Method For Remediation Of Soil Research Articles

Heat and mass transfer based on the low-temperature thermal treatment of hydrocarbons-impacted soil: A numerical simulation and sandbox validation

Thermal treatment can be an effective method for soil remediation, and numerical models play a crucial role in elucidating the underlying processes that affect efficacy. In this study, experiments were conducted to examine the low-temperature thermal treatment for removing n-hexane and n-octane from soil. The results showed that the removal of two alkanes followed the pseudo-first-order kinetics. Additionally, a quantitative relationship between kinetics constant and temperature was established. Based on experimental results, a simple mathematical model was presented via COMSOL Multiphysics 6.0. The processes considered in the model incorporated conductive and convective heat transfer, the vaporization latent heat, and the removal of organic contaminants which was quantified using an advection-dispersion equation combined with a pseudo-first-order kinetic. The developed model was first validated by a thermal treatment in a soil column, demonstrating conformity with the measured temperature and concentration values. Subsequently, the temporal and spatial changes in soil temperature and contaminant levels were evaluated for different heating temperatures. It was found that thermal conduction dominated heat transfer, whereas thermal convection caused by the migration of liquid water intensified when the temperature was higher than the boiling point. The completion time exhibited a correlation with the heating temperature. It was predicted that the time required to achieve a 90% removal efficiency could be shortened from 14 h to 9.5 h by elevating the heating temperature from 80 ℃ to 120 ℃. The study also investigated the impact of the initial water content on heat transfer. It was observed that the saturated soil showed the slowest heating rate and the longest boiling stage.

Harnessing the power of nonthermal Plasma: A breakthrough in stabilizing Thallium contaminants in soil and unveiling the mechanism

Thallium (Tl) is a highly toxic element and can accumulate in human body through food, water, or air and cause damage to multiple organs. In this study, the nonthermal plasma (NTP) was employed to irradiate the potassium dihydrogen phosphate (KH2PO4) and sodium diethyldithiocarbamate trihydrate (SDDC) to solve the issues brought by their poor stability and insufficient chelation capabilities in soils to intensify their performance on immobilizing monovalent Tl contaminants in soils. Both an orthogonal design (OD) and a central composite design (CCD) were adopted to arrange the multi-parametrical modification and stabilization experiments. The leaching toxicities ranging from 5.11 to 52.37 µg/L of Tl+ ions were obtained in the OD experiments. The changes in both NTP time and the molar ratios of KH2PO4 to SDDC had a significant effect on the activation procedure. The leaching concentration ranging from 0.37 to 7.34 µg/L was achieved in the CCD stabilization experiments. NTP activation and the rearrangement of the stabilization conditions both were beneficial to the transformation of physicochemical states of Tl pollutants in soils, which proved the existence of chemical immobilization brought by the irradiated stabilizers (NTP-PK-SDDCs) to the Tl contaminants. The stabilization process was targeted between only Tl contaminants and NTP-PK-SDDCs in soils. The NTP irradiation enhanced the physicochemical characteristics of stabilizers, further intensifying the immobilization of Tl species in the soils. The enhancement mechanism was attributed to the free radicals-induced doping, oxidation, and polycondensation and the bombards of electrons, which strengthened the electrostation and chemisorption of NTP-PK-SDDCs towards Tl ions. The potential impact of this study includes the development of more effective and sustainable remediation methods for Tl-contaminated soils, contributing to environmental protection and human health.

Role of keystone drives polycyclic aromatic hydrocarbons degradation and humification especially combined with aged contaminated soil in co-composting

