Solar Light Absorption Research Articles

Nanostructures/TiN layer/Al2O3 layer/TiN substrate configuration-based high-performance refractory metasurface solar absorber

Metasurface solar absorber serves as a kind of important component for green energy devices to convert solar electromagnetic waves into thermal energy. In this work, we design a new solar light absorber configuration that incorporates the titanium nitride substrate, aluminum oxide layer, titanium nitride layer, and the topmost refractory nanostructures. The metasurface absorber based on this configuration can achieve an average spectral absorption of over 91% and a total solar radiation absorption of 91.5% at ultra-wide wavelengths of 300–2500 nm. It is discovered that the excellent performance of the proposed metasurface absorber is attributed to the synergistic effects of surface plasmonic effect and Fabry–Pérot (FP) cavity resonance by comprehensive analysis of the simulated field distributions. Furthermore, the effect of geometrical parameter of the proposed configuration on absorber performance is studied, indicating the proposed configuration possesses a large fabrication tolerance. Moreover, the proposed configuration is not sensitive to the polarization direction and the angle of incident light. It is also found that the use of other refractory metal materials and other shapes as the topmost absorbent nanostructures also have good results with this configuration. This work can offer a universal platform for constructing and guiding the design of refractory metasurface solar absorbers.

Silk-based polyelectrolyte evaporator with excellent salt resistance for high-rate and stable solar desalination

Solar-driven interfacial evaporation technology is a promising solution to solve global freshwater shortages through desalination. However, salt accumulation in the evaporator affects light absorption and reduces evaporation efficiency, thereby significantly reducing the service life and operating efficiency of the evaporator. Herein, we propose a strategy for sustainable salt resistance that enables strong salt resistance and rapid water delivery by in situ polymerization of sodium acrylate (PAAS) on the directional channel. As a result, the as-prepared SF/rGO@PAAS can achieve a high evaporation rate of up to 2.31 kg m−2 h−1 and high evaporation efficiency of up to 98% under one sun, benefiting from the inherent hydrophilicity of silk fibroin (SF), the directional channel design of water transport layer, and the efficient solar light absorption in full spectrum of reduced graphene oxide (rGO). More importantly, due to the electrostatic effect of PAAS, the evaporator showed excellent salt resistance, with no salt precipitation for 5 days of continuous evaporation in simulated seawater (3.5 wt%) while maintaining the high evaporation rate. This salt resistant evaporator provides an effective solution to the salt accumulation and addresses a key challenge in sustainable desalination.

Tree-like 3D GNP-rPN composite structure for solar-thermal evaporation and photocatalytic degradation of antibiotic wastewater

To realize high-yield and long-term purification of wastewater containing antibiotic ciprofloxacin hydrochloride (CIP) and seawater, a tree-like 3D GNP-rPN solar-driven water evaporation and photocatalysis evaporator is developed by preparing and assembling GO/NPDI/PVA (GNP) hydrogel (canopy) and rGO/PU/NPDI (rPN) foam (trunk). The “tree-like” evaporation and photocatalysis evaporator design in this work has the following three characteristics: First of all, graphene oxide (GO) and reduced graphene oxide (rGO) sheets broaden the light absorption range of the photocatalyst perylene imide nanowires (NPDI), which facilitates absorption of more sunlight; secondly, GO and rGO adsorb pollutants in water and provide them to NPDI for catalytic degradation under sunlight irradiation because of their huge specific surface area; thirdly, the excellent photothermal conversion ability of GO and rGO converts solar energy into heat energy, thus facilitating the catalytic degradation of CIP by NPDI. Thanks to the reduced enthalpy of water evaporation by GNP hydrogel, the sufficient top-down water supply, the superior photocatalytic performance of NPDI nanowires, and the efficient solar light absorption and solar-thermal energy conversion of the GO sheets and NPDI nanowires, the resultant GNP-rPN evaporation and photocatalysis system achieves an average water evaporation rate of 2.84 kg m−2 h−1 and a CIP degradation efficiency of 74.04 % within 1 h under 1-sun irradiation. The GNP-rPN system exhibits an optimal degradation efficiency of 74.04 % for a CIP solution with an initial concentration of 10 mg/L within 1 h of irradiation, reaching a degradation efficiency of 96.37 % after 4 h, demonstrating its effectiveness in purifying antibiotic-laden wastewater.

