Addition Of Solvent Research Articles

Design and evaluation of curcumin-loaded poloxamer hydrogels as injectable depot formulations

Poloxamer hydrogels are of interest as injectable depot delivery systems. However, their use for delivering hydrophobic drugs, such as curcumin, is limited due to poor loading capacity. Here, we evaluated the influence of incorporating hydrophobic medium chain triglycerides (MCT) or amphiphilic polyethylene glycol 400 (PEG400) on the physicochemical properties, drug loading, and in vitro compatibility of a curcumin-loaded poloxamer hydrogel.Poloxamer 407 and 188 hydrogel formulations (16:6 w/w) were prepared and MCT and PEG400 (saturated with curcumin) were added to these systems, either alone or in combination, up to a 10 % w/w additive solvent load. Formulation viscoelasticity, gelation behaviour, injectability, morphology and release profiles were assessed. The cytocompatibility of the formulations was also assessed on dermal fibroblasts (HDFn).Both additives increased curcumin loading into the formulation. Addition of MCT to the hydrogel significantly increased its gelation speed, while PEG400 had a less profound impact. Both additive solvents increased the force required to inject the formulation. PEG400 containing systems were single phase, whereas MCT addition created emulsion systems. All formulations released ∼20–30 % of their loaded curcumin in a sustained fashion over 24 h. The modified hydrogel systems showed good biocompatibility on cells when administering up to ∼100–150 µM curcumin into the culture.This study addresses a key limitation in loading hydrophobic drugs into hydrogels and provides a strategy to enhance drug loading and performance of hydrogels by integrating additives such as MCT and PEG400 into the systems.

Incorporation of canola meal as a sustainable natural filler in PLA foams

The canola oil industry generates significant waste as canola meal (CM) which has limited scope and applications. This study demonstrates the possibility of valorization of CM as a sustainable natural filler in a biodegradable polymer composite of Poly(lactic acid) (PLA). Generally, interfacial bonding between natural fibers and the polymer matrix in the composite is weak and non-uniform. One possible solution is to derivatize natural fibre to introduce interfacial bond strength and compatibility with the PLA polymer matrix. Here, CM was succinylated in a reactive extrusion process using succinic anhydride at 30 wt% to get 14% derivatization with 0.02 g of -COOH density per g of CM. The CM or succinylated CM at 5 and 15 wt% was co-extruded with amorphous PLA to get composite fibers. CM-PLA and succinylated CM-PLA biocomposites were foamed using a mild and green microcellular foaming process, with CO2 as an impregnating agent without any addition of organic solvents. The properties of the foams were analyzed using differential scanning calorimetry (DSC), Dynamic mechanical thermal analysis (DMTA), shrinkage, and imaging. The addition of CM or succinylated CM as a natural filler did not significantly change the glass transition temperature, melting point, percent crystallization, stiffness, and thermal stability of PLA foams. This suggests succinylation (modification) of CM is not a mandatory step for improving interphase compatibility with the amorphous PLA. The new PLA-CM foams can be a good alternative in the packaging industry replacing the existing petroleum-based polymer foams.Graphical

Research Progress on the Application of MOF and MOF‐Based Materials in Nitrogen Reduction

AbstractElectrocatalytic and photocatalytic nitrogen fixation have become new ways to achieve green nitrogen reduction because of their environmentally friendly and cost‐effective characteristics. At present, there has been an increasing curiosity about using metal‐organic frameworks (MOFs) for photocatalysis and electrocatalysis. However, electrocatalytic and photocatalytic ammonia production is still not practical for practical applications. Having a thorough understanding of nitrogen fixation is necessary for the advancement of practical applications and the development of highly efficient catalysts in the future. The catalytic nitrogen fixation activity of MOF itself is limited. By adjusting the exposure of active sites through low‐temperature calcination and solvent addition, the photogenerated carrier recombination is inhibited, and the adsorption and activation of N2 are enhanced, improving its performance in nitrogen fixation applications. This review examines the reported photocatalysts, electrocatalysts, and photoelectrocatalysts based on MOFs and their associated materials. The underlying mechanism for photocatalysis and electrocatalysis is elucidated. Additionally, an inclusive survey of MOFs and related materials as catalysts for nitrogen reduction reaction (NRR) is presented, with representative examples discussed. Finally, the research progress of MOF‐based catalytic nitrogen fixation materials is summarized and prospected.

