Solid-phase Microextraction Device Research Articles

Proteomic Analysis of Human Saliva via Solid-Phase Microextraction Coupled with Liquid Chromatography-Mass Spectrometry.

Proteomics of human saliva samples was achieved for the first time via biocompatible solid-phase microextraction (bio-SPME) devices. Upon introduction of a porogen to a conventional C18 coating, porous C18/polyacrylonitrile (PAN) SPME blades were able to extract peptides up to 3.0 kDa and more peptides than commercial SPME blades. Following Trypsin digestion, salivary proteomic analysis was achieved via SPME-LC-MS/MS. Seven endogenous proteins were consistently identified in all saliva samples via bio-SPME. Taking advantage of this strategy, untargeted peptidomics was applied for the comparison of saliva samples between healthy and SARS-CoV-2 positive individuals. The results showed clear peptidomic differences between the viral and healthy saliva samples. This proof-of-concept study demonstrates the potential of bio-SPME-LC-MS/MS for peptidomics and proteomics in biomedical applications.

Selective Sampling to and Desorption from Single Solid-Phase Microextraction Arrow Fiber for Replicative and Quantitative Analysis.

New analytical functionality is demonstrated with an enclosed interface that joins a solid phase microextraction (SPME) device, a direct analysis in real time (DART) probe, and a high-resolution mass spectrometer. With a single 20 mm long SPME Arrow, the interface is able to perform five discrete DART analyses on different areas of the same fiber in 1 min of practical operation time. Three-fiber replicates for 15 runs total produce 15% or better center of variance (CV) values for both volatile headspace sampling and direct immersion sampling of a solvated analyte. Chemometric analysis of rapidly acquired headspace data is able to distinguish volatile profiles. Selective desorption within the interface also confers the ability to selectively sample to discrete areas of a fiber, and three different headspace samples or five different liquid samples can be acquired and differentiated with one Arrow. A five-point standard addition curve is constructed to measure the concentration of the solvated analyte. Unmodified commercial components of the analysis system include the fiber itself, the Orbitrap and AccuTOF mass spectrometer platforms, and the conditioning gas chromatograph inlet. Machine diagrams for the SPME-DART interface and Arrow fiber holder are included.

Development of a high-throughput DNA isolation method for livestock and poultry meat based on mesoporous metal-organic framework-coated solid-phase microextraction device

A rapid, portable, simple, low-cost, and high-throughput DNA isolation method was developed for the quantitative identification of meat adulteration based on mesoporous UiO-66 coated solid phase microextraction (SPME) devices. The high-throughput DNA extraction system consists of 96 UiO-66 SPME devices and a polyformaldehyde plate, which can extract DNA from 96 livestock and poultry meat samples simultaneously. At the same time, several parameters of the high throughput DNA isolation method were optimized, including lysis buffer volume, elution buffer volume, lysis time and elution time, etc. Compared with the single DNA isolation device, the 96-SPME high-throughput extraction system maintains the original good universality, reproducibility, chemical stability, and reusability. On this basis, it obtained higher DNA concentration (80 ± 34 ng μL−1), satisfactory DNA purity (A260/A280=2.4) and shorter extraction time (less than 7.2 s per sample), which are much more convenient and efficient than the conventional kit method and the single SPME DNA isolation method. In addition, the conventional multiplex polymerase chain reaction and real-time polymerase chain reaction techniques were used for the qualitative and quantitative detection of meat adulteration. The DNA obtained from this extraction method is highly reproducible and sensitive for the identification of duck ingredients in beef, with a detection range of 1–100 % and a minimum detection limit of 1 % (w/w).