Accumulation of persistent organic pollutants polycyclic aromatic hydrocarbons (PAHs) in soil has become a global problem. Composting is considered one of the more economical methods of soil remediation and is important for the resourceful use of wastes. Agroforestry waste is produced in huge amounts and is utilized at low rates, hence there is an urgent need to manage it. Here, leaf (LVS) or rice straw (SVS) was co-composting with aged contaminated soil to investigate bacteria interaction to PAHs degradation and humus formation. The degradation rate of high molecular weight PAHs (HMW-PAHs) in LVS and SVS reached 58.9% and 52.5%, and the low molecular weight PAHs (LMW-PAHs) were 77.5% and 65%. Meanwhile, the humus increased by 44.8% and 60.5% in LVS and SVS at the end of co-composting. The topological characteristics and community assembly of the bacterial community showed that LVS had higher complexity and more keystones than SVS, suggesting that LVS might more beneficial for the degradation of PAHs. The stability of the co-occurrence network and stochastic processes (dispersal limitation) dominated community assembly made SVS beneficial for humus formation. Mantel test and structural equation models indicated that the transformation of organic matter was important for PAHs degradation and humus formation. Degradation of HMW-PAHs led to bacterial succession, which affected the formation of precursors and ultimately increased the humus content. This study provided potential technology support for improving the quality of agroforestry organic waste composting and degrading PAHs in aged contaminated soil.

Combined Remediation Effects of Sewage Sludge and Phosphate Fertilizer on Pb-Polluted Soil from a Pb-Acid Battery Plant.

Pb soil pollution poses a serious health risk to both the environment and humans. Immobilization is the most common strategy for remediation of heavy metal polluted soil. In this study, municipal sewage sludge was used as an amendment for rehabilitation of Pb-contaminated soils, for agricultural use, near a lead-acid battery factory. The passivation effect was further improved by the addition of phosphate fertilizer. It was found that the leachable Pb content in soils was decreased from 49.6 mg kg-1 to 16.1-36.6 mg kg-1 after remediation of sludge for 45 d at applied dosage of municipal sewage sludge of 4-16 wt%, and further decreased to 14.3-34.3 mg kg-1 upon extension of the remediation period to 180 d. The addition of phosphate fertilizer greatly enhanced the Pb immobilization, with leachable Pb content decreased to 2.0-23.6 mg kg-1 with increasing dosage of phosphate fertilizer in range of 0.8-16 wt% after 180 d remediation. Plant assays showed that the bioavailability of Pb was significantly reduced by the soil remediation, with the content of absorbed Pb in mung bean roots decreased by as much as 87.0%. The decrease in mobility and biotoxicity of the soil Pb is mainly attributed to the speciation transformation of carbonate, Fe-Mn oxides and organic matter bound Pb to residue Pb under the synergism of reduction effect of sludge and acid dissolution and precipitation effect of phosphate fertilizer. This study suggests a new method for remediation of Pb-contaminated soil and utilization of municipal sewage sludge resources.

A Comprehensive Review of Remediation Strategies for Soil and Groundwater Contaminated with Explosives

This study offers an updated overview of the soil and water remediation strategies employed to address the widespread environmental and public health risks associated with explosive compounds, particularly TNT and RDX. Recognizing soil contamination originating from military activities, industrial accidents, and historical land use, this review delves into physical, chemical, and biological approaches to mitigating ecological and human health concerns. While physical methods like excavation and disposal are effective, their applicability is constrained by cost and logistical challenges for large contaminated areas. Chemical methods, such as oxidation and reduction, focus on transforming explosives into less toxic byproducts. Biological remediation utilizing plants and microorganisms emerges as a cost-effective and sustainable alternative. This review highlights challenges, including the persistence of explosive compounds, potential groundwater leaching, and the necessity for long-term monitoring. Emphasizing the need for site-specific strategies, considering the contaminant type, concentration, soil properties, and regulatory requirements, this study advocates for integrated and sustainable remediation approaches in pilot-scale applications. It concludes by evaluating the appropriate solution based on the advantages and disadvantages of the categories of soil and groundwater remediation methods. The duration, the effectiveness, and the cost of available technologies were estimated.

Impact of cellulose and lignin on restoration of vegetation and soil chemical properties for saline-alkali soil of songnen plain.

