Sol Gel Auto-combustion Method Research Articles

High Entropy Spinel Oxide (AlCrCoNiFe2)O as Highly Active Oxygen Evolution Reaction Catalysts.

The advancement of water electrolyzer technologies and the production of sustainable hydrogen fuel heavily rely on the development of efficient and cost-effective electrocatalysts for the oxygen evolution reaction (OER). High entropy ceramics, characterized by their unique properties, such as lattice distortion and high configurational entropy, hold significant promise for catalytic applications. In this study, we utilized the sol-gel autocombustion method to synthesize high entropy ceramics containing a combination of 3d transition metals and aluminum ((AlCrCoNiFe2)O). We then compared their electrocatalytic performance with other series of synthesized multimetal and monometallic oxides for the OER under alkaline conditions. Our electrochemical analysis revealed that the high entropy ceramics exhibited excellent performance and the lowest charge transfer resistance, Tafel slope (29 mV·dec-1), and overpotential (η10 = 230 mV). These remarkable results can be primarily attributed to the high entropy effect induced by the addition of Al, Cr, Co, Ni, and Fe, which introduces increased disorder and complexity into the material's structure. This, in turn, facilitates more efficient OER catalysis by providing diverse active sites and promoting optimal electronic configurations for the reaction. Furthermore, the strong electronic interactions among the constituent elements in the metallic spinels further enhance their catalytic activity in the initiation of the OER process. Combined with the reduced charge transfer resistance, these factors collectively play pivotal roles in enhancing the OER performance of the electrocatalysts. Overall, our study provides valuable insights into the design and development of high-performance electrocatalysts for sustainable energy applications. By harnessing the high entropy effect and leveraging strong electronic interactions, electrocatalytic materials can be tailored to improve efficiency and stability, thus advancing the progress of clean energy technologies.

Rietveld Refinement, Structural Morphology and Magnetic Properties of La0.57Sm0.1Sr0.33−xBaxMnO3 Manganite Nanoparticles

Lanthanide-based manganite perovskites due to their possible integration both in conventional Si-based electronics, and in innovative full-oxide electronics, have led to a massive resurgence of interest. The properties and applicability of these perovskites can be tailored with the interplay of foreign ion substation, and thus lot of efforts have been made by the researchers by using various types of compound combinations. In this work, a systematic study of Ba-substituted lanthanide of a chemical formula La[Formula: see text]Sm[Formula: see text]Sr[Formula: see text]Ba[Formula: see text]MnO3 (where, [Formula: see text], 0.05, 0.1, 0.20 and 0.33) was done and the manganites were synthesized by sol–gel auto-combustion method. The structural and magnetic properties were investigated by thermogravimetric/differential thermal analysis, which was also carried out to investigate the thermal stability of the prepared samples. X-ray diffraction (XRD) patterns, transmission electron microscopy (TEM), scanning electron microscopy (SEM) etc. were employed to investigate the crystallographic structure. XRD patterns and selected area electron diffraction patterns revealed the formation of single-phase La[Formula: see text]Sm[Formula: see text]Sr[Formula: see text]Ba[Formula: see text]MnO3 perovskite materials without any signature of secondary phases. Elemental composition of the synthesized samples was investigated by the energy dispersive analysis of X-ray analysis, which confirmed the expected stoichiometry of the prepared samples. TEM and SEM observations revealed the nano-crystalline nature of the prepared samples, where particle size obtained from TEM ranges from 40[Formula: see text]nm to 70[Formula: see text]nm. It has been found that structural and magnetic properties of the parent La[Formula: see text]Sm[Formula: see text]Sr[Formula: see text]MnO3 system were greatly affected by the Ba substitution.

Study of structural, spectral and dielectric properties of Dy substituted Sr2Co2Fe12-xDyxO22 Y-type hexaferrites via sol-gel auto-combustion method for microwave absorption application

