Solid-state Magic Angle Spinning Research Articles

Magic Angle Spinning Solid-State 13C Photochemically Induced Dynamic Nuclear Polarization by a Synthetic Donor-Chromophore-Acceptor System at 9.4 T.

Solid-state photochemically induced dynamic nuclear polarization (photo-CIDNP) is a nuclear magnetic resonance spectroscopy technique in which nuclear spin hyperpolarization is generated upon optical irradiation of an appropriate donor-acceptor system. Until now, solid-state photo-CIDNP at high magnetic fields has been observed only in photosynthetic reaction centers and flavoproteins. In the present work, we show that the effect is not limited to such biomolecular samples, and solid-state 13C photo-CIDNP can be observed at 9.4 T under magic angle spinning using a frozen solution of a synthetic molecular system dissolved in an organic solvent. Signal enhancements for the source molecule larger than a factor of 2300 are obtained. In addition, we show that bulk 13C hyperpolarization of the solvent can be generated via spontaneous 13C-13C spin diffusion at natural abundance.

Searching for Laves Phase Superstructures: Structural and 27Al NMR Spectroscopic Investigations in the Hf-V-Al System.

Laves phases exhibit a plethora of different structures and a multitude of physical properties. Investigations in the ternary system Hf-V-Al led to the discovery of numerous members of the solid solution Hf(V1-xAlx)2, which adopt the hexagonal MgZn2 type (C14) for medium to high amounts of Al (x = 0.2-1) and the cubic MgCu2 type (C15) for small Al amounts (x = 0.05-0.1). While all members exhibit Pauli-paramagnetic behavior due to the absence of localized magnetic moments, the V-rich cubic member Hf(V0.95Al0.05)2 additionally exhibits a superconducting state below TC = 7.6(1) K. All synthesized compounds were characterized by powder X-ray diffraction, and selected samples were furthermore investigated by 27Al solid-state magic-angle spinning (MAS) NMR. HfAl2 exhibits two Al resonances, one rather sharp and one significantly broadened signal, in line with the crystal structure and respective coordination environments. The members of the solid solution exhibit extremely broadened resonances due to the mixing of V and Al on the same crystallographic sites. For nominal Hf(V0.125Al0.875)2, however, two distinct sharp NMR signals were observed. This contrasts with the description of a solid solution. Therefore, single-crystal X-ray studies were conducted, showing that Hf(V0.125Al0.875)2 really is an ordered compound with the sum formula Hf4VAl7 (P3̅m1), which exhibits an, thus far, unknown superstructure of MgZn2.

DNP-assisted solid-state NMR enables detection of proteins at nanomolar concentrations in fully protonated cellular milieu.

With the sensitivity enhancements conferred by dynamic nuclear polarization (DNP), magic angle spinning (MAS) solid state NMR spectroscopy experiments can attain the necessary sensitivity to detect very low concentrations of proteins. This potentially enables structural investigations of proteins at their endogenous levels in their biological contexts where their native stoichiometries with potential interactors is maintained. Yet, even with DNP, experiments are still sensitivity limited. Moreover, when an isotopically-enriched target protein is present at physiological levels, which typically range from low micromolar to nanomolar concentrations, the isotope content from the natural abundance isotopes in the cellular milieu can outnumber the isotope content of the target protein. Using isotopically enriched yeast prion protein, Sup35NM, diluted into natural abundance yeast lysates, we optimized sample composition. We found that modest cryoprotectant concentrations and fully protonated environments support efficient DNP. We experimentally validated theoretical calculations of the limit of specificity for an isotopically enriched protein in natural abundance cellular milieu. We establish that, using pulse sequences that are selective for adjacent NMR-active nuclei, proteins can be specifically detected in cellular milieu at concentrations in the hundreds of nanomolar. Finally, we find that maintaining native stoichiometries of the protein of interest to the components of the cellular environment may be important for proteins that make specific interactions with cellular constituents.

Origin of Oxygen in Graphene Oxide Revealed by 17O and 18O Isotopic Labeling.