To explore the effects of cellulose and lignin on stimulating vegetation restoration and improving soil chemical properties in saline-alkali soil, a large area test was carried out, and 2 treatments were set up: T (cellulose and lignin+ Planted seeds) and CK (Planted seeds). In this study, the species, quantity, plant height, above-ground biomass, biodiversity of vegetation in the treated plots, the determination of soil chemical nutrient content, and the effect of cellulose and lignin on vegetation restoration in saline-alkali land were investigated. The results showed that: 1) Cellulose and lignin contributed to vegetation growth. Compared with CK treatment, plant height and aboveground biomass of T increased by 158.73% and 240.13%, respectively; 2) Cellulose and lignin improved soil structure, and soil porosity, and decreased soil compaction (21.95%); 3) Compared with CK treatment, T treatment decreased soil pH by 0.5 units, total salt content decreased by 30.95%, exchangeable Na+ decreased by 63.00%, and exchangeable sodium percentage (ESP) decreased by 61.51%. Furthermore, cellulose and lignin effectively improved the physical and chemical properties of saline-alkali soil, promoted the recovery of ecological environment in saline-alkali soil, and improved regional biodiversity, which will provide new methods for soil remediation and improvement in saline-alkali areas.

Bioremediation of urban soils contaminated with oil by-products - case study Cuenca, Ecuador

In Ecuador and several Latin American countries, the degree of contamination of urban soils by hazardous waste from petroleum derivatives is a matter of great concern, because according to the Environmental Protection Agency of the United States explains that a gallon of used lubricating oil contaminates a million gallons of water, the same that meets the needs of fifty people per year [1]. When oil is spilled on the land, it causes infertility in the soil because the used oil contains hydrocarbons that cause the death of the soil and transforms the vegetation into inert. Despite the existence of legislation regulating the use, storage, processing and treatment of waste, there are very few efficient methods that guarantee adequate environmental management of urban soil, either because they are technically complex or economically unfeasible. The objective of this research is to technically and economically evaluate the bioremediation of urban soils contaminated with petroleum derivatives in the city of Cuenca, Ecuador, using Pseudomonas bacteria. There are different methodologies and methods for soil remediation, the technique used for the recovery of soils contaminated with petroleum hydrocarbons in this research was bioremediation, through the application of an association of Pseudomonas bacteria obtained from the same soil, a technique called bio augmentation, and applied in three different concentrations and on the four soil samples obtained from the mechanics of the city of Cuenca. The Pseudomonas bacteria obtained, especially aeruginosa and fluorescence, demonstrated in the experimentation that they have the property of degrading hydrocarbons derived from petroleum, by feeding on carbon compounds in an exponential manner. For the calculation of the remediation cost-benefit, the value of the benefit acquired is divided by the remediation cost found. If the value is higher than the unit, the relation presents benefits; the relation obtained is 5.077, allowing to establish that the remediation process studied is economically viable. It is concluded that the method used is adequate and does not alter the soil with the introduction of foreign bacteria to it, in addition, the method studied serves for the remediation of soils contaminated with non-volatile petroleum hydrocarbons. The cost of its implementation is economically viable.

How Fe-bearing materials affect soil arsenic bioavailability to rice: A meta-analysis

Arsenic (As) contamination is widespread in soil and poses a threat to agricultural products and human health due to its high susceptibility to absorption by rice. Fe-bearing materials (Fe-Mat) display significant potential for reducing As bioavailability in soil and bioaccumulation in rice. However, the remediation effect of various Fe-Mat is often inconsistent, and the response to diverse environmental factors is ambiguous. Here, we conducted a meta-analysis to quantitatively assess the effects of As in soils, rice roots, and grains based on 673, 321, and 305 individual observations from 67 peer-reviewed articles, respectively. On average, Fe-Mat reduced As bioavailability in soils, rice roots, and grains by 28.74 %, 33.48 %, and 44.61 %, respectively. According to the analysis of influencing factors, the remediation efficiency of Fe-Mat on As-contaminated soil was significantly enhanced with increasing Fe content in the material, in which the industry byproduct was the most effective in soils (−42.31 %) and rice roots (−44.57 %), while Fe-biochar was superior in rice grains (−54.62 %). The efficiency of Fe-Mat in minimizing soil As mobility was negatively correlated with soil Fe content, CEC, and pH. In addition, applying Fe-Mat in alkaline soils with higher silt, lower clay and available P was more effective in reducing As in rice grains. A higher efficiency of applying Fe-Mat under continuous flooding conditions (27.39 %) compared with alternate wetting and drying conditions (23.66 %) was also identified. Our results offer an important reference for the development of remediation strategies and methods for various As-contaminated paddy soils.

