Space Group P2 Research Articles

Strategic design of a rare trigonal symmetric luminescent covalent organic framework by linker modification

We designed a trigonal symmetric imine-linked covalent organic framework (COF), TFPC-DAB, with control over the angularity of the building units, where a bent C2-symmetric diamine, such as 1,3-diaminobenzene (1,3-DAB or DAB), with an exo-angle of 120° was used instead of those with an exo-angle of 180°, in combination with a C3-symmetric trialdehyde, such as tri(4-formylphenoxy)cyanurate (TFPC). Its synthesis was accomplished by reacting the building units in a mixture of mesitylene/dioxane/6 M acetic acid under solvothermal conditions. The phase purity, thermal stability, and porosity of TFPC-DAB were established by various analytical techniques. Utilizing the Density Functional Tight Binding (DFTB+) simulation and Pawley refinement, the best fit of the small angle x-ray pattern was found to have an AA stacking of TFPC-DAB in the trigonal space group P3 with low refinement parameters. Such smart materials are in huge demand to detect hazardous corrosive chemicals, such as HCl and NH3. The dual features of electron deficient π-acidic triazine moiety and heteroatoms (N/O) from TFPC and electron rich phenyl units from DAB embodied in the framework enhance its luminescent property and thereby make it suitable for solvent-based HCl and NH3 sensing. The detection limits for HCl and NH3 in methanol were found to be 14 and 82 ppb, respectively. The effect of solvent polarity on the sensing studies was observed with much lower detection limits in dioxane: 2.5 and 11 ppb for HCl and NH3, respectively. A detailed theoretical calculation using density functional theory and configurational bias Monte Carlo modules was conducted for understanding interactions between the COF and HCl or NH3 analytes.

Dmitryvarlamovite, Ti2(Fe3+Nb)O8, a new columbite-supergroup mineral related to the wolframite group

AbstractThe new columbite-supergroup mineral dmitryvarlamovite, ideally Ti2(Fe3+Nb)O8, was discovered in weathered alkaline metasomatic assemblages formed after late Riphaean sedimentary carbonate rocks of the Verkhne-Shchugorskoe deposit, Middle Timan Mts., Russia. The associated minerals are columbite-(Fe), pyrochlore-group minerals, monazite-(Ce), xenotime-(Y), baryte, pyrite, drugmanite and plumbogummite. Dmitryvarlamovite occurs as isolated anhedral equant grains up to 0.5 mm across. The colour of dmitryvarlamovite is black, the streak is black and the lustre is submetallic. The new mineral is brittle, with the mean VHN hardness of 753 kg mm–2 corresponding to the Mohs’ hardness of 6. No cleavage is observed. The fracture is conchoidal. The calculated density is 4.891 g⋅cm–3. In reflected light, dmitryvarlamovite is light grey; no pleochroism is observed. The reflectance values (Rmin, % / Rmax, % / λ, nm) are: 19.8/20.3/470, 18.3/18.9/546, 17.8/18.5/589 and 17.3/17.8/650. The chemical composition is (electron microprobe data, with iron divided into Fe2O3 and FeO based on the charge balance, wt.%): MnO 0.11, FeO 1.51, V2O3 0.89, Cr2O3 0.28, Fe2O3 19.26, TiO2 37.72, Nb2O5 40.08, total 99.85. The IR and Raman spectra indicate the absence of H-, C- and N-bearing groups. The empirical formula is (Fe2+0.08V3+0.05Cr3+0.01Fe3+0.92Ti1.79Nb1.15)Σ4.00O8. The crystal structure was determined using single-crystal X-ray diffraction data and refined to R = 0.048. Dmitryvarlamovite is orthorhombic, space group P21212, a = 4.9825(6), b = 4.6268(4), c = 5.5952(6) Å and V = 5.5952(6) Å3 (Z = 1). The structure is related to those of wolframite-group minerals but differs in the scheme of cation ordering. The crystal-chemical formula derived based on the structural data is (Ti0.57Nb0.21Fe3+0.15Fe2+0.04V0.02Cr0.01)2(Nb0.36Ti0.33Fe3+0.31)2O8. The strongest lines of the powder X-ray diffraction pattern [d, Å (I, %) (hkl)] are: 3.58 (40) (011), 2.911 (100) (111), 2.809 (40) (002), 2.497 (38) (020), 2.447 (29) (103), 1.7363 (32) (103) and 1.7047 (29) (220). Dmitryvarlamovite is named after Dmitry Anatol'evich Varlamov (b. 1965).

