation and a lower overpotential of 28 mV at 10 mA·cm–2 for hydrogen evolution. Energy‐saving hydrogen production from methanol electrolysis was demonstrated in the two‐electrode systems assembled by Pt‐MoP@NC which required a low cell voltage of 0.65 V to reach a kinetic current density of 10 mA·cm–2 on the glass carbon system, about 1.02 V less than that of water electrolysis.

Small Molecule Activation at the acriPNP Pincer-Supported Nickel Sites.

ConspectusNickel pincer systems have recently attracted much attention for applications in various organometallic reactions and catalysis involving small molecule activation. Their exploration is in part motivated by the presence of nickel in natural systems for efficient catalysis. Among such systems, the nickel-containing metalloenzyme carbon monoxide dehydrogenase (CODH) efficiently and reversibly converts CO2 to CO at its active site. The generated CO moves through a channel from the CODH active site and is transported to a dinuclear nickel site of acetyl-coenzyme A synthase (ACS), which catalyzes organometallic C-S and C-C bond forming reactions. An analogous C-S bond activation process is also mediated by the nickel containing enzyme methyl-coenzyme M reductase (MCR). The nickel centers in these systems feature sulfur- and nitrogen-rich environments, and in the particular case of lactate racemase, an organometallic nickel pincer motif revealing a Ni-C bond is observed. These bioinorganic systems inspired the development of several nickel pincer scaffolds not only to mimic enzyme active sites and their reactivity but also to further extend low-valent organonickel chemistry. In this Account, we detail our continuing efforts in the chemistry of nickel complexes supported by acridane-based PNP pincer ligands focusing on our long-standing interest in biomimetic small molecule activation. We have employed a series of diphosphinoamide pincer ligands to prepare various nickel(II/I/0) complexes and to study the conversion of C1 chemicals such as CO and CO2 to value-added products. In the transformation of C1 chemicals, the key C-O bond cleavage and C-E bond (E = C, N, O, or S, etc.) formation steps typically require overcoming high activation barriers. Interestingly, enzymatic systems overcome such difficulties for C1 conversion and operate efficiently under ambient conditions with the use of nickel organometallic chemistry. Furthermore, we have extended our efforts to the conversion of NOx anions to NO via the sequential deoxygenation by nickel mediated carbonylation, which was applied to catalytic C-N coupling to produce industrially important organonitrogen compound oximes as a strategy for NOx conversion and utilization (NCU). Notably, the rigidified acriPNP pincer backbone that enforces a planar geometry at nickel was found to be an important factor for diversifying organometallic transformations including (a) homolysis of various σ-bonds mediated by T-shaped nickel(I) metalloradical species, (b) C-H bond activation mediated by a nickel(0) dinitrogen species, (c) selective CO2 reactivity of nickel(0)-CO species, (d) C-C bond formation at low-valent nickel(I or 0)-CO sites with iodoalkanes, and (e) catalytic deoxygenation of NOx anions and subsequent C-N coupling of a nickel-NO species with alkyl halides for oxime production. Broadly, our results highlight the importance of molecular design and the rich chemistry of organonickel species for diverse small molecule transformations.

Magnetically separable Bi2O2CO3/MIL-101(Fe)/CoFe2O4 nanostructured catalysts for heterogeneous reductive remediation of nitrophenols and organic dyes

A new magnetically separable nanocomposite, Bi2O2CO3/MIL-101(Fe)/CoFe2O4, was successfully synthesized through a hydrothermal method. The composite was characterized through various analytical techniques. The nanocomposite demonstrated good catalytic efficiency in reducing nitroaromatic compounds and organic dyes by using NaBH4 reducing agent in aqueous solutions at room temperature. The apparent rate constant (kapp) values for 4-nitrophenol, 2-nitrophenol, 2-nitroaniline, and 4-nitroaniline were recorded at 0.457, 0.253, 1.52, and 0.564 min⁻¹, respectively, achieving complete conversion in just 2 to 9 min. Under similar conditions, methylene blue, methyl orange, rhodamine B, congo red, and crystal violet organic dyes were reduced to 98–100 % within 4 to 20 min, with kapp values ranging from 0.157 to 0.885 min⁻¹. Furthermore, the influence of catalyst dosage, NaBH4 concentration, and substrate concentration on the reduction process was examined. Importantly, the nanocomposite can be recovered using an external magnet and reused over four consecutive cycles without a significant reduction in catalytic efficiency.

