Solid-state Lithium Metal Batteries Research Articles

Amino-modified UiO-66-NH2 reinforced polyurethane based polymer electrolytes for high-voltage solid-state lithium metal batteries

Amino-modified UiO-66-NH2 reinforced polyurethane based polymer electrolytes for high-voltage solid-state lithium metal batteries

Organic montmorillonite modified polyethylene oxide based polymer electrolyte for dendrite-free flexible solid-state lithium metal batteries

Polyethylene oxide (PEO) based solid-state electrolytes are known for the low manufacturing cost and excellent processability, but their practical application is paved with thorns including the inferior ionic conductivity, low Li+ transfer number and insufficient Li dendrite blocking ability. Herein, we propose organic montmorillonite (OMMT) with expanded layer spacing (1.97 nm) as versatile fillers to construct PEO-OMMT electrolyte, in which OMMT not only increases Li+ transfer number (0.56) and ionic conductivity (7.15 × 10−4 S cm−1), providing fast ionic transport channels, but also endows PEO with high mechanical strength, resulting remarkable Li dendrite blocking ability (>2100 h). Additionally, the high dielectric constant and Lewis-rich polar sites of OMMT facilitate the dissociation of lithium salts and the rapid formation of LiF and Li3N-rich solid electrolyte interface layers. Impressively, the LiFePO4|PEO-OMMT|Li cell shows a high initial capacity (154.4 mAh g−1 at 0.5C) with ultralong cycling lifespan (>1200 cycles). Similarly, the LiNi0.83Mn0.05Co0.12O2|PEO-OMMT|Li cell retains a high discharge capacity of 151.5 mAh g−1 after 100 cycles at 0.2C. This work highlights the indelible contributions of OMMT functionalized fillers in improving the interfacial stability of PEO based solid-state electrolytes, paving a feasible avenue for the practical application of solid-state lithium metal batteries.

High-Voltage Single-Ion Covalent Organic Framework Electrolytes Enabled by Nitrile Migration Ladders for Lithium Metal Batteries.

The poor electrochemical stability window and low ionic conductivity in solid-state electrolytes hinder the development of safe, high-voltage, and energy-dense lithium metal batteries. Herein, taking advantage of the unique electronic effect of nitrile groups, we designed a novel azanide-based single-ion covalent organic framework (CN-iCOF) structure that possesses effective Li+ transport and high-voltage stability in lithium metal batteries. Density functional theory (DFT) calculations and molecular dynamics (MD) revealed that electron-withdrawing nitrile groups not only resulted in an ultralow HOMO energy orbital but also enhanced Li+ dissociation through charge delocalization, leading to a high tLi+ of 0.93 and remarkable oxidative stability up to 5.6 V (vs. Li+/Li) simultaneously. Moreover, cyanation leveraging Strecker reaction transformed reversible imine-linkage to a stable sp3-carbon-containing azanide anion, which facilitated contorted alignment of transport "ladders" along the one-dimensional anionic channels and the ionic conductivity could reach 1.33×10-5 S cm-1 at ambient temperature without any additives. As a result, CN-iCOF allowed operation of solid-state lithium metal batteries with high-voltage cathodes such as LiNi0.8Mn0.1Co0.1O2 (NCM811), demonstrating stable lithium deposition up to 1,100 h and reversible battery cycling at ambient temperature up to 4.5 V, shedding light on the importance of discovering new functionality for forthcoming high-performance batteries.

Rationally designed poly(propylene carbonate)-based electrolyte for dendrite-free all solid-state lithium metal batteries