In this research work, the dysprosium (Dy) substituted cobalt (Co) Y-type hexagonal ferrites having composition Sr2Co2Fe12-xDyxO22 (x = 0.00, 0.03, 0.06, 0.09, 0.12) were synthesized at temperature 1150 °C using sol-gel Auto combustion method. The research aims to enhance the dielectric, physical, and spectral characteristics of cobalt Y-type hexaferrite. This is achieved by changing the Fe-concentration through dysprosium substitution. XRD spectroscopy results confirmed the manufactured samples' developed pure-phase Y-type hexagonal structure and the successful substitution of Dy. The doping of dysprosium ions led to an overall rise in lattice parameters. FTIR was used to investigate the existence of bonds in the prepared sample. FTIR spectra presented two intrinsic vibrational bands (υ2) and (υ1) in a range of 400−600 cm−1 due to the octahedral and tetrahedral stretching vibrations. It also confirmed the incorporation of dopants, which was also studied in the XRD results. The broadening of Raman peaks of prepared samples displays that the Dy3+ ions are successfully incorporated in Sr2Co2Fe12O22 without disturbing the structure. X-ray photoelectron spectroscopy shows that all metal ions are in the necessary valence states. Magnetic properties such as saturation, remanence, and coercivity of the Dy-doped Sr Y type hexagonal ferrites are also evaluated. Dielectric characterization has revealed better dielectric properties. The dielectric characteristics were analyzed from 0.001 MHz to 6 GHz frequency range. The effect of the grain boundaries and grains on the dielectric behavior was studied from the complex impedance analysis. At x = 0.12, Dy substituted Co Y type hexaferrite sample show minimum reflection losses of −45.27 dB at 2.19 GHz. Therefore, the prepared samples are suitable candidates for microwave absorption applications.

Effect of the interaction of Fe- and Ce-contents on the structure and magnetic properties of M-type strontium ferrites

Sr1-xCexFe12O19 and Sr1-xCexFe12-yO19-δ (x = 0–0.2, y = 0–2) powders were synthesized by sol-gel auto-combustion method, and the effect on the structure and magnetic properties of changes in doping concentration and iron content has been investigated. XRD results confirmed the formation of M phase and impurities of CeO2 and Fe2O3. The SEM results show that cerium doping leads to a decrease in grain size. For Sr1-xCexFe12O19, the saturation magnetization increases to 77.73 emu/g first and then decreases with the increase of cerium doping. More importantly, our study also found that as the Ce doping concentration and iron content change, the interaction between the two changes differently. This interaction will have different effects on the occupancy of iron ions at spin-up and spin-down sites, ultimately leading to a significant characteristic change in magnetic properties. For Sr1-xCexFe12-yO19-δ, with the iron content decreases, the magnetic properties continue to decrease at x = 0.03, increase first and then decrease at x = 0.1, and keep improving at x = 0.2. It is of reference significance to change the magnetic properties of strontium ferrites by adjusting the relationship between rare earth doping concentration and iron content.

Structural, Optical, and Morphological Study of Manganese Substituted Cobalt Ferrite and Its Effect on the Magnetic and Dielectric Properties of PVA Composites

Nanopowders of Mn-substituted CoFe2O4 were prepared in different proportions using the sol-gel auto-combustion method and were structurally and morphologically studied. In another step, composites based on polyvinyl alcohol (PVA) with Mn-substituted CoFe2O4 fillers were prepared, and the effect of the Mn-substituted CoFe2O4 on the optical, magnetic, and dielectric properties was studied. X-ray analysis revealed the formation of polycrystalline Mn-substituted CoFe2O4. The results showed a decrease in the lattice constant with Mn2+ substituted and incorporated into the crystal structure of CoFe2O4. The Fourier confirmed the spinel structure of the Mn-substituted CoFe2O4 transform infrared spectrum where absorption bands appeared at 569–561 and 446–407 cm-1, which are attributed to tetrahedral and octahedral groups. The magnetic properties were affected when Mn ions were substituted with CoFe2O4, as shown by the results of VSM. It was observed that the saturation magnetization, remnant magnetization, and coercivity decreased with increasing Mn content. The dielectric constant and loss tangent of PVA/MnxCo1−xFe2O4 were also studied. The difference in the diameters of the substituted and host ions causes the dielectric constant to increase following the substitution of Mn ions.

Transition metal ion doped Mg-Zn manganites for optoelectronic device applications

This work aimed at synthesizing Mg0.5Zn0.5Mn1.95(Fe/Co/Ni)0.05O4 nanoparticles using sol–gel auto-combustion method. Structural studies (XRD, Rietveld, Raman) confirmed the tetragonal spinel structure with I41/amd space group and average crystallite size ranged between 18–22.8 nm. The morphologies and compositions of these nanoparticles were studied using SEM and EDX. UV–Vis spectra demonstrated significant enhancement in the absorbance values. The estimated optical band gaps vary between 1.6 to 1.77 eV. Frequency-dependent dielectric and impedance spectroscopic studies (at room temperature) reveal exciting results. Thus, tailoring of dielectric properties and optical band gaps of these transition metals doped Mg-Zn manganite nanoparticles may find potential applications in optoelectronics devices.

