Interactions In Solid State Research Articles

Conformational stabilisation of a 2-pyridyl imide by n→π* interaction in solid state

ABSTRACT In recent studies, n→π* interactions featuring nucleophilic pyridine have been investigated using Fourier transform microwave spectroscopy and high-level theoretical computations. Examples of n→π* of this type in the solid state, however, are limited. The norbornene-based 2-pyridyl imide 1 is a compound that can adopt two conformers, in which the pyridyl nitrogen is either syn or anti to the norbornane bridge. It would be expected that the syn conformation of imide 1 would be more favourable, as indicated in a previous computational study. Here, tandem crystallographic and additional computational studies provide evidence that the otherwise unfavourable anti conformer of imide 1 becomes favoured upon stabilisation by an n→π* interaction in the solid state.

(Invited) An Unsymmetrical 5,15-Disubstituted Tetrabenzoporphyrin: Effect of Molecular Symmetry on the Packing Structure and Charge Transporting Property

One of the key issues in the development of organic field-effect transistor (OFET) materials is the improvement of charge mobility. Since charge mobility depends on intermolecular interactions in solid state, it is important to control the crystal structure. In the current mainstream OFET materials, such as acenes and heteroacenes, which have one-dimensionally (1D) extended polycyclic aromatic frameworks, the effect of substitution on the crystal structure has been intensively studied. On the other hand, some bulky (trialkylsilyl)ethynyl-substituted derivatives such as 6,13-bis(triisopropylsilylethynyl)pentacene (TIPS-pentacene) have been known to afford brickwork packing. In comparison, two-dimensionally (2D) extended π-conjugated molecules tend to form a sandwich herringbone, a co-facial herringbone, and a 1D columnar structure, due to their enhanced π−π interaction. The molecular design strategy to control the crystal structure of two-dimensional (2D) π-extended organic semi-conductors has not been intensively explored.We synthesized an unsymmetric tetrabenzoporphyrin derivative (TIPS-Ph-BP) to demonstrate the effect of molecular symmetry on crystal packing.1 An unsymmetric structure would make 2D π-stacking more stable than a one-dimensional (1D) columnar structure to counteract steric and electronic imbalance in the crystal. TIPS-Ph-BP formed an antiparallel slipped π-stacking and 2D herringbone-like structure as expected, but, it formed a dimeric herringbone packing consisting of slipped π-stacking in an antiparallel manner in the crystal. OFETs using TIPS-Ph-BP achieved the maximum hole mobility of 0.71 cm2 V-1 s-1 due to the partially 2D packing structure.Although TIPS-Ph-BP gave dimeric herringbone packing, this strategy could be used to control the crystal structures of various 2D extended π-conjugated systems. Further modification of the porphyrin substituents is ongoing. Reference K. Miyazaki, K. Matsuo, H. Hayashi, M. Yamauchi, N. Aratani, H. Yamada, Org. Lett. 2023, 25, 7354-7358

Orchestrated Octuple C-H Activation: A Bottom-Up Topology Engineering Approach toward Stimuli-Responsive Double-Heptagon-Embedded Wavy Polycyclic Heteroaromatics.

Curiosity-driven innovations on the design and synthesis of nonplanar polycyclic aromatic/heteroaromatic compounds with new molecular topologies unfold exciting opportunities for harnessing their intriguing supramolecular properties and thereby the development of novel functional organic materials. This work presents such an innovative synthetic concept of a bottom-up molecular topology engineering through a unique orchestrated octuple C-H activation reaction, toward the rapid synthesis of a novel class of double heptagon-incorporated nitrogen-doped laterally-fused polycyclic compounds with rarely reported wavy structural configuration. The profound impact of the molecular wavy structures of these compounds on their properties is manifested by weak and tunable solid-state intermolecular interactions controlling the electronic properties of the materials, leading to reversibly switchable fluorochromism in the solid state and thin films with mechanical force and solvent vapors as external stimuli, thereby indicating their potential applicability in rewritable fluorescent optical recording media, security papers, mechanosensors, volatile organic compound (VOC) sensors etc.

Macrocycle-Based Charge Transfer Cocrystals with Dynamically Reversible Chiral Self-Sorting Display Chain Length-Selective Vapochromism to Alkyl Ketones.

