Source Of Oil Research Articles

ANIMATED CHARACTERS OF SASA AND WIWIT IN PUBLIC SERVICE ADVERTISEMENTS AS INFORMATION ON THE BENEFITS OF OIL PALM BY BPDPKS (PALM PLANTATION FUND MANAGEMENT AGENCY)

Palm oil is an important industrial crop as a source of cooking oil, industrial oil and fuel. Indonesia, as the world's largest producer, plays a strategic role in the global economy with the palm oil sector providing millions of jobs. However, smear campaigns regarding palm oil from other countries have become a controversial issue. The Palm Oil Plantation Fund Management Agency (BPDPKS) plays a role in spreading positive information about palm oil, including through public service advertisements that use 2D animation. In this advertisement, the characters Sasa and Wiwit are used as icons to convey information about the benefits of palm oil to the public. This research aims to analyze the animated characters Sasa and Wiwit in BPDPKS Public Service Advertisements which use 2D animation. This analysis is important to understand how an animated character can convey an effective message or information to the public.

Timing of hydrocarbon charge in the Axial Zone of the Eastern Cordillera, Colombia

The petroleum potential of onshore basins in Colombia has been partly controlled by the Andean Orogeny since the end of the Cretaceous. Its Axial Zone has at least one understudied active petroleum system with a rather low petroleum potential and few commercial medium to heavy oil accumulations, raising questions about how the Andean deformation influenced the petroleum system and the possible undiscovered accumulations. We examine the timing of this petroleum system in the Axial Zone through oil–source correlations and two 2D petroleum system models across the Boyacá and Soápaga faults based on cross-sections. Modelling reveals the direct control of deformation on generation–accumulation in the Axial Zone, where the Lower Cretaceous source rocks, due to high heat flows during the synrift phase, started generation so early (100 to 60 Ma) that no reservoirs or traps were yet available to allow hydrocarbon entrapment and accumulation. Equally, for the younger Upper Cretaceous source rocks, the tectonic inversion of the basin between 33 and 23 Ma along the Boyacá and Soápaga faults interrupted burial and the maturation in most parts of the basin, leaving only local pods of active source rocks where maturation continues today due to the tectonic overburden along the footwall of the Soápaga Fault. The latter is thus the major kitchen, contributing more than 50% of the liquid hydrocarbons trapped mainly in Upper Cretaceous and Paleocene sandstones. Hydrocarbons migrate upwards where biodegradation and water washing occurred in the near-surface, giving rise to the many tar sand occurrences in the Eocene sandstones.

Research advances on the hard seededness trait of soybean and the underlying regulatory mechanisms.

Soybean is one of the world's most economically significant crops and is widely utilized as an essential source of vegetable protein and edible oil. Cultivated soybean is domesticated from its annual counterpart, wild soybean, which is considered valuable germplasm for soybean breeding. However, wild soybean accessions generally produce seeds with impermeable coats, a trait known as hard seededness (HS), which is beneficial for long-term seed survival but is undesirable for the uniform water absorption and germination of seeds, thus limiting the utilization of wild soybeans in breeding. In addition, moderate HS can isolate the embryo from the surrounding environment and is thus beneficial for long-term seed storage and germplasm preservation. The HS trait is primarily associated with the structure and chemical composition of the seed coat. Moreover, its development is also influenced by various environmental conditions, such as water and temperature. Genetic analysis has revealed that HS of soybean is a complex quantitative trait controlled by multiple genes or minor quantitative trait loci (QTL), with many QTLs and several causal genes currently identified. Investigating the physiological and molecular mechanisms underlying this trait is crucial for soybean breeding, production, and food processing. For this article, the literature was reviewed and condensed to create a well-rounded picture of the current understanding of internal and external factors, QTLs, causal genes, and the regulatory mechanisms related to the HS of soybean, with the aim of providing reference for future research and utilization of this trait.

