Solar Orientation Research Articles

Thermal Performance of Novel Eco-Friendly Prefabricated Walls for Thermal Comfort in Temperate Climates

The global threat of climate change has become increasingly severe, with the efficiency of buildings and the environment being significantly impacted. It is necessary to develop bioclimatic architectural systems that can effectively reduce energy consumption while bringing thermal comfort, reducing the impact of external temperatures. This study presents the results of a real-scale experimental house prototype, MHTITCA, using a unique design composed of novel eco-friendly prefabricated channel walls filled with a blend of soil, sawdust, and cement for walls and roofs. The experimental analysis performed in this study was based on dynamic climatology. A solar orientation chart of the place was constructed to identify the solar radiation intensity acting on the house. Measurements of roof surface temperatures were conducted to determine temperature damping and temperature wave lag. Monthly average temperature and direct solar radiation data of the site were considered. Compared to other alternative house prototypes, the system maximizes thermal comfort in high-oscillation temperate climates. Temperature measurements were taken inside and outside to evaluate the thermal performance. A thermal insulating layer was added outside the wall and the envelope to improve the prototype’s thermal comfort and reduce the decrement factor even more. This MHTITCA house prototype had 85% thermal comfort, 0% overheating, and 15% low heating. This eco-friendly prototype design had the best thermal performance, achieving a thermal lag of twelve hours, a reduced decrement factor of 0.109, and preventing overheating in areas with high thermal fluctuations. Comparatively, the other prototypes examined provided inferior thermal comfort. The suggested MHTITCA system can be an energy-saving and passive cooling option for thermal comfort in low-cost houses in temperate climates with high thermal oscillations in urban or rural settings.

An Overview of the Effects of Passive Solar Strategies on Thermal Comfort

The paper presents the impact of passive solar strategies on residential buildings concerning the thermal comfort factor. This study focuses on passive solar design elements like orientation, shading, and thermal mass to offer improved energy efficiency and occupant comfort. With a global natural gas crisis looming, interest in alternative heating and cooling is surging. With the growing concern of reducing the energy use by buildings while maintaining proper thermal comfort, both in cold and hot climates, the interest shifts to passive solar strategies. In this view, 547 publications have been analysed to reveal knowledge gaps and trends in the research. The bibliographic and thematic analysis techniques identified some approaches to passive solar design but no dominant method. Further, the study found under-researched areas within themes that appeared established. The authors have finally concluded with calls for further research and collaboration across institutions and nations to address these gaps and develop effective passive solar strategies. These findings contribute to sustainable architecture by pointing out the pros of applying passive solar strategies to reduce heating and cooling loads. In this respect, this was an original approach since it brought both quantitative and qualitative data together to measure thermal comfort. This is further underpinned by raising the need for energy-efficient building designs as measures toward mitigating climate change impacts.

The Impact of Street Trees on Temperature Reduction in a Nature-Based Climate Adaptation Program in George Town, Malaysia

Nature-based solutions have been promoted as an effective strategy to address climate impacts, including urban temperature reduction. In this paper, we analyze the impacts of the introduction of street trees on temperature (Universal Thermal Climate Index, UTCI) for three different dates, 2000, 2023, and 2050. A 3D model was developed in Rhinoceros software for a part of George Town, on Penang Island. Four different sections of streets were simulated after integration of the model with the Grasshopper plug-in, where a parametric system was built for temperature measurements based on simulations in the Ladybug and Honeybee plug-ins. The tree species used were selected from a pool of tree species commonly planted in urban settings in Malaysia that have low and medium sensitivity to climate impacts. The results show a maximum reduction of 7 °C between 2000 and 2050, achieved on a street with an NW–SE orientation that was planted with three rows of trees. The minimum UTCI reduction achieved was 3 °C, between 2023 and 2050, in a street with NW–SE orientation that was planted with one tree row. The two streets with a SW–NE orientation showed a 5 °C temperature reduction between 2023 and 2050. Both streets have only one row of trees but different species and sizes, with the bigger trees reducing the temperature in a slightly larger area. The results show the importance of introducing and safeguarding street trees to reduce urban temperatures in the country, potentially keeping temperatures below life-threatening levels, thereby safeguarding urban health, while also reducing costs of energy consumption. Solar orientation, the number of tree rows, and their distribution impact the outcomes. The findings provide useful guidance for climate-conscious urban planning practices in Malaysia.