Wet-chemical oxidation of graphite in a mixture of sulfuric acid with a strong oxidizer, such as potassium permanganate, leads to the formation of graphene oxide with hydroxyl and epoxide groups as the major functional groups. Nevertheless, the reaction mechanism remains unclear and the source of oxygen is a subject of debate. It could theoretically originate from the oxidizer, water, or sulfuric acid. In this study, we employed 18O and 17O labeled reagents to experimentally elucidate the reaction mechanism and, thus, determine the origin of oxo-functional groups. Our findings reveal the multifaceted roles of sulfuric acid, acting as a dispersion medium, a dehydrating agent for potassium permanganate, and an intercalant. Additionally, it significantly acts as a source of oxygen next to manganese oxides. Through 17O solid-state magic-angle spinning (MAS) NMR experiments, we exclude water as a direct reaction partner during oxygenation. With labeling experiments, we conclude on mechanistic insights, which may be exploited for the synthesis of novel graphene derivatives.

Polymorph Identification for Flexible Molecules: Linear Regression Analysis of Experimental and Calculated Solution- and Solid-State NMR Data.

The Δδ regression approach of Blade et al. [ J. Phys. Chem. A 2020, 124(43), 8959-8977] for accurately discriminating between solid forms using a combination of experimental solution- and solid-state NMR data with density functional theory (DFT) calculation is here extended to molecules with multiple conformational degrees of freedom, using furosemide polymorphs as an exemplar. As before, the differences in measured 1H and 13C chemical shifts between solution-state NMR and solid-state magic-angle spinning (MAS) NMR (Δδexperimental) are compared to those determined by gauge-including projector augmented wave (GIPAW) calculations (Δδcalculated) by regression analysis and a t-test, allowing the correct furosemide polymorph to be precisely identified. Monte Carlo random sampling is used to calculate solution-state NMR chemical shifts, reducing computation times by avoiding the need to systematically sample the multidimensional conformational landscape that furosemide occupies in solution. The solvent conditions should be chosen to match the molecule's charge state between the solution and solid states. The Δδ regression approach indicates whether or not correlations between Δδexperimental and Δδcalculated are statistically significant; the approach is differently sensitive to the popular root mean squared error (RMSE) method, being shown to exhibit a much greater dynamic range. An alternative method for estimating solution-state NMR chemical shifts by approximating the measured solution-state dynamic 3D behavior with an ensemble of 54 furosemide crystal structures (polymorphs and cocrystals) from the Cambridge Structural Database (CSD) was also successful in this case, suggesting new avenues for this method that may overcome its current dependency on the prior determination of solution dynamic 3D structures.

High-efficiency low-power 13C-15N cross polarization in MAS NMR

Biomolecular solid-state magic angle spinning (MAS) NMR spectroscopy frequently relies on selective 13C-15N magnetization transfers, for various kinds of correlation experiments. Introduced in 1998, spectrally induced filtering in combination with cross polarization (SPECIFIC-CP) is a selective heteronuclear magnetization transfer experiment widely used for biological applications. At MAS frequencies below 20 kHz, commonly used for 13C-detected MAS NMR experiments, SPECIFIC-CP transfer between amide 15N and 13Cα atoms (NCA) is typically performed with radiofrequency (rf) fields set higher than the MAS frequency for both 13C and 15N channels, and high-power 1H decoupling rf field is simultaneously applied. Here, we experimentally explore a broad range of NCA zero-quantum (ZQ) SPECIFIC-CP matching conditions at the MAS frequency of 14 kHz and compare the best high- and low-power matching conditions with respect to selectivity, robustness, and sensitivity at lower 1H decoupling rf fields. We show that low-power NCA SPECIFIC-CP matching condition gives rise to 20% sensitivity enhancement compared to high-power conditions, in 2D NCA spectra of microcrystalline assemblies of HIV-1 CACTD-SP1 protein with inositol hexakis-phosphate (IP6).