Effect of Cr3+ substitution on the structural and magnetic properties of Co-Cu-Zn nano ferrites

Nano-ferrite materials with chemical compositions Co0.5Cu0.45Zn0.05Fe2-xCrxO4 (x = 0.0, 0.05, 0.1, 0.15, 0.2, and 0.25) (Co-Cu-Zn) nano ferrite materials were synthesized through the sol–gel auto-combustion method, and analytical characterizations of their structural and magnetic properties were conducted. Utilizing the Debye-Scherrer equation, the average crystallite sizes of the synthesized samples were determined to range from 37.25 nm to 53.56 nm, and X-ray diffraction (XRD) examination verified the synthesis of a single-phase cubic spinel structure. Microstructural and morphological properties were investigated using Field-Emission Scanning Electron Microscopy (FESEM) scanning, revealing grains in the nano-scale range. Two distinct peaks were observed at approximately 595 cm−1 and 392 cm−1, providing information about the functional groups of the samples’ chemical characteristics according to Fourier transform infrared analysis (FTIR). Room temperature vibrating sample magnetometer (VSM) analysis provided magnetic information on the materials, presenting various values of magnetic parameters. The samples’ hysteresis curves showed that the saturation magnetization and coercivity almost decreased when the dopant concentration in the host Co-Cu-Zn is increased.

Sol-gel synthesis of Cobalt-Bismuth substituted strontium hexaferrites and insight into structural refinement, Microstructural, dielectric and spectroscopic properties

Bi and Co-substituted strontium (SrFe12O19) hexaferrites were synthesized using the auto-combustion sol–gel method. The structural, Rietveld refinement, microstructural, spectroscopic, and dielectric characterizations were analyzed with X-ray powder diffraction (XRD), scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FT-IR) and Dielectric analysis, respectively. The XRD investigation of Sr1-xBixFe12-yCoyO19 with (x = 0–0.5, y = 0–1.0) confirmed the single phase of M−type hexagonal ferrites. The change in the value of lattice constant ‘a’ in between 5.87 and 5.95 and ‘c’ 22.07 to 23.81 to be noted. The crystallite size of prepared specimens was determined in (20–29) nm range. The specific stretching vibrations in the FTIR results approves (Fe/Co-O and Bi-O) at three different positions 437.59, 549.94, and 587.53 cm−1. The existence of these band from 437 to 588 cm−1 confirmed the hexagonal structure of these ferrites. The force constants at octahedral sites increased from 1.75 to 2.02 (Dyne cm−1) x 105 and shows insignificant behavior at tetrahedral sites in between (3.33–3.54) Dyne cm−1 x 105 with Bi-Co substitution. The first band 582 cm−1 (ʋ1), is due to the maximum restoring force and vibrations at the tetrahedral site. The second band at a lower wavenumber of ∼ 402 cm−1 (ʋ 2) is due to the vibrations at the octahedral site. The microstructure of all synthesized samples of M−type hexagonal ferrites confirmed using the SEM analysis. The dielectric measurements in 0 to 3 GHZ frequency was done and effect of Bi-Co has been observed. The dielectric constant of all specimens shows the increasing trend from 1.5 GHz to 2.5 GHz with the frequency of the applied AC field. A slight increase was observed in the AC conductivity of these ferrites with the increasing concentration of Bi and Co ions.

