Solution Of Problem Research Articles

A Reduced Order Schwarz Method for Nonlinear Multiscale Elliptic Equations Based on Two-Layer Neural Networks

Neural networks are powerful tools for approximating high dimensional data that have been used in many contexts, including solution of partial differential equations (PDEs). We describe a solver for multiscale fully nonlinear elliptic equations that makes use of domain decomposition, an accelerated Schwarz framework, and two-layer neural networks to approximate the boundary-to-boundary map for the subdomains, which is the key step in the Schwarz procedure. Conventionally, the boundary-to-boundary map requires solution of boundary-value elliptic problems on each subdomain. By leveraging the compressibility of multiscale problems, our approach trains the neural network offline to serve as a surrogate for the usual implementation of the boundary-to-boundary map. Our method is applied to a multiscale semilinear elliptic equation and a multiscale $p$-Laplace equation. In both cases we demonstrate significant improvement in efficiency as well as good accuracy and generalization performance.

An improved golden jackal optimization algorithm for combined economic emission dispatch problems

In this research paper, a new improved golden jackal optimization (IGJO) algorithm is applied to address the combined economic emission dispatch (CEED) problem, along with various thermal generator constraints such as valve point loading (VPL) effect, generator limits (GL) in power system. The hunting behavior of the golden jackals is mimicked in the golden jackal optimization (GJO) algorithm. The main aim of the CEED problem is to find the best optimal generation scheduling while minimizing both fuel cost and emission besides meeting the different power system constraints. The original GJO algorithm faces challenges when dealing with high-dimensional optimization problems, as it tends to get trapped in local optima. To address this issue the opposition-based learning (OBL) method was adopted in this GJO algorithm to obtain the global optimal solution and ensure enhanced performance in finding the solution for the CEED problems. To assess the competitiveness of the IGJO algorithm, it is used for various CEED test problems available in the literature, and results are contrasted with other recent heuristic optimization algorithms. Simulation results show that the proposed IGJO performs more effectively than the other compared algorithms in terms of solution quality, and robustness.

A new identification of Lagrange multipliers to study solutions of nonlinear Caputo–Fabrizio fractional problems

This research aims to provide a new identification of Lagrange multipliers using a novel hybrid method based on the Khalouta transform method and the variational iteration method and to study the solutions of nonlinear fractional problems. This method is called Khalouta variational iteration method (KHVIM). The fractional derivative is considered in Caputo–Fabrizio sense. The uniqueness and convergence results are investigated using Banach fixed point theorem. The results are obtained in the form of successive approximations corresponding to the proposed problem. To demonstrate the accuracy and effectiveness of the proposed method, three different nonlinear fractional partial differential equations are provided. Approximate solutions of the fractional equations were obtained. These solutions quickly converged to exact solutions with lower computational cost. Furthermore, the method used in this study is more generalized and allows our results to be more extensive and cover several new and existing fractional problems in the literature.

Solution of Inverse Geometric Problems Using a Non-Iterative MFS

Solution of Inverse Geometric Problems Using a Non-Iterative MFS

Development of the thermal hydraulic analysis code, TASS/SMR-S, under multi-dimensional motion for a reactor under inclination and rolling conditions

The development of a thermal hydraulic analysis code that considers ship motion is important because it would adjust for additional motion effects that are not present in a land-based system analysis code. The TASS/SMR-S code, a one-dimensional system analysis code, was modified to predict the thermal hydraulic behavior of a nuclear reactor under the conditions of an ocean environment. To validate the improved TASS/SMR-S code, the calculation results were compared with the analytical solutions for a conceptual problem involving swaying, rolling, and compounded motions; experimental data were collected under inclination and rolling conditions. The modified TASS/SMR-S code exhibited good agreement with analytical solutions for the conceptual problem and experimental results obtained under ship motion conditions. In conclusion, the modified code was able to simulate thermal hydraulic behavior under ship motion conditions.

Numerical Solution of Natural Convection Problems Using Radial Point Interpolation Meshless (RPIM) Method Combined with Artificial-Compressibility Model

A numerical method is used to solve the thermal analysis of natural convection in enclosures. This paper proposes the use of an implicit artificial-compressibility model in conjunction with the Radial Point Interpolation Meshless (RPIM) method to mimic laminar natural convective heat transport. The technique couples the pressure with the velocity components using an artificial compressibility model. The RPIM is used to discretize the spatial terms of the governing equation. We solve the semi-algebraic system implicitly in backward Euler pseudo-time. The proposed method solves two test problems—natural convection in the annulus of concentric circular cylinders and trapezoidal cavity. Additionally, the results are validated using experimental and numerical data available in the literature. Excellent agreement was seen between the numerical results acquired with the suggested method and those obtained through the standard techniques found in the literature.