The Effects of Flax and Mustard Seed Inclusion in Dairy Goats’ Diet on Milk Nutritional Quality

Our study evaluated the impact of incorporating flax seeds or a flax and mustard seeds’ mixture into goats’ diets to enhance milk polyunsaturated fatty acids (PUFAs). The incorporation of mustard seeds also aimed to slow the lipid oxidation process. A three-week feeding trial was conducted on 18 lactating goats, randomly distributed in three groups: control (C), FS (replacing 12% of the oil source with flax seeds), and FMS (replacing a quarter of flax seeds with mustard seeds). Flax seed inclusion improved the quality of milk fat by reducing saturated fatty acid concentration (p = 0.004) and increasing PUFA levels (p = 0.001). Both experimental groups significantly lowered the omega 6/omega 3 fatty acid ratio (p < 0.001). The FMS group showed a significantly higher total vitamin E concentration (p = 0.007). The fat oxidation parameters revealed that after 24 h of storage at room temperature, the p-anisidine value increased for the FS group compared to the C group, while the FSM group showed no significant difference, suggesting that the combined inclusion of flax and mustard seeds may prolong milk storage time by mitigating secondary oxidation products. This highlights the potential benefits of incorporating the studied seeds into goats’ diets for improving milk quality and extending its shelf life.

Oil-source correlation in the Yangjiang Uplift, South China Sea: A comparative analysis of mathematical and fingerprint methods

In recent years, significant exploration breakthroughs have been achieved in the Yangjiang Uplift. However, the source of crude oil is ambiguous, and the prevailing view suggests a remote hydrocarbon supply. To clarify the source of the crude oil in the Yangjiang Uplift, 30 source rocks and 15 crude oil samples collected from the Wenchang A Sag and Yangjiang Uplift are subjected to Rock-Eval pyrolysis, maceral analysis, vitrinite reflectance, and biomarker analysis, among other experiments. Principal component analysis and hierarchical cluster analyses are performed. The results indicate that the source rocks in the Yangjiang Uplift exhibit robust hydrocarbon-generating potential, with S1 + S2 values ranging between 0.04 and 140.5 mg/g (averaging: 13.54 mg/g), indicative of reaching the oil generation period. Using 13 biomarker compounds, two types of biomarkers are selected to compare the sources of the crude oils: pristane/phytane (Pr/Ph) representing the depositional environment and tricyclic terpanes (TTs) representing the source input. The crude oil in the Yangjiang Uplift can be divided into two types: one with high values of bicadinane-T (T)/C30 hopane and ΣC30-4 methyl sterane/ΣC29 regular sterane and another with a low ratio of (C19TT + C20TT)/C23TT according to the charting method. The investigated crude oil is mixed with the source rocks of the Wenchang A Sag and the Yangjiang Uplift. Furthermore, owing to the differences in the mixing ratios, the crude oil in the study area exhibits two distinct characteristics. Type A is characterized by a higher proportion of the Wenchang A Sag crude oil in the mixture, whereas type B is characterized by a higher proportion of local crude oil. This study establishes that the Yangjiang Uplift boasts large petroleum resources.

Assessing the Implications of the Red Sea Conflict on the Indian Supply Chain: A Comprehensive Analysis

