Abstract

The power conversion efficiency of crystalline silicon (c − Si) solar cells have witnessed a 2.1% increase over the last 25 years due to improved carrier transport. Recently, the conversion efficiency of c − Si cell has reached 27.1% but falls well below the Shockley-Queisser limit as well as the statistical ray-optics based 29.43% limit. Further improvement of conversion efficiency requires reconsideration of traditional ray-trapping strategies for sunlight absorption. Wave-interference based light-trapping in photonic crystals (PhC) provides the opportunity to break the ray-optics based 4n 2 limit and offers the possibility of conversion efficiencies beyond 29.43% in c − Si cells. Using finite difference time domain simulations of Maxwell’s equations, we demonstrate photo-current densities above the 4n 2 limit in 50 − 300µm-thick inverted pyramid silicon PhCs, with lattice constant 3.1µm. Our 150µm-thick PhC design yields a maximum achievable photo-current density (MAPD) of 45.22mA/cm 2. We consider anti-reflection coatings and surface passivation consisting of SiO 2 − SiN x − Al 2 O 3 stacks. Our design optimization shows that a 80 − 120 − 150nm stack leads to slightly better solar light trapping in photonic crystal cells with thicknesses <50µm, whereas the 80 − 40 − 20nm stack performs better for cells with thicknesses >100µm. We show that replacing SiN x with SiC may improve the MAPD for PhC cells thinner than 100µm. For a fixed lattice constant of 3.1µm, we find no significant improvement in the solar absorption for 50 and 100µm-thick cells relative to a 15µm cell. A substantial improvement in the MAPD is observed for the 150µm cell, but there is practically no improvement in the solar light absorption beyond 150µm thickness.

Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call