Eduction of coherent structures from schlieren images of twin jets using SPOD informed with momentum potential theory in the spectral domain

Abstract This work presents a methodology to extract coherent structures from high-speed schlieren images of turbulent twin jets which are more physically interpretable than those obtained with currently existing techniques. Recently, Prasad and Gaitonde (J Fluid Mech 940:1–11, 2022) introduced an approach which employs the momentum potential theory of Doak (J Sound Vib 131(1):67–90, 1989) to compute potential (acoustic and thermal) energy fluctuations from the schlieren images by solving a Poisson equation, and combines it with spectral proper orthogonal decomposition (SPOD) to educe coherent structures from the momentum potential field instead of the original schlieren field. While the latter field is dominated by a broad range of vortical fluctuations in the turbulent mixing region of unheated high-speed jets, the momentum potential field is governed by fluctuations which are intimately related to acoustic emission, and its spatial structure in the frequency domain is very organized. The proposed methodology in this paper improves the technique of Prasad and Gaitonde (J Fluid Mech 940:1–11, 2022) in three new ways. First, the solution of the Poisson equation is carried out in the frequency-wavenumber domain instead of the time-space domain, which simplifies and integrates the solution of the Poisson equation within the SPOD framework based on momentum potential fluctuations. Second, the issue of solving the Poisson equation on a finite domain with ad hoc boundary conditions is explicitly addressed, identifying and removing those unphysical harmonic components introduced in the solution process. Third, the solution of the SPOD problem in terms of momentum potential fluctuations is used to reconstruct schlieren SPOD fields associated with each mode, allowing the visualization of the obtained coherent structures also in terms of the density gradient. The method is applied here to schlieren images of a twin-jet configuration with a small jet separation at two supersonic operation conditions: a perfectly-expanded and an overexpanded one. The SPOD modes based on momentum potential fluctuations retain the wavepacket structure including the direct Mach-wave radiation, together with upstream- and downstream-traveling acoustic waves, similar to SPOD modes based on the schlieren images. However, for the same dataset, they result in a lower-rank decomposition than schlieren-based SPOD and provide an effective separation of twin-jet fluctuations into independent toroidal and flapping oscillations that are recovered as different SPOD modes. These coherent structures are more consistent with twin-jet wavepacket models available in the literature than those originally obtained with direct schlieren-based SPOD, facilitating their interpretation and comparison against theoretical analyses. Graphical abstract

Some Boundary Problems, in Sobolev Spaces with Constant Exponents, Governed by the Nonlinear Operator of Plate Vibrations

In this paper, we aim to investigate certain nonlinear boundary problems within Sobolev spaces, where the exponents remain constant. We focus on the dynamically modified operator, incorporating a viscosity term into the nonlinear vibrations of plates. Vibrating plates have a broad range of applications. To address user requirements comprehensively, we've taken into account factors such as the geometric configuration, material density, plate thickness, and Poisson's ratio. After formulating the problems, our method involves converting them into hyperbolic-type nonlinear problems. In this study, we examine six boundary value problems, establishing existence and uniqueness theorems for each. Lastly, we establish the existence of a solution for the stationary problem by employing a variation of Brouwer's fixed point theorem.

An exactly divergence-free hybridized discontinuous Galerkin method for the generalized Boussinesq equations with singular heat source

The purpose of this work is to propose and analyze a hybridized discontinuous Galerkin (HDG) method for the generalized Boussinesq equations with singular heat source. We use polynomials of order k, k−1 and k to approximate the velocity, the pressure and the temperature. By introducing Lagrange multipliers for the pressure, the approximate velocity field obtained by the HDG method is shown to be exactly divergence-free and H(div)-conforming. Under a smallness assumption on the problem data and solutions, we prove by Brouwer’s fixed point theorem that the discrete system has a solution in two dimensions. If the viscosity and thermal conductivity are further assumed to be positive constants, a priori error estimates with convergence rate O(h) and efficient and reliable a posteriori error estimates are derived. Finally numerical examples illustrate the theoretical analysis and show the performance of the obtained a posteriori error estimator. 1991 Mathematics Subject Classification 65N12, 65N30, 65N50, 76N05.