Chemically bonded nonmetallic LSPR S-scheme hollow heterostructure for boosting photocatalytic performance

The light absorption, mass transfer, and charges separation are essential to the efficiency of photocatalytic reaction, but constructing photocatalyst with the three excellent properties is still challenging. Herein, the interfacial Mo-S bonds and oxygen vacancy synchronously decorated MoO3-x/Zn3In2S6 (MoO3-x/ZIS) heterostructure was rationally designed and synthesized. The oxygen-defective MoO3-x nanotubes showed hollow structure and local surface plasmonic resonance (LSPR) effect, which improved mass transfer and solar light absorption. Besides, the built-in electric field and interfacial Mo-S bond provided endogenetic impetus and channels for rapid photoexcited charge carriers transfer and separation. The photocatalytic hydrogen (H2) evolution and hydrogen peroxide (H2O2) production on optimal MoO3-x/ZIS composite were 17.34 and 4.47 mmol g−1 h−1, respectively. The apparent quantum efficiency of MoO3-x/ZIS for H2 evolution at 400 nm was about 13.92 %, which was 8.09 times higher than that of ZIS. Moreover, the MoO3-x/ZIS also displayed excellent activities on the selective 5-hydroxymethylfurfural dehydrogenation. The in-situ X-ray photoelectron spectroscopy, electron paramagnetic resonance, in-situ selective photodeposition, and density functional theory calculation confirmed the S-scheme charge transfer pathway between MoO3-x and ZIS. This study provides an effective avenue for designing multifunctional photocatalysts based on the synergistic effects of chemically bonded S-scheme heterostructure and nonmetallic LSPR effect.

The significant role of Z-scheme band alignment at the heterojunction for the enhanced photocatalytic H2 production in TiO2/BiNbO4/rGO nanocomposite

An efficient ternary TiO2/BiNbO4/rGO nanocomposite was prepared by a simple wet impregnation process. PXRD confirmed the tetragonal and orthorhombic crystalline natures of titanium dioxide (TiO2) and bismuth niobate (BiNbO4) respectively. The loading of BiNbO4 and reduced graphene oxide (rGO) shifted the light absorption of TiO2 to a longer wavelength from 400 to 430 nm. The suitable conduction band position of BiNbO4 facilitated a favourable band alignment to suppress the electron/hole (e−/h+) recombination in TiO2 via the Z scheme mechanism at the heterojunction. The excited electrons at the CB of TiO2 were easily transported via the fast electron accepting and conducting rGO matrix for the surface redox reactions with the improved charge transfer efficiency, which was confirmed by EIS and PL studies respectively. BiNbO4 and rGO synergistically improved the specific surface area and solar light absorption. EPR analysis confirmed the presence of increased oxygen vacancies at the heterojunction. Hence, the ternary TiO2/BiNbO4/rGO nanocomposite demonstrated an enhanced hydrogen evolution (8910 μ mol h−1 gcat−1) than bare TiO2 (4820 μ mol h−1 gcat−1), bare BiNbO4 (950 μ mol h−1 gcat−1) and TiO2/BiNbO4 (6730 μ mol h−1 gcat−1) under direct solar light. The optimum of 1 wt % BiNbO4 and rGO loaded TiO2 nanocomposite produced twice the H2 production than the bare TiO2. This also further confirms that rGO played a major role during the photocatalytic process by highlighting the potential of metal oxides combined with carbon material as an efficient photocatalyst which prominently enhances the H2 evolution.