Solid phase microextraction device coupled with miniature mass spectrometry and mathematical model of its ion chronogram

Modern solid phase microextraction (SPME) device linked with mass spectrometry (SPME-MS) has evolved from producing ion chronogram as flat noisy signal to as unimodal-like signal. We designed a SPME device, which is closer in morphology to LC column, linked it with a miniature mass spectrometer (SPME-Mini MS), and proposed a mathematical model that elution of compound from the SPME device is equivalent to overlay of elution of the compound from the infinite LC columns with the lengths between 0 and the length of the device and it can generate an ion chronogram as right-skew unimodal signal. Rhodamine B as analyte was used for experimental verification and its unimodal signal was used to fit the parameters of a computer simulation program based on the model. The experimental results and simulations empirically cross-confirmed that SPME-Mini MS can generate ion chronogram as clean right-skew unimodal signal. Furthermore, the SPME-Mini MS system was used for quantitative analysis of psychotropic drugs (i.e. risperidone and aripiprazole) in artificial urine. The results preliminarily demonstrated that the system can utilize area under unimodal signal for quantitative analysis and has potential to be applied for on-site, fast and accurate quantification of drugs and other compounds.

Analysis of 14 β-agonists in pork using an automated wooden tip-based solid-phase microextraction device and ultra-high-performance liquid chromatography-tandem mass spectrometry.

This study introduces a cost-effective, automated ultra-high-performance liquid chromatography-tandem mass spectrometry method for the detection of 14 β-agonists in pork using a novel solid-phase microextraction probe composed of polyacrylonitrile and molecularly imprinted polymer. Integrated into an automated extraction device, the probe optimizes extraction prior to analysis while reducing expenses and time compared to traditional solid-phase extraction procedures. The method validation followed the Chinese National Standard (GB/T 27404-2008) and examined limits of detection, limits of quantification, matrix effects, linearity, intraday, and interday precision. Average recovery rates ranged from 71.6% to 82.2%, with relative standard deviations less than 15%. Limits of detection and limits of quantification ranged from 0.09 to 0.39 and 0.27 to 0.99μg/kg, respectively. The new method identified positive samples more accurately than the current National Standard GB/T 31658.22-2022 and demonstrated its potential for routine assessment and regulatory compliance in the detection of β-agonists in pork.

Embedding Mixed Sorbents in Binder: Solid-Phase Microextraction Coating with Wide Extraction Coverage and Its Application in Environmental Water Analysis.

Solid-phase microextraction (SPME) is a simple and highly effective sample-preparation technique for water analysis. However, the extraction coverage of a given SPME device with a specific coating can be an issue when analyzing multiple environmental contaminants. Therefore, instead of synthesizing one sorbent material with dual or multiple functions, we investigated a new strategy of preparing SPME blades using a homogeneous slurry made by mixing three different sorbent particles─namely, hydrophobic/lipophilic balanced (HLB), HLB-weak cationic exchange (HLB-WCX), and HLB-weak anionic exchange (HLB-WAX)─with a polyacrylonitrile (PAN) binder. The developed coating is matrix compatible, as the binder functions not only as a glue for immobilizing the sorbent particles but also as a porous filter, which only allows small molecules to enter the pores and interact with the particles, thus avoiding contamination from large elements. The results confirmed that the proposed mixed-coating SPME device provides good extraction performance for polar and nonpolar as well as positively and negatively charged compounds. Based on this device, three comprehensive analytical methodologies─high-throughput SPME-LC-MS/MS (for the quantitative analysis of targeted drugs of abuse and artificial sweeteners), in-bottle SPME-LC-high resolution MS (HRMS) (for the untargeted screening of organic contaminants), and on-site drone sampling SPME-LC-HRMS (for on-site sampling and untargeted screening)─were developed for use in environmental water analysis. The resultant data confirm that the proposed strategies enable comprehensive water quality assessment by using a single SPME device.

Preparation of sulfonic acid functionalized covalent organic framework solid phase microextraction fibers and their application in the analysis of neurotransmitters in the mouse brain