Человек - мессия

This lecture is dedicated to the messianic activity of Louis Pasteur, one of the most outstanding figures in humane and veterinary medicine, the founder of microbiology and immunology, who made the most significant fundamental contribution to the scientific solution of microbiological problems of global significance. Together with his colleagues and followers, he was the first to establish the role of microbes in life on Earth, including in pathology, the bacterial etiology of infectious diseases and the universal nature of anti-infective immunity, discovered the phenomenon of artificially attenuation the pathogenic properties of infectious agents and created means and methods of protection against the most malignant diseases of animals and humans - vaccines against anthrax and rabies, immediately, even during his lifetime, which found wide application in veterinary and medical practice around the world with outstanding socio-economic efficiency.

Relationship between the Significant Solutions of Static Traffic Assignment Problems for Mixed Traffic Flow of Connected and Automated Vehicles and Human-Driven Vehicles

Connected and automated vehicles can reduce the traffic congestion level of the entire network through platoon-driving technologies compared to human-driven vehicles. One promising approach to enhancing platoon-driving technology’s efficiency is deploying dedicated lanes or roads for connected and automated vehicles. Since asymmetric interactions between different vehicle types increase road congestion, it is necessary to distinguish routes for efficient traffic management. However, the traditional traffic assignment problem, which uses only user equilibrium as a constraint with no difference in travel time between users, could not be proposed as a globally optimal solution because it generates an infinite number of locally optimal solutions. Recent studies have attempted to overcome the limitations by considering the sum of system-wide travel times as an additional constraint. Their research sought to help propose optimal deployment strategies through the lowest total travel time solution (best-case) or design robust transport planning strategies through the highest total travel time solution (worst-case). However, past studies have not focused on the possibility of the best/worst case appearing in reality. This study focused on the relationship between the two solutions pointed out in past studies and traffic patterns likely to appear in reality. This study interprets the Karush–Kun–Tucker condition of the static traffic assignment problem, considering the asymmetric interaction, and proposes a solution algorithm using discrete dynamics. The proposed algorithm extends the most widely used method in transportation planning research, which can overcome the limitations of asymmetric interaction problems through simple variations. The proposed algorithm can reliably derive two solutions, and entropy theory shows that both solutions are unlikely to appear in reality without additional policies such as dedicated lanes or roads.

“Being a Girl Has Become a Public Health Problem!”: Feminist Organizations Both Resisting and Reproducing Postfeminist Mental Health Discourses

ABSTRACT An apparent decline in youth mental health in the Nordic countries has received a lot of attention over the last decade, and young women have been described as a particularly vulnerable group. To combat the problem, political debate has centred on solutions at the individual level, despite significant evidence of the associations between structural factors and adverse mental health. In this article, I explore how two feminist support organizations working for young women in Sweden (tjejjourer) frame and address girls’ mental health as a problem of feminist concern. Interviews with staff, organizational documents, websites, social media, and other communications were analysed following Snow and Benford’s theory on collective action frames, to identify the organizations’ problem diagnoses, solutions, and motivational frames for action. The results show that the organizations both reiterate and resist a postfeminist discourse on mental health. There is notable friction between structural problem diagnoses, based on intersectional analyses of power, and political demands and support oriented towards the individual. In conclusion, I argue that this friction may be a result of the organizations’ adoption of discourses on risk, vulnerability, and mental health itself, but also that the complex relationship between structural critique and individual care is indispensable for feminist organizing.

Terminal Synergetic Control for Plate Heat Exchanger

Terminal synergetic control (TSC) is proposed as a control strategy for the temperature management of a plate heat exchanger. The controller is designed by incorporating a selected macro variable with a time-varying sliding surface. The primary objective is to maintain precise control over the outlet temperature of the cold water. To assess the convergence characteristics of the newly proposed TSC approach, the simulation results achieved using TSC featuring a time-varying macro variable are compared to those obtained from the conventional synergetic control (SC) method. With an appropriate macro variable, the simulation results indicate a notable improvement in the convergence rate provided by our designed TSC method, compared to the conventional one. The desirable property of control input, the chattering-free condition, achieved by both TSC and SC approaches emphasizes the advantage of the synergetic control-based techniques over the conventional sliding mode controller. In conclusion, synergetic control-based techniques offer superior potential solutions for nonlinear feedback control problems.

Exponential Stability of the Numerical Solution of a Hyperbolic System with Nonlocal Characteristic Velocities

In this paper, we investigate the problem of the exponential stability of a stationary solution for a hyperbolic system with nonlocal characteristic velocities and measurement error. The formulation of the initial boundary value problem of boundary control for the specified hyperbolic system is given. A difference scheme is constructed for the numerical solution of the considered initial boundary value problem. The definition of the exponential stability of the numerical solution in ℓ2-norm with respect to a discrete perturbation of the equilibrium state of the initial boundary value difference problem is given. A discrete Lyapunov function for a numerical solution is constructed, and a theorem on the exponential stability of a stationary solution of the initial boundary value difference problem in ℓ2-norm with respect to a discrete perturbation is proved.