The Red Sea, a vital trading route for India, is disrupted by the ongoing conflict between the Houthi rebels and Israel. This study aims to investigate how the dispute affects India’s supply chain in several different industries. The possible repercussions include restricted access to raw materials, delays and higher prices in maritime transportation, and concerns of energy scrutiny from disruptions in gas and oil. To lessen the impact on the economy we examine alternate trade routes and assess the potential effects on investors’ confidence. This study aims to examine and assess the diverse repercussions of the Red Sea War on the Indian supply chain offering insights on strategic planning, policy decisions and risk mitigation measures for the Indian government, businesses and stakeholders. The Red Sea crisis has had a multifaceted impact on different sectors of the Indian economy. In the healthcare sector, a huge number of medical supplies and prescription drugs which are transported via sea have seen a spike in the shipping cost due to rerouting which has disrupted the medical supply chain. On the other hand, there is no direct impact on the consumer sector; however, the increased freight prices and geopolitical concerns impact the wholesale price index which is expected to hike and influence the food grain prices and exports of basmati rice in particular owing to the well-established domestic supply chain. The FMCG industry is comparatively protected from the adverse effects of the crisis in contrast to industries such as agricultural and maritime foods. This crucial route, particularly affecting goods moving between Europe, North Africa, and the Middle East, historically used for nearly half of India's exports and a third of imports, is now deemed unsafe. Ships are being rerouted around Africa's Cape of Good Hope, leading to a 30% increase in transit times and a surge in shipping costs. Indian companies are feeling the heat – Arvind Ltd. faces lost revenue due to order backlogs, while exporters like Euro Fruits grapple with quadrupled freight costs and declining grape quality. The auto industry is also impacted, with companies like MG Motor India experiencing delays and rising logistics expenses. India’s energy, resources and industrial sectors have all been severely disrupted by the Red Sea crisis with critical exports including chemicals and petroleum products being heavily impacted. Since the Suez Canal handles a significant amount of India’s import of crude oil, rerouting owing to continual conflicts presents logistical difficulties and possible inflationary pressures. The government is actively engaging in efforts to mitigate these impacts by looking into alternative shipping lanes and providing assistance to affected exports. The possibility of delays and financial costs is still a major issue for businesses navigating obstacles relating to insurance premiums and logistical difficulties. To navigate these challenges, the Indian government is exploring a multi-pronged approach. Financial support in the form of direct subsidies, soft loans, and government-backed cargo insurance could help businesses offset increased costs and mitigate risks associated with delays and rerouting. Additionally, India is looking to diversify its trade routes by exploring alternative sources for crude oil and LNG imports, along with utilizing ports outside the conflict zone. Long-term solutions are also being considered, such as investing in the Northern Sea Route and expanding land transport infrastructure. Renewed focus on the India-Middle East-Europe Economic Corridor (IMEC) project could offer a comprehensive network connecting India, the Middle East, and Europe. By implementing these strategies, India can build a more resilient supply chain and minimize the long-term impact of the Red Sea conflict on its trade.

Development of Static Test Equipment and a System for Lever-Loaded Air Springs

In light of the heavy load applied by traditional air spring test equipment and its complex structural system design, a lever-type torque loading air spring test system is designed. It adopts the principle of Chinese scales to apply the load on the air spring in the form of proportional amplification, which can apply a simulated load on the air spring of 500–800 kg, using the vertical sliding shaft as the transverse limit to make the air spring elongate and compress by 280 mm in the longitudinal direction. The measurement and control system of the test equipment is then developed based on the LabVIEW platform, and the required sensors are selected and installed. The system can achieve real-time data acquisition of the air pressure, load, height and other parameters of the air spring and air spring charging and discharging control. Following the debugging of the function of the test equipment, the function of each subsystem is normal and able to meet the requirements of air spring characteristic and pressure tightness tests. For small spaces, such as laboratories, by reducing the installation of hydraulic and other oil source systems, avoiding the use of large mass blocks to simulate the loading of air spring loads and optimizing the complex installation and debugging process, this miniaturized design for air spring test equipment has benefits for practical applications.

Characterization of microstructural evolution of asphalt due to water damage using atomic force microscopy

Water erosion significantly impacts the microstructure of asphalt, which in turn affects the macroscopic performance of asphalt mixtures, such as reducing the adhesion between asphalt and aggregates as well as diminishing water stability. This study utilizes atomic force microscopy (AFM) to investigate the micromorphology, surface height distribution, nanosurface roughness, and microsurface energy of asphalt under different water immersion durations. Furthermore, it considers the influence of asphalt's penetration grade, oil source, and modifiers on the evolution of its microstructure. AFM analysis reveals that, with the exception of crumb rubber modified asphalt (PJ90/CR), the quantity and area of beelike structures in the asphalt decrease with increasing water immersion time. The surface height distribution of asphalt exhibits characteristics of an approximate normal distribution, with an increase in nanoscale heights over time due to the dissolution of surface components by water and physical erosion effects. Notably, the surface height of PJ90/CR and SBS modified asphalt (PJ90/SBS) is significantly lower than that of PJ90 before and after water immersion. Water damage causes asphalt surface particles to dissolve and re-aggregate, forming distinct nano-protrusions and pits, thereby increasing the asphalt's roughness. Among them, the roughness of SK90 are generally higher than those of SK70, with the average roughness (Ra) and peak-to-valley roughness (Rt) increasing by 28.93 % and 60.56 %, respectively, before immersion. Moreover, water damage leads to a decrease in the surface energy of asphalt to varying degrees, indicating that water more easily penetrates the asphalt film through adsorption and diffusion actions, altering its microstructure and, consequently, reducing its surface energy. The variations in the microstructure of SK90, Shell90, and PJ90 under different water immersion durations highlight the significance of oil source on asphalt performance.