Enhanced solar desalination with photothermal hydrophobic carbon nanotube-infused PVDF membranes in air-gap membrane distillation

This work aims to increase the efficiency of the solar powered-air gap membrane distillation (SP-AGMD) process; a desalination method driven by solar energy, providing an eco-friendly and sustainable approach to addressing global water shortages. The innovation lies in integrating photothermal hydrophobic multiwalled carbon nanotubes (h-MWCNTs), in varying weight percentages from 5 % to 60 %, into polyvinylidene fluoride (PVDF) membranes using the phase inversion membrane fabrication technique. The h-MWCNTs were synthesized through oxidation and functionalization with oleylamine (OL) to improve their photothermal properties. Their successful integration was confirmed via scanning electron microscopy (SEM), thermogravimetric analysis (TGA), Fourier transform infrared spectroscopy (FTIR), and Raman spectroscopy. The h-MWCNTs-based SP-AGMD membranes were further evaluated for wettability, liquid entry pressure (LEP), surface temperature, and solar absorbance, demonstrating significant solar light absorption and localized surface heating. This generated the necessary driving force for the AGMD process. Performance metrics such as vapor flux, salt rejection, specific thermal energy consumption, photothermal efficiency, and temperature polarization (TP) coefficient were significantly improved, especially with a 20 % h-MWCNTs addition, which tripled the solar-energy-driven flux and increased photothermal efficiency by 326 % under standard solar conditions, compared to unmodified membranes. All h-MWCNTs-based SP-AGMD membranes achieved over 99 % salt rejection. Lastly, the membranes were tested with real seawater to confirm their applicability for desalination. This photothermal approach offers a scalable, sustainable solution for water purification, making a significant advancement in membrane distillation technology.

A new type of pentagonal structure HgS2 monolayer with abundant active sites and low Gibbs free energy for photocatalytic water splitting

Discovery of new two-dimensional (2D) materials not only has important fundamental research significance but also has promising application prospects. Through systematic structure searching combined with density functional theory calculations and simulations, we predict a new 2D monolayer HgS2 material featuring with a previously unreported type of pentagonal structure with orthorhombic P21212 symmetry. The penta-HgS2 monolayer shows good thermal, thermodynamic, mechanical and dynamic stabilities, exhibiting ferroelastic phase transition with an ultralow switching energy barrier (about 1 meV/atom), high ultimate strength of 12 N/m, moderate indirect band gap of 2.25 eV. In addition, the penta-HgS2 monolayer shows significantly anisotropic carrier mobility with a large anisotropy ratio of 98.5 along the y direction. More importantly, the penta-HgS2 monolayer exhibits abundant catalytic active sites, low Gibbs free energy (ΔGH ranging from 0.656 to 1.687 eV) for hydrogen evolution reactions, excellent solar light absorption capacity (∼105 cm−1) with the solar-to-hydrogen efficiency reaching up to 11.83%. The excellent ultimate tensile ability and the ultralow ferroelastic phase transition energy barrier implies penta-HgS2 monolayer material can be used to manufacture flexible mechanical and nanoelectronic devices. The suitable band edge alignments, ultrahigh carrier mobility anisotropy, high catalytic activity and excellent visible light adsorption performance indicate that penta-HgS2 monolayer is a promising candidate photocatalyst for high-performance photocatalytic water splitting. The present work not only supplements a new member to the 2D pentagonal structure material family, but also points out its promising applications in nanoscale devices and photocatalytic hydrogen productions.