The hidden depths of forest soil organic carbon chemistry in a pumice soil

Forest ecosystems can store massive amounts of organic carbon (OC) deep in their soils. Soil OC (SOC) is composed of several complex organic compounds of which groupings of these organic compounds can provide an insight into evaluating the formation and fate of SOC. However, there is little information available regarding the chemical composition of deep forest SOC and how they compare to upper soil depths. The objective of this study was to explore the SOC chemistry changes with increasing soil depth on a fine spatial scale in a planted forest soil derived from young volcanic erupted airfall deposits. Soil core samples to 1 m depth were collected from Puruki Experimental Forest (New Zealand) and examined for incremental depth changes in SOC functional groups, or chemical shift regions, using solid-state 13C cross polarisation magic angle spinning nuclear magnetic resonance (13C CPMAS-NMR) spectroscopy. The results showed that soil depth was a driver of change in soil chemical shift regions. The presence of a coarse-textured soil horizon, lapilli layer, at depth was a driver of significant (p < 0.05) differences between SOC functional groups. In the upper soil profile (0–10 cm), the chemical shift distribution was dominated by O-alkyl C (39%) followed by alkyl C (32%), aromatic C (23%), and carboxyl C (6%). In the deep soil layers, we found alkyl C increased below the lapilli layer (varying depth > 50 cm) compared to above the lapilli layer. In the deep soil layers the alkyl C was the dominant functional group (55%), followed by O-alkyl C (28%). Furthermore, there was a decrease at depth in aromatic (12%) and carboxyl C (5%). The A/O-A ratio increased with depth from soil above the lapilli layer compared to soils below the lapilli layer indicating a greater degree of organic matter decomposition and a corresponding decrease in the labile OC fractions. Within the lapilli layer the SOC functional groups and A/O-A ratio were highly variable. These results highlight that changes in SOC chemical composition occur with increasing soil depth, a property of deep soil that is frequently understudied, and are highly influenced by the multi layered nature of soil derived from volcanic airfall deposits.

Evidence for new fluoride coordination in SiO2-Al2O3-P2O5-CaO/SrO-CaF2 compositions used in ion-leachable ionomer-type cements: A 19F MAS-NMR investigation

Glass ionomer-type glasses are widely utilized in industrial and biomaterial applications due to their unique combination of biocompatibility, strong adhesive properties, and controlled ion release. The structural understanding of fluoride ions in these materials is critical for optimizing their performance and tailoring their properties to specific applications. In this study, we employ solid-state 19F magic-angle spinning nuclear magnetic resonance (MAS-NMR) spectroscopy as a powerful tool to investigate the fluoride coordination environments in glass-ionomer-type glasses. A series of strontium-substituted glasses in the system SiO2-Al2O3-P2O5-CaO/SrO-CaF2 were synthesised by the high-temperature melt-quench technique and analysed by 19F MAS-NMR spectroscopy. A previously unknown F coordination environment with Sr was discovered.

Alkaline Hydrothermal Treatment of Chabazite to Enhance Its Ammonium Removal and Recovery Capabilities through Recrystallization

The treatment of chabazite (CHA), a natural zeolite, with the alkaline hydrothermal method to improve its ion-exchange capacity is a widely adopted route by environmental scientists for the purpose of better ammonium (NH4+) removal from wastewater. This work addresses a noteworthy trend in environmental science, where researchers, impressed by the increased ion-exchange capacity achieved through alkaline hydrothermal treatment, often bypass the thorough material characterization of treated CHA. The prevalent misconception attributes the improved features solely to the parent zeolitic framework, neglecting the fact that corrosive treatments like this can induce significant alterations in the framework and those must be identified with correct nomenclature. In this work, alkaline-mediated hydrothermally treated CHA has been characterized through X-ray powder diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), solid-state magic-angle spinning nuclear magnetic resonance (MAS-NMR), high-resolution transmission electron microscopy (HRTEM), and energy-dispersive X-ray spectroscopy (EDS) and it is concluded that the treated samples have been transformed into a desilicated, aluminum (Al)-dense framework of analcime (ANA) with a low silica–alumina ratio and with a strikingly different crystal shape than that of parent CHA. This treated sample is further examined for its NH4+ removal capacity from synthetic wastewater in a fixed-bed column arrangement. It achieved a maximum NH4+ removal efficiency of 4.19 meq/g (75.6 mg/g of NH4+), twice that of the parent CHA. Moreover, the regeneration of the exhausted column yielded a regenerant solution, with 94% reclaimed NH4+ in it, which could be used independently as a nitrogenous fertilizer. In this work, the meticulous compositional study of zeolitic materials, a well-established practice in the field of material science, is advocated for adoption by environmental chemists. By embracing this approach, environmental scientists can enhance their comprehension of the intricate changes induced by corrosive treatments, thereby contributing to a more nuanced understanding of zeolitic behavior in environmental contexts.