Studies of oil product pollution in the aeration zone by mathematical modelling

Formulation of the problem. The article presents the results of a study to assess the pollution of the aeration zone due to the leakage of oil products as a result of the destruction of the «Amik» oil depot during the military operations in the town of Borodyanka. The destruction of the tanks resulted in an immediate leakage of light oil products onto the soil of the surrounding area. The result was a technogenic environmental situation that required immediate determination of the mechanisms of accidental penetration of pollutants into the soil and groundwater, determination of the area of contamination and scientifically sound methods of soil remediation of oil products. The article highlights the issues of organising mathematical modeling of various data for solving applied problems using Google Earth data. Materials and methods. In order to assess the contamination area and determine the mechanism of accidental penetration of oil products into the soil and groundwater, the existing models of pollutant penetration in case of accidental oil spill were analysed and mathematical spatial models of geomorphological, hydrogeological, engineering-geological and experimental filtration data were created using interpolation, mathematical approximation and gradient analysis. The latter made it possible to identify the directions of surface and groundwater flow both in the local area of the oil depot and in adjacent areas. Using the investigation and filtration parameters obtained during the field work, hydraulic gradients and soil filtration coefficients were calculated, and a spatial mathematical model of the local subterranean gradient of groundwater flow was created. Results. It was shown that the direction of the underground flow is controlled by a zone of local depression, which is expressed by a decrease in the absolute height of the natural lithological layer with a height difference of about 0.4 m or the maximum values of the height of the contamination lens. The direction of extension of this zone has been determined to be from north to south. This zone can be considered the zone of maximum accumulation of liquid with oil products. Based on the survey results, the thickness of the contamination lens was calculated to be 0.3 m on average. Using this indicator, the area of contamination is 4169 m2, the volume of contamination is 1250.7 m3, which corresponds to the claimed damage. However, taking into account the anisotropy of the filtration properties of the lithological types in different directions within the aeration zone, the presence of dissolved water due to dispersion and the presence of local accumulation depressions in the lithological strata, options with other indicators (0.5 m / 0.1 m) are also acceptable. The calculation of the contamination areas was carried out taking into account the power variations. The approximate total areas of oil product distribution in the aeration zone were plotted with reference to Google Earth imagery. Conclusions. The research enabled practical recommendations to be made for cleaning up the area of oil products and preventing the spread of the pollutant by pumping oil products out of the modelled and actually confirmed pollution lens. In accordance with the recommendations, 140 wells were drilled to a depth of 5.2 m, with a diameter of 0.11‑0.168 m and a total length of 710 m, which made it possible to prevent the spread of the contaminant by pumping out the oil products and reusing them after clean-up.

Complex Restoration of Oil-Contaminated Soils with New Organomineral Reagents

Among pollutants, petroleum hydrocarbons are recognized as the priority pollutants of the environment. Petroleum hydrocarbons can cause changes in the physical and chemical properties of soils, leading to a decrease in the functional activity of the microbiota of soil biocenoses. The aim of the study was to develop ways and methods of oil-contaminated soil remediation with the new generation sorbents based on organomineral biofertilizer “Kazuglegumus” and aluminum alloys activated by indium, gallium, and tin. The structure and composition of the organomineral reagents, as well as soils with different degrees of contamination were proved by Fourier transform infrared spectroscopy, scanning electron microscopy, energy dispersive X-ray spectroscopy, differential scanning calorimetry, and thermogravimetry. As a working hypothesis, it was accepted that the aluminum alloy activated by gallium, indium, and tin forms complex compounds with humic or fulvic acids, which are low-toxic or non-toxic for plants. The efficiency of cleaning oil-contaminated soils with organomineral sorbents was evaluated. The reduction of oil concentration in soil samples by 12–22% depending on the concentration of reagents and oil content in soil was revealed. The character of oil pollution impact on plants of legume families alfalfa, melilot, and sainfoin, which are characterized by the ability to accumulate and then give nitrogen to the soil, was studied. The phytotoxicity of uncontaminated and non-oil-contaminated soils was studied in laboratory and field conditions. Significantly accelerated plant growth was observed in samples of oil-contaminated soil after treatment with sorbent based on activated aluminum alloy Rau-85 and fertilizer “Kazuglegumus”. The plants had stronger root systems. These experiments are explained by the effect of Rau-85 alloys in favor of reducing the oil concentration to the normalized limits, as well as the transformation of natural humic substances and additionally applied fertilizer “Kazuglegumus” (potassium humates), which increased their biological activity.