A C-modified engineering strategy of porous In2O3 catalysts for point-concentrated solar-driven photothermal CO2 hydrogenation

The solar-driven photothermal CO2 conversion serves as an effective approach for addressing the substantial challenges of energy crises and global environmental issues. In this work, various forms of In2O3 catalysts, including In2O3-c, In2O3-r, In2O3-s, and porous spherical In2O3, along with a C-modified porous spherical In2O3 catalyst (C-In2O3), were successfully synthesized through a hydrothermal method. An in-depth analysis was conducted to evaluate the performance of these catalysts in the point-concentrated solar-driven photothermal CO2 hydrogenation. As a result, the porous C-In2O3 catalyst exhibited a superior CO2 conversion rate of approximately 13.2 % under simulated sunlight irradiation, with a light intensity of 44.6 mW/cm2. Notably, all catalysts demonstrated nearly 100 % selectivity towards CO (CO production rate of around 8.51 mmol gcat−1h−1) during the photothermal catalytic reaction, without any formation of CH4. The outstanding performance of the C-In2O3 catalyst was attributed to the modification of In2O3 band structure by the incorporation of C, which significantly enhanced the intensive solar light absorption of the catalyst. Furthermore, incorporating C into In2O3 substantially augments its basic strength and significantly elevates the quantity of basic sites, thereby endowing it with outstanding CO2 adsorption and conversion capabilities. This work provides a C-modified engineering strategy to design efficient photothermal catalysts for boosting point-concentrated photothermal CO2 hydrogenation.

Synthesis of high-value porous carbon from waste plastics and structure regulation promote solar interface water evaporation

Water scarcity and waste plastics elimination are long-term problems facing sustainable development, and solar interface evaporation to produce clean water is regarded as a promising water treatment technology. Herein, we report on low-cost waste plastic bottles synthetic carbon-based photothermal materials. By KOH activation and perforation, the surface crack structure of porous carbon is formed to facilitate multi-stage reflection of solar light, and significantly improve the solar light absorbance and photothermal conversion ability. Three-dimensional solar evaporators with low thermal conductivity and super hydrophilic wood sponge are fabricated, and the rectangular hole is designed to regulate water movement and prevent heat dissipation. When exposed to 1 sun illumination (1 kW/m2), an evaporation rate of 1.59 kg·m-2·h-1 is achieved, along with an energy conversion efficiency of 88.49 %. In addition, different micro-surface rough structures are constructed to boost the solar light absorption, thereby enhancing the photothermal conversion ability, among which the micro-cone structure increased the evaporation rate to 1.93 kg·m−2·h−1, demonstrating excellent stability over 15 cycles. In the simulated sewage purification process, the removal rate of pollutants is 99.9 %, and the evaporator without obvious salt accumulation in the seawater for 24 h, showing good salt resistance and self-cleaning ability. This research has important reference value for high-value preparation of carbon-based photothermal materials from waste plastics, extraction of clean water and environmental sustainable protection.

Cobalt-Doped ZnO Nanocomposits for Efficient Dye Degradation: Charge Transfer.

Doping enhances the optical properties of high-band gap zinc oxide nanoparticles (ZnO NPs), essential for their photocatalytic activity. We used the combustion approach to synthesize cobalt-doped ZnO heterostructure (CDZO). By creating a mid-edge level, it was possible to tune the indirect band gap of the ZnO NPs from 3.1 eV to 1.8 eV. The red shift and reduction in the intensity of the photoluminescence (PL) spectra resulted from hindrances in electron-hole recombination and sp-d exchange interactions. These improved optical properties expanded the absorption of solar light and enhanced charge transfer. The field emission scanning electron microscopy (FESEM) image and elemental mapping analysis confirmed the CDZO's porous nature and the dopant's uniform distribution. The porosity, nanoscale size (25-55 nm), and crystallinity of the CDZO were further verified by high-resolution transmission electron microscopy (HRTEM) and selected area electron image analysis. The photocatalytic activity of the CDZO exhibited much greater efficiency (k=0.131 min-1) than that of ZnO NPs (k=0.017 min-1). Therefore, doped heterostructures show great promise for industrial-scale environmental remediation applications.

Novel Approach of Nanophotonic Electron Transfer for Augmenting Photosynthesis in Arachis hypogaea: A Biophysical Rationale behind the Plasmonic Enhancement of Chemical Energy Transfer.