Green synthesis of NiFe2O4, CoFe2O4, and Ni0.5Co0.5Fe2O4 by sol–gel autocombustion method using olive leaf extract as fuel

Green synthesis of NiFe2O4, CoFe2O4, and Ni0.5Co0.5Fe2O4 by sol–gel autocombustion method using olive leaf extract as fuel

Strong correlation of electrical transport and magnetic properties to ionic states, structure, and morphology of Al-substituted Ni–Co ferrite systems: A comprehensive study

This paper presents the structure, morphology, magnetic, ionic states, and electrical transport characteristics of spinel Ni0.5Co0.5AlxFe2-xO4 (x = 0.0, 0.5, and 1.0) nanocrystalline ferrites, synthesized by using the sol-gel auto-combustion method. Fourier transform infrared spectroscopy (FTIR) and X-ray diffraction (XRD) were used to analyze the structural characteristics. The synthesized ferrites were found to have a crystallite size of less than 40 nm when the Rietveld method was applied to refine XRD patterns in single-phase cubic spinel-related structures that belong to the Fd-3m space group. Furthermore, since the ionic states are visible in X-ray photoelectron spectroscopy (XPS), variations in Al3+ ion concentration have been found to affect the locations, occupancy, and Wyckoff's cationic position of the ions as well as the lattice constant (a), the crystallite size (D), and the micro-strain of the composites. Thermogravimetric analysis was used to examine the temperature-dependent spinel phase formation and % weight loss of the sample. The x = 1.0 composition is said to be the best dielectric material out of the three samples since it has the highest polarization permittivity, the lowest dissipation factors, and exceptional temperature stability. These nanoparticles have relatively high impermanent magnetization values and are ferrimagnetic, according to the vibrating sample magnetometer (VSM) investigation. Additionally, it was found that the presence of Al3+ decreases the magnetization values of the spinel Ni0.5Co0.5AlxFe2-xO4 (x = 0.0, 0.5, and 1.0) system because the Al3+ exclusively occupies the Fe-sites, which reduces the super-exchange interaction between the Fe2+/Fe3+, Co2+/Co3+, and the Ni2+/Ni3+ ions. The unique magnetic characteristic of these compositions below 40 nm is predicted to make them appealing for storage applications.

Rietveld refined structural and sintering temperature dependent electromagnetic properties of Al3+ substituted Ni–Co ferrites prepared through sol–gel auto combustion method for high-frequency and microwave devices

Rietveld refined structural and sintering temperature dependent electromagnetic properties of Al3+ substituted Ni–Co ferrites prepared through sol–gel auto combustion method for high-frequency and microwave devices

Enhancing hydrogen generation from sodium borohydride hydrolysis and the role of a Co/CuFe2O4 nanocatalyst in a continuous flow system

In this study, a series of cobalt-based spinel ferrites catalysts, including nickel, cobalt, zinc, and copper ferrites, were synthesized using the sol–gel auto-combustion method followed by a chemical reduction process. These catalysts were employed for accelerating hydrogen generation via the sodium borohydride hydrolysis process. A continuous stirred tank reactor was used to perform catalytic reactor tests. All samples were subjected to analysis using XRD, FESEM, EDX, FTIR, and nitrogen adsorption–desorption techniques. The results revealed that the cobalt-based copper ferrite sample, Co/Cu-Ferrite, exhibited superior particle distribution, and porosity characteristics, as it achieved a high hydrogen generation rate of 2937 mL/min.gcat. In addition, the higher electrical donating property of Cu-Ferrite which leads to the increase in the electron density of the cobalt active sites can account for its superior performance towards hydrolysis of NaBH4. Using the Arrhenius equation and the zero-order reaction calculation, activation energy for the sodium borohydride hydrolysis reaction on the Co/Cu-Ferrite catalyst was determined to be 18.12 kJ/mol. This low activation energy compared to other cobalt-based spinel ferrite catalysts confirms the catalyst's superior performance as well. Additionally, the outcomes from the recycling experiments revealed a gradual decline in the catalyst's performance after each cycle during 4 repetitive cycles. The aforementioned properties render the Co/Cu-Ferrite catalyst an efficient catalyst for hydrogen generation through NaBH4 hydrolysis.

Preparation and structure investigation of polyethylene terephthalate polyester reinforced Ni0.5Zn0.5Fe2O4 nanoparticles for gamma ray shielding performance