Photoacoustic processing of decellularized extracellular matrix for biofabricating living constructs

The diverse biomolecular landscape of tissue-specific decellularized extracellular matrix (dECM) biomaterials provides a multiplicity of bioinstructive cues to target cells, rendering them highly valuable for various biomedical applications. However, the isolation of dECM biomaterials entails cumbersome xenogeneic enzymatic digestions and also additional inactivation procedures. Such, increases processing time, increments costs and introduces residues of non-naturally present proteins in dECM formulations that remain present even after inactivation. To overcome these limitations, herein we report an innovative conjugation of light and ultrasound-mediated dECM biomaterial processing for fabricating dECM biomaterials. Such approach gathers on ultrasound waves to facilitate dECM-in-liquid processing and visible light photocrosslinking of tyrosine residues naturally present in dECM biomaterials. This dual step methodology unlocked the in-air production of cell laden dECM hydrogels or programmable dECM hydrogel spherical-like beads by using superhydrophobic surfaces. These in-air produced units do not require any additional solvents and successfully supported both fibroblasts and breast cancer cells viability upon encapsulation or surface seeding. In addition, the optimized photoacoustic methodology also enabled a rapid formulation of dECM biomaterial inks with suitable features for biofabricating volumetrically defined living constructs through embedded 3D bioprinting. The biofabricated dECM hydrogel constructs supported cell adhesion, spreading and viability for 7 days. Overall, the implemented photoacoustic processing methodology of dECM biomaterials offers a rapid and universal strategy for upgrading their processing from virtually any tissue. Statement of significanceLeveraging decellularized extracellular matrix (dECM) as cell instructive biomaterials has potential to open new avenues for tissue engineering and in vitro disease modelling. The processing of dECM remains however, lengthy, costly and introduces non-naturally present proteins in the final biomaterials formulations. In this regard, here we report an innovative light and ultrasound two-step methodology that enables rapid dECM-in-liquid processing and downstream photocrosslinking of dECM hydrogel beads and 3D bioprinted constructs. Such photoacoustic based processing constitutes a universally applicable method for processing any type of tissue-derived dECM biomaterials.

Efficient base- and ligand-free palladium catalysed O-arylation of phenols in choline chloride:triethanolamine as a reusable deep eutectic solvent.

In this paper, we present a novel and sustainable approach using choline chloride:triethanolamine as a green, efficient and reusable deep eutectic solvent (DES) for Pd-catalysed O-arylation reactions with Pd/BaSO4 (10%). By using the unique properties of DESs, we successfully achieved C-O bond formation without the need for additional solvents, bases and ligands. This solvent/catalyst system ([ChCl][TEA]2) functioned as a dual catalyst and solvent system, enabling fast and environmentally friendly C-O bond formation from phenol derivatives and electron-deficient aryl halides, leading to remarkable yields under mild reaction conditions. To identify and characterize this DES, we employed differential scanning calorimetry, thermogravimetric analysis, Fourier-transform infrared spectroscopy, refractive index, viscosity, the potential of hydrogen (pH) and conductivity measurements. One of the remarkable advantages of this DES system is its exceptional stability. This solvent/catalyst system exhibited high stability throughout the reaction cycles, showing no significant loss of activity. As a result, this DES and catalyst (Pd/BaSO4 (10%)) can be easily recycled and re-used for up to three consecutive cycles, making it an economically and environmentally attractive option for organic reactions. Our approach offers several key benefits, including simple catalyst preparation, quick reaction times and excellent production efficiency.

High-Intensity Circular Dichroism of Head-To-Tail Regioregular Poly(1,4-Phenylene)s in the Aggregated State.