Plant photosynthetic machinery is the main source of acquisition and conversion of solar energy to chemical energy with the capacity for autonomous self-repair. However, the major limitation of the chloroplast photosystem is that it can absorb light only within the visible range of the spectrum, which is roughly 50% of the incident solar radiation. Moreover, the photosynthetic apparatus is saturated by less than 10% of available sunlight. If the capacity of solar light absorption and the transmission of resulting photons through the photosynthetic electron transport chain (ETC) can be extended, the overall efficiency of photosynthesis can be improved. The plant nanobionic approach can address this via the introduction of nanoparticles into or in the vicinity of the photosynthetic machinery/chloroplast. We have studied this exceptional nanobionic-mediated capability of two optically active nanostructures and evaluated the impact of their optical properties on plant photosynthesis. Our study revealed that metal (Ag) and core-shell metal nanostructures (AgS) can increase light absorption and improve electron transport through ETC. Both nanostructures were found to have a beneficial effect on the photoluminescence property of the isolated chloroplast. Translocation studies confirmed systemic transportation of the nanomaterial in different plant tissues. The primary growth parameters showed no detrimental effect until 21 days of treatment on Arachis hypogaea. The nano silver/silica core/shell structure (AgS) was found to be more advantageous over nano silver (AgNP) in photon entrapment, light-dependent biochemical reactions, and toxicity parameters. In the future, these nanostructures can enhance photosynthesis by increasing light absorption and resulting in higher assimilatory power generation in the form of ATP and NADPH. This approach may lead to a paradigm shift toward a sustainable method for the configuration of plant chloroplast-based hybrid energy harvesting devices.

Light-trapping by wave interference in intermediate-thickness silicon solar cells

The power conversion efficiency of crystalline silicon (c − Si) solar cells have witnessed a 2.1% increase over the last 25 years due to improved carrier transport. Recently, the conversion efficiency of c − Si cell has reached 27.1% but falls well below the Shockley-Queisser limit as well as the statistical ray-optics based 29.43% limit. Further improvement of conversion efficiency requires reconsideration of traditional ray-trapping strategies for sunlight absorption. Wave-interference based light-trapping in photonic crystals (PhC) provides the opportunity to break the ray-optics based 4n 2 limit and offers the possibility of conversion efficiencies beyond 29.43% in c − Si cells. Using finite difference time domain simulations of Maxwell’s equations, we demonstrate photo-current densities above the 4n 2 limit in 50 − 300µm-thick inverted pyramid silicon PhCs, with lattice constant 3.1µm. Our 150µm-thick PhC design yields a maximum achievable photo-current density (MAPD) of 45.22mA/cm 2. We consider anti-reflection coatings and surface passivation consisting of SiO 2 − SiN x − Al 2 O 3 stacks. Our design optimization shows that a 80 − 120 − 150nm stack leads to slightly better solar light trapping in photonic crystal cells with thicknesses <50µm, whereas the 80 − 40 − 20nm stack performs better for cells with thicknesses >100µm. We show that replacing SiN x with SiC may improve the MAPD for PhC cells thinner than 100µm. For a fixed lattice constant of 3.1µm, we find no significant improvement in the solar absorption for 50 and 100µm-thick cells relative to a 15µm cell. A substantial improvement in the MAPD is observed for the 150µm cell, but there is practically no improvement in the solar light absorption beyond 150µm thickness.