Deciphering the crystal structure of a novel nanobody against the NEIL1 DNA glycosylase.

Nanobodies (VHHs) are single-domain antibodies with three antigenic CDR regions and are used in diverse scientific applications. Here, an ∼14 kDa nanobody (A5) specific for the endonuclease VIII (Nei)-like 1 or NEIL1 DNA glycosylase involved in the first step of the base-excision repair pathway was crystallized and its structure was determined to 2.1 Å resolution. The crystals posed challenges due to potential twinning and anisotropic diffraction. Despite inconclusive twinning indicators, reprocessing in an orthorhombic setting and molecular replacement in space group P21212 enabled the successful modeling of 96% of residues in the asymmetric unit, with final Rwork and Rfree values of 0.199 and 0.229, respectively.

(+)-Cedrol hemihydrate: a natural product derived from drying eastern red cedar (Juniperus virginiana) wood.

Cedrol-like compounds are of pharmacological interest due to their diverse range of medicinal effects and are used globally in traditional medicines and cosmetics. Many cedrol tautomers are known from molecular studies but few have been studied in crystalline form by X-ray diffraction. Acicular white crystals collected from the wood of eastern red cedar (Juniperus virginiana) are determined to be (+)-cedrol hemihydrate, namely, (1S,2R,5S,7R,8R)-2,6,6,8-tetramethyltricyclo[5.3.1.01,5]undecan-8-ol hemihydrate, C15H26O·0.5H2O, a novel packing of two unique cedrol molecules (Z' = 2) with a single water molecule [space group P212121; a = 6.1956 (1), b = 14.5363 (1), and c = 30.9294 (4) Å]. The hydrogen bonding forms a one-dimensional spiral chain running along the a axis, following the chirality of the cedrol molecule, through hydrogen-bonding interactions with a right-handed helical configuration in graph-set notation Δ-C33(6) > a > c > b. The crystal packing and symmetry are different from crystalline isocedrol due to the different hydrogen-bonding geometry.

Using synchrotron high-resolution powder X-ray diffraction for the structure determination of a new cocrystal formed by two active principle ingredients.

The crystal structure of a new 1:1 cocrystal of carbamazepine and S-naproxen (C15H12N2O·C14H14O3) was solved from powder X-ray diffraction (PXRD). The PXRD pattern was measured at the high-resolution beamline CRISTAL at synchrotron SOLEIL (France). The structure was solved using Monte Carlo simulated annealing, then refined with Rietveld refinement. The positions of the H atoms were obtained from density functional theory (DFT) ground-state calculations. The symmetry is orthorhombic with the space group P212121 (No. 19) and the following lattice parameters: a = 33.5486 (9), b = 26.4223 (6), c = 5.3651 (10) Å and V = 4755.83 (19) Å3.

Synthesis, crystal structure and luminescence of [(CH3)3S]2ZrCl6

The current work reports on the synthesis, crystal structure and optoelectronic properties of (Me3S)2ZrCl6, prepared by reacting the solid precursors (Me3S)Cl and ZrCl4 in pyrex tubes at 150 °C under vacuum. According to X-ray powder diffraction and Rietveld analysis, (Me3S)2ZrCl6 crystallizes in the cubic space group Pa-3 (No. 205) with a = 12.4664(1) Å. The crystal structure consists of isolated trigonal pyramidal trimethylsulfonium cations and octahedral [ZrCl6]2- anions with weak hydrogen bonds among them and no signs of structural disorder. This 0D-material is stable in air and dissolves in water and dimethylformamide. Raman spectroscopy shows characteristic vibrational modes for the organic and inorganic moieties over the frequency range of 5–3200 cm−1. UV-Vis spectroscopy reveals a large band gap of 5.1 eV and a broadband luminescence with emission maximum at 465 nm in the solid state. The luminescent properties of (Me3S)2ZrCl6 are discussed and compared with those of similar inorganic or metal-organic compounds.