Incorporating Culture-Independent Methods to Identify Net Syndrome-Associated Fusarium Species in Peanuts

Peanuts ( Arachis hypogaea) are of significant agricultural importance due to their versatile uses, providing a valuable source of edible oil and protein-rich food products and serving in industrial applications. Peanuts are susceptible to various diseases, one of them being net syndrome, a poorly understood threat triggered by an undefined causal agent, with symptoms including black coloring and lesions of the peanut pod that affect product quality. In this study, amplicon sequencing was harnessed to explore the fungal and bacterial populations associated with the syndrome. Using this approach, we identified a specific Fusarium sp. amplicon sequence variant that demonstrated a significant correlation with the presence of net syndrome symptoms in both young and mature peanuts. This finding was further validated by Koch's postulates testing, including isolation, cultivation, and application of this strain to corroborate its involvement in net syndrome in peanuts. Our findings contribute to a better understanding of the interactions between peanuts and their microbial communities and to identification of the previously undetermined agent involved in net syndrome and the etiology of the disease.

Femtosecond laser ablation responses of kerogen-rich, argillaceous, and bituminous shale rocks

Shale rocks have become one of the major sources of natural gas and oil. Laser drilling has emerged as a promising technique that can be incorporated into horizontal drilling and hydraulic fracturing processes. In this study, we selected three types of shales (kerogen-rich, argillaceous, and bituminous) with distinct compositions and microstructures and performed femtosecond laser irradiation with different power and energy to investigate their ablation characteristics. Evidence of melting and solidification was observed in all samples, despite the ultra-high pulse frequency of the femtosecond laser. Among the three types of shale rocks, the kerogen-rich shale exhibited the highest ablation rate, while argillaceous and bituminous shale showed lower and comparable rates. The above observations highlight the significance of shale chemistry in influencing laser ablation characteristics under femtosecond laser irradiation. Furthermore, no ablation rate anisotropy was observed when irradiating the samples parallel with and perpendicular to the bedding direction, although shale rocks are microstructurally and mechanically anisotropic.

Promising New Methods Based on the SOD Enzyme and SAUR36 Gene to Screen for Canola Materials with Heavy Metal Resistance.

Canola is the largest self-produced vegetable oil source in China, although excessive levels of cadmium, lead, and arsenic seriously affect its yield. Therefore, developing methods to identify canola materials with good heavy metal tolerance is a hot topic for canola breeding. In this study, canola near-isogenic lines with different oil contents (F338 (40.62%) and F335 (46.68%) as the control) and heavy metal tolerances were used as raw materials. In an experiment with 100 times the safe standard values, the superoxide dismutase (SOD) and peroxidase (POD) activities of F335 were 32.02 mmol/mg and 71.84 mmol/mg, while the activities of F338 were 24.85 mmol/mg and 63.86 mmol/mg, exhibiting significant differences. The DEGs and DAPs in the MAPK signaling pathway of the plant hormone signal transduction pathway and other related pathways were analyzed and verified using RT-qPCR. SAUR36 and SAUR32 were identified as the key differential genes. The expression of the SAUR36 gene in canola materials planted in the experimental field was significantly higher than in the control, and FY958 exhibited the largest difference (27.82 times). In this study, SOD and SAUR36 were found to be closely related to heavy metal stress tolerance. Therefore, they may be used to screen for new canola materials with good heavy metal stress tolerance for canola breeding.

