Specific protein-DNA Interactions Research Articles

Which Comes First, The Deformation or the Binding?

Which comes first, the deformation or the binding?High specificity of protein-DNA interaction is often related with specific deformation of the binding site. B-Z transition is the most dramatic structural change induced by protein-DNA interaction, where some segment of DNA abruptly changes from the right-handed B-DNA to the left-handed Z-DNA by the help of specific proteins.Here, we report single-molecule FRET studies on protein-induced Z-DNA formation. DNA duplexes with six CG-repeats were prepared. To monitor the conformational dynamics of the CG-repeat, we labeled Cy3 and Cy5 at each end of the CG-repeat. Surface-immobilized DNA molecules did not show any structural dynamics in normal physiological conditions. When a Z-DNA inducing protein, Zα, was added to the buffer solution, however, fluorescence intensity increased abruptly without any accompanying FRET change. Abrupt FRET change occurred with time delay (∼10 minute at 25°C on average). When the proteins were washed out, molecules didn’t recover the original FRET value for more than 3 hours, but molecules without the FRET change readily recovered their original fluorescence intensity. From these result, we conclude that Zα protein weakly interact with B-DNA, but the interaction becomes extremely strong once Z-DNA is formed.Next, we prepared a DNA duplex with methylated cytosine in the CG repeat. With millimolar Ni2+ in the buffer solution, we observed the intrinsic B-Z transition dynamics, and Z-DNA stabilization by Zα proteins. The transition time from B-DNA to Z-DNA, however, was not affected by the presence of Zα proteins, which strongly support that Zα protein induces Z-DNA by passively trapping Z-DNA structure transiently formed by the intrinsic B-Z transition dynamics. Even though we cannot directly observe Z-DNA, Z-DNA's are actually waiting there inside the cell to play their biological roles on time.

THAP proteins target specific DNA sites through bipartite recognition of adjacent major and minor grooves.

THAP-family C2CH zinc-coordinating DNA-binding proteins function in diverse eukaryotic cellular processes, such as transposition, transcriptional repression, stem-cell pluripotency, angiogenesis and neurological function. To determine the molecular basis for sequence-specific DNA recognition by THAP proteins, we solved the crystal structure of the Drosophila melanogaster P element transposase THAP domain (DmTHAP) complexed with a natural 10-base pair site. In contrast to C2H2 zinc fingers, DmTHAP docks a conserved β-sheet into the major groove and a basic C-terminal loop into the adjacent minor groove. We confirmed specific protein-DNA interactions by mutagenesis and DNA binding assays. Sequence analysis of natural and in-vitro-selected binding sites suggests several THAPs (DmTHAP, human THAP1 and THAP9) recognize a bipartite TxxGGGx(A/T) consensus motif; homology suggests THAP proteins bind DNA through a bipartite interaction. These findings reveal the conserved mechanisms by which THAP-family proteins engage specific chromosomal target elements.

Comparison of DNA binding across protein superfamilies

Specific protein-DNA interactions are central to a wide group of processes in the cell and have been studied both experimentally and computationally over the years. Despite the increasing collection of protein-DNA complexes, so far only a few studies have aimed at dissecting the structural characteristics of DNA binding among evolutionarily related proteins. Some questions that remain to be answered are: (a) what is the contribution of the different readout mechanisms in members of a given structural superfamily, (b) what is the degree of interface similarity among superfamily members and how this affects binding specificity, (c) how DNA-binding protein superfamilies distribute across taxa, and (d) is there a general or family-specific code for the recognition of DNA. We have recently developed a straightforward method to dissect the interface of protein-DNA complexes at the atomic level and here we apply it to study 175 proteins belonging to nine representative superfamilies. Our results indicate that evolutionarily unrelated DNA-binding domains broadly conserve specificity statistics, such as the ratio of indirect/direct readout and the frequency of atomic interactions, therefore supporting the existence of a set of recognition rules. It is also found that interface conservation follows trends that are superfamily-specific. Finally, this article identifies tendencies in the phylogenetic distribution of transcription factors, which might be related to the evolution of regulatory networks, and postulates that the modular nature of zinc finger proteins can explain its role in large genomes, as it allows for larger binding interfaces in a single protein molecule.