Solid polymer electrolytes (SPEs)-based lithium metal batteries (LMBs) perform tremendous potential due to their high energy density and increased safety in comparison to conventional lithium-ion batteries. However, narrow electrochemical stability window (ESW), poor mechanical properties and confining current densities of traditional polyethylene oxide (PEO)-based electrolytes limit their ability to be compatible with high-energy density cathode materials. To tackle these challenges, a novel scalable SPE is hence designed for LMBs. This SPE is primarily composed of an allyl glycidyl ether modified poly(propylene carbonate) (PPCAGE) produced through metal-free polymerization method, an electrospun sulfonated poly(fluorenyl ether ketone) (SPFEK) framework and LiTFSI, which shows good mechanical property (tensile strength = 6.70 MPa and modulus of elasticity (MOE) = 82.5 MPa), high ionic conductivity (2.62 × 10−4 S cm−1 at 60 °C) and wide ESW (5.1 V). The all-solid-state batteries (ASSBs) are assembled with three different cathode materials including LFP, NCM811, and LCO to evaluate the application prospects of this SPE. The Li/LFP ASSB demonstrates a capacity of 101 mAh g−1 at 1 C, maintaining 78 % capacity retention after 500 loops. Even in the Li/LCO cell with a high cut off voltage of 4.5 V, the ASSB still achieves 132 mAh g−1 at 0.5 C, with 91 % capacity retention after 500 cycles. This SPFEK-PPCAGE/LiTFSI based electrolyte has promising application in energy-dense ASSBs.

The electron-withdrawing properties of butanesultone-based polymer electrolytes facilitate stable operation at 4.6 V for solid-state lithium batteries with NCM811 cathodes

Polymer electrolyte (PEs) based solid-state lithium metal batteries (SSLMBs) featuring LiNi0.8Co0.1Mn0.1O2 (NCM811) cathodes offer high energy density and safety. However, their development is hampered by the poor anti-oxidation ability and severe interfacial reactions between the PEs and NCM811 cathode. Herein, the butanesultone-based polymer electrolytes (PBS-PEs) were synthesized via ring-opening polymerization, with different terminal groups tailored to optimize anti-oxidation ability and interface compatibility. The electron-withdrawing properties of sulfonate groups readily complex with nickel atoms, enhancing the anti-oxidation resistance of the PEs. Furthermore, PBS-PEs containing terminal –OCH3 and trifluoromethanesulfonate groups, exhibit superior electrochemical performance compared to those with terminal -OH groups. These variants offer a wide electrochemical stability window of 5.1 V (vs. Li+/Li) and ionic conductivity reaching up to 1.25 × 10−3 S cm−1 at 25 °C. The improved interfacial compatibility with NCM811 cathodes exhibiting a good capacity retention of 80 % after 150 cycles at a current density of 2 C when charged to 4.6 V. Thus, this study not only introduces a novel electron-withdrawing sulfonate groups PEs for pairing with high-voltage cathodes, but also advances the application of NCM811 cathode material in high-energy SSLMBs.

Reactive strontium nitride Additive: Constructing ion/electronic conductive paths for garnet-based solid-state lithium metal batteries

Solid-state lithium metal batteries (SSLMBs) using the garnet electrolyte Li6.4La3Zr1.4Ta0.6O12 (LLZTO) offer high safety and energy density compared to liquid organic electrolyte lithium-ion batteries. However, the interfacial electrochemical stabilization of Li metal anode with LLZTO leads to problems such as high interfacial resistance and Li dendrite growth, which hinders the wide application of SSLMBs. In this work, a multifunctional Li-Sr-N composite anode by mixing molten Li with Sr3N2 is constructed, in which the reactive wetting of in situ-formed Li3N achieves intimate interfacial contact, and the ionic/electronic conductive paths created by Li-Sr alloys and Li3N effectively homogenise Li deposition and suppress Li dendrites. The interfacial resistance is reduced to 40.42 Ω cm2, and the symmetric cell is stably cycled for 5500 h and 600 h at current densities of 0.1mA cm−2 and 0.4 mA cm−2, respectively, and the full cell of Li-Sr-N|LLZTO|LiFePO4 could be stably cycled for 200 cycles at 0.5C. The preparation of composite anodes using Sr3N2 as an additive may be a new strategy for producing of garnet-based SSLMBs with outstanding energy density and safety performance.

Hydrogen-Bonded Organic Frameworks-based Electrolytes with Controllable Hydrogen Bonding Networks for Solid-State Lithium Batteries.