Insights into date seed oil composition: Geographical variability and potential applications

AbstractDate fruit (Phoenix dactylifera L.) processing generates substantial quantities of date seeds, constituting a potential source of valuable oil yet currently considered waste. This study aimed at characterizing date seed oil (DSO) as a prospective approach for date seed valorization while investigating the influence of geographical origin on its composition. Samples from three Moroccan palm groves (Allougoum, Alnif, and Errachidia) and four non‐Moroccan samples were analyzed. Liquid and gas chromatography were applied to determine the chemical composition. The prevalent fatty acids were oleic acid (Ol), ranging from 40.8% to 50.2%, followed by lauric acid (La, 14.0%–24.2%), myristic acid (My, 9.0%–12.6%), palmitic acid (Pa, 9.0%–11.6%), linoleic acid (7.1%–10.7%), and stearic acid (St, 2.4%–4.8%). Major triacylglycerols identified included LaOlLa, LaOlMy, LaOlPa, LaOlOl, MyOlPa, MyOlOl, and PaOlOl. Notably, DSO contains significant tocochromanol (424–760 mg kg−1) and phytosterol content (3422–4827 mg kg−1), with specific phytosterols identified for the first time. Multivariate analysis employing principal component analysis and hierarchical cluster analysis, supplemented by heatmaps, underscored the influence of geographical origin on DSO composition. Moroccan samples exhibited distinctive profiles rich in St, Ol, Pa, PaOlSt, MyOlPa, PaOlPa, γ‐tocotrienol, and δ‐tocotrienol, leading to a differentiation from non‐Moroccan oils. Challenges in classifying DSO within selected Moroccan palm groves were discussed, emphasizing the necessity to consider major and minor compounds, along with date varieties, in geographical effect studies.Practical Applications: By delving into the chemical properties and potential applications of DSO, this research strives to contribute to sustainable and economically viable approaches for utilizing agricultural waste products.

Hydrocarbon expulsion mechanism of Lower Cambrian argillaceous source rocks in the Tarim Basin, China

The source of oil and gas in the Tarim Basin's platform has always been controversial. The Lower Cambrian Yurtusi Formation and the Xidashan Formation–Xishanbulak Formation argillaceous source rocks are an important set of oil source series in the basin. Based on the principle of conservation of matter, this paper calculates the hydrocarbon expulsion amount of the source rock. Using a phase state hydrocarbon expulsion amount characterization model, the paper reconstructs the evolution process of the hydrocarbon expulsion phase state of the source rock. According to the characterization model of hydrocarbon expulsion dynamics, the relative contribution of each force to hydrocarbon expulsion is evaluated. The hydrocarbon expulsion geologic model of argillaceous source rocks in the Lower Cambrian in the Tarim Basin is established. The results show that this set of source rocks can serve the main source rocks in the basin. The hydrocarbon expulsion of the Lower Cambrian argillaceous source rocks in the Tarim Basin can be divided into three stages. In the first stage, the hydrocarbon expulsion phase is dominated by the water‐soluble and diffusion phases. The conversion of clay minerals into dehydration and diffusion forces is the main driving force for the hydrocarbon expulsion. In the second stage, the oil and gas expulsion present the characteristics of multiphase and multidynamic coexistence. In the third stage, the phase state of oil and gas expulsion is mainly free phase. The capillary force difference and the thermal expansion force of the fluid rock are the main driving forces for oil and gas expulsion. The research results of this paper can deepen the understanding of the hydrocarbon expulsion mechanism of the set of source rocks, and then guide oil and gas exploration.