(S)-(+)-1-(4-Bromophenyl)-N-[(4-methoxyphenyl)methylidene]ethylamine and bis{(S)-(+)-1-(4-bromophenyl)-N-[(4-methoxyphenyl)methylidene]ethylamine-κN}dichloridopalladium(II)

The (S)-(+)-1-(4-bromophenyl)-N-[(4-methoxyphenyl)methylidene]ethylamine ligand, C16H16BrNO, (I), was synthesized through the reaction of 4-methoxyanisaldehyde with (S)-(−)-1-(4-bromophenyl)ethylamine. It crystallizes in the orthorhombic space group P212121 belonging to the Sohncke group, featuring a single molecule in the asymmetric unit. The refinement converged successfully, achieving an R factor of 0.0508. The PdII complex bis{(S)-(+)-1-(4-bromophenyl)-N-[(4-methoxyphenyl)methylidene]ethylamine-κN}dichloridopalladium(II), [PdCl2(C16H16BrNO)2], (II), crystallizes in the monoclinic space group P21 belonging to the Sohncke group, with two molecules in the asymmetric unit. The central atom is tetracoordinated by two N atoms and two Cl atoms, resulting in a square-planar configuration. The imine moieties exhibit a trans configuration around the PdII centre, with average Cl—Pd—N angles of approximately 89.95 and 90°. The average distances within the palladium complex for the two molecules are ∼2.031 Å for Pd—N and ∼2.309 Å for Pd—Cl.

Cadmium phosphates Cd2(PO4)OH and Cd5(PO4)2(OH)4 crystallizing in mineral structures

Single crystals of two basic cadmium phosphates, dicadmium orthophosphate hydroxide, Cd2(PO4)OH, and pentacadmium bis(orthophosphate) tetrakis(hydroxide), Cd5(PO4)2(OH)4, were obtained under hydrothermal conditions. Cd2(PO4)OH adopts the triplite [(Mn,Fe)2(PO4)F] structure type. Its asymmetric unit comprises two Cd, one P and five O sites, all situated at the general Wyckoff position 8 f of space group I2/a; two of the O atoms are positionally disordered over two sites, and the H atom could not be localized. Disregarding the disorder, distorted [CdO6] polyhedra form a tri-periodic network by edge-sharing with neighbouring [CdO6] units and by vertex-sharing with [PO4] units. The site associated with the OH group is coordinated by four Cd atoms in a distorted tetrahedral manner forming 1 ∞[(OH)Cd4/2] chains parallel to [001]. The oxygen environment around the OH site suggests multiple acceptor atoms for possible O—H...O hydrogen-bonding interactions and is the putative reason for the disorder. Cd5(PO4)2(OH)4 adopts the arsenoclasite [Mn5(AsO4)2(OH)4] structure type. Its asymmetric unit comprises five Cd, two P, and twelve O sites all located at the general Wyckoff position 4 a of space group P212121; the H atoms could not be localized. The crystal structure of Cd5(PO4)2(OH)4 can be subdivided into two main sub-units. One consists of three edge-sharing [CdO6] octahedra, and the other of two edge- and vertex-sharing [CdO6] octahedra. Each sub-unit forms corrugated ribbons extending parallel to [100]. The two types of ribbons are linked into the tri-periodic arrangement through vertex-sharing and through common [PO4] tetrahedra. Quantitative structure comparisons are made with isotypic M 5(XO4)2(OH)4 crystal structures (M = Cd, Mn, Co; X = P, As, V).

Synthesis and crystal structure of [1,3-bis(2,6-diisopropylphenyl)imidazol-2-ylidene](isocyanato-κN)gold(I)

The title complex, [Au(NCO)(C27H36N2)], was synthesized by ligand metathesis from [1,3-bis(2,6-diisopropylphenyl)imidazol-2-ylidene]gold(I) chloride and sodium cyanate in anhydrous tetrahydrofuran and crystallized from toluene at 233 K in the orthorhombic space group P212121, as a neutral complex with the central Au atom di-coordinated by an N-heterocyclic carbene [Au—C = 1.963 (2) Å] and an isocyanate [Au—N 1.999 (2) Å] ligands, with a linear CAuNCO moiety. The crystal packing is consolidated by C—H...O hydrogen bonds.