Neurotransmitters (NTs) are essential for intercellular communication and primarily include monoamine, amino acid, and cholinergic NTs. These molecules play important roles in the body's stress response, motor coordination, neuronal communication, and homeostatic functions. Previous studies have shown that abnormal changes in NT levels are associated with various neurological disorders. Therefore, the development of accurate analytical methods for NT detection will enhance the current understanding on complex neuropathophysiology by providing functional knowledge and techniques for early diagnosis, thereby facilitating the development of new therapeutic options for the related diseases. The solid phase microextraction (SPME) technique combines sample preparation, separation, and enrichment in a single step and is minimally invasive, low cost, solvent free, and high throughput. SPME has been successfully applied to the in vivo analysis of target analytes in animal, human, and plant tissues. The coating material plays a significant role in the development of in vivo SPME methods and must meet various analytical requirements, including a suitable geometry for the SPME device, high extraction capacity, excellent selectivity, and wide extraction coverage for the target analytes. Covalent organic frameworks (COFs) are porous crystalline polymers constructed from organic framework units through strong covalent bonds; these materials are characterized with a low density, large specific surface area, permanent porosity, excellent chemical/thermal stability, and easy functionalization.In this study, a sulfonic acid-functionalized COF material (COF-SO3H) with good crystallinity, excellent chemical/thermal stability, strong hydrophobicity, a uniform mesoporous structure, and narrow pore size distribution was prepared using 2,4,6-triformylphloroglucinol and 1,4-diamino-2-nitrobenzene as monomers. Then, the COF-SO3H was coated onto the surface of stainless-steel fibers and used for in vivo enrichment of NTs. The structural properties of COF-SO3H were characterized using various techniques, such as scanning electron microscopy (SEM), Fourier transform-infrared spectroscopy (FT-IR), and X-ray diffraction (XRD), all of which showed that COF-SO3H had a good crystalline structure and uniform mesopore distribution with a specific surface area of 46.17 m2/g. Compared with the SPME fibers of HLB, C18, MCX, amino, and PXC columns, the prepared COF-SO3H fibers showed better extraction efficiency for the target NTs. Next, the factors affecting SPME efficiency were optimized. The optimal desorption solvent was formic acid-methanol-water (0.5∶49.5∶50, v/v/v), and the optimal extraction and desorption times were 15 min. A method for the in vivo analysis of NTs in the brains of mice was established by combining the COF-SO3H fibers with ultra performance liquid chromatography-tandem mass spectrometry (UPLC-MS/MS) under optimal conditions. The NTs were separated on an Acquity UPLC BEH-C18 analytical column (100 mm×2.1 mm, 1.7 μm) with 0.1% formic acid aqueous solution (A) and acetonitrile (B) as the mobile phases. The flow rate was set to 0.2 mL/min, and the gradient elution procedure was as follows: 0-4 min, 5%B-6%B; 4-7 min, 6%B-5%B; 7-11 min, 5%B. Under optimal conditions, the method showed good linearity (r2>0.99). The limits of quantification (S/N≥5) were in the range of 0.003-0.005 μg/mL and 3-5 μg/mL for monoamine and amino acid NTs, respectively, with RSDs of less than 20%. The method showed good precision (0.80%-9.70%) and accuracy (2.08%-17.72%), with absolute matrix effects in the range of 82.22%-117.92%. These values reflect the good purification and enrichment abilities of the proposed fibers for the target analytes. Finally, the established SPME method was combined with UPLC-MS/MS and successfully applied to quantify target NTs in the brains of mice. The proposed strategy provides a practical method for the in vivo detection and quantitative analysis of NTs and expands the applications of functionalized COF materials for the analysis of various targets.

Microstructure quantification of oblique angle sputtered porous a-Si thin films as a basis for structure-property relations of solid phase microextraction coatings

Understanding processing-structure-property (PSP) linkages of solid-phase microextraction (SPME) coating materials is crucial for the rational design and advancement of these new materials. As SPME is a diffusion-based extraction technique, analyzing the morphology of its coating materials is important for optimizing its performance. In this study, we assess the morphological evolution of micro/mesoporous amorphous silicon (a-Si) thin films sputtered at an oblique angle onto silicon, which serve as models for support materials in SPME devices. The contrast of scanning transmission electron microscopy (STEM) images is enhanced via ZnO infiltration by atomic layer deposition (ALD). Various metrics, including physical descriptors and two-point statistics methods, are employed to follow the films' evolution. Analysis of the two-point correlation function reveals a simple ellipse/spherical local pore geometry in contrast to the long-range irregular arrangement of pores identified by a range of traditional and novel metrics. Additionally, analyzing the internal structure of the pores through homology metrics aligns well with the theoretical understanding of morphological evolution in oblique sputtered films. These analyses show that the “average ratio of principal moment of inertia”, “Betti numbers”, and “two-point statistics” based metrics can capture valuable information during film growth.The morphological analysis approach proposed in this study can be applied to analyze any nanoporous medium as a first step towards developing structure-property relationships that tie back to a given preparation method. Ultimately, a more extensive experimental and/or simulation-based study should confirm the correlations between these metrics and actual diffusion properties as the basis for process-structure-properties relations for improved design and optimization of this film.

