Sources Of Metals Research Articles

Assessment and Source Analysis of Heavy Metal Pollution in Farmland Soil Around Tin Mine

Studying the status and source analysis of heavy metal pollution in farmland in typical mining and processing areas is an important prerequisite for promoting farmland soil ecological restoration and farmland protection in concentrated mining areas. In this study, the heavy metal content of farmland soil around a mining area in southwest China was detected, and the pollution status, distribution law, health risks, and sources of heavy metals were studied by using the land accumulation index method, comprehensive pollution index method, kriging interpolation method, health risk assessment method, and PMF receptor model on the sampling data. The results showed that the mean values of eight heavy metals in farmland soil except Ni exceeded the local soil background values, and the results of the ground accumulation index evaluation showed that Cd and Hg were extremely polluted； Pb and As showed medium pollution-heavy pollution； and Cr, Zn, Ni, and Cu were lightly polluted. In the health risk assessment, oral ingestion was the main exposure route posing a health risk to the human body； the main element that constituted non-carcinogenic health risks was As, and the carcinogenic risks were from As and Cd. PMF model analysis showed that the contribution rate of weathering natural sources of iron-bearing ore was 28.02%, and the main factors were Ca and Fe. The contribution rate of agricultural sources was 3.02%, and the main factors were Pb and As. The contribution rate of industrial and atmospheric deposition composite sources was 33.09%, and the main factor was Hg. The contribution rate of the parent material source was 17.27%, and the main factor was Ca. The contribution rate of mining activities such as mining and smelting was 18.60%, and the main factors were Zn and Cd.

Identification Priority Source of Heavy Metals in Urban Soils Based on Source-specific Ecological Risk Analysis in a Typical Tourist City

To understand the pollution status, distribution characteristics, and pollution sources of soil heavy metals in tourist cities in northwest China, the soil content of heavy metals As, Cd, Cr, Cu, Hg, Ni, Pb, and Zn in the main areas of Dunhuang City was collected and analyzed. The soil heavy metal pollution level was quantitatively evaluated by the methods of the geo-accumulation index and improved Nemerow pollution index, and the sources of heavy metal pollution were quantitatively analyzed using cluster analysis and the positive matrix factorization （PMF） model. The contribution rate of each pollution source to ecological risk was determined by combining the PMF model and comprehensive ecological risk index. The results showed that except for the mean contents of As and Ni, the mean contents of Cd, Cr, Cu, Hg, Pb, and Zn were all higher than the background values in Gansu Province. However, the average content of the eight elements was lower than the screening value of construction land in the Standard for Soil Pollution Risk Control of Soil Environmental Quality Construction Land （trial） （GB 36600-2018）. Among them, the enrichment of Cd, Pb, and Hg was more serious, and the exceedance rate was higher than 90%. The results of the geo-accumulation index indicated that urban soils were mainly polluted by Hg in the study area, and Cd, Cr, Cu, Pb, and Zn pollution also existed in different degrees. The improved Nemerow pollution index illustrated that the comprehensive pollution degree of the soil was clean to moderate pollution, and the overall pollution was light pollution. Based on the PMF model, we could conclude that soil heavy metals in the study area were affected by natural sources, industrial deposition sources, industrial sources, traffic sources, and comprehensive sources, and the contribution rates were 29.28%, 25.86%, 20.13%, 16.5%, and 8.23%, respectively. The specific source-integrated ecological risk assessment model found that the industrial deposition source contributed the most to the ecological risk in the study area and could be regarded as the priority control pollution source, and Hg was considered to be the priority control pollution element for ecological risk.

Isotopic and trace element record of changing metal source contributions to tropical freshwater Lake Naivasha (Kenya)

