Solid-state Organization Research Articles

Symmetrical Diacetylenes Outfitted with Ionic Liquid-like Groups: Structural, Polymerization, and Carbonization Studies

Three symmetrical diacetylenes (DAs) bearing tetraalkylammonium substituents have been prepared, namely, 1,6-bis(triethylammonium)hexa-2,4-diyne diiodide (2), dinitrate (3), and bis[bis(trifluoromethylsulfonyl)imide] (4). For these three salts, the duality between polymerization and carbonization has been investigated, and the results have been rationalized in terms of solid-state organization and molecular structure. These DAs have been irradiated at 254 nm with concomitant annealing at 80 °C (4) or 110 °C (2 and 3), and the lack of polydiacetylene (PDA) formation is in agreement with the fact that the C≡C–C≡C rods do not have a suitable orientation for 1,4-addition. Compound 4 is an ionic liquid. This DA starts melting at 88 °C with a maximum peak value of 104 °C, as ascertained by differential scanning calorimetry and thermogravimetric analyses. It is stable in the liquid state at 120 °C for several hours and remains unchanged at 170 °C for a few minutes without any sign of PDA formation, which means that if some kind of organization exists in the liquid phase, it is not helpful for 1,4-polymerization. Thermolyses of 2–4 have been conducted under a nitrogen flow up to 220 °C (3) and 1200 °C (2 and 4). In all three cases, graphite-like carbon materials were obtained. The graphite-like structures start to form around 200 °C, which is the temperature at which cycloaromatization of the triple bonds takes place. The residues from the pyrolyses of 2 and 4 exhibit nitrogen contents of 1.75 and 1.40 wt %, respectively, and powder X-ray diffraction and Raman analyses indicate that these materials have coherently scattering domain sizes in the range of 1–3 nm depending on the crystallographic direction. The Brunauer, Emmett, and Teller specific surface area of 2@1200 derived from dinitrogen sorption experiments is 88 m2 g–1 and that of 4@1200 is 33 m2 g–1. These values are much higher than those measured in previous works for carbon residues prepared at 1100 °C from imidazolium- and benzimidazolium-appended diacetylenes, thereby highlighting the pivotal influence of the size of the cation on the microstructure of the resulting carbon material. In addition, 2@1200 appears to be mostly microporous and 4@1200 mesoporous, which suggests that the anion also plays a central part in the structuring of the final solid. Last, X-ray photoelectron spectroscopy analysis of 4@1200 indicates that, besides nitrogen, this residue also contains small amounts of fluorine and sulfur, thus making carbonization of ionic diacetylenes an alternative method to introduce doping elements in a graphite structure.

Development of the P-Arylation of Dithieno[3,2-b : 2',3'-d]phosphole with Aryl Iodonium Salts.

P-Arylation of dithieno[3,2-b : 2',3'-d]phosphole toward cationic phenyl phospholium species using diaryliodonium reagents was explored. Multiple conditions were tested to optimize the reaction, including variation of solvent, temperature, stoichiometry, time, and aryliodonium species employed. Initial use of diphenyliodonium chloride led to an unexpected dithienophosphole Cu(I) chloride complex that was characterized crystallographically. Alternatively, the use of diphenyliodonium hexafluorophosphate in ethanol under microwave conditions led to the successful isolation of the P-arylated target. The phenyl dithienophospholium species exhibits blue luminescence with a quantum yield of 100 % in solution that is considerably red-shifted in the solid state. The photophysics and solid-state organization of the new species were compared with those of a related methyl congener, showing distinct differences that are assigned to the nature of the carbon-based substituent at the phosphorus center, which was also confirmed by DFT calculations, and the supramolecular organization in the solid state.

Luminescent N-aryl-heteroacene derivatives

The incorporation of heteroatoms into polycyclic aromatic hydrocarbons can alter their optical and electronic properties. Here, we report the synthesis and characterization of a series of N,N′-diaryl diazadioxatetrahydropentacenes (4a–e) as well as related N-phenyl azatrioxatetrahydropentacene and triazatetrahydrotetracene derivatives (5, 6) to investigate their photophysical properties and solid-state organization. These compounds were prepared from readily available compounds via a concise approach involving copper-catalyzed aryl amination, followed by nucleophilic aromatic substitution. The compounds display bright luminescence in solution and in the solid state and strong solvatochromism. Single-crystal X-ray diffraction of N,N′-aryl diazadioxatetrahydropentacenes (4b–d) revealed that all the compounds possessed nearly planar polycyclic aromatic systems with the pendant aryl groups nearly orthogonal to the pentacyclic core. Nonetheless, different substituents on the pendant aryl groups resulted in differences in photophysical properties because of differences in molecular geometries and solid-state packing. Interestingly, the N,N′-aryl diazadioxatetrahydropentacene bearing 2,6-dimethylphenyl groups attached to the nitrogen atoms (4d) gave two different polymorphs from the same solvent system, constituting a relatively rare example of concomitant polymorphism for such a rigid structure.