Potential of Streptomyces spp. From Peanut Plant Soil as an Entomopathogen of Pests Spodoptera Litura

Peanuts are agricultural commodities that have high economic value and play an important role in meeting human needs, namely as a source of vegetable protein, oil and other nutrients, but domestic peanut production has not been able to meet the needs of the Indonesian people. The national demand for peanuts reaches 856.1 thousand tons per year, and the average consumption of peeled peanuts is 0.32 kg per capita every year. [1] In 2013 peanut production was 701,680 tons, then there was a decrease in production in 2014 to 638,896 tons, and continued until 2015 to 605,449 tons, thus showing a 13.7% decrease that occurred from 2013 to 2015. Low productivity is caused by various factors, one of which is the attack of pests and plant diseases. This study aims to determine the type of Streptomyces spp. Microbes with high chitinolytic content that can control armyworm pests (S.litura) on peanut plants. and influence of biological control agency Streptomyces spp as an entomopathogen of insect pests S. litura. This study was able to improve understanding of the influence of the biological control agency Streptomyces spp as an entomopathogen of S. litura insect pests to protect plants in the future. The results of the exploration of Streptomyces sp. acquired Colonies are irregular and branched coccus-shaped. The colony is tightly attached to the GNA medium, wavy white with a notched surface and a starchy texture. In addition, it has the largest chitinase enzyme content with a chitin zone diameter of 3 cm. PCR test Based on BLAST® result tabulation data that isolates belong to the genus Streptomyces sp. with an identity percentage of 99.86% with Streptomyces sp. VEL gene 17 to 16 rRNA, partial sequence with access code AB914463.2 The highest mortality was in the treatment (S0 RP K3) and (S1 RP K3) there was 60% this showed that with the administration of Streptomyces sp. With a concentration of 75% can cause very high mortality with abdominal contact poison in S. Litura pests

Effect of SARA Fractions on Fatigue Properties of Hard Asphalt.

The fatigue performance of hard asphalt is an important factor that affects the service life of asphalt pavement. In order to comprehensively explore the influence of chemical components on the fatigue performance of hard asphalt, and to eliminate the chemical instability between the microstructure of asphalt from different oil sources, seven kinds of hard asphalt were designed and prepared with saturates, aromatics, resins, and asphaltenes (SARA) extracted from the same hard asphalt. Rheological, time sweep and linear amplitude sweep (LAS) tests were carried out to evaluate the fatigue properties. The results show that the complex modulus of asphalt binds increased rapidly with an increase of asphaltene and resins and that the colloidal structure was strengthened, which would increase the fatigue factor. In the time sweep test, the strength of the colloidal structure significantly affected the fatigue life, and the fatigue life was different under different test stresses. In the viscoelastic continuum damage (VECD) model, the cumulative damage was related to the modulus, while with the increase of asphaltene and resins, the fatigue life showed a trend of first increasing and then decreasing. The linear regression analysis showed that the fatigue life of hard asphalt had a good correlation with strain sensitivity. This study investigated the applicability of different fatigue evaluation methods and revealed the influence of four components on the fatigue properties of hard asphalt. The results provide significant insights in the improvement of the fatigue performance of both hard asphalt and corresponding mixtures.

Optimizing oil-source correlation analysis using support vector machines and sensory attention networks

Oil source correlation can be used to identify the origin of crude oil by linking crude oil to source rocks; however, the manual methods, which are limited by the sample or parameter quantity or imbalanced datasets, are facing uncertainties. Although the existing multivariate statistical techniques can alleviate this problem, they are facing difficulties in processing imbalanced datasets and quantifying source beds. Therefore, a novel oil-source correlation analysis model called SVM-SelectKBest combining a support vector machine (SVM) with a feature selection algorithm to mitigate the common issue of dataset imbalance in oil-source correlations is proposed in this paper. The SVM-SelectKBest offers advantages over normal SVM by dynamically selecting the most relevant features and fine-tuning model parameters to achieve higher accuracy and better generalizability in complex datasets. SVM compensates for class imbalances by heavily penalizing the misclassification of the minority class, and SelectKBest streamlines the feature set to enhance SVM's effectiveness on critical variables. Furthermore, a shallow neural network (SensoryAttentionNet) is introduced into the proposed model to address the issue of quantifying the source bed proportions in crude oil. The result show that SVM-SelectKBest has better performance in identifying key geochemical parameters and discriminating oil source correlation, its accuracy in unbalanced datasets is improved by near 40% compared to SVM. The model obtains 25 key geochemical parameters such as C17 n-heptadecane, Pr pristane, and C18 n-octadecane, it achieves F1 scores of 1.0 on the training, validation, and test sets. SensoryAttentionNet also performs robustly, with a low variance of 0.05 between its predicted and actual values. All the results indicate the effectiveness of the proposed method in dealing with the imbalance problem in oil-source source correlation datasets and in determining the proportional contribution of source beds in crude oil.