Enhanced synergistic catalysis of bisphenol A in river water using an anti-aging photocatalytic membrane

Bisphenol A (BPA), as an endocrine disruptor, poses a potential threat to ecosystems and human health in aquatic environments. Membrane catalytic systems can accelerate the degradation of BPA and facilitate its conversion into harmless compounds. Nevertheless, the complex nature of the water environments and the limited stability of catalysts often result in challenges such as catalyst aging and deactivation. Herein, an anti-aging multifunctional AgFeO2 catalytic material with electron transfer membrane support was prepared for synergistic catalysis of low-energy LED light (12 W) excitation and peroxydisulfate (PDS) activation. The anti-aging photocatalytic membrane completely degraded 10 ppm of BPA within 30 min, and did not show significant aging after the long-term synergistic catalytic process. In addition, actual river water was employed to assess the aging process and catalytic efficiency in a practical environment. A 60.79 cm2 photocatalytic membrane completely purified 10 L of BPA polluted river water, while the total organic carbon content decreased by 50 %. This was mainly due to the synergistic catalytic effect of the membrane, which boosted photoelectron transfer through electron transfer shortcuts, thereby enhancing persulfate activation. Overall, the multifunctional membrane provides an effective strategy for achieving a long-lasting catalytic effect and controlling photocatalyst aging in practice.

High-Entropy Ag-Ru-based Electrocatalysts with Dual-Active-Center for Highly Stable Ultra-Low-Temperature Zinc-Air Batteries.

The development of advanced bifunctional catalysts for oxygen evolution reaction (OER) and oxygen reduction reaction (ORR) is significant for rechargeable zinc-air batteries (ZABs). Herein, a unique dual active center alloying strategy is proposed to achieve the efficient bifunctional oxygen catalysis, and the high entropy effect is further exploited to modulate the structure and performance of the catalysts. The MOF-assisted pyrolysis-replacement-alloying method was employed to construct the CoCuFeAgRu high-entropy alloy (HEA), which are uniformly anchored in porous nitrogen-doped carbon nanosheets. Notably, the obtained HEA catalyst exhibits excellent catalytic performance for both ORR and OER, and a peak power density of 136. 53 mW cm-2 and an energy density of 987.9 mAh gZn-1, surpassing the most of the previously reported bifunctional oxygen electrocatalysts. Moreover, the assembled flexible rechargeable ZAB enables excellent performance even at the ultralow temperature of -40°C, with an energy density of 601.6 mAh gZn-1 and remarkable cycling stability up to 1,650 hours. Combined experimental and theoretical calculation results reveal that the excellent bifunctional catalytic activity of the HEA catalyst originated from the synergistic effect of the Ag and Ru dual active centers, and the optimization of the electronic structure by alloying effect.

High‐Entropy Ag‐Ru‐based Electrocatalysts with Dual‐Active‐Center for Highly Stable Ultra‐Low‐Temperature Zinc‐Air Batteries

The development of advanced bifunctional catalysts for oxygen evolution reaction (OER) and oxygen reduction reaction (ORR) is significant for rechargeable zinc‐air batteries (ZABs). Herein, a unique dual active center alloying strategy is proposed to achieve the efficient bifunctional oxygen catalysis, and the high entropy effect is further exploited to modulate the structure and performance of the catalysts. The MOF‐assisted pyrolysis‐replacement‐alloying method was employed to construct the CoCuFeAgRu high‐entropy alloy (HEA), which are uniformly anchored in porous nitrogen‐doped carbon nanosheets. Notably, the obtained HEA catalyst exhibits excellent catalytic performance for both ORR and OER, and a peak power density of 136. 53 mW cm‐2 and an energy density of 987.9 mAh gZn‐1, surpassing the most of the previously reported bifunctional oxygen electrocatalysts. Moreover, the assembled flexible rechargeable ZAB enables excellent performance even at the ultralow temperature of ‐40°C, with an energy density of 601.6 mAh gZn‐1 and remarkable cycling stability up to 1,650 hours. Combined experimental and theoretical calculation results reveal that the excellent bifunctional catalytic activity of the HEA catalyst originated from the synergistic effect of the Ag and Ru dual active centers, and the optimization of the electronic structure by alloying effect.