Lake Naivasha, Kenya's second-largest freshwater body is a wetland of international ecological importance and currently subjected to unprecedented anthropogenic influence. The study aims to chronologically reconstruct the main human activities and background weathering reactions that govern metal mobilizations into the lake and their potentially adverse effects on its ecological status. We combine extensive geochemical analyses (major, trace elements, Zn-Pb isotope ratios) in a dated lake sediment record and catchment rocks with remote sensing techniques. Downcore geochemical variations reflect natural ecosystem destabilizations occurring as early as the first half of the 20th century. These coincide with changes towards less radiogenic Pb-isotope values which persist towards the top of the core (206Pb/207Pb = 1.243 at core base ∼1843, to 206Pb/207Pb = 1.225 at ∼1978). We interpret the land-clearance for agricultural purposes on the Aberdare Range and documented early aviation activities as possible vectors of this early Pb-isotope excursion. The overlapping Pb-isotope signatures between sediment sources and anthropogenic contributions challenges a straightforward deconvolution of the two. Our conservative model calculations suggest, nevertheless, that an addition of up to ∼1.8 % Pb-gasoline influx to the total Pb flux, peaking in the 1980s is able to explain the Pb distribution trend. Homogeneous Zn-isotope compositions in sediments deposited until ∼1970s (δ66/64Zn = 0.216–0.225 ‰) do not follow major hydro-climatic events or anthropogenic forcing but likely reflect lake-specific natural cycling. Subsequent higher variations to both heavier (up to δ66/64Zn = 0.242 ± 0.005 ‰) and lighter (down to δ66/64Zn = 0.184 ± 0.003 ‰) Zn-isotope values are contemporaneous with intensification of large-scale horticultural industry in the catchment. Together with supporting indicators, the lighter Zn-isotope compositions in youngest analysed sediments (21st century) are attributable to increased biological productivity (algal blooms) and ongoing lake eutrophication. Our study demonstrates the applicability of the heavy metal isotope tool to reconstruct human influences on lake environments with complex geological settings such as the East African Rift System.

Heavy metals pollution characteristics, source analysis, and risk assessment in soil based on Geographic Information System: A case study of a typical area in Three Parallel Rivers of Yunnan Protected Areas, China

Three Parallel Rivers of Yunnan Protected Areas, which was listed as World Natural Heritage, was suffering from increasingly serious heavy metal pollution. However, the existing research on heavy metal pollution in the area was almost blank. This study collected 115 surface soil samples from the local area and used inductively coupled plasma optical emission spectroscopy (ICP-OES) to determine the content of local 12 kinds of heavy metals. Results indicated that mining the tungsten-beryllium mine has caused serious heavy metal pollution to the soil in nature reserves. It poses risks to ecology and human health that cannot be ignored. There was severe pollution of tungsten (W) (Igeo = 8.30) and beryllium (Be) (Igeo = 1.92) in the topsoil. Subsequently, applied the pollution index assessment, potential ecological risk assessment (PERI), human health risk assessment (HHRA), and positive matrix factorization (PMF) models in conjunction with geographic information system (GIS) mapping to systematically evaluate the potential hazards of heavy metals in an abandoned tungsten-beryllium, where located in Haba Snow Mountain Nature Reserve that’s the core area of “Three Parallel Rivers”. The PMF model and GIS mapping identified four factors, nature, transportation, mining, and miners living, as the main sources of local heavy metals. The HHRA results indicated no health risks in the study area, but the GIS mapping identified areas where there are. It is the gaps in the systematic study of heavy metal pollution in the core area of the “Three Parallel Rivers” that the results of the study supplement and provide reference data for controlling soil heavy metal pollution in tungsten-beryllium mining areas and valuable information for managers to develop pollution control and risk management strategies.

Geodynamic controls on clastic-dominated base metal deposits

Abstract. To meet the growing global demand for metal resources, new ore deposit discoveries are required. However, finding new high-grade deposits, particularly those not exposed at the Earth's surface, is very challenging. Therefore, understanding the geodynamic controls on the mineralizing processes can help identify new areas for exploration. Here we focus on clastic-dominated Zn–Pb deposits, the largest global resource of zinc and lead, which formed in sedimentary basins of extensional systems. Using numerical modelling of lithospheric extension coupled with surface erosion and sedimentation, we determine the geodynamic conditions required to generate the rare spatiotemporal window where potential metal source rocks, transport pathways, and host sequences are present. We show that the largest potential metal endowment can be expected in narrow asymmetric rifts, where the mineralization window spans about 1–3 Myr in the upper ∼ 4 km of the sedimentary infill close to shore. The narrow asymmetric rift type is characterized by rift migration, a process that successively generates hyper-extended crust through sequential faulting, resulting in one wide and one narrow conjugate margin. Rift migration also leads to (1) a sufficient life span of the migration-side border fault to accommodate a thick submarine package of sediments, including coarse (permeable) continental sediments that can act as source rock; (2) rising asthenosphere beneath the thinned lithosphere and crust, resulting in elevated temperatures in these overlying sediments that are favourable for leaching metals from the source rock; (3) the deposition of organic-rich sediments that form the host rock at shallower burial depths and lower temperatures; and (4) the generation of smaller faults that cut the major basin created by the border fault and provide additional pathways for focused fluid flow from source to host rock. Wide rifts with rift migration can have similarly favourable configurations, but these occur less frequently and less potential source rock is produced, thereby limiting potential metal endowment. In simulations of narrow symmetric rifts, the conditions to form ore deposits are rarely fulfilled. Based on these insights, exploration programmes should prioritize the narrow margins formed in asymmetric rift systems, in particular regions within several tens of kilometres from the paleo-shoreline, where we predict the highest-value deposits to have formed.

