Space-time Adaptive Processing Method Research Articles

Isolated Point Clutter Suppression Method for Airborne STAP Radar in Wind Farm Environment

With the large-scale construction of wind farms, wind turbine isolated point clutter has an increasingly serious impact on airborne radar target detection performance. Traditional space-time adaptive processing methods cannot suppress wind turbine clutter (WTC) with spectrum broadening characteristics, which may lead to a decrease in target detection probability and an increase in false alarm rate. In this paper, a WTC suppression method for airborne radar based on micro-Doppler features is proposed, and we construct the feature subspace of wind turbine echo to distinguish wind turbine, target, clutter, and noise. First, the Sobel operator is used to process the radar range-Doppler spectrum, and the range cells of the wind turbines are preliminarily judged. Then the smallest of constant false alarm rate (SO-CFAR) method is used to further confirm the range cells where the wind turbines are located. Next, Mahalanobis distance is used to estimate the optimal dictionary atomic parameters of WTC, and the updated dictionary atoms are used to construct an orthogonal projection matrix to suppress WTC. Finally, short-range nonstationary clutter and sidelobe clutter are suppressed by space-time adaptive segment processing. On the one hand, the proposed method realizes the accurate positioning of wind turbines through image edge detection and constant false alarm detection. On the other hand, Mahalanobis distance is used to estimate the atomic parameters of the wind turbine dictionary, which ensures the homogeneity of wind turbine samples after clutter suppression. The simulation and measured data results show that the proposed method can significantly reduce the false alarm rate caused by WTC while ensuring the effective detection of the target.

A Novel Fast Iterative STAP Method with a Coprime Sampling Structure.

In space-time adaptive processing (STAP), the coprime sampling structure can obtain better clutter suppression capabilities at a lower hardware cost than the uniform linear sampling structure. However, in practical applications, the performance of the algorithm is often limited by the number of training samples. To solve this problem, this paper proposes a fast iterative coprime STAP algorithm based on truncated kernel norm minimization (TKNM). This method establishes a virtual clutter covariance matrix (CCM), introduces truncated kernel norm regularization technology to ensure the low rank of the CCM, and transforms the non-convex problem into a convex optimization problem. Finally, a fast iterative solution method based on the alternating direction method is presented. The effectiveness and accuracy of the proposed algorithm are verified through simulation experiments.

A Fast IAA–Based SR–STAP Method for Airborne Radar

Space–time adaptive processing (STAP) is an effective technology in clutter suppression and moving target detection for airborne radar. When working in the heterogeneous environment, the number of training samples that satisfy independent and identically distributed (IID) conditions is insufficient, making it difficult to ensure the estimation accuracy of the clutter plus noise covariance matrix for traditional STAP methods. Sparse recovery–based STAP (SR–STAP) methods have received widespread attention in the past few years. The accurate estimation of the clutter plus noise covariance matrix can be achieved using only a few training samples. The iterative adaptive approach (IAA) can quickly and accurately estimate the power spectrum, but applying this method directly to the STAP method cannot produce good performance. In this paper, a fast IAA–based SR–STAP method is proposed. Based on the weighted l1 problem, the IAA spectrum is used as a weighted term to obtain a good approximation. In order to obtain an analytical solution, we use the weighted l2 norm to approximate the weighted l1 norm without loss of performance. Compared with the IAA–STAP method, the proposed method is more robust to errors. Moreover, the proposed method has a fast computational speed. The effectiveness of the proposed method is demonstrated by simulations.

Beam-Space Post-Doppler Reduced-Dimension STAP Based on Sparse Bayesian Learning

The space–time adaptive processing (STAP) technique can effectively suppress the ground clutter faced by the airborne radar during its downward-looking operation and thus can significantly improve the detection performance of moving targets. However, the optimal STAP requires a large number of independent identically distributed (i.i.d) samples to accurately estimate the clutter plus noise covariance matrix (CNCM), which limits its application in practice. In this paper, we fully consider the heterogeneity of clutter in real-world environments and propose a sparse Bayesian learning-based reduced-dimension STAP method that achieves suboptimal clutter suppression performance using only a single sample. First, the sparse Bayesian learning (SBL) algorithm is used to estimate the CNCM using a single training sample. Second, a novel angular Doppler channel selection algorithm is proposed with the criterion of maximizing the output signal-to-clutter-noise ratio (SCNR). Finally, the reduced-dimension STAP filter is constructed using the selected channels. Simulation results show that the proposed algorithm can achieve suboptimal clutter suppression performance in extremely heterogeneous clutter environments where only one training sample can be used.