Every reaction Detail Matters: An in silico driven Step-by-Step Guide to understand the B2O3-Catalyzed CO2 to cyclic carbonates conversion

The catalytic conversion of carbon dioxide (CO2) to cyclic organic carbonates (COCs) via cycloaddition with epoxides offers a dual benefit of reducing CO2 emissions while producing valuable chemical products. In this detailed in silico study, we employ density functional theory (DFT) to meticulously investigate the mechanisms underlying the B2O3/n-NBu4Br-catalyzed cycloaddition of CO2 and epoxides, following a step-by-step approach according to the reaction details. We provide a comprehensive comparison of the non-catalyzed, n-NBu4Br alone, and B2O3/n-NBu4Br-catalyzed pathways, emphasizing two distinct active sites within the B2O3 framework: Site 1 (six-membered boroxol ring) and Site 2 (open chain configuration). Our computational analysis highlights that the Site 1-catalyzed reaction pathway is more favorable, featuring a lower overall energy barrier of 26.8 kcal/mol, compared to 32.5 kcal/mol for the Site 2-catalyzed pathway. Detailed intrinsic bond orbital (IBO), natural adaptive orbital (NAdO) and distortion-interaction analysis (DIA) reveal significant differences in bonding properties and energy interactions, elucidating why Site 1 exhibits superior catalytic activity over Site 2. These findings are corroborated by experimental observations, which indicate that ball milling B2O3 increases defect sites, thereby enhancing exposure of active sites Site 1 and improving catalytic performance. This study provides an in-depth understanding of how the intrinsic properties of boron active sites influence the catalytic efficiency of B2O3, offering valuable insights for the design and optimization of metal-free catalysts for CO2 conversion.

One-Step Construction of Hierarchical Porous and Defect-Rich Zn2+-Doped NH2-MIL-125(Ti) to Enhance Photocatalytic Degradation of Tetracycline Hydrochloride.

The development of efficient metal-organic framework (MOF) photocatalysts for the degradation of tetracycline hydrochloride (TC) is crucial for environmental and public health. Herein, NH2-MIL-125(Ti) flakes (namely, ZnxTi1-x-NML), featuring defect-rich and Zn2+-doping, were synthesized using a one-step solvothermal method. For the first time, the crystal structure of Zn-doped NML was determined by combining extended X-ray absorption with fine structure spectroscopy. The formation mechanisms of the flake morphology with hierarchical porous structures were thoroughly investigated. Compared to NH2-MIL-125(Ti), Zn0.15Ti0.85-NML achieved a 3.4-fold increase in removal of TC under simulated sunlight. The adjusted electronic structure enhances superoxide radical production, coupled with a flake-like and porous architecture that promotes reaction sites, improved mass transfer, and reduced charge distances. Combined with theoretical calculations of the density of states and electrostatic potential, the ligand-metal-metal charge transfer process was elucidated. The possible pathway for the photocatalytic degradation of TC by Zn0.15Ti0.85-NML was further speculated. Moreover, the safety of the photocatalytic pathway was assessed by predicting the toxicity of the degradation intermediates. Our findings link the structure of MOFs to their catalytic efficiency, guiding the creation of sustainable photocatalysts.

Metal nanoparticles encapsulation within multi-shell spongy-core porous microspheres for efficient tandem catalysis

The “one-pot” cascade process involves multiple catalytic conversions followed by a single workup stage. This method has the capability to optimize catalytic efficiency by reducing chemical processes. The key to achieving cascade reactions lies in designing cascade catalysts with well-dispersed, stably immobilized, and accessible noble metal nanoparticles for multiple catalytic conversions. This work presents a strategy for creating long-lasting cascade catalysts by encapsulating Ru and Pd nanoparticles within multi-shell spongy-core porous microspheres (MS-SC-PMs). This cascade catalyst strategy enables the continuous hydrogenation of nitrobenzene to aniline and further to cyclohexylamine, demonstrating both high selectivity and conversion rates. Notably, this approach overcomes the typical challenges associated with noble metal nanoparticles, such as poor stability and recyclability, as it maintains its performance over ten consecutive cycles. Additionally, the MS-SC-PMs have the versatility to encapsulate various metal nanoparticles, providing catalytic versatility, scalability, and a promising avenue for designing long-lasting catalysts loaded with nanoparticles.