Probing the Effect of Environments on the Stability of Ni2P Nanoparticle Electrocatalysts

Ni2P has been shown to be an effective catalyst for the hydrogen evolution reaction (HER), making it a promising replacement for Pt which is the current state of the art HER catalyst.1,2 H2 is a clean-energy critical fuel and chemical highlighted by the US Department of Energy’s “Hydrogen Shot,” which seeks to reduce “the cost of carbon-neutral hydrogen by 80% to $1 per 1 kg in 1 decade, highlighting the key role of hydrogen in implementing carbon-neutral solutions.”3 Ni2P is also a good or promising catalyst for other reactions, such as alcohol oxidation, hydrodesulfurization,4,5 nitrate reduction, and oxygen evolution reaction.6 However, Ni2P and other TMPs are susceptible to oxidation, which can lead to catalyst degradation and loss in certain conditions.7,8 Stability is an important part of catalysis, especially for achieving the goals of the Hydrogen Shot. Therefore, it is important to understand complex degradation mechanisms in order to better understand structure-activity relationships in these materials. In the present work, in situ Ni K-edge X-ray absorption spectroscopy (XAS) and ex situ P Kα and Kβ X-ray emission spectroscopy (XES) couple together to understand the degradation of Ni2P and show the effects of electrolyte pH, ligands, and air on Ni2P nanoparticles.5 nm Ni2P nanoparticles were synthesized by heating NiCl2 and tris(diethylamino)phosphine in oleylamine. The nanoparticles were drop cast onto carbon fiber paper electrodes and Si wafers or Au-coated wafers for P Kα and Kβ XES. Oleylamine ligands are removed by thermal annealing. Electrochemical experiments were conducted with a three-electrode cell using carbon fiber paper or Au-coated wafers deposited with Ni2P nanoparticles as working electrode, Ag/AgCl calibrated to the H2 redox couple as reference electrode, and graphite rod as counter electrode. P Kα and Kβ XES experiments were conducted inside a N2 glovebox to prevent unintentional air oxidation. Transmission-mode Ni K-edge XAS was conducted on a benchtop spectrometer.Upon exposure to air, as-synthesized Ni2P nanoparticles were studied via P Kα and Kβ XES. Results showed that the phosphide species converted to phosphate with analysis of intermediates well fit by a simple two-phase mixture. Phosphide:phosphate ratios were quantified using linear combination analysis, providing a powerful tool to analyze P speciation on various samples in an inert environment and with minimal loss of material, both advantages of this system over 31P magic angle spinning solid state nuclear magnetic resonance spectroscopy and X-ray photoelectron spectroscopy. Continued work looks at analyzing the effects of the ligand environment on the stability of nanoparticles in electrolytes spanning from acidic to basic pH. We hypothesize that ligands will significantly stabilize the nanoparticles against corrosion and that without ligands Ni2P readily converts to a nickel phosphate species upon exposure to electrolyte.References(1) Popczun, E. J.; McKone, J. R.; Read, C. G.; Biacchi, A. J.; Wiltrout, A. M.; Lewis, N. S.; Schaak, R. E. Nanostructured Nickel Phosphide as an Electrocatalyst for the Hydrogen Evolution Reaction. J. Am. Chem. Soc. 2013, 135 (25), 9267–9270. https://doi.org/10.1021/ja403440e.(2) Liu, P.; Rodriguez, J. A. Catalysts for Hydrogen Evolution from the [NiFe] Hydrogenase to the Ni2P(001) Surface: The Importance of Ensemble Effect. J. Am. Chem. Soc. 2005, 127 (42), 14871–14878. https://doi.org/10.1021/ja0540019.(3) Bullock, M.; More, K. Basic Energy Sciences Roundtable: Foundational Science for Carbon-Neutral Hydrogen Technologies (Report); DOESC Office of Basic Energy Sciences, 2022. https://doi.org/10.2172/1834317.(4) Layan Savithra, G. H.; Muthuswamy, E.; Bowker, R. H.; Carrillo, B. A.; Bussell, M. E.; Brock, S. L. Rational Design of Nickel Phosphide Hydrodesulfurization Catalysts: Controlling Particle Size and Preventing Sintering. Chem. Mater. 2013, 25 (6), 825–833. https://doi.org/10.1021/cm302680j.(5) Rodriguez, J. A.; Kim, J.-Y.; Hanson, J. C.; Sawhill, S. J.; Bussell, M. E. Physical and Chemical Properties of MoP, Ni2P, and MoNiP Hydrodesulfurization Catalysts: Time-Resolved X-Ray Diffraction, Density Functional, and Hydrodesulfurization Activity Studies. J. Phys. Chem. B 2003, 107 (26), 6276–6285. https://doi.org/10.1021/jp022639q.(6) Menezes, P. W.; Indra, A.; Das, C.; Walter, C.; Göbel, C.; Gutkin, V.; Schmeiβer, D.; Driess, M. Uncovering the Nature of Active Species of Nickel Phosphide Catalysts in High-Performance Electrochemical Overall Water Splitting. ACS Catal. 2017, 7 (1), 103–109. https://doi.org/10.1021/acscatal.6b02666.(7) Ha, D.-H.; Han, B.; Risch, M.; Giordano, L.; Yao, K. P. C.; Karayaylali, P.; Shao-Horn, Y. Activity and Stability of Cobalt Phosphides for Hydrogen Evolution upon Water Splitting. Nano Energy 2016, 29, 37–45. https://doi.org/10.1016/j.nanoen.2016.04.034.(8) Parra-Puerto, A.; Ng, K. L.; Fahy, K.; Goode, A. E.; Ryan, M. P.; Kucernak, A. Supported Transition Metal Phosphides: Activity Survey for HER, ORR, OER, and Corrosion Resistance in Acid and Alkaline Electrolytes. ACS Catal. 2019, 11515–11529. https://doi.org/10.1021/acscatal.9b03359.