Coupling Sequence-specific Recognition to DNA Modification

Enzymes that modify DNA are faced with significant challenges in specificity for both substrate binding and catalysis. We describe how single hydrogen bonds between M.HhaI, a DNA cytosine methyltransferase, and its DNA substrate regulate the positioning of a peptide loop which is approximately 28 A away. Stopped-flow fluorescence measurements of a tryptophan inserted into the loop provide real-time observations of conformational rearrangements. These long-range interactions that correlate with substrate binding and critically, enzyme turnover, will have broad application to enzyme specificity and drug design for this medically relevant class of enzymes.

From Nonspecific DNA–Protein Encounter Complexes to the Prediction of DNA–Protein Interactions

DNA–protein interactions are involved in many essential biological activities. Because there is no simple mapping code between DNA base pairs and protein amino acids, the prediction of DNA–protein interactions is a challenging problem. Here, we present a novel computational approach for predicting DNA-binding protein residues and DNA–protein interaction modes without knowing its specific DNA target sequence. Given the structure of a DNA-binding protein, the method first generates an ensemble of complex structures obtained by rigid-body docking with a nonspecific canonical B-DNA. Representative models are subsequently selected through clustering and ranking by their DNA–protein interfacial energy. Analysis of these encounter complex models suggests that the recognition sites for specific DNA binding are usually favorable interaction sites for the nonspecific DNA probe and that nonspecific DNA–protein interaction modes exhibit some similarity to specific DNA–protein binding modes. Although the method requires as input the knowledge that the protein binds DNA, in benchmark tests, it achieves better performance in identifying DNA-binding sites than three previously established methods, which are based on sophisticated machine-learning techniques. We further apply our method to protein structures predicted through modeling and demonstrate that our method performs satisfactorily on protein models whose root-mean-square Cα deviation from native is up to 5 Å from their native structures. This study provides valuable structural insights into how a specific DNA-binding protein interacts with a nonspecific DNA sequence. The similarity between the specific DNA–protein interaction mode and nonspecific interaction modes may reflect an important sampling step in search of its specific DNA targets by a DNA-binding protein.

ChIP-seq: Using high-throughput sequencing to discover protein–DNA interactions

Chromatin immunoprecipitation (ChIP) allows specific protein–DNA interactions to be isolated. Combining ChIP with high-throughput sequencing reveals the DNA sequence involved in these interactions. Here, we describe how to perform ChIP-seq starting with whole tissues or cell lines, and ending with millions of short sequencing tags that can be aligned to the reference genome of the species under investigation. We also outline additional procedures to recover ChIP-chip libraries for ChIP-seq and discuss contemporary issues in data analysis.

Sequence Fourier Analysis of a Specific Protein-DNA (RNA) Interaction; an Intermolecular Frequency Symmetry

Here, we first report that a specific protein-DNA (RNA) interaction between p53 protein and divergent I kappa B kinase interacting protein (IKIP)-Apaf1 DNA promoter region, and between poliovirus 3CD protein and the 5' terminal region of the RNA sequence can be successfully elucidated with a sequence Fourier analysis, alike various specific protein-protein interactions described previously. Based on these, the intermolecular frequency symmetry would be evolutionarily conserved in a specific interaction of the bioactive structure of various long-chain sequences. In addition, the symmetry is fairly sensitive to a substitution (or a point mutation) on the sequence.

A functional analysis of the CREB signaling pathway using HaloCHIP-chip and high throughput reporter assays

BackgroundRegulation of gene expression is essential for normal development and cellular growth. Transcriptional events are tightly controlled both spatially and temporally by specific DNA-protein interactions. In this study we finely map the genome-wide targets of the CREB protein across all known and predicted human promoters, and characterize the functional consequences of a subset of these binding events using high-throughput reporter assays. To measure CREB binding, we used HaloCHIP, an antibody-free alternative to the ChIP method that utilizes the HaloTag fusion protein, and also high-throughput promoter-luciferase reporter assays, which provide rapid and quantitative screening of promoters for transcriptional activation or repression in living cells.ResultsIn analysis of CREB genome-wide binding events using a comprehensive DNA microarray of human promoters, we observe for the first time that CREB has a strong preference for binding at bidirectional promoters and unlike unidirectional promoters, these binding events often occur downstream of transcription start sites. Comparison between HaloCHIP-chip and ChIP-chip data reveal this to be true for both methodologies, indicating it is not a bias of the technology chosen. Transcriptional data obtained from promoter-luciferase reporter arrays also show an unprecedented, high level of activation of CREB-bound promoters in the presence of the co-activator protein TORC1.ConclusionThese data suggest for the first time that TORC1 provides directional information when CREB is bound at bidirectional promoters and possible pausing of the CREB protein after initial transcriptional activation. Also, this combined approach demonstrates the ability to more broadly characterize CREB protein-DNA interactions wherein not only DNA binding sites are discovered, but also the potential of the promoter sequence to respond to CREB is evaluated.