Die Serie caesiumhaltiger Thioarsenate(V) der Lanthanoide vom Formeltyp Cs3 Ln[AsS4]2 mit Ln = La–Nd und Sm

Abstract Cesium-containing thioarsenates(V) of lanthanoids with the composition Cs3 Ln[AsS4]2 can be prepared for Ln = La–Nd and Sm by the oxidation of the lanthanoid metals in the presence of orpiment (As2S3), cesium sesquisulfide (Cs2S3) and elemental sulfur (S). The reaction mixtures were handled under argon atmosphere and heated in fused silica ampoules to a moderate reaction temperature of 500 °C. Single crystals of this Cs3 Ln[AsS4]2 series appear as yellowish, transparent rods that are not stable to moist air and water. Their monoclinic crystal structure was determined from single-crystal X-ray diffraction data. The cesium-containing thioarsenates(V) Cs3 Ln[AsS4]2 with Ln = La–Nd and Sm crystallize isotypically with Rb3Sm[PS4]2 in the non-centrosymmetric monoclinic space group P21 with Z = 2. The lattice parameters range between a = 997–1015 pm, b = 699–703 pm, c = 1192–1195 pm and β = 90.2–90.4°. There are two crystallographically different As5+ cations and one unique Ln 3+ cation present, all coordinated by sulfur anions. Tetrahedral [AsS4]3− anions form two functionally different units working either as bridging units between three Ln 3+ cations or as terminal ligands for Ln 3+. [LnS8]13− polyhedra form ∞ 1 { [ Ln S 2 / 2 v S 6 / 1 t ] 11 − } ${}_{\infty }^{1}\left\{{[\mathit{Ln}{\mathrm{S}}_{2/2}^{\mathrm{v}}{\mathrm{S}}_{6/1}^{\mathrm{t}}]}^{11-}\right\}$ chains propagating along [010], which are separated by Cs+ cations with coordination numbers as high as C.N. = 9, 10 and 11. Surprisingly, the eighth interatomic distance d(Ln–S3) does not follow the lanthanoid contraction, but increases with decreasing ionic radius, changing the coordination polyhedron of Ln 3+ from a bicapped to a monocapped trigonal prism upon the transition from Nd to Sm, and causing a structural break in the crystal structure of this series. The results of Raman spectroscopic measurements on single crystals of Cs3La[AsS4]2 have confirmed the presence of [AsS4]3− tetrahedra as structural building blocks.

Preparation, spectroscopic, thermal properties, and laser performances of ordered Nd3+: Ca3TaGa2.1Al0.9Si2O14 crystal

Langasite crystals with an ordered structure of space group P321 are well known for their excellent piezoelectric and nonlinear optics performance. In this paper, a novel Nd3+: Ca3TaGa2.1Al0.9Si2O14 (Nd: CTGAS) crystal with an ordered structure of space group P321 was successfully grown using the Czochralski method, which could be used as self-laser photoelastic modulators. The thermal behaviour, polarized spectroscopy, and fluorescence lifetime were characterized in detail, and excellent spectroscopic and laser properties were presented. The full width at half of the maximum (FWHM) of the 0.8 μm absorption band was 23.5 nm for σ-polarized and 15.3 nm for π-polarized. The emission spectra had inhomogeneous broadening; the maximum emission cross-section was 7.50 × 10−20 cm2 at 1065 nm with FWHM of 14.3 nm and 2.35 × 10−20 cm2 at 1346 nm with FWHM of 28.3 nm. The fluorescence lifetime at 1065 nm was 280.8 μs. The diode-pumped continuous-wave (CW) laser operation at 1.06 μm was achieved in Nd: CTGAS crystal, an output power of 1.77 W was obtained at the absorbed pump power of 5.5 W, the slope efficiency was 35.0 %, and the optical conversion efficiency was 32.2 %. A 1.35 μm CW laser operation with a slope efficiency of 12.0 % was realized in z-cut Nd: CTGAS crystal.