Performance Evaluation of Extraction Coatings with Different Sorbent Particles and Binder Composition.

Binders are critical components used in the preparation of a range of extraction devices, including solid-phase microextraction (SPME) devices. While the main role of a binder is to affix the sorbent particles to the selected support, it is critical to select the optimal binder to ensure that it does not negatively impact the coating's particle sorption capability. This work presents the first comprehensive investigation of the interactions between binders and solid sorbent particles as these interactions can significantly impact the performance of the coating. Specifically, the findings presented herein provide a better understanding of the extraction mechanisms of composite coatings and new rules for predicting the particle adhesion forces and binder distribution in the coating. The influence of binder chemistry on coating performance is investigated by examining a selection of the most used binders, namely, polydimethylsiloxane (PDMS), polyacrylonitrile (PAN), poly(vinylidene difluoride) (PVDF), polytetrafluoroethylene amorphous fluoroplastics (PTFE AF 2400), and polybenzimidazole (PBI). The solid particles (e.g., hydrophilic-lipophilic balanced (HLB) and C18) used in this work were selected for their ability to provide optimal extraction coverage for a broad range of analytes. The results show that PDMS does not change the properties of the solid particles and that the binder occupies a negligible volume due to shrinking after polymerization, resulting in the solid particles making up most of the coating volume. Hence, the coating sorption characteristics correspond closely to the properties of the selected solid particles. On the other hand, the results also showed that PTFE AF 2400 can interact with the active surface of the sorbent, leading to the deactivation of the sorbent particles. Therefore, the extraction performance and permeability coefficients decrease as the size of the penetrant increases, indicating a rigid porous structure. The results of this study can aid in the optimization of SPME devices as they provide reference values that can be used to determine the optimal binder and the sorbent affinity for the targeted compounds. Finally, the present work also provides the broader scientific community with a strategy for investigating the properties of sorbent particle/binder structures and defines the characteristics of a good coating/membrane by analyzing all parameters such as kinetics, thermodynamic equilibria, and morphology.

Battery-Operated and Self-Heating Solid-Phase Microextraction Device for Field Detection and Long-Term Preservation of Mercury in Soil.

The application of headspace solid-phase microextraction (HS-SPME) for mercury preservation and detection still has several shortcomings, including the use of high-temperature desorption chamber, the consumption of expensive reagent (NaBEt4 or NaBPr4), and analyte loss during sample storage. Herein, a self-heating HS-SPME device using a gold-coated tungsten (Au@W) fiber was developed for the field detection of mercury in soil by miniature point discharge optical emission spectrometry (μPD-OES). Hg2+ was reduced to Hg0 with NaBH4 solution and then preconcentrated with the Au@W fiber. The adsorbed Hg0 could be rapidly desorbed by directly heating the fiber with a mini lithium battery and subsequently detected by μPD-OES. A limit of detection (LOD) of 0.008 mg kg-1 was obtained with a relative standard deviation (RSD) of 2.4%. The accuracy of the self-heating HS-SPME was evaluated by analyzing a soil certified reference material (CRM) and nine soil samples with satisfactory recoveries (86-111%). Compared to the conventional external heating method, the proposed method reduces desorption time and power consumption from 80 s and 60 W to 20 s and 2.5 W, respectively. Moreover, the self-heating device enables the μPD-OES system to remove the high-temperature desorption chamber, making it more compact and suitable for field analytical chemistry. Interestingly, the Au@W SPME fiber can be also used for the long-term preservation of mercury with a sample loss rate <5% after 30 days of storage at room temperature.