Evaluation of newly designed flushing techniques for on-site remediation of arsenic-contaminated excavated debris.

Excavated debris (soil and rock) contaminated with geogenic arsenic (As) is an increasing concern for regulatory organizations and construction stakeholders. Chelator-assisted soil flushing is a promising method for practical on-site remediation of As-contaminated soil, offering technical, economic, and environmental benefits. Ethylenediaminetetraacetic acid (EDTA) is the most prevalent chelator used for remediating As-contaminated soil. However, the extensive environmental persistence and potential toxicity of EDTA necessitate the exploration of eco-compliant alternatives. In this study, the feasibility of the conventional flushing method pump-and-treat and two newly designed immersion and sprinkling techniques were evaluated at the laboratory scale (small-scale laboratory experiments) for the on-site treatment of As-contaminated excavated debris. Two biodegradable chelators, L-glutamic acid-N,N'-diacetic acid (GLDA) and 3-hydroxy-2,2'-iminodisuccinic acid (HIDS), were examined as eco-friendly substitutes for EDTA. Additionally, this study highlights a useful post-treatment measure to ensure minimal mobility of residual As in the chelator-treated debris residues. The pump-and-treat method displayed rapid As-remediation (t, 3h), but it required a substantial volume of washing solution (100mLg-1). Conversely, the immersion technique demonstrated an excellent As-extraction rate using a relatively smaller washing solution (0.33mLg-1) and shorter immersion time (t, 3h). In contrast, the sprinkling technique showed an increased As-extraction rate over an extended period (t, 48h). Among the chelators employed, the biodegradable chelator HIDS (10mmol L-1; pH, 3) exhibited the highest As-extraction efficiency. Furthermore, the post-treatment of chelator-treated debris with FeCl3 and CaO successfully reduced the leachable As content below the permissible limit.

Pesticide Soil Pollution: An Overview about Advantages and Disadvantages of Different Remediation Technologies

The use of pesticides presents a looming danger to the living elements of our ecological system, crops, and the well-being of our species. As an outcome, various organic contaminants pollute the soil. Different physical, chemical, and biological remediation techniques have been employed for the decontamination of pesticide-polluted soils. Remediation technology should always be affordable, on-site or in-situ, and capable of restoring the soil's natural functionality. The presence of multiple pesticides can pose challenges in effectively remediating them from the soil. The present work examines the scientific literature on the benefits and drawbacks of various existing and emerging soil remediation techniques. Customized technology choices and designs for specific site conditions enhance the effective cleanup of polluted areas. The present study, which evaluates and contrasts various technological approaches, shall serve as an invaluable tool for determining the optimal soil remediation method for a given contamination dilemma.

Biochar applications for treating potentially toxic elements (PTEs) contaminated soils and water: a review.

Environmental pollution with potentially toxic elements (PTEs) has become one of the critical and pressing issues worldwide. Although these pollutants occur naturally in the environment, their concentrations are continuously increasing, probably as a consequence of anthropic activities. They are very toxic even at very low concentrations and hence cause undesirable ecological impacts. Thus, the cleanup of polluted soils and water has become an obligation to ensure the safe handling of the available natural resources. Several remediation technologies can be followed to attain successful remediation, i.e., chemical, physical, and biological procedures; yet many of these techniques are expensive and/or may have negative impacts on the surroundings. Recycling agricultural wastes still represents the most promising economical, safe, and successful approach to achieving a healthy and sustainable environment. Briefly, biochar acts as an efficient biosorbent for many PTEs in soils and waters. Furthermore, biochar can considerably reduce concentrations of herbicides in solutions. This review article explains the main reasons for the increasing levels of potentially toxic elements in the environment and their negative impacts on the ecosystem. Moreover, it briefly describes the advantages and disadvantages of using conventional methods for soil and water remediation then clarifies the reasons for using biochar in the clean-up practice of polluted soils and waters, either solely or in combination with other methods such as phytoremediation and soil washing technologies to attain more efficient remediation protocols for the removal of some PTEs, e.g., Cr and As from soils and water.

