Source Of Indoor Air Pollution Research Articles

An active indoor formaldehyde purification device

Formaldehyde is one of the main sources of indoor air pollution, and the removal effect of formaldehyde of common indoor air purification methods such as placing activated carbon bags or green plants and opening windows for ventilation is not ideal. This paper introduces an active indoor formaldehyde purification device that uses a motor to form the air convection and thus purify the polluted air twice. The multiple activated carbon tubes on the device increase the contact area between the activated carbon and polluted air thereby improve the purification efficiency. The experimental detection has proven that the active indoor formaldehyde purification device has a much better formaldehyde removal effect than ordinary activated carbon products, and has high practical value.

Exposure to mosquito coil and biomass fuel smoke and respiratory health in rural Tamil Nadu, India.

Mosquito coil smoke, along with biomass fuel smoke, are sources of indoor air pollution. Biomass fuel smoke has been studied as a risk factor for poor respiratory outcomes. However, in an Indian context, few studies examine the effect of mosquito coil exposure on poor respiratory outcomes at the community level. To estimate the prevalence of the biomass fuel and mosquito coil use and to determine the association between the use of bio-mass fuel and mosquito coil and poor respiratory health. A cross-sectional survey of 4662 individuals (above the age of 30years) was conducted using a pre-tested questionnaire. Trained interviewers collected data on current and past use of biomass fuels and mosquito coils, usage practices and respiratory health. We computed proportions for exposure variables namely biomass fuel, mosquito coil use and other covariates. We conducted univariate analysis, followed by multivariate logistic regression. The prevalence of ever use of biomass fuels was high (wood: 97.9%; cow dung cake: 76.0% and crop residue: 54.4%). Current use of wood, cow dung cake and crop residue was prevalent among 75.7, 24.3 and 30.9% respondents, respectively. Almost 70% of respondents had ever used mosquito coils, whereas 54% were current users. Overall, 5.5% respondents had poor respiratory health either due to chronic bronchitis or asthma. In multivariate analysis, use of combination of all three biomass fuel types (adjusted odds ratio [AOR] 1.69, 95% confidence interval [CI]: 1.13-2.54) and use of mosquito coil more than or equal to 5days per week (AOR 1.43, 95% CI: 1.04-1.99) were associated with poor respiratory health after adjusting for covariates age, gender, smoking, kitchen type and for each other. Use of biomass fuels and mosquito coils was high in the study population and was associated with poor respiratory health. Therefore, mosquito coil smoke should also be considered an important source of indoor air pollution, similar to biomass fuel exposure. Community education about these sources of indoor air pollution and increased coverage of cleaner fuels and alternative mosquito control methods should be the way forward in the rural areas.

Comparison of VOC Emissions Produced by Different Types of Adhesives Based on Test Chambers.

Volatile organic compounds (VOCs) emitted from building materials into the indoor air may cause discomfort associated with a perceptible chemical odour and may irritate the upper respiratory tract. Hence, it is vital to control indoor air pollution sources, such as interior finishing materials, including adhesives. The study involved carrying out a series of experimental tests of VOC emissions of 25 adhesives based on the ISO 16000 series standards. The research concerns three groups of construction adhesives with indoor applications, i.e., flooring (10), finishing walls and ceilings (6), and for other applications such as edge-gluing or gluing tiles or mirrors (9) differing in chemical composition. A series of temperature tests were carried out for a representative floor adhesive at selected temperatures: 25 °C, 35 °C and 45 °C. The theoretical correlation approach was adopted to characterise the relationship between the emission rate and temperature of selected chemical compounds.

Current State of Indoor Air Phytoremediation Using Potted Plants and Green Walls

Urban civilization has a high impact on the environment and human health. The pollution level of indoor air can be 2–5 times higher than the outdoor air pollution, and sometimes it reaches up to 100 times or more in natural/mechanical ventilated buildings. Even though people spend about 90% of their time indoors, the importance of indoor air quality is less noticed. Indoor air pollution can be treated with techniques such as chemical purification, ventilation, isolation, and removing pollutions by plants (phytoremediation). Among these techniques, phytoremediation is not given proper attention and, therefore, is the focus of our review paper. Phytoremediation is an affordable and more environmentally friendly means to purify polluted indoor air. Furthermore, studies show that indoor plants can be used to regulate building temperature, decrease noise levels, and alleviate social stress. Sources of indoor air pollutants and their impact on human health are briefly discussed in this paper. The available literature on phytoremediation, including experimental works for removing volatile organic compound (VOC) and particulate matter from the indoor air and associated challenges and opportunities, are reviewed. Phytoremediation of indoor air depends on the physical properties of plants such as interfacial areas, the moisture content, and the type (hydrophobicity) as well as pollutant characteristics such as the size of particulate matter (PM). A comprehensive summary of plant species that can remove pollutants such as VOCs and PM is provided. Sources of indoor air pollutants, as well as their impact on human health, are described. Phytoremediation and its mechanism of cleaning indoor air are discussed. The potential role of green walls and potted-plants for improving indoor air quality is examined. A list of plant species suitable for indoor air phytoremediation is proposed. This review will help in making informed decisions about integrating plants into the interior building design.