The lack of stable solid-state electrolytes (SSEs) with high-ionic conductivity and the rational design of electrode/electrolyte interfaces remains challenging for solid-state lithium batteries. Here, for the first time, a high-performance solid-state lithium-oxygen (Li-O2) battery is developed based on the Li-ion-conducted hydrogen-bonded organic framework (LHOF) electrolyte and the HOF-DAT@CNT composite cathode. Benefiting from the abundant dynamic hydrogen bonding network in the backbone of LHOF-DAT SSEs, fast Li+ ion transport (2.2×10-4 S cm-1), a high Li+ transference number (0.88), and a wide electrochemical window of 5.05 V are achieved. Symmetric batteries constructed with LHOF-DAT SSEs exhibit a stably cycled duration of over 1400 h with uniform deposition, which mainly stems from the jumping sites that promote a uniformly high rate of Li+ flux and the hydrogen-bonding network structure that can relieve the structural changes during Li+ transport. LHOF-DAT SSEs-based Li-O2 batteries exhibit high specific capacity (10335 mAh g-1), and stable cycling life up to 150 cycles. Moreover, the solid-state lithium metal battery with LHOF-DAT SSEs endow good rate capability (129.6 mAh g-1 at 0.5 C), long-term discharge/charge stability (210 cycles). The design of LHOF-DAT SSEs opens an avenue for the development of novel SSEs-based solid-state lithium batteries.

"Peapod-like" Fiber Network: A Universal Strategy for Composite Solid Electrolytes to Inhibit Lithium Dendrite Growth in Solid-State Lithium Metal Batteries.

Solid-state lithium metal batteries (SSLMBs) are a promising energy storage technology, but challenges persist including electrolyte thickness and lithium (Li) dendrite puncture. A novel three-dimensional "peapod-like" composite solid electrolyte (CSEs) with low thickness (26.8 μm), high mechanical strength, and dendrite inhibition was designed. Incorporating Li7La3Zr2O12 (LLZO) enhances both mechanical strength and ionic conductivity, stabilizing the CSE/Li interface and enabling Li symmetric batteries to stabilize for 3000 h. With structural advantages, the assembled LFP||Li and NCM811||Li cells exhibit excellent cycling performance. In addition, the constructed NCM811 pouch cell achieves a high gravimetric/volumetric energy density of 307.0 Wh kg-1/677.7 Wh L-1, which can light up LEDs under extreme conditions, demonstrating practicality and high safety. This work offers a generalized strategy for CSE design and insights into high-performance SSLMBs.

Solid composite electrolyte with a Cs doped fluorapatite-interfacial layer enabling dendrite-free anodes for solid-state lithium batteries

Composite electrolytes have garnered considerable attention owing to ease of processing, flexibility, and cost-effectiveness. Nevertheless, their practical applicability has been hindered by the insufficient ionic conductivity and the formation of dendrites duo to solid–solid interfacial interactions. In this work, an interfacial layer with Cs-doped fluorapatite (Ca5(PO4)3F, FA) as the filler was constructed to enhance the flame-retardant property of the composite electrolyte and inhibit dendrite growth during cycling process. The CSE with the Cs doped FA interfacial layer exhibits significant flame-retardant properties. Furthermore, the self-healing electrostatic shielding (SHES) mechanism of Cs+ effectively inhibits the growth of lithium dendrite and promotes uniform lithium deposition. The solid electrolyte integrated with the Cs doped FA interfacial layer exhibits a broad voltage window of 5.58 V vs. Li+/Li, high ionic conductivity of 5.43 × 10-4 S cm−1, and Li+ transference number of 0.716. Density functional theory (DFT) calculations reveal a competitive interaction between Cs+ and Li+ for TFSI- coordination, leading to reduced binding energy of LiTFSI and thus increasing the availability of free lithium ions, enhancing lithium ions mobility. Additionally, the symmetrical cell with the Cs doped FA interfacial layer demonstrates cyclic stability over 2000 h at 0.2 mA cm−2 due to the lower nucleation overpotential, demonstrating excellent lithium plating/stripping capabilities. The LFP||Li full cell shows a remarkable capacity retention of 99.54 % after 300 cycles at 0.5C, and 95.58 % with a higher Coulombic efficiency (CE) of 99 % after 600 cycles at 1C. In addition, the cell with this CSE and NCM811 cathode exhibits excellent capacity retention of 78 % after 150 cycles at 0.5C. This approach to designing interfacial layers offers new avenues for advancing solid-state lithium-metal batteries.