A simple and portable vacuum assisted headspace solid phase microextraction device coupled to gas chromatography based on covalent organic framework/metal organic framework hybrid for simultaneous analysis of volatile and semi-volatile compounds in soil

Various microextraction methods have demonstrated a positive effect when assisted by vacuum. However, working with such systems is often laborious, they often require expensive and non-portable vacuum pumps, and may even suck off some sample vapor or solid particles during the evacuation process. To address these issues, a simple, and affordable vacuum-assisted headspace solid-phase microextraction (HS-SPME) device was developed in this study. The device, named In Syringe Vacuum-assisted HS-SPME (ISV-HS-SPME), utilizes an adjustable 40 mL glass syringe as a vacuum provider and sampling vessel. A new fiber coating, made from a hybrid of covalent triazine-based frameworks and metal-organic frameworks (COF/MOF), was prepared and characterized by Fourier transform infrared spectrometry, field emission scanning electron microscopy, energy dispersive X-ray, X-ray diffraction, thermogravimetric analysis, and Brunauer–Emmett–Teller techniques for use in the ISV-HS-SPME. By optimizing parameters such as extraction temperature, extraction time, desorption temperature, desorption time, and, humidity using a simplex method, the ISV system was found to increase the extraction efficiency of polycyclic aromatic hydrocarbons (PAHs) and benzene, toluene, ethylbenzene, and xylenes (BTEX) in solid samples by up to 175%. The determinations were followed by GC-FID measurements. Compared to three commercially available fibers, the ISV-HS-SPME device with the COF/MOF (2DTP/MIL-101-Cr) fiber exhibited significantly higher peak areas for PAHs and BTEX. The linear dynamic ranges for BTEX and PAHs were 7.1–9000 ng g−1 and 0.23–9000 ng g−1, respectively, with limits of detection ranging from 2.1–5 ng g−1 for BTEX and 0.07–1.6 ng g−1 for PAHs. The relative standard deviation of the method was 2.6–7.8% for BTEX and 1.6–6.7% for PAHs. The ISV-HS-SPME was successfully used to simultaneously determine PAHs and BTEX in polluted soil samples with recoveries ranging from 80.4 to 108%.

Oxygen-doped graphite carbon nitride as a fiber coating material for headspace solid-phase microextraction of organic phosphate esters

Efficient enrichment of trace organic phosphate ester (OPEs) pollutants from complex matrixes is essential for chromatographic analysis. Herein, oxygen-doped graphite carbon nitride (denoted as O-g-C3N4) was fabricated though thermal polycondensation of urea using H2O2 as an oxygen source. The resulting O-g-C3N4 material was loose and had homogeneous pores structure, with a specific surface area of 73.74 m2/g. The O-g-C3N4 was served as fiber coating material to create solid phase microextraction (SPME) device, with silica sol as adhesive for OPEs determination. Owing to the well-developed porosity of O-g-C3N4, which provides effective mass transfer channels for OPEs, the whole SPME procedure could be accomplished within 25 min. The O-g-C3N4 fiber coating offers excellent mechanical strength and high stability and being workable after 180 sampling. The developed approach revealed a good linearity for OPEs in ultrapure water at the concentrations of 0.01–100 µg/L with the LODs between 0.001 µg/L and 0.003 µg/L. In addition, relative recoveries of 85.24% ∼99.73% were achieved in tap water and river water. These findings suggested that the oxygen-doped g-C3N4 material has potential for headspace SPME of trace OPEs in various matrixes.

High-Throughput and Rapid Screening of Drugs of Abuse in Saliva by Multi-Segment Injection Using Solid-Phase Microextraction-Automated Microfluidic Open Interface-Mass Spectrometry.