Chirality-driven self-sorting plays an essential role in controlling the biofunction of biosystems, such as the chiral double-helix structure of DNA from self-recognition by hydrogen bonding. However, achieving precise control over the chiral self-sorted structures and their functional properties for the bioinspired supramolecular systems still remains a challenge, not to mention realizing dynamically reversible regulation. Herein, we report an unprecedented saucer[4]arene-based charge transfer (CT) cocrystal system with dynamically reversible chiral self-sorting synergistically induced by chiral triangular macrocycle and organic vapors. It displays efficient chain length-selective vapochromism toward alkyl ketones due to precise modulation of optical properties by vapor-induced diverse structural transformations. Experimental and theoretical studies reveal that the unique vapochromic behavior is mainly attributed to the formation of homo- or heterochiral self-sorted assemblies with different alkyl ketone guests, which differ dramatically in solid-state superstructures and CT interactions, thus influencing their optical properties. This work highlights the essential role of chiral self-sorting in controlling the functional properties of synthetic supramolecular systems, and the rarely seen controllable chiral self-sorting at the solid-vapor interface deepens the understanding of efficient vapochromic sensors.

Optical probing of ultrafast laser-induced solid-to-overdense-plasma transitions

Understanding the solid target dynamics resulting from the interaction with an ultrashort laser pulse is a challenging fundamental multi-physics problem involving atomic and solid-state physics, plasma physics, and laser physics. Knowledge of the initial interplay of the underlying processes is essential to many applications ranging from low-power laser regimes like laser-induced ablation to high-power laser regimes like laser-driven ion acceleration. Accessing the properties of the so-called pre-plasma formed as the laser pulse’s rising edge ionizes the target is complicated from the theoretical and experimental point of view, and many aspects of this laser-induced transition from solid to overdense plasma over picosecond timescales are still open questions. On the one hand, laser-driven ion acceleration requires precise control of the pre-plasma because the efficiency of the acceleration process crucially depends on the target properties at the arrival of the relativistic intensity peak of the pulse. On the other hand, efficient laser ablation requires, for example, preventing the so-called “plasma shielding”. By capturing the dynamics of the initial stage of the interaction, we report on a detailed visualization of the pre-plasma formation and evolution. Nanometer-thin diamond-like carbon foils are shown to transition from solid to plasma during the laser rising edge with intensities < 1016 W/cm². Single-shot near-infrared probe transmission measurements evidence sub-picosecond dynamics of an expanding plasma with densities above 1023 cm−3 (about 100 times the critical plasma density). The complementarity of a solid-state interaction model and kinetic plasma description provides deep insight into the interplay of initial ionization, collisions, and expansion.

Mononuclear and binuclear dioxidomolybdenum(VI) chelates derived from a tridentate ONO donor aroylhydrazone: Spectral, structural, DFT and in silico biological investigations

Four dioxidomolybdenum(VI) complexes, [MoO2(L)]2·H2O (1), [MoO2(L)(py)] (2), [MoO2(L)(3-pic)]·H2O (3) and [MoO2(L)(4-pic)] (4) of a dibasic tridentate ONO donor aroylhydrazone, H2L (where H2L = 3-methoxy-2-hydroxybenzaldehyde-2-furoic acid hydrazone) have been synthesized and well characterized. The stoichiometric reaction of aroylhydrazone with MoO2(acac)2 in methanolic medium yielded phenoxobridged binuclear complex 1 whereas monomeric complexes, 2, 3 and 4 were formed as a result of incorporating different monodentate heterocyclic bases. The tridentate aroylhydrazone coordinates to the MoO22+ core through phenolate oxygen, azomethine nitrogen and iminolate oxygen atoms. Single crystal XRD studies established the coordination geometry of mononuclear dioxidomolybdenum(VI) complexes as distorted octahedron. The crystal structures and various solid state interactions were also investigated here. DFT investigations were conducted to explore the reactivity parameters of the studied aroylhydrazone and complexes. Furthermore, molecular docking analyses unveiled the superior putative binding energy of the investigated compounds in contrast to cisplatin. These findings were particularly pronounced in relation to the selected target proteins, which are indicative of their potential efficacy against lung and breast cancer cell lines.

