Solubility In Aqueous Solutions Research Articles

Anticancer activity of new water-soluble sulfonated thiosemicarbazone copper(II) complexes targeting disulfide isomerase

Copper complexes have shown promising anticancer properties, but they are often poorly soluble in aqueous solutions, thus limiting their possible medical developments and applications. We have recently isolated some copper(II) complexes with salicylaldehyde thiosemicarbazone ligands exhibiting remarkable nanomolar cytotoxic activity, but in vivo tests evidenced several difficulties related to their poor solubility. To overcome these limitations and increase solubility in aqueous solution, herein we report the synthetic strategy that led to the introduction of the sulfonic group on the ligands, then separated as salts (NaH2L1 - NaH2L5), as well as the synthesis and characterization of the related copper(II) complexes. The characterization of the complexes is completed by the analysis of the structures obtained by X-rays diffraction on single crystals on the species [Cu(HL5)(H2O)]2.2H2O, [Cu(HL2)(H2O)2].2H2O, and [Cu(HL1)(H2O]2.2H2O. While the uncoordinated ligands do not affect cancer cell viability, copper(II) complexes exhibit low to sub-micromolar cytotoxic activity, which is maintained in 3D (HCT-15 and 2008) spheroidal models of cancer cell. Notably, copper(II) complexes were selective towards cancer cells, showing high selectivity indexes. Investigations focused on elucidating the mechanism of action evidenced the protein disulfide-isomerase as an innovative molecular target for this class of water-soluble copper(II) complexes. Finally, preliminary in vivo experiments performed with the most representative derivative in the murine Lewis Lung Carcinoma, highlight its significant antitumor efficacy and better tolerability profile with respect to the reference metallodrug, suggesting for this sulfonated Cu(II) complex a potential clinical relevance.

Dispersion of Single-Walled Carbon Nanotubes by Aromatic Cyclic Schiff Bases via Non-Covalent Interactions.

One of the challenging issues that hinders the application of single-walled carbon nanotubes (SWCNTs) is the poor solubility and the inevitable formation of bundles. Efforts still need to be made towards solving the problem. Herein, we report a non-covalent strategy to disperse aggregated SWCNTs by aromatic cyclic Schiff bases assisted by ultrasonic techniques. The aromatic cyclic Schiff base (OMM) was synthesized via Schiff base reactions, and the molecular structure was determined by ATR-FT-IR, solid-state 13C-NMR, and HRMS. Although the yielded product showed poor solubility in aqueous solution and organic solvents, it could interact with and disperse the aggregated SWCNTs in dimethyl formamide (DMF) under the condition of ultrasound. UV-vis-NIR, FL, Raman spectra, AFM, and TEM, along with computer simulations, provide evidence for the interactions between OMM molecules and SWCNTs and the dispersion thereof. The semiconductive (7,5), (8,6), (12,1), and (9,7)-SWCNTs expressed a preference for dissolution. The capability of dispersion is contributed by π-π, C-H·π, and lone pair (lp)·π interactions between OMM and SWCNTs based on the simulated results. The present non-covalent strategy could provide inspiration for preparing organic cyclic compounds as dispersants for SWCNTs and then facilitate their further utilization.

Investigation on itraconazole solubility in aqueous solutions based on models, solvent effect, thermodynamic analysis and quantum chemical calculations