Circular dichroism (CD) studies on poly(1,4-phenylene)s bearing a chiral side chain in the aggregated conditions were carried out. Little CD was observed in a solution form, while addition of a poor solvent into the polyphenylene solution induced aggregation and a strong CD was observed, accordingly. Applying the controlled degree of polymerization (DP) of poly(1,4-phenylene) in the use of bidentate diphosphine Chiraphos as a ligand for the nickel catalyst, the relationship of DP with CD strength was studied to reveal to show the highest CD at the DP=84 (gabs=ca. 2×10-2). It was also found that the related aggregation was observed in good solvent 1,2-dichloroethane upon standing the solution at 4 °C for 3-23 days to observe gabs=ca. 10-1. Studies on the substituent effect of poly(1,4-phenylene) suggested that CD behaviors were dependent on the type of non-chiral substituent on the aromatic ring as well as the side-chain chirality.

Highly Efficient and Stable Organic Solar Cells Enabled by a Commercialized Simple Thieno[3,2-b]thiophene Additive.

Delicately manipulating nanomorphology is recognized as a vital and effective approach to enhancing the performance and stability of organic solar cells (OSCs). However, the complete removal of solvent additives with high boiling points is typically necessary to maintain the operational stability of the device. In this study, two commercially available organic intermediates, namely thieno[3,2-b]thiophene (TT) and 3,6-dibromothieno[3,2-b]thiophene (TTB) are introduced, as solid additives in OSCs. The theoretical simulations and experimental results indicate that TT and TTB may exhibit stronger intermolecular interactions with the acceptor Y6 and donor PM6, respectively. This suggests that the solid additives (SAs)can selectively intercalate between Y6 and PM6 molecules, thereby improving the packing order and crystallinity. As a result, the TT-treated PM6:Y6 system exhibits a favorable morphology, improved charge carrier mobility, and minimal charge recombination loss. These characteristics contribute to an impressive efficiency of 17.75%. Furthermore, the system demonstrates exceptional thermal stability (T80>2800h at 65°C) and outstanding photostability. The universal applicability of TT treatment is confirmed in OSCs employing D18:L8-BO, achieving a significantly higher PCE of 18.3%. These findings underscore the importance of using appropriate solid additives to optimize the blend morphology of OSCs, thereby improving photovoltaic performance and thermal stability.

Development of a highly sensitive ultra-small ratiometric fluorescence nanosphere probe for Sunset Yellow detection

A highly sensitive ultra-small ratiometric fluorescence nanosphere probe was successfully manufactured to detect Sunset Yellow (SY). The probe, CMCS@N, S-CDs/Rh6G, was formed through the encapsulation of N, S-CDs and Rh6G within carboxymethyl chitosan (CMCS) through in situ cross-linking. Remarkably, our nanosphere probe had an average grain diameter of 6.80 nm and exhibited excellent dispersibility without the need for additional solvents. The probe exhibited a strong linear relationship with SY concentration in the range of 0.26–100 μM, with a low detection limit of 0.078 μM. Furthermore, SY demonstrated strong fluorescence quenching capability on our nanosphere probe, with the fluorescence quenching mechanism involving a combined effects of inner filter effect (IFE) and static quenching. Notably, our nanosphere probe retained the bacteriostatic properties of CMCS, with a substantial bacteriostasis rate of 77.58 %, introducing novel potential applications.

A Difluoro-Methoxylated Ending-Group Asymmetric Small Molecule Acceptor Lead Efficient Binary Organic Photovoltaic Blend.

Developing a new end group for synthesizing asymmetric small molecule acceptors (SMAs) is crucial for achieving high-performance organic photovoltaics (OPVs). Herein, an asymmetric small molecule acceptor, BTP-BO-4FO, featuring a new difluoro-methoxylated end-group is reported. Compared to its symmetric counterpart L8-BO, BTP-BO-4FO exhibits an upshifted energy level, larger dipole moment, and more sequential crystallinity. By adopting two representative and widely available solvent additives (1-chloronaphthalene (CN) and 1,8-diiodooctane (DIO)), the device based on PM6:BTP-BO-4FO (CN) photovoltaic blend demonstrates a power conversion efficiency (PCE) of 18.62% with an excellent open-circuit voltage (VOC) of 0.933V, which surpasses the optimal result of L8-BO. The PCE of 18.62% realizes the best efficiencies for binary OPVs based on SMAs with asymmetric end groups. A series of investigations reveal that optimized PM6:BTP-BO-4FO film demonstrates similar molecular packing motif and fibrillar phase distribution as PM6:L8-BO (DIO) does, resulting in comparable recombination dynamics, thus, similar fill factor. Besides, it is found PM6:BTP-BO-4FO possesses more efficient charge generation, which yields better VOC-JSC balance. This study provides a new ending group that enables a cutting-edge efficiency in asymmetric SMA-based OPVs, enriching the material library and shed light on further design ideas.