Understanding the p-doping of spiroOMeTAD by tris(pentafluorophenyl)borane

The solid-state organization of photoabsorber, hole and electron transporting layers, and interfaces between them plays an important role in governing the performance and stability of emerging optoelectronic devices such as perovskite solar cells (PSCs). The molecular organic semiconductor (OSC) 2,2′,7,7′-tetrakis [N,N-di(4-methoxyphenyl)amino]-9,9′-spirobifluorene (spiroOMeTAD) is a promising hole-transporting material (HTM) for PSCs, which is p-doped by molecular dopants to augment the charge carrier mobility. Here, the p-type doping of spiroOMeTAD by tris(pentafluorophenyl)borane (BCF) is investigated by a combination of techniques including optical spectroscopy, X-ray diffraction, Fourier transform infrared (FTIR), solid-state (ss)NMR, and electron paramagnetic resonance (EPR) spectroscopy. BCF molecules interact with traces of water molecules to form BCF-water complexes. Optical spectroscopy analysis suggests that the BCF/BCF-water complexes oxidize spiroOMeTAD molecules and facilitate p-type doping of spiroOMeTAD molecules. The different distributions of BCF and BCF-water molecules in doped spiroOMeTAD are characterized by FTIR and 11B NMR spectroscopy. An NMR crystallography approach which combines two-dimensional (2D) ssNMR and crystallography modeling is employed to unravel the packing interactions in spiroOMeTAD, and this analysis is extended to probe the morphological and structural changes in spiroOMeTAD:BCF blends. The hyperfine interactions are characterized by 2D hyperfine sub-level correlation (HYSCORE) spectroscopy. In this way, insight into the complex spiroOMeTAD:BCF blend morphology is obtained and compared for different dopant concentrations. Molecular-level analysis of doped HTMs enabled by this study has much wider relevance for further investigation, for example, chemical design and interfacial engineering of p-type doped HTMs for stable and efficient hybrid perovskite photovoltaics.

Combining heteronuclear correlation NMR with spin-diffusion to detect relayed Cl–H–H and N–H–H proximities in molecular solids

Analysis of short-to-intermediate range intermolecular interactions offers a great way of characterizing the solid-state organization of small molecules and materials. This can be achieved by two-dimensional (2D) homo- and heteronuclear correlation NMR spectroscopy, for example, by carrying out experiments at high magnetic fields in conjunction with fast magic-angle spinning (MAS) techniques. But, detecting 2D peaks for heteronuclear dipolar coupled spin pairs separated by greater than 3 Å is not always straightforward, particularly when low-gamma quadrupolar nuclei are involved. Here, we present a 2D correlation NMR experiment that combines the advantages of heteronuclear-multiple quantum coherence (HMQC) and proton-based spin-diffusion (SD) pulse sequences using radio-frequency-driven-recouping (RFDR) to probe inter and intramolecular 1H-X (X = 14N, 35Cl) interactions. This experiment can be used to acquire 2D 1H{X}-HMQC filtered 1H–1H correlation as well as 2D 1H-X HMQC spectra. Powder forms of dopamine·HCl and l-histidine·HCl·H2O are characterized at high fields (21.1 T and 18.8 T) with fast MAS (60 kHz) using the 2D HMQC-SD-RFDR approach. Solid-state NMR results are complemented with NMR crystallography analyses using the gauge-including projector augmented wave (GIPAW) approach. For histidine·HCl·H2O, 2D peaks associated with 14N–1H–1H and 35Cl–1H–1H distances of up to 4.4 and 3.9 Å have been detected. This is further corroborated by the observation of 2D peaks corresponding to 14N–1H–1H and 35Cl–1H–1H distances of up to 4.2 and 3.7 Å in dopamine·HCl, indicating the suitability of the HMQC-SD-RFDR experiments for detecting medium-range proximities in molecular solids.

Functionalized Crystalline N-Trimethyltriindoles: Counterintuitive Influence of Peripheral Substituents on Their Semiconducting Properties.