Precise orbit determination for BeiDou-3 satellite with solar panel non-nominal orientation operations using telemetry information

Precise orbit determination for BeiDou-3 satellite with solar panel non-nominal orientation operations using telemetry information

Enhancing Building Sustainability: Integrating User Behaviour and Solar Orientation in the Thermal Performance of Houses

Enhancing Building Sustainability: Integrating User Behaviour and Solar Orientation in the Thermal Performance of Houses

Venus Magnetotail Long-Term Sensing Using Solar Sails

Propellantless propulsion systems, such as the well-known photonic solar sails that provide thrust by exploiting the solar radiation pressure, theoretically allow for extremely complex space missions that require a high value of velocity variation to be carried out. Such challenging space missions typically need the application of continuous thrust for a very long period of time, compared to the classic operational life of a space vehicle equipped with a more conventional propulsion system as, for example, an electric thruster. In this context, an interesting application of this propellantless thruster consists of using the solar sail-induced acceleration to artificially precess the apse line of a planetocentric elliptic orbit. This specific mission application was thoroughly investigated about twenty years ago in the context of the GeoSail Technology Reference Study, which analyzed the potential use of a spacecraft equipped with a small solar sail to perform an in situ study of the Earth’s upper magnetosphere. Taking inspiration from the GeoSail concept, this study analyzes the performance of a solar sail-based spacecraft in (artificially) precessing the apse line of a high elliptic orbit around Venus with the aim of exploring the planet’s induced magnetotail. In particular, during flight, the solar sail orientation is assumed to be Sun-facing, and the required thruster’s performance is evaluated as a function of the elliptic orbit’s characteristics by using both a simplified mathematical model of the spacecraft’s planetocentric dynamics and an approximate analytical approach. Numerical results show that a medium–low-performance sail is able to artificially precess the apse line of a Venus-centered orbit in order to ensure the long-term sensing of the planet’s induced magnetotail.

Design and Analysis of the Effect of the Number of Membership Functions on the Accuracy of the Fuzzy Controller in a Sun Tracking System

Purpose: To investigate how the number of rules in the fuzzy controller affects the single-axis solar tracking system's orientation accuracy. Methodology: Design and compare FLC49 and FLC25 controllers, each with different organic rules and functions. To improve the system efficiency by accurately measuring the maximum power point, the controller receives comparison results from the light sensors installed on the solar panels. We study and analyze the controllers, selecting the best one based on the accuracy of the solar panel orientation. Using the FLC output to operate a two-phase SM. Findings: This study developed a sun tracking system using Matlab/Simulink and compared FLC49 and FLC25 controllers. FLC49 performed better in simulations, with lower settling time and overshoot. The number of rules significantly influenced accuracy, and it also showed lower transient ripple magnitudes, accelerating time response. Unique Contribution to Theory, Practice and Policy: The research investigates the effectiveness of rules in a fuzzy controller and recommends the optimal number of windings to achieve precision in controlling a stepper motor. The study explores the use of 49-rule and 25-rule fuzzy logic controllers to control a stepper motor based on LDR sensor inputs. The researchers found that while both controllers had similar steady time error and overshoot, they differed in orientation accuracy, with the 49-roll fuzzy controller being more accurate in orientation. This single-axis solar tracking system optimizes solar energy conversion into electricity.

A Model Validatory Approach in Determining Solar Panel Tilting Angles and Orientations at the Brikama Environment of The Gambia

Solar energy demand in The Gambia has got a boost in recent times owning to it cleaner nature and affordability compared to other renewables and by this many people are shifting towards solar PV installation. To optimize the design of any PV system for maximum performance, adequate knowledge of the orientation and tilt angles of the solar panel against the sun radiation received by the solar panel is vital. This paper determines the solar optimal tilt angle and orientation of solar panels in the Brikama environment of The Gambia. This was achieved by comparing a mathematical model results with experimental data collected using a PV module (Model AP-120) manufactured by AstroPower, Inc., Deleware, USA, and single axis tracker technology at the same location and months of the year 2022. The experimental tilt angles obtained range from 29.85-30.14 with an average angle of 29.99 while the mathematical model approach obtained the tilt angle to be 30. By comparing all the values recorded during the experiment, the peak value of power generated by the solar panel was recorded at an angle of 30due South and this proves our techniques in determining the tilted angles with our applied model. The monthly tilt angles of the solar panel, which were averaged from the total months of the year and the average tilt angle in the Brikama environment is 15.5and the solar module should face south during installation for optimization. These results are vital in maximizing solar energy collection from photovoltaic systems.