Unlocking 4.9 V Quasi-Solid-State Lithium Metal Battery via Solvent Screening and Interfacial Manipulation.

Parlous structure integrity of the cathode and erratic interfacial microdynamics under high potential take responsibility for the degradation of solid-state lithium metal batteries (LMBs). Here, high-voltage LMBs have been operated by modulating the polymer electrolyte intrinsic structure through an intermediate dielectric constant solvent and further inducing the gradient solid-state electrolyte interphase. Benefiting from the chemical adsorption between trimethyl phosphate (TMP) and the cathode, the gradient interphase rich in LiPFxOy and LiF is induced, thereby ensuring the structural integrity and interface compatibility of the commercial LiNi0.8Co0.1Mn0.1O2 (NCM811) cathode even at the 4.9 V cutoff voltage. Eventually, the specific capacity of NCM811|Li full cell based on TMP-modulated polymer electrolyte increased by 27.7% from 4.5 to 4.9 V. Such a universal screening method of electrolyte solvents and its derived electrode interfacial manipulation strategy opens fresh avenues for quasi-solid-state LMBs with high specific energy.

Electric field induced molecular orientation to construct the composite polymer electrolytes with vertically aligned ion diffusion pathways for stable solid-state lithium metal batteries

Fabricating flexible composite polymer electrolytes (CPEs) with vertically aligned ion transport pathways is necessary for the application of solid-state lithium metal batteries (LMBs), yet the orientation of polymer matrix usually is disorder, thus the improvement in ionic conductivity is unsatisfied. Herein, we develop a simple electric field induced molecular orientation strategy to fabricate the flexible CPEs with vertically aligned ion transport pathways. Driven by direct current (DC) electric field (e.g. 1.5 MV m−1), the polar 15C5-Li+ dipoles and monomer molecules are oriented regularly and cured to form flexible three dimension (3D) cross-linked structure. As a result, numerous vertically-aligned ion transport pathways have been generated in the vertically oriented arrangement CPEs, thus presenting highly enhanced ionic conductivities, mechanical strength and superb inhibition ability to lithium dendrite growth. When used as CPEs for Li||LiFePO4 (LFP) batteries, the vertically oriented CPEs exhibit excellent rate and long-term cycle stability with a reversible discharge capability of 124.9 mAh g−1 after 350 cycles at 1C and 60 °C. However, the randomly oriented CPEs deliver much poor cycle and rate performance at the same conduction. It can also be compatible with NCM811|Li batteries at 30 °C. Therefore, our simple DC electric field induced molecular orientation strategy holds a great application promise to construct the fast ion transport channels for the all-solid-state LMBs.

A Dual-Bond Crosslinking Strategy Enabling Resilient and Recyclable Electrolyte Elastomers for Solid-State Lithium Metal Batteries.

Elastomeric solid polymer electrolytes (SPEs) are highly promising to address the solid-solid-interface issues of solid-state lithium metal batteries (LMBs), but compromises have to be made to balance the intrinsic trade-offs among their conductive, resilient and recyclable properties. Here, we propose a dual-bond crosslinking strategy for SPEs to realize simultaneously high ionic conductivity, elastic resilience and recyclability. An elastomeric SPE is therefore designed with hemiaminal dynamic covalent networks and Li+-dissociation co-polymer chains, where the -C-N- bond maintains the load-bearing covalent network under stress but is chemically reversible through a non-spontaneous reaction, the weaker intramolecular hydrogen bond is mechanically reversible, and the soft chains endow the rapid ion conduction. With this delicate structure, the optimized SPE elastomer achieves high elastic resilience without loading-unloading hysteresis, outstanding ionic conductivity of 0.2 mS cm-1 (25 °C) and chemical recyclability. Then, exceptional room-temperature performances are obtained for repeated Li plating/stripping tests, and stable cycling of LMBs with either LiFePO4 or 4.3 V-class LiFe0.2Mn0.8PO4 cathode. Furthermore, the recycled and reprocessed SPEs can be circularly reused in LMBs without significant performance degradation. Our findings provide an inspiring design principle for SPEs to address the solid-solid-interface and sustainability challenges of solid-state LMBs.