Expression, purification, characterization and crystallization of Panax quinquefolius ginsenoside glycosyltransferase Pq3-O-UGT2

Pq3-O-UGT2, derived from Panax quinquefolius, functions as a ginsenoside glucosyltransferase, utilizing UDP-glucose (UDPG) as the sugar donor to catalyze the glycosylation of Rh2 and F2. An essential step in comprehending its catalytic mechanism involves structural analysis. In preparation for structural analysis, we expressed Pq3-O-UGT2 in the Escherichia coli (E. coli) strain Rosetta (DE3). The recombinant Pq3-O-UGT2 was purified through Ni-NTA affinity purification, a two-step ion exchange chromatography, and subsequently size-exclusion chromatography (SEC). Notably, the purified Pq3-O-UGT2 showed substantial activity toward Rh2 and F2, catalyzing the formation of Rg3 and Rd, respectively. This activity was discernible within a pH range of 4.0–9.0 and temperature range of 30–55 °C, with optimal conditions observed at pH 7.0–8.0 and 37 °C. The catalytic efficiency of Pq3-O-UGT2 toward Rh2 and F2 was 31.43 s−1 mΜ−1 and 169.31 s−1 mΜ−1, respectively. We further crystalized Pq3-O-UGT2 in both its apo form and co-crystalized forms with UDPG, Rh2 and F2, respectively. High-quality crystals were obtained and X-ray diffraction data was collected for all co-crystalized samples. Analysis of the diffraction data revealed that the crystal of Pq3-O-UGT2 co-crystalized with UDP-Glc belonged to space group P1, while the other two crystals belonged to space group P212121. Together, this study has laid a robust foundation for subsequent structural analysis of Pq3-O-UGT2.

Synthesis, Crystal structure, weak interactions and Optical Properties of An Organic Charge-Transfer Compound―Benzyl 2-Aminopyridinium Picrate

In this work, a new organic charge-transfer compound, 1-benzyl 2-aminopyridinium picrate, [Bz-2-NH2Py][PIC](1), was prepared and characterized by single crystal X-ray diffraction (SC-XRD), power X-ray diffraction (PXRD), FT-IR, 1HNMR and Raman spectroscopy. The title compound crystallizes in monoclinic system with space group P2(1)/c, and contains one [Bz-2-NH2Py]+ cation and one [PIC]− anion. The cations stack into a columnar structure through C–H···π interactions and the N-H∙∙∙O and C-H∙∙∙O hydrogen bonds between the anions and cations stabilize the crystal stacking of [Bz-2-NH2Py][PIC](1). The frontier molecular orbitals HOMO and LUMO were computed with DFT (using B3LYP/6-31Gþ(d, p) basis set) approach to understand the chemical reactivity and kinetic stability of the title compound. The geometrical parameters obtained from XRD experiment are good in agreement with the simulated values from single crystal structure. In addition, the organic material shows two main emission peaks about 390 and 469 nm upon excitation at 241 nm in solid state at room temperature. Hirshfeld surface analysis was performed to quantify the contributions of the different intermolecular interactions.

Influence of proline and hydroxyproline as antimicrobial and anticancer peptide components on the silver(I) ion activity: structural and biological evaluation with a new theoretical and experimental SAR approach.

Silver(I) complexes with proline and hydroxyproline were synthesized and structurally characterized and crystal structure analysis shows that the formulas of the compounds are {[Ag2(Pro)2(NO3)]NO3}n (AgPro) (Pro = L-proline) and {[Ag2(Hyp)2(NO3)]NO3}n (AgHyp) (Hyp = trans-4-hydroxy-L-proline). Both complexes crystallize in the monoclinic lattice with space group P21 with a carboxylate bidentate-bridging coordination mode of the organic ligands Pro and Hyp (with NH2+ and COO- groups in zwitterionic form). Both complexes have a distorted seesaw (C2v) geometry around one silver(I) ion with τ4 values of 58% (AgPro) and 51% (AgHyp). Moreover, the results of spectral and thermal analyses correlate with the structural ones. 1H and 13C NMR spectra confirm the complexes species' presence in the DMSO biological testing medium and their stability in the time range of the bioassays. In addition, molar conductivity measurements indicate complexes' behaviour like 1 : 1 electrolytes. Both complexes showed higher or the same antibacterial activity against Bacillus cereus, Pseudomonas aeruginosa and Staphylococcus aureus as AgNO3 (MIC = 0.063 mM) and higher than silver(I) sulfadiazine (AgSD) (MIC > 0.5 mM) against Pseudomonas aeruginosa. In addition, complex AgPro exerted a strong cytotoxic effect against the tested MDA-MB-231 and Jurkat cancer cell lines (IC50 values equal to 3.7 and 3.0 μM, respectively) compared with AgNO3 (IC50 = 6.1 (5.7) μM) and even significantly higher selectivity than cisplatin (cisPt) against MDA-MB-231 cancer cell lines (SI = 3.05 (AgPro); 1.16 (cisPt), SI - selectivity index). The binding constants and the number of binding sites (n) of AgPro and AgHyp complexes with bovine serum albumin (BSA) were determined at four different temperatures, and the zeta potential of BSA in the presence of silver(I) complexes was also measured. The in ovo method shows the safety of the topical and intravenous application of AgPro and AgHyp. Moreover, the complexes' bioavailability was verified by lipophilicity evaluation from the experimental and theoretical points of view.