Fractionation and leaching of Cd, Cu, Fe, Pb, and Zn from smelter residues of an old environmental liability in Argentina

An integrated chemical and mineralogical characterization approach was applied to smelter wastes collected from 50-year-old dump sites in Argentina. Characterization included pseudo-total element concentrations, acid generation/neutralization potential, sequential extractions, pH-dependent leaching kinetics, and mineralogical analysis of all residues. These analyses provided detailed information on the reactivity of the minerals in the waste material and associated metal release. Cadmium and Zn were the elements of greatest environmental concern due to their high mobility. On average, the release of Zn and Cd in pH-dependent leaching essays reached 17.6% (up to 5.24 mg g−1) and 52.7% (up to 0.02 mg g−1) of the pseudo-total content, respectively. Moreover, Cd and Zn were also the metals that showed the higher proportions of labile fractions associated to the adsorbed and exchangeable fraction (60–92% for Cd and 19–38% for Zn). Since Cd and Zn concentrations in the residue are not high enough to form their own minerals, a large proportion of these elements would be weakly adsorbed on Fe oxyhydroxides. In contrast, the low release of Cu, Pb and Fe would be associated with these elements being incorporated into the crystalline structure of insoluble or very poorly soluble minerals. Lead is incorporated into plumbojarosite and anglesite. Copper was mainly in association with Fe oxyhydroxides and may also have been incorporated into the plumbojarosite structure. The latter could act as a sink especially for Pb under the acidic conditions of the smelter residue. Despite the elevated concentrations of Pb observed in the residue, it showed a very low mobility (≈0.1%), indicating that it is mostly stabilized. Nevertheless, the smelter residue is a continuous source of metals requiring remediation.

Magmatic evolution and sources of metals and fluids in the large granite-related Xiasai vein-type Ag–Pb–Zn(–Sn) deposit, northern Yidun terrane, SW China

The Xiasai Ag–Pb–Zn–(Sn) deposit in the northern Yidun terrane (eastern Tethys), hosted in Late Triassic metasandstones, is genetically associated with Late Cretaceous granites. We present chemical and Sr–Nd–Pb–Li–B isotope data of Late Cretaceous granites and their mafic microgranular enclaves (MME), late aplites, and Late Triassic metasedimentary rocks. The narrow range of 87Sr/86Sr99 (0.70627–0.70953) and εNd99 (–6.1 to –5.2) values of most Late Cretaceous granites reflects a mixed source with contributions from the mantle and Paleoproterozoic felsic crust. These granites have high SiO2 contents (>69 wt%) and strong depletions in Sr, Ba, and Eu. Major and trace element contents correlate with the fractionation index 1/TiO2, indicating that they experienced extensive fractionation. Local late aplite dikes were derived from similar source rocks, but seem to be younger.The Pb isotopic compositions reflect that the metal Pb was derived from the granite with variable contributions from the Late Triassic sedimentary rocks. Weakly and moderately altered metasandstones have similar δ7Li and δ11B values as most granites (δ7Li: 0.00 to 2.68 ‰; δ11B values: –14.93 to –12.36 ‰), indicating magmatic fluid sources. The magmatic fluids resulted in the initial enrichment of Sn, Cu, Pb, and Zn. Strong alteration of feldspar and biotite resulted in the metasandstones in negligible change of Li concentrations, significant loss of Sr, Na2O, CaO, MgO, and Fe2O3, but significant addition of B. This alteration lowered δ7Li from 1.01 to –3.65 ‰ and lowered δ11B from –9.43 to –19.18 ‰. The low δ7Li values and extremely low δ11B values reflect external fluids from the Late Triassic sedimentary wall rocks, which interacted with granites and mobilized metals (e.g., Sn, Ag, Pb, and Zn) from the granite and/or the sedimentary wall rocks. The location of the Xiasai deposit is controlled by regional NNW-trending faults induced by Late Cretaceous extension.