The mole-fraction solubility of itraconazole in four aqueous blends of ethanol/isopropanol/DMSO/methanol within the temperature range of 283.15 to 323.15 K was experimentally obtained using the isothermal shake-flask method. Under the identical temperature and ethanol/isopropanol/DMSO/methanol composition, itraconazole solubility in DMSO+water is much higher than that in ethanol/isopropanol/methanol + water. At the same temperature, the solubility increases monotonically with organic solvent concentration. X-ray power diffraction analysis demonstrated that over the course of the investigations, there was no crystal transition or solvate formation. The modified van’t Hoff-Jouyban-Acree and Jouyban-Acree models adequately related the solubility to solvent composition and temperature, with relative average deviations (RADs) not exceeding 7.65 %. Furthermore, the extended Hildebrand solubility approach was utilized to quantitatively characterize the solubility behavior at 298.15 K for the mixtures of ethanol/isopropanol/DMSO/methanol plus water. In both instances, the RADs were maintained below 4.12 %. The solubility parameter and dipolarity-polarizability of solutions have a major impact on the solubility fluctuation, as indicated by the analysis of the linear solvation energy relationship. The preferential solvation of itraconazole at 298.15 K was examined using the efficient approach of inverse Kirkwood-Buff integrals. The preferred solvation parameters showed positive values in blends within rich and moderate ethanol/isopropanol/DMSO/methanol composition regions. This suggests that the organic solvents preferentially solvated itraconazole. When itraconazole dissolved in the blends, thermodynamic analysis of the entropy-enthalpy compensation and dissolution parameters revealed both an endothermic and an enthalpy-driven mechanism. Furthermore, the microscopic electrostatic characteristics of basicity and acidity were effectively demonstrated by means of the electrostatic potential of molecular surface. The −C=O and −N=groups of the itraconazole molecule, which link the five-membered ring, are the primary targets of the electrophilic attack. An independent gradient model based on Hirshfeld partition analysis was used to demonstrate the weak interactions between itraconazole and solvents.

Preparation, characterization and evaluation of HPβCD-PTX/PHB nanoparticles for pH-responsive, cytotoxic and apoptotic properties

Paclitaxel (PTX) is a potent anticancer drug. However, PTX exhibits extremely poor solubility in aqueous solution along with severe side effects. Therefore, in this study, an inclusion complex was prepared between PTX and hydroxypropyl-β-cyclodextrin (HPβCD) by solvent evaporation to enhance the drug's solubility. The HPβCD-PTX inclusion complex was then encapsulated in poly-3-hydroxybutyrate (PHB) to fabricate drug-loaded nanoparticles (HPβCD-PTX/PHB NPs) by nanoprecipitation. The HPβCD-PTX/PHB NPs depicted a higher release of PTX at pH 5.5 thus demonstrating a pH-dependent release profile. The cytotoxic properties of HPβCD-PTX/PHB NPs were tested against MCF-7, MDA-MB-231 and SW-620 cell lines. The cytotoxic potential of HPβCD-PTX/PHB NPs was 2.59-fold improved in MCF-7 cells in comparison to free PTX. Additionally, the HPβCD-PTX/PHB NPs improved the antimitotic (1.68-fold) and apoptotic (8.45-fold) effects of PTX in MCF-7 cells in comparison to PTX alone. In summary, these pH-responsive nanoparticles could be prospective carriers for enhancing the cytotoxic properties of PTX for the treatment of breast cancer.

Albumin-mediated molecular competition of supramolecular photosensitizers for NIR-II imaging-guided phototherapy

Heptamethine cyanines (Cy7) typically exhibit strong near-infrared (NIR) fluorescence signals when in monodisperse states, but their distinctive π-conjugated structure leads to limited solubility in aqueous solutions, ultimately resulting in inherent fluorescence self-quenching. Enhancing the fluorescence quantum yield of these agents within aqueous environments, in order to achieve high-resolution biological imaging, presents a significant challenge. Herein, a benzothiazole-based Cy7-derivative (Cy7-BTH) is developed, exhibiting unique H-aggregation properties in aqueous solutions. Bovine serum albumin (BSA) binds to Cy7-BTH (BSA@Cy7-BTH) to modulate its molecular stacking and energy transfer, boosting its fluorescence accompanied by bright NIR-II tail emission. The competitive binding alters the planarity of Cy7-BTH, restricting its intramolecular rotation, and simutaneously changes the conformation of BSA, leading to BSA@Cy7-BTH aggregation to form hierarchical-structured nanoparticles. Notably, the BSA@Cy7-BTH nanoparticles significantly enhanced photothermal response of Cy7-BTH while maintaining its controlled reactive oxygen species (ROS) generation, offering NIR-II imaging-guided surgical removal of primary tumors, and simultaneously inhibiting cancer cell metastasis by synergistic PDT/PTT dissection of metastatic tumor cells in sentinel lymph nodes (SLNs). This study provides an innovative but facile strategy for their potential clinical applications by precisely regulating the intermolecular competitive interactions of NIR theranostic agents.