Three crystalline N-trimethyltriindoles endowed with different functionalities at 3, 8 and 13 positions (either unsubstituted or with three methoxy or three acetyl groups attached) are investigated, and clear correlations between the electronic nature of the substituents and their solid-state organization, electronic properties and semiconductor behavior are established. The three compounds give rise to similar columnar hexagonal crystalline structures; however, the insertion of electron-donor methoxy groups results in slightly shorter stacking distances when compared with the unsubstituted derivative, whereas the insertion of electron-withdrawing acetyl groups lowers the crystallinity of the system. Functionalization significantly affects hole mobilities with the triacetyl derivative showing the lowest mobility within the series in agreement with the lower degree of order. However, attaching three methoxy groups also results in lower hole mobility values in the OFETs (0.022 vs. 0.0014 cm2 V−1 s−1) in spite of the shorter stacking distances. This counterintuitive behavior has been explained with the help of DFT calculations performed to rationalize the interplay between the intramolecular and intermolecular properties, which point to lower transfer integrals in the trimethoxy derivative due to the HOMO wave function extension over the peripheral methoxy groups. The results of this study provide useful insights into how peripheral substituents influence the fundamental charge transport parameters of chemically modified triindole platforms of fundamental importance to design new derivatives with improved semiconducting performance.

Design and synthesis of benzothiadiazole-based molecular systems: self-assembly, optical and electronic properties

A comprehensive study was conducted to determine the effect of the donor-group on the solid-state organization and electronic properties of stimuli-responsive benzothiadiazole-based D–A–D building blocks.

Introducing Selenium in Single-Component Molecular Conductors Based on Nickel Bis(dithiolene) Complexes.

Two selenated analogues of the all-sulfur single-component molecular conductor [Ni(Et-thiazdt)2] (Et-thiazdt = N-ethylthiazoline-2-thione-4,5-dithiolate) have been prepared from their precursor radical-anion complexes. Replacement of the thione by a selenone moiety gives the neutral [Ni(Et-thiazSedt)2] complex. It adopts an unprecedented solid-state organization (for neutral nickel complexes), with the formation of perfectly eclipsed dimers and very short intermolecular Se···Se contacts (81% of the van der Waals contact distance). Limited interactions between dimers leads to a large semiconducting gap and low conductivity (σRT = 1.7 × 10-5 S cm-1). On the other hand, going from the neutral [Ni(Et-thiazdt)2] dithiolene complex to the corresponding [Ni(Et-thiazds)2] diselenolene complex gives rise to a more conventional layered structure built out of uniform stacks of the diselenolene complexes, different, however, from the all-sulfur analogue [Ni(Et-thiazdt)2]. Band structure calculations show an essentially 1D electronic structure with large band dispersion and a small HOMO-LUMO gap. Under high pressures (up to 19 GPa), the conductivity increases by 4 orders of magnitude and the activation energy is decreased from 120 meV to only 13 meV, with an abrupt change observed around 10 GPa, suggesting a structural phase transition under pressure.

5-Fluorocytosine/Isocytosine Monohydrate. The First Example of Isomorphic and Isostructural Co-Crystal of Pyrimidine Nucleobases

To date, despite the crucial role played by cytosine, uracil, and thymine in the DNA/RNA replication process, no examples showing isomorphic and isostructural behavior among binary co-crystals of natural or modified pyrimidine nucleobases have been so far reported in the literature. In view of the relevance of biochemical and pharmaceutical compounds such as pyrimidine nucleobases and their 5-fluoroderivatives, co-crystals of the molecular complex formed by 5-fluorocytosine and isocytosine monohydrate, C4H4FN3O·C4H5N3O·H2O, have been synthesized by a reaction between 5-fluorocytosine and isocytosine. They represent the first example of isomorphic and isostructural binary co-crystals of pyrimidine nucleobases, as X-ray diffraction analysis shows structural similarities in the solid-state organization of molecules with that of the (1:1) 5-fluorocytosine/5-fluoroisocytosine monohydrate molecular complex, which differs solely in the H/F substitution at the C5 position of isocytosine. Molecules of 5-fluorocytosine and isocytosine are present in the crystal as 1H and 3H-ketoamino tautomers, respectively. They form almost coplanar WC base pairs through nucleobase-to-nucleobase DAA/ADD hydrogen bonding interactions, demonstrating that complementary binding enables the crystallization of specific tautomers. Additional peripheral hydrogen bonds involving all available H atom donor and acceptor sites of the water molecule give a three-dimensional polymeric structure. In the absence of H⋯F hydrogen-bonding interactions, the robustness of the supramolecular architectures based on three-point recognition synthons is responsible for the existence of isostructurality between the two molecular complexes.