Investigation of the Solid-State Interactions in Lyophilized Human G-CSF Using Hydrogen-Deuterium Exchange Mass Spectrometry.

Hydrogen/deuterium exchange mass spectrometry (HDX-MS) previously elucidated the interactions between excipients and proteins for liquid granulocyte colony stimulating factor (G-CSF) formulations, confirming predictions made using computational structure docking. More recently, solid-state HDX mass spectrometry (ssHDX-MS) was developed for proteins in the lyophilized state. Deuterium uptake in ssHDX-MS has been shown for various proteins, including monoclonal antibodies, to be highly correlated with storage stability, as measured by protein aggregation and chemical degradation. As G-CSF is known to lose activity through aggregation upon lyophilization, we applied the ssHDX-MS method with peptide mapping to four different lyophilized formulations of G-CSF to compare the impact of three excipients on local structure and exchange dynamics. HDX at 22 °C was confirmed to correlate well with the monomer content remaining after lyophilization and storage at -20 °C, with sucrose providing the greatest protection, and then phenylalanine, mannitol, and no excipient leading to progressively less protection. Storage at 45 °C led to little difference in final monomer content among the formulations, and so there was no discernible relationship with total deuterium uptake on ssHDX. Incubation at 45 °C may have led to a structural conformation and/or aggregation mechanism no longer probed by HDX at 22 °C. Such a conformational change was observed previously at 37 °C for liquid-formulated G-CSF using NMR. Peptide mapping revealed that tolerance to lyophilization and -20 °C storage was linked to increased stability in the small helix, loop AB, helix C, and loop CD. LC-MS HDX and NMR had previously linked loop AB and loop CD to the formation of a native-like state (N*) prior to aggregation in liquid formulations, suggesting a similar structural basis for G-CSF aggregation in the liquid and solid states.

Methods for the synthesis of barium titanate as a component of functional dielectric ceramics

Objectives. To examine the general principles and recent advances in the synthesis of high-purity and high-homogeneity barium titanate powders in the manufacture of electronic components.Results. The main publications regarding the synthesis of barium titanate powder, including the works of recent years, were analyzed. The technological advantages and disadvantages of various synthesis methods were identified. Groups of methods based on solid-state interaction of reagents and methods of “wet chemistry” were also considered. The possibilities of producing barium titanate particles of non-isometric shapes for creating textured ceramics were discussed separately.Conclusions. Barium titanate is a well-known ferroelectric with a high dielectric constant and low dielectric loss. It is used as a component in ceramic electronic products, for example, capacitors, memory devices, optoelectronic devices, and piezoelectric transducers. The possibilities of producing functional ceramics based on barium titanate powder largely depend on its state and morphological characteristics, determined during the synthesis stage. The most important factors affecting the functional characteristics of ceramics are the purity and morphology of the powder raw materials used.

Hydrogen bonding in glassy trehalose-water system: Insights from density functional theory and molecular dynamics simulations.

We report a detailed density functional theory and molecular dynamics study of hydrogen bonding between trehalose and water, with a special emphasis on interactions in the amorphous solid state. For comparison, water-water interactions in water dimers and tetramers are evaluated using quantum calculations. The results show that the hydrogen bonding energy is dependent not only on the geometry (bond length and angle) but also on the local environment of the hydrogen bond. This is seen in quantum calculations of complexes in vacuum as well as in amorphous solid states with periodic boundary conditions. The temperature-induced glass transition in the trehalose-water system was studied using molecular dynamics simulations with varying cooling and heating rates. The obtained parameters of the glass transition are in good agreement with the experiments. Moreover, the dehydration of trehalose in the glassy state was investigated through a gradual dehydration with multiple small steps under isothermal conditions. From these simulations, the values of water sorption energy at different temperatures were obtained. The partial molar enthalpy of mixing of water value of -18 kJ/mol found in calorimetric experiments was accurately reproduced in these simulations. These findings are discussed in light of the hydrogen bonding data in the system. We conclude that the observed exothermic effect is due to different responses of liquid and glassy matrices to perturbations associated with the addition or removal of water molecules.

Formulation and characterization of glipizide solid dosage form with enhanced solubility.