Zwitterionic cellulose nanofibers-based hydrogels with high toughness, ionic conductivity, and healable capability in cryogenic environments

Extreme environmental conditions often lead to irreversible structural failure and functional degradation in hydrogels, limiting their service life and applicability. Achieving high toughness, self-healing, and ionic conductivity in cryogenic environments is vital to broaden their applications. Herein, we present a novel approach to simultaneously enhance the toughness, self-healing, and ionic conductivity of hydrogels, via inducing non-freezable water within the zwitterionic cellulose-based hydrogel skeleton. This approach enables resulting hydrogel to achieve an exceptional toughness of 10.8 MJ m−3, rapid self-healing capability (98.9 % in 30 min), and high ionic conductivity (2.9 S m−1), even when subjected to −40 °C, superior to the state-of-the-art hydrogels. Mechanism analyses reveal that a significant amount of non-freezable water with robust electrostatic interactions is formed within zwitterionic cellulose nanofibers-modified polyurethane molecular networks, imparting superior freezing tolerance and versatility to the hydrogel. Importantly, this strategy harnesses the non-freezable water molecular state of the zwitterionic cellulose nanofibers network, eliminating the need for additional antifreeze and organic solvents. Furthermore, the dynamic Zn coordination within these supramolecular molecule chains enhances interfacial interactions, thereby promoting rapid subzero self-healing and exceptional mechanical strength. Demonstrating its potential, this hydrogel can be used in smart laminated materials, such as aircraft windshields.

Miniaturized matrix solid-phase dispersion assisted by deep eutectic solvent for acrylamide determination in bread samples.

Acrylamide determination is important to state its quantity in baked food preventing any potential carcinogenic effects. Matrix solid-phase dispersion (MSPD) extraction is an extraction procedure based on a homogenization phase between a solid sample and a solid dispersing material to break sample increasing analyte extraction yield, often used for acrylamide determination. The addition of a green deep eutectic solvent (DES) during the MSPD homogenization phase improves the analyte extraction, giving the possibility to reduce the amount of organic solvent used. In this work, a miniaturized MSPD extraction assisted by a DES was developed to determine acrylamide in bread, using high-performance liquid chromatography coupled with mass spectrometry detection. The optimized procedure provides 1:1 (w/w) matrix-to-dispersing material ratio, 2mL of methanol as extraction solvent, and 50 μL of choline chloride-glycerol DES added during the homogenization phase. Method validation ensured good results with minimum recoveries of 90%, high precision with a maximum intra-day error of 4%, and inter-day error of 6%. Limit of detection and limit of quantification resulted to be 16μg/kg and 35μg/kg, respectively. This miniaturized extraction procedure represents a good alternative to those reported in the literature, guaranteeing great performance and respecting green chemistry principles.

Exploring the impact of solvent additives on dielectric properties in polymer photovoltaics: A deconvolution and in-depth study of electrical modulus, complex conductivity, and impedance responses