The development of ternary and quaternary solid dispersion based hydrotropic blends of atorvastatin calcium

Background and objective: Atorvastatin calcium (ATV) has a solubility in aqueous solutions of greater than 0.1 mg/ml to less than 1 mg/ml, which is very slightly soluble. When developing dosage forms for these medications, formulation scientists still face challenges. This study's goal was to use various hydrotropic agents in the formation of solid dispersion-based hydrotropic blends to improve the solubility properties of atorvastatin calcium. Methods: In this study, twenty-two distinct binary, ternary, and quaternary formulations of ATV were prepared by employing five different hydrotropic agents and combining at least two hydrotropic agents in concentrations of 10% and 20% (w/v). Moreover, solid dispersion by the solvent evaporation method and physical mixture-based hydrotropic blends in the ratio of (1:2) have been formulated. The produced formulations were characterized using an FTIR analysis. Results: According to the findings, binary formulations containing 20% (w/v) concentrations of sodium benzoate (SB), sodium salicylate (SS), and resorcinol (R) enhanced the solubility ratio of ATV by 439.31, 689.57, and 106.21 folds, respectively. Furthermore, ternary formulations (FT14) and quaternary formulations (FQ18) resulted in the enhancement of ATV solubility by 938.45 and 995.12 folds, respectively. Ternary solid dispersion demonstrated the highest enhancement in solubility ratio by 87.68 folds and resulted in a higher dissolution rate of ATV than pure samples of the drug. Finally, FTIR analyses excluded any interactions between medications and excipients by showing no noticeable shift in the peaks. Conclusion: Solid dispersion based hydrotropic blends can provide the production of the dosage forms of practically insoluble drugs with a favorable enhancement ratio in solubility.

Development of heat-assisted in-situ solvent formation liquid phase microextraction followed by derivatization for the simultaneous extraction of aliphatic amines from wastewater samples prior to gas chromatography-mass spectrometry

Herein, a cost-effective, rapid, and selective liquid phase microextraction procedure has been developed for the extraction of some aliphatic amines from sewage samples. The method was based on in-situ formation of chloroform as an extraction solvent into the sample solution followed by derivatization by butylchloroformate prior to gas chromatography- mass spectrometry. Chloroform is formed by the reaction of chloral hydrate and sodium hydroxide. The extraction procedure was accelerated by heating. Also heating decreases chloroform solubility in aqueous solution. To improve the analytical signals, derivatization of the analytes is done by butylchloroformate. The effect of major parameters on the extraction efficiency were studied and optimized. Under the optimized conditions, enrichment factor and extraction recovery were in the ranges of 259–296 and 78–89 %, respectively. Low limits of detection (0.08–0.12 ng mL−1) and quantification (0.28–0.41 ng mL−1), wide linear ranges, and relative standard deviations less than 6 % for intra −and inter-day precisions were acceptable. Lastly, the mentioned method was successfully performed to determine aliphatic amines in wastewater samples.

Performance and mechanism of siderite/zero-valent nickel composite material for removing Se(IV) from solution

79Se is a fission product in spent fuel with a half-life of up to 6.5 × 104 a, which is not controlled by solubility in aqueous solution and has strong mobility. These characteristics make it highly susceptible to migration in groundwater. Meanwhile, due to the negative charge of selenium ions, they are difficult to be fixed by buffer/backfill materials, engineering materials, geological materials and commonly used adsorption methods in near-field geochemical environments. Therefore, the fixation of 79Se has become a hot and difficult research topic both domestically and internationally. Therefore, this article aimed to simulate the removal of radioactive nuclide Se(IV) from high-level radioactive waste disposal repositories. On the basis of siderite (FeCO3), by adding zero-valent nickel (Ni0) and continuously optimizing sample preparation conditions, an economical, efficient and stable siderite/zero-valent nickel (FeCO3/Ni0) composite material was successfully prepared. Experimental studies on the removal of Se(IV) from solution were conducted under different conditions and the material was characterized using various modern methods from macro and micro perspectives, the performance and mechanism of FeCO3/Ni0 composite material for removing Se(IV) was explored deeply. The research results indicated that FeCO3/Ni0 had high potential as a candidate adsorbent for the removal of Se(IV) due to its easy synthesis, low-cost, high adsorption capacity and strong reduction.