There is great demand for analytical methods capable of providing high-throughput and rapid screening, especially for anti-doping and clinical point-of-care applications. In this work, automated microfluidic open interface-mass spectrometry (MOI-MS) was used for coupling with high-throughput, automated solid-phase microextraction (SPME) to achieve this objective. The design of the MOI-MS interface provides a continuous and stable electrospray fluid flow to the MS without introducing any bubble, a feature that we exploit to introduce the concept of multi-segment injection for the determination of multiple samples in a single MS run. By eliminating the need to start a new MS run between sample assays, the developed approach provides significantly simplified protocols controlled by programmed software and increased reproducibility. Furthermore, the biocompatible SPME device, which utilizes coating consisting of hydrophilic-lipophilic balanced particles embedded in a polyacrylonitrile (PAN) binder, can be directly used for biological sample analysis, as the PAN acts as both a binder and a matrix-compatible barrier, thus enabling the enrichment of small molecules while eliminating interferences associated with the presence of interfering macromolecules. The above design was employed to develop a fast, quantitative method capable of analyzing drugs of abuse in saliva samples in as little as 75 s per sample. The findings indicate that the developed method provides good analytical performance, with limits of detection ranging between 0.05 and 5 ng/mL for analysis of 16 drugs of abuse, good calibration linear correlation coefficients (R2 ≥ 0.9957), accuracy between 81 and 120%, and excellent precision (RSD% < 13%). Finally, a proof-of-concept experiment was performed to demonstrate the method's suitability for real-time analysis in anti-doping applications.

Applications of functional materials-based solid phase microextraction technique in forensic science

Sample extraction is a crucial step in forensic analysis, especially when dealing with trace and ultra-trace levels of target analytes present in various complex matrices (e. g., soil, biological samples, and fire debris). Conventional sample preparation techniques include Soxhlet extraction and liquid-liquid extraction. However, these techniques are tedious, time-consuming, labor-intensive and require large amounts of solvents, which poses a threat to the environment and health of researchers. Moreover, sample loss and secondary pollution can easily occur during the preparation procedure. Conversely, the solid phase microextraction (SPME) technique either requires a small amount of solvent or no solvent at all. Its small and portable size, simple and fast operation, easy-to-realize automation, and other characteristics thus make it a widely used sample pretreatment technique. More attention was given to the preparation of SPME coatings by using various functional materials, as commercialized SPME devices used in early studies were expensive, fragile, and lacked selectivity. Examples of those functional materials include metal-organic frameworks, covalent organic frameworks, carbon-based materials, molecularly imprinted polymers, ionic liquids, and conducting polymers, all widely used in environmental monitoring, food analysis, and drug detection. However, these SPME coating materials have relatively few applications in forensics. Given the high potential of SPME technology for the in situ and efficient extraction of samples from crime scenes, this study briefly introduces functional coating materials and summarizes the applications of SPME coating materials for the analysis of explosives, ignitable liquids, illicit drugs, poisons, paints, and human odors. Compared to commercial coatings, functional material-based SPME coatings exhibit higher selectivity, sensitivity, and stability. These advantages are mainly achieved through the following approaches: First, the selectivity can be improved by increasing the π-π, hydrogen bonds, and hydrophilic/hydrophobic interactions between the materials and analytes. Second, the sensitivity can be improved by using porous materials or by increasing their porosity. Third, thermal, chemical, and mechanical stability can be improved by using robust materials or fixing the chemical bonding between the coating and substrate. In addition, composite materials with multiple advantages are gradually replacing the single materials. In terms of the substrate, the silica support was gradually replaced by the metal support. This study also outlines the existing shortcomings in forensic science analysis of functional material-based SPME techniques. First, the application of functional material-based SPME techniques in forensic science remains limited. On one hand, the analytes are narrow in scope. As far as explosive analysis is concerned, functional material-based SPME coatings are mainly applied to nitrobenzene explosives, while other categories, such as nitroamine and peroxides, are rarely or never involved. Research and development of coatings is insufficient and the application of COFs in forensic science has not yet been reported. Second, functional material-based SPME coatings have not been commercialized as they don't yet have inter-laboratory validation tests or established official standard analytical methods. Therefore, some suggestions are proposed for the future development of forensic science analyses of functional material-based SPME coatings. First, research and development of functional material-based SPME coatings, especially fiber coatings with broad-spectrum applicability and high sensitivity, or outstanding selectivity for some compounds, is still an important direction for SPME future research. Second, a theoretical calculation of the binding energy between the analyte and coating was introduced to guide the design of functional coatings and improve the screening efficiency of new coatings. Third, we expand its application in forensic science by expanding the number of analytes. Fourth, we focused on the promotion of functional material-based SPME coatings in conventional laboratories and established performance evaluation protocols for the commercialization of functional material-based SPME coatings. This study is expected to serve as a reference for peers engaged in related research.