Glipizide, a poor water-soluble drug belongs to BCS class II. The proposed work aimed to enhance the solubility of glipizide by preparing solid dispersions, using polyvinyl pyrrolidone (PVP) and polyethylene glycol (PEG). Solvent evaporation method was used for the preparation of glipizide solid dispersions. Solid dispersions were prepared in four different drug-to-polymer ratios i.e. 1:1, 1:2, 1:3 and 1:4. Mainly effect of three polymers (PVP K30, PVP K90 and PEG 6000) was evaluated on the solubility and dissolution of glipizide. The in-vitro dissolution of all prepared formulations was performed under pH 6.8 at 37°C using USP type II apparatus. In-vitro dissolution results revealed that the formulations having high concentrations of the polymer showed enhanced solubility. Enhancements in the solubility and rate of dissolution of the drug were noted in solid dispersion formulations compared to the physical blends and pure drug. Solid dispersions containing polyvinyl pyrrolidone exhibited a more favorable pattern of drug release compared to the corresponding solid dispersions with PEG. An increase in the maximum solubility of the drug within the solid dispersion systems was observed in all instances. Two solid dispersion formulations were optimized and formulated into immediate-release tablets, which passed all the pharmacopoeial and non-pharmacopoeial tests. Fourier transformed Infrared (FTIR) spectroscopy X-ray diffraction (XRD) and Differential scanning calorimetry (DSC) were used to indicate drug: polymer interactions in solid state. Analysis of the solid dispersion samples through characterization tests indicated the compatibility between the drug and the polymer.

Liquid Madelung energy accounts for the huge potential shift in electrochemical systems

Achievement of carbon neutrality requires the development of electrochemical technologies suitable for practical energy storage and conversion. In any electrochemical system, electrode potential is the central variable that regulates the driving force of redox reactions. However, quantitative understanding of the electrolyte dependence has been limited to the classic Debye-Hückel theory that approximates the Coulombic interactions in the electrolyte under the dilute limit conditions. Therefore, accurate expression of electrode potential for practical electrochemical systems has been a holy grail of electrochemistry research for over a century. Here we show that the ‘liquid Madelung potential’ based on the conventional explicit treatment of solid-state Coulombic interactions enables quantitatively accurate expression of the electrode potential, with the Madelung shift obtained from molecular dynamics reproducing a hitherto-unexplained huge experimental shift for the lithium metal electrode. Thus, a long-awaited method for the description of the electrode potential in any electrochemical system is now available.

The role of a small molecular dipole moment for efficient non-doped deep blue thermally activated delayed fluorescence emitters

Non-doped and solution-processable deep blue emitters can greatly reduce the manufacturing cost of organic light-emitting diodes (OLEDs). However, influences of parameters concerning intermolecular interactions in solid state have not yet been explored. Herein, we proposed molecular dipole moment as a pre-experimental parameter to evaluate an emitter’s performance in the solid state. By extracting efficiency data of OLEDs based on blue-emitting molecules from literature and calculating the dipole moments of these molecules, we found a clear inverse relationship. Three deep blue TADF emitters with similar molecular emitting properties were designed and synthesized. The PL efficiency of their solid films and device performance was found to decrease as the molecular dipole increased. Specifically, TDBA-SPQ with the smallest dipole moments of 1.86 D delivered much better performance in both vacuum-processed and solution-processed non-doped OLEDs with record-high EQEmax of 22.7% and 15.2% with CIE-y coordinates of 0.136 and 0.123, respectively.

Introducing chirality in porous organic cages through solid-state interactions.

Molecular cages contain an internal cavity designed to encapsulate other molecules, resulting in applications in molecular separation, gas storage, and catalysis. Introducing chirality in cage molecules can improve the selective separation of chiral molecules and add new functionalities due to the realisation of chiral photophysical properties. It has recently been shown that solid-state supramolecular interactions between achiral cages can result in the formation of chiral cavities. Here, we develop a computational technique to predict when achiral cages form chiral cavities in the solid-state through the combination of atomistic calculations and coarse-grained modelling to predict the crystalline phase behaviour. Our focus is on the achiral cage B11, which contains rotatable arene rings on the vertices of the cage that can form propeller-like orientations, inducing a chiral cavity. We show that by using dimer pair calculations, we can inform coarse-grained models to predict the packing of the cage. Our results reveal how the supramolecular interactions drive chirality in the achiral cages without the need for a chiral guest. These findings are a first step towards understanding how we can design chirality through supramolecular interactions by using abstract coarse-grained models to inform design principles for targeted solid-state phase behaviour.