삼원계를 통한 페북소스타트 고체분산체 개발 및 평가

Febuxostat is classified as a biopharmaceutical with low solubility in aqueous solution and high intestinal permeability (Biopharmaceutics Classification System [BCS] Class II drug). The solubility of a drug has the characteristic of increasing as pH increases. This study aims to improve the dissolution of febuxostat with Neusilin® US2 and Gelucire®50/13 by a solvent evaporation method. The optimal formulation (solid dispersion, SD1) is developed as a solid dispersion of febuxostat : Gelucire®50/13 : US2®= 1:2:4 (w/w), with a final weight of 280 mg. The dissolution of SD1 in distilled water is 72.0±2.8%, which is 1.67-fold higher than that of the commercial product, Feburic Tab® (43.2±1.8%). The SD1 formulation is believed to have improved dissolution due to changes in physicochemical properties (thermal, interaction, and crystallinity). In conclusion, through the solid dispersion manufacturing method, febuxostat is changed from a crystalline form to an amorphous form in SD1 formulation, and the improved dissolution of febuxostat formulation is developed.

Numerical investigation of carbon dioxide capture using nanofluids via machine learning

Using nanofluids to capture CO2 is a promising method of reducing emissions. The goal of this study was to develop models that could forecast how well water-based nanofluids would absorb CO2. Several machine learning models, such as Decision Tree, Random Forest, eXtreme Gradient Boosting, and K-Nearest Neighbors, underwent training using a total of 1306 experimental datasets. These datasets contained information on the CO2 solubility in aqueous solutions for different types of nanoparticles. In terms of Average Absolute Relative Deviation (AARD%), Mean Absolute Error (MAE), Relative Absolute Error, Mean Squared Error, and Correlation Coefficient, the predictive performance on separate test data was assessed. The XGBoost model demonstrates a higher degree of accuracy in simulating the absorption capacity of aqueous nanofluid compared to other models. This is evident through the AARD value of 2.8%, MSE of 0.00084, MAE of 0.012 and an R value of 0.992. The research provides insight into the utilization of different machine learning algorithms for simulating the absorption of CO2 by nanofluids. By employing accurate data-driven models, the efficiency of nanofluid-based CO2 capture processes can be enhanced through improvements in their design and operating conditions.

Microalbuminuria sensitive near‐infrared AIE probe for point‐of‐care evaluating kidney diseases

AbstractUrinary microalbumin (mALB) serves as an exceptionally sensitive indicator for the early detection of kidney damage, playing a pivotal role in identifying chronic renal failure and kidney lesions in individuals. Nevertheless, the current fluorescent methodologies for point‐of‐care (POC) diagnosis of mALB in real urine still exhibit suboptimal performance. Herein, the development and synthesis of QM‐N2, an albumin‐activated near‐infrared (NIR) aggregation‐induced emission (AIE) fluorescent probe, are presented. The strategic incorporation and positioning of quaternary ammonium salts within the quinoline‐malononitrile (QM) scaffold significantly influence solubility and luminescence characteristics. Specifically, the quaternary ammonium salt‐free variant, QM‐OH, and the quaternary ammonium salt integrated at the donor function group (DFG) site, QM‐N1, display limited solubility in aqueous solutions while demonstrating a distinct fluorescence signal. Conversely, the incorporation of quaternary ammonium salt at the conformational functional group (CFG) site in QM‐N2 imparts superior dispersibility in water and reduces the initial fluorescence. Furthermore, the integration of a well‐defined D‐π‐A structure within QM‐N2 enables itself with near‐infrared emission, which is crucial for mitigating interference from autofluorescence present in urine samples. Upon interaction with albumin, QM‐N2 forms a tight bond with the IIA site of the subdomain of human serum albumin (HSA), inducing alterations in protein configuration and constraining the intrinsic motion of fluorescent molecules. This interaction induces fluorescence, facilitating the sensitive detection of trace albumin. Ultimately, QM‐N2 is applied for POC testing of mALB using portable equipment, particularly in the diagnosis of mALB‐related diseases, notably chronic renal failure. This positioning underscores its potential as an ideal candidate for self‐health measurement at home or in community hospitals.