Impedance and dielectric spectroscopy is a well-known technique for characterizing interfaces, especially donor/receiver interfaces in bulk heterojunction (BHJ) solar cells. This technique was employed to investigate the interface of poly (4,8-bis-alkyloxybenzo(1,2-b:4,5-b0) dithio-phene-2,6-diyl-alt- (alkyl thieno (3,4-b) thiophene-2-carboxylate)-2,6-diyl) (PBDTTT-C): PC70BM in bulk heterojunction with DIO as additive. For this reason, a simulation was carried out to generate the complex impedance, modulus, and complex conductivity data based on the electrical parameters extracted from the equivalent circuit. Therefore, a new approach based on the coupling of complex functions such as impedance, modulus, and conductivity has been proposed. In addition, an extrapolation and deconvolution approaches are used to highlight the relaxation processes, the BHJ layer process, the two electrical contacts of the interfaces between PEDOT: PSS/PBDTTT-C: PC70BM and PBDTTT-C: PC70BM/Ca process, and the electrode polarization process. In the next step, the remove the low-frequency process enhances the visibility of other processes, particularly observable in the evolution of the electrical modulus and the conduction parameters associated with each process. In the complex functions, there was a good correlation between all parameters derived from both processes. The characteristics of the conduction processes, such as conductivity values at low and high frequencies and ionic strength were then extracted. All these parameters were evaluated and discussed as a function of the thickness of the active layer. Finally, we demonstrate that the electrical modulus and complex conductivity can be perfect tools to characterize the donor/acceptor interfaces.

A low dose of curcumin-PDA nanoparticles improves viability and proliferation in endoneurial fibroblasts and Schwann cell cultures

Curcumin is a polyphenol extracted from Curcuma longa’s roots. Low doses of curcumin are related to anti-inflammatory, antioxidant, and neuroprotective effects, while high doses are used for their lethality. This diversity of behaviors allows us to understand curcumin as a compound with hormetic action. Due to its strongly hydrophobic character, curcumin is often solubilized in organic compounds. In this way, we have recently reported the undesirable and occasionally irreversible effects of alcohol and DMSO on the viability of primary Schwann cell cultures. In this scenario, the use of nanoparticles as delivery systems has become a successful alternative strategy for these compounds. In the present work, we describe the structure of Polydopamine (PDA) nanoparticles, loaded with a low dose of curcumin (Curc-PDA) without the use of additional organic solvents. We analyzed the curcumin released, and we found two different forms of curcumin. Small increased cell viability and proliferation were observed in endoneurial fibroblast and Schwann cell primary cultures when Curc-PDA was steadily supplied for 5 days. The increased bioavailability of this natural compound and the impact on cells in culture not only confirm the properties of curcumin at very low doses but also provide a glimpse of a possible therapeutic alternative for PNS conditions in which SCs are involved.

Three-dimensional cross-linked network deep eutectic gel polymer electrolyte with the self-healing ability enable by hydrogen bonds and dynamic disulfide bonds

Solid polymer electrolytes (SPEs) are effective solutions for the development of high-performance and flexible lithium metal batteries (LMBs). However, the key problems of SPEs including low ionic conductivity and inability to repair damage have hindered their industrialization process. In this work, a three-dimensional (3D) cross-linked network gel polymer electrolyte (CNGPE) is designed. The addition of deep eutectic solvent (DES) improves the ionic conductivity of CNGPE. The hydrogen bonds and dynamic disulfide bonds in the 3D cross-linked network endow CNGPE rapid self-healing ability at ambient temperature. In addition, the addition of lithium difluoro(oxalato)borate (LiDFOB) and lithium nitrate (LiNO3) helps to form a stable solid electrolyte interface (SEI). Due to the ingenious design, the Li/CNGPE/Li symmetrical cell exhibits excellent interface stability and no short circuit occurs for more than 800 h. The assembled LiFePO4/CNGPE/Li cell exhibits a discharge specific capacity of 126 mAh g−1 after 960 cycles at 0.5C. This work has shown that the self-healing gel polymer electrolyte containing DES provides an effective and feasible method for the development of high-performance LMBs.