Insight into the structures and dynamics of organic semiconductors through solid-state NMR spectroscopy

Organic semiconductors (OSCs) are of fundamental and technological interest, owing to their properties and functions in a range of optoelectronic devices, including organic light-emitting diodes, organic photovoltaics and organic field-effect transistors, as well as emerging technologies, such as bioelectronic devices. The solid-state organization of the subunits in OSC materials, whether molecular or polymeric, determines the properties relevant to device performance. Nevertheless, the systematic relationships between composition, structure and processing conditions are rarely fully understood, owing to the complexity of the organic architectures and the resulting solid-state structures. Characterization over different length scales and timescales is essential, especially for semi-ordered or amorphous regions, for which solid-state NMR (ssNMR) spectroscopy yields nanoscale insight that can be correlated with scattering measurements and macroscopic property analyses. In this Review, we assess recent results, challenges and opportunities in the application of ssNMR to OSCs, highlighting its role in state-of-the-art materials design and characterization. We illustrate how insight is obtained on local order and composition, interfacial structures, dynamics, interactions and how this information can be used to establish structure–property relationships. Finally, we provide our perspective on applying ssNMR to the next generation of OSCs and the development of new ssNMR methods. The structure of organic semiconductor thin films influences their performance in optoelectronic devices. This Review highlights how solid-state NMR techniques can be used to investigate the structure, composition and dynamics of organic semiconductors and, thus, establish structure–property relationships.

Vibrational circular dichroism as a probe of solid-state organisation of derivatives of cyclic β-amino acids: Cis- and trans-2-aminocyclobutane-1-carboxylic acid.

Peptide models built from cis- and trans-2-aminocyclobutane-1-carboxylic acids (ACBCs) are studied in the solid phase by combining Fourier-transform infrared spectroscopy (FTIR) absorption spectroscopy, vibrational circular dichroism (VCD), and quantum chemical calculations using density functional theory (DFT). The studied systems are N-tert-butyloxycarbonyl (Boc) derivatives of 2-aminocyclobutanecarboxylic acid (ACBC) benzylamides, namely Boc-(cis-ACBC)-NH-Bn and Boc-(trans-ACBC)-NH-Bn. These two diastereomers show very different VCD signatures and intensities, which of the trans-ACBC derivative being one order of magnitude larger in the region of the ν (CO) stretch. The spectral signature of the cis-ACBC derivative is satisfactorily reproduced by that of the monomer extracted from the solid-state geometry of related ACBC derivatives, which shows that no long-range effects are implicated for this system. In terms of hydrogen bonds, the geometry of this monomer is intermediate between the C6 and C8 structures (exhibiting a 6- or 8-membered cyclic NH⋯O hydrogen bond) previously evidenced in the gas phase. The benzyl group must be in an extended geometry to reproduce satisfactorily the shape of the VCD spectrum in the ν (CO) range, which qualifies VCD as a potential probe of dispersion interaction. In contrast, reproducing the IR and VCD spectrum of the trans-ACBC derivative requires clusters larger than four units, exhibiting strong intermolecular H-bonding patterns. A qualitative agreement is obtained for a tetramer, although the intensity enhancement is not reproduced. These results underline the sensitivity of VCD to the long-range organisation in the crystal.

Tris(μ2-2-meth-oxy-6-{[(2-sulfido-eth-yl)imino]meth-yl}phenolato)trinickel(II) di-methyl-formamide monosolvate: crystal structure, spectroscopic characterization and anti-bacterial activity.

The title trinuclear nickel(II) complex, [Ni3(C10H11NO2S)3]·C3H7NO, with a Schiff base ligand formed in situ from 2-amino-ethane-thiol and o-vanillin crystallizes in the ortho-rhom-bic space group Pbca. Its asymmetric unit consists of one neutral Ni3 L 3 mol-ecule and one DMF solvent mol-ecule. The solid-state organization of the complex can be described as an insertion of the solvent mol-ecules within the crystallographically independent trinuclear NiII species. Several C-H⋯π edge-to-face inter-actions and π-π stacking inter-actions link the components in the crystal. A first example of a short inter-molecular C-H⋯Ni contact is found. Anti-bacterial in vitro screening revealed that the title compound has anti-bacterial activity, the best effect being against Acinetobacter baumannii.