Re-engineering and regulating molecular architecture of synthetic capsaicin for enhanced water-based degradation performance

Synthetic capsaicin, also known as pelargonic acid vanillylamide (PAVA), constitutes the primary component in riot control agents. Due to the propensity of PAVA agglomerated in aqueous environments, the interaction between the active site of PAVA molecular and catalyst was restricted, consequently reducing its degradation efficiency in water-based oxidizing agents. This study used a cationic surfactant, dodecyl trimethyl ammonium chloride (DTAC), in combination with KOH for the precise regulation and arrangement of PAVA molecules, resulting in the formation of a distinctive hydrophilic structure. This approach resolved its poor solubility in aqueous solutions while the relationship between solubility and degradation rate was obtained. The frontier orbital distribution and surface electrostatic potential distribution of PAVA molecular were predicted through first-principles calculation. The mechanism of PAVA solubilization was studied by 1H NMR techniques and infrared spectroscopy methods. The results showed that KOH substitutes the phenolic hydroxyl group “–OH” of PAVA, forming potassium phenoxide “–OK”, which enhanced the solubility of PAVA in water. Additionally, KOH might reduced the surface tension in the solution. It promotes the formation of the DTAC/PAVA complex micelle structure, which exhibited the PAVA agglomerates to exposing the catalytic activation reaction sites and accelerating the catalytic oxidation.

Co3O4/NiCo2O4 heterojunction as oxygen evolution reaction catalyst for efficient luminol anode electrochemiluminescence

Luminol has garnered significant attention from analysts as one of the most effective and commonly used electrochemiluminescence (ECL) reagents. However, the efficient luminescence of luminol anode is limited by the excitation of various reactive oxygen species (ROS). Typically, ROS are generated through co-reactive reagents and dissolved oxygen. Unfortunately, the former suffers from two drawbacks, namely biotoxicity and instability, while the latter cannot offer sufficient oxygen due to its limited solubility in aqueous solutions. Consequently, a low decomposition rate is usually obtained, leading to insufficient ROS. Therefore, there is an urgent need to develop efficient luminol anode systems. This study focuses on the use of zeolitic imidazolate framework-67 (ZIF-67) as a template, employing a controlled chemical etching method to create a ZIF-67/Ni-Co-layered double hydroxide (LDH). The intermediate composite is then annealed in air, resulting in the formation of a Co3O4/NiCo2O4 double-shelled nanobox (DSNB) heterostructure. Due to its structural advantages, the DSNB exhibits excellent electrocatalytic performance in the oxygen evolution reaction (OER). Furthermore, it was found that both the intermediates and products of OER can directly participate in the luminol chemiluminescence process, ultimately resulting in a 700-fold increase in the electrochemiluminescence (ECL) signal compared to an equal molar concentration of luminol solution. This work not only establishes the OER-mediated ECL system but also deepens the understanding of the relationship between ROS and luminol, providing a new pathway to study the luminol anodic ECL luminescence system.

Quantification of crystallinity during indomethacin crystalline transformation from α- to γ-polymorphic forms and of the thermodynamic contribution to dissolution in aqueous buffer and solutions of solubilizer.

The thermodynamic properties and dissolution of indomethacin (INM) were analyzed as models for poorly water-soluble drugs. Physical mixtures of the most stable γ-form and metastable α-form of INM at various proportions were prepared, and their individual signal intensities proportional to their mole fractions were observed using X-ray powder diffraction and Fourier transform infrared spectrometry at standard temperature. The endothermic signals of the α-form, with a melting point of 426 K, and that of the γ-form, with a melting point of 433 K, were obtained by differential scanning calorimetry (DSC). Furthermore, an exothermic DSC peak of the α/γ-phase transition at approximately 428 K was obtained. As we computed the melting entropy of the α-form and that of its transformation, the frequency of the transition was quantitatively determined, which indicated the maximum of the α/γ-phase transition at an α-form proportion of 68%. Subsequently, the thermodynamic contributions of the α- and γ-forms were analyzed using a Van't Hoff plot for solubility in aqueous solutions at pH 6.8. The dissolution enthalpies for α- and γ-forms were 28.2 and 31.2 kJ mol-1, respectively, which are in agreement with the quantitative contribution predicted by the product of the temperature and melting entropy. The contribution of melting entropy was conserved in different dissolution processes with aqueous solvents containing lidocaine, diltiazem, l-carnosine, and aspartame as solubilizers; their γ-form Setschenow coefficients were -39.6, +82.9, -17.3, and +23.2, whereas those of the α-form were -39.7, +80.4, -16.7, and +22.7, respectively. We conclude that the dissolution ability of the solid state and solubilizers indicate their additivity independently.