Imidazole-based organic polymer frameworks as metal- and halogen-free heterogeneous platforms for efficient CO2 cycloaddition

Developing effective metal- and halogen-free heterogeneous catalysts for the CO2 cycloaddition remains a challenge. In this study, novel imidazole-based hyper-crosslinked polymers (HCP-BZ, HCP-BP and HCP-TBZ) with abundant N sites were constructed via a one-pot polymerization, and employed as heterogeneous catalysts for the CO2 cycloaddition reaction. The special skeletal pore structure with abundant hierarchical pore structures and uniformly distributed active sites were demonstrated by various characterization technologies. The optimal HCP-TBZ(16:1) exhibits a good CO2 selective adsorption performance with a CO2 adsorption capacity of 2.23 mmol/g and CO2/N2 adsorption selectivity of 41 at 273 K and 0.1 MPa. Additionally, the resulting catalyst HCP-TBZ(16:1) achieves an excellent catalytic performance with 96 % yield and 99 % selectivity without metal, halogen, cocatalyst and solvent additions (120 °C, 1.0 MPa CO2, 5 h). Moreover, the HCP-TBZ(16:1) also exhibits a satisfactory catalytic activity under the mild conditions (70 °C, 1.0 MPa CO2), and can effectively catalyze the cyclic carbonate preparation from the dilute CO2 (15 %CO2/85 %N2). The comparable catalytic activity and the determined structural stability, reusability and universality make the prepared imidazole-based HCPs a potential heterogeneous catalyst candidate for the CO2 cycloaddition. This study will provide some guidance for developing metal-free and halogen-free CO2 adsorption and conversion platforms.

Phosphorus–nitrogen compounds: part 75—design, synthesis, stereogenic and conformational properties of chiral dispiro(N/N)cyclotriphosphazenes: structural analysis and photophysical and bioactivity studies

Multiheterocyclic inorganic–organic hybrid phosphazenes have robust inorganic ring systems with the stabilities of the phosphorus nitrogen skeleton and many different substituents bonded to the P atoms. In present study, unsymmetrical dispirocyclotriphosphazenes were prepared due to their potential to depict steric hindrance and electronic rearrangement in creating permanent chirality for certain conformational and configurational isomers. These isomers may have an effect on DNA bindings and activitiy against selected fungi and bacteria, remarkably. Herein, tetrachlorocyclotriphosphazenes (1 and 2) were reacted with 9-ethyl-N-methyl-3-carbazolyl-1,2-diaminoethane (3), 9-ethyl-N-ethyl-3-carbazolyl-1,2-diaminoethane (4) and 9-ethyl-N-methyl-3-carbazolyl-1,3-diaminopropane (5) to give the new unsymmetrical cis/trans-dispirocyclotriphosphazenes, [(ClBz/BzSpiro-6)R1(N3P3)(CzSpiro-n)R2]Cl2 (Cz: Carbazolyl; R1:Me R2:Me or Et; n = 5 or 6; trans 6a–11a and cis 6b–11b). Characterizations, chiralities, and photophysical and biological properties of the new compounds were examined. The molecular and crystal structures of cis-6b, cis-7b, trans-9a, cis-9b, trans-10a and cis-10b were determined by single crystal X-ray crystallography. The chiralities of these compounds with unsymmetrical spiro-architectures were confirmed by X-ray crystallography. These results were further proven by 31P NMR data recorded with the addition of a chiral solvent (CSA). Additionally, circular dichroism (CD) spectra also supported the results. Photophysical measurements indicate that these compounds show emission with lifetimes of approximately 5.6–5.9 ns. In addition, the bioactivities of some isomers were found to be different and quite high against some bacterial and yeast strains. Trans-8a was very active against B. cereus (MBC = 78.1 µM), while cis-6b, trans-9a and cis-9b were very active against the pathogenic yeast C. albicans (MFC = 156.3 µM).Graphical abstract

Ethanol as Solvent Additives with Competitive Effect for High-Stable Aqueous Zinc Batteries.