4,5-Diiodo-1-H-imidazole-derived linker ligand and Cu(i) and Co(ii) coordination polymers based thereupon

A new iodine-rich imidazole derivative 1,4-bis(4,5-diiodo-1H-imidazol-1-yl)butane (bimbI4, 1) features multiple I⋯I interactions in the solid state.

Origin of gamma surface asymmetries in body-centered cubic refractory high entropy alloys

In this study, we develop an understanding of the effect of high stacking fault elements in the γ-surfaces and twinnability of NbMoTaW refractory High Entropy Alloy (HEA) using first-principles density functional theory calculations. γ-surfaces developed low energy pathways leading to asymmetries by controlling the concentration of high stacking fault energy elements in the HEA. This effect was correlated to the strength of specific solid-state pair interactions using the projected crystal orbital Hamilton population analysis, and they were found to be weak except for W-Mo and W-Ta. Since the interactions involving Tungsten are stronger than the other interactions, stacking fault and twin formation are less likely to happen near tungsten-rich portions of the alloy. This suggests the formation of tungsten-deficient twin boundaries in NbMoTaW which will further improve the ductility of the system. Stable twin fault energy as low as 522 mJ/m2 is reported for the equimolar random atomic configurations of the HEA system. The ratio between twin boundary migration energy and the difference in unstable stacking fault energies (γTBMΔus) was found to be as low as 0.13 suggesting deformation twinning can happen in the HEA system. Vibrational analysis of the alloy system has indicated that tungsten and tantalum contribute to the acoustic phonon frequencies of the HEA. Fundamental insights from this study will help in engineering high entropy alloys with high strength and ductility.

Synthesis of magnesium-containing calcium phosphates by methods of chemical precipitation in aqueous solutions and solid-state interaction

The peculiarities of the partial isovalent substitution of calcium atoms by magnesium in the structure of -Са3(РО4)2 within the compositions of Ca10.5–хMgx(PO4)7 (х=0.4, 0.8, 1.0 and 1.5) were investigated by methods of chemical precipitation in aqueous solutions and solid-state interaction. In the first case, the biphasic calcium phosphates (based on Са10(РО4)6(ОН)2 and -Са3(РО4)2) doped with magnesium cations as well as monophasic Ca9.5Mg(PO4)7 and Ca9Mg1.5(PO4)7 (whitlockite-related, trigonal system, space group R-3c) were prepared as a result of mixing aqueous solutions at molar ratios Ca2+:Mg2+:PO43–=(10.5–x):x:7 (where x=0.4, 0.8, 1.0 and 1.5), with further evaporation of water and heating of the solid residue at a temperature of 6000С (for 2 hours). The biphasic calcium phosphates were also obtained by the solid-state interaction of initial components at the temperature range of 500–7000С (for 6 hours) and the same molar ratios Ca2+:Mg2+:PО43–=(10.5–х):х:7 (х=0.4, 0.8, 1.0 and 1.5). It was found that only the apatite-type phase (Са10(РО4)6(ОН)2) contains magnesium, and the content of this phase in the biphasic composites increases with the growing of magnesium amount in the initial mixtures. The established conditions of the formation of single phasic whitlockite-related magnesium-containing calcium phosphates as well as biphasic composites of modified calcium phosphates can be used in the future to obtain bioactive materials for medical purposes.

Simple scaling of the empirical London dispersion corrections in DFT geometry optimizations of prototypical nonlinear optical crystals

AbstractThe quantum treatment of electrons at the Kohn‐Sham Density Functional Theory (DFT) level of approximation is used in order to optimize the structure of four organic and organo‐metallic crystalline systems, starting from experimentally determined structures, allowing subsequent quantum‐level theoretical analysis, the accent here being put on crystals having nonlinear optical (NLO) properties. By employing DFT, one must select an exchange‐correlation functional (XCF), that is, a mathematical description of the electron interactions. Among most of the XCFs, a well‐known general discrepancy is the lack of London‐type interactions description. One of the most popular correction schemes consists of adding a posteriori the contribution of these interactions by using empirical expressions. Here, the approach relies on the simple D* scheme, a variation of the D2 correction originally elaborated by Grimme for molecular clusters, where the D2 correction is scaled to account for the interactions in the crystal solid state. The performance of this simple D* scheme is demonstrated and the most suitable scaling factors for four prototypical organic and organo‐metallic NLO crystals are determined for four representative XCFs: zero (no correction) for PBESol, PBESol0, and B97X, and 0.7 for B3LYP.