Uniform trehalose nanogels for glucagon stabilization.

Glucagon is a peptide hormone that acts via receptor-mediated signaling predominantly in the liver to raise glucose levels by hepatic glycogen breakdown or conversion of noncarbohydrate, 3 carbon precursors to glucose by gluconeogenesis. Glucagon is administered to reverse severe hypoglycemia, a clinical complication associated with type 1 diabetes. However, due to low stability and solubility at neutral pH, there are limitations in the current formulations of glucagon. Trehalose methacrylate-based nanoparticles were utilized as the stabilizing and solubilizing moiety in the system reported herein. Glucagon was site-selectively modified to contain a cysteine at amino acid number 24 to covalently attach to the methacrylate-based polymer containing pyridyl disulfide side chains. PEG2000 dithiol was employed as the crosslinker to form uniform nanoparticles. Glucagon nanogels were monitored in Dulbecco's phosphate-buffered saline (DPBS) pH 7.4 at various temperatures to determine its long-term stability in solution. Glucagon nanogels were stable up to at least 5 months by size uniformity when stored at -20 °C and 4 °C, up to 5 days at 25 °C, and less than 12 hours at 37 °C. When glucagon stability was studied by either HPLC or thioflavin T assays, the glucagon was intact for at least 5 months at -20 °C and 4 °C within the nanoparticles at -20 °C and 4 °C and up to 2 days at 25 °C. Additionally, the glucagon nanogels were studied for toxicity and efficacy using various assays in vitro. The findings indicate that the nanogels were nontoxic to fibroblast cells and nonhemolytic to red blood cells. The glucagon in the nanogels was as active as glucagon alone. These results demonstrate the utility of trehalose nanogels towards a glucagon formulation with improved stability and solubility in aqueous solutions, particularly useful for storage at cold temperatures.

Exploring novel Cd(II) complexes with 5-methyl-4-imidazolecarboxaldehyde: synthesis, structure, computational insights, and affinity to DNA through switchSense methodology.

A series of four Cd(II) complexes with 5-methyl-4-imidazolecarboxaldehyde (L) with different inorganic anions within or outside the coordination sphere of general formula: [CdCl2L2] (1), [CdBr2L2] (2), [CdI2L2] (3), and [CdL4](PF6)2·3H2O (4) was synthesized through one-step and two-step reactions, respectively. All complexes were obtained as colorless crystals without the need for recrystallization and exhibited solubility in aqueous solutions. Structural analysis revealed different coordination environments for each complex, with variations in bond lengths and angles. The crystal packing of the complexes was stabilized by hydrogen bonding and π-π stacking interactions. FT-IR analysis indicated coordination of the ligand to the metal ion, and UV-Vis studies confirmed the stability of the complexes in solution. Computational analysis has revealed the polar nature of the complexes and their favorable stability constants. Affinity studies with DNA using the switchSense technique demonstrated rapid association and dissociation processes for all complexes, with temperature-dependent binding constants. Thermodynamic analysis suggested spontaneous with positive entropy change and endothermic formation processes for the complexes. Overall, the study underscores the synthesis, examination, and interaction with DNA of Cd(II) complexes, demonstrating their promise within medicinal chemistry.

Possibilities for improving the technology of roasting zinc concentrates

The paper presents an investigation into the oxidation process of zinc sulfide concentrate. A common challenge encountered during the fluidized calcination process is the high concentration of sulfide sulfur in the condensed products, such as the mixture collected at the furnace threshold and in the dust. This scientific work reports the results of laboratory studies aimed at improving the technology of roasting zinc concentrates. The study's objective was to obtain zinc cinders with increased solubility in aqueous solutions by roasting sulfide zinc concentrates. The results show that the optimal composition of the charge for roasting was determined using limestone and wastewater from the processing plant, which contains alkaline earth metal oxides. This composition helped reduce the formation of ferrites and silicates by 1.5-1.7 times.