Combination of Biochar and Trichoderma harzianum Can Improve the Phytoremediation Efficiency of Brassica juncea and the Rhizosphere Micro-Ecology in Cadmium and Arsenic Contaminated Soil.

Phytoremediation is an environment-friendly method for toxic elements remediation. The aim of this study was to improve the phytoremediation efficiency of Brassica juncea and the rhizosphere soil micro-ecology in cadmium (Cd) and arsenic (As) contaminated soil. A field experiment was conducted with six treatments, including a control treatment (CK), two treatments with two contents of Trichoderma harzianum (T1: 4.5 g m-2; T2: 9 g m-2), one biochar treatment (B: 750 g m-2), and two combined treatments of T1B and T2B. The results showed Trichoderma harzianum promoted the total chlorophyll and translocation factor of Brassica juncea, while biochar promoted plant biomass compared to CK. T2B treatment showed the best results, which significantly increased Cd accumulation by 187.49-308.92%, and As accumulation by 125.74-221.43%. As a result, the soil's total Cd content was reduced by 19.04% to 49.64% and total As contents by 38.76% to 53.77%. The combined amendment increased the contents of soil available potassium, phosphorus, nitrogen, and organic matter. Meanwhile, both the activity of glutathione and peroxidase enzymes in plants, together with urease and sucrase enzymes in soil, were increased. Firmicutes (dominant bacterial phylum) and Ascomycota (dominant fungal phylum) showed positive and close correlation with soil nutrients and plant potentially toxic elements contents. This study demonstrated that phytoremediation assisted by biochar and Trichoderma harzianum is an effective method of soil remediation and provides a new strategy for enhancing plant remediation efficiency.

Lab-scale transport and activation of peroxydisulfate for phenanthrene degradation in soil: A comprehensive assessment of the remediation process, soil environment and microbial diversity

Electrokinetic transport followed by electrical resistance heating activation of peroxydisulfate is a novel in situ soil remediation method. However, the strategy of electrokinetic transport coupled with electrical resistance heating and the comprehensive evaluation of restored soil need to be further explored. In this study, a lab-scale simulation device for in situ electrokinetic transport coupled with electrical resistance heating activation of peroxydisulfate was constructed to monitor the transport and transfer of peroxydisulfate, target pollutants, and process parameters, and the physicochemical properties and bacterial community of treated soil were evaluated. The results showed that adding 10 wt% peroxydisulfate to both the anode and cathode resulted in the optimized transfer rate and cumulative concentration of peroxydisulfate under electrokinetics. After 8 h, the cumulative concentration of peroxydisulfate reached 66.15– 166.29 mmol L−1, which was attributed to the migration of a large amount of S2O82− from the cathode to the soil under electromigration. Additionally, the anodic interfacial electric potential was improved, which was more conducive to electroosmotic transport of peroxydisulfate from the anode chamber. By alternating electrokinetic transport and electrical resistance heating activation of peroxydisulfate for two cycles, the phenanthrene degradation efficiency in four evenly distributed wells between electrodes reached 75.4 %, 87.6 %, 92.3 %, and 94.4 %. With slight variations in soil morphology and structure, the electrokinetic transport coupled with electrical resistance heating activation of peroxydisulfate elevated the soil fertility index. The abundance and diversity of bacterial communities in treated soil recovered to above the original soil level after 15 days. Our findings may support the application of electrokinetic transport coupled with electrical resistance heating activation of peroxydisulfate as a promising green ecological technology for the in situ remediation of organic-contaminated soil.