High-Entropy Prussian Blue Analogues as High-Capacity Cathode Material for Potassium Ion Batteries

Potassium ion batteries, due to their similar electrochemical principles to lithium-ion batteries and the abundance of metal sources, are considered one of the alternatives to lithium-ion batteries. The development of new cathode materials has always been a research focus in this field. Among them, Prussian blue materials, with their three-dimensional open and flexible metal framework structure, can efficiently and reversibly store potassium ions. However, Prussian blue cathode materials still face issues such as poor reversibility and low capacity, which limit their application scope. This study investigates the preparation of high-entropy Prussian blue analogues materials to enhance electrochemical performance. The doping of five different transition metals (Fe2⁺, Co2⁺, Cu2+, Ni2+, and Mn2+) sharing the same nitrogen coordination sites results in a configurational entropy greater than 1.5 R for the material. HEPB-1 cathode material (K1.75Mn0.26Fe0.01Ni0.01Cu0.08Co0.09 [Fe(CN)6]0.66·0.83H2O) shows better electrochemical performance, with the initial discharge capacity of 86.69 and 74.51 mAh g−1 (capacity retention is 75.2% after 100 cycles) at 20 and 100 mA g−1, respectively. The research results have provided new insights for the further development and application of potassium ion batteries.

Health Risk Assessment of Road-Dust-Bound Heavy Metals via Ingestion Exposure from One Typical Inland City of Northern China: Incorporation of Sources and Bioaccessibility

Heavy metals in road dust pose potential health risks to humans, while oral bioaccessibility and sources are all important factors influencing this health risk. However, few prior studies have combined them for health risk analysis. In this study, road dust samples were collected from different geographical locations of Jinan (west area, WA; central area, CA; and east area, EA) to analyze the source-specific and bioaccessibility-based health risks of heavy metals. The mean concentrations of heavy metals in the three areas were CA > EA > WA, with Cd, Cu, Mn, Pb, and Zn exceeding their corresponding background values. A source analysis using a Positive Matrix Factorization (PMF) model showed that traffic emissions were the main source of heavy metals in the WA and CA, while industrial activities were the main source in the EA. The mean bioaccessibility of heavy metals extracted using the Solubility Bioaccessibility Research Consortium (SBRC) method followed the order of Cd (75.5%) > Zn (42.2%) > Mn (42.1%) > Pb (42.0%) > Cu (32.9%) > As (23.6%) > Ni (20.1%) > V (16.8%) > Cr (13.3%). According to the combined source analysis, traffic was the primary risk factor in the WA (54.5 and 58.3% of NCR and CR, respectively) and CA (61.8 and 51.2%), with solid waste being the main risk factor in the EA (41.9 and 51.3%). In oral bioaccessibility testing, lower non-carcinogenic (<1.0) and carcinogenic risks (<1 × 10−6) of heavy metals were observed than those based on the total metal content. More importantly, As (43.4%) was replaced by V (29.7%) as the main contributor to NCR. Source-specific and bioaccessibility-based health risk assessments can accurately identify priority pollutants and heavy metals in urban road dust that need to be controlled. This provides more effective and accurate urban environmental risk management recommendations for sustainable urban development and population health.

Multiple approaches for heavy metal contamination characterization and source identification of farmland soils in a metal mine impacted area