Interfacial evaporation device based on melamine foam supported MOFs-derived CuS nanosheets for highly efficient water evaporation

Sunlight-driven interfacial evaporation has been considered an effective solution to address water scarcity and seawater desalination with minimal environmental impact. We designed a sunlight-driven interfacial evaporation device using the porous melamine foam (MF) as the carrier to stabilize the loading of metal−organic frameworks (MOFs) derived CuS nanosheets. The MOFs-derived CuS nanosheets (M-CuS) have a full-spectrum solar light absorption rate of 95 % and the porous channels existing inside M-CuS effectively improve the light capturing ability and contribute to the rapid thermal response of M-CuS. The M-CuS was loaded on the MF through the adhesion of polyvinyl alcohol (PVA) to obtain an integrated M-CuS/MF aerogel with a stable structure. PVA further improves the hydrophilicity of MF and ensures a continuous supply of water to M-CuS/MF during the evaporation process. The unique porous structure of M-CuS/MF further promotes the absorption of sunlight, and the low thermal conductivity of MF (0.036 Wm−1K−1) could reduce the radiative and convective heat loss from the material to the surrounding environment. The evaporation rate and photothermal conversion efficiency of CuS/MF are 1.46 kg m−2h−1 and 86 % under one sunlight, respectively. The continuous seawater evaporation cycle experiments (15 times) show that the device can maintain a stable evaporation rate. The excellent salt blocking performance of M-CuS/MF suggest the promising long-term stable desalination applications.

PdS-ZnS-Doped Electrospun Polymer Nanofibers as Effective Photocatalyst for Hydrogen Evolution

Poly(vinyl acetate) nanofibers doped with PdS-ZnS nanoparticles (PdS-ZnS/PVAc nanofibers) were fabricated via an electrospinning technique. PdS-ZnS nanoparticles were in situ synthesized by adding (NH4)2S solution to poly(vinyl acetate)/zinc acetate/palladium acetate solution. Electrospinning of the formed colloidal solution led to the formation of poly(vinyl acetate) nanofibers containing uniformly distributed PdS-ZnS nanoparticles. The prepared samples were characterized by field emission scanning electron microscopy, X-ray diffraction, transmission electron microscopy and Fourier transform infrared spectroscopy. In photocatalytic activity investigation, the PdS-ZnS/PVAc nanofibers showed remarkably enhanced performance towards water photosplitting under solar irradiation compared to the ZnS/PVAc nanofibers. This enhanced performance is attributed to the synergistic effects of heterostructured PdS-ZnS nanoparticles, which can improve photogenerated charge migration and solar light absorption.

Boosting quantum-structured solar cell light absorption through compressively strained superlattices

The escalating demand for improved energy conversion efficiency in vehicular applications of solar cells underscores the need for innovative solutions. This study focuses on enhancing the current density of GaAs middle cells within conventional Ge-based triple-junction solar cells to realize unprecedented levels of energy conversion efficiency. We introduced a novel superlattice configuration termed a compressively strained superlattice (CSSL) and demonstrated its integration into a p-i-n junction GaAs solar cell, achieving a current density increase of 1.03 mA cm−2 over conventional GaAs solar cells. Prior investigations have explored a strain-balanced superlattice (SBSL) to enhance GaAs middle cell current density. However, our findings establish the superiority of the CSSL over the SBSL in terms of current density improvement, with the CSSL featuring 1.59 times more quantum wells per unit length than the SBSL. This increase in quantum well quantity significantly enhances light absorption efficiency and consequently, the current density.

Construction of NaYF4:Yb,Er,Tb@NaYF4:Yb,Tb/NH2-MIL-88B(Fe) composite photocatalyst for effective photocatalytic degradation of antibiotics