Housing conditions and respiratory health in children in mining communities: An analysis of data from 27 countries in sub-Saharan Africa

BackgroundPoor housing conditions, such as poor building materials and weak structures as well as high levels of indoor air pollution, are important risk factors for a broad range of diseases, including acute respiratory infections (ARI). In mining areas, research on the determinants of respiratory health predominantly focuses on exposures to outdoor air pollutants deriving from mining operations. However, mining projects also influence the socioeconomic status of households, which, in turn, affect housing quality and individual behaviors and, thus, housing quality and levels of indoor air pollution. In this study, we aimed to determine how proximity to an industrial mining project impacts housing quality, sources of indoor air pollution, and prevalence of ARI. MethodsWe merged data from 131 Demographic and Health Surveys (DHS) with georeferenced data on mining projects in sub-Saharan Africa (SSA) to determine associations between housing quality, indoor air pollution sources, and child respiratory health. Spatial differences in selected indicators were explored using descriptive cross-sectional analyses. Furthermore, we applied a quasi-experimental difference-in-differences (DiD) approach using generalized linear mixed-effects models to compare temporal changes in household and child health indicators at different operational phases of mining projects and as a function of distance to mines. ResultsFor cross-sectional analyses, data of 183,466 households and 141,384 children from 27 countries in SSA were used, while 41,648 households and 34,406 children from 23 SSA countries were included in the DiD analyses. The increase in the share of houses being built from finished building materials after mine opening was more than 4-fold higher (odds ratio (OR): 4.32, 95% confidence interval (CI): 2.98–6.24) in close proximity to mining sites (i.e., ≤ 10 km) compared to areas further away (i.e., 10–50 km). However, these benefits were not equally distributed across socioeconomic strata, with considerably weaker effects observed among poorer households. Increases in indoor tobacco smoking rates in close proximity to operating mines were twice as high as in comparison areas (OR: 2.06, 95% CI: 1.15–3.68). The cross-sectional analyses revealed that traditional cooking fuels (e.g., charcoal, dung, and wood) were less frequently used (OR: 0.27, 95% CI: 0.23–0.31) in areas located in close proximity to mines than in comparison areas. Overall, no statistically significant association between mining operations and the prevalence of symptoms related to ARI in children under the age of 5 years was observed (OR: 0.78, 95% CI: 0.29–2.07). ConclusionsMines impact known risk factors for ARI through diverse pathways. The absence of significant changes in ARI symptoms among children is likely the result of counteracting effects between improvements in housing infrastructure and increased exposures to air pollutants from outdoor sources and tobacco smoking. For mining projects to unfold their full potential for community development, we recommend that impact assessments move beyond the mere appraisal of mining-related pollution emissions and try to include a more comprehensive set of pathways through which mines can affect ARI in exposed communities.

Colorimetric Sensing of Volatile Organic Compounds Produced from Heated Cooking Oils.

Measurement of cooking-associated air pollution indoors is an integral part of exposure monitoring and human health risk assessment. There is a need for easy to use, fast, and economical detection systems to quantify the various emissions from different sources in the home. Addressing this challenge, a colorimetric sensor array (CSA) is reported as a new method to characterize volatile organic compounds produced from cooking, a major contributor to indoor air pollution. The sensor array is composed of pH indicators and aniline dyes from classical spot tests, which enabled molecular recognition of a variety of aldehydes, ketones, and carboxylic acids as demonstrated by hierarchical clustering and principal component analyses. To demonstrate the concept, these CSAs were employed for differentiation of emissions from heated cooking oils (sunflower, rapeseed, olive, and groundnut oils). Sensor results were validated by gas chromatography–mass spectrometry analysis, highlighting the potential of the sensor array for evaluating cooking emissions as a source of indoor air pollution.