Nutritional profile, LC-PDA/ESI-MS analysis, antioxidant, and anti-enzymatic activities of hydromethanolic extracts of three Ficus carica varieties from Moroccan Pre-Rif-Taza

This research work explores the nutritional composition of three varieties of Ficus carica dried fruits. For such a task, the phenolic profile of their hydromethanolic extracts was evaluated along with their in vitro antioxidant, antidiabetic, and anti-inflammatory effects. The proximate analysis showed that the three dried fruits are a valuable source of vegetal oil (2.46–2.52 g/100 g), proteins (2.64–3.33 g/100 g), carbohydrates (84.21–86.07 g/100 g), and energy (372.04–377.00 kcal/100 g). Fatty acids composition revealed that dried fruits studied are rich in polyunsaturated fatty acids with a percentage of 37.89 ± 0.51 %, followed by saturated fatty acids (31.30 ± 0.61 %), and monounsaturated fatty acids (31.4 ± 1.22 %). Furthermore, mineral analysis indicated the presence of potassium (7922.54–10672.19 mg/kg), sulfur (4668–5788.72 mg/kg), calcium (3368.88–3939.64 mg/kg), magnesium (1015.48–1169.11 mg/kg), and phosphorus (838.20–868.65 mg/kg). LC-PDA/ESI-MS analysis revealed the presence of seven phenolic compounds with rutin as the most abundant compound (0.130–0.162 mg/g). Experimental antioxidant tests showed that hydromethanolic extracts have significant antioxidant activity with an IC50 values between 219 ± 2.7–307 ± 0.48 μg/mL for FRAP, 537 ± 1.88–821 ± 1.46 μg/mL for β-carotene bleaching, 724 ± 0.1–977 ± 2.36 μg/mL for ABTS, and 847 ± 0.04–1214 ± 0.23 μg/mL for DPPH tests. Likewise, the inhibition of antidiabetic and anti-inflammatory enzymes was significantly exerted by their hydromethanolic extracts. Based on the results achieved, Ficus carica fruits may be considered as a valuable source of nutrients making them an interesting functional food.

Diallel analysis, maternal effect and heritability in groundnut for yield components and oil content

BackgroundGroundnut is one of the world's major food and oil crops. Being sources of nutrition and vegetable oil, rich in affordable and digestible protein, it is a strategic crop in Burkina Faso for food security, nutrition, and cash income. Understanding the nature of gene effect and genetic variation affecting yield and yield component traits will contribute to designing appropriate breeding methods for groundnut improvement and increase selection efficiency in Burkina Faso. MethodsIn 2018, a total of 30 F2 progenies were generated through a 6 x 6 full diallel mating using six different and contrasting varieties. In 2019, parents and progenies were evaluated in a lattice square design in 3 replications at ICRISAT-Mali experimental field to assess the general combining ability (GCA) and specific combining ability (SCA) effects, the inheritance and the maternal and reciprocal effects for yield component traits (YCT) and oil content (OC). ResultsSignificant variabilities were observed among the parental genotypes and their F2 progenies for DTH, PSR, HPW, PL, PWD, SL, SWD, and OAC. Mean performance of the six parents were HPW (117.05g), HSW (57.24 g), PYH (1914.76), SYH (1312.73), PL (2.52), PWD (1,19), SL (1.38), SWD (0.83), OC (49.43), OAC (50.43) and LAC (33.61). Parent QH243C presented the highest value for SWD (1.02 cm) and OAC (60.76) while the parent ICGV09195 had the highest value of OC (50.36). Chalimbana presented the highest value of HPW (169.61 g), PL (2.98 cm), PWD (1. 41 cm), and SL (1.57 cm) while CG7 presented the highest value for HSW (75. 14 g), and SYH (1639.28 kg). Both YCT and OC are controlled by additive and non-additive gene effects with a predominance of additive gene action for HSW, SL, and SWD, whereas HPW, PL, PWD, and OAC were found to be more controlled by non-additive gene effects. Maternal effects as well as nuclear and cytoplasmic interaction effects were observed for both YCT and OC indicating that YCT and OC are influenced by a combination of genetic factors from both the maternal parent and the nuclear genome, as well as cytoplasmic factors such as mitochondrial DNA. Broad sense heritability ranged from 3.76 % to 91.56 %, and higher broad sense heritability values were recorded for pod length (91.56 %), hundred pod weight (83.71 %) and pod width (80.95 %). ConclusionThe study yields valuable insights into the inheritance of YCT and OC. The parents, Chalimbana and CG7, showed promise as good combiners for both yield component traits and oil content when used as male parents while TE3, Sh470P and QH243C can be used as female for the oil content and its components (oleic and linoleic content).