Synthesis, Growth, and Characterization of Structural, Optical, and Nonlinear Optical Properties of L‐Proline Tartrate Added by Lanthanum Chloride Single Crystal

L‐proline tartrate (LPT), 1 and 2 mol% of lanthanum chloride‐ (LaCl3‐) doped LPT single crystals have been synthesized and grown using a slow evaporation solution method at room temperature. The crystals have undergone different characterization studies to test their suitability for device fabrication. The single crystal X‐ray diffraction studies have revealed that both 1 and 2 mol% of LaCl3‐doped LPT single crystals have been crystalized monoclinic crystal structure and space group P21. The UV‐Vis‐NIR spectrum analysis has shown that pure, 1, and 2 mol% of LaCl3‐doped LPT single crystals have good optical transparency in the entire visible and near IR region. The optical band gap energy for pure, 1 and 2 mol% of LaCl3‐doped LPT single crystals to be 4.9, 5, and 5.1 eV, respectively. The energy dispersive X‐ray analysis confirmed that LaCl3 has been incorporated into LPT crystal. The second harmonic generation (SHG) efficiency for 1 and 2 mol% of LaCl3‐doped LPT single crystals has been tested and found to be 1.27 and 1.6 times greater than that of the reference KDP crystal, respectively.

L-Cysteine oxalates with dimeric and trimeric cations

Single crystals of two new compounds, (l-CysH···l-Cys)(HC2O4) (I) and (l-CysH···l-Cys···l-CysH)(HC2O4)2·0.5H2O (II), were obtained. Crystal structures were solved and refined using single-crystal X-ray diffraction, and compared with the previously known orthorhombic and monoclinic modifications of the simple salt (l-CysH)(HC2O4). Compound (I) crystallizes in the triclinic crystal system (space group P1, Z=2) and contains (l-CysH···l-Cys) dimeric cations with very short O···O interatomic distance of 2.434(2) Å. Hydrogen oxalate anions form head-to-tail type chains with very short hydrogen bonds, characterized by O···O distances of 2.422(2) Å and 2.417(3) Å. The crystal lattice of (II) is monoclinic with the space group C2, Z=4. It contains a new type of cation, that has never been observed before for cysteine salts, i.e. trimeric (l-CysH···l-Cys···l-CysH) cation. Protonated l-cysteinium cations are connected to the zwitterionic l-cysteine moiety through the same oxygen atom of the carboxylate group via hydrogen bonds, with O···O distances of 2.6410(18) Å and 2.4888(19) Å. Similar to the structure (I), the hydrogen oxalate anions form head-to-tail type chains linked by short hydrogen bonds with O···O distances of 2.4369(17) Å and 2.4330(17) Å, respectively. The crystals were characterized by IR and Raman spectroscopy. The batches obtained on crystallization were also characterized by X-ray powder diffraction, in order to check the phase purity of all the sample.

Amine-directed synthesis, valence state control, and optical properties of two new organic-inorganic tin chlorides.