Space–Time Adaptive Processing Using Deep Neural Network-Based Shrinkage Algorithm Under Small Training Samples

This correspondence discusses a space-time adaptive processing (STAP) method using deep neural network (DNN) and shrinkage algorithm (SA) under small training samples. A DNN-based SA is developed to estimate the clutter-plus-noise covariance matrix (CNCM) from the sample covariance matrix. This technique establishes a learning-based nonlinear mapping between the sample eigenvalues and the optimal shrunk eigenvalues and thus provides an accurate CNCM estimation. Specifically, a DNN consisting of cascaded convolutional neural network (CNN) and fully connected network (FCN) is designed, where the CNN performs the feature extraction and the FCN derives the estimation of the shrunk eigenvalues. To improve the CNN performance, a deep residual learning strategy is introduced into CNN. Due to the lack of labeled data, an airborne radar system is simulated for the construction of dataset consisting of sample eigenvalues and optimal shrunk eigenvalues. Numerical results demonstrate that the proposed DNN-based SA STAP has superior performance in comparison with the state-of-the-art SA STAP methods.

Robust Space-Time Adaptive Processing Method for GNSS Receivers in Coherent Signal Environments

In the coherent signal environments caused by multipath propagation, the interference suppression performance of the global navigation satellite systems (GNSS) receivers decreases sharply. In this paper, a robust space-time adaptive processing (STAP) method for GNSS receivers is proposed to suppress interferences in coherent signal environments, by using the modified space-time two-dimensional iterative adaptive approach (ST2D-IAA) spectrum estimation. This method applies the IAA algorithm to the ST2D signal model of GNSS receivers, and further modifies the ST2D-IAA algorithm to accurately estimate the power spectrum and noise power simultaneously. The space-time interference-plus-noise covariance matrix (STINCM) is reconstructed by using the estimated power spectrum and noise power in the interference angle region. Based on the reconstructed STINCM, we construct the STAP beamforming optimization problem for the space-time steering vector (STSV) error vector, and further correct the STSV of GNSS signal. Finally, the weight vector of STAP beamforming is calculated by using the reconstructed STINCM and the corrected STSV of GNSS signal. Simulation results show that the proposed method can suppress interferences in coherent signal environments and outperforms the current methods.

A novel gridless space-time adaptive processing method based cyclic minimization

Space-time adaptive processing (STAP) algorithm based on sparse recovery (SR) can effectively suppress clutter in limited sample scenarios. However, the clutter suppression performance will be reduced because of grid mismatch (off-grid), which happens when the clutter ridge fails to match the dictionary. To address this issue, a novel gridless STAP algorithm based on cyclic minimization is proposed in this paper. Compared with the STAP algorithm based on atomic norm minimization (ANM), the proposed algorithm avoids the approximate loss caused by relaxing the rank norm to the nuclear norm. In addition, in order to improve the computational efficiency, we derive a fast iterative structure based on the alternating direction method of multipliers (ADMM) framework. The proposed algorithm offers better clutter suppression performance and excellent computational efficiency, according to a vast collection of experiments based on simulation data and measured data.

A Novel Fast Sparse Bayesian Learning STAP Algorithm for Conformal Array Radar

Space-time adaptive processing (STAP) is an important method of clutter suppression that requires adequate training samples. For an airborne conformal array radar, conventional STAP methods do not have enough training samples to acquire good performance due to the range dependent clutter caused by geometry and the problem of polarization. Sparse-recovery-based STAP (SR-STAP) methods have garnered significant attention in the past few decades because they only require a small number of training samples. Sparse Bayesian Learning (SBL) methods have seen increasing amounts of development due to its robust, self-regularizing nature and because it is not sensitive to user parameters, but it converges slowly. In this paper, a novel fast SBL (NFSBL) method is put forward to increase the rate of convergence. To minimize the SBL penalty function, the proposed method introduces the conjugate function to construct a surrogate function. Additional solution sparsity will be achieved through iteratively minimizing the surrogate function. Then, from the proposed method, we could obtain a more accurate clutter plus noise covariance matrix. Numerical simulation results express that this method could acquire better performance of STAP and improvement in convergence and computational complexity for a conformal array.