Polyvinyl alcohol-based hydrogel sorbent for extraction of parabens in human milk samples by in-tube SPME-LC-UV.

In this work, we developed an in-tube solid-phase microextraction (SPME) device consisting of a fused silica capillary modified with a polyvinyl alcohol (PVOH) hydrogel. Methylparaben, ethylparaben, propylparaben, and butylparaben were determined in human milk samples by using the in-tube SPME device coupled with liquid chromatography with spectrophotometric detection in the ultraviolet region (LC-UV). The inner surface of the fused silica capillary was silanized to allow covalent modification with the PVOH-hydrogel, using glutaraldehyde as cross-linking agent. The developed device was used up to 250 times with no reduction in the analytes' peak areas or carryover effect, besides having a low production cost. The human milk samples showed a significant matrix effect for parabens with higher logKo/w. Low limits of quantification (LLOQ) between 10.0 and 15.0ngmL-1 were obtained with RSD values in the range of 1.18 to 18.3%. For the intra- and inter-day assays, RSD values from 5.6 to 16.5% and accuracy from 74.5 to 128.8% were achieved. The PVOH-based hydrogel sorbent allowed the use of water as desorption solvent, eliminating the use of organic solvents, which follows the principles of green chemistry. The results showed a great application potential of the PVOH-based hydrogel sorbent for the extraction of organic compounds from high-complexity samples.

Development of a polyurethane-coated thin film solid phase microextraction device for multi-residue monitoring of pesticides in fruit and tea beverages.

A novel solid-phase microextraction device coated with an efficient and cheap thin film of polyurethane was developed for trace determination of 13 widely used pesticides in fruit and tea beverages. A round-shaped polyurethane film covering the bottom of a glass vial was fabricated as the sorbent to exhibit a superior capacity for preconcentrating target compounds and reducing matrix interferences. After optimization of the key parameters including the film type, extraction time, solution pH, ionic strength, desorption solvent, and conditions, this device allowed an efficient adsorption-desorption cycle for the pesticides accomplished in one vial. Coupled with gas chromatography-electron capture detection, the polyurethane-coated thin film microextraction method was successfully established and applied for the analysis of real fruit and tea drinks, showing low limits of detection (0.001-0.015μg/L), wide linear ranges (1.0-500.0μg/L, r2 >0.9931), good relative recoveries (77.2%-106.3%) and negligible matrix effects (86.1%-107.5%) for the target pesticides. The proposed approach revealed strong potential of extending its application by flexibly modifying the type or size of the coating film. This study provides insights into the enrichment of contaminants from complex samples using inexpensive and reusable microextraction devices that can limit the environmental and health impact of the sample preparation protocol.

Comparison of different approaches for direct coupling of solid-phase microextraction to mass spectrometry for drugs of abuse analysis in plasma

The direct coupling of solid-phase microextraction (SPME) to mass spectrometry (MS) (SPME-MS) has proven to be an effective method for the fast screening and quantitative analysis of compounds in complex matrices such as blood and plasma. In recent years, our lab has developed three novel SPME-MS techniques: SPME-microfluidic open interface-MS (SPME-MOI-MS), coated blade spray-MS (CBS-MS), and SPME-probe electrospray ionization-MS (SPME-PESI-MS). The fast and high-throughput nature of these SPME-MS technologies makes them attractive options for point-of-care analysis and anti-doping testing. However, all these three techniques utilize different SPME geometries and were tested with different MS instruments. Lack of comparative data makes it difficult to determine which of these methodologies is the best option for any given application. This work fills this gap by making a comprehensive comparison of these three technologies with different SPME devices including SPME fibers, CBS blades, and SPME-PESI probes and SPME-liquid chromatography-MS (SPME-LC-MS) for the analysis of drugs of abuse using the same MS instrument. Furthermore, for the first time, we developed different desorption chambers for MOI-MS for coupling with SPME fibers, CBS blades, and SPME-PESI probes, thus illustrating the universality of this approach. In total, eight analytical methods were developed, with the experimental data showing that all the SPME-based methods provided good analytical performance with R2 of linearities larger than 0.9925, accuracies between 81% and 118%, and good precision with an RSD% ≤ 13%.