Inhaled exposure to air fresheners aggravated liver injury in a murine model of nonalcoholic fatty acid liver disease

At present, the consumption and use of air fresheners (AFs) is rapidly increasing worldwide for the purposes of odor removal and to create a pleasant odor. Many recent studies have strongly suggested that the potentially hazardous chemicals emitted from AFs may be the primary source of indoor air pollutants and may cause adverse health effects. Despite the presence of hazardous chemicals in AFs, potential adverse health effects and risk assessment of AFs have not yet been established. The incidence of nonalcoholic fatty acid liver disease (NAFLD) around the world is rapidly increasing, as with obesity and diabetes, and is one of the most common causes of liver disease worldwide. Based on the demonstrated evidence that NAFLD could eventually develop into further health complications such as liver failure, cardiovascular disease, liver cirrhosis, or liver cancer, the current study was performed to clarify the relationship between inhaled AF exposure and NAFLD using a high-fructose diet (HFr)-induced murine model. The results from current study clearly demonstrated that AF exposure further exacerbated liver injury in NAFLD-induced mice. Interestingly, the increased expression of fibrosis-related factors and collagen accumulation in the liver of AF-exposed NAFLD-induced mice resulted in nonalcoholic steatohepatitis (NASH)-like phenotype and fibrosis. Taken together, these results strongly suggest that AF exposure may not only induce liver injury but may also exacerbate NAFLD to lead to NASH-like symptoms. Further study is needed to shed light on the detailed mechanisms behind AF-induced liver effects and its potential role in exacerbating NAFLD to more detrimental disease in order to better scientific evidence for risk assessments of indoor AF exposure.

Characteristics of indoor air pollutants and estimation of their exposure dose

Rural areas of developing countries have various indoor air pollution sources along with solid fuels used for cooking. This study aims to compare five indoor air pollution sources, viz., incense stick, dhoop, mosquito coil, cigarette, and cooking fuel charcoal, with respect to their pollution potential. The monitoring of PM, CO, CO2, NO2, and particulate bound heavy metals was carried out. Dhoop (DH1) was found to be emitting the highest concentration of metal Sb among all the analyzed metals. Dhoop, incense sticks, mosquito coil, and charcoal were found to be having high pollution potential. The first-order decay rate equation indicated that the highest decay rate constant per hour was observed with dhoop (DH1) for PM10 and PM2.5 and with mosquito coil (M1) for CO. The highest half-life of PM10 and PM2.5 was observed for cigarette (CG1) and charcoal (C1) respectively indicating their slow decay in air. The average daily dose values indicated that the age group 6 to < 11 years, 11 to < 16 years, and 31 to < 51 years will be more vulnerable to PM emissions from dhoop (DH1) and incense stick (IS1). The highest hazard index was estimated for incense stick (IS1) and charcoal. Significant carcinogenic risk was observed from cigarette and charcoal. The multiple-path particle dosimetry (MPPD) model was used to estimate the deposition of PM fractions in various regions of the human body.

A Preliminary Research Study for Distribution Characteristics and Sources of Indoor Air Pollutants in the Valuable Archive of the National Library of Korea.

Important records can be damaged directly and indirectly. Their restoration, if possible, is difficult as it is very time-consuming and costly. Although measures have been taken to permanently preserve records, most studies focus on preventing short-term damage from physical or biological factors and not on preventive measures against chemical damage from long-term polluted air exposure. This study investigated the types, concentrations, and distribution characteristics of hazardous chemicals present in the valuable archive of the National Library of Korea (NLK) and identified the sources of these pollutants. Mean SO2, NOX, CO, CO2, and total volatile organic compound (TVOC) concentrations were 1.49 ± 0.44 ppb, 30.52 ± 19.70 ppb, 0.75 ± 0.21 ppm, 368.91 ± 32.23 ppm, and 320.03 ± 44.20 µg/m3, respectively, meeting the Ministry of the Interior and Safety (MOIS) of Korea standards. Toluene (66.43 ± 10.69 µg/m3) and acetaldehyde (157.23 ± 6.43 µg/m3) were present at the highest concentrations, respectively. Two principal components were extracted via a principal component analysis; the primary component (66%) was closely related to outdoor pollution sources and the secondary component (33%) to indoor sources. Results contribute to establishing air quality standards and management measures for preservation of this archive.