A new method for determining crack propagation

This paper presents a new method for obtaining approximate closed-form solutions for crack propagation problems. In general, it is not possible to obtain explicit solutions of the parameters and elementary functions of these problems, due to their terms complexity, present in their definitions. In this way, we used numerical methods to obtain approximate numerical solutions. The method presented in this article provides a proposal, which, when defined by differential equations, is applicable and extensible to other problems. The approximate solutions are obtained as an exact solution of a modified initial value problem. The performance is evaluated in relation to problems with known exact solution.

Existence of positive weak solutions for stationary fractional Laplacian problem by using sub-super solutions

Abstract In this work, we establish a theorem concerning the extension of positive weak solutions for a stationary fractional Laplacian problem featuring weight functions that change sign. Additionally, we introduce novel conditions to ensure the existence of a positive solution for the given problem. These conditions are derived utilizing the approach of sub-super solutions, thereby extending and complementing existing results in the literature.

Optimal design of elastic plates

This paper is concerned with optimal design problems in the setting of the KirchhoffLove model for pure bending of a thin solid symmetric plate under a transverse load. For two isotropic elastic materials with a prescribed amount, the goal is to find their rearrangement within the domain that forms a least compliant structure. The homogenization method is used as a relaxation tool to overcome the lack of a classical solution of optimal design problem. Neccessary conditions of optimality were derived and an optimality criteria method for the single state compliance minimization problems is developed and tested on several examples.

Three-Body 3D-Kepler Electromagnetic Problem—Existence of Periodic Solutions

The main purpose of the present paper is to prove the existence of periodic solutions of the three-body problem in the 3D Kepler formulation. We have solved the same problem in the case when the three particles are considered in an external inertial system. We start with the three-body equations of motion, which are a subset of the equations of motion (previously derived by us) for any number of bodies. In the Minkowski space, there are 12 equations of motion. It is proved that three of them are consequences of the other nine, so their number becomes nine, as much as the unknown trajectories are. The Kepler formulation assumes that one particle (the nucleus) is placed at the coordinate origin. The motion of the other two particles is described by a neutral system with respect to the unknown velocities. The state-dependent delays arise as a consequence of the finite vacuum speed of light. We obtain the equations of motion in spherical coordinates and split them into two groups. In the first group all arguments of the unknown functions are delays. We take their solutions as initial functions. Then, the equations of motion for the remaining two particles must be solved to the right of the initial point. To prove the existence–uniqueness of a periodic solution, we choose a space consisting of periodic infinitely smooth functions satisfying some supplementary conditions. Then, we use a suitable operator which acts on these spaces and whose fixed points are periodic solutions. We apply the fixed point theorem for the operators acting on the spaces of periodic functions. In this manner, we show the stability of the He atom in the frame of classical electrodynamics. In a previous paper of ours, we proved the existence of spin functions for plane motion. Thus, we confirm the Bohr and Sommerfeld’s hypothesis for the He atom.

Correction: Solution of linear and nonlinear singular value problems using operational matrix of integration of Fibonacci wavelets

Correction: Solution of linear and nonlinear singular value problems using operational matrix of integration of Fibonacci wavelets

An extended graphical solution for undrained cylindrical cavity expansion in K0‐consolidated Mohr–Coulomb soil

AbstractThis paper develops a general and complete solution for the undrained cylindrical cavity expansion problem in nonassociated Mohr‐Coulomb soil under nonhydrostatic initial stress field (i.e., arbitrary values of the earth pressure coefficient), by expanding a unique and efficient graphical solution procedure recently proposed by Chen and Wang in 2022 for the special in situ stress case with . It is interesting to find that the cavity expansion deviatoric stress path is always composed of a series of piecewise straight lines, for all different case scenarios of K0 being involved. When the cavity is sufficiently expanded, the stress path will eventually end, exclusively, in a major sextant with Lode angle θ in between and or on the specific line of . The salient advantage/feature of the present general graphical approach lies in that it can deduce the cavity expansion responses in full closed form, nevertheless being free of the limitation of the intermediacy assumption for the vertical stress and of the difficulty existing in the traditional zoning method that involves cumbersome, sequential determination of distinct Mohr–Coulomb plastic regions. Some typical results for the desired cavity expansion curves and the limit cavity pressure are presented, to investigate the impacts of soil plasticity parameters and the earth pressure coefficient on the cavity responses. The proposed graphical method/solution will be of great value for the interpretation of pressuremeter tests in cohesive‐frictional soils.