Factors that Affect the Quality of Olive Oil Produced Using Olives from Traditional Orchards in the Middle East

Traditional olive (Olea europaea) orchards have been grown for thousands of years and still occupy most of the world’s cultivated olive areas. To compete with olive oil produced in the higher-yielding intensive orchards, the oil from traditional orchards must be of high quality. We evaluated oil quality—potential and actual (under commercial conditions)—and tested the stages in the production chain that are likely to reduce oil quality in the traditional sector in the Middle East region. Our findings show a clear negative impact of growers’ traditional practices on both the chemical and sensory characteristics of olive oil. The oil originating from the commercial process had higher free fatty acid and lower polyphenol and carotenoid contents, lower stability, lower pungency, lower fruitiness, lower bitterness, and a higher prevalence of organoleptic defects than oil that originated from fruit picked from the same trees during the experimental procedure. The current common harvesting technique of pole beating significantly increased fruit injury and fruit with mold, leading to a reduction in oil polyphenols and an increase in free fatty acid levels compared with those resulting from manual picking. In addition, after harvest, storing the fruit for more than 48 hours in plastic bags dramatically reduced the oil quality. The traditional olive orchard could be a source of high-quality extra virgin olive oil. However, fruit handling—from the trees until the end of the oil extraction process—is performed incorrectly, thus adversely affecting the oil quality.

Whole petroleum system in Jurassic coal measures of Taibei Sag in Tuha Basin, NW China

Based on the latest results of near-source exploration in the Middle and Lower Jurassic of the Tuha Basin, a new understanding of the source rocks, reservoir conditions, and source-reservoir-cap rock combinations of the Jurassic Shuixigou Group in the Taibei Sag is established using the concept of the whole petroleum system, and the coal-measure whole petroleum system is analyzed thoroughly. The results are obtained in three aspects. First, the coal-measure source rocks of the Badaowan Formation and Xishanyao Formation and the argillaceous source rocks of the Sangonghe Formation in the Shuixigou Group exhibit the characteristics of long-term hydrocarbon generation, multiple hydrocarbon generation peaks, and simultaneous oil and gas generation, providing sufficient oil and gas sources for the whole petroleum system in the Jurassic coal-bearing basin. Second, multi-phase shallow braided river delta–shallow lacustrine deposits contribute multiple types of reservoirs, e.g. sandstone, tight sandstone, shale and coal rock, in slope and depression areas, providing effective storage space for the petroleum reservoir formation in coal-measure strata. Third, three phases of hydrocarbon charging and structural evolution, as well as effective configuration of multiple types of reservoirs, result in the sequential accumulation of conventional-unconventional hydrocarbons. From high structural positions to depression, there are conventional structural and structural-lithological reservoirs far from the source, low-saturation structural-lithological reservoirs near the source, and tight sandstone gas, coal rock gas and shale oil accumulations within the source. Typically, the tight sandstone gas and coal rock gas are the key options for further exploration, and the shale oil and gas in the depression area is worth of more attention. The new understanding of the whole petroleum system in the coal measures could further enrich and improve the geological theory of the whole petroleum system, and provide new ideas for the overall exploration of oil and gas resources in the Tuha Basin.