Unveiling the structure of calcium borate glass by neutron diffraction, MAS-NMR, Raman and first-principles calculations

Calcium borate glass is a challenging system, due to the rich variety of borate units and alterable boron coordination number, and hence they are also of particular interest for academic study. In this study, neutron diffraction, solid-state magic angle spinning nuclear magnetic resonance (MAS-NMR) and Raman spectroscopy were combined with first-principles calculations, experience potential structure refinement (EPSR) simulations to investigate the structure of xCaO·(1-x)11B2O3 glass. Property data such as density and glass transition temperature were also measured to study the impact of structural changes on the properties of glasses. The structure of calcium borate glass was analyzed using various methods including structural unit, atomic pair bond length, coordination number, ring structure, chain structure and cavity distribution. Most notably, the atomic labeling method plays a key role in the structural analysis process. Through this method some new conclusions were obtained. For example, the increase of CaO content mainly leads to the conversion of BO to NBO in the glass structure, and has little effect on the content of BO3 and BØ4-. This result further leads to an increase in Ca-NBO interactions. Interestingly, the bond length distribution of Ca-NBO and B-NBO is shorter than that of Ca-BO and B-BO, so the glass structure becomes denser. The structural reason why the density of calcium borate glass is less than the crystal density was also revealed. This study contributes to unveiling the structure of calcium borate glass and exploring the correlation between the structure and properties of calcium borate glass, which provides a valuable reference for developing more valuable amorphous materials.

Surface Passivation by Embedment of Polyphosphate Inhibits the Aragonite-to-Calcite Thermodynamic Pump.