Heavy metal and metalloid contamination of farmland soils are closely related to human health. Soil contamination caused by small-scale mining activities has been largely neglected, especially in developing countries. This research studies the characteristics and the source of heavy metals and metalloids in farmland soils in the Bailing Cu–Zn deposit area in Northeastern China through multiple approaches. Geochemical mapping conducted by portable X-ray fluorescence (pXRF) spectrometry and elemental fractionation analysis (sequential extraction) revealed the spatial variations in elemental concentration and fractionation of the farmland soils. The elemental variations in the sediment and water samples in a stream passing by the farmland were determined by inductively coupled plasma mass spectroscopy (ICP-MS) and inductively coupled plasma atomic emission spectroscopy (ICP-AES) analysis. Results indicate elevated As, Zn, Fe, and Mn concentrations in the west bank of the farmland and the associated environmental risks caused by extremely high As concentrations (>500 mg kg−1). The upstream mining activities are identified as a dominated source of contamination in the studied farmland based on the variations of elemental concentrations and fractionations, as well as multivariate analysis results. This study revealed potential ecological risks caused by heavy metal and metalloid contamination in farmland soils in the metal mine impacted area and the stream as a primary pathway for the migration of pollutants associated with mining activities.

Unveiling Heavy Metal Pollution in Soils and Rice Crops (Oryza sativa L.) Cultivation

The landscape changes through the increasing built-up areas (settlements and industrial) have a potential impact on reducing the quality of agricultural land. Waste from anthropogenic activities (industrial and domestic) is the main source of heavy metals that can affect rice production in the fields. This study examines the quality changes of paddy fields (Oryza sativa L.) polluted by wastewater in Muara Bakti Village, Bekasi Regency. Wastewater's impact on paddy fields is known through heavy metal contamination analysis in soil and rice plants. Chemical analysis of soil, water and plants was completed by the Balai Penelitian Tanaman Sayuran (Balitsa) Laboratory, West Bandung. The results showed that heavy metal levels such as lead (Pb) and cadmium (Cd) in the paddy soil samples were above the threshold in soil, respectively more than 25 mg/l and 0.01 mg/l. In contrast, the rice plant samples, it was identified as containing heavy metals such as Cd and chromium (Cr). Pb content was not detected in the rice plants. Soil in Muara Bakti Village contained optimal nutrients that are still suitable for agriculture. However, heavy metal content detected in soil samples and rice plants requires special handling to prevent endangering the agroecosystem and human health. Keywords: Agroecosystem, Heavy metals, Paddy fields, Soil pollution, Waste

Harmful Health Impacts of Heavy Metals and Behavioral Changes in Humans

Heavy metal pollution not only affects the environment but also the behavior of people who are greatly dependent on their surrounding environment for their survival. There are both natural and anthropogenic sources of heavy metals but their pollution by manmade activities are quite faster than natural sources. A person gets exposed to heavy metals by four major exposure pathways i.e. inhalation, ingestion, dermal exposure and injection. After exposure to heavy metals, internal normal body functions of an individual gets disturbed. This in turn alters the human behavior from normal to an abnormal state. Various behavioral changes are associated with heavy metals exposure such as depression, anxiety, irregular heartbeats, stress, decrease in strength and power, lack of confidence, restlessness, lack of tolerance and aggressions among the individuals and the society as a whole. This review entails the information regarding sources of heavy metals, exposure pathways and health effects of heavy metals resulting in behavioral changes in humans.

Engineering Synergetic Fe‐Co Atomic Pairs Anchored on Porous Carbon for Enhanced Oxygen Reduction Reaction

AbstractThe rational design of heteronuclear dual‐atom catalyst (DAC) is intricate due to the random dispersion of metal atoms under thermal treatment. Herein, a novel precursor pre‐orientation strategy is reported to construct Fe‐Co diatomic sites atomically dispersed on nitrogen doped carbon (Fe‐Co‐NC) via cubic Prussian blue analogue as metal source. Due to the specific synergy between Fe and Co centers, the obtained Fe‐Co‐NC catalyst renders outstanding oxygen reduction reaction (ORR) performance with positive half‐wave potential and good durability in wide pH range. Density functional theory further clarifies the active centers and reveals that the Fe‐Co‐NC dual atomic catalyst follows the modulation mechanism, where the intermediates tended to adsorb on Fe site, while the neighboring Co atom can assist by lowering the d‐band center of Fe site. Experimentally and theoretically emphasizes the priority of heteronuclear diatomic Fe‐Co catalysts over homonuclear Fe‐Fe‐NC and Co‐Co‐NC DAC. Moreover, the Zn‐Air battery (ZAB) and microbial fuel cell (MFC) assembled with Fe‐Co‐NC cathodes both exhibit splendid power density (382 mW cm−2 for ZAB, 2034 ± 103 mW m−2 for MFC) as well as excellent stability. This work provides a new perspective for rational construction and precise regulation for heteronuclear dual‐atom catalysts.