Directing the Solid-State Organization of Racemates via Structural Mutation and Solution-State Assembly Processes.

Chirality plays a central role in biomolecular recognition and pharmacological activity of drugs and can even lead to new functions such as spin filters. Although there have been significant advances in understanding and controlling the helical organization of enantiopure synthetic molecular systems, rationally dictating the assembly of mixtures of enantiomer (including racemates) is nontrivial. Here we demonstrate that a subtle change in molecular structure coupled with the understanding of assembly processes of enantiomers and racemates, in both dilute solution and concentrated gels, acts as a stepping stone to rationally control the organization in the solid-state. We have studied trans-1,2-disubstituted cyclohexanes as model systems with carboxamide, thioamide, and their combination as functional groups. On comparing the gelation propensity of individual enantiomers and racemates, we find that racemates of carboxamide, thioamide, and their combination adopt self-sorting, coassembly, and mixed organization, respectively. Remarkably, these modes of assembly of racemates were also retained in solid-state. These results point out that studying the solution-phase assembly is a key link for connecting molecular structure with the assembly in the solid-state, even for racemates.

Direct Observation of the Relationship betweenMolecular Topology and Bulk Morphology for a π-Conjugated Material.

High-performance organic semiconducting materials are reliant upon subtle changes in structure across different length scales. These morphological features control relevant physical properties and ultimately device performance. By combining in situ NMR spectroscopy and theoretical calculations, the conjugated small molecule TT is shown to exhibit distinct temperature-dependent local structural features that are related to macroscopic properties. Specifically, lamellar and melt states are shown to exhibit different molecular topologies associated with planar and twisted conformations of TT, respectively. This topological transformation offers a novel avenue for molecular design and control of solid-state organization.

Hybrid and pristine polyalkylthiophene Langmuir-Schaefer films: Relationships of electrical impedance spectroscopy measurements, barrier properties and polymer nanostructure

Molecular organization in solid state plays a central role on organic devices performance. In this sense, a thorough investigation of thin films with application in organic electronics is imperative. This work addressed the fabrication and the morphological, optical and electrical characterization of Langmuir-Schaefer (LS) films of poly(3-hexylthiophene) (P3HT), pristine and mixed with stearic acid (SA), and their use as the active layer in organic Schottky diodes. The floating materials isotherms showed the SA molecules acting as a stabilizer for the P3HT in the Langmuir trough. Moreover, deposited P3HT:SA films present significant morphological changes, an improvement of the films overall structural ordering and a more effective charge transport within the active layer through electrical outcome. The alternating current measurements along with theoretical fitting, using equivalent electrical circuits, provided a good alternative to investigate the interfacial effects of the P3HT and P3HT:SA films deposited onto Al and Au electrodes.

Organic and Organometallic Fluorinated Materials for Electronics and Optoelectronics: A Survey on Recent Research

Conjugated organic polymers, small molecules, and transition metal organometallic complexes are used as active semiconducting materials in electronic and optoelectronic devices including organic solar cells (OSCs), organic field effect transistors (OFETS), organic light emitting diodes (OLEDs). While some of these technologies are mature and already available on the market, research is still very active in academic and industrial laboratories to gain better performances. Major drawbacks which still limit large industrial production of some of these devices are not only the non‐optimized performances, but also stability issues and cost. In fact, wide applicability of organic electronic technology largely relies on the development of efficient, durable and cost‐effective materials. Properties of molecular and polymeric semiconductors can be properly engineered and finely tuned by the design of the conjugated molecular structure and the selective introduction of various functional groups as substituents. Selective functionalization of the conjugated backbone with fluorine atoms and fluorinated substituents has been largely demonstrated to be an effective structural modification not only for tuning optoelectronic properties, but also to affect solid state organization and to improve stability. This review covers the most important classes of materials (conjugated polymers, small molecules, and organometallic complexes) reporting for each of these classes the applications in OSCs, OFETs, and OLEDs and highlighting the role of fluorine functionalization on the properties. The literature shows intriguing results that can be achieved by fluorine functionalization, and it also points out that this research field is still promising for future progress.

Cyclopentadithiophene-Benzothiadiazole Donor-Acceptor Polymers as Prototypical Semiconductors for High-Performance Field-Effect Transistors.