We monitored the conversion of aragonite to calcite in water by comparing single and mixed polymorph suspensions. We demonstrate that the enhanced aragonite-to-calcite conversion in mixed polymorph suspensions is dramatically inhibited by adding polyphosphate (sodium hexametaphosphate). 13C and 31P solid-state magic angle spinning (MAS) NMR and attenuated total reflectance Fourier transform infrared (ATR-FTIR) spectra allow us to follow quantitatively these effects as imparted by the dissolution-recrystallization processes. 31P{13C} and 13C{31P} rotational echo double resonance (REDOR)NMR experiments reveal coprecipitated phosphate that is embedded only within the surfaces of both polymorphs during the initial dissolution and recrystallization processes, causing passivation that arrests phase conversion.

Effect of borate, fluoride and strontium ions on biomimetic nucleation of calcium phosphate studied using solid-state nuclear magnetic resonance and X-ray diffraction

ObjectivesApatite minerals can have various anions and cations in their crystal structure in addition to phosphate ion (PO₄³⁻) and calcium ion (Ca2+). The aim of this study is to investigate effects of the borate, fluoride and strontium ions on biomimetic nucleation of calcium phosphate. MethodsNano-crystalline hydroxyapatite (H-Ap) was obtained from a supersaturated buffered solution containing 4.12 mM HPO42- and 5.88 mM Ca2+ (H-Ap). Four additives were used in solid solution methods: (i) 0.588 mM F- (F-Ap), (ii) 5.88 mM Sr2+ (Sr-Ap), (iii) 4.12 mM BO33- (BO3-Ap), and (iv) a surface pre-reacted glass ionomer (S-PRG) filler eluate that contained 0.17 mM Sr2+, 0.588 mM F-, 11.1 mM BO33-- (SPRG-Ap). Apatite crystallization was investigated using a solid-state magic-angle spinning NMR spectroscopy and X-ray diffraction (XRD) with the Rietveld analysis. ResultsA 2D 1H–31P heteronuclear-correlation NMR showed F- ion incorporation in the apatite structure of the F-Ap and SPRG-Ap. The peaks on the 31P axis of the F-Ap, Sr-Ap, and BO3-Ap were different from that of the H-Ap, and the full width at half maximum increased in the following order: H-Ap∼F-Ap∼BO3-Ap< SPRG-Ap< Sr-Ap, suggesting the incorporation of the F-, Sr2+ and BO33-. The incorporation of F and BO3 was further confirmed by 19F and 11B NMR. The XRD revealed that Sr2+ was preferentially incorporated into the CaII site. SignificanceThe F-, Sr2+ and BO33-ions might be involved in modifying the crystallization of apatite precipitation, producing a variety of apatite. S-PRG filler that release these ions may have an effect on remineralization, i.e., the reformation of apatite lost due to caries.

Polarization Amplification in Dynamic Nuclear Polarization Magic-Angle Spinning Solid-State Nuclear Magnetic Resonance by Solubilizing Traditional Ionic Salts.

Dynamic nuclear polarization can improve the sensitivity of magic-angle spinning solid-state NMR experiments by 1-2 orders of magnitude. In aqueous media, experiments are usually performed using the so-called DNP juice, a glycerol-d8/D2O/H2O mixture (60/30/10, v/v/v) that can form a homogeneous glass at cryogenic temperatures. This acts as a cryoprotectant and prevents phase separation of the paramagnetic polarizing agents (PAs) that are added to the mixture to provide the source of electron spin polarization required for DNP. Here, we show that relatively high 1H DNP enhancements (∼60) can also be obtained in water without glycerol (or other glass forming agents) simply by dissolving high concentrations of electrolytes (such as NaCl or LiCl), which perturb the otherwise unavoidable ice crystallization observed upon cooling, thereby reducing PA phase separation and restoring DNP efficiency.