Ternary stabilization strategies for succinonitrile-based in situ polymerized electrolyte enabling high-performance solid lithium metal batteries

Solid-state lithium metal batteries with high energy density and safety have gained increasing attention due to their potential applications. However, the practical use of solid electrolytes is hindered by several challenges. These include poor compatibility at the electrode–electrolyte interface, low ionic conductivity at room temperature, and fast capacity degradation. To address these issues, here we propose ternary strategies by in-situ cross-linked plastic crystal electrolyte (in-situ PCE) based on succinonitrile (SN). Through the in-situ polymerization of SN with polyacrylonitrile/poly(vinylidene difluoride) (PAN/PVDF) nanofibers separator, excellent mechanical strength and compatibility at the electrode–electrolyte interface are achieved. The cross-linked structure of thermally polymerized ethoxylated trimethylolpropane triacrylate (ETPTA) immobilizes the SN molecule, preventing its contact with the lithium metal and inhibiting irreversible side reactions. Additionally, a LiF-rich passivation layer is employed to further protect the SN at the electrolyte-lithium metal interface. The dual protection from ETPTA and LiF offers excellent stability to lithium. Hence, the in-situ PCE exhibits high ionic conductivity (0.79 mS cm−1 at 30 °C) and wide electrochemical window (4.56 V, vs Li+/Li). The cells exhibit excellent cycling stability and high-rate performance. LiFePO4//Li cells retain 96.6 % capacity after 1000 cycles at 10C rate. This study provides valuable insights into the development of high-performance solid-state electrolytes.

Earth-Abundant Kaolinite Nanoplatelet Gel Electrolytes for Solid-State Lithium Metal Batteries.

Lithium-ion batteries are the leading energy storage technology for portable electronics and vehicle electrification. However, demands for enhanced energy density, safety, and scalability necessitate solid-state alternatives to traditional liquid electrolytes. Moreover, the rapidly increasing utilization of lithium-ion batteries further requires that next-generation electrolytes are derived from earth-abundant raw materials in order to minimize supply chain and environmental concerns. Toward these ends, clay-based nanocomposite electrolytes hold significant promise since they utilize earth-abundant materials that possess superlative mechanical, thermal, and electrochemical stability, which suggests their compatibility with energy-dense lithium metal anodes. Despite these advantages, nanocomposite electrolytes rarely employ kaolinite, the most abundant variety of clay, due to strong interlayer interactions that have historically precluded efficient exfoliation of kaolinite. Overcoming this limitation, here we demonstrate a scalable liquid-phase exfoliation process that produces kaolinite nanoplatelets (KNPs) with high gravimetric surface area, thus enabling the formation of mechanically robust nanocomposites. In particular, KNPs are combined with a succinonitrile (SN) liquid electrolyte to form a nanocomposite gel electrolyte with high room-temperature ionic conductivity (1 mS cm-1), stiff storage modulus (>10 MPa), wide electrochemical stability window (4.5 V vs Li/Li+), and excellent thermal stability (>100 °C). The resulting KNP-SN nanocomposite gel electrolyte is shown to be suitable for high-rate rechargeable lithium metal batteries that employ high-voltage LiNi0.8Co0.15Al0.05O2 (NCA) cathodes. While the primary focus here is on solid-state batteries, our strategy for kaolinite liquid-phase exfoliation can serve as a scalable manufacturing platform for a wide variety of other kaolinite-based nanocomposite applications.

Design of Ultrathin Asymmetric Composite Electrolytes for Interfacial Stable Solid-State Lithium-Metal Batteries.