Defects of high atomic materials gamma-ray shielding such as low chemical stability, low mechanical properties, and heaviness lead us to investigate other light and flexible materials such as polymers. Polymer-doped nanosized materials are the most frequently examined materials. In this study, polyethylene terephthalate [(C10H8O4)n] was doped with Ni0.5Zn0.5Fe2O4 nanoparticles up to 40 wt% (0.0, 10.0, 20.0, 40.0 wt%) prepared by Sol–Gel auto-combustion method with the help of Gelatin. The polyester/Nanofiller composite structures were identified using x-ray photoelectron spectroscopy, x-ray diffraction, Scanning, and Transmission electron microscope as well as density measurements. x-ray photoelectron spectroscopy confirmed the successful doping of nanofiller in the polyester structure as Zn signals appear in the atomic composition and Fe signals appear in the deconvolution of the peaks. x-ray diffraction, transmission, and scanning electron microscope display the same result. x-ray diffraction graph information with the Scherer equation offered the crystal size of the composite (26 nm). Polyester/nanofiller samples were scanned against gamma-ray and experimental shielding factors were computed using a narrow beam transmission technique with sodium iodide detector and two-point sources Cs-137 and Co-60. Experimental Linear and mass attenuation coefficient values swelled as percentages of nanofiller increased in the polyester structure. Experimental Mass attenuation values were compared with theoretical ones estimated from XCOM and Physics-X programs. The difference between them does not exceed 12% which is acceptable as the x-ray photoelectron spectroscopy atomic composition utilized in the theoretical data calculation does not reveal Ni signals. This may occur at the depth of the composite structure. Finally, the half-value layer, the Tenth value layer, and the Mean free path are determined experimentally, and their values are reduced as the nanofiller doping percentage rises in the structure. This result confirms the efficiency of nanofiller addition to the polyester structure to attenuate gamma-ray.

Exploring the impact of annealing temperature on morphological, structural, vibrational and electron paramagnetic resonance properties of starch-mediated spinel CoAl2O4: Experimental and DFT study

In the present work, CoAl2O4 nanoparticles were successfully synthesized using the simple auto-combustion sol-gel method employing starch as an organic fuel source. The effect of the annealing temperature on the structural, vibrational, morphological, and magnetic properties is studied. The obtained spherical nanoparticles have grain sizes ranging from 23.54 nm to 46.50 nm. X-ray diffraction (XRD) patterns reveal the formation of a face centered cubic (fcc) spinel phase with the Fd-3m space group for all prepared samples. The calculated average crystallite sizes exhibit an increase from 24.65 nm to 56.27 nm, consistent with the observed grain sizes. Density Functional Theory (DFT) calculations are applied to reach the optimized cell parameters as well as to confirm the structural properties of the synthetized CoAl2O4 nanoparticles. Geometry optimization of the CoAl2O4 spinel oxide is performed using the CASTEP module of Materials Studio software. The optimized unit cell, lattice parameter and unit cell volume were obtained from this simulation. The combined experimental and density functional theory study of structural properties of CoAl2O4 revealed that an increase in the calcination temperature leads to an increase in the volume of the unit cell and hence to an increase in the particles size. Fourier-transform infrared spectroscopy (FTIR) further corroborated these findings by demonstrating subtle shifts in characteristic CoAl2O4 absorption peaks with varying annealing temperatures. These peak shifts suggest a potential redistribution of Al³⁺ and Co2⁺ ions between tetrahedral and octahedral sites within the spinel structure. Electron paramagnetic resonance (EPR) spectroscopy revealed a magnetic state transition as a function of both the annealing temperature and the resulting crystallite size. Occupancy fluctuations of Al³⁺ and Co2⁺ ions at specific sites have also impacted on the nanoparticles color since the hue of the material depends on the valence state and the cationic coordination environment in the CoAl2O4 crystal lattice. Correlations between structural, vibrational, magnetic and color properties are presented to understanding how synthesis parameters influence CoAl2O4 characteristics which is essential for tailoring materials for specific applications.

Zinc oxide and nickel ferrite nanocomposite as an efficient photocatalyst for crystal violet dye degradation