Insights into Glyphosate Adsorption in Aqueous Solutions Using Zn-Al Layered Double Oxide

AbstractContamination of surface and groundwater with glyphosate, used widely on crops to control weeds, can cause severe environmental damage. Processes for glyphosate removal from water bodies have been developed, but few are effective and all are expensive. This objective of the present study was to investigate the use of a layered double oxide as a potentially effective and inexpensive material to remove glyphosate from water. Equilibrium, kinetics, and adsorption mechanisms were evaluated, in addition to the effects of competing anions and temperature on glyphosate adsorption. Up to 95% of glyphosate was removed from a synthetic solution in 50 min by Zn2Al-LDO (layered double oxide in Zn/Al ratio of 2:1) at pH 10. The adsorption isotherms were type L and the Langmuir model best fitted the experimental data, with a qmax value of 191.96 μg mg–1 at 25°C. The XRD pattern did not support the hypothesis of intercalation of glyphosate anions, whereas Fourier-transform infrared and solid-state 13C and 31P magic angle spinning nuclear magnetic resonance confirmed the adsorption of glyphosate anions on the Zn2Al-LDO surface, through carboxylate and phosphonate moiety interactions with end-on and side-on modes. The degree of removal of glyphosate increased with increasing temperature and decreased with increasing concentration of competing anions, with carbonate anions having the most prominent effect on the inhibition of glyphosate adsorption. The adsorption kinetics fitted a pseudo-first order law. Moreover, the intraparticle diffusion model suggested that the adsorption process depends on the formation and thickness of the film at the solution/solid interface.

A new route of production of the meso-porous chitosan with well-organized honeycomb surface microstructure from shrimp waste without destroying the original structure of native shells: Extraction, modification and characterization study

The highly active bio-polysaccharide based compound namely chitin and chitosan have been extracted from shrimp shell which usually expelled out extensively from food processing industries and considered as waste materials. However, by conducting demineralization, de-proteinization and deacetylation on it which could be a new route of production of valuable meso-porous chitosan that possesses a noteworthy well-organized honeycomb like surface microstructure which undoubtedly capable to form sustainable bio-composites. Whereas the honeycomb like microstructures showed a well-defined pore canals (Pc) and pore canal tubes (Pct) onto their surface. The samples were characterized via ATR-FTIR spectroscopy, High resolution SEM, AFM, EDX, XRD and 13C solid-state Cross-Polarization Magic Angle Spinning (CPMAS) NMR. The molecular weight(M‾v) of isolated chitin and chitosan were determined by viscosity and the values were 1.06 × 106(DPv = 5228), 1.8 × 104(DPv = 116) respectively besides degree of deacetylation (DDA) were measured by ATR-FTIR spectroscopy, CPMAS NMR, pH-metric titration and the values were 24&21 for chitin and 84&82 for chitosan. The results suggest that the shrimp shell waste is an attractive source of well-organized honeycomb like meso-porous chitin and chitosan with regular surface microstructures which might have a significant/potential application into the sustainable bio-composite formulation due to various industrial and biomedical sector indeed.

BCN materials with adjustable active sites as heterogeneous acid–base catalysts for Knoevenagel condensation reaction

The Knoevenagel condensation reaction is one of the most effective methods for the formation of C–C bonds. However, developing efficient heterogeneous catalysts for the Knoevenagel condensation reaction is imperative. In this study, a series of boron carbon nitride (BCN) catalysts with adjustable active sites were designed via molecular self-assembly and calcination-temperature adjustment. The BCN materials synthesized at a calcination temperature of 750 °C (BCN-750) had the largest number of active sites and exhibited excellent activity, with a yield of 96% in the condensation reaction of benzaldehyde and malononitrile in only 4 min at room temperature. The excellent catalytic activity was attributed to the B and N species at the B–N–C sites, which functioned as acids and bases, respectively, to catalyze the Knoevenagel condensation reaction. This result was confirmed by temperature-programmed desorption of CO2 (CO2 TPD), temperature-programmed desorption of NH3 (NH3 TPD), X-ray photoelectron spectroscopy (XPS), and 11B solid-state magic-angle spinning nuclear magnetic resonance spectroscopy. In addition, aromatic and aliphatic aldehydes were successfully converted into their corresponding products. Analysis of the catalytic mechanism revealed that the deprotonation of malononitrile to form a carbanion was the rate-determining step.

Serial Polarization Transfer by Combination of Cross-Relaxation and Rotational Resonance for Sensitivity-Enhanced Solid-State NMR.