Effect of solar panel orientation and EV charging profile on grid design

The implementation of solar coupled with daytime electric vehicle (EV) charging, aligns seamlessly with the broader goal of transitioning to a decarbonized grid and clean energy future. This paper explores how fixed-tilt solar arrays coupled with daytime EV charging would affect a future renewable-energy-driven grid in California. We use capacity-expansion modeling to identify the lowest-cost grid design for 40 scenarios that compare two solar panel mounting configurations (east–west versus south-facing), two EV charging profiles, five tilt angles ranging from 15°to 35°, and two assumptions about a long-duration energy storage (LDES) candidate resource. We then evaluate and discuss the mix of generators selected by the model for the various scenarios, the associated curtailment, and the implications about the best approaches for adding fixed-tilt solar arrays as part of transitioning to a new energy system. Although the east–west-facing solar orientation is expected to reduce the need for diurnal storage by being able to charge EVs early and late in the day, it appears that the better matching between seasonal supply and demand for the south-facing orientation is more important.

The Feasibility Study of a Solar Power Plant at Building B, Universitas Multimedia Nusantara

The use of environmentally friendly energy resources is becoming increasingly important in reducing the carbon footprint of buildings. One approach is to integrate solar power generation into the building's energy system. This research aims to reduce the carbon footprint by replacing conventional electricity sources with environmentally friendly renewable energy sources and integrating energy sources without disrupting the productivity of activities in Building B of Universitas Multimedia Nusantara (UMN). This study encompasses several key parameters, including the limited use of solar panels in Building B of UMN and simulations conducted using PVsyst software with shadow-free assumptions and solar panel orientation facing north. Additionally, the research considers the potential production of clean energy from available utilization areas, including the roof and fifth-floor balcony of Building B. This feasibility study also includes an analysis of electricity usage over three months, with electricity consumption sourced from PLN. The analysis results show that the use of solar panels can yield long-term economic benefits, with capital costs recoverable within 20 years. However, further review is needed regarding potential system losses, costs, and the addition of energy storage options. Cost calculations need to be adjusted to consider building owner profitability for more accurate results. This study only considers profits without accounting for repair and maintenance costs over the 20-year system operation period.

A Model Validatory Approach in Determining Solar Panel Tilting Angles and Orientations at the Brikama Environment of The Gambia

This paper determines the solar panel optimal tilt angle and orientations at the Brikama environment of The Gambia. This was achieved by comparing mathematical model results with experimental data collected using a PV module (Model AP-120) manufactured by AstroPower, USA, and a single-axis tracker technology at the same location and months of the year. The experimental tilt angles obtained range from 5.1°-28.2° with an average angle of 14.8° while the mathematical model approach obtained the tilt angle to be within the range of 9.1°-22.3° with a mean value of 15.5°. The generated power analysis revealed that the peak power produced by the solar panel was recorded at an angle of 30° due South and the mean power gain from the orientation of the PV panel ranged from 3.6-48.1W. The mean power result suggests that, in comparison to a horizontal position, solar collecting efficiency is higher at the optimal tilt angle.

Design and Implementation of an Intelligent Maximum Power Point Tracking Controller for Dual-Axis Solar Tracking Photovoltaic Systems

This research presents the design and implementation of an intelligent maximum power point tracking (MPPT) controller for dual-axis solar tracking photovoltaic (PV) systems. The proposed controller integrates an advanced MPPT algorithm with a dual-axis solar tracker mechanism to optimize energy extraction from PV panels. Sensor data is utilized to dynamically adjust the solar tracker's orientation and the PV array's operating point simultaneously. The system's hardware and software components are developed, including a microcontroller, sensors, motor drivers, and control algorithms. Experimental results demonstrate improved energy yield and efficiency compared to conventional fixed-axis or single-axis tracking systems. Keywords: Maximum Power Point Tracking, Dual-Axis Solar Tracking, Photovoltaic Systems, Intelligent Control, Energy Optimization