Nanohybrid Composites Based on TiO2 and Single-Walled Carbon Nanohorns as Promising Catalysts for Photodegradation of Amoxicillin.

In this work, applications of nanohybrid composites based on titanium dioxide (TiO2) with anatase crystallin phase and single-walled carbon nanohorns (SWCNHs) as promising catalysts for the photodegradation of amoxicillin (AMOX) are reported. In this order, TiO2/SWCNH composites were prepared by the solid-state interaction of the two chemical compounds. The increase in the SWCNH concentration in the TiO2/SWCNH composite mass, from 1 wt.% to 5 wt.% and 10 wt.% induces (i) a change in the relative intensity ratio of the Raman lines located at 145 and 1595 cm-1, which are attributed to the Eg(1) vibrational mode of TiO2 and the graphitic structure of SWCNHs; and (ii) a gradual increase in the IR band absorbance at 1735 cm-1 because of the formation of new carboxylic groups on the SWCNHs' surface. The best photocatalytic properties were obtained for the TiO2/SWCNH composite with a SWCNH concentration of 5 wt.%, when approx. 92.4% of AMOX removal was achieved after 90 min of UV irradiation. The TiO2/SWCNH composite is a more efficient catalyst in AMOX photodegradation than TiO2 as a consequence of the SWCNHs' presence, which acts as a capture agent for the photogenerated electrons of TiO2 hindering the electron-hole recombination. The high stability of the TiO2/SWCNH composite with a SWCNH concentration of 5 wt.% is proved by the reusing of the catalyst in six photodegradation cycles of the 98.5 μM AMOX solution, when the efficiency decreases from 92.4% up to 78%.

Wet granulation of co-amorphous indomethacin systems

The feasibility of co-amorphous systems to be wet granulated together with microcrystalline cellulose (MCC) was investigated. Solid state and molecular interactions were analysed for various co-amorphous drug-amino acid formulations of indomethacin with tryptophan and arginine, respectively, via XRPD, DSC and FTIR. The co-amorphous binary systems were produced by ball-milling for 90 min at different molar ratios followed by wet granulation with MCC and water in a miniaturised scale. Tryptophan containing systems showed crystalline reflections in their XRPD diffractograms and endothermal events in their DSC analyses, and were therefore excluded from upscaling attempts. The systems containing arginine were found to be remain amorphous for at least ten months and were upscaled for production in a high-shear blender under application of two different parameter settings. Under the harsher instrument settings, a composition with a low MCC ratio experienced recrystallisation during wet granulation, while all other compositions could be successfully processed via wet granulation and stayed stable for a storage period of at least twelve weeks, indicating that wet granulation of co-amorphous systems can be feasible.

Evaluation of Tungsten—Steel Solid-State Bonding: Options and the Role of CALPHAD to Screen Diffusion Bonding Interlayers

Critical aspects of innovative design in engineering disciplines like infrastructure, transportation, and medical applications require the joining of dissimilar materials. This study investigates the literature on solid-state bonding techniques, with a particular focus on diffusion bonding, as an effective method for establishing engineering bonds. Welding and brazing, while widely used, may pose challenges when joining materials with large differences in melting temperature and can lead to mechanical property degradation. In contrast, diffusion bonding offers a lower temperature process that relies on solid-state interactions to develop bond strength. The joining of tungsten and steel, especially for fusion reactors, presents a unique challenge due to the significant disparity in melting temperatures and the propensity to form brittle intermetallics. Here, diffusion characteristics of tungsten–steel interfaces are examined and the influence of bonding parameters on mechanical properties are investigated. Additionally, CALPHAD modeling is employed to explore joining parameters, thermal stability, and diffusion kinetics. The insights from this research can be extended to join numerous dissimilar materials for specific applications such as aerospace, automobile industry, power plants, etc., enabling advanced and robust design with high efficiency.