Research on Soil Pollution Channels and Remediation Methods in Farmland

Research on Soil Pollution Channels and Remediation Methods in Farmland

Bayesian network highlights the contributing factors for efficient arsenic phytoextraction by Pteris vittata in a contaminated field

Phytoextraction is a low-cost and eco-friendly method for removing pollutants, such as arsenic (As), from contaminated soil. One of the most studied As hyperaccumulators for soil remediation include Pteris vittata. Although phytoextraction using plant-assisted microbes has been considered a promising soil remediation method, microbial harnessing has not been achieved due to the complex and difficult to understand interactions between microbes and plants. This problem can possibly be addressed with a multi-omics approach using a Bayesian network. However, limited studies have used Bayesian networks to analyze plant–microbe interactions. Therefore, to understand this complex interaction and to facilitate efficient As phytoextraction using microbial inoculants, we conducted field cultivation experiments at two sites with different total As contents (62 and 8.9 mg/kg). Metabolome and microbiome data were obtained from rhizosphere soil samples using nuclear magnetic resonance and high-throughput sequencing, respectively, and a Bayesian network was applied to the obtained multi-omics data. In a highly As-contaminated site, inoculation with Pseudomonas sp. strain m307, which is an arsenite-oxidizing microbe having multiple copies of the arsenite oxidase gene, increased As concentration in the shoots of P. vittata to 157.5 mg/kg under this treatment; this was 1.5-fold higher than that of the other treatments. Bayesian network demonstrated that strain m307 contributed to As accumulation in P. vittata. Furthermore, the network showed that microbes belonging to the MND1 order positively contributed to As accumulation in P. vittata. Based on the ecological characteristics of MND1, it was suggested that the rhizosphere of P. vittata inoculated with strain m307 was under low-nitrogen conditions. Strain m307 may have induced low-nitrogen conditions via arsenite oxidation accompanied by nitrate reduction, potentially resulting in microbial iron reduction or the prevention of microbial iron oxidation. These conditions may have enhanced the bioavailability of arsenate, leading to increased As accumulation in P. vittata.

Propylene glycol-mixed steam enhanced extraction for an efficient and sustainable remediation of PAHs-contaminated soil

An innovative thermal desorption method, propylene glycol (PG)-mixed steam enhanced extraction, is proposed for a highly efficient remediation of polycyclic aromatic hydrocarbons (PAHs)-contaminated soil. It is found that injecting PG-mixed steam into soil column could obtain > 99% removal efficiencies of PAHs either for the pyrene-spiked soil, or for the contaminated field soil with high-molecular-weight PAHs. PG is a safe and low-cost dihydric alcohol with a boiling point higher than water. When the PG-mixed steam penetrated the contaminated soil, the PG vapor preferentially condensed to form a hot liquid with concentrated PG (e.g., from 30 wt% PG in gas phase to 90 wt% PG in the liquid phase), which would significantly solubilize the PAHs and enhance their desorption from soils. The results also revealed that the effluents derived from the PG-mixed steam could be purified by removing the desorbed PAHs using a simple coagulation treatment, and the recovered PG solution could be reused. The plant assay using wheat seeds showed that the remediated soil had a good regreening potential. Our results demonstrate that PG-mixed steam injection is a promising thermal desorption method for an efficient and sustainable remediation of PAHs-contaminated soil.

Iron-Based Amorphous Alloy Enhanced Electrokinetic Method for Remediation of Copper-Contaminated Soil

Iron-Based Amorphous Alloy Enhanced Electrokinetic Method for Remediation of Copper-Contaminated Soil

Approximate analytical solution to the axisymmetric model for PVD-enhanced in-situ flushing of double-layered contaminated soils

The in-situ soil flushing technique which utilizes prefabricated vertical drains (PVDs) is an effective remediation method for sandy, silt, and low-permeability clayey soils. It offers several advantages, such as reducing the seepage path, achieving uniform flushing of contaminated areas, and shortening the construction time. This paper proposes an axisymmetric analytical model for PVD-enhanced in-situ flushing remediation of double-layered contaminated soils considering the decay of the initial contaminant concentration along the depth. The derived solutions are then verified against experimental results and existing analytical solutions. The accuracy of the simplified solution is found to improve as the number of stratifications increases by vertically dispersing the initial contaminant concentration, as compared to the numerical results obtained from COMSOL Multiphysics. The study also reveals that a decrease in the spacing between adjacent injection and extraction PVDs or an increase in the injection/extraction rate enhances the flushing efficiency. However, the effects of the two parameters on soil remediation are non-linear and linear, respectively. Furthermore, the difference in the geotechnical properties of the upper soil layers in a bi-layered contaminated soil leads to a variation in the contaminant concentration at any depth and this variation grows larger with time until the soil is completely remediated.