Photocatalysis is an efficient and robust strategy to degrade the pollutant in the aqueous environment. However, the decomposition of antibiotics is still a perplexing problem due to the outstanding stability. To fabricate the heterogeneous photocatalyst upconversion nanoparticle (UCNPs)/metal–organic framework (MOFs) with the broadened solar light absorption, especially for the near-infrared (NIR) light, is a feasible pathway to accomplish the above goal. The heterogeneous photocatalyst, NaYF4:Yb,Er,Tb@NaYF4:Yb,Tb/NH2-MIL-88B(Fe) (ErTb@YYbTb/NMB), is firstly synthesized, in which the shell is coated along with the doped energy trapping ions to improve the upconversion efficiency. Under the simulated solar light, the degradation efficiency of ErTb@YYbTb/NMB reaches 76% for sulfamethoxazole (SMZ), 75% for ofloxacin (OFL), and 78% for norfloxacin (NOR). To elucidate the influence of energy trapping ions and coated shell, a series of UCNPs, NaYF4:Yb,Er (Er), NaYF4:Yb,Er,Tb (ErTb), NaYF4:Yb,Er,Tb@NaYF4:Yb (ErTb@YYb), and NaYF4:Yb,Er,Tb@NaYF4 (ErTb@Y) are also synthesized to compare with ErTb@YYbTb. The excellent performance of ErTb@YYbTb/NMB is attributed to the cooperation of covering the widened light spectrum, the enhanced upconversion emission intensity, and the feasible electron-hole separation, which are confirmed by the corresponding measurements including photoelectrochemical measurements, free radical and hole trapping experiments, and pump power dependence of upconversion emission intensities. Incorporation of UCNPs and MOFs to form the heterogeneous photocatalyst is a promising pathway to reach the ideal degradation goal for antibiotics.

An in-depth study of integrating cascaded photocatalytic H2O2 generation and activation with solar-driven interfacial evaporation for in-situ organic contaminant remediation

Integrating cascaded photocatalytic H2O2 generation and subsequent activation of H2O2 (into ·OH radicals) with solar-driven interfacial evaporation techniques offers an effective and sustainable approach for in-situ treating water contaminated with organic substances. Unlike traditional water-dispersed catalysts, the interfacial evaporation approach presents unique challenges in photocatalytic reactions. We explored these dynamics using an AgI/PPy/MF interfacial photothermal set, achieving H2O2 production efficiency (approximately 1.53 mM/g/h) – three times higher than submerged counterparts. This efficiency is attributed to exceptional solar light absorption (about 95 %), a significant surface photothermal effect (raising temperatures by approximately 36 °C), and enhanced oxygen availability (38 times more than in water), all characteristic of the interfacial system. The in-situ activation of H2O2 into ·OH notably improves the degradation of organic pollutants, achieving up to 99 % removal efficiency. This comprehensive analysis highlights the potential of combining photocatalytic H2O2 processes with interfacial evaporation for efficiently purifying organically polluted water.

Development and Fabrication of a Multi-Layer Planar Solar Light Absorber Achieving High Absorptivity and Ultra-Wideband Response from Visible Light to Infrared.

The objective of this study is to create a planar solar light absorber that exhibits exceptional absorption characteristics spanning from visible light to infrared across an ultra-wide spectral range. The eight layered structures of the absorber, from top to bottom, consisted of Al2O3, Ti, Al2O3, Ti, Al2O3, Ni, Al2O3, and Al. The COMSOL Multiphysics® simulation software (version 6.0) was utilized to construct the absorber model and perform simulation analyses. The first significant finding of this study is that as compared to absorbers featuring seven-layered structures (excluding the top Al2O3 layer) or using TiO2 or SiO2 layers as substituted for Al2O3 layer, the presence of the top Al2O3 layer demonstrated superior anti-reflection properties. Another noteworthy finding was that the top Al2O3 layer provided better impedance matching compared to scenarios where it was absent or replaced with TiO2 or SiO2 layers, enhancing the absorber's overall efficiency. Consequently, across the ultra-wideband spectrum spanning 350 to 1970 nm, the average absorptivity reached an impressive 96.76%. One significant novelty of this study was the utilization of various top-layer materials to assess the absorption and reflection spectra, along with the optical-impedance-matching properties of the designed absorber. Another notable contribution was the successful implementation of evaporation techniques for depositing and manufacturing this optimized absorber. A further innovation involved the use of transmission electron microscopy to observe the thickness of each deposition layer. Subsequently, the simulated and calculated absorption spectra of solar energy across the AM1.5 spectrum for both the designed and fabricated absorbers were compared, demonstrating a match between the measured and simulated results.