Optimizing solar panel orientation for enhanced power output in cloudy conditions: a case study on solar energy supply in a water treatment plant

This paper presents a study on optimizing the performance of a photovoltaic solar generator used to power a water treatment plant in a remote area. The research aims to evaluate the system's efficiency and focuses on determining the optimal orientation of the solar panel during periods of cloudy weather, which significantly impact sunlight availability and ozone production. To achieve this, two optimization algorithms, namely the Grey Wolf Algorithm (GWO) and the Crayfish Optimization Algorithm (COA), are employed to optimize the power output. The study is conducted in Algeria, where prevalent autumn cloud cover poses challenges for solar panel operation. By addressing these challenges and designing a high-performance photovoltaic-powered water treatment plant, the research contributes to sustainable water treatment technologies and offers promising solutions for underserved communities in need of water pumping and treatment systems. The findings highlight the importance of optimizing solar panel orientation in cloudy conditions and showcase the effectiveness of the GWO and COA algorithms in maximizing power output. By leveraging these optimization techniques, the proposed approach enhances the performance of the solar generator, ensuring efficient power production even during periods of reduced sunlight. This research not only addresses the specific case of a water treatment plant in a remote area but also has broader implications for the renewable energy sector. The study demonstrates the potential of utilizing solar energy in powering critical infrastructure, such as water treatment facilities, in areas where access to reliable electricity is limited. By fostering the adoption of sustainable energy solutions, this research contributes to the goal of achieving long-term environmental and social sustainability.

Energy Production Optimization by Positioning of Solar Panels and Surveillance System with Cleaning of Panels

The pursuit of efficient and sustainable energy generation has led to the widespread adoption of solar panels. However, the optimal performance of these panels can be hindered by factors such as dirt accumulation, suboptimal orientation, and security concerns. To address these challenges, we propose an integrated Solar Panel Tracking, Cleaning, and Surveillance System (SPTCSS). Our system employs advanced tracking technology to optimize solar panel orientation, ensuring maximum exposure to sunlight throughout the day. Additionally, it incorporates automated cleaning mechanisms, utilizing water and brushes to remove dust, debris, and other contaminants, thereby maintaining peak efficiency. Furthermore, the surveillance aspect of the system provides real-time monitoring and security features, safeguarding against theft, vandalism, and unauthorized access. Through a network of sensors and cameras, any anomalies or suspicious activities can be promptly detected and addressed. By integrating tracking, cleaning, and surveillance functionalities into a single system, our solution offers a comprehensive approach to enhancing the performance, longevity, and security of solar panel installations. This not only maximizes energy generation but also minimizes maintenance requirements and mitigates risks, ultimately contributing to a more sustainable and reliable renewable energy infrastructure

Solar Tracking Methods: A Comprehensive Survey

Abstract: In the pursuit of maximizing solar energy utilization, solar tracking systems have emerged as indispensable tools for enhancing the efficiency of photovoltaic (PV) systems. This comprehensive survey delves into the multifaceted landscape of solar tracking methods, elucidating the diverse techniques and strategies employed in optimizing solar panel orientation relative to the sun's position Solar tracking systems are classified into two primary categories: single-axis and dual-axis tracking. Single-axis tracking systems adjust solar panels along one axis, typically the azimuth axis, while dual-axis tracking systems dynamically alter both azimuth and elevation angles to accurately follow the sun's apparent motion across the sky.Within the realm of solar tracking, passive and active tracking methods are explored. Passive tracking mechanisms rely on natural phenomena such as gravity or thermal expansion to adjust panel orientation, whereas active tracking systems employ mechanical, electrical, or hydraulic actuators driven by motors or other means to actively adjust panel angles based on real-time tracking algorithms.A pivotal aspect of solar tracking systems is the selection and implementation of tracking algorithms. Various algorithms, including sun position algorithms, maximum power point tracking (MPPT) algorithms, and predictive algorithms, are analyzed for their effectiveness in accurately predicting and optimizing solar panel orientation.Furthermore, this survey scrutinizes the role of sensor technologies in solar tracking, encompassing GPS-based tracking, light-intensity-based tracking, weather-based tracking utilizing meteorological sensors, and horizon tracking techniques. These sensor-based methodologies offer different advantages and trade-offs in terms of accuracy, cost, and reliability. To provide a comprehensive understanding, comparative analyses are conducted, evaluating the efficiency, cost-effectiveness, and energy yield of different tracking methods. These comparative assessments offer valuable insights into the performance characteristics and suitability of various tracking methodologies across diverse applications and environmental conditions.In conclusion, this survey serves as an invaluable resource for researchers, engineers, and policymakers involved in the design, development, and optimization of solar tracking systems for renewable energy applications. By synthesizing the latest advancements and comparative analyses, this survey facilitates informed decision-making and fosters the advancement of sustainable solar energy technologies.