TECHNOLOGIES FOR WASTEWATER TREATMENT FROM ARSENIC

The current recycling water supply of metallurgical enterprises does not completely eliminate the discharge of wastewater into environmental water bodies, where the maximum permissible concentration (MPC) of arsenic is 0.05 mg/dm3. Arsenic accumulates in large quantities in washing solutions for cleaning exhaust gases sent to produce sulfuric acid. In this case, a closed gas washing system is used, aimed at concentrating the washing water with arsenic to 10 g/dm3 and sulfuric acid to 40 g/dm3 in order to reduce the volume of wastewater discharge. Another source of arsenic contamination of the hydrosphere is the waters of tailings from enrichment plants, due to the possible oxidation of arsenopyrite and the formation of a soluble form of arsenic compounds.
 A number of methods for arsenic precipitation have been developed: pyrolusite, lime in the form of calcium arsenate; ions of ferric iron and other metals; adsorption by iron (III) hydroxide, aluminum hydroxide, carbon, etc.; sludge flotation; metal sulfides, sorption and extraction. The main criterion for the operation of purifying a solution from arsenic is the possibility of recycling the resulting sediment or the formation of its compounds with minimal solubility in aqueous solutions, allowing its burial in burial grounds.

Effect of Selenium on Dissolution of Manganese Sulfide Inclusions in Stainless Steel

The pit initiation sites for commercial stainless steels have been attributed to sulfide inclusions such as MnS. The chemical composition of the inclusions affects the pitting corrosion resistance of stainless steels.1,2 It is known that the inclusion solubility in aqueous solutions affects pitting corrosion resistance. The dissolution of sulfide inclusions produces S species and exposes the bare surface of the steel matrix, resulting in high pitting susceptibility near the inclusions. Selenium is known to improve the machinability of stainless steels. However, the effect of selenium on the dissolution and pit initiation of MnS inclusions in stainless steels remains unclear. In this study, a microelectrochemical technique was applied to analyze the effect of Se on the dissolution and pit initiation of MnS inclusions in stainless steels.Two re-sulfurized stainless steels were prepared by vacuum induction melting: one was Se-free, and the other was Se-added. The specimens were heat-treated at 1373 K for 30 min and quenched in water. After heat treatment, the specimens were polished with 1 µm diamond paste. Polarization curves were measured in 0.1 M NaCl and 0.1 M Na2SO4. An optical microscope and a scanning electron microscope equipped with an energy dispersive X-ray spectroscopy system were used to capture images of the specimen surfaces.

(Invited) Selective and Efficient Electrochemical CO2 Reduction Reaction from Cu and Cu-M Binary Alloys

Electrochemical CO2 reduction reaction (CO2RR) has attracted a great deal of attention due to its potential to convert CO2 into valuable chemical fuels and feedstocks. The production of C2+ chemicals, such as ethylene and ethanol, from CO2RR is particularly important because of their large market demand. However, several challenges must be addressed before CO2RR can be commercially scaled up, including high overpotential, low selectivity, and poor CO2 solubility in aqueous solutions. In this presentation, I will discuss our recent efforts to overcome these challenges in CO2RR by using a gas diffusion electrode (GDE) to achieve a CO2RR current density of over 100 mA/cm2 in a flow reactor. First, I will highlight the crucial role of the local CO2RR environment in promoting C-C coupling on Cu surfaces, and I will present strategies for controlling this environment based on steady-state modeling and monodisperse Cu2O nanoparticles as a model catalyst system. Using this approach, we have been able to produce C2+ products, such as ethylene and ethanol, with a Faraday efficiency of over 70% at a current density of over 300 mA/cm2 in near-neutral electrolytes. Additionally, I will discuss the impact of alloying Cu with Ni and Zn on tailoring product selectivity. By introducing elements with different CO binding strengths, we can significantly alter the selectivity for hydrocarbons and alcohols. I will provide further details on these findings during the presentation.