In the present study, photocatalytic activity of NiFe2O4/ZnO nanocomposite was studied for the degradation of crystal violet dye. Microwave assisted green synthesis method was used for the synthesis of ZnO nanoparticles (NPs). Sol-gel auto-combustion method was used to synthesize NiFe2O4 (NiF) NPs. NiF/ZnO nanocomposite was synthesized through solid-state reaction method. Structural phase was confirmed through X-ray diffraction studies. ZnO NPs were found in wurtzite hexagonal structure whereas cubic spinel structure was found for NiF. NiF/ZnO nanocomposite was observed in both phases. The crystallite size was found to be 31 ± 1, 18 ± 2 and (95 ± 1)/(98 ± 1) nm, for NiF, ZnO and NiF/ZnO nanocomposite, respectively. The optical band gap was determined through UV–Visible spectroscopy and is found to be 1.67 ± 0.03, 2.70 ± 0.08 and 1.70 ± 0.05 eV for NiF, ZnO and NiF/ZnO nanocomposite, respectively. Infrared study of NiF showed the tetrahedral and octahedral band whereas for ZnO the characteristic band was observed. FESEM micrographs of NiF/ZnO nanocomposite showed the formation of agglomerated spherical particles and very less number of rod-like grains indicating the formation of NiF/ZnO nanocomposite. The photocatalytic activity of NiF, ZnO and NiF/ZnO nanocomposite for the degradation of crystal violet dye was studied. It was found that NiF, ZnO and NiF/ZnO nanocomposite showed 89 %, 90.46 % and 87.21 % degradation rate in 60, 120 and 50 min respectively.

Universal Dielectric Response in Electronically Correlated Functional Oxides CaCu3Ti4O12, LaFeO3, YFe0.5Cr0.5O3 and their Nanocomposites: A Comparative Study

AbstractCaCu3Ti4O12 (CCTO), LaFeO3 (LFO) and YFe0.5Cr0.5O3 (YFCO) were synthesized via conventional sol–gel auto–combustion method using citric acid as gelling agent. The X‐ray diffraction analysis revealed the phase purity of the samples. The energy dispersive X‐ray (EDX) analysis confirms the stoichiometry of the pristine phases. The average particle size obtained from the field emission Scanning electron microscopy (FE−SEM) images revealed that CaCu3Ti4O12 exhibits a broad range of particle size starting from a couple of hundreds of nanometer to micrometer, whereas that for LaFeO3 and YFe0.5Cr0.5O3 are about 110 nm and 50 nm, respectively. We have fabricated the new composites: CCTO–LFO, CCTO–YFCO and LFO–YFCO. The grain sizes of the composite phases are consistent with the pristine phases as they are prepared by at lower sintering temperatures and duration. The dielectric properties of these ceramic composites were compared to those of the pristine phases. The temperature and frequency dependent dielectric measurements reveal a wide range of dielectric constant with moderate tan δ values. The temperature dependent dielectric constant of the investigated samples varies from 100 to 1500 at room temperature and the data have been analyzed using universal dielectric response (UDR) model.

Investigation of structural, electrical, and magnetic variations of Ni-Zn-Co ferrites by substituting rare earth Ho3+ for high-frequency applications

The investigation of structural, magnetic, and electrical properties of Ni0.6Zn0.3Co0.1HoxFe2−xO4 (NZCHF, 0 ≤ x ≤ 0.2) ferrites, synthesized through the sol–gel autocombustion method, has been undertaken. The refined x-ray diffraction (XRD) analysis was performed for XRD data analysis using Fullprof Suite software and it confirmed a single-phase cubic spinel structure, with the determination of crystallite size, refinement parameters and lattice constants. The bulk density of the samples consistently remained lower than the x-ray density, with densities increasing proportionally to the enhancement of Ho concentration. FTIR analysis corroborated the presence of metal-oxygen bonds within the ferrite possessing a spinel cubic structure. 57Fe Mossbauer spectroscopy showed that the hyperfine magnetic field of tetrahedral (A) and octahedral (B) sites decreased with the substitution of Ho3+ ions that preferentially occupy the B site. The impedance analyzer and vibrating sample magnetometer (VSM) were utilized to measure the real and imaginary parts of the complex permeability and magnetic properties of the samples, respectively. Complex impedance plots were scrutinized to discern the contributions of grain and grain boundary resistances, providing insights into the electrical behavior of the ferrite samples. Furthermore, the introduction of Ho concentration led to alterations in other key properties of the ferrites, including coercivity (H c ), retentivity (M r ), anisotropy constant (K), and magnetic moment (μ B ).The impact of the rare-earth content on the magnetic features of the prepared NiZnCo ferrite microspheres was investigated by analyzing magnetic-hysteresis (M-H) loops, which showed soft ferrimagnetism. Concurrently, the dielectric constant and dielectric loss tangent of the studied samples exhibited a decrease with the rise in Ho3+ concentration. The expected reduction in tan loss in the prepared samples is attributed to the increase in ac resistivity associated with the higher Ho3+ content.