Ultrathin composite electrolytes hold great promise for high energy density solid-state lithium metal batteries (SSLMBs). However, finding an electrolyte that can simultaneously balance the interfacial stability of the lithium anode and high-voltage cathode is challenging. The present study utilized the both-side tape casting technique to fabricate ultrathin asymmetric composite electrolytes reinforced with polyimide (PI) fiber membrane, with a thickness of 26.8 μm. The implementation of this asymmetric structural design enables SSLMBs to attain favorable interfacial characteristics, such as exceptional resistance to lithium dendrite puncture and compatibility with high voltages. The suppression of lithium dendrite growth and the extension of the cycle life of lithium symmetric batteries by 4000 h are both experimental and theoretically demonstrated under the dual confinement of PI fiber membrane and Li7La3Zr2O12 ceramic fibers. Furthermore, the integration of multicomponent solid electrolyte interphase and cathode electrolyte interface interfacial layers into the lithium anode and high-voltage cathode enhance theirs cycling stability. With a gravimetric/volumetric energy density of 333.1 Wh kg-1/713.2 Wh L-1, the assembled LiNi0.8Co0.1Mn0.1O2 pouch cell demonstrates exceptional safety. The extensive application of this design concept to SSLMBs enables the resolution of electrode/electrolyte interface issues.

An electron-blocking interface for garnet-based quasi-solid-state lithium-metal batteries to improve lifespan

Garnet oxide is one of the most promising solid electrolytes for solid-state lithium metal batteries. However, the traditional interface modification layers cannot completely block electron migrating from the current collector to the interior of the solid-state electrolyte, which promotes the penetration of lithium dendrites. In this work, a highly electron-blocking interlayer composed of potassium fluoride (KF) is deposited on garnet oxide Li6.4La3Zr1.4Ta0.6O12 (LLZTO). After reacting with melted lithium metal, KF in-situ transforms to KF/LiF interlayer, which can block the electron leakage and inhibit lithium dendrite growth. The Li symmetric cells using the interlayer show a long cycle life of ~3000 hours at 0.2 mA cm−2 and over 350 hours at 0.5 mA cm−2 respectively. Moreover, an ionic liquid of LiTFSI in C4mim-TFSI is screened to wet the LLZTO|LiNi0.8Co0.1Mn0.1O2 (NCM) positive electrode interfaces. The Li|KF-LLZTO | NCM cells present a specific capacity of 109.3 mAh g−1, long lifespan of 3500 cycles and capacity retention of 72.5% at 25 °C and 2 C (380 mA g−1) with an average coulombic efficiency of 99.99%. This work provides a simple and integrated strategy on high-performance quasi-solid-state lithium metal batteries.

Realization of Enhanced Interfacial Lithium-Ion Transfer in Composite Polymer Electrolytes via Grafting Oligo-PEG Molecular Brushes on Silica-Coated Nanofibers for All-Solid-State Lithium Metal Batteries.

Polyether-based polymer electrolytes are attractive but still challenging for high-energy-density solid-state lithium metal batteries due to their limited Li-ion conductivity at room temperature. Herein, an oligomeric polyethylene glycol methyl ether methacrylate (PEGMEM)-modified silica-coated polyimide fibrous scaffold (PINF@PEGMEM-SiO2) was introduced in polyethylene glycol dimethyl ether (PEGDME) to enhance the Li-ion transportation at room temperature. PINF@PEGMEM-SiO2 was developed to build a continuous and interconnected interface for continuous Li-ion transportation in bulk. The carbonyl groups (C═O) of PEGMEM on SiO2 can promote the dissociation of lithium salts and enhance the migration of free Li ions at the interface. The same -C-C-O- unit contained in both PEGMEM and PEGDME ensures the compatibility of PEGMEM at the interface and PEGDME in the bulk. The prepared PEGDME-based polymer electrolyte exhibits a high ionic conductivity of 1.14 × 10-4 S cm-1 at 25 °C and an improved Li-ion transference number of 0.41. Furthermore, LiFePO4/Li and LiNi0.8Co0.1Mn0.1O2/Li cells with excellent cyclability and rate capability at ambient temperature are obtained.