Simulation-Based Evaluation of the Impact of an Electrochromic Glazing on the Energy Use and Indoor Comfort of an Office Room

Electrochromic glazing alters its optical properties in the absence/presence of an electrical charge, varying from clear to dark to control daylighting and solar heat gains. This study aims to evaluate the impact of an electrochromic glazing, with indoor glare or temperature control, on the energy performance and thermal and visual comfort of an office room under three European climates, using a calibrated simulation model. The novelty of the paper lies in its combined performance assessment, using different standards and metrics. The results showed reduced climatization energy requirements with temperature control, but significantly increased artificial lighting energy use. Glare control achieved useful illuminance levels during 74–80% of working hours. Concerning temperature control, working hours within thermal comfort increased (21–43%) under a free-float regime. Moreover, the performance of this glazing was compared to that of a clear glazing with/without a reflective film and a thermochromic glazing for different solar orientations. The electrochromic glazing with glare control showed the highest energy savings (14–36%) for a western orientation, and the lowest negative impact on daylighting for a northern orientation. The best glare reduction was achieved with the reflective film. Considering the free-float regime, the electrochromic glazing, with temperature control, showed the highest increase in working hours within thermal comfort (6–9%) for a western orientation.

SNPP VIIRS solar vector orientation knowledge error revealed by solar diffuser stability monitor sun views

SNPP VIIRS solar vector orientation knowledge error revealed by solar diffuser stability monitor sun views

Influence of a Dual Axis IoT- Based Off-Grid Solar Tracking System and Wheatstone Bridge on Efficient Energy Harvesting and Management

Influence of a Dual Axis IoT- Based Off-Grid Solar Tracking System and Wheatstone Bridge on Efficient Energy Harvesting and Management

Solar Wall Technology and Its Impact on Building Performance

Solar walls provide transformative solutions by harnessing solar energy to generate electricity, improve thermal comfort, and reduce energy consumption and emissions, contributing to zero-energy buildings and mitigating climate change. In hot and humid regions, solar walls can reduce indoor temperatures by 30% to 50%, significantly improving energy efficiency. Optimizing the performance of solar walls includes factors such as glazing, shading, solar orientation, ventilation, and catalytic techniques, allowing them to be adapted to different climates. Innovative solar wall variants that include photovoltaic panels, water storage, and phase-change materials offer multifunctionality and sustainability in building design and are in line with global energy efficiency and environmentally conscious goals. In addition, innovative solar wall variants that combine photovoltaic panels, water storage, and phase-change materials promise even more sustainability in building design. These multifunctional solar wall systems can efficiently heat, cool, and generate energy, further reducing a building’s environmental impact. Solar walls have the potential to significantly reduce heating energy consumption; align with global goals for energy-efficient, environmentally conscious, and climate-responsive building design; and offer dynamic and adaptable solutions for sustainable architecture.

UV Exposure during Cycling as a Function of Solar Elevation and Orientation

Although cycling is the most prevalent means of locomotion in the world, little research has been done in evaluating the ultraviolet (UV) radiation exposure of cyclists. In this study, a volunteer using a men’s bike was equipped with 10 miniature UV-meters at different body sites. Besides erythemally effective irradiance, the ratio of personal UV exposure to ambient UV radiation was determined for solar elevations up to 65°, taking into account different orientations with respect to the sun. This method provides a universal model that allows for the calculation of UV exposure whenever ambient UV radiation and solar elevation are available. Our results show that the most exposed body sites are the back, forearm, upper arm, and anterior thigh, receiving between 50% and 75% of ambient UV radiation on average. For certain orientations, this percentage can reach 105% to 110%. However, the risk of UV overexposure depends on ambient UV radiation. At lower solar elevations (<40°), the risk of UV overexposure clearly decreases.