Methods which induce site-specificity and sensitivity enhancement in solid-state magic-angle spinning NMR spectroscopy become more important for structural biology due to the increasing size of molecules under investigation. Recently, several strategies have been developed to increase site specificity and thus reduce signal overlap. Under dynamic nuclear polarization (DNP) for NMR signal enhancement, it is possible to use cross-relaxation transfer induced by select dynamic groups within the molecules which is exploited by SCREAM-DNP (Specific Cross Relaxation Enhancement by Active Motions under DNP). Here, we present an approach where we additionally reintroduce the homonuclear dipolar coupling with rotational resonance (R2) during SCREAM-DNP to further boost the selectivity of the experiment. Detailed analysis of the polarization buildup dynamics of 13C-methyl polarization source and 13C-carbonyl target in 2-13C-ethyl 1-13C-acetate provides information about the sought-after and spurious transfer pathways. We show that dipolar-recoupled transfer rates greatly exceed the DNP buildup dynamics in our model system, indicating that significantly larger distances can be selectively and efficiently hyperpolarized.

Deep insight into reactive chemical structures of Class F fly ash

Reactive amorphous aluminum silicates dominate the reactivity of fly ash in alkali cement; however, the quantitative characterization of valid chemical compositions and structures information is highly challenging due to the heterogeneity and complexity of these phases. To acquire this information, in this work, Class F fly ash was treated with 1% hydrofluoric acid, followed by step-by-step analysis using a scanning electron microscope with an energy dispersive spectrometer (SEM-EDS), solid-state magic angle spinning nuclear magnetic resonance (MAS-NMR), and Fourier transform infrared (FT-IR) spectroscopy. Based on the acidolysis method, along with SEM-EDS statistical analysis, four amorphous aluminum silicate phases with relatively higher reactivity were successfully separated and quantitatively showcased, along with their respective average atomic percentage compositions (i.e., Si, Al, Ca, Fe, Na, K, and Mg%). In addition, the use of MAS-NMR and FT-IR analyses allowed for further quantitative insight into the reactive chemical structures and their associations with reactivity. The proposed characterization techniques have unique advantages for acquiring detailed reactive amorphous chemistries, which are difficult to obtain using conventional analysis procedures in alkali systems.

NMR spectroscopy-based analysis of gallstones of cancerous and benign gallbladders from different geographical regions of the Indian subcontinent.

Analysis of the chemical composition of gallstones is vital for the etiopathogenesis of gallstone diseases that can ultimately help in the prevention of its formation. In the present study, gallstones from seven different regions of India were analyzed to highlight the major difference in their composition. Also, gallstones of different pathological conditions i.e., benign (chronic cholecystitis, CC) and malignant gallbladder disease (gallbladder cancer GBC) were characterized. The type of polymorphs of cholesterol molecules was also studied to provide insight into the structure of gallstones. 1H solution state NMR spectroscopy 1D experiments were performed on a total of 94 gallstone (GS) samples collected from seven different geographical regions of India. Solid-State NMR spectroscopy 13C cross-polarization magic angle spinning (CPMAS) experiments were done on the 20 CC GS samples and 20 GBC GS samples of two regions. 1H NMR spectra from the solution state NMR of all the stones reveal that cholesterol was a major component of the maximum stones of the north India region while in south Indian regions, GS had very less cholesterol. 13C CPMAS experiments reveal that the quantity of cholesterol was significantly more in the GS of CC in the Lucknow region compared with GBC stones of Lucknow and Chandigarh. Our study also revealed that GS of the Lucknow region of both malignant and benign gallbladder diseases belong to the monohydrate crystalline form of cholesterol while GS of Chandigarh region of both malignant and benign gallbladder diseases exists in both monohydrate crystalline form with the amorphous type and anhydrous form. Gallstones have a complicated and poorly understood etiology. Therefore, it is important to understand the composition of gallstones, which can be found in various forms and clinical conditions. Variations in dietary practices, environmental conditions, and genetic factors may influence and contribute to the formation of GS. Prevention of gallstone formation may help in decreasing the cases of gallbladder cancer.