Donor-acceptor (D-A) conjugated polymers are of great interest as organic semiconductors, because they offer a rational tailoring of the electronic properties by modification of the donor and acceptor units. Nowadays, D-A polymers exhibit field-effect mobilities on the order of 10-2-100 cm2 V-1 s-1, while several examples showed a mobility over 10 cm2 V-1 s-1. The development of cyclopentadithiophene-benzothiadiazole (CDT-BTZ) copolymers one decade ago represents an important step toward high-performance organic semiconductors for field-effect transistors. The significant rise in field-effect mobility of CDT-BTZ in comparison to the existing D-A polymers at that time opened the door to a new research field with a large number of novel D-A systems. From this point, the device performance of CDT-BTZ was gradually improved by a systematic optimization of the synthesis and polymer structure as well as by an efficient solution processing into long-range ordered thin films. The key aspect was a comprehensive understanding of the relation between polymer structure and solid-state organization. Due to their fundamental role for the field of D-A polymers in general, this Account will for the first time explicitly focus on prototypical CDT-BTZ polymers, while other reviews provide an excellent general overview on D-A polymers. The first part of this Account discusses strategies for improving the charge carrier transport, focusing on chemical aspects. Improved synthesis as an essential stage toward high purity, and high molecular weight is a prerequisite for molecular order. The modification of substituents is a further crucial feature to tune the CDT-BTZ packing and self-assembly. Linear alkyl side chains facilitate intermolecular π-stacking interactions, while branched ones increase solubility and alter the polymer packing. Additional control over the supramolecular organization of CDT-BTZ polymers is introduced by alkenyl substituents via their cis-trans isomerization. The last discussed chemical concept is based on heteroatom variation within the CDT unit. The relationships found experimentally for CDT-BTZ between polymer chemical structure, solid-state organization, and charge carrier transport are explained by means of theoretical simulations. Besides the effects of molecular design, the second part of this Account discusses the processing conditions from solution. The film microstructure, defined as a mesoscopic domain organization, is critically affected by solution processing. Suitable processing techniques allow the formation of a long-range order and a uniaxial orientation of the CDT-BTZ chains, thus lowering the trapping density of grain boundaries for charge carriers. For instance, alignment of the CDT-BTZ polymer by dip-coating yields films with a pronounced structural and electrical anisotropy and favors a fast migration of charge carriers along the conjugated backbones in the deposition direction. By using film compression with the assistance of an ionic liquid, one even obtains CDT-BTZ films with a band-like transport and a transistor hole mobility of 10 cm2 V-1 s-1. This device performance is attributed to large domains in the compressed films being formed by CDT-BTZ with longer alkyl chains, which establish a fine balance between polymer interactions and growth kinetics during solvent evaporation. On the basis of the prototypical semiconductor CDT-BTZ, this Account provides general guidelines for achieving high-performance polymer transistors by taking into account the subtle balance of synthetic protocol, molecular design, and processing.

Interface engineering and solid-state organization for triindole-based p-type organic thin-film transistors.

Inspired by the excellent device performance of triindole-based semiconductors in electronic and optoelectronic devices, the relationship between the solid-state organization and the charge-transporting properties of an easily accessible series of triindole derivatives is reported herein. The vacuum-evaporated organic thin-film transistors (OTFTs) exhibited a non ideal behaviour with a double slope in the saturation curves. Moreover, the treatment of the gate insulator of the OTFT device with either a self-assembled monolayer (SAM) or a polymer controls the molecular growth and the film morphology of the semiconducting layer, as shown by X-ray diffraction (XRD) analyses, atomic force microscopy (AFM) and theoretical calculations. N-Trihexyltriindole exhibited the best device performance with hole mobilities up to 0.1 cm2 V-1 s-1 at the low VG range and up to 0.01 cm2 V-1 s-1 at high VG, as well as enhanced Ion/Ioff ratios of around 106. The results suggest that the non-ideal behaviour of the here studied OTFT devices could be related to the higher interfacial disorder in comparison to that in the bulk.

Solid-state organization of n-type carbazole-based semiconductors for organic thin-film transistors.

The development of new organic semiconductors has been mainly led by the search for new π-conjugated cores, but recently the use of flexible side chains is attracting more and more attention to control the molecular packing and order in the solid state to improve the charge-transporting properties. In this work, the charge transport properties of a series of tricyanovinyl-substituted carbazole-based materials with different alkyl chain lengths have been investigated and correlated with the respective intermolecular interactions and molecular packings via X-ray diffraction (XRD) studies.

Croconaines as molecular materials for organic electronics: synthesis, solid state structure and use in transistor devices

Indolenine-based croconaines are synthesized, their structure and solid state organization are investigated together with their electronic properties in thin-film transistors.