Sequential thin film-solid phase microextraction as a new strategy for addressing displacement and saturation effects in food analysis

Solid-phase microextraction (SPME) is robust, selective, sensitive, and can be automated. However, low extraction phase to sample volume ratio sometimes results in saturation, competition, or swelling phenomena in complex samples. A sequential extraction method using two thin-film SPME (TF-SPME) devices with different selectivities was developed. The sequential application of the thin films provided higher extraction capacities, while avoiding swelling, saturation, and displacement effects, and enabled the quantitative determination of all compounds in the analyzed samples, independent of their polarity and affinity to extraction phases. In the first step, a TF-SPME device with a poly(dimethylsiloxane) (PDMS) coating was used to deplete non-polar and other compounds present at high concentrations in the sample, which are typically associated with the undesirable phenomena. In the second step, a TF-SPME device coated with a combination of hydrophobic/lipophilic balanced (HLB) particles and PDMS (HLB/PDMS) was applied for the direct microextraction of the remaining compounds, including polar compounds left over after the first step. The proposed method resulted in decreased levels of interference and yielded encouraging analytical data for beer samples.

Applications of in vivo SPME based on mass spectrometry for environmental pollutants analysis and non-target metabolomics: A review

• Innovative SPME fibers and devices for in vivo sampling were summarized. • Applications of in vivo SPME on environmental pollutants analysis and non-target metabolomics were reviewed. • SPME coupled with mass spectrometry for in vivo analysis has been introduced. • The practical challenges and future perspectives for in vivo SPME are discussed. In vivo analysis of environmental organic pollutants and endogenous metabolites has great impacts on understanding their environmental behavior and exposure risks. This calls for the development of convenient and reliable analytical methods with either high specificity or wide coverage of target compounds in complex matrixes. Different from traditional solvent extraction, solid-phase microextraction (SPME) has emerged as an integrated sample preparation technique by combining sampling, extraction, and cleanup into one step, which exerts great potential on in vivo sampling due to its high sensitivity and low invasiveness. In this view, the design principles of SPME fibers for in vivo sampling, novel SPME fibers, and devices over recent years are summarized for the guidance of SPME fiber design. The applications of in vivo SPME on monitoring uptake, translocation, and degradation of environmental organic pollutants in organisms, as well as non-target metabolomics in environmental toxicology and clinical analysis based on mass spectrometry, are described. SPME fiber directly coupled with mass spectrometry for in vivo analysis has been introduced. The practical limitations and prospects of further research are also discussed. We conceive that in vivo SPME will promote the development of environmental analysis and toxicity assessment in a high-efficiency and high-throughput manner.

Velvet-like carbon nitride as a solid-phase microextraction fiber coating for determination of polycyclic aromatic hydrocarbons by gas chromatography

In this study, velvet-like carbon nitride (V-g-C3N4) was prepared from urea aqueous solutions by one-step thermal polycondensation. The V-g-C3N4 material was then characterized using a scanning electron microscope (SEM), X-ray diffractometer (XRD), Fourier transform infrared spectrophotometer (FT-IR), and nitrogen adsorption-desorption isotherms. The specific surface area of V-g-C3N4 (60.66 m2/g) was 1.8 times that of the carbon nitride (g-C3N4) prepared by the traditional method. V-g-C3N4 was modified on the surface of stainless-steel wire by a sol-gel technique to obtain a solid-phase microextraction (SPME) coating for the extraction of five polycyclic aromatic hydrocarbons (PAHs) from water samples. The chromatography signal of the PAHs extracted using the V-g-C3N4 coating was 1.5 times that when using a g-C3N4 coating, and 5–10 times that when using commercial PDMS. Under the optimized extraction conditions, the linear range of the method developed for the determination of five PAHs was 0.05–100 µg/L, the limits of detection were 0.005–0.012 µg/L, and the recoveries from actual water samples were 85.94–103.47%. Furthermore, the developed SPME device is remarkably durable and can be reused up to 160 times.