Two organic-inorganic tin chlorides, namely (C9H26N3Cl)SnCl4 (1) and (C9H26N3Cl)SnCl6 (2), were prepared via valence state control using N,N,N',N'',N''-pentamethyldiethylenetriamine as a structure-directing agent. The two compounds have zero-dimensional structures crystallized in non-centrosymmetric orthorhombic space group Cmc21 and P212121, respectively. In compound 1, the divalent tin ion forms a seesaw coordination configuration with four chloride ions, whereas in compound 2, the tetravalent tin ion forms an octahedral coordination configuration with six chloride ions. The two compounds show a moderate second-harmonic generation response under 1064 nm laser irradiation. Notably, compound 2 displays a bright orange luminescence with a photoluminescence quantum yield of 19.67%. Theoretical calculations were performed to gain insights into the optical properties of the two compounds.

L-Cysteinium…l-cysteine phosphite

In the system l-cysteine-H3PO3-H2O, a new salt with a dimeric cation, (l-CysH···l-Cys)(H2PO3), has been obtained. The compound exhibits incongruent solubility and is synthesized using an equimolar ratio of l-cysteine and phosphorous acid. It crystallizes in the orthorhombic space group P212121. The dimeric (l-CysH···l-Cys) cation is formed due to a strong O-H···O hydrogen bond with an O···O distance of 2.498 (2) Å. Phosphite anions in the structure are linked to infinite chains. An IR spectrum is recorded and discussed based on its structure.

Crystal structure of KMnPO4F with short- and long-range order inside the layered magnetic system.

Potassium manganese fluoride phosphate, KMnPO4F, has been obtained through mild hydrothermal synthesis and characterized by scanning electron microscopy, microprobe analysis and X-ray diffraction. The compound possesses an orthorhombic symmetry and chiral space group P212121 with a = 4.7884(2), b = 9.0172(4), c = 9.5801(4) Å, and Z = 4. Its crystal structure is composed of Mn3+O4F square pyramids sharing vertices with PO4 tetrahedra. This anionic framework is neutralized by K+ cations. As the temperature decreases, a short-range correlation state (Tmax ∼ 35 K) of KMnPO4F is formed, followed by the establishment of antiferromagnetic (AFM) long-range order at TN = 25 K. The latter is marked by sharp λ-type anomalies in both Fisher's specific heat d(χ‖T)/dT and heat capacity Cp. Pulsed magnetic field measurements on the single crystals identify the a axis as the easy magnetic axis and reveal a spin-flop transition at μ0Hspin-flop = 19 T. Density functional theory indicates that in variance with the three-dimensional network of KMnPO4F, it is a two-dimensional Ising magnetic system represented by buckled layers of integer spins S = 2 of Mn3+ ions. The strongest AFM exchange interaction, J1 ∼ -13 K, couples Mn3+ ions into linear chains running along the a axis. The chains themselves are ferromagnetically connected (J3 ∼ -4 K) within the ab plane. The interplane AFM exchange interaction (J2 ∼ -1 K) is weak and frustrated.

A homochiral tartrate-bridged dinuclear chromium(III) complex anion with a resonance-assisted hydrogen bond for proton conduction.

The synthesis of a homochiral building block based on L-tartrate-chromium(III) complex anions is reported. The dinuclear complex anion, which contains two bridging L-tartrate ligands and one aromatic N-donor ligand coordinated to chromium(III) ions, exhibits a boat conformation in which intramolecular resonance-assisted hydrogen bonding is present. The sodium L-tartrate-chromium(III) compound with the formula Na[Cr2(bpy)2(L-tart)2H]·9H2O (1) crystallizes from a methanol-water solution as a high water content material in the monoclinic space group P2. The as-synthesized compound is only stable at high relative humidity and undergoes structural transformations during drying, which are accompanied by water loss. However, these transformations are reversible and upon wetting, the material returns to its high water content structure. Based on a combination of experimental techniques (PXRD, in situ ATR-FTIR and EPR spectroscopy), the structure of the complex anions appears to be insensitive to the humidity variable processes (wetting and drying). Due to the presence of several hydrogen acceptor and donor groups in the L-tartrate-chromium(III) complex anion, we investigated the proton transport properties of a sodium L-tartrate-chromium(III) compound by impedance spectroscopy under dry and wet conditions at different temperatures. Since the relative humidity affects the structural transformations in this system, it also has a large influence on the proton conductivity, which varies by up to four orders of magnitude depending on the degree of hydration. These results confirm that the proton conductivity can be tuned in flexible structures in which non-covalent interactions determine the crystal packing.