In situ synthesis of cross-linking gel polymer electrolyte for lithium metal batteries

The room temperature ionic conductivity of polyethylene oxide (PEO)-based polymer electrolytes is low, the electrochemical window is narrow, and the mechanical strength is relatively poor. In this work, a cross-linking gel-based solid composite polymer electrolyte (CG-SCPE) was synthesized by introducing electrochemically stable carbonate-based functional groups. The synthesized CG-SCPE presents excellent tensile strength (26 MPa) and a wide electrochemical stability window (> 4.5 V vs. Li/Li+). Meanwhile, the in situ polymerization method induced by thermal heating resulted in good compatibility between electrodes/electrolytes. In addition, the assembled LiNi0.5Co0.2Mn0.3O2/CG-SCPE/Li battery exhibited satisfactory electrochemical performance. Therefore, the gel polymer electrolyte CG-SCPE with cross-linking network provides the possibility for future application of safe and high-performance solid-state lithium metal batteries. The results indicate that the introduction of cross-linking framework can simultaneously improve the mechanical strength, thermal stability, and electrochemical performance of solid polymer electrolyte.

Localized high concentration polymer electrolyte enabling room temperature solid-state lithium metal batteries with stable LiF-rich interphases

Polyvinylidene fluoride hexafluoropropylene (PVDF-HFP) based polymer electrolyte shows mechanical flexibility, soft and intimidate physical contact and good electrochemical stability, however, low ionic conductivity at room temperature and unstable interphases against Li metal hinder its application. In this article, we propose a universal strategy to prepare localized high concentration polymer electrolytes (LHCPE) in which high concentration lithium salt (LiTFSI) dissolved in tiny residual solvent (DMF) and the PVDF-HFP serves as solid dilution. The LHCPE regulates the solvation structure of lithium ions with anions instead of DMF solvent, allowing more anions to coordinate with Li+ and forming amount contact ion pairs (CIPs) and aggregates (AGGs). As a result, high ionic conductivity (5.9 × 10−4 S cm−1) and low activation energy (0.10 eV) achieved. The LHCPE also induces the decomposition of anions-derived LiF-rich interphases, that is ionic conducive and mechanical robust, thereby greatly improving the charge transfer kinetics and stability towards Li metal anodes. Consequently, at 0.5 mA cm−2 and 0.25 mAh cm−2, stable and long-term cycling over 2000 h obtained under room temperature in Li//Li symmetric cells achieved. The full solid-state LFP//LHCPE//Li cells further exhibit excellent capacity retention of 82.83 % even after 1200 cycles at room temperature and a high rate of 8 C (1C=170 mA·g−1). Our work shed light on the design of high-performance polymer-based composite electrolytes by manipulating the Li solvation structure.

Mechanisms of the Accelerated Li+ Conduction in MOF-Based Solid-State Polymer Electrolytes for All-Solid-State Lithium Metal Batteries.

Solid polymer electrolytes (SPEs) for lithium metal batteries have garnered considerable interests owing to their low cost, flexibility, lightweight, and favorable interfacial compatibility with battery electrodes. Their soft mechanical nature compared to solid inorganic electrolytes give them a large advantage to be used in low pressure solid-state lithium metal batteries, which can avoid the cost and weight of the pressure cages. However, the application of SPEs is hindered by their relatively low ionic conductivity. In addressing this limitation, enormous efforts are devoted to the experimental investigation and theoretical calculations/simulation of new polymer classes. Recently, metal-organic frameworks (MOFs) have been shown to be effective in enhancing ion transport in SPEs. However, the mechanisms in enhancing Li+ conductivity have rarely been systematically and comprehensively analyzed. Therefore, this review provides an in-depth summary of the mechanisms of MOF-enhanced Li+ transport in MOF-based solid polymer electrolytes (MSPEs) in terms of polymer, MOF, MOF/polymer interface, and solid electrolyte interface aspects, respectively. Moreover, the understanding of Li+ conduction mechanisms through employing advanced characterization tools, theoretical calculations, and simulations are also reviewed in this review. Finally, the main challenges in developing MSPEs are deeply analyzed and the corresponding future research directions are also proposed.