Indoor air pollution in Air-Conditioned bus and non-Air-Conditioned bus

The use of buses as mass transportation mode has become a popular option for the people because of the cheap price and flexibility. The bus comfort is one of the keys to improving the quality of transportation service. However, the bus capability to carry many people with various conditions has a potential risk of creating indoor pollution inside the bus. This study aims to examine the level of air pollution inside an air-conditioned bus and a non-air-conditioned bus with a biological agent’s approach as the source of pollutants. The analysis conducted in this study is limited to microorganisms as one of the sources of indoor air pollution. Several media are placed in some part of the air-conditioned bus and non-air-conditioned bus. The study shows that there are fungi inside the buses that serve as contaminants and pathogen microbes that can cause air pollution.

The oxidative capacity of indoor source combustion derived particulate matter and resulting respiratory toxicity

Indoor air pollution sources with emissions of fine particles (PM2.5), including environmental tobacco smoke (ETS) and incense smoke (IS) deteriorate indoor air quality and may cause respiratory diseases in humans. This study characterized the emission factors (EFs) of five types of tobacco and incense in Hong Kong using an environmental chamber. Human alveolar epithelial cells (A549) were exposed to PM2.5 collected from different indoor sources to determine their cytotoxicity. The PM2.5 EF of ETS (109.7±36.5 mg/g) was higher than IS (97.1±87.3 mg/g). The EFs of total polycyclic aromatic hydrocarbons (PAHs) and carbonyls for IS were higher than ETS, and these two combustion sources showed similar distributions of individual PAHs and carbonyls. Oxidative damage and inflammatory responses (i.e. DNA damage, 8-hydroxy-desoxyguanosine (8-OHdG), tumor necrosis factor-α (TNF-α) and interlukin-6 (IL-6)) of A549 cells was triggered by exposure to PM2.5 generated from ETS and IS. Different indoor sources showed different responses to oxidative stress and inflammations due to the accumulation effects of mixed organic compounds. High molecular weight PAHs from incense combustion showed higher correlations with DNA damage markers, and most of the PAHs from indoor sources demonstrated significant correlations with inflammation. Exposure to anthropogenic produced combustion emissions such as ETS and IS results in significant risks (e.g. lung cancer) to the alveolar epithelium within the distal human respiratory tract, of which incense emissions posed a higher cytotoxicity.

Overview on the indoor air pollution sources of the ship cabins and the hyperbaric chambers

The present paper will be focused on analyzing the factors that influence indoor air qualityof the ship cabins and the hyperbaric chambers taking into account the specific degree of pollution, as oxidation of metal surfaces, vaporization, nature of the paints used, respiration, gases or particles coming from the combustion of fuels, chemicals, and allergens. The article will present a synthesis of the influence of characteristic parameters, such as ventilation rate and exposure to mold or chemicals on indoor air quality, as this is strictly and directly related to health, comfort, and ability to work.

Detection of Smoking in Indoor Environment Using Machine Learning

Revealed by the effect of indoor pollutants on the human body, indoor air quality management is increasing. In particular, indoor smoking is one of the common sources of indoor air pollution, and its harmfulness has been well studied. Accordingly, the regulation of indoor smoking is emerging all over the world. Technical approaches are also being carried out to regulate indoor smoking, but research is focused on detection hardware. This study includes analytical and machine learning approach of cigarette detection by detecting typical gases (total volatile organic compounds, CO2 etc.) being collected from IoT sensors. In detail, data set for machine learning was built using IoT sensors, including training data set securely collected from the rotary smoking machine and test data set gained from actual indoor environment with spontaneous smokers. The prediction accuracy was evaluated with accuracy, precision, and recall. As a result, the non-linear support vector machine (SVM) model showed the best performance with 93% in accuracy and 88% in the F1 score. The supervised learning k-nearest neighbors (KNN) and multilayer perceptron (MLP) models also showed relatively fine results, but shows effectivity simplifying prediction with binary classification to improve accuracy and speed.

Outdoor and indoor factors influencing particulate matter and carbon dioxide levels in naturally ventilated urban homes