Enhanced magneto-dielectric characteristics of Ni–Cd ferrites/GNPs composites synthesized via sol-gel auto-combustion method

Graphene nanoplatelets (GNPs) and spinel ferrites (SFs) composites enhance their properties and enable multifunctional applications, ranging from electronics to environmental and biomedical fields. This study investigates the Ni0.4Cd0.6Fe2O4/x-GNPs (x = 0 %, 2.5 %, and 5 %) [NCF/0%GNPs, NCF/2.5%GNPs, and NCF/5%GNPs] composites prepared via sol-gel auto combustion (SGAC) synthesis and their enhanced magneto-dielectric characteristics. XRD analysis confirmed the formation of a single-phase spinel matrix of NCF/GNPs composites and observed that the crystallite size (D) was enhanced from 22.8 nm to 33.6 nm with the increasing concentration of GNPs. Moreover, the bandgap energy (Eg) was reduced with the incorporation of GNPs in the NCF sample. The dielectric constant and tangent loss were enhanced with the addition of GNPs in the NCF spinel lattice. The saturation magnetization and microwave operating frequency were reduced from 97.42 emu/g to 55.13 emu/g and 21.49 GHz–11.97 GHz, respectively, while the coercivity was observed to increase from 92.66 Oe to 263 Oe with the incorporation of GNPs in the NCF lattice. The study highlights the potential of NCF/GNPs composites for applications in electronics, energy storage, sensors, and biomedical devices.

Sol-gel auto-combustion synthesis of bimetallic Pt-Co/Al2O3 catalysts for hydrogen production via acetic acid steam reforming

Green hydrogen production from renewable biomass via bio-oil catalytic steam reforming was a prospective technology. In order to accelerate the development of high-performance and long-term catalyst, we selected acetic acid as a typical bio-oil model compound to carry out the studies of steam reforming. Excellent bimetallic Pt-Co/Al2O3 catalysts were prepared using a sol-gel auto-combustion method. The effects of the molar ratio of ethylene glycol: citric acid: metal ions (EG/CA/M) on the catalyst structure and subsequent reforming performance were systematically investigated. It was found that the catalyst’s textural properties, reducibility, basic sites, and the dispersion of active metal could be carefully tuned by the EG/CA/M ratio. The catalyst prepared under EG/CA/M ratio of 6:3:1 performed the best reactivity in acetic acid steam reforming, showing a 97.6% acetic acid conversion and a 96.6% H2 yield at the reaction conditions of 650 °C, steam to carbon molar ratio of 5, and space velocity of 6957 h–1. Furthermore, a bifunctional reaction mechanism of acetic acid catalytic steam reforming was proposed by in-situ diffuse reflective infrared Fourier transform spectroscopy analysis coupled with density functional theory calculations.

Influence of Pr-cations on structural, spectral, elemental, and electrical features of Zr2–R type ferrites

Hexagonal ferrites have gained much attraction due to extensive applications in telecommunication and stealth fields. R-type hexagonal ferrites are rare hexagonal ferrites used in various technological applications. In the current work, the sol-gel auto-combustion method was used to prepare samples of R-type hexagonal ferrites with the chemical formula BaZr2Fe4-xPrxO11 (x = 0.00, 0.03, 0.06, and 0.09) respectively. The impact of substituting Praseodymium (Pr) on its structural, electrical, dielectric, and magnetic properties was investigated. X-ray diffraction (XRD) patterns suggest all samples exhibit a single phase. The lattice parameters and unit cell volume experienced alterations with varying Praseodymium (Pr3+) substitution levels. The atomic dynamics study of the Pr-doped R-type hexagonal ferrites was evaluated using FTIR analysis. Two absorption bands in the infrared spectroscopy were utilized to designate the tetrahedral and octahedral sites. X-ray photoelectron spectroscopy (XPS) findings verified the presence of all metal ions alongside their respective electronic states. Jonscher's power law elucidates the conduction mechanism of charge carriers in the synthesized ferrite samples. Impedance analysis was employed to investigate the influence of relaxation time and grain boundaries on the electrical characteristics of the fabricated nanomaterials. Impedance Cole-Cole plots provide evidence that all samples demonstrate multiple relaxation processes of a non-Debye nature. The minimum reflection loss (RL) of −32.46 dB at 3.27 GHz was achieved for x = 0.09. Pr-doped R-type hexagonal ferrite has potential applications in microwave high-frequency applications.