Range-Ambiguous Clutter Suppression for Space-Based Early Warning Radar Using Vertical FDA and Horizontal EPC

The range ambiguous clutter in space-based early warning radar is more severe compared with that in airborne radar due to the faster movement velocity. Meanwhile, the clutter angle-Doppler characteristics vary with range owing to Earth’s rotation. As a result, the mainbeam clutter returned from different ambiguous range occupies most of the Doppler spectrum, which leads to the degradation of the traditional space-time adaptive processing (STAP) performance in canceling clutter. Though frequency diverse array (FDA) based on multiple-input multiple-output can provide the ability to identify the range ambiguous clutter, it cannot perform well for space-based early warning radar because of the finite available vertical elements. In this paper, a novel STAP method, which utilizes the element-pulse coding (EPC) and FDA technique to mitigate the range ambiguous clutter, is proposed. Firstly, EPC is used to pre-whiten the most range ambiguous clutter via coding and decoding in horizontal elements and coherent pulses. Then the interval in the vertical frequency of the residual range-ambiguous clutter is expanded by FDA, and thus the targets and clutter from the vertical mainlobe are easily extracted using a spatial filter with a few vertical elements. Finally, the extracted clutter can be effectively suppressed through the traditional STAP method. Simulation results are provided to demonstrate the performance of the proposed method.

Reduced-Complexity Subarray-Level Sparse Recovery STAP for Multichannel Airborne Radar WGMTI Application

For multichannel airborne radars, wide-area ground-moving target indication (WGMTI) processing can quickly obtain the dynamic distribution of moving targets in a wide area, which holds considerable significance in many fields. Nevertheless, the WGMTI mode suffers from the interference of powerful ground clutter, which frequently submerges slow-moving targets and causes many false alarms in subsequent moving target detection. Space–time adaptive processing (STAP) can successfully suppress clutter, but its performance depends critically on the available training samples. Consequently, an effective STAP method characterized by fast processing and a small sample size for WGMTI application in multichannel airborne radars must be developed. In this paper, a subarray-level sparse recovery STAP (SR-STAP) processing framework is proposed for multichannel airborne radars. First, the characteristics of the subarray-level received clutter are discussed in detail. Second, on the basis of this analysis, we further designed a joint space–time dictionary and developed a separable tensor-based sparse Bayesian learning (STSBL) method. In this method, two-stage decomposition is proposed to ensure that large-scale data can be degraded into small-scale data in processing, which significantly improves computation efficiency. Finally, the effectiveness of the proposed STSBL-STAP method in WGMTI processing was verified using real measurement data obtained from a developed dual-channel Ku-band airborne radar.

Autoencoder Neural Network-Based STAP Algorithm for Airborne Radar with Inadequate Training Samples

Clutter suppression is a key problem for airborne radar, and space-time adaptive processing (STAP) is a core technology for clutter suppression and moving target detection. However, in practical applications, the non-uniform time-varying environments including clutter range dependence for non-side-looking radar lead to the training samples being unable to satisfy the sample requirements of STAP that they should be independent identical distributed (IID) and that their number should be greater than twice the system’s degree of freedom (DOF). The lack of sufficient IID training samples causes difficulty in the convergence of STAP and further results in a serious degeneration of performance. To overcome this problem, this paper proposes a novel autoencoder neural network for clutter suppression with a unique matrix designed to be decoded and encoded. The main challenges are improving the accuracy of the estimation of the clutter-plus-noise covariance matrix (CNCM) for STAP convergence, designing the form of the data input to the network, and making the network successfully explored to the improvement of CNCM. For these challenges, the main proposed solutions include designing a unique matrix with a certain dimension and a series of covariance data selections and matrix transformations. Consequently, the proposed method compresses and retains the characteristics of the covariances, and abandons the deviations caused by the non-uniformity and the deficiency of training samples. Specifically, the proposed method firstly develops a unique matrix whose dimension is less than half of the DOF, meanwhile, it is based on a processing of the selected clutter-plus-noise covariances. Then, an autoencoder neural network with l2 regularization and the sparsity regularization is proposed for the unique matrix to be decoded and encoded. The training of the proposed autoencoder can be achieved by reducing the total loss function with the gradient descent iterations. Finally, an inverted processing for the autoencoder output is designed for the reconstruct ion of the clutter-plus-noise covariances. Simulation results are used to verify the effectiveness and advantages of the proposed method. It performs obviously superior clutter suppression for both side-looking and non-side-looking radars with strong clutter, and can deal with the insufficient and the non-uniform training samples. For these conditions, the proposed method provides the relatively narrowest and deepest IF notch. Furthermore, on average it improves the improvement factor (IF) by 10 dB more than the ADC, DW, JDL, and original STAP methods.