Geochemistry of Middle Jurassic Coals from the Dananhu Mine, Xinjiang: Emphasis on Sediment Source and Control Factors of Critical Metals

In recent years, coal-type critical metal deposits have become a research hotspot in coal geology. As a major coal-accumulating basin in the Xinjiang area, the Turpan-Hami Basin contains abundant coal resources and has the potential to become a large coal-type critical metal deposit. However, previous studies on the enrichment characteristics of critical metal elements in coal are few and need further research. Based on SEM-EDS, XRF, and ICP-MS experiments, this study investigates the coal petrology, mineralogy, and geochemistry of the No. 22 coal of the Xishanyao Formation from the Dananhu Coal Mine, Xinjiang, to identify the sediment source, depositional environment, and controlling factors of the critical metal elements of the No. 22 coal. The results showed that the Dananhu coals are characterized by a low ash yield, low total sulfur content, high volatile yield, and high inertinite proportions. Quartz, kaolinite, and illite are the main minerals in the coal. Compared with the world’s low-rank coals, Ni, Co, Mo, and Ta are slightly enriched, Li, Rb, Cs, Ba, Tl, Bi, and Ge are depleted, and the concentrations of other trace elements are comparable to the average values of the world’s low-rank coals. The REY of the Dannanhu coals exhibited high fractionation, with its enrichment patterns characterized by the H-type and M-H-type. Although most of the critical metals are not enriched in the Dannanhu coals, the Ga, Zr (Hf), and Nb (Ta) concentrations in the coal ash of the Dannanhu coals have reached the economic cut-off grade and have the potential to be a substitute for rare metal resources. The terrigenous detrital sources of the Dannanhu coals mainly come from the Paleozoic dacite, andesite, and a small amount of granite from the Harik Mountain and Eastern Bogda Mountain in the Turpan-Hami Basin. The Dannanhu coals are generally in a dry and hot depositional environment, with high salinity and weak reduction-oxidation. The low source input and weak reduction-oxidation environment have resulted in low concentrations of critical metal of the No. 22 coal from the Dananhu Coal Mine.

Transport characteristics of heavy metals in the soil-atmosphere-wheat system in farming areas and development of multiple linear regression predictive model

Heavy metal accumulation in agricultural products has become a major concern. Previous studies have focused on the transport of heavy metals from the soil and their accumulation in crops. However, recent studies revealed that wheat leaves, ears, and awns can also transport and accumulate heavy metals. Wheat grains can be influenced by two sources of heavy metals: soil contamination and atmospheric deposition. To comprehend the transport characteristics of heavy metals in soil, atmospheric deposition, and wheat, 37 samples each for wheat rhizosphere soil, wheat roots, stems, leaves, and grains were collected. Fifteen samples of atmospheric dry deposition and atmospheric wet deposition were collected from Linshu County (northern area), China. Based on the test data, the characteristics of heavy metals and their distribution in the study area were analyzed. Migration patterns of heavy metals in crops from different sources were investigated using Pearson correlation and redundancy analysis. Finally, a predictive model for heavy metals in wheat grains was developed using multiple linear regression analysis. Significant disparities in the distribution of heavy metals existed among wheat roots, stems, leaves, and grains. The coefficient of variation of heavy metals in atmospheric deposition was relatively high, indicating discernible spatial patterns influenced by human activities. Notably, a positive correlation was observed between the concentration of heavy metals in wheat grains and atmospheric deposition of Hg, Cd, and Pb. Conversely, Zn and Ni levels in wheat grains were significantly negatively associated with soil Zn, Ni, pH, and OM content. The contribution of heavy metal elements from different sources varied in their impact on the grain's heavy metal content. Specifically, atmospheric deposition was the primary source of Hg and Pb in wheat grains, while Cd, Ni, Cu, and Zn were predominantly derived from soil. Using a multiple linear regression model, we could accurately predict Hg, Pb, Cd, Ni, Zn, and As concentrations in crop grains. This model can facilitate quantitative evaluation of ecological risk of heavy metals accumulation in crops in the study area.