ABSTRACT The present study investigated indoor and outdoor concentrations of two particulate matter size fractions (PM10 and PM2.5) and CO2 in 20 urban homes ventilated naturally and located in one congested residential and commercial area in the city of Alexandria, Egypt. The results indicate that the daily mean PM2.5 concentrations measured in the ambient air, living rooms, and kitchens of all sampling sites exceeded the WHO guideline by 100%, 65%, and 95%, respectively. The daily mean outdoor and indoor PM10 levels in all sampling sites were found to exceed the WHO guideline by 100% and 80%, respectively. The indoor PM10 and PM2.5 concentrations were significantly correlated with their corresponding outdoor levels, as natural ventilation through opening doors and windows allowed direct transfer of outdoor airborne particles into the indoor air. Most of the kitchens investigated had higher indoor concentrations of PM2.5 and CO2 than in living rooms. The elevated levels of PM2.5 and CO2 in domestic kitchens were probably related to inadequate ventilation. The current study attempted to understand the sources and the various indoor and outdoor factors that affect indoor PM10, PM2.5 and CO2 concentrations. Several domestic activities, such as smoking, cooking, and cleaning, were found to constitute important sources of indoor air pollution. The indoor pollution caused by PM2.5 was also found to be more serious in the domestic kitchens than in the living rooms and the results suggest that exposure to PM2.5 is high and highlights the need for more effective control measures. Implications: Indoor air pollution is a complex problem that involves many determinant factors. Understanding the relationships and the influence of various indoor and outdoor factors on indoor air quality is very important to prioritize control measures and mitigation action plans. There is currently a lack of research studies in Egypt to investigate determinant factors controlling indoor air quality for urban homes. The present study characterizes the indoor and outdoor concentrations of PM10, PM2.5, and CO2 in residential buildings in Alexandria city. The study also determines the indoor and outdoor factors which influence the indoor PM and CO2 concentrations as well as it evaluates the potential indoor sources in the selected homes. This research will help in the development of future indoor air quality standards for Egypt.

Long-term exposure to indoor air pollution and risk of tuberculosis.

Indoor air pollution (IAP) is a recognized risk factor for various diseases. This paper examines the role of indoor solid fuel exposure in the risk of mycobacterium tuberculosis (TB) in Delhi Metropolitan, India. Using a cross-sectional design, subjects were screened for a history of active TB and lifelong exposure to IAP sources, such as solid fuel burning and kerosene. The TB prevalence rate in the study area was 1117 per 100 000 population. Every year, increase in solid fuel exposure was associated with a three percent higher likelihood of a history of active TB. Subjects exposed to solid fuel and kerosene use for both heating home and cooking showed significant associations with TB. Age, household expenditure (a proxy of income), lung function, and smoking also showed significant associations with TB. Smokers and solid fuel-exposed subjects were four times more likely to have a history of active TB than non-smoker and unexposed subjects. These finding calls strategies to mitigate solid fuel exposure, such as use of clean cookstove and ventilation, to mitigate the risk of TB which aligns with the United Nations' goal of "End TB by 2030."

VOC emission inventory of architectural coatings and adhesives for new buildings in China based on investigated and measured data

Architectural decoration is one of the most important sources of anthropogenic volatile organic compound (VOC) emissions in China, as well as one of the major sources of indoor air pollution, which negatively affects the comfort, health, and productivity of residents. In this study, a VOC emission inventory of architectural coatings and adhesives for new buildings in China in 2017 was developed based on building area, using a new database established through a bottom-up activity level investigation and analysis of large number of samples. Our results show that the investigated coating ratio of exterior walls distinctly differed from the empirical value. The comprehensive VOC emission factors and total emissions for architectural coatings and adhesives in China in 2017 were 214.5 kg km−2 and 614 kt, respectively, with floor coatings (41.1%) and solvent-based adhesives (18.2%) being the highest contributors to emissions. Shandong, Jiangsu, Zhejiang, Sichuan, and Guangdong were the five largest emission contributors, accounting for 39.1% of VOC emissions from architectural coatings and adhesives for new buildings. Market access and supervision of architectural materials should be strengthened maximally, and gradual phasing out of solvent-based coatings and adhesives is advised in the future in China.

Cooking with biomass fuel and cardiovascular disease: a cross-sectional study among rural villagers in Phitsanulok, Thailand