Effects of kink and flexible hinge defects on mechanical responses of short double-stranded DNA molecules

We predict various detectable mechanical responses to the presence of local DNA defects which are defined as short DNA segments exhibiting mechanical properties obviously different from the 50 nm persistence length based semiflexible polymer model. The defects discussed are kinks and flexible hinges either permanently fixed on DNA or thermally excited. Their effects on extension shift, the effective persistence length, the end-to-end distance distribution, and the cyclization probability are computed using a transfer-matrix method. Our predictions will be useful in future experimental designs to study DNA nicks or mismatch base pairs, mechanics of specific DNA sequences, and specific DNA-protein interaction using magnetic tweezer, fluorescence resonance energy transfer, plasmon resonance techniques, and the traditional biochemistry cyclization probability measurements.

Manipulation of the mechanical properties of a virus by protein engineering

In a previous study, we showed that the DNA molecule within a spherical virus (the minute virus of mice) plays an architectural role by anisotropically increasing the mechanical stiffness of the virus. A finite element model predicted that this mechanical reinforcement is a consequence of the interaction between crystallographically visible, short DNA patches and the inner capsid wall. We have now tested this model by using protein engineering. Selected amino acid side chains have been truncated to specifically remove major interactions between the capsid and the visible DNA patches, and the effect of the mutations on the stiffness of virus particles has been measured using atomic force microscopy. The mutations do not affect the stiffness of the empty capsid; however, they significantly reduce the difference in stiffness between the DNA-filled virion and the empty capsid. The results (i) reveal that intermolecular interactions between individual chemical groups contribute to the mechanical properties of a supramolecular assembly and (ii) identify specific protein-DNA interactions as the origin of the anisotropic increase in the rigidity of a virus. This study also demonstrates that it is possible to control the mechanical properties of a protein nanoparticle by the rational application of protein engineering based on a mechanical model.

DNA torsional stress propagates through chromatin fiber and participates in transcriptional regulation

Transient mechanical stresses induced by molecular motors that move DNA can propagate through the chromatin fiber and trigger local DNA alterations that in turn allow for specific DNA-protein interactions. Hence, DNA supercoiling modulations and chromatin conformational dynamics concur in gene regulation.

Covalent split protein fragment–DNA hybrids generated through N-terminus-specific modification of proteins by oligonucleotides

Semisynthetic protein-DNA hybrid molecules have recently attracted much attention as valuable tools for bioanalytical chemistry and nanobiotechnology. Here we describe a synthetic method for conjugating oligonucleotides to the N-terminus of recombinant proteins. Our strategy involves the conversion of amine-terminated oligonucleotides to thioester-functionalized oligonucleotides by using a bifunctional reagent bearing an N-hydroxysuccinimide ester and benzyl thioester group, followed by native chemical ligation with proteins containing an N-terminal cysteine. We applied this technique to construct split luciferase fragment-DNA hybrid systems in which the catalytic activity of split luciferase is restored by the re-assembly of each fragment through a specific DNA-protein or DNA-DNA interaction. Split protein fragment-DNA hybrids will offer new opportunities to explore the potential of protein-DNA conjugates for various applications.

Binding of MmeI Restriction–modification Enzyme to its Specific Recognition Sequence is Stimulated by S-adenosyl-l-methionine

Restriction endonucleases serve as a very good model for studying specific protein-DNA interaction. MmeI is a very interesting restriction endonuclease, but although it is useful in Serial Analysis of Gene Expression, still very little is known about the mechanism of its interaction with DNA. MmeI is a unique enzyme as besides cleaving DNA it also methylates specific sequence. For endonucleolytic activity MmeI requires Mg(II) and S-adenosyl-l-methionine (AdoMet). AdoMet is a methyl donor in the methylation reaction, but its requirement for DNA cleavage remains unclear. In the present article we investigated MmeI interaction with DNA with the use of numerous methods. Our electrophoretic mobility shift assay revealed formation of two types of specific protein-DNA complexes. We speculate that faster migrating complex consists of one protein molecule and one DNA fragment whereas, slower migrating complex, which appears in the presence of AdoMet, may be a dimer or multimer form of MmeI interacting with specific DNA. Additionally, using spectrophotometric measurements we showed that in the presence of AdoMet, MmeI protein undergoes conformational changes. We think that such change in the enzyme structure, upon addition of AdoMet, may enhance its specific binding to DNA. In the absence of AdoMet MmeI binds DNA to the much lower extent.