Resource partitioning influences levels of toxic trace elements in sympatric tropical seabirds

Morphologically similar species that occupy resource-limited environments tend to differ in their ecological traits in order to coexist, which may result in differential exposure to environmental threats. For instance, partitioning of feeding resources may influence contaminant exposure and bioaccumulation in marine predators through different diets or foraging habitats. Here, we sampled three tropical seabird species breeding in sympatry in the southwestern Atlantic Ocean for blood and feather trace element concentrations (As, Hg, Cd, Pb), and assessed their foraging ecology with bio-logging (GPS tracks and time-depth recorders), analysis of regurgitated prey, and carbon and nitrogen stable isotope mixing models. Red-billed tropicbirds (Phaethon aethereus), brown (Sula leucogaster) and masked (S. dactylatra) boobies differed in their preferred foraging locations, the range of foraging trips, diving parameters and diets. In addition, interspecific differences were detected in blood or feathers for all trace elements analyzed, suggesting influence of the differences observed in diet and space use. Red-billed tropicbirds had the largest foraging range over the continental shelf and over the slope, suggesting lower exposure to continental sources of metals. Brown and masked boobies had higher Hg concentrations than tropicbirds, higher δ15N values (a proxy for trophic level), and δ15N correlated with Hg levels, suggesting biomagnification of Hg along the food chain. Nonetheless, red-billed tropicbirds showed comparable levels of As and Cd in blood or feathers, and higher levels of Pb in both tissues in comparison to boobies, which may suggest overall exposure of seabirds in the region, through their diets and foraging areas. Resource partitioning is critical for allowing coexistence of different seabird species in shared breeding sites where they act as central-place foragers. Nonetheless, in scenarios of environmental pollution, these species-specific strategies lead to differential bioaccumulation, and thus distinct effects of pollution on populations are expected.

Characterization and Source Analysis of Heavy Metal(loid)s Pollution in Soil of an Industrial Park in Kunming, China

This study investigated the characteristics and sources of heavy metal(loid) pollution in the soil of a key industrial park in Kunming, China. In total, 60 soil samples (40 from agricultural land and 20 from construction land) were collected from and around the park. The soil pH and contents of Arsenic (As), lead (Pb), copper (Cu), zinc (Zn), cadmium (Cd), mercury (Hg), nickel (Ni), and chromium (Cr) were measured. The contents of the eight heavy metal(loid)s were analyzed using the background values of heavy metal(loid)s in the Kunming soil. The pollution load, geoaccumulation, and Nemero Comprehensive Pollution Indices were used for environmental risk evaluation. Cluster and principal component analyses were used to resolve heavy metal(loid) sources. Cd was enriched in construction and agricultural soils. As, Hg, Cd, Pb, Cu, and Zn exhibited large spatial differentiation and were significantly affected by the external environment. A regional pollution load index of 3.02 indicated overall heavy pollution. The pollution load index for each heavy metal(loid) indicated light pollution. The geoaccumulation index indicated relatively severe As, Cd, Cu, Pb, and Zn pollution. The Nemero Composite Pollution Index value showed that the study area was heavily polluted, with construction land being mildly polluted by Cd, and agricultural land being moderately polluted. The results of the spatial distribution show that there were high levels of contamination in the center. Correlation and principal component analyses showed that the pollution sources of the eight heavy metal(loid)s varied. Hg, Cd, and Pb originate primarily from industrial and agricultural pollution. Traffic sources significantly impacted Cu, Pb, Cd, and Cr. Natural sources are the main sources of Cr, Ni, and Cd. Ni is also affected by industrial sources, whereas Zn and Cu are affected by agricultural pollution. The influences of As, Cd, and Pb on the surface soil in the study area were more serious. Cd is more widely polluted and should be a priority in controlling soil heavy metal(loid)s.

Analysis of heavy metal and arsenic sources in mangrove surface sediments at Wulishan Port on Leizhou Peninsula, China, using the APCS-MLR model