Background: Burning biomass fuel is a major source of indoor air pollution; about 40% of Thai people still use biomass for cooking. There is increasing evidence of the association between biomass smoke exposure and serious health effects including cardiovascular disease. The object of this cross-sectional study was to investigate the association between biomass use for household cooking and cardiovascular outcome, including coronary heart disease, hypertension, high cholesterol, diabetes mellitus, and stroke among rural villagers in Phitsanulok, Thailand. Methods: Data from 1078 households were collected using a face-to-face interview questionnaire. In each household, data on cardiovascular disease, cooking practices, and cooking fuel, types of fuel they normally used for cooking, were collected. Results: After being adjusted for gender, age, cigarette smoke, secondhand smoke, and exposure to other sources of air pollution, it was found that the family members of cooks using biomass fuel were at risk of coronary heart disease (CHD; OR=4.35; 95%CI 0.10–18.97), hypertension (OR=1.61; 95%CI 1.10–2.35), high cholesterol (HC; OR=2.74; 95%CI 1.66–4.53), and diabetes (OR=1.88; 95%CI 1.03–3.46). Compared to LPG use, using wood was associated with stroke (OR=7.64; 95%CI 1.18–49.61), and using charcoal was associated with HC (OR=1.52; 95%CI 1.04–2.24). Compared to never user, household cooks who sometimes use charcoal had an increased risk of hypertension (OR=2.04; 95%CI 1.32–3.15), HC (OR=2.61; 95%CI 1.63–4.18), and diabetes (OR=2.09; 95%CI 1.17–3.73); and cooks who often use charcoal had an elevated risk of stroke (OR=3.17; 95%CI 1.04–9.71), and HC (OR=1.52; 95%CI 1.02–2.27) to their family members. Conclusions: The study results were consistent with those found in studies from other parts of the world, and supports that exposure to biomass smoke increase cardiovascular diseases. The issue should receive more attention, and promotion of clean fuel use is a prominent action.

Cooking that kills: Cleaner energy access, indoor air pollution, and health

Dirty cooking fuels are a significant source of indoor air pollution in developing countries, resulting in millions of premature deaths. This paper investigates the health impacts of household access to cleaner fuel using a nationwide fuel-switching program, the largest household energy transition project ever attempted in the developing world, affecting more than 50 million homes in Indonesia. This program focused on replacing a dirty cooking fuel (kerosene) with a cleaner one (liquid petroleum gas). The difference-in-differences estimates and within-mother estimates suggest that the program led to a significant decline in infant mortality with the effects concentrated on the perinatal period. The program also reduced the prevalence of low birth weight, suggesting that fetal exposure to indoor air pollutants is an important channel. These findings elucidate how a policy that combines a subsidy on the use of cleaner-burning fuel with a restriction on the dirty fuel can pay public health dividends.

Exposure assessment of emissions from mobile food carts on New York City streets

Food carts are common along streets in cities throughout the world. In North America, food cart vendors generally use propane, charcoal, or both propane and charcoal (P and C) for food preparation. Although cooking emissions are known to be a major source of indoor air pollution, there is limited knowledge on outdoor cooking’s impact on the ambient environment and, in particular, the relative contribution of the different cooking fuels. This field study investigated the air pollution the public is exposed to in the micro-environment around 19 food carts classified into 3 groups: propane, charcoal, and P and C carts. Concentrations near the food carts were measured using both real-time and filter-based methods. Mean real-time concentrations of PM2.5, BC2.5, and particle counts were highest near the charcoal food carts: 196 μg/m3, 5.49 μg/m3, and 69,000 particles/cm3, respectively, with peak exposures of 1520 μg/m3, 67.9 μg/m3, and 235,000 particles/cm3, respectively. In order of pollution emission impacts: charcoal > P and C > propane carts. Thus, significant differences in air pollution emissions occurred in the vicinity of mobile food carts, depending on the fuel used in food preparation. Local air pollution polices should consider these emission factors in regulating food cart vendor operations.

Materials Contamination and Indoor Air Pollution Caused by Tar Products and Fungicidal Impregnations: Intervention Research in 2014-2019.

Construction materials containing tar products are a source of indoor air pollution in buildings. This particularly concerns old buildings, in which wooden structures were impregnated with tar compositions (creosote oil and Xylamite oil containing tar products) and buildings in which bituminous seal containing hydrocarbon solvents was used. During the 1970s and 1980s, an impregnant known as Xylamite was commonly used in Polish buildings. This material still emits organic vapors into the building’s environment, significantly worsening indoor air quality (IAQ). Xylamites and other impregnating materials are a source of indoor air pollution through toxic organic compounds, such as phenol, cresols, naphthalenes, chlorophenols (CPs), and chloronaphthalenes (CNs), which emit specific odors. TD-GC/MS enables detailed identification of the reasons behind chemical indoor air pollution. The results of laboratory tests on the chemical emissions of bitumen-impregnated materials were presented in 32 case studies. In turn, the results of indoor air pollution by volatile bitumen components were presented on 11 reference rooms and 14 case studies, including residential buildings, office buildings, and others. Laboratory tests of samples of construction products confirmed the main emission sources into indoor air. The research results for the period 2014–2019 are tabulated and described in detail in this manuscript.