The Binding of Nuclear Factors to the as‐1 Element in the CaMV 35S Promoter is Affected by Cytosine Methylation in Vitro

Transcriptional gene silencing (TGS) is often associated with an increased level of cytosine methylation in the affected promoters. The effect of methylation of the cauliflower mosaic virus (CaMV) 35S promoter sequence on its binding to factors present in the nuclei was analyzed by electrophoretic mobility shift assays using extracts of petunia flowers. Specific DNA-protein interactions were detected in the region of the CaMV 35S promoter that contains the as-1 element and the region between - 345 and - 208. The binding of protein factor(s) to the as-1 element was influenced by cytosine methylation, whereas the binding to the region between - 345 and - 208 was unaffected. The results suggest that cytosine methylation of the as-1 element potentially affects the activity of the CaMV 35S promoter.

Characterization of Physical and Functional Anchor Site Interactions in Human Telomerase

Telomerase is a ribonucleoprotein reverse transcriptase (RT) that processively synthesizes telomeric repeats onto the ends of linear chromosomes to maintain genomic stability. It has been proposed that the N terminus of the telomerase protein subunit, telomerase RT (TERT), contains an anchor site that forms stable interactions with DNA to prevent enzyme-DNA dissociation during translocation and to promote realignment events that accompany each round of telomere synthesis. However, it is not known whether human TERT (hTERT) can directly interact with DNA in the absence of the telomerase RNA subunit. Here we use a novel primer binding assay to establish that hTERT forms stable and specific contacts with telomeric DNA in the absence of the human telomerase RNA component (hTR). We show that hTERT-mediated primer binding can be functionally uncoupled from telomerase-mediated primer extension. Our results demonstrate that the first 350 amino acids of hTERT have a critical role in regulating the strength and specificity of protein-DNA interactions, providing additional evidence that the TERT N terminus contains an anchor site. Furthermore, we establish that the RT domain of hTERT mediates important protein-DNA interactions. Collectively, these data suggest that hTERT contains distinct anchor regions that cooperate to help regulate telomerase-mediated DNA recognition and elongation.

Structural Studies on Pax-8 Prd Domain/DNA Complex

Pax-8 is a member of the Pax family of transcription factors and is essential in the development of thyroid follicular cells. Pax-8 has two DNA-binding domains: the paired domain and the homeo domain. In this study, a preliminary X-ray diffraction analysis of the mammalian Pax-8 paired domain in complex with the C-site of the thyroglobulin promoter was achieved. The Pax-8 paired domain was crystallized by the hanging-drop vapor-diffusion method in complex with both a blunt-ended 26 bp DNA fragment and with a sticky-ended 24 bp DNA fragment with two additional overhanging bases. Crystallization experiments make clear that the growth of transparent crystals with large dimensions and regular shape is particularly influenced by ionic strength. The crystals of Pax-8 complex with blunt-ended and sticky-ended DNA, diffracted synchrotron radiation to 6.0 and 8.0 Å resolution and belongs both to the C centered monoclinic system with cell dimensions: a = 89.88 Å, b = 80.05 Å, c = 67.73 Å, and β = 124.3° and a = 256.56, b = 69.07, c = 99.32 Å, and β = 98.1°, respectively. Fluorescence experiments suggest that the crystalline disorder, deduced by the poor diffraction, can be attributed to the low homogeneity of the protein-DNA sample. The theoretical comparative model of the Pax-8 paired domain complexed with the C-site of the thyroglobulin promoter shows the probable presence of some specific protein-DNA interactions already observed in other Pax proteins and the important role of the cysteine residues of PAI subdomain in the redox control of the DNA recognition.

Characterization of Protein−DNA Interactions Using Surface Plasmon Resonance Spectroscopy with Various Assay Schemes