Clutter suppression and target energy focussing for airborne rotating antenna radar using improved Space‐time adaptive processing

AbstractRotating antenna radar is widely used on the airborne platform to extend the range of the radar detection airspace. However, the echo signal received by an airborne rotating radar is spread in the Doppler domain due to the platform motion and the antenna rotation. In the process of a long‐time integration, the antenna rotation harms the signal‐to‐noise ratio and reduces the performance of target detection when using conventional processing methods. Although conventional space‐time adaptive processing (STAP) has been used successfully to suppress clutter on an airborne radar, it does not take into account the antenna rotation. It decreases the performance of clutter suppression on the airborne rotating antenna radar. The signal model of airborne rotating antenna radar is analysed and the STAP technique to the rotating antenna scenario is improved to effectively suppress clutter and focus on target energy. Firstly, the echo of the airborne rotating antenna radar is modelled. Secondly, the factors affecting the Doppler difference of the array elements are investigated. Thirdly, an improved STAP method is proposed. Finally, the effect of antenna rotation on clutter Doppler characteristics and the clutter suppression and target energy focussing on the effects of the improved STAP technique are investigated. Experimental results demonstrate the effectiveness of the proposed method.

The influence analysis of antenna radiation pattern aberration of airborne radar on clutter feature

In order to quantitatively evaluate the influence of the aberration of the antenna radiation pattern of airborne radar on clutter feature, the range-azimuth two dimensional (2D) model of the airborne radar clutter is established. Then the theoretic modelling and simulation analysis are proposed in three aspects, including the Doppler, power spectrum and space-time 2D characteristics of the clutter. Finally, the processing of moving target indication, pulse Doppler and space-time adaptive processing are used to suppress the clutter of the echo signals before and after the aberration. The results of the simulations indicate the aberration would elevate the sidelobe level, extend the power spectrum and bend the space-time trajectory of the clutter Doppler spectra. And the residual clutter would be elevated nearly 5 dB after STAP processing. Then the pattern preserving and fast time cancel combined space-time adaptive processing method is proposed, which can obtain narrow clutter notch and large improvement factor, and effectively suppress clutter. The modelling and quantitative analysis study have important theoretical and engineering significance for the detection capability of the airborne radar installed on the fuselage of the aircraft platform, the tactical and technical performance index, and improving the signal processing ability of airborne radar.

Space-Time Adaptive Processing Based on Modified Sparse Learning via Iterative Minimization for Conformal Array Radar.

Space-time adaptive processing (STAP) is a well-known technique for slow-moving target detection in the clutter spreading environment. For an airborne conformal array radar, conventional STAP methods are unable to provide good performance in suppressing clutter because of the geometry-induced range-dependent clutter, non-uniform spatial steering vector, and polarization sensitivity. In this paper, a knowledge aided STAP method based on sparse learning via iterative minimization (SLIM) combined with Laplace distribution is proposed to improve the STAP performance for a conformal array. The proposed method can avoid selecting the user parameter. the proposed method constructs a dictionary matrix that is composed of the space-time steering vector by using the prior knowledge of the range cell under test (CUT) distributed in clutter ridge. Then, the estimated sparse parameters and noise power can be used to calculate a relatively accurate clutter plus noise covariance matrix (CNCM). This method could achieve superior performance of clutter suppression for a conformal array. Simulation results demonstrate the effectiveness of this method.

A Space-Time Adaptive Processing Method Based on Sparse Bayesian Learning for Maneuvering Airborne Radar

Space-time adaptive processing (STAP) is an effective technology in clutter suppression and moving target detection for airborne radar. Because airborne radar moves at a constant acceleration, and there is a lack of independent and identically distributed (IID) training samples caused by the heterogeneous environment, using the conventional STAP methods directly cannot ensure a good performance. To eliminate these effects and improve the performance of clutter suppression, a STAP method based on a sparse Bayesian learning (SBL) framework for uniform acceleration radar is proposed here. This paper introduces the signal model of the uniform acceleration radar. To promote the sparsity, a generalized double Pareto (GDP) prior is introduced into our method, and the estimation of hyper parameters via expectation maximization (EM) is given. The effectiveness of the proposed method is demonstrated by simulations.

Single-Channel Anti-Jamming Receiver With Harmonic-Based Space-Time Adaptive Processing

A novel anti-jamming receiver with harmonic-based space-time adaptive processing (STAP) is presented. In radio frequency (RF) front, a 1-bit time-modulated array (TMA) is deployed to modulate the received signals periodically, indicating that only one RF channel is required. Then in digital domain, the generated multiple harmonics are extracted to the same frequency for harmonic-based STAP. Theoretical derivations of harmonic signal model and anti-jamming power inversion (PI) algorithm are provided. Simulation results show that the harmonic-based STAP method has additional frequency resolution and outperforms the pure single-channel spatial filtering method. Also, the proposed receiver is superior to the multi-channel anti-jamming receiver in terms of hardware complexity, cost and unbalances of amplitude and phase.