Aqueous zinc-ion batteries are emerging as promising sustainable energy-storage devices. However, their cyclic stability is still a great challenge due to the inevitable parasitic reaction and dendrite growth induced by water. Herein, a cosolvent strategy based on competitive effect is proposed to address the aforementioned challenges. Ethanol with a higher Gutmann donor number demonstrates lower polarity and better wettability on the Zn surface compared with water, which endows ethanol with the ability of minimizing water activity by weakening H bonds and preferentially adsorbing on the Zn electrode. The above competitive advantages synergistically contribute to inhibiting the decomposition of free water and dendrite growth. Besides, an organic-inorganic hybrid solid-electrolyte interphase layer is in situ built based on ethanol additives, where organic matrix suppresses water corrosion while inorganic fillers promote fast Zn2+ diffusion. Consequently, the electrolyte with ethanol additives boosts a high reversibility of Zn deposition, long-term durability, as well as superior Zn2+ diffusibility in both Zn half-cells (Zn||Cu and Zn||Zn batteries) and Zn full cells (Zn||PTCDA and Zn||VO2 batteries). This work sheds light on a universal strategy to design a high-reversible and dendrite-free Zn anode for stable aqueous batteries.

Tuning Mechanical Characteristics and Permeability of Alginate Hydrogel by Polyvinyl Alcohol and Deep Eutectic Solvent Addition.

Alginate-based hydrogels are widely utilized for various applications, including enzyme immobilization and the development of drug delivery systems, owing to their advantageous characteristics, such as low toxicity, high availability and cost-effectiveness. However, the broad applicability of alginate hydrogels is hindered by their limited mechanical and chemical stability, as well as their poor permeability to hydrophobic molecules. In this study, we addressed the mechanical properties and chemical resistance of alginate hydrogels in a high-pKa environment by the copolymerization of alginate with polyvinyl alcohol (PVA). The addition of PVA resulted in a threefold improvement in the shear modulus of the copolymeric hydrogel, as well as enhanced chemical resistance to (S)-α-methylbenzylamine, a model molecule with a high pKa value. Furthermore, we addressed the permeability challenge by introducing a betaine-propylene glycol deep eutectic solvent (DES) into the PVA-alginate copolymer. This led to an increased permeability for ethyl 3-oxobutanoate, a model molecule used for bioreduction to chiral alcohols. Moreover, the addition of the DES resulted in a notable improvement of the shear modulus of the resulting hydrogel. This dual effect highlights the role of the DES in achieving the desired improvement of the hydrogel as an immobilization carrier.

The Nanoscale Structure and Stability of Organic Photovoltaic Blends Processed with Solvent Additives.

Controlling the nanomorphology in bulk heterojunction photoactive blends is crucial for optimizing the performance and stability of organic photovoltaic (OPV) technologies. A promising approach is to alter the drying dynamics and consequently, the nanostructure of the blend film using solvent additives such as 1,8-diiodooctane (DIO). Although this approach is demonstrated extensively for OPV systems incorporating fullerene-based acceptors, it is unclear how solvent additive processing influences the morphology and stability of nonfullerene acceptor (NFA) systems. Here, small angle neutron scattering (SANS) is used to probe the nanomorphology of two model OPV systems processed with DIO: a fullerene-based system (PBDB-T:PC71BM) and an NFA-based system (PBDB-T:ITIC). To overcome the low intrinsic neutron scattering length density contrast in polymer:NFA blend films, the synthesis of a deuterated NFA analog (ITIC-d52) is reported. Using SANS, new insights into the nanoscale evolution of fullerene and NFA-based systems are provided by characterizing films immediately after fabrication, after thermal annealing, and after aging for 1year. It is found that DIO processing influences fullerene and NFA-based systems differently with NFA-based systems characterized by more phase-separated domains. After long-term aging, SANS reveals both systems demonstrate some level of thermodynamic induced domain coarsening.

Study of the high-energy alpha particles influence on the styrene accumulation kinetics and functional groups during the synthesis of proton-exchange membranes based on PVDF.

The study investigates the effect of alpha irradiation on the graft copolymerization of styrene with polyvinylidene fluoride (PVDF). Using methods of radiation-chemical modification, a proton exchange membrane (PEM) with a uniform distribution of functional sulfate groups throughout the entire volume was developed. Grafting of styrene was carried out at different temperatures and solution concentrations. Functional sulfo-groups were added to the graft polymer by sulfonation, with the addition of solvents. The degree of grafting (DG), water absorption (W) and exchange capacity (IEC) correlate well with the absorbed dose and alpha particle fluence. Research into this method will allow us to develop an affordable industrial technology for widespread implementation.