Specific protein-DNA interactions play a central role in transcription and other biological processes. A comprehensive characterization of protein-DNA interactions should include information about binding affinity, kinetics, sequence specificity, and binding stoichiometry. In this study, we have used surface plasmon resonance spectroscopy (SPR) to study the interactions between human estrogen receptors (ER, alpha and beta subtypes) and estrogen response elements (ERE), with four assay schemes. First, we determined the sequence-dependent receptors' binding capacity by monitoring the binding of ER to various ERE sequences immobilized on a sensor surface (assay format denoted as the direct assay). Second, we screened the relative affinity of ER for various ERE sequences using a competition assay, in which the receptors bind to an ERE-immobilized surface in the presence of competitor ERE sequences. Third, we monitored the assembly of ER-ERE complexes on a SPR surface and thereafter the removal and/or dissociation of the ER (assay scheme denoted as the dissociation assay) to determine the binding stoichiometry. Last, a sandwich assay (ER binding to ERE followed by anti-ER recognition of a specific ER subtype) was performed in an effort to understand how ERalpha and ERbeta may associate and compete when binding to the DNA. With these assay schemes, we reaffirmed that (1) ERalpha is more sensitive than ERbeta to base pair change(s) in the consensus ERE, (2) ERalpha and ERbeta form a heterodimer when they bind to the consensus ERE, and (3) the binding stoichiometry of both ERalpha- and ERbeta-ERE complexes is dependent on salt concentration. With this study, we demonstrate the versatility of the SPR analysis. With the involvement of various assay arrangements, the SPR analysis can be further extended to more than kinetics and affinity study.

Use of biomolecular templates for the fabrication of metal nanowires

The nano-scale spatial organization of metallic and other inorganic materials into 1D objects is a key task in nanotechnology. Nano-scale fibers and tubes are very useful templates for such organization because of their inherent 1D organization. Fibrillar biological molecules and biomolecular assemblies are excellent physical supports on which to organize the inorganic material. Furthermore, these biological assemblies can facilitate high-order organization and specific orientation of inorganic structures by their utilization of highly specific biological recognition properties. In this minireview, I will describe the use of biomolecules and biomolecular assemblies, including DNA, proteins, peptides, and even viral particles, which are excellent templates for 1D organization of inorganic materials into wires. This ranges from simple attempts at electroless deposition on inert biological templates to the advanced use of structural motifs and specific protein-DNA interactions for nano-bio-lithography as well as the fabrication of multilayer organic and inorganic composites. The potential technological applications of these hybrid biological-inorganic assemblies will be discussed.

Pescadillo Interacts with the Cadmium Response Element of the Human Heme Oxygenase-1 Promoter in Renal Epithelial Cells

Renal tubular cells elicit adaptive responses following exposure to nephrotoxins, such as cadmium. One response is the up-regulation of the 32-kDa redox-sensitive protein, heme oxygenase-1. Exposure of renal proximal tubular epithelial cells to 10 mum cadmium demonstrated induction ( approximately 20-fold) of heme oxygenase-1 mRNA and protein. Using a 4.5-kb human heme oxygenase-1 promoter construct, the importance of a previously identified cadmium response element (TGCTAGAT) in HeLa cells was verified in renal epithelial cells. Specific protein-DNA interaction with this sequence was demonstrated using nuclear extracts from cadmium-treated cells. Yeast one-hybrid screen of a human kidney cDNA library resulted in the identification of pescadillo, a unique nucleolar, developmental protein, as an interacting protein with the cadmium response element and was confirmed by chromatin immunoprecipitation in vivo and gel shift assays with purified glutathione S-transferase-pescadillo protein in vitro. The specificity of the DNA-protein interaction was verified by the absence of a binding complex when the core sequence of the cadmium response element was mutated or deleted. In addition, B23/nucleophosmin, another nucleolar protein, did not interact with the cadmium response sequence. Overexpression of pescadillo resulted in increased activity of the 4.5-kb human heme oxygenase-1 promoter construct but failed to activate this construct when the cadmium response sequence was mutated. The findings demonstrate the important and previously unrecognized role of pescadillo as a DNA-binding protein interacting specifically with the cadmium response element of the human heme oxygenase-1 gene.

Protocol for the fast chromatin immunoprecipitation (ChIP) method

Chromatin and transcriptional processes are among the most intensively studied fields of biology today. The introduction of chromatin immunoprecipitations (ChIP) represents a major advancement in this area. This powerful method allows researchers to probe specific protein-DNA interactions in vivo and to estimate the density of proteins at specific sites genome-wide. We have introduced several improvements to the traditional ChIP assay, which simplify the procedure, greatly reducing the time and labor required to complete the assay. The simplicity of the method yields highly reproducible results. Our improvements facilitate the probing of multiple proteins in a single experiment, which allows for the simultaneous monitoring of many genomic events. This method is particularly useful in kinetic studies where multiple samples are processed at the same time. Starting with sheared chromatin, PCR-ready DNA can be isolated from 16-24 ChIP samples in 4-6 h using the fast method.