Differences and similarities in optical properties of coated fractal soot and its surrogates

Atmospheric soot (or black carbon, BC) affects climate through solar light absorption and scattering, which depend strongly on the particle morphology and composition. Initially, soot particles are fractal aggregates of spherules made of elemental carbon (EC), but condensation of atmospheric trace vapors adds non-EC materials and often results in particle compaction. The optical properties of such processed soot differ from those of fractal soot, and the changes are caused both by particle volume increase from coating addition and by restructuring of the EC backbone. In laboratory studies of soot optics, surrogates such as carbon black (CB) and nigrosin are often used in place of flame-generated soot. Our goal was to investigate if compositional and morphological differences between these surrogates and soot may produce different processing rates and optical responses. In our experiments, we generated fractal soot, compact CB, agglomerated CB (via coagulation of compact CB), and spherical nigrosin aerosol particles, subjected them to supersaturated vapor of dioctyl sebacate (DOS) to form a coating layer, and investigated the morphological response of these four particle types to coating addition and removal. Using coated and coated-denuded aerosol particles with known composition and morphology, we quantified the contributions of volume increase and restructuring to light scattering and absorption enhancements. By comparing experimental measurements against different particle optics models we show that it is crucial to account for larger, multiply charged particles present in the mobility-classified aerosol. Producing a disproportionately high contribution to absolute values of optical cross sections, such larger particles also result in lesser optical enhancements due to slower growth by vapor condensation. Scattering increases for all particle types due to the addition of a coating layer, and also due to restructuring for fractal soot (strongly) and agglomerated CB (weakly). Absorption increases only due to coating addition caused by the coating layer for all particle types. We find that simple optical models, such as Mie, are often sufficient to provide reasonable closure with experimental results for bare and coated aerosols, but only after accounting for the contributions from multiply charged particles, both in terms of their stronger optical cross sections and slower condensational growth. We conclude that CB is an appropriate surrogate for soot in aerosol aging studies where the effects of restructuring do not need to be considered and that nigrosin can be used as a general model for light-absorbing aerosols but is not representative of optical properties of soot.

All-weather-available down carbon fiber hydrogel with enhanced mechanical properties for simultaneous efficient clean water generation and dye adsorption from dye wastewater

Solar-driven photothermal conversion can produce clean water from dye wastewater while leaving the dye in the evaporation medium. Herein, a biomass-based composite hydrogel via down-fiber carbon (DFC) aerogel modified with chitosan-polyvinyl alcohol (CS-PVA) hydrogel was designed to address the aforementioned problem. The CS-PVA@DFC hydrogel integrated the capacity of simultaneous clean water production/dye adsorption during the day and continuous dye adsorption during the night. Furthermore, the modification of the CS-PVA hydrogel endowed the composite hydrogel with enhanced compression stress of 190.07 kPa (76.03 times that of DFC aerogel of 2.50 kPa) and impressive resilient recovery. Moreover, the CS-PVA@DFC hydrogel possessed solar light absorption of 99.56 % and strengthened water replenishment capacity due to the high porosity and CS-PVA hydrophilic network structure. The CS-PVA@DFC hydrogel demonstrated a stable, high evaporation rate of 2.34 kg·m−2·h−1 and simultaneous dye adsorption capacity of 70.39 % for treating methyl orange dye solution within 5 h. Additionally, the 24-h outdoor test showed that the CS-PVA@DFC hydrogel possessed excellent clean water production capacity during the daytime (reaching 4.17 kg·m−2·h−1 at 1:00p.m.) and continuous satisfactory dye adsorption capacity all day (89.68 %). These findings will inspire researchers seeking opportunities to improve the mechanical properties of aerogel and its application for treating wastewater, especially wastewater with harmful dyes.