Range Ambiguous Clutter Suppression Approach With Elevation Time Diverse Array

When range ambiguity and range dependence coexist in forward-looking ground moving target indication radar, the traditional space-time adaptive processing (STAP) approaches may fail to work. To cope with this issue, a range-ambiguous clutter suppression approach based on elevation time diverse array (TDA) radar system and azimuth phase coding technique is presented in this article. Due to the advantages of frequency scanning, the elevation TDA radar is able to cover all directions by transmitting a single time-shifted waveform. Therefore, a frequency bandpass filter is devised for each single range bin to achieve the mainlobe echo extraction procedure. In the sequel, the azimuth phase decoding and Doppler filtering are performed to deal with the residual sidelobe ambiguous energy. With two-dimensional filtering, one can extract the unambiguous signals for each range region independently. Then, the traditional clutter compensation and STAP methods are employed to suppress the ground clutter. Finally, the effectiveness of the proposed framework in resolving range ambiguity is verified by the numerical simulation experiments.

Beam-Space Reduced-Dimension 3D-STAP for Nonside-Looking Airborne Radar

The space–time adaptive processing (STAP) technique has achieved good clutter suppression performance for a side-looking airborne radar; however, it suffers from severe performance degradation in nonside-looking airborne radar. This is because the clutter distribution varies considerably with range. The 3D STAP can provide better performance compared with the traditional STAP methods in such a nonstationary clutter environment, but it requires high computational complexity and sample support. In this letter, the characteristic of azimuth–elevation–Doppler 3-D beam pattern for the planar array is explored, and a novel reduced-dimension scheme combined with this characteristic is proposed. We further developed three basic reduced-dimension structures according to this scheme. Furthermore, we also prove that the first and third structures are just the direct extension of the traditional 2-D generalized multibeam and joint-domain localized methods. The second one is an original structure that performs local reduced-dimension processing with three orthogonal planar windows. Numerical results verify that the proposed structures have significant advantages in reducing computational load and training sample numbers compared with existing 3D STAP methods. In particular, the second structure shows the best comprehensive performance in the bad samples environment.

Robust STAP Detection Based on Volume Cross-Correlation Function in Heterogeneous Environments

The performance of moving target detection in heterogeneous environments with the traditional space-time adaptive processing (STAP) may degrade when the real clutter environments deviate from the prior assumption on the clutter distribution. In this letter, a new detector for STAP applications based on volume cross-correlation function (VCF), namely VCF-STAP, is proposed to achieve robust performance of moving target detection in heterogeneous environments. In the new VCF-STAP, the VCF is used to form a distance measure between the sample signal subspace and the target subspace without modeling the clutter distribution. Then, a new robust STAP detection statistic is constructed using this distance measure. Simulation and experimental results show that the proposed VCF-STAP achieves robust performance of moving target detection in heterogeneous environments, especially it achieves much superior detection performance compared with existing STAP methods when the real clutter environments do not satisfy their prior assumptions. Besides, it is also shown that VCF-STAP has the constant false alarm rate (CFAR) property.

A Two-Stage STAP Method Based on Fine Doppler Localization and Sparse Bayesian Learning in the Presence of Arbitrary Array Errors.

In the presence of unknown array errors, sparse recovery based space-time adaptive processing (SR-STAP) methods usually directly use the ideal spatial steering vectors without array errors to construct the space-time dictionary; thus, the steering vector mismatch between the dictionary and clutter data will cause a severe performance degradation of SR-STAP methods. To solve this problem, in this paper, we propose a two-stage SR-STAP method for suppressing nonhomogeneous clutter in the presence of arbitrary array errors. In the first stage, utilizing the spatial-temporal coupling property of the ground clutter, a set of spatial steering vectors with array errors are well estimated by fine Doppler localization. In the second stage, firstly, in order to solve the model mismatch problem caused by array errors, we directly use these spatial steering vectors obtained in the first stage to construct the space-time dictionary, and then, the constructed dictionary and multiple measurement vectors sparse Bayesian learning (MSBL) algorithm are combined for space-time adaptive processing (STAP). The proposed SR-STAP method can exhibit superior clutter suppression performance and target detection performance in the presence of arbitrary array errors. Simulation results validate the effectiveness of the proposed method.