Mangrove forests are sources and sinks for various pollutants. This study analyzed the current status of heavy metal and arsenic (As) pollution in mangrove surface sediments in rapidly industrializing and urbanizing port cities. Surface sediments of mangroves at Wulishan Port on the Leizhou Peninsula, China, were analyzed using inductively coupled plasma emission spectrometry (ICP-AES) and inductively coupled plasma mass spectrometry (ICP-MS) for the presence of Cr, Pb, Ni, Zn, Cd, Cu, As, and Hg. The Pollution load index, Nemerow pollution index, and Potential ecological risk index were employed to evaluate the pollutant. Multivariate statistical methods were applied for the qualitative analysis of pollutant sources, and the APCS-MLR receptor model was used for quantification. This study indicated the following results: (1) The average content of eight pollutants surpassed the local background level but did not exceed the Marine Sediment Quality standard. The pollution levels across the four sampling areas were ranked as Ⅲ > Ⅳ > Ⅰ > Ⅱ. The area Ⅱ exhibited relatively lower pollution levels with the grain size of the sediments dominated by sand, which was not conducive to pollutant adsorption and enrichment. (2) The factor analysis and cluster analyses identified three primary sources of contamination. As, Cr, Ni, and Pb originated from nearby industrial activities and their associated wastewater, suggesting that the primary source was the industrial source. Cd, Cu, and Zn stem from the cement columns utilized in oyster farming, alongside discharges from mariculture and pig farming, establishing a secondary agricultural source. Hg originated from ship exhaust burning oil and vehicle emissions in the vicinity, representing the third traffic source. (3) The APCS-MLR receptor model results demonstrated industrial, agricultural, and traffic sources contributing 47.19 %, 33.13 %, and 13.03 %, respectively, with 6.65 % attributed to unidentified sources.

Synthesis, characterization and sensing applications of TiO2 doped MOF composites for selective detection of ammonia at room temperature

Herein, we have developed a highly sensitive chemiresistive TiO2 doped metal–organic framework(MOF) composite-based sensor for ammonia detection at room temperature. Two novel Ti-MOFs@TiO2 composites are developed employing terephthalic acid and 2-amino terephthalic acid as organic linkers with Titanium tetra isopropoxide (TTIP) as a metal source by solvothermal technique. The morphology and crystallinity of synthesized compounds were characterized by using Field-emission scanning electron microscopy (FE-SEM) with EDX analysis, X-ray diffraction (PXRD), XPS and Brunauer–Emmett–Teller (BET) analysis techniques. MIL-125@TiO2 sensors exhibited a more specific surface area (374.74 m2 g−1) than the other three compounds. For gas-sensing applications, all composite materials were exposed to different gas vapours like ammonia, formaldehyde, acetic acid, ethyl alcohol, acetone, xylene, toluene and benzene at room temperature. The sensing results indicate that the sensors exhibit excellent response at low concentrations of ammonia, formaldehyde and acetic acid gases (1 ppm level). The enhanced sensor response was attributed to MIL-125@TiO2 (85 response at 50 ppm) and NH2-MIL-125@TiO2 (71 response at 50 ppm) towards ammonia gas and shows a better selectivity, sensitivity and repeatability to ammonia gas. All the materials exhibited less response times (between 8 and 45 sec) and more recovery times (between 13 and 125 sec).

Green Synthesis of Copper Oxide Nanoparticles from Waste Solar Panels Using Piper nigrum Fruit Extract and Their Antibacterial Activity

To promote environmental development and sustain resource circularity, recycling metals from electronic waste is essential. Electronic waste is a significant secondary source of metals, with its production increasing rapidly and most remaining unrecycled. In solar panels, copper is the second-most-valuable metal after silver. We propose an innovative method to recycle copper from waste solar panels and convert it into copper oxide nanoparticles (CuONPs) using a green synthesis method. Synthesizing CuONPs is advantageous due to their large surface area compared to bulk material. Nitric acid, a strong oxidizing agent, was used to leach copper from solid copper wires in waste solar panels. A green synthesis method, following a bottom-up approach, was employed using Piper nigrum fruit extract to synthesize CuONPs. The synthesized nanoparticles were characterized using various qualitative and quantitative techniques. Spectroscopic analysis confirmed the formation of CuONPs, and transmission electron microscopy revealed that the nanoparticles were spherical with sizes up to 60 nm. Biomolecules from the Piper nigrum extract were detected on the surface of the crystalline CuONPs. These nanoparticles exhibited antibacterial activity against Gram-negative Escherichia coli and Gram-positive Staphylococcus aureus using a well-diffusion method, showing a larger zone of inhibition for E. coli compared to S. aureus. This research demonstrates the complete recovery of copper from waste solar panels and its conversion into useful CuONPs, which have potential medicinal applications.